Table Of Contents

A - B - C - D - E - F - H - I - K - L - M - N - O - P - R - S - T - U - V - Y -

Index

A

action capabilities-conflict command HC-69

action discovery-timeout command HC-69

action uni-directional link-fault command HC-70

aggregate none command HC-131

ais-shut command HC-408

aps group command HC-340, HC-406

aps submode

channel command HC-340, HC-406

interface loopback command HC-406

See aps group command

B

bert pattern command HC-448, HC-450

buckets archive command HC-131

bundle command HC-623

Bundle-Ether command HC-227

bundle id command HC-227

C

cablelength command HC-422, HC-428, HC-435, HC-436

channel command HC-340, HC-406

channel-group command HC-440, HC-581, HC-586, HC-622

Channelized SONET, configuring HC-327, HC-332, HC-372, HC-375, HC-672, HC-675, HC-696

CHAP

defined HC-488

enabling HC-607

password, configuring HC-612

ppp HC-523, HC-598

refusing HC-617

clock source command HC-422, HC-423

controller e1 command HC-450

controller mgmtmultilink command HC-622

crc command HC-487, HC-527

D

default settings

flow control

Management Ethernet HC-11

mac-address (Management Ethernet) HC-11

speed (Management Ethernet) HC-10

delay trigger command HC-402

duplex command HC-14

E

E1 controller

default configuration values HC-422, HC-423

frame type HC-423, HC-443

E3 controller

cable length, setting HC-422

clock source, default value HC-422

configuring

clear channel HC-425

clear channel serial HC-426

national reserved bits HC-423

E3 configuration mode HC-426

frame type HC-422, HC-429

encap command (Frame Relay) HC-567, HC-575

encapsulation command HC-487, HC-527

encapsulation frame relay command HC-567

encapsulation frame-relay command HC-566

Ethernet interface

configuring

MAC accounting HC-25, HC-45

MAC address HC-25

configuring flow control HC-25

configuring MAC accounting HC-25

configuring the IP address and subnet mask HC-42

configuring the MAC address HC-25, HC-43

configuring the MTU HC-25, HC-43

default settings

flow control HC-25

MAC accounting HC-25

MAC address HC-25

mtu HC-25

displaying

Ethernet interfaces HC-44

MAC accounting statistics HC-46

displaying Ethernet interfaces HC-44

enabling flow-control HC-43

enabling Layer 2 transport mode HC-47

Gigabit Ethernet standards HC-27

IEEE 802.3ab 1000BASE-T Gigabit Ethernet HC-27

IEEE 802.3ae 10 Gbps Ethernet HC-28

IEEE 802.3 Physical Ethernet Infrastructure HC-27

IEEE 802.3z 1000 Mbps Gigabit Ethernet HC-27

Layer 2 VPN

overview HC-26

VLAN support HC-654

using the flow-control command HC-25, HC-43

using the ipv4 address command HC-42

using the l2transport command HC-47

using the mac-accounting command HC-25

using the mac address command HC-25, HC-43

using the mtu command HC-25, HC-43

using the negotiation auto command HC-43

using the no shutdown command HC-43

VLANs

802.1Q frames tagging HC-652

configuring a Layer 2 VPN attachment circuit HC-657

configuring subinterfaces HC-655

displaying VLAN interfaces HC-657, HC-661

MTU inheritance HC-653

native VLAN description HC-653

overview HC-652

removing a subinterface HC-659

subinterface overview HC-653

using the show vlan interfaces command HC-657, HC-661

F

failover HC-227

Fast Ethernet interface

auto-negotiation HC-26

configuring

duplex operation HC-25

MAC accounting HC-25

MTU HC-25

default settings

auto-negotiation HC-26

duplex operation HC-25

interface speed HC-26

MAC accounting HC-25

mtu HC-25

fdl HC-423

fdl ansi HC-423

fdl command HC-423, HC-439

flow-control command HC-25, HC-43

Frame Relay

configuration examples HC-589

configuring

PVC encapsulation HC-575

support type HC-567, HC-575

default configuration, modifying HC-573, HC-574

default settings HC-567

LMI

