Table Of Contents
Technical Specifications
Switch Specifications
Module Specifications
Weight of Modules
Power Specifications
Specifications for the Cisco MDS 9200 Series Power Supplies
Component Power Requirements and Heat Dissipation Specifications
X2 Transceiver Specifications
Cisco 10-Gbps Fibre Channel X2 Transceivers
General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
Environmental Conditions and Power Requirement Specifications for Cisco 10-Gbps Fibre Channel X2 Transceivers
Cisco 10-Gbps Ethernet X2 Transceivers
General Specification for Cisco 10-Gbps Ethernet X2 Transceivers
Environmental and Power Requirements Specifications for Cisco 10-Gbps Ethernet X2 Transceiver
SFP Transceiver Specifications
Cisco Fibre Channel SFP Transceivers
General Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
Environmental and Power Requirement for Cisco 4-Gbps Fibre Channel SFP Transceivers
General Specifications for Cisco 2-Gbps Fibre Channel SFP Transceivers
Environmental and Power Requirement for Cisco 2-Gbps Fibre Channel SFP Transceivers
Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers
Cisco Fibre Channel/Gigabit Ethernet Transceivers
General Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
Environmental and Power Requirement Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
Cisco CWDM SFP Transceivers
Environmental and Optical Specifications for Cisco 2-Gbps CWDM SFP Transceivers
Environmental and Optical Specifications for Cisco 4-Gbps CWDM SFP Transceivers
Cisco Gigabit Ethernet Transceivers
General Specifications for Cisco Gigabit Ethernet Transceivers
Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet Transceivers
DWDM Fibre Channel SFP Transceivers
Technical Specifications
This appendix includes the following sections:
•
Switch Specifications
•Module Specifications
•Power Specifications
•X2 Transceiver Specifications
•SFP Transceiver Specifications
Note Specifications for cables and connectors are provided in Appendix C, "Cable and Port Specifications."
Switch Specifications
This section provides switch specifications for theCisco MDS 9200 Series.
Table B-1 lists the environmental specifications for the Cisco MDS 9200 Series.
Table B-1 Environmental Specifications for the Cisco MDS 9200 Series
Description
|
Specification
|
Temperature, certified for operation
|
32 to 104°F (0 to 40°C)
|
Temperature, designed and tested for operation
|
32 to 130°F (0 to 55°C)
|
Temperature, ambient nonoperating and storage
|
-40 to 158°F (-40 to 70°C)
|
Humidity (RH), ambient (noncondensing) operating
|
10 to 90%
|
Humidity (RH), ambient (noncondensing) nonoperating and storage
|
5 to 95%
|
Altitude, certified for operation
|
0 to 6500 ft (0 to 2000 m)
|
Altitude, designed and tested for operation
|
-200 to 10000 ft (-60 to 3000 m)
|
Noise levels
|
70 dB
|
Table B-2 lists the physical specifications for the Cisco MDS 9200 Series.
Table B-2 Physical Specifications for the Cisco MDS 9200 Series
Description
|
Specification
|
Dimensions (HxWxD)
|
5.25 x 17.5 x 22.75 in. (13.3 x 44.5 x 57.8 cm)
Chassis requires 3 RU1 .
Chassis depth including cable guide is 27.75 in. (70.3 cm).
|
Weight
|
Chassis only: 31 lb (14.1 kg).
Chassis configured with one supervisor module, fan module, and two power supplies: 53.3 lb (24.3 kg).
|
Power supply
|
845-W AC input for each power supply
|
Airflow
|
300 lfm2 through system fan module, or 80 cfm3 per supervisor, switching, or services module. Total of 160 cfm if slot 2 is filled.
Spacing requirements:
•If installed in a cabinet, a minimum of 2.5 in. (6.4 cm) is required between the chassis air vents and the cabinet walls.
•If installed in an open rack (no side panels), the horizontal distance required between the chassis and any devices that exhaust air towards the chassis is a minimum of 6 in. (15.2 cm), and the distance required between the chassis air vents and any walls is a minimum of 2.5 in. (6.4 cm).
|
Table B-3 lists the specifications for the Cisco MDS 9200 Series supervisor module (which is fixed in the chassis) and the switching and services modules.
Module Specifications
This section provides the Cisco MDS 9200 Series module specifications.
Table B-3 Cisco MDS 9200 Series Module Specifications
Description
|
Specification
|
Environmental Requirements
|
Temperature, certified for operation
|
32 to 104°F (0 to 40°C)
|
Temperature, designed and tested for operation
|
32 to 130°F (0 to 55°C)
|
Temperature, ambient nonoperating and storage
|
-40 to 167°F (-40 to 75°C)
|
Humidity (RH), ambient (noncondensing) operating
|
10 to 90%
|
Altitude, certified for operation
|
0 to 6500 ft (0 to 2000 m)
|
Altitude, designed and tested for operation
|
-200 to 10000 ft (-60 to 3000 m)
|
Physical Characteristics
|
Dimensions
|
1.75 x15.5 x16.5 in. (4.4 x 39.4 x 41.9 cm)
Note These are the maximum dimensions of faceplate and board, and include connectors on board.
|
Weight
|
8 to 11.5 lb (1.4 to 5.2 kg)
|
Table B-4 lists the specifications for the batteries on the Cisco MDS 9000 Family Caching Services Module.
