Feedback
Table Of Contents
A - C - D - E - F - H - I - M - N - O - P - R - S - T - U -
Index
A
audience vii
C
Command Line Interface 3
commands
config ca-link-hoqlife 3
config db-sync cold-sync-limit 5
config db-sync cold-sync-period 6
config db-sync cold-sync-timeout 7
config db-sync disable 8
config db-sync enable 9
config db-sync max-backup-sms 10
config db-sync new-session-delay 11
config db-sync poll-interval 12
config db-sync resync-interval 13
config db-sync session-timeout 14
config lmc 15
config local-node-retries 17
config mad-retries 19
config master-poll-interval 21
config master-poll-retries 23
config max-active-sms 25
config max-hops 27
config multicast-group-ib-create 31
config multicast-group-ib delete 33
config multicast-group-ipoib create 34
config multicast-group-ipoib delete 36
config node-timeout 37
config partition key 39
config partition key ipoib 41
config partition member add 43
config partition member remove 44
config partition member type 45
config pm connection monitor 47
config pm monitored port 52
config pm monitor poll-interval 49
config pm monitor start-delay 50
config pm monitor state 51
config pm port counter access 53
config pm threshold 54
config priority 56
config response-timeout 58
config route-around chassis 60
config route-around node 61
config route-around port 62
config sa-mad-queue-depth 63
config sl-vl-mapping oper-vl add 65
config sl-vl-mapping oper-vl apply 67
config sl-vl-mapping oper-vl delete 68
config sm-key 69
config span 70
config sweep-interval 71
config switch-life-time 73
config sw-link-hoqlife 74
config trace 76
config vl-arbitration add 77
config vl-arbitration apply 79
config vl-arbitration delete 80
config wait-report-response 81
echo 2
exit 3
help 4
history 5
pm reset connection counters 2
pm reset counters 3
pm test connection 5
repeat 6
run 7
show config 3
show db-sync 4
show lft 6
show mft 7
show multicast 8
show neighbor 10
show node 12
show other-sm 13
show partition 14
show pm connection counters 16
show pm connection monitors 19
show pm cumulative counters 20
show pm cumulative error counters 22
show pm monitor config 24
show pm monitored ports 25
show pm port counter access 26
show pm port counters 27
show pm threshold 30
show port 31
show route 32
show route-around 34
show service 35
show sl-vl mapping 36
show sl-vl-mapping-config 37
show span 38
show subscription 39
show switch 40
show version 41
show vl-arbitration 42
show vl-arbitration-config 44
shutdown 11
compatibility 4
config lmc command 15
config mad-retries command 19
config master-poll-interval command 21
config master-poll-retries command 23
config max-active-sms command 25
config max-hops command 27
config multicast-group-ib create command 31
config multicast-group-ib delete command 33
config multicast-group-ipoib create command 34
config multicast-group-ipoib delete command 36
config node-timeout command 37
config partition key command 39
config partition member add command 43
config partition member remove command 44
config partition member type commands 45
config pm connection monitor command 47
config pm monitored port command 52
config pm monitor poll-interval command 49
config pm monitor start-delay command 50
config pm monitor state command 51
config pm port counter access command 53
config pm threshold command 54
config priority command 56
config response-timeout command 58
config sa-mad-queue-depth command 63
config sm-key command 69
config sweep-interval command 71
config switch-life-time command 73
config sw-link-hoqlife command 74
config trace command 76
configuration
restoring 12
saving 12
config wait-report-response command 81
connection monitor 47
conventions viii
counter access 53
counters, resetting 3
counters, resetting connection 2
D
documentation
additional publications ix
conventions viii
obtaining ix
organization vii
E
exit command 3
F
fabric 1
failover 2
features 2
fundamentals 1
H
history command 5
hops, maximum 27
I
installation procedure 4
installing 4
interoperability 3
M
MAD retries 19
master poll interval 21
master poll retries 23
monitored port 52
monitor poll-interval 49
monitor start-delay 50
monitor state 51
multicast
N
network 1
node timeout 37
O
organization vii
overview 1
P
p_key 39
partition key 39
partitions
adding members 43
changing type 45
removing members 44
performance monitoring 2
pm connection monitor 47
pm monitored port 52
pm monitor poll-interval 49
pm monitor start-delay 50
pm monitor state 51
pm port counter access 53
pm reset connection counters command 2
pm reset counters command 3
pm test connection command 5
pm threshold 54
poll interval 21
poll retries 23
preface vii
priority, Subnet Manager 56
R
requirements 4
reset counters 3
response timeout 58
restoring the configuration 12
run command 7
S
saving the configuration 12
scalability 3
show config command 3
show db-sync command 4
show lft command 6
show mft command 7
show multicast command 8
show neighbor command 10
show node command 12
show other-sm command 13
show partition command 14
show pm connection counters command 16
show pm connection monitors command 19
show pm cumulative counters command 20
show pm cumulative error counters command 22
show pm monitor config command 24
show pm monitored ports command 25
show pm port counter access command 26
show pm port counters command 27
show pm threshold command 30
show port command 31
show route command 32
show service command 35
show subscription command 39
show switch command 40
show version command 41
shutdown command 11
sm key 69
subnet 1
Subnet Manager
compatibility 4
installing 4
interoperability 3
key 69
maximum number of 25
priority 56
requirements 4
saving and restoring the configuration 12
scalability 3
speed 3
using 6
why a high-performance SM? 2
support
obtaining ix
sweep interval 71
T
threshold 54
timeout
node 37
response 58
trace 76
U
using 6