Table Of Contents
Managing Fibre Channel Routing and FSPF
Configuring Fibre Channel Routes
Configuring Fibre Channel Route Flows
Managing FSPF General Attributes
Configuring FSPF Interfaces
Viewing FSPF Statistics
Viewing FSPF Interface Statistics
Viewing Link State Records
Viewing FSPF Links
Managing Fibre Channel Routing and FSPF
Fabric Shortest Path First (FSPF) is the standard path selection process used by Fibre Channel fabrics. FSPF automatically calculates the best path between any two switches in the fabric. All routes across the fabric are established when switches are powered up. These routes do not change unless there is a failure or unless a new ISL (or EISL) is created that offers a path equal to or better than an existing path.
The Fabric Manager allows you to configure and monitor these routing services on multiple Cisco 9000 switches. The Device Manager allows you to configure and monitor Fibre Channel routing and FSPF on a single Cisco 9000 switch. For information about Fibre Channel routing and how to configure routing and FSPF using the command line interface (CLI), refer to the Cisco 9000 Family Configuration Guide.
Procedures for configuring Fibre Channel Routing include:
•Configuring Fibre Channel Routes
•Configuring Fibre Channel Route Flows
Procedures for configuring FSPF include:
•Managing FSPF General Attributes
•Configuring FSPF Interfaces
•Viewing FSPF Statistics
•Viewing FSPF Interface Statistics
•Viewing Link State Records
•Viewing FSPF Links
Configuring Fibre Channel Routes
To configure Fibre Channel routes, do the following:
Step 1 From the Device Manager, choose Routes from the FC menu. The dialog box displays routes for a single switch.
Step 2 Configure the attributes for the route.
Step 3 To add a route from Device Manager, click Create on the dialog box.
You see the Create Route dialog box.
Step 4 Click the button to the right of the Interface field and select the interface on which to configure the Fibre Channel route.
Step 5 Complete the other fields on this window and click OK to add a route.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
Configuring Fibre Channel Route Flows
To view Fibre Channel flows, do the following:
Step 1 From the Fabric Manager, choose FC > Route Flow Statistics on the menu tree. The Information pane from Fabric Manager displays flows for multiple switches.
From the Device View, choose Routes from the FC menu and click the Flow Statistics tab. The dialog box from the Device Manager displays flows for a single switch.
Step 2 Configure the flow attributes for the route.
Step 3 To add a route flow from Fabric Manager, click Create Row on the toolbar.
To add a route flow from Device Manager, click Create on the dialog box.
The Create Route flow dialog is displayed.
Step 4 Complete the fields on this window and click Create to add a route flow.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
Managing FSPF General Attributes
To manage FSPF general attributes, do the following:
Step 1 From the Fabric Manager, choose FC > FSPF on the menu tree and click the General tab.
From the Device Manager, choose FSPF from the FC menu and click the General tab.
The Information pane from the Fabric Manager displays information for multiple switches. The dialog box from the Device Manager displays FSPF information for a single switch.
Step 2 Configure the FSPF general attributes.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
Configuring FSPF Interfaces
To configure FSPF interfaces, do the following:
Step 1 From the Fabric Manager, choose FC > FSPF on the menu tree and click the Interfaces tab.
To configure FSPF interfaces from the Device Manager, choose FSPF from the FC menu and click the Interfaces tab.
Step 2 Configure the attributes for the FSPF interfaces.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
Viewing FSPF Statistics
To monitor FSPF statistics from the Fabric Manager, choose FC > FSPF on the menu tree and click the Statistics tab.
To monitor FSPF statistics from the Device Manager, choose FSPF from the FC menu and click the Statistics tab.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
Viewing FSPF Interface Statistics
To monitor FSPF interface statistics from the Fabric Manager, choose FC > FSPF on the menu tree and click the Interface Stats tab.
To monitor FSPF interface statistics from the Device Manager, choose FSPF from the FC menu and click the Interface Stats tab.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
Viewing Link State Records
To monitor FSPF LSRs from the Device Manager, choose FSPF from the FC menu and click the LSDB LSRs tab.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.
Viewing FSPF Links
To view FSPF links from the Device Manager, choose FSPF from the FC menu and click the LSDB Links tab.
Note You can access the field descriptions for the windows or dialog boxes in this procedure in the Reference section of the Fabric Manager or Device Manager help systems.