User Guide for IP Telephony Monitor
Notification MIB
-
User Guide for IP Telephony Monitor
-
Index
-
Preface
-
Introduction
-
Getting Started with ITM
-
Using the Alerts and Activities Display
-
Using Device Management
-
Using IP Phone Information Facility
-
Displaying IPT Security Details
-
Using IP Phone Reachability Testing
-
Using SRST Monitoring Management
-
Using Notification Services
-
Using Fault History
-
Using Phone Monitoring
-
Using ITM Multi-View
-
Configuring and Administering ITM Multi-View
-
Configuring and Administering ITM
-
Managing Groups
-
Configuring Views for the Alerts and Activities Display
-
Configuring Polling and Thresholds
-
Configuring Confidence Tests
-
Administering ITM
-
MIBs Polled
-
Processed and Pass-through Traps, and Unidentified Traps and Events
-
Notification MIB
-
Events Processed
-
Working with Voice Application Systems and Software
-
Polling�SNMP and ICMP
-
How ITM Calculates Repeated Restarts and Flapping
-
ITM Support for SNMP MIBs
-
Download this chapter
Download the complete book
Feedback
Table Of Contents
Notification MIB
The CISCO-EPM-NOTIFICATION-MIB specifies the trap message format IP Telephony Monitor (ITM) uses to generate SNMP traps when an alert occurs. The trap includes the attributes of the alert and the events that caused the alert.
This topic includes the following information:
•
MIB Definition for IDU 4 or Later
•
•
•
MIB Definition for IDU 4 or Later
CISCO-EPM-NOTIFICATION-MIB DEFINITIONS ::= BEGINIMPORTSMODULE-IDENTITY,NOTIFICATION-TYPE,Integer32,Unsigned32,OBJECT-TYPE FROM SNMPv2-SMIMODULE-COMPLIANCE,NOTIFICATION-GROUP,OBJECT-GROUP FROM SNMPv2-CONFTimeStamp FROM SNMPv2-TCSnmpAdminString FROM SNMP-FRAMEWORK-MIBInetAddressType,InetAddress FROM INET-ADDRESS-MIBciscoMgmt FROM CISCO-SMI;ciscoEpmNotificationMIB MODULE-IDENTITYLAST-UPDATED "200406070000Z"ORGANIZATION "Cisco Systems, Inc."CONTACT-INFO "Cisco SystemsCustomer ServicePostal: 170 W Tasman DriveSan Jose, CA 95134Tel: +1 800 553-NETSE-mail: tac@cisco.com"DESCRIPTION"Notifications directly from hardware and software and processednotifications from various management applications can be furtherprocessed and forwarded by still other management applications toindicate the status of devices and software (managed objects).The status of these managed objects can be reported by traps.The CISCO-EPM-NOTIFICATION-MIB contains the trap structure whichcarries the identity and status info of the managed object asanalyzed by such an event processor. It is not possible forreceivers of these traps to query the mib objects.A unique but optional feature of the application generating thetrap defined in this mib is the ability to contain multiplepartitions in the same system running the application. A'Partition' is a logical grouping of a set of managed devices.These devices can belong to only one partition at any giventime. The trap structure will contain information on the exactpartition number and the partition name of the device where itresides.The need for trap generation is to enable multiple managementapplications in the network to have a consolidated view of thewhole network of Cisco and non-Cisco devices."REVISION "200406070000Z"DESCRIPTION"Updated the cenAlarmEntry to include new attributes. The newattributes carries information that adds more value to the alreadyexisting trap structure.The Management application computes events for a device viapolling snmp mib objects on the device and/or by listening toSNMP Traps. Multiple events on a single device roll up into whatis called an Alert - there can be only one alert for a givendevice at any given time. The objects contained in thecenAlarmEntry are the same for both Alert and Event basednotification. The attribute cenAlarmMode added in this revisionof the mib can be used to distinguish between the Alert based andevent based notification.In case of event based notification, the cenAlertID would containthe alert id, as computed by the management system, to which thegenerated event has been rolled up.Traps generated from systems that support mutiple Partition, thecenPartitionNumber and cenPartitionName attributes will carry theexact partition details of the device for which the trap isgenerated.Through the management application user interface, the user cancustomize few attributes of the trap structure. Two attributesincluded in this mib revision that allows the user to customizeeach trap sent out are cenCustomerIdentification andcenCustomerRevision.ciscoEpmNotificationObjectsGroup, ciscoEpmNotificationAlarm, andciscoEpmNotificationMIBCompliance have been deprecated in thisrevision.ciscoEpmNotificationAlarmRev1,ciscoEpmNotificationAlarmGroupRev1,ciscoEpmNotificationMIBComplianceRev1,and ciscoEpmNotificationObjectsGroupRev1 have been newly