Item | Description |
---|---|
AdminState |
Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `Priority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface state. |
OperState |
The current state of the virtual router. There are three defined values:
|
AuthType |
Authentication type used for VRRP protocol exchanges between virtual routers. |
AuthKey |
The Authentication Key. When read, AuthKey always returns an empty string. |
Priority |
Specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0' is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). |
AdInterval |
The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
PreemptMode |
Controls whether a higher priority virtual router will preempt a lower priority master. |
UpTime |
When this virtual router transitioned out of `initialized'. |