configuring HC-567, HC-575

disabling HC-567, HC-576, HC-577

enabling HC-567

overview HC-567

polling HC-568, HC-569

overview HC-566

POS interfaces HC-485

prerequisites HC-566

PVCs HC-567

serial interfaces HC-525

frame-relay intf-type command HC-567, HC-575

frame-relay intf-type dce command HC-568

frame-relay intf-type dte command HC-568

frame-relay lmi command HC-567

frame-relay lmi disable command HC-577

frame-relay lmi-t391dte command HC-569

frame-relay lmi-type command HC-567, HC-575

framing command HC-422, HC-423

H

HDLC HC-487

I

IEEE 802.3ad standard HC-216

if preconfiguration submode, ipv4 address command HC-5

if submode

bundle id command HC-235

controller sonet command HC-408

duplex command HC-14

interface command HC-407

ipv4 address command HC-12, HC-309, HC-582

keepalive command HC-407, HC-625

no shutdown command HC-12

pos crc command HC-407

See interface preconfigure command

speed command HC-15

interface command

for Ethernet interfaces HC-658

for VLAN subinterfaces HC-656

forVLAN subinterfaces HC-658

loopback HC-309

null HC-310

interface loopback command HC-406

interface POS command HC-235

interface preconfigure command HC-5

interfaces

Link Bundling HC-211

configuring HC-229

link failover HC-228

prerequisites HC-213

invert command HC-535

ipv4 address command HC-5, HC-42, HC-227, HC-656

Fast Ethernet HC-12

loopback HC-309

K

keepalive command HC-487, HC-502

keepalive timer

description HC-488

monitoring

POS link state HC-488

L

l2transport command HC-47

L2VPN

See Layer 2 VPN HC-26

See Layer 2 VPN HC-26

Layer 2 VPN

enabling Layer 2 transport mode HC-47

overview HC-26

using the l2transport command HC-47

LCP (Link Control Protocol) HC-487, HC-522

Link Aggregation Control Protocol HC-214, HC-216

link failover HC-228

LMI HC-567, HC-576, HC-577

lmi-n391dte command HC-569

lmi-n392dce command HC-568

lmi-n392dte command HC-569

lmi-n393dce command HC-568

lmi-n393dte command HC-569

lmi-t392dce command HC-568

Local Management Interface (LMI) HC-526

loopback

naming convention HC-305

loopback, naming convention HC-305

loopback command HC-402

M

mac accounting command HC-45

mac-accounting command HC-25

mac address command HC-25, HC-43

management ethernet interface, configuring HC-10

mdl string command HC-435, HC-436

mdl transmit command HC-423, HC-435, HC-436

mip auto-create command HC-74

mode command HC-426

MS-CHAP authentication

disabling HC-618

enabling HC-607, HC-608

password, configuring HC-614

ppp HC-488, HC-598, HC-614, HC-619

viewing HC-609

mtu command HC-25, HC-43, HC-487, HC-527

Multi-Chassis Link Aggregation

Access Network Redundancy Model HC-219

Core Network Redundancy Model HC-220

multilink command HC-627

multilink fragment delay command HC-624

multilink fragment-size command HC-624

multilink Frame Relay bundle interface HC-582

multilink interleave command HC-627

Multiprotocol Label Switching control processor (MPLSCP) HC-488, HC-523

N

naming conventions

loopback HC-305

null interface HC-305

preconfigure HC-3

national bits command HC-423, HC-429, HC-443

negotiation auto command HC-26, HC-43

Network Control Protocols (NCPs) HC-488, HC-522

no interface command HC-660

Nonstop forwarding HC-227

no shutdown command

(warning) HC-3

Fast Ethernet HC-12

for Ethernet interfaces HC-43

null interface

configuring HC-306

displaying HC-307

naming convention HC-305

O

overhead command HC-402

P

PAP authentication

defined HC-598

disabling HC-615

enabling HC-607, HC-608, HC-610, HC-611

ppp HC-488, HC-610

refusing HC-616

viewing HC-609

path command HC-403, HC-410

path scrambling command HC-408

ping ethernet cfm command HC-129

Point-to-Point protocol

See PPP

POS (Packet-over-SONET)

