Installing the VPN/Security Management Solution (VMS) 2.3 on Solaris
Overview

Table Of Contents

VPN/Security Management Solution Overview

What's New in VMS 2.3?

VMS Components

System Requirements

Supported Devices

Licensing Requirements


VPN/Security Management Solution Overview


This chapter includes the following overview information:

What's New in VMS 2.3?

VMS Components

System Requirements

Supported Devices

Licensing Requirements

CiscoWorks VPN/Security Management Solution (VMS) is an integral part of the SAFE Blueprint from Cisco and is its flagship integrated security management solution. VMS combines web-based tools for configuring, monitoring, and troubleshooting including:

Enterprise Virtual Private Networks (VPNs)

Firewalls

Network Intrusion Prevention Systems (IPSs)

Host-based Intrusion Prevention Systems (IPSs)

Router-based IPSs

VMS addresses the needs of both small- and large-scale VPN and security deployments by helping to protect productivity gains and reduce operating costs. Unlike point security products from multiple vendors that can leave vulnerable gaps, VMS provides a comprehensive solution that ties separate security and VPN technologies into a single secure network.

What's New in VMS 2.3?

The management functions for firewalls, Network IPS, VPNs, security monitoring, and performance monitoring have been updated with new features or usability improvements. Management Center for IDS Sensors is called Management Center for IPS Sensors for its increased IPS focus. The installation of VMS is faster and more streamlined. Management support for router-based IPS signatures has been added to extend security to the network infrastructure.

VMS Components

Table 1-1 describes VMS 2.3 components and the capabilities of each.

VMS is packaged in one sub-box with Obtaining Documentation directing you to VMS documentation and the following four CDs:

VMS Common Services with Service Pack 3 (Disk 1)—Contains these VMS components and associated product documentation:

CiscoWorks Common Services

CiscoWorks Common Services Service Pack 3


Note CiscoWorks Common Services Service Pack 3 is a VMS update embedded with the installation of Common Services. It does not require a separate installation, but even if you have Common Services 2.2 on your server from and older version of VMS, you must upgrade to this version of Common Services.


VMS Configuration Centers for Solaris (Disk 2)—Contains these VMS components and associated product documentation:

Auto Update Server

Management Center for Firewalls

Management Center for IPS Sensors (Formerly Management Center for IPS Sensors.)

Management Center for VPN Routers

VMS Monitoring Centers for Solaris (Disk 3)—Contains these VMS components and associated product documentation:

Monitoring Center for Performance

Monitoring Center for Security

VMS Resource Manager Essentials for Solaris (Disk 4)—Contains these VMS components and associated product documentation:

Resource Manager Essentials

VMS Resource Manager Essentials IDU 12

Management Center for IDS Sensors 2.0.1 (For upgrade customers only.)

Monitoring Center for Security 2.0.1 (for upgrade only.)


Note You must install IDU 12 included on Disk 2 for RME to work with VMS 2.3 even if you already have RME 3.5 installed on your server.


Table 1-1 VMS Components and Capabilities 

This Component...
Enables you to....

CiscoWorks Common Services 2.2 (Common Services) with Service Pack 3 (embedded)

Provide the following common software and services for VMS components:

Common Services Service Pack 3—Embedded update with the most recent security updates and bug fixes.

Common Services 2.2—A set of shared application services.

CiscoView 5.5—A graphical device management tool.

Integration Utility 1.5—An integration module that supports third-party Network Management Systems (NMS).

Auto Update Server 1.3 (AUS)

Upgrade device configuration files and software images on firewalls that use the auto update feature.

Management Center for Firewalls 1.3.4 (Firewall MC)

Configure PIX Firewalls and Cisco Catalyst Firewall Services Modules (FWSM).

Management Center for VPN Routers 1.3.1 (Router MC)

Configure and manage large-scale deployments of VPNs on Cisco VPN routers and Catalyst 6000 VPN Service Modules.

Management Center for IPS Sensors 2.1 (IPS MC)

Configure and manage network-based IPS Sensors, Cisco Catalyst 6000 Intrusion Detection System Modules (IPSMs), IPS network modules for Cisco routers (NM-CIDS), and Cisco IOS Intrusion Prevention System (IPS) devices.

Monitoring Center for Performance 2.0.2 (MCP)

Monitor and troubleshoot the health and performance of enterprise network security services.

Monitoring Center for Security 2.1 (Security Monitor)

Monitor and manage intrusion alarms and events from network-based IPS, host-based IPS, Cisco IOS IPS, FWSM and PIX Firewall devices.

Resource Manager Essentials 3.5 (RME)

Manage network inventory and device changes, network configuration, and software image updates.


System Requirements

This section contains:

VMS Server Requirements in Table 1-2

VMS Client Requirements in Table 1-3

Table 1-2 VMS Server Requirements

Component
Minimum Requirement

Hardware

Sun UltraSPARC 60 MP with 440 MHz or faster processor

or

Sun UltraSPARC III or IIIi (Sun Blade 2000 Workstation)

Sun Fire 280R Workgroup Server

Color monitor with video card capable of 16-bit colors

CD-ROM drive

100BaseT or faster connection

Operating System

Sun Solaris 2.8 with these patches:

112438

111626-01

111327-02

110945-02

110934-01

110898-02

110700-01

 

109326-05

108827-30

108652-51

108528-18

108921-14

108940-24

110951-01

110662-02

110615-01

110286-02

109324-02

111085-02

108964-06

Memory

1 Gigabyte, minimum

Virtual Memory

2 Gigabytes, minimum

Hard Drive Space

9 Gigabytes of free hard drive space, minimum


Note The actual amount of hard drive space required depends upon the number of CiscoWorks Common Services client applications you are installing and the number of devices you are managing with the client applications.



Table 1-3 VMS Client Requirements 

Component
Minimum Requirement

Hardware/Software

IBM PC-compatible computer with 300 MHz or faster Pentium processor running one of the following:

Windows 2000 Server, or Professional Edition with Service Pack 4

Windows XP Professional with Service Pack 1
and/or Service Pack 2

Hard Drive Space

400 MB virtual memory (for Windows)

Memory

256 MB minimum

Browser

You must also install one of the following HTML browsers:

Microsoft Internet Explorer 6, Service Pack 1

Netscape Navigator 7.1

Java Run-time Environment (JRE)

Sun JRE 1.4.1_02

Note If you are working with multiple versions of JRE see the CiscoWorks VPN/Security Management Solution Deployment Guide on cisco. com at: http://www.cisco.com/en/US/products/sw/cscowork/ps2330/prod_white_papers_list.html.


Supported Devices

Supported device tables for each VMS component are available online and are updated each time a component is updated. Go to http://www.cisco.com/en/US/products/sw/cscowork/ps2330/index.html and select Device Support Tables under the components for which you are seeking Device Support information.

Licensing Requirements

During VMS installation a 90-day unrestricted license is installed, enabling you to begin using VMS applications immediately. For uninterrupted use of VMS, you must apply for and install a production license immediately after installation.

You do not need to apply for a new production license during upgrade but you need to reload the license you received when you first installed and applied for a production license. Please seeUpgrading Common Services Production License


Caution To preserve data and avoid interrupted use of VMS, we recommend applying for the appropriate production license immediately after installation. See Obtaining and Installing a VMS Production License.