Table Of Contents
Cisco 7600 Series Router Documentation
Other Cisco IOS Software Publications
Cisco IOS Release 12.2SR Software Publications
Obtaining Documentation and Submitting a Service Request
Preface
This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:
•
Cisco 7600 Series Router Documentation
•
Obtaining Documentation and Submitting a Service Request
Objectives
This document describes the Cisco 7600 Series Ethernet Services 20G line cards, hereinafter referred to as the Cisco 7600 ES20 line cards, that are supported on the Cisco 7600 series routers. This document also describes how to install the Cisco 7600 ES20 line cards and how to troubleshoot the installation.
Document Revision History
Table 1 records technical changes to this document. The table shows the Cisco IOS software release number and document revision number for the change, the date of the change, and a brief summary of the change.
Organization
This document contains the following chapters:
Section Title DescriptionChapter 1
Cisco 7600 Series Ethernet Services 20G Line Card Product Overview
Provides an introduction to the Cisco 7600 Series Ethernet Services 20G line cards.
Overview: Cisco 7600 Series Ethernet Services 20G Line Cards
Provides a compatibility summary for the Cisco 7600 Series Ethernet Services 20G line cards. For each supported ES20 line card, provides a summary of characteristics and an overview.
Chapter 3
Preparing to Install a Cisco 7600 Series Ethernet Services 20G Line Card
Describes the required tools, equipment, and safety guidelines for installing Cisco 7600 Series Ethernet Services 20G line cards.
Chapter 4
Installing and Removing a Cisco 7600 Series Ethernet Services 20G Line Card
Describes the procedures for installing and removing Cisco 7600 Series Ethernet Services 20G line cards on a Cisco 7600 series router.
Chapter 5
Describes the procedures for installing and removing SFP and XFP modules on Cisco 7600 Series Ethernet Services 20G line cards.
Chapter 6
Provides information for troubleshooting the installation of Cisco 7600 Series Ethernet Services 20G line cards. It also describes helpful debug commands and provides packing instructions.
Related Documentation
The documentation listed below is available online and on the Documentation DVD.
Your router, switch, or gateway and the Cisco IOS software running on it contain extensive features, which are documented in the following resources:
•
Cisco 7600-ES20 Ethernet Line Cards Configuration Guide
•
Cisco IOS software:
–
For Cisco IOS configuration information and support, refer to the configuration guide or command reference for a Cisco IOS mainline release. You can also refer to the specific Cisco IOS software document for a particular feature.
–
To see if a feature is supported by a Cisco IOS release, to locate the software document for that feature, or to check the minimum software requirements of Cisco IOS software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com. You must be a registered user on Cisco.com to access this tool. To access Software Advisor, click Login at Cisco.com, type "Software Advisor" in the SEARCH box, and click GO. Click the link for the Software Advisor tool.
Note
You can access Cisco IOS software configuration and hardware installation and maintenance documentation on the World Wide Web at http://www.cisco.com. Translated documentation is available at the following URL: http://www.cisco.com/public/countries_languages.shtml.
•
For international agency compliance, safety, and statutory information for WAN interfaces:
–
Regulatory Compliance and Safety Information for the Cisco 7600 Series Routers
–
Site Preparation and Safety Guide
Related Documentation
This section refers you to other documentation that also might be useful as you configure your Cisco 7600 series router. The documentation listed below is available online.
Cisco 7600 Series Router Documentation
As you configure your Cisco 7600 series router, you should also refer to the following companion publication for important hardware installation information:
•
Cisco 7600 Series Ethernet Services 20G Line Card Hardware Installation Guide
An overview of the Cisco 7600 series router features, benefits, and applications can be found in the Cisco 7600 Series Internet Router Essentials document located at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_quick_start09186a0080092248.html
Some of the following other Cisco 7600 series router publications might be useful to you as you configure your Cisco 7600 series router.
•
Cisco 7600 Series Cisco IOS Software Configuration Guide
•
Cisco 7600 Series Cisco IOS Command Reference
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_command_reference_list.html
•
Cisco 7600 Series Cisco IOS System Message Guide
http://www.cisco.com/en/US/products/hw/routers/ps368/products_system_message_guides_list.html
•
Cisco 7600 Series Internet Router MIB Specifications Guide
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_technical_reference_list.html.
Several other publications are also related to the Cisco 7600 series router. For a complete reference of related documentation, refer to the Cisco 7600 Series Routers Documentation Roadmap located at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_documentation_roadmaps_list.html.
Other Cisco IOS Software Publications
Your router and the Cisco IOS software running on it contain extensive features. You can find documentation for Cisco IOS software features at the following URL:
http://www.cisco.com/en/US/products/sw/iosswrel/tsd_products_support_category_home.html.
Cisco IOS Release 12.2SR Software Publications
Documentation for Cisco IOS Release 12.2SR, including command reference and system error messages, can be found at the following URL:
http://www.cisco.com/en/US/products/ps6922/tsd_products_support_series_home.html.
Document Conventions
Within the SIP and SPA software configuration guides, the term router is generally used to refer to a variety of Cisco products (for example, routers, access servers, and switches). Routers, access servers, and other networking devices that support Cisco IOS software are shown interchangeably within examples. These products are used only for illustrative purposes; that is, an example that shows one product does not necessarily indicate that other products are not supported.
This documentation uses the following conventions:
Command syntax descriptions use the following conventions:
Nested sets of square brackets or braces indicate optional or required choices within optional or required elements. For example:
Convention Description[x {y | z}]
Braces and a vertical line within square brackets indicate a required choice within an optional element.
Examples use the following conventions:
The following conventions are used to attract the attention of the reader:
CautionMeans reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Note
Means reader take note. Notes contain helpful suggestions or references to materials that may not be contained in this manual.
Tip
Means the following information will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.