Table B-4 Caching Services Module Battery Specifications
Description
|
Specification
|
Nominal voltage
|
9.6 V
|
Rated capacity
|
Typical discharge capacity at 0.2C rate: 2100 mAh
|
Minimum discharge capacity at 0.2C rate: 2000 mAh
|
Minimum discharge capacity at 5C rate: 1800 mAh
(1V/cell discharge cut-off)
|
Discharge
|
The battery is capable of continuous discharge from (41 to 140°F (5 to +60°C)at 5C-rate
|
Charge
|
From 32 to 59°F (0 to 15°C) at C/10 rate and from 59 to 104°F (15 to 40°C) at C/2-rate
|
Storage temperature
|
32 to 95°F (0 to 35°C)
|
Relative humidity range
|
From 5 to 90%
|
Weight of Modules
Table B-5 lists the weight for each module in the Cisco MDS 9000 Family.
Table B-5 Weight of Modules in the Cisco MDS 9000 Family
Module
|
Weight
|
48-port 4-Gbps switching module
|
11.0 lb (4.99 kg)
|
24-port 4-Gbps switching module
|
7.75 lb (3.5 kg)
|
12-port 4-Gbps switching module
|
7.5 lb (3.40 kg)
|
4-Port 10-Gbps switching module
|
8.5 lb (3.86 kg)
|
32-port FC switching module
|
9 lb (4.1 kg)
|
16-port FC switching module
|
9 lb (4.1 kg)
|
SSM
|
11 lb (5 kg)
|
CSM
|
11.5 lb (5.2 kg)
|
ASM
|
11 lb (5 kg)
|
IPS-8
|
10 lb (4.5 kg)
|
IPS-4
|
9 lb (4.1 kg)
|
MSM-18/4
|
8.5 lb (3.86 kg)
|
MSFM-18/4
|
8.5 lb (3.86 kg)
|
MPS-14/2
|
10 lb (4.5 kg)
|
Supervisor-2 for MDS 9500 Series
|
7.25 lb (kg)
|
Supervisor-1 for MDS 9500 Series
|
9 lb (4.1 kg)
|
Supervisor for MDS 9200 Series
|
9 lb (4.1 kg)
|
Module blank panels
|
0.50 lb (0.25 kg)
|
Power Specifications
This section includes the following topics:
•Specifications for the Cisco MDS 9200 Series Power Supplies
•Component Power Requirements and Heat Dissipation Specifications
Specifications for the Cisco MDS 9200 Series Power Supplies
Table B-6 lists the specifications for the Cisco MDS 9200 Series power supply, which is 845 W and accepts AC input.
Table B-6 Specifications for the Cisco MDS 9200 Series Power Supply
Description
|
|
Voltage
|
100 to 240 VAC (±10%)
|
Current rating
|
12 A at 100 to 120 VAC
5 A at 200 to 240 VAC
|
Frequency
|
50/60 Hz (nominal) (±3 Hz for full range)
|
Output capacity
|
845 W
|
Output voltage
|
+3.3 V at 10 A
+50 V at 16.2 A
|
Component Power Requirements and Heat Dissipation Specifications
Consider heat dissipation when sizing the air-conditioning requirements for an installation. The power and heat associated with a Cisco MDS 9200 Series varies based upon the following considerations:
•Switching module type and number of switching modules installed
•Average switching traffic levels
Table B-7 lists the power requirements and heat dissipation for the components of the Cisco MDS 9200 Series.
Note Unless noted otherwise, the data in Table B-7 is based on worst-case conditions. Typical numbers are approximately 30 percent below the numbers listed here.
