The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides procedures for managing VNMC management logging.
This chapter includes the following sections:
This section includes the following topics:
•Setting Log Severity Levels and Log Size
•Resetting the Management Log Levels
•Saving Management Log Parameters
You can set the log severity level and log size.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can also perform the set command in the management controller CLI. Each CLI allows you to control a different set of logs.
2. scope monitoring
3. scope sysdebug
4. scope mgmt-logging
5. set [ all { crit | debug0 | debug1 |debug2 | debug3 | debug4 | info | major | minor | warn } | file size <size> | module <Name> { crit | debug0 | debug1 |debug2 | debug3 | debug4 | info | major | minor | warn } ]
This example shows how to assign a critical severity level to all logging files in the resource manager CLI:
vnmc# connect resource-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(resource-mgr)# scope monitoring
vnmc(resource-mgr) /monitoring # scope sysdebug
vnmc(resource-mgr) /monitoring/sysdebug # scope mgmt-logging
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging # set all crit
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging #
You can reset the management log levels.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can also perform the reset command in the management controller CLI. Each CLI allows you to control a different set of logs.
2. scope monitoring
3. scope sysdebug
4. scope mgmt-logging
5. reset
This example shows how to reset the management logging levels in the resource manager CLI:
vnmc# connect resource-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(resource-mgr)# scope monitoring
vnmc(resource-mgr) /monitoring # scope sysdebug
vnmc(resource-mgr) /monitoring/sysdebug # scope mgmt-logging
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging # reset
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging #
You can save the management log parameters.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can also perform the save command in the management controller CLI. Each CLI allows you to control a different set of logs.
2. scope monitoring
3. scope sysdebug
4. scope mgmt-logging
5. save
This example shows how to save in the resource manager CLI:
vnmc# connect resource-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(resource-mgr)# scope monitoring
vnmc(resource-mgr) /monitoring # scope sysdebug
vnmc(resource-mgr) /monitoring/sysdebug # scope mgmt-logging
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging # save
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging #
You can display management logs.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can perform the show command in the management controller CLI. Each CLI allows you to control a different set of logs.
2. scope monitoring
3. scope sysdebug
4. scope mgmt-logging
5. show
This example shows how to display all log files in the resource manager CLI:
vnmc# connect resource-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain
works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL)Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(resource-mgr)# scope monitoring
vnmc(resource-mgr) /monitoring # scope sysdebug
vnmc(resource-mgr) /monitoring/sysdebug # scope mgmt-logging
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging # show
Log File Size Limit: 10000000
Name Level Default Level
--------------------- ------ -------------
agdriver Info Info
ape Info Info
app_sam_cim Info Info
app_sam_dme Info Info
app_sam_ucsmAG Info Info
app_unittest_testsvc Info Info
auth Info Info
autocond Info Info
bio_stream Info Info
callhome Info Info
catalog Info Info
char_stream Info Info
core_transactor Info Info
core_utils Info Info
doer Info Info
event_ Info Info
event_channel Info Info
exception_handling Info Info
fault Info Info
filter Info Info
fsm Info Info
fw Info Info
http_client Info Info
log Info Info
logical Info Info
meta Info Info
method Info Info
mgmt Info Info
mgmtif Info Info
mit_init Info Info
mo Info Info
mo_qualifier Info Info
mod_nuova Info Info
net Info Info
org Info Info
os Info Info
pam_proxy Info Info
pool Info Info
proc_app Info Info
prt Info Info
sam_extXMLApi_ Info Info
sam_sec Info Info
sam_sessionmgrAG Info Info
sam_ucssh Info Info
smbios Info Info
snmp Info Info
solprot Info Info
stats Info Info
sysdebug Info Info
top Info Info
tx Info Info
xml_parser Info Info
vnmc(resource-mgr) /monitoring/sysdebug/mgmt-logging #
You can acknowledge faults.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can perform the acknowledge fault command in the management controller CLI. Each CLI allows you to acknowledge a different set of faults.
1. scope monitoring
2. acknowledge fault <fault-id>
3. commit-buffer
This example shows how to acknowledge a fault in the management controller CLI:
vnmc# scope monitoring
vnmc /monitoring # acknowledge fault 10194
vnmc /monitoring* # commit-buffer
vnmc /monitoring #
You can display a list of audit logs.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can perform the show audit logs command in the management controller CLI. Each CLI allows you to display different set of audit logs.