createdin this revision."REVISION "200308210000Z"DESCRIPTION"Included imports for Integer32, Unsigned32, andNOTIFICATION-GROUP."REVISION "200207281420Z"DESCRIPTION"Initial version of this MIB."::= { ciscoMgmt 311 }-- MIB Object DefinitionsciscoEpmNotificationMIBNotifs OBJECT IDENTIFIER::= { ciscoEpmNotificationMIB 0 }ciscoEpmNotificationMIBObjects OBJECT IDENTIFIER::= { ciscoEpmNotificationMIB 1 }ciscoEpmNotificationMIBConform OBJECT IDENTIFIER::= { ciscoEpmNotificationMIB 2 }cenAlarmData OBJECT IDENTIFIER::= { ciscoEpmNotificationMIBObjects 1}cenAlarmTableMaxLength OBJECT-TYPESYNTAX Unsigned32 ( 1..4294967295 )MAX-ACCESS read-writeSTATUS currentDESCRIPTION"Maximum number of entries permissible in the cenAlarmTable."DEFVAL { 1 }::= { cenAlarmData 1 }cenAlarmTable OBJECT-TYPESYNTAX SEQUENCE OF CenAlarmEntryMAX-ACCESS not-accessibleSTATUS currentDESCRIPTION"A table containing the device identification andalarm value. The maximum number of entries permissiblein this table is defined by cenAlarmTableMaxLength. Whenthe number of entries in the table reaches the maximumlimit, the next entry would replace the oldest existingentry in the table."::= { cenAlarmData 2 }cenAlarmEntry OBJECT-TYPESYNTAX CenAlarmEntryMAX-ACCESS not-accessibleSTATUS currentDESCRIPTION"The information regarding a single device status alarm.An entry is created when an alarm is processed."INDEX { cenAlarmIndex }::= { cenAlarmTable 1 }CenAlarmEntry ::=SEQUENCE {cenAlarmIndex Unsigned32,cenAlarmVersion SnmpAdminString,cenAlarmTimestamp TimeStamp,cenAlarmUpdatedTimestamp TimeStamp,cenAlarmInstanceID SnmpAdminString,cenAlarmStatus Integer32,cenAlarmStatusDefinition SnmpAdminString,cenAlarmType INTEGER,cenAlarmCategory Integer32,cenAlarmCategoryDefinition SnmpAdminString,cenAlarmServerAddressType InetAddressType,cenAlarmServerAddress InetAddress,cenAlarmManagedObjectClass SnmpAdminString,cenAlarmManagedObjectAddressType InetAddressType,cenAlarmManagedObjectAddress InetAddress,cenAlarmDescription OCTET STRING,cenAlarmSeverity Integer32,cenAlarmSeverityDefinition SnmpAdminString,cenAlarmTriageValue Integer32,cenEventIDList OCTET STRING,cenUserMessage1 SnmpAdminString,cenUserMessage2 SnmpAdminString,cenUserMessage3 SnmpAdminString,cenAlarmMode INTEGER,cenPartitionNumber Unsigned32,cenPartitionName SnmpAdminString,cenCustomerIdentification SnmpAdminString,cenCustomerRevision SnmpAdminString,cenAlertID SnmpAdminString}-- Alarm attributescenAlarmIndex OBJECT-TYPESYNTAX Unsigned32 (1..4294967295)MAX-ACCESS not-accessibleSTATUS currentDESCRIPTION"A monotonically increasing integer for the solepurpose of indexing the attributes inciscoEpmNotificationMIBObjects. When the maximum value isreached, this value wraps back to 1."::= { cenAlarmEntry 1 }cenAlarmVersion OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..16))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The release version of this MIB. The version string willbe of the form <major version>.<minorversion>."::= { cenAlarmEntry 2 }cenAlarmTimestamp OBJECT-TYPESYNTAX TimeStampMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The time when the alarm was raised."::= { cenAlarmEntry 3 }cenAlarmUpdatedTimestamp OBJECT-TYPESYNTAX TimeStampMAX-ACCESS read-onlySTATUS currentDESCRIPTION"Alarms persist over time and can have their field(s)change values. The last time a field(s) changed, thisalarm is updated. The updated time denotes this time.Each alarm is identified by the unique alarm instanceid, cenAlarmInstanceID."::= { cenAlarmEntry 4 }cenAlarmInstanceID OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..20))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The Unique Alarm Instance ID."::= { cenAlarmEntry 5 }cenAlarmStatus OBJECT-TYPESYNTAX Integer32 (1..250)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The alarm status indicates the status of the alarmin integer value."::= { cenAlarmEntry 6 }cenAlarmStatusDefinition OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The short description of the status of the alarm.The string is formatted in'<integer>,<alarmStatus description>' tuples. The <integer>value is the same value that the 'cenAlarmStatus'attribute holds. <alarmStatus description> contains one linedescription of the alarm status generated."::= { cenAlarmEntry 7 }cenAlarmType OBJECT-TYPESYNTAX INTEGER {unknown(1),direct(2),indirect(3),mixed(4)}MAX-ACCESS read-onlySTATUS currentDESCRIPTION"unknown: When the value for this attribute could not bedetermined.direct: Denotes an alarm generated by a set of events whereall events are reported by an observation(s) of amanaged object.indirect: Denotes an alarm generated by a set of events whereall events were deduced or inferred by the status ofmanaged objects as determined by the networkmanagement system.mixed: Denotes an alarm generated by a set of events whichwere either direct or indirect."::= { cenAlarmEntry 8 }cenAlarmCategory OBJECT-TYPESYNTAX Integer32 (1..250)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The category of the alarm generated represented ininteger value."::= { cenAlarmEntry 9 }cenAlarmCategoryDefinition OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The short description of the category of the alarmgenerated. The String is formatted in'<integer>,<alarmCategory description>' tuples. The <integer>value is the same value that the 'cenAlarmCategory'attribute holds. <alarmCategory description> contains oneline description of the alarm category generated."::= { cenAlarmEntry 10 }cenAlarmServerAddressType OBJECT-TYPESYNTAX InetAddressTypeMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The type of Internet address by which the serveris reachable. The Server is the serverthat is generating this trap."::= { cenAlarmEntry 11 }cenAlarmServerAddress OBJECT-TYPESYNTAX InetAddressMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The IP Address or the DNS name of the ManagementServer that raised this alarm to be notified."::= { cenAlarmEntry 12 }cenAlarmManagedObjectClass OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The class of the managed object for which thisalarm was generated. For example, Router, Switch,GateKeeper and VoicePort."::= { cenAlarmEntry 13 }cenAlarmManagedObjectAddressType OBJECT-TYPESYNTAX InetAddressTypeMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The type of Internet address by which the managedobject is reachable."::= { cenAlarmEntry 14 }cenAlarmManagedObjectAddress OBJECT-TYPESYNTAX InetAddressMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The IP Address or the DNS name of the Managed Object."::= { cenAlarmEntry 15 }cenAlarmDescription OBJECT-TYPESYNTAX OCTET STRING (SIZE(1..1024))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"A detailed description of the alarm."::= { cenAlarmEntry 16 }cenAlarmSeverity OBJECT-TYPESYNTAX Integer32 (0..100)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The alarm severity indicates the severity of the alarmin integer value."::= { cenAlarmEntry 17 }cenAlarmSeverityDefinition OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The short description of the severity of the alarmgenerated. The String is formatted in'<integer>,<alarmSeverity description>' tuples. The <integer>value is the same value that the 'cenAlarmSeverity 'attribute holds. <alarmSeverity description> contains one linedescription of the alarm severity generated."::= { cenAlarmEntry 18 }cenAlarmTriageValue OBJECT-TYPESYNTAX Integer32(0..100)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The triage value of an alarm is a hierarchical weighting value(applied by the application, and more importantly customizableby the end user) to allow an artificial form of evaluatingimpact, interest, or other user-determined functions betweenalarms. The value is a positive number or zero where zerodenotes an undetermined or uncomputable value."::= { cenAlarmEntry 19 }cenEventIDList OBJECT-TYPESYNTAX OCTET STRING (SIZE(1..1024))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"Comma separated list of the Unique Event identifiersthat led to the generation of this Alarm."::= { cenAlarmEntry 20 }cenUserMessage1 OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. This value can be configured."::= { cenAlarmEntry 21 }cenUserMessage2 OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. This value can be configured."::= { cenAlarmEntry 22 }cenUserMessage3 OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. This value can be configured."::= { cenAlarmEntry 23 }cenAlarmMode OBJECT-TYPESYNTAX INTEGER {unknown(1),alert(2),event(3)}MAX-ACCESS read-onlySTATUS currentDESCRIPTION"unknown: When the value for this attribute could not bedetermined.alert: Denotes an alarm generated by a set of events whereall events are reported by polling of managedobjects and/or listening to SNMP notifications.event: Denotes an event generated by polling of managedojects and/or listening to SNMP notifications."::= { cenAlarmEntry 24 }cenPartitionNumber OBJECT-TYPESYNTAX Unsigned32(0..100)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"In traps generated by the management application that supportmultiple partitions, the attribute will carry the integervalue assigned to identify the logical group where the manageddevice resides."::= { cenAlarmEntry 25 }cenPartitionName OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"In traps generated by the management application that supportmultiple partitions, the attribute will carry the nameassigned to identify the logical group where the manageddevice resides."::= { cenAlarmEntry 26 }cenCustomerIdentification OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. The attribute takes in a free formattext. This attribute can be used by advanced managementapplications to sort responses from the fault managementserver."::= { cenAlarmEntry 27 }cenCustomerRevision OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. The attribute takes in a free formattext. This attribute can be used by advanced managementapplications to sort responses from the fault managementserver."::= { cenAlarmEntry 28 }cenAlertID OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..20))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"In event based notification, this attribute will contain thealert id to which the generated event has been rolled upto. In alert based notification, the cenAlarmInstanceId andcenAlertID would be identical."::= { cenAlarmEntry 29 }ciscoEpmNotificationAlarm NOTIFICATION-TYPEOBJECTS {cenAlarmVersion,cenAlarmTimestamp,cenAlarmUpdatedTimestamp,cenAlarmInstanceID,cenAlarmStatus,cenAlarmStatusDefinition,cenAlarmType,cenAlarmCategory,cenAlarmCategoryDefinition,cenAlarmServerAddressType,cenAlarmServerAddress,cenAlarmManagedObjectClass,cenAlarmManagedObjectAddressType,cenAlarmManagedObjectAddress,cenAlarmDescription,cenAlarmSeverity,cenAlarmSeverityDefinition,cenAlarmTriageValue,cenEventIDList,cenUserMessage1,cenUserMessage2,cenUserMessage3}STATUS deprecatedDESCRIPTION"Notification of the status of the managed object asgenerated by the management server.New attributes are added to the ciscoEpmNotificationAlarmRev1.Hence this notification is deprecated."::= { ciscoEpmNotificationMIBNotifs 1 }ciscoEpmNotificationAlarmRev1 NOTIFICATION-TYPEOBJECTS {cenAlarmVersion,cenAlarmTimestamp,cenAlarmUpdatedTimestamp,cenAlarmInstanceID,cenAlarmStatus,cenAlarmStatusDefinition,cenAlarmType,cenAlarmCategory,cenAlarmCategoryDefinition,cenAlarmServerAddressType,cenAlarmServerAddress,cenAlarmManagedObjectClass,cenAlarmManagedObjectAddressType,cenAlarmManagedObjectAddress,cenAlarmDescription,cenAlarmSeverity,cenAlarmSeverityDefinition,cenAlarmTriageValue,cenEventIDList,cenUserMessage1,cenUserMessage2,cenUserMessage3,cenAlarmMode,cenPartitionNumber,cenPartitionName,cenCustomerIdentification,cenCustomerRevision,cenAlertID}STATUS currentDESCRIPTION"Notification of the status of the managed object asgenerated by the management server."::= { ciscoEpmNotificationMIBNotifs 2 }-- Conformance informationciscoEpmNotificationMIBCompliances OBJECT IDENTIFIER::= { ciscoEpmNotificationMIBConform 1 }ciscoEpmNotificationMIBGroups OBJECT IDENTIFIER::= { ciscoEpmNotificationMIBConform 2 }-- ComplianceciscoEpmNotificationMIBCompliance MODULE-COMPLIANCESTATUS deprecatedDESCRIPTION"The compliance statement for entities whichimplement the CISCO-EPM-NOTIFICATION-MIB.New attributes are included inciscoEpmNotificationMIBComplianceRev1. Hence this object isdeprecated."MODULE -- this moduleMANDATORY-GROUPS {ciscoEpmNotificationObjectsGroup,ciscoEpmNotificationAlarmGroup}GROUP ciscoEpmAlarmConfigGroupDESCRIPTION"This group is optional."OBJECT cenAlarmTableMaxLengthMIN-ACCESS read-onlyDESCRIPTION"Write access is not required."OBJECT cenAlarmVersionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTimestampMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmUpdatedTimestampMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmInstanceIDMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmStatusMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmStatusDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmCategoryMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmCategoryDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmServerAddressTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmServerAddressMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectClassMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectAddressTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectAddressMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmDescriptionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmSeverityMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmSeverityDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTriageValueMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenEventIDListMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage1MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage2MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage3MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."::= { ciscoEpmNotificationMIBCompliances 1 }ciscoEpmNotificationMIBComplianceRev1 MODULE-COMPLIANCESTATUS currentDESCRIPTION"The compliance statement for entities whichimplement the CISCO-EPM-NOTIFICATION-MIB."MODULE -- this moduleMANDATORY-GROUPS {ciscoEpmNotificationObjectsGroupRev1,ciscoEpmNotificationAlarmGroupRev1}GROUP