Table B-7 Power Requirements and Heat Dissipation for the 845-W Power Supply
Module Type /
Product Number
|
SAN-OS Release
|
Power Required (watts)
|
Heat Dissipation (BTU/hr)
|
Input Current
|
90 VAC (amps)
|
120 VAC (amps)
|
180 VAC (amps)
|
240 VAC (amps)
|
Cisco MDS 9222i chassis with fan module DS-C9222i-K9
|
3.2(1)
|
60
|
256
|
0.83
|
0.63
|
0.42
|
0.31
|
Cisco MDS 9222i fixed supervisor module (18-port Fibre Channel and 4-port Gigabit Ethernet module)
|
3.2(1)
|
200
|
855
|
2.78
|
2.08
|
1.39
|
1.04
|
Cisco MDS 9216i chassis with fan module DS-C9216i-K9
|
3.x
|
60
|
256
|
0.83
|
0.63
|
0.42
|
0.31
|
2.x and 1.x
|
38
|
164
|
0.53
|
0.40
|
0.27
|
0.20
|
Cisco MDS 9216A chassis with fan module DS-C9216A-K9
|
3.x
|
60
|
256
|
0.83
|
0.63
|
0.42
|
0.31
|
2.x and 1.x
|
38
|
164
|
0.53
|
0.40
|
0.27
|
0.20
|
Cisco MDS 9216i fixed supervisor module (14-port Fibre Channel and 2-port Gigabit Ethernet module)
|
3.x
|
200
|
854
|
2.78
|
2.08
|
1.39
|
1.04
|
2.x and 1.x
|
227
|
970
|
3.15
|
2.37
|
1.57
|
1.19
|
Cisco MDS 9216A fixed supervisor module (16-port Fibre Channel module, 1Gbps/2Gbps)
|
3.x
|
210
|
897
|
2.92
|
2.19
|
1.46
|
1.09
|
2.x and 1.x
|
220
|
940
|
305
|
2.29
|
1.53
|
1.15
|
48-port 4-Gbps switching module, DS-X9148
|
3.x
|
185
|
790
|
2.57
|
1.93
|
1.28
|
0.96
|
2.x and 1.x
|
—
|
—
|
—
|
—
|
—
|
—
|
24-port 4-Gbps switching module, DS-X9124
|
3.x
|
147
|
628
|
2.04
|
1.53
|
1.02
|
0.77
|
2.x and 1.x
|
—
|
—
|
—
|
—
|
—
|
—
|
12-port 4-Gbps switching module, DS-X9112
|
3.x
|
132
|
564
|
1.83
|
1.38
|
0.92
|
0.69
|
2.x and 1.x
|
—
|
—
|
—
|
—
|
—
|
—
|
4-Port 10-Gbps switching module, DS-X9704
|
3.x
|
172
|
734
|
2.39
|
1.79
|
1.19
|
0.90
|
2.x and 1.x
|
—
|
—
|
—
|
—
|
—
|
—
|
32-port 1-Gbps/2-Gbps Fibre Channel module, DS-X9032
|
3.x
|
191
|
816
|
2.65
|
1.99
|
1.33
|
0.99
|
2.x and 1.x
|
200
|
855
|
2.78
|
2.08
|
1.39
|
1.04
|
16-port 1-Gbps/2-Gbps Fibre Channel module, DS-X9016
|
3.x
|
210
|
897
|
2.92
|
2.19
|
1.46
|
1.09
|
2.x and 1.x
|
200
|
940
|
3.05
|
2.29
|
1.53
|
1.15
|
MSM-18/4 module DS-X9304-18K9
|
3.2(1)
|
200
|
855
|
2.78
|
2.08
|
1.39
|
1.04
|
MSFM-18/4 module DS-X9304-18FK9
|
3.2(1)
|
200
|
855
|
2.78
|
2.08
|
1.39
|
1.04
|
MPS-14/2 DS-X9302-14K9
|
3.x
|
200
|
854
|
2.78
|
2.08
|
1.39
|
1.04
|
2.x and 1.x
|
227
|
970
|
3.15
|
2.37
|
1.57
|
1.19
|
8-port IPS module
DS-X9308-SMIP
|
3.x
|
200
|
854
|
2.78
|
2.08
|
1.39
|
1.04
|
2.x and 1.x
|
220
|
940
|
3.05
|
2.29
|
1.53
|
1.15
|
4-port IPS module
DS-X9304-SMIP
|
3.x
|
160
|
683
|
2.22
|
1.67
|
1.11
|
0.83
|
2.x and 1.x
|
185
|
789
|
2.57
|
1.93
|
1.28
|
0.96
|
32-port SSM,
DS-X9032-SSM
|
3.x
|
281
|
1200
|
3.90
|
2.93
|
1.95
|
1.46
|
2.x and 1.x
|
295
|
1260
|
4.10
|
3.07
|
2.05
|
1.54
|
32-port ASM
DS-X9032-SMV
|
3.x
|
281
|
1200
|
3.90
|
2.93
|
1.95
|
1.46
|
2.x and 1.x
|
295
|
1260
|
4.10
|
3.07
|
2.05
|
1.54
|
CSM,
DS-X9560-SMC
|
3.x
|
200
|
854
|
2.78
|
2.08
|
1.39
|
1.04
|
2.x and 1.x
|
210
|
907
|
2.95
|
2.22
|
1.48
|
1.11
|
X2 Transceiver Specifications
The Cisco MDS 9200 Series is compatible with X2 transceivers and cables that have SC connectors. Each transceiver must match the transceiver on the other end of the cable in terms of wavelength, and the cable must not exceed the stipulated cable length for reliable communications.
Use only Cisco X2 transceivers on the Cisco MDS 9200 Series. Each Cisco X2 transceiver is encoded with the model information that enables the switch to verify that the SFP transceiver meets the requirements for the switch.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
Cisco 10-Gbps Fibre Channel X2 Transceivers
Table B-8 lists the Cisco10-Gbps Fibre Channel X2 transceivers.
Table B-8 Cisco 10-Gbps Fibre Channel X2 Transceivers
Transceiver Module Product Number
|
Description
|
Type
|
DS-X2-FC10G-SR
|
10-Gbps Fibre Channel SR, X2, SC
|
Short Reach
|
DS-X2-FC10G-LR
|
10-Gbps Fibre Channel LR, X2, SC
|
Long Reach
|
DS-X2-FC10G-ER
|
10-Gbps Fiber Channel ER, X2, SC
|
Extended Reach
|
DS-X2-FC10G-CX4
|
10-Gbps Fiber Channel Copper, X2, CX4
|
-
|
General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
Table B-9 provides the general specifications for Cisco 10-Gbps Fibre Channel X2 transceivers.
