Table Of Contents

System Specifications

System Specifications

---

Table B-1 Physical Specifications and Power Requirements

Description	Specifications
Dominions (H x W x D)	3.5 in. x 17.5 in. x 18.25 in. (8.89 cm x 44.45 cm x 46.36 cm)
Weight	~ 32 lb (14.5 kg)
Heat dissipation	370W (1262 Btu1 )
Input voltage, AC power supply Current Frequency Power factor Input AC power	100 to 240 VAC 5 to 2.5A2 50/60 Hz 0.80 to 0.95 525W3 (maximum)
AC-input cable(s)	18-AWG4 3-wire cable, with a 3-lead IEC-320 receptacle on the power supply end, and a country-dependent plug on the power source end
Airflow	~120 cfm5
Temperature	32 to 104°F (0 to 40°C) operating; -4 to 149°F (-20 to 65°C) nonoperating
Humidity	10 to 90% noncondensing
LAN interfaces	2 Ethernet 10BaseT/100BaseTX autosensing (RJ-45)
Console and auxiliary ports	Asynchronous serial (RJ-45)
WAN interface options	T1/E1, T3, E3, ATM T3, ATM E3, and ATM OC-3c/STM1 single-mode intermediate reach and multimode
Recommended minimum software requirements	Cisco IOS Release 12.0(4)XE or later releases of 12.0 XE Cisco IOS Release 12.0(6)T or later releases of 12.0 T
Compliance	CE Marking, FCC Part 68
Safety	UL 1950, CSA 22.2 No. 950, EN60950, AUSTEL TS001, AS/NZS 3260, IEC 950
EMC6	FCC Class A (47 CFR, Part 15), ICES-003 Class A, EN55022 Class B, CISPR22 Class B, AS/NZS 3548 Class B, and VCCI Class B

1 Btu = British thermal units. 2 A = amperes. 3 W = watts. 4 AWG = American Wire Gauge. 5 cfm = cubic feet per minute. 6 EMC = electromagnetic compliance.