ciscoEpmAlarmConfigGroupDESCRIPTION"This group is optional."OBJECT cenAlarmTableMaxLengthMIN-ACCESS read-onlyDESCRIPTION"Write access is not required."OBJECT cenAlarmVersionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTimestampMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmUpdatedTimestampMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmInstanceIDMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmStatusMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmStatusDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmCategoryMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmCategoryDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmServerAddressTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmServerAddressMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectClassMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectAddressTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectAddressMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmDescriptionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmSeverityMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmSeverityDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTriageValueMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenEventIDListMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage1MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage2MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage3MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmModeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenPartitionNumberMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenPartitionNameMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenCustomerIdentificationMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenCustomerRevisionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlertIDMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."::= { ciscoEpmNotificationMIBCompliance 2 }-- Units of ConformanceciscoEpmNotificationAlarmGroup NOTIFICATION-GROUPNOTIFICATIONS {ciscoEpmNotificationAlarm}STATUS deprecatedDESCRIPTION"The collection of notifications used to indicate managedobject status.ciscoEpmNotificationAlarmGroupRev1 is defined. Hence thisobject is deprecated."::= { ciscoEpmNotificationMIBGroups 1 }ciscoEpmNotificationObjectsGroup OBJECT-GROUPOBJECTS {cenAlarmVersion,cenAlarmTimestamp,cenAlarmUpdatedTimestamp,cenAlarmInstanceID,cenAlarmStatus,cenAlarmStatusDefinition,cenAlarmType,cenAlarmCategory,cenAlarmCategoryDefinition,cenAlarmServerAddressType,cenAlarmServerAddress,cenAlarmManagedObjectClass,cenAlarmManagedObjectAddressType,cenAlarmManagedObjectAddress,cenAlarmDescription,cenAlarmSeverity,cenAlarmSeverityDefinition,cenAlarmTriageValue,cenEventIDList,cenUserMessage1,cenUserMessage2,cenUserMessage3}STATUS deprecatedDESCRIPTION"Trap reflecting the alarm.New attributes are added to the new notificationciscoEpmNotificationObjectsGroupRev1. Hencethis object is deprecated."::= { ciscoEpmNotificationMIBGroups 2 }ciscoEpmAlarmConfigGroup OBJECT-GROUPOBJECTS { cenAlarmTableMaxLength }STATUS currentDESCRIPTION"A collection of objects providing informationabout the total number of cenAlarmTable entriesmaintained."::= { ciscoEpmNotificationMIBGroups 3 }ciscoEpmNotificationAlarmGroupRev1 NOTIFICATION-GROUPNOTIFICATIONS {ciscoEpmNotificationAlarmRev1}STATUS currentDESCRIPTION"The collection of notifications used to indicate managed objectstatus."::= { ciscoEpmNotificationMIBGroups 4 }ciscoEpmNotificationObjectsGroupRev1 OBJECT-GROUPOBJECTS {cenAlarmVersion,cenAlarmTimestamp,cenAlarmUpdatedTimestamp,cenAlarmInstanceID,cenAlarmStatus,cenAlarmStatusDefinition,cenAlarmType,cenAlarmCategory,cenAlarmCategoryDefinition,cenAlarmServerAddressType,cenAlarmServerAddress,cenAlarmManagedObjectClass,cenAlarmManagedObjectAddressType,cenAlarmManagedObjectAddress,cenAlarmDescription,cenAlarmSeverity,cenAlarmSeverityDefinition,cenAlarmTriageValue,cenEventIDList,cenUserMessage1,cenUserMessage2,cenUserMessage3,cenAlarmMode,cenPartitionNumber,cenPartitionName,cenCustomerIdentification,cenCustomerRevision,cenAlertID}STATUS currentDESCRIPTION"Notification reflecting the alarm."::= { ciscoEpmNotificationMIBGroups 5 }ENDMIB Definition for ITM Releases Before IDU 4
