Table Of Contents
Cisco Content Security and Control Version 6.1(b1519-1) Patch Release Notes
This document contains release information for the Cisco Content Security and Control (CSC) Version 6.1(b1519-1) patch release. It includes the following sections:
About the CSC 6.1(b1519-1) Patch
The CSC Version 6.1(b1519-1) patch does not contain any new features. See the "Closed Caveats" section for information about the caveats that are resolved by this patch.
For information about the CSC 6.1(b1519) release, see the Cisco Content Security and Control Version 6.1 Release Notes.
Installing the CSC SSM 6.1(b1519-1) Patch
Install this patch only if you are running CSC SSM 6.1(b1519); your existing configuration and registration information will not be changed. If you are not sure what version of CSC SSM is installed on the device, see the "Verifying the Installed Version of the CSC SSM Software" section.
To upgrade your CSC SSM, follow these steps:
Step 1 Download the csc-p-6.1-b1519-1.pkg file from the Software Center on Cisco.com. You need to log into Cisco.com to download the software. If you do not have a Cisco.com account, visit the following website to become a registered user:
Step 2 Access the Trend Micro CSC SSM console:
a. Launch ASDM.
b. Choose Configuration > Trend Micro Content Security.
Step 3 Choose Administrator > Product Upgrade from the menu.
Step 4 Click Browse and select the .pkg file you downloaded.
Step 5 Click Install.
Step 6 Click Summary to confirm the installed software version.
Step 7 (Optional) Use an Eicar test file to confirm that the upgrade was successful and that the scanning services are configured correctly.
Verifying the Installed Version of the CSC SSM Software
You can confirm the version of the CSC SSM software, and software components and patches, from the ASA 5500 series adaptive security appliance command-line interface.
Note The software version is also displayed on the main page of the Trend Micro InterScan for Cisco CSC SSM interface.
To view the version of software installed on the CSC SSM module using the command line interface, perform the following steps:
Step 1 Use the session command to access the CSC SSM. Use cisco as the login name.hostname(config)# session 1Opening command session with slot 1.Connected to slot 1. Escape character sequence is 'CTRL-^X'.login: ciscoPassword:Trend Micro InterScan for Cisco CSC SSM Setup Main Menu---------------------------------------------------------------------1. Network Settings2. Date/Time Settings3. Product Information4. Service Status5. Change Password for Command Line Interface6. Restore Factory Default Settings7. Troubleshooting Tools8. Reset Management Port Access Control List9. Ping10. Exit ...
Step 2 Type 3 and press Enter to access the Product Information screen.
The Product Information screen displays the version and build number of each component of the CSC SSM. Installed patches appear below the component list.Enter a number from [1-10]: 3Product Information---------------------------------------------------------------------Main version 6.1 build 1519Mail component version 5.5 build 1118Web component version 2.1 build 1154Patches:p-6.1-b1519-1 07/10/2006 22:31:14 CSC SSM 6.1 Patch 1Press Enter to continue ...
Step 3 Press Enter.
The Trend Micro InterScan for Cisco CSC SSM Setup Main Menu appears.
This section describes the open and resolved caveats for the CSC 6.1 release. To see more information about an open or resolved caveat, use the Bug Toolkit on Cisco.com. If you are a registered Cisco.com user, view Bug Toolkit on cisco.com at the following website:
To become a registered Cisco.com user, go to the following website:
This section contains the following topics:
Table 1 lists the caveats that are open in Version 6.1(b1519-1)
Table 2 lists the caveats that were resolved in Version 6.1(b1519-1).
For additional information, see the ASDM online Help or the following documentation located on Cisco.com:
•Cisco Content Security and Control SSM Administrator Guide
•Cisco ASDM Release Notes
•Cisco ASA 5500 Series Hardware Installation Guide
•Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
•Cisco ASA 5500 Series Release Notes
•Cisco Security Appliance Command Line Configuration Guide
•Cisco Security Appliance Command Reference
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.