See POS interface

pos crc command HC-334

POS interface

bringing up HC-491

configuring

CRC value HC-334, HC-487, HC-495

encapsulation type HC-487

interface encapsulation HC-334, HC-495, HC-625

keepalive timer HC-487, HC-501, HC-502, HC-625

MTU HC-334, HC-487, HC-495, HC-509

optional parameters HC-494

PPP authentication HC-488

default settings

CRC HC-487

encapsulation HC-487

keepalive HC-487

mtu HC-487

Frame Relay encapsulation HC-485

HDLC encapsulation

description

overview HC-487

interface configuration mode

interface command HC-625

interface multilink command HC-624, HC-627

interface pos command HC-334, HC-492, HC-495

PPP encapsulation

description HC-485

overview HC-487

subinterfaces, creating with PVCs HC-496

PPP

CHAP

authentication HC-598

enabling HC-607, HC-608

password, configuring HC-612, HC-613

refusing HC-617

viewing HC-609

default configuration, modfying HC-604, HC-605

interfaces, displaying HC-607

MS-CHAP

disabling HC-618, HC-619

enabling HC-608

authenticaion     1

password, configuring HC-614

ppp HC-523, HC-598

viewing HC-609

overview HC-597

PAP

authentication HC-523, HC-610

disabling HC-615

enabling HC-607, HC-608, HC-610, HC-611

refusing HC-616

viewing HC-609

POS configuration example HC-637

POS interface HC-485, HC-487

prerequisites HC-596

serial configuration example HC-637

serial interface HC-519, HC-522

ppp authentication command HC-488, HC-523, HC-597, HC-608

ppp chap password command HC-613

ppp chap refuse command HC-617

ppp max-bad-auth command HC-605

ppp max-configure command HC-606

ppp max-failure command HC-606

ppp max-terminate command HC-606

ppp ms-chap password command HC-614

ppp ms-chap refuse command HC-619

ppp multilink minimum-active links command HC-627

ppp pap refuse command HC-616

ppp pap sent-username command HC-610, HC-611

ppp timeout authentication command HC-606

ppp timeout retry command HC-606

preconfiguration

advantages HC-3

directory HC-1

naming conventions HC-3

restriction to physical interface HC-1

PVC

POS subinterface HC-496, HC-498

R

RP, preconfiguration directory HC-1

S

scramble command HC-535

serial interface

configuring

CRC HC-535

interface encapsulation HC-535

IP address and subnet mask HC-532

keepalive timer HC-544

transmit delay HC-535

data stream, inverting HC-535

default settings

CRC HC-527

encapsulation HC-527

keepalive HC-527

mtu HC-527

link state HC-522, HC-523, HC-524

payload scrambling, enabling HC-535

PPP encapsulation HC-522

prerequisites HC-517

show aps command HC-341, HC-409

show bundle Bundle-POS command HC-236

show controllers command HC-427

show controller sonet command HC-404

show frame-relay lmi command HC-568

show interfaces command HC-42, HC-559

for Ethernet interfaces HC-44, HC-48

show mac accounting command HC-46

show ppp interfaces command HC-607, HC-609

show version command HC-42

show vlan command HC-657, HC-661

SLARP (Serial Line Address Resolution Protocol) HC-489, HC-522, HC-525

SONET (Synchronous Optical Network)

APS HC-404

description HC-397

fast reroute (FFR) HC-409

SONET APS (SONET Automatic Protection Switching) HC-404

SONET controller

configuring HC-401

frame type HC-402

sonet submode

ais-shut command HC-408

clock source command HC-402, HC-408

delay trigger command HC-402, HC-410

framing command HC-402

loopback command HC-402

overhead command HC-402

path command HC-403, HC-410

path scrambling command HC-408

See controller sonet command

SPAN HR-277

speed command HC-26

management ethernet HC-15

switched port analyzer HR-277

T

T1 controller

ANSI T1.403 or AT&T TR54016 performance reports HC-423, HC-439

BERT, configuring HC-450

clock source HC-423, HC-439

default configuration values HC-422, HC-423

DS0 timeslots, associating HC-440, HC-581, HC-586, HC-622

frame type HC-423, HC-439

T1 channel group, creating HC-440, HC-581, HC-586, HC-622

T1 configuration mode HC-439, HC-453, HC-580, HC-586, HC-622

yellow alarms HC-423

T3 controller

cable length, setting HC-422

clock source

configuring HC-428, HC-435, HC-436, HC-621

default value HC-422

configuring HC-430

BERT HC-447

channelized T3 controller HC-432

clear channel E3 controller HC-426

clear channel T3 controller HC-430

FRF.12 end-to-end fragmentation HC-585

MDL messages HC-423

multilink Frame Relay bundle interfaces HC-580

frame type HC-422, HC-435, HC-436

modifying

default E3 controller HC-428

default T3 controller HC-434

timeslots command HC-440, HC-581, HC-586, HC-622

traffic filtering HC-306

transmit-delay command HC-535

transparent switch over HC-10

U

uni-directional link-fault detection command HC-70

V

virtual interface

active/standby RPs HC-307

and active/standby RPs HC-4, HC-307

failover HC-305

naming convention HC-305

null interface definition HC-306

switchover HC-305

VLANs

802.1Q frames tagging HC-652

configuring an IP address and subnet mask HC-656

configuring subinterfaces HC-655

displaying VLAN interfaces HC-657, HC-661

Layer 2 VPN

configuring an attachment circuit HC-657

Layer 2 VPN support HC-654

MTU inheritance HC-653

native VLAN description HC-653

overview HC-652

removing a VLAN subinterface HC-659

subinterface overview HC-653

using the ipv4 address command HC-656

using the no interfawn command HC-660

using the show vlan interfaces command HC-657, HC-661

Y

yellow command HC-423, HC-439