CISCO-EPM-NOTIFICATION-MIB DEFINITIONS ::= BEGINIMPORTSMODULE-IDENTITY,NOTIFICATION-TYPE,Integer32,Unsigned32,OBJECT-TYPE FROM SNMPv2-SMIMODULE-COMPLIANCE,NOTIFICATION-GROUP,OBJECT-GROUP FROM SNMPv2-CONFTimeStamp FROM SNMPv2-TCSnmpAdminString FROM SNMP-FRAMEWORK-MIBInetAddressType,InetAddress FROM INET-ADDRESS-MIBciscoMgmt FROM CISCO-SMI;ciscoEpmNotificationMIB MODULE-IDENTITYLAST-UPDATED "200308210000Z"ORGANIZATION "Cisco Systems, Inc."CONTACT-INFO "Cisco SystemsCustomer ServicePostal:170 W Tasman DriveSan Jose, CA 95134Tel:+1 800 553-NETSE-mail:tac@cisco.com"DESCRIPTION"Notifications directly from hardware and software and processednotifications from various management applications can be furtherprocessed and forwarded by still other management applications toindicate the status of devices and software (managed objects).The status of these managed objects can be reported by traps.The CISCO-EPM-NOTIFICATION-MIB contains the trap structure whichcarries the identity and status info of the managed object asanalyzed by such an event processor. It is not possible forreceivers of these traps to query the mib objects.The need for trap generation is to enable multiple managementapplications in the network to have a consolidated view of thewhole network of Cisco and non-Cisco devices."REVISION "200308210000Z"DESCRIPTION"Included imports for Integer32, Unsigned32, andNOTIFICATION-GROUP."REVISION "200207281420Z"DESCRIPTION"Initial version of this MIB."::= { ciscoMgmt 311 }-- MIB Object DefinitionsciscoEpmNotificationMIBNotifs OBJECT IDENTIFIER::= { ciscoEpmNotificationMIB 0 }ciscoEpmNotificationMIBObjects OBJECT IDENTIFIER::= { ciscoEpmNotificationMIB 1 }ciscoEpmNotificationMIBConform OBJECT IDENTIFIER::= { ciscoEpmNotificationMIB 2 }cenAlarmData OBJECT IDENTIFIER::= { ciscoEpmNotificationMIBObjects 1}cenAlarmTableMaxLength OBJECT-TYPESYNTAX Unsigned32 ( 1..4294967295 )MAX-ACCESS read-writeSTATUS currentDESCRIPTION"Maximum number of entries permissible in the cenAlarmTable."DEFVAL { 1 }::= { cenAlarmData 1 }cenAlarmTable OBJECT-TYPESYNTAX SEQUENCE OF CenAlarmEntryMAX-ACCESS not-accessibleSTATUS currentDESCRIPTION"A table containing the device identification andalarm value. The maximum number of entries permissiblein this table is defined by cenAlarmTableMaxLength. Whenthe number of entries in the table reaches the maximumlimit, the next entry would replace the oldest existingentry in the table."::= { cenAlarmData 2 }cenAlarmEntry OBJECT-TYPESYNTAX CenAlarmEntryMAX-ACCESS not-accessibleSTATUS currentDESCRIPTION"The information regarding a single device status alarm.An entry is created when an alarm is processed."INDEX { cenAlarmIndex }::= { cenAlarmTable 1 }CenAlarmEntry ::=SEQUENCE {cenAlarmIndex Unsigned32,cenAlarmVersion SnmpAdminString,cenAlarmTimestamp TimeStamp,cenAlarmUpdatedTimestamp TimeStamp,cenAlarmInstanceID SnmpAdminString,cenAlarmStatus Integer32,cenAlarmStatusDefinition SnmpAdminString,cenAlarmType INTEGER,cenAlarmCategory Integer32,cenAlarmCategoryDefinition SnmpAdminString,cenAlarmServerAddressType InetAddressType,cenAlarmServerAddress InetAddress,cenAlarmManagedObjectClass SnmpAdminString,cenAlarmManagedObjectAddressType InetAddressType,cenAlarmManagedObjectAddress InetAddress,cenAlarmDescription OCTET STRING,cenAlarmSeverity Integer32,cenAlarmSeverityDefinition SnmpAdminString,cenAlarmTriageValue Integer32,cenEventIDList OCTET STRING,cenUserMessage1 SnmpAdminString,cenUserMessage2 SnmpAdminString,cenUserMessage3 SnmpAdminString}-- Alarm attributescenAlarmIndex OBJECT-TYPESYNTAX Unsigned32 (1..4294967295)MAX-ACCESS not-accessibleSTATUS currentDESCRIPTION"A monotonically increasing integer for the solepurpose of indexing the attributes inciscoEpmNotificationMIBObjects. When the maximum value isreached, this value wraps back to 1."::= { cenAlarmEntry 1 }cenAlarmVersion OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..16))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The release version of this MIB. The version string willbe of the form <major version>.<minorversion>."::= { cenAlarmEntry 2 }cenAlarmTimestamp OBJECT-TYPESYNTAX TimeStampMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The time when the alarm was raised."::= { cenAlarmEntry 3 }cenAlarmUpdatedTimestamp OBJECT-TYPESYNTAX TimeStampMAX-ACCESS read-onlySTATUS currentDESCRIPTION"Alarms persist over time and can have their field(s)change values. The last time a field(s) changed, thisalarm is updated. The updated time denotes this time.Each alarm is identified by the unique alarm instanceid, cenAlarmInstanceID."::= { cenAlarmEntry 4 }cenAlarmInstanceID OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..20))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The Unique Alarm Instance ID."::= { cenAlarmEntry 5 }cenAlarmStatus OBJECT-TYPESYNTAX Integer32 (1..250)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The alarm status indicates the status of the alarmin integer value."::= { cenAlarmEntry 6 }cenAlarmStatusDefinition OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The short description of the status of the alarm.The string is formatted in'<integer>,<alarmStatus description>' tuples. The <integer>value is the same value that the 'cenAlarmStatus'attribute holds. <alarmStatus description> contains