Table B-9 General Specifications for the Cisco 10-Gbps Fibre Channel X2 Transceivers
X2
|
Wavelength
(nanometer)
|
Fibre Type
|
Core Size
(micon)
|
Baud Rate
(GBd)
|
Cable Distance
|
DS-X2-FC10G-SR
|
850
|
MMF
|
62.5
|
10.51875
|
33 m (108 ft)
|
50.0 (OM3)
|
10.51875
|
300 m (984 ft)
|
DS-X2-FC10G-LR
|
1310
|
SMF
|
9.0
|
10.51875
|
24.8 miles (40 km)
|
DS-X2-FC10G-ER
|
1550
|
SMF
|
9.0
|
10.51875
|
6.2 miles (10 km)
|
DS-X2-FC10G-CX4
|
-
|
Copper
|
-
|
10.51875
|
15 m (49.2 ft)
|
Note The minimum cable distance for all the transceivers such as, multi mode fiber (MMF) and single-mode fiber (SMF), except CX4 is 2 meters (6.5 feet).
Environmental Conditions and Power Requirement Specifications for Cisco 10-Gbps Fibre Channel X2 Transceivers
Table B-10 provides the power requirement specifications for Cisco 10-Gbps Fibre Channel X2 transceivers.
Table B-10 Power Requirement Specifications for Cisco 10-Gbps Fibre Channel X2 Transceivers
X2
|
Average Transmit Power (dBm)
|
Average Receive
Power (dBm)
|
Fiber Loss Budget (dBm)
|
| |
Maximum
|
Minimum
|
Maximum
|
Minimum
|
|
DS-X2-FC10G-SR
|
-1.2
|
-7.3
|
-1.0
|
-9.9
|
2.6 (50.0 micron-OM3)
|
DS-X2-FC10G-LR
|
0.5
|
-8.2
|
0.5
|
-14.4
|
6.2
|
DS-X2-FC10G-ER
|
4.0
|
-4.7
|
-1.0
|
-15.8
|
11.1
|
Note DS-X2-FC10G-CX4 is not an optical module; therefore, it is not listed in Table B-10.
Table B-11 provides the environmental specifications for the Cisco 10-Gbps Fibre Channel X2 transceivers.
Table B-11 Environmental Specifications for the Cisco 10- Gbps Fibre Channel X2 Transceivers
X2
|
Operating
|
Storage
|
| |
Maximum
|
Minimum
|
Maximum
|
Minimum
|
DS-X2-FC10G-SR
|
40°C
|
0°C
|
85°C
|
-40°C
|
DS-X2-FC10G-LR
|
40°C
|
0°C
|
85°C
|
-40°C
|
DS-X2-FC10G-ER
|
40°C
|
0°C
|
85°C
|
-40°C
|
DS-X2-FC10G-CX4
|
40°C
|
0°C
|
85°C
|
-40°C
|
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
Cisco 10-Gbps Ethernet X2 Transceivers
Table B-12 lists the Cisco 10-Gbps Ethernet X2 transceivers.
Table B-12 Cisco 10-Gbps Ethernet X2 Transceivers
Transceiver Module Product Number
|
Description
|
Type
|
DS-X2-E10G-SR
|
10-Gbps Ethernet Short Reach, X2, SC
|
Short reach
|
General Specification for Cisco 10-Gbps Ethernet X2 Transceivers
Table B-13 provides the general specifications for Cisco 10-Gbps Ethernet X2 transceivers.
Table B-13 General Specifications for the Cisco 10-Gbps Ethernet X2 Transceivers
X2
|
Wavelength
(nanometer)
|
Fiber Type
|
Core Size
(micon)
|
Baud Rate
(GBd)
|
Cable Distance
|
DS-X2-E10G-SR
|
850
|
MMF
|
62.5
|
10.3125
|
33 (108 ft)
|
50.0 (OM3)
|
10.3125
|
300 (984 ft)
|
Note The minimum cable distance for the MMF transceiver listed above is 2 meters (6.5 feet).
Environmental and Power Requirements Specifications for Cisco 10-Gbps Ethernet X2 Transceiver
Table B-14 provides the power requirement specifications for the Cisco 10-Gbps Ethernet X2 transceiver.
Table B-14 Power Requirement Specification for Cisco 10-Gbps Ethernet X2 Transceivers
X2
|
Average Transmit
Power (dBm)
|
Average Receive
Power (dBm)
|
Fiber Loss Budget (dBm)
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
|
DS-X2-E10G-SR
|
-1.2
|
-7.3
|
-1.0
|
-9.9
|
2.6 (50.0 micron-OM3)
|
Table B-15 provides the environmental specifications for the Cisco 10-Gbps Ethernet X2 transceivers.
Table B-15 Environmental Specifications for Cisco 10-Gbps Ethernet X2 Transceiver
X2
|
Operating
|
Storage
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
DS-X2-E10G-SR
|
40°C
|
0°C
|
85°C
|
-40°C
|
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
SFP Transceiver Specifications
The Cisco MDS 9200 Series is compatible with SFP transceivers and cables that have LC connectors. Each transceiver must match the transceiver on the other end of the cable in terms of wavelength, and the cable must not exceed the stipulated cable length for reliable communications.
