Feedback
|
Table Of Contents
Readme for Campus Manager 5.1.3 on Solaris
Hardware and Software Requirements
Patches Rolled into Campus Manager 5.1.3
Supported Devices in Campus Manager 5.1.3
Downloading Campus Manager 5.1.3
Downloading From Software Center
Installing Campus Manager 5.1.3
Reinstalling Campus Manager 5.1.3
Known Problems in Campus Manager 5.1.3
Resolved Problems in Campus Manager 5.1.3
Readme for Campus Manager 5.1.3 on Solaris
This Readme is for Campus Manager 5.1.3 on Solaris. It contains:
•
Hardware and Software Requirements
•
Patches Rolled into Campus Manager 5.1.3
•
Supported Devices in Campus Manager 5.1.3
•
Downloading Campus Manager 5.1.3
•
Installing Campus Manager 5.1.3
•
Reinstalling Campus Manager 5.1.3
•
Known Problems in Campus Manager 5.1.3
•
Resolved Problems in Campus Manager 5.1.3
Description
Campus Manager 5.1.3 is a software update for Campus Manager 5.1. In addition to the devices supported, this package contains fixes to both existing and newly discovered problems.
You should print out and read this document before installing Campus Manager 5.1.3.
CautionCampus Manager 5.1.3 has specific prerequisites. Before installing Campus Manager 5.1.3, see "Hardware and Software Requirements" section.
Related Documentation
Table 1 lists the devices supported in Campus Manager 5.1.3.
A list of all devices supported in Campus Manager 5.1 is provided in Supported Devices Tables for LMS 3.1 on Cisco.com.
To access this, go to:
http://www.cisco.com/en/US/products/sw/cscowork/ps563/products_device_support_tables_list.html
For a list of fixes to known problems, see "Resolved Problems in Campus Manager 5.1.3" section.
A list of all known and resolved problems in Campus Manager 5.1, including the patches containing fixes for known problems rolled into latest SP, is available in Release Notes on Cisco.com.
To access them, go to:
http://www.cisco.com/en/US/products/sw/cscowork/ps563/prod_release_notes_list.html
Note
We sometimes update the printed and electronic documentation after original publication. Therefore, we recommend that you also review other documentation for Campus Manager 5.1.3 on Cisco.com for any updates.
Hardware and Software Requirements
Campus Manager 5.1.3 requires that you have installed CiscoWorks Common Services 3.2 and Campus Manager 5.1.
For LMS 3.1 users, CiscoWorks Common Services 3.2 and Campus Manager 5.1 are available as a part of CiscoWorks LMS 3.1.
Hardware and software requirements are the same as those needed for CiscoWorks Common Services 3.2 and Campus Manager 5.1.
A detailed list of requirements and instructions to install CiscoWorks Common Services 3.2 and Campus Manager 5.1, is available on Cisco.com.
For more information, refer the following documents:
•
Release Notes for Campus Manager 5.1
•
Installing and Getting Started With CiscoWorks LAN Management Solution 3.1
To access the documents, go to:
http://www.cisco.com/en/US/products/sw/cscowork/ps563/prod_release_notes_list.html
CM 5.1.3 Upgrade Path
Use the table below to verify the upgrade path to Campus Manager 5.1.3:
If you have installed... You must install...CM 5.0
LMS 3.0 December 2007 Update or CM 5.0.2
LMS 3.1
CM 5.1.3
Patches Rolled into Campus Manager 5.1.3
There are no patches, containing fixes for the bugs, rolled into Campus Manager 5.1.3.
Supported Devices in Campus Manager 5.1.3
Table 1 lists the devices supported in Campus Manager 5.1.3.
For a list of all devices supported in Campus Manager 5.1, see the Supported Devices Table for LMS 3.1 on Cisco.com (see the "Related Documentation" section).
.