one linedescription of the alarm status generated."::= { cenAlarmEntry 7 }cenAlarmType OBJECT-TYPESYNTAX INTEGER {unknown(1),direct(2),indirect(3),mixed(4)}MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The description of the type of alarm generated. The valueswill be either UNKNOWN, DIRECT, INDIRECT or MIXED.unknown: When the value for this attribute could not bedetermined.direct: Denotes an alarm generated by a set of events whereall events are reported by an observation(s) of amanaged object.indirect: Denotes an alarm generated by a set of events whereall events were deduced or inferred by the status ofmanaged objects as determined by the networkmanagement system.mixed: Denotes an alarm generated by a set of events whichwere either DIRECT or INDIRECT."::= { cenAlarmEntry 8 }cenAlarmCategory OBJECT-TYPESYNTAX Integer32 (1..250)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The category of the alarm generated represented ininteger value."::= { cenAlarmEntry 9 }cenAlarmCategoryDefinition OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The short description of the category of the alarmgenerated. The String is formatted in'<integer>,<alarmCategory description>' tuples. The <integer>value is the same value that the 'cenAlarmCategory'attribute holds. <alarmCategory description> contains oneline description of the alarm category generated."::= { cenAlarmEntry 10 }cenAlarmServerAddressType OBJECT-TYPESYNTAX InetAddressTypeMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The type of Internet address by which the serveris reachable. The Server is the serverthat is generating this trap."::= { cenAlarmEntry 11 }cenAlarmServerAddress OBJECT-TYPESYNTAX InetAddressMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The IP Address or the DNS name of the ManagementServer that raised this alarm to be notified."::= { cenAlarmEntry 12 }cenAlarmManagedObjectClass OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The class of the managed object for which thisalarm was generated. For example, Router, Switch,GateKeeper and VoicePort."::= { cenAlarmEntry 13 }cenAlarmManagedObjectAddressType OBJECT-TYPESYNTAX InetAddressTypeMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The type of Internet address by which the managedobject is reachable."::= { cenAlarmEntry 14 }cenAlarmManagedObjectAddress OBJECT-TYPESYNTAX InetAddressMAX-ACCESS read-onlySTATUS currentDESCRIPTION"The IP Address or the DNS name of the Managed Object."::= { cenAlarmEntry 15 }cenAlarmDescription OBJECT-TYPESYNTAX OCTET STRING (SIZE(1..1024))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"A detailed description of the alarm."::= { cenAlarmEntry 16 }cenAlarmSeverity OBJECT-TYPESYNTAX Integer32 (0..100)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The alarm severity indicates the severity of the alarmin integer value."::= { cenAlarmEntry 17 }cenAlarmSeverityDefinition OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The short description of the severity of the alarmgenerated. The String is formatted in'<integer>,<alarmSeverity description>' tuples. The <integer>value is the same value that the 'cenAlarmSeverity 'attribute holds. <alarmSeverity description> contains one linedescription of the alarm severity generated."::= { cenAlarmEntry 18 }cenAlarmTriageValue OBJECT-TYPESYNTAX Integer32(0..100)MAX-ACCESS read-onlySTATUS currentDESCRIPTION"The triage value of an alarm is a hierarchical weighting value(applied by the application, and more importantly customizableby the end user) to allow an artificial form of evaluatingimpact, interest, or other user-determined functions betweenalarms. The value is a positive number or zero where zerodenotes an undetermined or uncomputable value."::= { cenAlarmEntry 19 }cenEventIDList OBJECT-TYPESYNTAX OCTET STRING (SIZE(1..1024))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"Comma separated list of the Unique Event identifiersthat led to the generation of this Alarm."::= { cenAlarmEntry 20 }cenUserMessage1 OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. This value can be configured."::= { cenAlarmEntry 21 }cenUserMessage2 OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. This value can be configured."::= { cenAlarmEntry 22 }cenUserMessage3 OBJECT-TYPESYNTAX SnmpAdminString (SIZE(1..255))MAX-ACCESS read-onlySTATUS currentDESCRIPTION"User input message. This value can be configured."::= { cenAlarmEntry 23 }ciscoEpmNotificationAlarm NOTIFICATION-TYPEOBJECTS {cenAlarmVersion,cenAlarmTimestamp,cenAlarmUpdatedTimestamp,cenAlarmInstanceID,cenAlarmStatus,cenAlarmStatusDefinition,cenAlarmType,cenAlarmCategory,cenAlarmCategoryDefinition,cenAlarmServerAddressType,cenAlarmServerAddress,cenAlarmManagedObjectClass,cenAlarmManagedObjectAddressType,cenAlarmManagedObjectAddress,cenAlarmDescription,cenAlarmSeverity,cenAlarmSeverityDefinition,cenAlarmTriageValue,cenEventIDList,cenUserMessage1,cenUserMessage2,cenUserMessage3}STATUS