Cisco 7609 Router Installation Guide (OSR-7609)
Technical Specifications

Table Of Contents

Technical Specifications

Cisco 7609 Internet Router

Cisco 7609 Internet Router Power Supplies

Regulatory Standards Compliance


Technical Specifications



Note This document describes the Cisco 7609 Internet Router (OSR-7609) and not the Cisco 7609 Internet Router (CISCO7609).


This appendix provides the technical specifications for the Cisco 7609 Internet Router (OSR-7609):

Cisco 7609 Internet Router

Cisco 7609 Internet Router Power Supplies

Regulatory Standards Compliance

Refer to the Cisco 7600 Series Internet Router Module Installation Guide for module and interface port specifications.

Cisco 7609 Internet Router

The Cisco 7609 Internet Router (OSR-7609) specifications are provided in Table A-1.

Table A-1 Cisco 7609 Internet Router Specifications 

Item
Specification

Environmental

 

Temperature, ambient operating

32°F (0°C) to 104°F (40°C)

Temperature, ambient nonoperating and storage

-40°F (-40°C) to 158°F (70°C)

Humidity (RH), ambient (noncondensing) operating

10% to 90%

Humidity (RH), ambient (noncondensing) nonoperating and storage

5% to 95%

Altitude, operating

Sea level to 6500 feet (2000 m)

Physical Characteristics

 

Dimensions (H x W x D)

33.5 x 17.25 x 18.1 inches (85.1 x 43.1 x 46 cm)

Weight

Chassis only: 55 lb (24.9 kg)
Chassis fully configured with 1 supervisor engine, 8 modules, and 2 AC-input power supplies: 135 lb (61.2 kg)

Power Supply

2500W AC- or DC-input or 4000W AC-input power supply. An optional second power supply can be installed in the chassis.

Airflow

200 lfm1 through system fan assembly

1 lfm = linear feet per minute


Cisco 7609 Internet Router Power Supplies

Table A-2 lists the specifications for the Cisco 7609 Internet Router power supplies.

Table A-2 Cisco 7609 Internet Router Power Supply Specifications 

Item
Specification

2500W AC- and DC-input Power Supplies

 

AC-input type

Autoranging input with power factor corrector.

AC-input voltage

100 to 120 VAC, 200 to 240 VAC (±10% for full range).

AC-input current

16A maximum at 200 VAC at 2500W output.
16A maximum at 100 VAC at 1300W output.

AC-input frequency

50/60 Hz (nominal) (±3% for full range).

Power supply output capacity

1300W maximum (100-120 VAC).
2500W maximum (200-240 VAC or -48 to -60 VDC).

System power dissipation

3520W (total input power) or 3.6 KVA (high-line operation).

DC-input voltage

-48 VDC to -60 VDC continuous.

DC-input current

80A

Power supply output (AC supply)

15A @ +3.3V, 5A @ +5V, 6A @ +12V,
27.5A @ +42V (100/120VAC).

15A @ +3.3V, 5A @ +5V, 10A @ +12V,
55.5A @ +42V (200/240VAC).

Power supply output (DC supply)

15A @ +3.3V, 5A @ +5V, 10A @ +12V,
55.5A @ +42V.

DC input terminal block

Accepts 2-14 AWG copper conductors. Actual size of the wire needed is determined by the installer or local electrician. Terminal block material rated at 150°C.

Output holdup time

20 ms minimum (AC-input power supply).

4 ms (DC-input power supply).

4000W AC-input Power Supply

 

AC-input type

High-line input with power factor corrector, 30A single-phase circuit.

AC-input voltage

200 to 240 VAC (±10% for full range).

AC-input current

23A

Power supply output capacity

4000W maximum.

AC-input frequency

50/60 Hz (nominal) (±3% for full range).

KVA rating

5.4 kVA maximum.

Maximum output current

15A @ +3.3V, 5A @ +5V, 10A @ +12V,
91.20A @ +42V.

Output holdup time

20 ms minimum.


Regulatory Standards Compliance

The Cisco 7609 Internet Router complies with the regulatory standards listed in the Regulatory Compliance and Safety Information for the Cisco 7600 Series Internet Routers publication.