Cisco SFP transceivers provide the uplink interfaces, laser transmit (TX) and laser receive (RX), and support 850 to 1610 nm nominal wavelengths, depending upon the transceiver.
Use only Cisco SFP transceivers on the Cisco MDS 9200 Series. Each Cisco SFP transceiver is encoded with model information that enables the switch to verify that the SFP transceiver meets the requirements for the switch.
Note Generation 2 modules will not support 1-Gbps/2-Gbps SFPs. Generation 2 modules only support 4-Gbps SFPs.
This section provides the following topics:
•Cisco Fibre Channel SFP Transceivers
•Cisco Fibre Channel/Gigabit Ethernet Transceivers
•Cisco CWDM SFP Transceivers
•Cisco Gigabit Ethernet Transceivers
•DWDM Fibre Channel SFP Transceivers
Cisco Fibre Channel SFP Transceivers
Table B-16 lists the Cisco 2-Gbps and 4-Gbps Fibre Channel SFP transceivers.
Table B-16 Cisco 2-Gbps and 4-Gbps Fibre Channel SFP Transceivers
Transceiver Module
Product Number
|
Description
|
Type
|
DS-SFP-FC4G-SW
|
1/2/4-Gbps Fibre Channel SW, SFP, LC
|
Short wavelength
|
DS-SFP-FC4G-MR
|
1/2/4-Gbps Fibre Channel LW 4-km, SFP, LC
|
Long wavelength
|
DS-SFP-FC4G-LW
|
1/2/4-Gbps Fibre Channel LW 10-km, SFP, LC
|
Long wavelength
|
DS-SFP-FC-2G-SW
|
1/2-Gbps Fibre Channel SW, SFP, LC
|
Short wavelength
|
DS-SFP-FC-2G-LW
|
1/2-Gbps Fibre Channel LW, SFP, LC
|
Long wavelength
|
General Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
Table B-17 provides the general specifications for Cisco Fibre Channel SFP transceivers.
Table B-17 General Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
|
Wavelength
(nanometer)
|
Fibre Type
|
Core Size
(micon)
|
Baud Rate
(GBd)
|
Cable Distance
(meter)
|
DS-SFP-FC4G-SW
|
850
|
MMF
|
62.5
|
1.0625
|
300 m (984 ft)
|
| |
|
62.5
|
2.125
|
150 m (492 ft)
|
62.5
|
4.250
|
70 m (230 ft)
|
50.0 (OM2)
|
1.0625
|
500 m (1640 ft)
|
50.0 (OM2)
|
2.125
|
300 m (984 ft)
|
50.0(OM2)
|
4.250
|
150 m (492 ft)
|
50. 0 (OM3)
|
1.0625
|
860 m (2821 ft)
|
50. 0 (OM3)
|
2.125
|
500 m (1640 ft)
|
50. 0 (OM3)
|
4.250
|
380 m (1246 ft)
|
DS-SFP-FC4G-MR
|
1310
|
SMF
|
9.0
|
1.0625
|
6.2 miles (10 km)
|
9.0
|
2.125
|
2.4 miles (4 km)
|
9.0
|
4.250
|
2.4 miles (4 km)
|
DS-SFP-FC4G-LW
|
1310
|
SMF
|
9.0
|
1.0625
|
6.2 miles (10 km)
|
9.0
|
2.125
|
6.2 miles (10 km)
|
9.0
|
4.250
|
2.4 miles (4 km)
|
Note The minimum cable distance for all the transceivers, such as MMF and SMF, is 2 meters (6.5 feet).
Environmental and Power Requirement for Cisco 4-Gbps Fibre Channel SFP Transceivers
Table B-18 provides the power specification for the Cisco 4-Gbps Fibre Channel SFP transceivers.
Table B-18 Power Requirement Specification for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
|
Average Transmit
Power (dBm)
|
Average Receive
Power (dBm)
|
Fiber Loss Budget (dBm)
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
|
DS-SFP-FC4G-SW
|
-1.2
|
-9
|
0
|
-
|
1.78 (62.5 micron), 2.06 (50 micron - OM2), 4.48 (50 micron - OM3)
|
DS-SFP-FC4G-MR
|
-3
|
-11.2
|
-1
|
-
|
4.8
|
DS-SFP-FC4G-LW
|
-3
|
-8.4
|
-1.0
|
-
|
7.8
|
Table B-19 provides the environment specification for the Cisco 4-Gbps Fibre Channel SFP transceivers.
Table B-19 Environmental Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
|
Operating
|
Storage
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
DS-SFP-FC4G-SW
|
40°C
|
0°C
|
85°C
|
-40°C
|
DS-SFP-FC4G-MR
|
40°C
|
0°C
|
85°C
|
-40°C
|
DS-SFP-FC4G-LW
|
40°C
|
0°C
|
85°C
|
-40°C
|
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
General Specifications for Cisco 2-Gbps Fibre Channel SFP Transceivers
Table B-20 provides general specification for the 4-Gbps Fibre Channel SFP transceiver.
