CiscoWorks Management Center for IPS Sensors

Table Of Contents

Supported Devices and Software Versions for Management Center for IPS Sensors 2.2

Supported Devices and Software Versions for Management Center for IPS Sensors 2.2

---

Revised: November 22, 2005

Table 1 shows the devices supported by Management Center for IPS Sensors 2.2.

You can find information about new device support at http://www.cisco.com.

To see a list of packages installed on your CiscoWorks server, select Server Configuration > About the Server > Applications and Versions. Then, click the application name in the Applications Installed table.

Table 1 Supported Devices

Type of Device	Devices Supported	Software
Cisco Network IPS Sensor Appliances	IDS-4210	IDS 4.0, IDS 4.1, IPS 5.0, and IPS 5.1
	IDS-4215	IDS 4.1, IPS 5.0, and IPS 5.1
	IDS-4220	IDS 4.0 and IDS 4.1
	IDS-4230	IDS 4.0 and IDS 4.1
	IDS-4235	IDS 4.0, IDS 4.1, IPS 5.0, and IPS 5.1
	IDS-4240	IDS 4.1, IPS 5.0, and IPS 5.1
	IDS-4250-TX and IDS-4250-SX	IDS 4.0, IDS 4.1, IPS 5.0, and IPS 5.1
	IDS-4250-XL	IDS 4.0, IDS 4.1, IPS 5.0, and IPS 5.1
	IDS-4255	IDS 4.1, IPS 5.0, and IPS 5.1
Cisco Adaptive Security Appliances (ASA)	5510	IPS 5.0 and IPS 5.1
	5520	IPS 5.0 and IPS 5.1
	5540	IPS 5.0 and IPS 5.1
Cisco Switch IDS Sensor Modules	IDSM2	IDS 4.0, IDS 4.1, IPS 5.0, and IPS 5.1
Cisco IOS Routers (Cisco IOS IPS Devices)	IPS enabled image required	•IOS 12.3(14)T, 12.4(2)T, and 12.4(4)T •IOS 12.4.1 and 12.4.3
Cisco Integrated Services Routers (ISRs)	Cisco 800, 1800, 2800, 3800, 72xx, and 7301 series routers	•IOS 12.3(14)T, 12.4(2)T, and 12.4(4)T •IOS 12.4.1 and 12.4.3
Cisco IDS Network Module (NM-CIDS)	NM-CIDS in the following routers: •Cisco 2600 XM series, 2691 •Cisco 2811, 2821, and 2851 •Cisco 3660 •Cisco 3725, 3745 •Cisco 3825, 3845	IDS 4.1, IPS 5.0, and IPS 5.1