Guest

Support

Prerequisites

Hierarchical Navigation

Downloads

 Feedback

Table Of Contents

Prerequisites

Product Overview

CiscoWorks2000 Upgrade

Server Requirements

Solaris Patches

Client Requirements

Integration Utility Standalone Requirements

Supported Devices

Supported Network Management System Environments


Prerequisites


This chapter describes the factors that you should consider before installing CiscoWorks2000 CD One on a Solaris system. It contains:

Product Overview

Server Requirements

Client Requirements

Integration Utility Standalone Requirements

Supported Devices

Supported Network Management System Environments

Product Overview

CD One software, the foundation for CiscoWorks2000 Family of Products, enables the deployment, monitoring, and troubleshooting of devices across your network. CD One includes a web-server component, web-based tools, and web-browser capability. The functional components are:

CiscoView—A graphical device management tool

CiscoWorks2000 Server—Common set of management services shared by all CiscoWorks2000 products

Integration Utility—An integration module that provides support for third party network management systems (NMS)

CiscoWorks2000 Upgrade

If you are installing CiscoWorks2000 for the first time, see the "Performing a New Installation" section. If you are upgrading from CiscoWorks2000 CD One 1st Edition, see the "Performing a New Installation" section. If you are upgrading from any other CiscoWorks2000 application, refer to your specific CiscoWorks2000 application installation guide for supported upgrade information and see the "Performing an Upgrade Installation" section.


Note During an upgrade from a previous version of CD One, the data is preserved. However, during an upgrade from other CiscoWorks2000 applications, previous product versions are removed, but the database, ANI information, community strings, user and host information, and application-specific data files are preserved and will be restored during the new product version installations.


You must use the CD One installation program to perform upgrades. See the "Installing CD One" chapter.

Server Requirements

The minimum system requirements for the CiscoWorks2000 Server are shown in Table 1-1.

Table 1-1 Server System Requirements

Requirement Type
Minimum Requirements

System hardware

Sparc Ultra 10.

17-inch color monitor.

CD-ROM drive.

Memory (RAM)

256 MB.

Available drive space

2 GB on the partition on which you install the product (the default is /opt).

Swap space equal to double the amount of memory (RAM). For example, if your system has 256 MB of RAM, you need 512 MB of swap space.

System software

Solaris 2.6.

Additional software (Optional)

Netscape Navigator 4.6.1 or 4.7 (if you are using the CiscoWorks2000 desktop on the server system).


To verify the amount of available disk space in each of the specified partitions and directories, enter:

# df -k directory

where directory is the partition or directory for which you want to check the available disk space.

Solaris Patches

The following patches are required:

105181-15

105210-17

105490-05 (or 107733-05)

105529-07

105568-13

The following patches are optional:

106040-10 (Japanese)

105633-21 (Asian)

106409-01 (Traditional Chinese characters)

Use the showrev -p command to verify that these patches have been applied.


Caution Make sure patch 106292-03 is not installed on your system. Otherwise CD One will not install.

Client Requirements

The minimum system requirements for the CiscoWorks2000 client are shown in Table 1-2. For information about configuring client systems, see the "Preparing to Use CD One" chapter.

Table 1-2 Client System Requirements 

Requirement Type
Minimum Requirements

System hardware and software

Client system:

IBM PC-compatible computer with 300 MHz Pentium processor running Windows NT 4.0, Windows 95, or Windows 98.

SPARC Ultra 10 running Solaris 2.5.1 or Solaris 2.6.

IBM RS/ 6000 workstation running AIX 4.33.

HP900 workstation running HP-UX 10.20 or 11.0.

Color monitor with video card set to 256 colors.

Memory (RAM)

128 MB.

Browser

Netscape Navigator 4.6.1 or 4.7.
(Windows NT, Windows 95/98, Solaris 2.5.1, Solaris 2.6)

Microsoft Internet Explorer 5.0 or 5.01.
Java Virtual Machine (JVM) version 5.0.0.317 or current shipping version.
To verify the JVM, select View > Java Console.
(Windows NT, Windows 95/98)


Integration Utility Standalone Requirements

The minimum requirements for Integration Utility as a standalone system are shown in Table 1-3.

Table 1-3 Integration Utility System Requirements

Requirement Type
Minimum Requirements

System hardware and software

Client system:

IBM PC-compatible computer with 300 MHz Pentium processor running Windows NT 4.0, Windows 95, or Windows 98.

SPARC Ultra 10 running Solaris 2.5.1 or Solaris 2.6.

GUI monitor.

Memory (RAM)

64 MB.

Browser

Netscape Navigator 4.6.1 or 4.7.
(Windows NT, Windows 95/98, Solaris 2.5.1, Solaris 2.6)

 

Microsoft Internet Explorer 5.0 or 5.01.
JVM version 5.0.0.317 or current shipping version.
To verify the JVM version, select View > Java Console. (Windows NT, Windows 95/98)


Supported Devices

CiscoView, a major component of CD One, manages and configures different types of Cisco devices. Refer to Using CiscoView for supported device information.

Supported Network Management System Environments

You can import devices locally from UNIX and Windows NT systems. You can import devices remotely from a UNIX system only. The network management system (NMS) supported for importing device information into the CiscoView application is HP OpenView Network Node Manager. Refer to Using CiscoView and the online help for information about importing devices.