Table 1 Supported Devices in Campus Manager 5.1.3
Device Type Devices/
Modules Supported sys
ObjectID Topology VLAN Mgmt LANE Mgmt ATM Mgmt User Tracking Minimum SoftwareCisco MWR 2900 Series Mobile Wireless Routers
Cisco MWR 2941-DC Mobile Wireless Router(MWR-2941-DC)
1.3.6.1.4.1.9.1.1014
Yes
NA
NA
NA
NA
124-19.MR2
Data Center Switches
Cisco Nexus 5010 Switch(N5K-C5010P-BF)
1.3.6.1.4.1.9.12.3.1.3.798
Yes
No
NA
NA
No
4.0(1a)N1 (1)
Data Center Switches
Cisco Nexus 7000 18-Slot Switch(N7K-C7018)
1.3.6.1.4.1.9.12.3.1.3.777
Yes
No
NA
NA
No
__
Cisco Wide Area Application Engine (WAE) Appliances
Cisco WAE-674 Wide Area Application Engine(WAE-674)
1.3.6.1.4.1.9.1.957
Yes
NA
NA
NA
NA
WAAS 4.1.1
Cisco Wide Area Application Engine (WAE) Appliances
Cisco WAE-7371 Wide Area Application Engine(WAE-7371)
1.3.6.1.4.1.9.1.908
Yes
NA
NA
NA
NA
WAAS 4.1.1
Cisco Wide Area Application Engine (WAE) Appliances
Cisco WAE-7341 Content Engine(WAE-7341)
1.3.6.1.4.1.9.1.907
Yes
NA
NA
NA
NA
WAAS 4.1.1
Network Analysis Modules
Cisco NAM 2204 Appliance(NAM2220)
1.3.6.1.4.1.9.1.1033
Yes
NA
NA
NA
NA
4.0(1)
Network Analysis Modules
Cisco NAM 2204 Appliance(NAM2204)
1.3.6.1.4.1.9.1.1032
Yes
NA
NA
NA
NA
4.0(1)
Cisco Unified IP Phones 7900 Series
7906 IP Phone
NA
NA
NA
NA
NA
Yes
NA
Cisco Catalyst 2975 Series Switches
Cisco Catalyst 2975 Switch(WS-C2975GS-48PS-L)
1.3.6.1.4.1.9.1.1067
Yes
Yes
NA
NA
12.2(46)EX
Cisco Catalyst 2975 Series Switches
Cisco Catalyst 2975 Switch(WS-C2975GS-48PS-L Stack)
1.3.6.1.4.1.9.1.1068
Yes
Yes
NA
NA
Yes1
12.2(46)EX
Cisco 800 Series Routers
Cisco 892 Integrated Services Router(CISCO892-K9,CISCO892J-K9,CISCO892W-AGN-E-K9,CISCO892W-AGN-P-K9)
1.3.6.1.4.1.9.1.858
Yes
NA
NA
NA
NA
124-22.YB
Cisco 800 Series Routers
Cisco 891 Integrated Services Router(CISCO891-K9,CISCO891W-AGN-A-K9,CISCO891W-AGN-C-K9,CISCO891W-AGN-N-K9)
1.3.6.1.4.1.9.1.857
Yes
NA
NA
NA
NA
124-22.YB
Cisco 3800 Series Integrated Services Routers
CISCO 3845 NOVPN Integrated Services Router(3845-NOVPN )
1.3.6.1.4.1.9.1.1102
Yes
NA
NA
NA
NA
124-22.YB1
Cisco 3800 Series Integrated Services Routers
CISCO 3825 NOVPN Integrated Services Router(3825-NOVPN)
