Table Of Contents

HDLC Command

voice-encap

Syntax Description

Defaults

Command Mode

Command History

Usage Guidelines

Examples

HDLC Command

---

This chapter describes the following command used to configure voice traffic over HDLC on the Cisco MC3810.

•voice-encap

voice-encap

To define the data segmentation size on an HDLC interface to support voice over HDLC, use the voice-encap interface configuration command. Use the no form of this command to delete the setting.

voice-encap size
no voice-encap size

Syntax Description

size	The size of the data segmentation in bytes. The valid range is from 8 to 1600.

Defaults

No data segmentation size is defined.

Command Mode

Interface configuration

Command History

Release	Modification
11.3 MA	This command was first introduced.

Usage Guidelines

This command applies to Voice over HDLC on the Cisco MC3810.

Examples

The following example configures serial interface 1 to support a data segmentation size of 64 for Voice over HDLC:

interface serial 1

 voice-encap 64