currentDESCRIPTION"Notification of the status of the managed object asgenerated by the management server."::= { ciscoEpmNotificationMIBNotifs 1 }-- Conformance informationciscoEpmNotificationMIBCompliances OBJECT IDENTIFIER::= { ciscoEpmNotificationMIBConform 1 }ciscoEpmNotificationMIBGroups OBJECT IDENTIFIER::= { ciscoEpmNotificationMIBConform 2 }-- ComplianceciscoEpmNotificationMIBCompliance MODULE-COMPLIANCESTATUS currentDESCRIPTION"The compliance statement for entities whichimplement the CISCO-EPM-NOTIFICATION-MIB."MODULE -- this moduleMANDATORY-GROUPS {ciscoEpmNotificationObjectsGroup,ciscoEpmNotificationAlarmGroup}GROUP ciscoEpmAlarmConfigGroupDESCRIPTION"This group is optional."OBJECT cenAlarmTableMaxLengthMIN-ACCESS read-onlyDESCRIPTION"Write access is not required."OBJECT cenAlarmVersionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTimestampMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmUpdatedTimestampMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmInstanceIDMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmStatusMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmStatusDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmCategoryMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmCategoryDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmServerAddressTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmServerAddressMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectClassMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectAddressTypeMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmManagedObjectAddressMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmDescriptionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmSeverityMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmSeverityDefinitionMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenAlarmTriageValueMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenEventIDListMIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage1MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage2MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."OBJECT cenUserMessage3MIN-ACCESS accessible-for-notifyDESCRIPTION"Read access is not required."::= { ciscoEpmNotificationMIBCompliances 1 }-- Units of ConformanceciscoEpmNotificationAlarmGroup NOTIFICATION-GROUPNOTIFICATIONS {ciscoEpmNotificationAlarm}STATUS currentDESCRIPTION"The collection of notifications used to indicate managed objectstatus."::= { ciscoEpmNotificationMIBGroups 1 }ciscoEpmNotificationObjectsGroup OBJECT-GROUPOBJECTS {cenAlarmVersion,cenAlarmTimestamp,cenAlarmUpdatedTimestamp,cenAlarmInstanceID,cenAlarmStatus,cenAlarmStatusDefinition,cenAlarmType,cenAlarmCategory,cenAlarmCategoryDefinition,cenAlarmServerAddressType,cenAlarmServerAddress,cenAlarmManagedObjectClass,cenAlarmManagedObjectAddressType,cenAlarmManagedObjectAddress,cenAlarmDescription,cenAlarmSeverity,cenAlarmSeverityDefinition,cenAlarmTriageValue,cenEventIDList,cenUserMessage1,cenUserMessage2,cenUserMessage3}STATUS currentDESCRIPTION"Trap reflecting the alarm."::= { ciscoEpmNotificationMIBGroups 2 }ciscoEpmAlarmConfigGroup OBJECT-GROUPOBJECTS { cenAlarmTableMaxLength }STATUS currentDESCRIPTION"A collection of objects providing informationabout the total number of cenAlarmTable entriesmaintained."::= { ciscoEpmNotificationMIBGroups 3 }ENDcenAlarmEntry Object-Type—Definitions for Selected Attributes
Table C-1 explains the values for attributes related to alert status, category, and severity. You might find it useful to consult this information when you look at a generated trap.
Table C-1 CenAlarmEntry—Alert Status, Category, and Severity
(6)
(7)
cenAlarmStatus
cenAlarmStatusDefinition
Number—From 1 to 3.
String—Includes number (cenAlarmStatus) and description:
1-ACK
2-Active
3-Cleared
Note
(9)
(10)
cenAlarmCategory
cenAlarmCategoryDefinition
Number—From 0 to 9.
String—Includes number (cenAlarmCategory) and description:
0-Unknown
1-Application
2-Environment
3-Interface
4-Reachability
5-Connectivity
6-Utilization
7-System Hardware
8-Security
9-Other
(17)
(18)
cenAlarmSeverity
cenAlarmSeverityDefinition
Number—From 1 to 3.
String—Includes number (cenAlarmSeverity) and description:
1-Informational
2-Warning
3-Critical
cenUserMessage1 Object-Type—Attribute with Partition Information
ITM stores the partition number and alias for the identified device in the cenUserMessage1 object-type. The partition number and alias are separated by a colon; for example, Partition 1: Enterprise1.
This information is most important to users of ITM Multi-View. For ITM, the value is Partition 0: P0.