1.3.6.1.4.1.9.1.1103
Yes
NA
NA
NA
NA
124-22.YB1
Cisco ME 3400 Series Ethernet Access Switches
CISCO ME-3400EG-2CS-A
1.3.6.1.4.1.9.1.1007
Yes
Yes
NA
NA
Yes
12.2(44)EY
Cisco ME 3400 Series Ethernet Access Switches
CISCO ME-3400EG-12CS
1.3.6.1.4.1.9.1.1008
Yes
Yes
NA
NA
Yes
12.2(44)EY
Cisco ME 3400 Series Ethernet Access Switches
CISCO ME-3400E-24TS
1.3.6.1.4.1.9.1.1009
Yes
Yes
NA
NA
Yes
12.2(44)EY
Cisco Catalyst 2350 Series Switches
Cisco Catalyst 2350-48TD-S Switch
1.3.6.1.4.1.9.1.1104
Yes
Yes
NA
NA
Yes1
12.2.46-EY
Cisco Catalyst 2960 Series Switches
Cisco Catalyst 2960-8TC-S Compact Switch
1.3.6.1.4.1.9.1.1006
Yes
Yes
NA
NA
Yes
12.2.46-SE
Cisco Catalyst 2960 Series Switches
Cisco Catalyst 2960-48TT-S Switch
1.3.6.1.4.1.9.1.1005
Yes
Yes
NA
NA
Yes
12.2.46-SE
1 IP Phones are supported.
Downloading Campus Manager 5.1.3
You can download the Campus Manager 5.1.3 installer file, cwcm5_1_3_sol.zip, by either:
Or
•
Downloading From Software Center
Downloading From Cisco.com
You can download the updates:
•
From the Software Downloads page
From the Cisco.com home page, Select Products & Solutions > Network Management > All Network Management Products > CiscoWorks Campus Manager > Download Software to access the Software Downloads page.
Or
•
From http://www.cisco.com/pcgi-bin/tablebuild.pl/cw2000-campus
To download the file from Cisco.com:
Step 1
Locate the package file cwcm5_1_3_sol.zip.
Step 2
Right-click the package file.
Depending on your browser, select either Save Link As... or Save Target As... to download the file to a temporary working area of your server.
Downloading From Software Center
To download the file from Software Center:
Step 1
Go to the CiscoWorks homepage and select Common Services > Software Center > Software Update.
The Software Updates page appears.
Step 2
Check the Campus Manager check box in the Products Installed table, and click Select Updates.
The CCO and Proxy Server Credentials page appears.
You are prompted to enter your Cisco.com User Name and Password. If you have configured proxy settings, you are prompted to enter the Proxy Server User credentials.
You can configure your Proxy Server User credentials from the Proxy Server Setup page.
To access the Proxy Server Setup page, go to the CiscoWorks Homepage and select Common Services > Server > Security > Cisco.com Connection Management > Proxy Server Setup.
The Proxy Server Setup page appears. Enter the required information in the page to configure your Proxy Server settings.
Step 3
Enter the required credentials, and click Next.
The Available Images page appears with packages for Solaris (cwcm5_1_3_sol.zip).
Step 4
Select cwcm5_1_3_sol.zip and click Next.
The Destination Location page appears.
Step 5
Enter the location or browse to the location using the Browse button.
Step 6
Click Next.
The Summary page appears. The Summary window displays a summary of your inputs.
Step 7
Click Finish to confirm the download operations.
The package file is downloaded to the directory that you selected, in the folder cm.
Installing Campus Manager 5.1.3
Before you install Campus Manager 5.1.3, make sure your installation environment meets the requirements described in "Hardware and Software Requirements" section.
To install Campus Manager 5.1.3:
Step 1
Log in as root on the system
Step 2
Go to the directory where cwcm5_1_3_sol.zip has been downloaded.
Step 3
Unzip the file to your temporary working area by entering:
# unzip cwcm5_1_3_sol.zip -d/your_temporary_directory
The files are extracted in your_temporary_directory.
Step 4
Go to your_temporary_directory and run the installation setup script by entering:
# ./setup.sh
A prompt appears:
Press Enter to read/browse the following license agreement:Step 5
Press Enter to read the license agreement.
The following message appears at the end of the license agreement:
You must accept this License agreement to proceed with the installation. If you enter N/n, the installation will exit.
Do you accept all the terms of the preceding License agreement?
(y/n) [n]Step 6
You should enter either:
•
y to accept the license agreement and proceed with the installation
Or
•
n to deny and quit the installation.
If you have not installed Common Services 3.2, this message appears:
Install Common Services 3.2 before installing Campus Manager 5.1.3.The installation terminates.
Common Services 3.2 is available as a part of CiscoWorks LMS 3.1.
If you have not installed Campus Manager 5.1, this message appears:
Install Campus Manager 5.1 before installing Campus Manager 5.1.3.The installation terminates.
Campus Manager 5.1 is available as a part of CiscoWorks LMS 3.1.
A detailed list of instructions to install CiscoWorks Common Services 3.2, and Campus Manager 5.1 (a part of CiscoWorks LAN Management Solution 3.1) is available on Cisco.com.
To access this, go to:
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/prod_installation_guides_list.html
After installing Common Services 3.2 and Campus Manager 5.1, resume from Step 4.
