Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.
Revision History
Date
Notes
03/30/2007
Revision History Table added for the first time
08/22/2007
Updated About this Guide
04/09/2008
Added a Note in the "User Password, Login, and Access Policies" section of the Security chapter.
This manual provides reference information for the Cisco ONS 15454 SDH.
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably have experience as a telecommunications technician.
This manual provides reference information for the Cisco ONS 15454 SDH.
Document Organization
Table 1 lists the chapter titles and provides a summary for each chapter.
Table 1 Cisco ONS 15454 SDH Reference Manual Chapters
Includes descriptions of the STM1-4, STM1-8, STM-4, STM4-4, STM-16, STM-64, TXP_MR, TXPP_MR, and MXP cards, as well as card temperature ranges and card compatibility.
Includes descriptions of the optical service channel (OSCM) cards, optical amplifier cards, multiplexer and demultiplexer cards, and optical add/drop multiplexer (OADM) cards.
Includes the SDH configurations used by the ONS 15454 SDH; including MS-SPRings, SNCPs, subtending rings, linear ADMs, and optical bus configurations, as well as information about upgrading optical speeds within any configuration.
Includes the dense wavelength division multiplexing (DWDM) and hybrid node types, as well as configurations used by the ONS 15454 SDH, including hubbed rings, multihubbed rings, meshed rings, linear configurations, single span links, hybrid networks, automatic power control, automatic node setup, and DWDM network topology discovery.
Explains Simple Network Management Protocol (SNMP) as implemented by the Cisco ONS 15454 SDH.
Related Documentation
Use the Cisco ONS 15454 SDH Reference Manual, R4.6 with the following referenced publications:
•Cisco ONS 15454 SDH Procedure Guide, R4.6—Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 SDH node and network.
•Cisco ONS 15454 SDH Troubleshooting Guide, R4.6—Provides general troubleshooting procedures, alarm descriptions and troubleshooting procedures, and hardware replacement instructions.
•Cisco ONS 15454 SDH TL1 Test Access Quick Start Guide—Provides test access TL1 commands, configurations, and parameter types.
•Release Notes for the Cisco ONS 15454 SDH, R4.6—Provides caveats, closed issues, and new feature and functionality information.
Document Conventions
This publication uses the following conventions:
Convention
Application
boldface
Commands and keywords in body text.
italic
Command input that is supplied by the user.
[ ]
Keywords or arguments that appear within square brackets are optional.
{ x | x | x }
A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one.
Ctrl
The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key.
screen font
Examples of information displayed on the screen.
boldface screen font
Examples of information that the user must enter.
< >
Command parameters that must be replaced by module-specific codes.
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the document.
Caution Means reader be careful. In this situation, the user might do something that could result in equipment damage or loss of data.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to the translated safety warnings that accompanied this device.
Note: SAVE THESE INSTRUCTIONS
Note: This documentation is to be used in conjunction with the specific product installation guide that shipped with the product. Please refer to the Installation Guide, Configuration Guide, or other enclosed additional documentation for further details.
For safety and warning information, refer to the Cisco Optical Transport Products Safety and Compliance Information document that accompanied the product. This publication describes the international agency compliance and safety information for the Cisco ONS 15454 system. It also includes translations of the safety warnings that appear in the ONS 15454 system documentation.
Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is available in a CD-ROM package that ships with your product. The Optical Networking Product Documentation CD-ROM is updated periodically and may be more current than printed documentation.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentationas a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
