This chapter describes the software and hardware requirements to support the Catalyst 6500 series switch or Cisco 7600 series router NAM. This chapter contains these sections:
Note Starting with maintenance image release 2.1(1), there is a single maintenance image for services modules. Refer to this URL: http://www.cisco.com/pcgi-bin/tablebuild.pl/cat6000-serv-maint
Table 2-1 lists the NAM software compatibility requirements for Catalyst operating system software and Cisco IOS software and NAM software.
12.1(13)E4 or later with a Supervisor Engine 2 with an MSFC2
12.1(19)E1 or later with a Supervisor Engine 1A with an MSFC2
12.2(14)SX1 with a WS-SUP720
1.3.1_03 or 1.4.1_02
1.4.1_02 (Windows 2000) and 1.4.0_01 (Solaris)
1Traffic Analyzer does not require a Java plug-in although a plug-in might be required to use Java Virtual Machine (JVM). The Java plug-in versions listed have been tested for browsers that require a plug-in for JVM.
2If you are running a 12.1(13)E-based release, Cisco recommends a later 13E release such as 12.1(13)E11 over 12.1(13)E3.
3Supervisor 1A with MSFC1 or MSFC2, Supervisor 2 with MSFC2 only.
4If you are using a 12.1(13)E-based release, we recommend that you use a later 13E release, for example, Release 12.1(13)E11 over 12.1(13)E3.
Hardware Requirements
Table 2-2 lists the NAM hardware releases that are supported by Catalyst operating system software and Cisco IOS software.
Supervisor Engine 1 with MSFC2, Supervisor Engine 2 with an MSFC2, WS-SUP720, or SUP32
Catalyst 6500 series switches, Cisco 7600 series routers
Browser Requirements
Table 2-3 describes the browser requirements for all platforms. Cisco recommends you use the Internet Explorer browser, but Mozilla and Firefox are also supported.