Table Of Contents

Hardware Specifications for the Cisco PAM Appliance

Hardware Specifications for the Cisco PAM Appliance

---

Table C-1 describes the specifications for the Cisco PAM appliance.

Table C-1 Environmental Specifications 

Dimensions	•1.7 in. high (4.3 cm) •17 in. wide (43.2 cm) •20 in. deep (50.8 cm)
Weight	15.0 lb (6.8 kg), base chassis
Temperature	•Non-operating—-40 ° to 70 °C / -40 ° to 158 °F •Operating—10 ° to 35 °C / 50 ° to 95 °F, with the maximum rate of change not to exceed 10 ° C / 50 °F per hour
Humidity	•Non-operating—-90% relative humidity, non-condensing at 35 °C / 95 °F.
Shock	•Operating—2.0 g, 11 msec, 1/2 sine •Packaged—Operational after an 24-inch free fall
Acoustic noise	7 Bels in sound power for a typical office ambient temperature (18-24 °C/65-75 °F). Your selection of peripherals may change the noise level.
Electrostatic discharge (ESD)	Tested to 15 kilovolts (kV); no component damage.
Maximum power consumption	350W (maximum output, power supply rating) 540W (maximum input, power supply rating)
Power input (low range)	90 to 127 (nominal) VAC; 47-63Hz
Power input (high range)	180 to 264 (nominal) VAC; 47-63Hz
CPU	Intel Core2 Duo 2.13-GHz processor with a 1066-MHz front side bus (FSB) and 2 MB of Level 2 cache
Memory	4 GB PC2-5300 DDR2 SDRAM ECC
Hard drive	250 GB SATA 7200 RPM
Ethernet	2 X 10/100/1000 RJ-45, 10BASE-T, 100BASE-TX, 1000BASE-T
Optical drive	1 DVD-ROM, front-accessible (8X DVD read, 24X CD read)
Serial ports	1
USB 2.0 ports	3 (1 at front and 2 at back of chassis)
Keyboard port	1 PS/2
Mouse port	1 PS/2