Table B-20 General Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
|
Wavelength
(nanometer)
|
Fibre Type
|
Core Size
(micon)
|
Baud Rate
(GBd)
|
Cable Distance
(meter)
|
DS-SFP-FC-2G-SW
|
850
|
MMF
|
62.5
|
1.0625
|
300 m (984 ft)
|
62.5
|
2.125
|
150 m (492 ft)
|
50.0 (OM2)
|
1.0625
|
500 m (1640 ft)
|
50.0 (OM)
|
2.125
|
300 m (984 ft)
|
DS-SFP-FC-2G-LW
|
1310
|
SMF
|
9.0
|
1.0625
|
6.2 miles (10 km)
|
9.0
|
2.125
|
6.2 miles (10 km)
|
Note The minimum cable distance for both the transceivers such as MMF and SMF is 2 meters (6.5 feet).
Environmental and Power Requirement for Cisco 2-Gbps Fibre Channel SFP Transceivers
Table B-21 provides the power specification for Cisco 2-Gbps Fibre Channel SFP transceivers.
Table B-21 Power Requirement Specification for Cisco 2-Gbps Fibre Channel SFP Transceivers
SFP
|
Average Transmit
Power (dBm)
|
Average Receive
Power (dBm)
|
Fiber Loss Budget (dBm)
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
|
DS-SFP-FC-2G-SW
|
-1.2
|
-10.0
|
0
|
-
|
2.1 (62.5 micron), 2.62 (50 micron -OM2)
|
DS-SFP-FC-2G-LW
|
-3
|
-11.7
|
-3
|
-
|
7.8
|
Table B-22 provides the environmental specification for Cisco 2-Gbps Fibre Channel SFP transceivers.
Table B-22 Environmental Specifications for Cisco 2-Gbps Fibre Channel SFP Transceivers
SFP
|
Operating
|
Storage
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
DS-SFP-FC-2G-SW
|
40°C
|
0°C
|
85°C
|
-40°C
|
DS-SFP-FC-2G-LW
|
40°C
|
0°C
|
85°C
|
-40°C
|
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers
Table B-23 provides the maximum environmental and electrical ratings for Cisco Fibre Channel SFP transceivers.
Table B-23 Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers
|
|
Symbol
|
Min.
|
|
Unit
|
Notes
|
Storage temperature
|
TS
|
-40
|
85
|
°C
|
1
|
Case temperature
|
TC
|
0
|
70
|
°C
|
1, 2
|
Relative humidity
|
RH
|
5
|
95
|
%
|
1
|
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
Cisco Fibre Channel/Gigabit Ethernet Transceivers
Table B-24 lists the combination Fibre Channel/Gigabit Ethernet SFP transceivers.
Table B-24 Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
Transceiver Module Product Number
|
Description
|
Type
|
DS-SFP-FCGE-LW
|
1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-LW SFP, LC
|
Long wavelength
|
DS-SFP-FCGE-SW
|
1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-SW SFP, LC
|
Short wavelength
|
General Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
Table B-25 provides general specification for Cisco Fibre Channel/Gigabit Ethernet SFP transceiver.
Table B-25 General Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
SFP
|
Wavelength
(nanometer)
|
Fibre Type
|
Core Size
(micon)
|
Baud Rate
(GBd)
|
Cable Distance
(meter)
|
DS-SFP-FCGE-SW
|
850
|
MMF
|
62.5
|
1.0625
|
300 m (984 ft)
|
62.5
|
2.125
|
150 m (492 ft)
|
50.0 (OM2)
|
1.0625
|
500 m (1640 ft)
|
50.0 (OM2)
|
2.125
|
300 m (984 ft)
|
DS-SFP-FCGE-LW
|
1310
|
SMF
|
9.0
|
1.0625
|
6.2 miles (10 km)
|
9.0
|
2.125
|
6.2 miles (10 km)
|
Note The minimum cable distance for both the transceivers listed above (multi-mode fiber (MMF)) and single-mode fiber (SMF) is 2 meters (6.5 feet).
Environmental and Power Requirement Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
Table B-26 provides the power requirement specification for Cisco Fibre Channel/Gigabit Ethernet SFP transceivers.
Table B-26 Power Requirement Specification for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
SFP
|
Average Transmit
Power (dBm)
|
Average Receive
Power (dBm)
|
Fiber Loss Budget (dBm)
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
|
DS-SFP-FCGE-SW
|
-1.2
|
-10.0 (FC)
-9.5 (GE)
|
0
|
-17 (GE)
|
2.1 (FC - 62.5 micron), 2.62 (FC - 50.0 micron)
2.38 (GE - 62.5 micron), 3.37 (FC - 50.0 micron)
|
DS-SFP-FCGE-LW
|
-3
|
-11.0
|
-3
|
-19 (GE)
|
7.8 (FC)
4.57 (GE)
|
Table B-27 provides the environmental specification for Cisco Fibre Channel/Gigabit Ethernet SFP transceivers.