2. scope monitoring
3. show audit-logs
This example shows how to display a list of audit logs in the management controller CLI:
vnmc# scope monitoring
vnmc /monitoring # show audit-logs
Audit trail logs:
Creation Time User ID Action Description
-------------------- ---------- -------- ---------------- -----------
2010-11-29T14:56:29.195
admin 10615 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.195
admin 10616 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.195
admin 10617 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10607 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10608 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10609 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10610 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10611 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10612 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10613 Modification sysdebug mgmt log
control module
2010-11-29T14:56:29.194
admin 10614 Modification sysdebug mgmt log
vnmc /monitoring #
You can display a list of events.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can perform the show event command in the management controller CLI. Each CLI allows you to display a different set of events.
1. scope monitoring
2. show event
This example shows how to display a list of events in the policy manager CLI:
vnmc# connect policy-mgr
Cisco Virtual Network Management Center
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
vnmc(policy-mgr)# scope monitoring
vnmc(policy-mgr) /monitoring # show event
Creation Time ID Code Description
------------------------ -------- -------- -----------
2010-11-22T12:09:26.369 10161 E4194467 [FSM:END]: Resolve Mgmt Controller Fs
m(FSM:sam:dme:ObserveObservedResolveControllerFsm)
2010-11-22T12:09:26.368 10160 E4194465 [FSM:STAGE:END]: Resolve Mgmt Control
ler FSM Execute(FSM-STAGE:sam:dme:ObserveObservedResolveControllerFsm:Execute)
2010-11-22T12:09:26.367 10158 E4194465 [FSM:STAGE:STALE-SUCCESS]: Resolve Mg
mt Controller FSM Execute(FSM-STAGE:sam:dme:ObserveObservedResolveControllerFsm:
Execute)
2010-11-22T12:09:26.018 10156 E4194465 [FSM:STAGE:ASYNC]: Resolve Mgmt Contr
oller FSM Execute(FSM-STAGE:sam:dme:ObserveObservedResolveControllerFsm:Execute)
2010-11-22T12:09:26.017 10153 E4194447 [FSM:END]: Service Registration Fsm(F
SM:sam:dme:ExtpolEpRegisterFsm)
2010-11-22T12:09:26.017 10154 E4194464 [FSM:BEGIN]: Resolve Mgmt Controller
Fsm(FSM:sam:dme:ObserveObservedResolveControllerFsm)
2010-11-22T12:09:26.017 10155 E4194464 [FSM:STAGE:END]: (FSM-STAGE:sam:dme:O
bserveObservedResolveControllerFsm:begin)
2010-11-22T12:09:26.014 10148 E4194445 [FSM:STAGE:END]: Register FSM Execute
(FSM-STAGE:sam:dme:ExtpolEpRegisterFsm:Execute)
2010-11-22T12:09:25.991 10144 E4194445 [FSM:STAGE:STALE-SUCCESS]: Register F
SM Execute(FSM-STAGE:sam:dme:ExtpolEpRegisterFsm:Execute)
2010-11-22T12:09:25.558 10143 E4194445 [FSM:STAGE:ASYNC]: Register FSM Execu
te(FSM-STAGE:sam:dme:ExtpolEpRegisterFsm:Execute)
2010-11-22T12:09:25.557 10141 E4194444 [FSM:BEGIN]: Service Registration Fsm
(FSM:sam:dme:ExtpolEpRegisterFsm)
2010-11-22T12:09:25.557 10142 E4194444 [FSM:STAGE:END]: (FSM-STAGE:sam:dme:E
xtpolEpRegisterFsm:begin)
vnmc(policy-mgr) /monitoring #
You can display a list of faults.
See VNMC CLIs Basic Commands for basic information about the VNMC CLI.
Management controller
Policy manager
Resource manager
Service registry
Virtual machine manager
1. (Optional) connect {policy-mgr | resource-mgr | service-reg | vm-mgr}
Note Step 1 is optional. You can perform the show fault command in the management controller CLI. Each CLI allows you to display a different set of faults.
2. scope monitoring
3. show fault
This example shows how to display a list of faults in the management controller CLI:
vnmc# scope monitoring
vnmc /monitoring # show fault
Severity Code Last Transition Time ID Description
--------- -------- ------------------------ -------- -----------
Critical F999556 2010-11-24T18:38:17.345 20133 [FSM:FAILED]: internal system backup(FSM:sam:dme:MgmtBackupBackup)
Warning F16516 2010-11-24T18:38:17.344 20131 [FSM:STAGE:FAILED]: internal system backup(FSM-STAGE:sam:dme:MgmtBackupBackup:upload)
Warning F77956 2010-11-24T18:38:17.344 20129 [FSM:STAGE:REMOTE-ERROR]: Result: end-point-failed Code: unspecified Message: Permission denied
(sam:dme:MgmtBackupBackup:upload)
vnmc /monitoring #