The installation program checks whether dependencies and system requirements are met:
•
If there is not enough disk space to install Campus Manager 5.1.1, the installation program displays an error message and stops.
•
If the minimum requirements are not met, the installation program displays a warning message and the following prompt appears:
Do you want to continue the installation? (y/n) [y]:If you enter y, installation continues.
If you enter n, installation aborts.
Step 7
Select whether you want to restart CiscoWorks daemon after installation, when this prompt appears:
Do you want to restart CiscoWorks Daemons at the end of this installation?(y/n) [n]:If you select y, CiscoWorks daemons are restarted after Campus Manager installation is complete.
After you enter y or n, the following prompt appears:
Exiting installation beyond this point might result in system instability Do you want to continue the installation? (y/n) [y]If you enter n, installation aborts.
Step 8
Enter y to complete and quit the installation.
To ensure that the installation is successful, go to Common Services > Software Center > Software Update. Click Campus Manager and ensure that the Patches Installed table displays Campus Manager 5.1.3.
Reinstalling Campus Manager 5.1.3
To reinstall Campus Manager 5.1.3, follow the instructions in the "Installing Campus Manager 5.1.3" section.
Device Pacakages
Cisco's routers and switches are referred to as network devices. Routers and switches must be physically installed in the appropriate chassis and connected to your network (using each specific device's hardware installation guide). A software update that enables Campus Manager to support new features for a particular device is called a device package.
Device Package Updates
Campus Manager provides support for a considerable range of devices by installing device packages. Additional device packages can be added to Campus Manager anytime after the initial product release or installation. When new device packages become available, they are placed on Cisco.com.
Check, http://www.cisco.com/pcgi-bin/tablebuild.pl/cw2000-campus to ensure that you have the latest device release. You can add or update device packages using Software Center. Software Center is a component of Common Services.
For more information on using Software Center, see User Guide for Common Services 3.x.
Known Problems in Campus Manager 5.1.3
Known problems are unexpected behaviors or defects in Campus Manager software releases.
To obtain more information about known problems, access the Cisco Software Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/home.pl. (You will be prompted to log into Cisco.com.)
For a list of known problems in Campus Manager 5.1, see Release Notes for CiscoWorks Campus Manager 5.1 available on Cisco.com (see "Related Documentation" section).
Resolved Problems in Campus Manager 5.1.3
Table 3 lists the resolved problems in Campus Manager 5.1.3.
Frequently Asked Questions
•
How will I know which version of Campus Manager I have installed?
•
Where can I find device support for CiscoView, Device Fault Manager, or Resource Manager Essentials?
•
Where can I find information on the supported devices for Campus Manager 5.1.3?
Q.
How will I know which version of Campus Manager I have installed?
A.
To check the version of Campus Manager installed on your system, from the CiscoWorks desktop, select Common Services > Software Center > Software Update > Campus Manager.
The Patches Installed table displays the installed version of the applications.
If Patches Installed Table Displays Campus Manager Version Installed is...Campus Manager - 5.1.3
5.1.3
Q.
I do not want support for all the devices that you have supported in Campus Manager 5.1.3. Can I select only the devices I want?
A.
No. The present installation framework does not support this feature. Even if you do not have all the supported devices, installing Campus Manager 5.1.3 will not adversely affect your network.
Q.
Where can I find device support for CiscoView, Device Fault Manager, or Resource Manager Essentials?
A.
The device support packages are available at the following locations:
Application Location is...CiscoView
http://www.cisco.com/pcgi-bin/Software/CiscoView/
cvplanner.cgiDevice Fault Manager
Resource Manager Essentials
Q.
Where can I find information on the supported devices for Campus Manager 5.1.3?
A.
You can find the latest information on supported devices for Campus Manager 5.1.3, see Supported Devices Tables for LMS 3.1 on Cisco.com.
To access this, either:
–
Go to the Cisco.com home page and select Products & Solutions > Network Management > All Network Management Products > CiscoWorks Campus Manager.
–
From the Technical Documentation & Tools section, select General Information > Compatibilty Information > Supported Devices Table for LMS 3.1
Or
–
Go to
–
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_device_support_tables_list.html
Note
The Supported Devices Table for LMS 3.1 contains the information on device support for Campus Manager 5.1.3.
Feedback