Table B-27 Environmental Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
SFP
|
Operating
|
Storage
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
DS-SFP-FCGE-SW
|
40°C
|
0°C
|
85°C
|
-40°C
|
DS-SFP-FCGE-LW
|
40°C
|
0°C
|
85°C
|
-40°C
|
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
Cisco CWDM SFP Transceivers
Table B-28 lists the Cisco 1-Gbps and 2-Gbps CWDM SFP transceivers.
Table B-28 Cisco 1-Gbps and 2-Gbps CWDM SFP Transceivers
Description
|
Color
|
Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Gray
|
Cisco CWDM SFP 1490 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Violet
|
Cisco CWDM SFP 1510 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Blue
|
Cisco CWDM SFP 1530 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Green
|
Cisco CWDM SFP 1550 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Yellow
|
Cisco CWDM SFP 1570 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Orange
|
Cisco CWDM SFP 1590 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Red
|
Cisco CWDM SFP 1610 nm; Gigabit Ethernet and 1-Gbps/2-Gbps FC
|
Brown
|
Table B-29 lists the Cisco 4-Gbps CWDM SFP transceivers available through Cisco.
Table B-29 Cisco 4-Gbps CWDM SFP Transceivers
Description
|
Color
|
DS-CWDM4G1470: Cisco MDS9000 1470 nm; CWDM 4-Gbps FC
|
Gray
|
DS-CWDM4G1490: Cisco MDS9000 1490 nm; CWDM 4-Gbps FC
|
Violet
|
DS-CWDM4G1510: Cisco MDS9000 1510 nm; CWDM 4-Gbps FC
|
Blue
|
DS-CWDM4G1530: Cisco MDS9000 1530 nm; CWDM 4-Gbps FC
|
Green
|
DS-CWDM4G1550: Cisco MDS9000 1550 nm; CWDM 4-Gbps FC
|
Yellow
|
DS-CWDM4G1570: Cisco MDS9000 1570 nm; CWDM 4-Gbps FC
|
Orange
|
DS-CWDM4G1590: Cisco MDS9000 1590 nm; CWDM 4-Gbps FC
|
Red
|
DS-CWDM4G1610: Cisco MDS9000 1610 nm; CWDM 4-Gbps FC
|
Brown
|
Environmental and Optical Specifications for Cisco 2-Gbps CWDM SFP Transceivers
Table B-30 provides the environmental specifications for the Cisco 2-Gbps CWDM SFP transceivers.
Table B-30 Environmental Specifications for Cisco 2-Gbps CWDM SFP Transceivers
SFP
|
Operating
|
Storage
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
All Cisco 2-Gbps CWDM SFP Transceivers
|
40°C
|
0°C
|
85°C
|
-40°C
|
Table B-31 provides the optical specifications for the Cisco 2-Gbps CWDM SFP transceivers.
Table B-31 Optical Specification for Cisco 2-Gbps CWDM SFP Transceivers
Parameters
|
Symbol
|
Minimum
|
Typical
|
Maximum
|
Units
|
Notes/Conditions
|
Transmitter Center Wavelength
|
lc
|
x-4
|
-
|
x+7
|
nm
|
Available center wavelengths are 1470, 1490, 1510, 1530, 1550, 1570, 1590, and 1610 nm
|
Side-mode Suppression Ratio
|
SMSR
|
30
|
-
|
-
|
dB
|
-
|
Transmitter Optical Output Power
|
Pout
|
0.0
|
|
5.0
|
dBm
|
Average power coupled into single-mode fiber
|
Receiver Optical Input Power (BER <10-12 with PRBS 2-7-1)
|
Pin
|
-28.0
|
-
|
-7.0
|
dBm
|
At 2.12 Gbps, 140°F (60°C) case temperature
|
Receiver Optical Input Power (BER <10-12 with PRBS 2-7-1)
|
Pin
|
-29.0
|
-
|
-7.0
|
dBm
|
At 1.25 Gbps, 140°F (60°C) case temperature
|
Receiver Optical Input Wavelength
|
lin
|
1450
|
-
|
1620
|
nm
|
-
|
Transmitter Extinction Ratio
|
OMI
|
9
|
-
|
-
|
dB
|
-
|
Dispersion Penalty at 62.1 miles (100 km)
|
-
|
-
|
-
|
3
|
dB
|
At 2.12 Gbps
|
Dispersion Penalty at 62.1 miles (100 km)
|
-
|
-
|
-
|
2
|
dB
|
At 1.25 Gbps
|
Note•Parameters are specified over temperature and at end of life unless otherwise noted.
•When shorter distances of single-mode fiber are used, it is necessary to insert an in-line optical attenuator in the link to avoid overloading the receiver.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
Environmental and Optical Specifications for Cisco 4-Gbps CWDM SFP Transceivers
Table B-32 provides the environmental specifications for the Cisco 4-Gbps CWDM SFP transceivers.
Table B-32 Environmental Specifications for Cisco 4-Gbps CWDM SFP Transceivers
SFP
|
Operating
|
Storage
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
All Cisco 4-Gbps CWDM SFP Transceivers
|
40°C
|
0°C
|
85°C
|
-40°C
|
Table B-33 provides the optical specifications for Cisco 4-Gbps CWDM SFP transceivers.
