Table Of Contents
Preface
Document Revision History
Document Objectives
Audience
Document Organization
Safety Warnings and Cautions
Warning Definition
Related Documentation
Obtaining Documentation and Submitting a Service Request
Preface
This preface discusses the objectives, audience, and organization of the Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide. The following sections are in this preface:
•
Document Revision History
•Document Objectives
•Audience
•Document Organization
•Safety Warnings and Cautions
•Related Documentation
•Obtaining Documentation and Submitting a Service Request
Document Revision History
The Document Revision History table below records technical changes to this document.
Document Version
|
Date
|
Change Summary
|
OL-13208-04 (RLS3)
|
February 2009
|
Added Cisco ASR1000-RP2 support, information about how alarms work with the power supply DB-25 connector, safety information, and update the chapter on field replaceable units (FRUs).
|
OL-13208-03 (RLS2)
|
November 2008
|
Improved the two-minute window allotted time to replace a power supply. You now have up to a maximum of five minutes to replace the power supply.
|
OL-13208-02 (RLS2)
|
October 2008
|
Added Cisco ASR1000-ESP20 and Cisco ASR1000-ESP10-N support. Updated eUSB device graphics and replacement information.
|
OL-13208-01
|
May 2008
|
This is the first version of this document for the Cisco ASR 1000 Series Routers (Cisco ASR1006 Router, Cisco ASR1004 Router, Cisco ASR1002 Router).
|
Document Objectives
This publication describes the installation of the Cisco ASR 1000 Series Aggregation Services Routers, replacement or upgrading of field-replaceable units (FRUs), and troubleshooting of the Cisco ASR 1000 Series Routers hardware. The purpose of this guide is to enable the safe and efficient installation of the Cisco ASR 1000 Series Aggregation Services Routers.
Audience
This publication is primarily designed for the person responsible for installing, maintaining, and troubleshooting the Cisco ASR 1000 Series Aggregation Services Routers. The users of this guide should:
•Be familiar with electronic circuitry and wiring practices.
•Have experience as electronic or electromechanical technicians.
•Have experience in installing high-end networking equipment. Certain procedures described in this guide require a certified electrician.
Document Organization
The major sections of this installation and configuration guide are:
Chapter and Appendix Number and Title
|
Description
|
Preface
|
The preface provides objectives, audience and organization of this manual.
|
Chapter 1 Cisco ASR 1000 Series Routers Hardware Overview
|
This chapter provides an overview of the Cisco ASR 1000 Series Aggregation Services Routers.
|
Chapter 2 Cisco ASR 1000 Series Router Components
|
This chapter describes the components for each Cisco ASR 1000 Series Aggregation Services Router.
|
Chapter 3 Preparing Your Site for Installation
|
This chapter provides site preparation guidelines for installing the ASR 1000 Series Routers.
|
Chapter 4 Cisco ASR 1006 Router
|
This chapter describes the Cisco ASR 1006 router and how to install it.
|
Chapter 5 Cisco ASR1004 Router
|
This chapter describes the Cisco ASR1004 router and how to install it.
|
Chapter 6 Cisco ASR1002 Router
|
This chapter describes the Cisco ASR1002 router and how to install it.
|
Chapter 7 Cisco ASR 1000 Series Router Power Up and Initial Configuration
|
This chapter provides basic system startup and initial configuration information.
|
Chapter 8 Replacing the Cisco ASR 1000 Series Routers Field-Replaceable Units
|
This chapter provides instructions for removing and replacing shared port adapters, ASR 1000 RP1 internal hard drive, AC and DC power supplies, the Cisco ASR1000-ESP forwarding processors, the Cisco DIMM memory cards, the Cisco memory stick, and the Cisco ASR 1000 Series Route Processors.
|
Appendix A Cisco ASR 1000 Series Routers Specifications
|
This appendix provides system specifications and pinouts.
|
Appendix B Cisco ASR 1000 Series Route Processor Signals and Pinouts
|
This appendix lists pinout specifications for the Cisco ASR1000-RP1 and the Cisco ASR1000-RP2.
|
Appendix C Troubleshooting Initial Startup Problems
|
This appendix provides basic system startup troubleshooting information.
|
Glossary
|
Listing of Cisco ASR 1000 Series Routers terms with definitions.
|
Index
|
Listing of terms for the Cisco ASR 1000 Series Routers
|
Safety Warnings and Cautions
Most safety warnings for the Cisco ASR 1000 Series Routers are placed in relevant sections throughout the document. For translated safety warnings, see the Regulatory Compliance and Safety Information for the Cisco 1000 Series Aggregation Services Routers. Below is Statement 1071, the Warning Definition statement, complete with translated warnings.
Warning Definition
|
Warning
|
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
|
Waarschuwing
|
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.
BEWAAR DEZE INSTRUCTIES
|
Varoitus
|
TÄRKEITÄ TURVALLISUUSOHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.
SÄILYTÄ NÄMÄ OHJEET
|
Attention
|
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
|
Warnung
|
WICHTIGE SICHERHEITSHINWEISE
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
BEWAHREN SIE DIESE HINWEISE GUT AUF.
|
Avvertenza
|
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.
CONSERVARE QUESTE ISTRUZIONI
|
Advarsel
|
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.
TA VARE PÅ DISSE INSTRUKSJONENE
|
Aviso
|
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.
GUARDE ESTAS INSTRUÇÕES
|
¡Advertencia!
|
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.
GUARDE ESTAS INSTRUCCIONES
|
Varning!
|
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.
SPARA DESSA ANVISNINGAR
|
|
|
|
|
|
|
|
|
|
|
Aviso
|
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.
GUARDE ESTAS INSTRUÇÕES
|
Advarsel
|
VIGTIGE SIKKERHEDSANVISNINGER
Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.
GEM DISSE ANVISNINGER
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Related Documentation
Your Cisco ASR1000 Series Routers and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:
•All documentation related to the Cisco ASR 1000 Series Routers is listed in the online Cisco ASR 1000 Series Aggregation Services Routers Documentation Roadmap. Information in this master index includes troubleshooting tools and documentation, regulatory compliance and safety information, and installation and replacement information. Also see the Cisco ASR 1000 Series Port Adapter Documentation Roadmap for specific shared port adapters supported on the Cisco ASR1000 Series routers and the Cisco ASR 1000 Series Routers Troubleshooting Roadmap.
Some of the Cisco ASR1000 Series Routers documentation that is listed on the Cisco ASR 1000 Series Aggregation Services Routers Documentation Roadmap includes:
–The Cisco ASR 1006, ASR1004, and ASR1002 Routers Quick Start Guide contain installation and configuration information. It contains quick reference information about chassis or parts installation.
–The Cisco ASR 1000 Series Aggregation Services Routers Troubleshooting document contains information to help you troubleshoot problems with the Cisco ASR1000 Series Routers.
–The Regulatory Compliance and Safety Information for Cisco ASR 1000 Series Aggregation Services Routers document provides international agency compliance, safety, and statutory information for wide-area network (WAN) interfaces for the Cisco ASR 1000 Series Routers.
–Cisco ASR 1000 Series shared port adapter documentation.
•Cisco IOS software documentation contains Cisco IOS software configuration information and support. See the modular configuration and modular command reference publications in the set that corresponds to the software release installed on your Cisco hardware.
•To check the minimum software requirements of Cisco IOS software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether modules within a system are compatible, but it does provide the minimum IOS requirements for individual hardware modules or components.
Note Access to this tool is limited to users with Cisco.com login accounts.
•Cisco Documentation DVD (See the "Obtaining Documentation and Submitting a Service Request" section.)
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