Table B-33 Optical Specification for Cisco 4-Gbps CWDM SFP Transceivers
Parameters
|
Symbol
|
Minimum
|
Typical
|
Maximum
|
Units
|
Notes/Conditions
|
Transmitter Center Wavelength
|
lc
|
(x-6)
|
x
|
x+6
|
nm
|
Available center wavelengths are 1470, 1490, 1510, 1530, 1550, 1570, 1590, and 1610 nm
|
Side-mode Suppression Ratio
|
SMSR
|
30
|
-
|
-
|
dB
|
-
|
Transmitter Optical Output Power
|
Pout
|
1.0
|
-
|
5.0
|
dBm
|
Average power coupled into single-mode fiber
|
Receiver Optical Input Power (BER <10-12 with PRBS 2-23-1)
|
Pin
|
-15.7
|
-
|
0.0
|
dBm
|
140°F (60°C) case temperature
|
Link Budget
|
-
|
17.8
|
-
|
-
|
dB
|
-
|
Receiver Optical Input Wavelength
|
lin
|
1450
|
-
|
1620
|
nm
|
-
|
Transmitter Extinction Ratio
|
OMI
|
4
|
-
|
-
|
dB
|
-
|
Dispersion Penalty at 15.5 miles (25 km)
|
-
|
-
|
-
|
3
|
dB
|
-
|
Note•In typical point-to-point deployments, all wavelengths have a minimum reach of 24.8 miles (40 km).
•Parameters are specified over temperature and at end of life unless otherwise noted.
•When shorter distances of single-mode fiber are used, it is necessary to insert an in-line optical attenuator in the link to avoid overloading the receiver.
•A maximum of 24 4-Gbps CWDM SFPs are supported in a single MDS switching module.
•When interoperating a Cisco 4-Gbps CWDM SFP transceiver with a Cisco 1/2-Gbps CWDM transceiver, the speed of ports on the Cisco 4-Gbps CWDM SFP transceiver must be manually configured to 1-Gbps or 2-Gbps.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
Cisco Gigabit Ethernet Transceivers
Cisco Systems provides a 1-Gbps Gigabit Ethernet SFP transceiver used on the Cisco MDS 9000 IPS modules. Table B-34 lists the transceiver supported on the Cisco MDS 9216.
Table B-34 Cisco Gigabit Ethernet SFP Transceivers
Transceiver Module Product Number
|
Description
|
DS-SFP-GE-T
|
1-Gbps Ethernet SFP
|
Note DS-SFP-GE-T is not supported on Cisco MDS 9222.
General Specifications for Cisco Gigabit Ethernet Transceivers
Table B-35 provides the general specification for the Cisco Gigabit Ethernet SFP transceiver.
Table B-35 General Specification for the Cisco Gigabit Ethernet SFP Transceivers
SFP
|
Cable Type
|
Cable Distance
|
DS-SFP-GE-T
|
Category 5 UTP
|
100 m (328 ft)
|
Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet Transceivers
Table B-36 provides the environmental specifications for the Cisco Gigabit Ethernet transceivers.
Table B-36 Environmental Specifications for Cisco Gigabit Ethernet Transceivers
SFP
|
Operating
|
Storage
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
DS-SFP-GE-T
|
40°C
|
0°C
|
85°C
|
-40°C
|
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family.
DWDM Fibre Channel SFP Transceivers
Fibre Channel ports on the Cisco MDS 9222i support 2-Gbps DWDM SFP transceivers. Table B-37 lists the DWDM Fibre Channel transceivers supported on the Cisco MDS 9200 Series.
Note A maximum of eight 2-Gbps DWDM SFPs are supported in a single MDS switching module.
Table B-37 Supported DWDM Fibre Channel SFP Transceivers for Cisco MDS 9200 Series
Part Number
|
Product Name
|
DWDM-SFP-6061
|
Cisco 6061 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5979
|
Cisco 5979 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5898
|
Cisco 5898 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5817
|
Cisco 5817 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5655
|
Cisco 5655 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5575
|
Cisco 5575 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5494
|
Cisco 5494 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5413
|
Cisco 5413 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5252
|
Cisco 5252 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5172
|
Cisco 5172 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5092
|
Cisco 5092 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-5012
|
Cisco 5012 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4851
|
Cisco 4851 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4772
|
Cisco 4772 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4692
|
Cisco 4692 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4612
|
Cisco 4612 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4453
|
Cisco 4453 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4373
|
Cisco 4373 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4294
|
Cisco 4294 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4214
|
Cisco 4214 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-4056
|
Cisco 4056 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3977
|
Cisco 3977 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3898
|
Cisco 3898 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3819
|
Cisco 3819 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3661
|
Cisco 3661 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3582
|
Cisco 3502 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3504
|
Cisco 3504 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3425
|
Cisco 3425 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3268
|
Cisco 3268 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3190
|
Cisco 3190 nm; DWDM 1/2-Gbps Fibre Channel SFP
|
DWDM-SFP-3112
|
Cisco 3112 nm; DWDM 1/2-Gbps Fibre Channel SF
|
DWDM-SFP-3033
|
Cisco 3033 nm; DWDM 1/2-Gbps Fibre Channel SF
|
