Installation and Setup Guide for Campus Manager 3.2 on Windows 2000
Installing Campus Manager
Download this chapter
Installing Campus ManagerInstalling Campus Manager
Download the complete book
Installation and Setup Guide for Campus Manager 3.2 on Windows 2000Installation and Setup Guide for Campus Manager 3.2 on Windows 2000 (PDF - 930 KB)
give_us_feedback

Table Of Contents

Installing Campus Manager

Installation Overview

Performing a New Installation

Installation Notes

Running the Installation Program—New Installation

Performing an Upgrade Installation

Installation Notes

Running the Installation Program—Upgrade or Reinstallation

Upgrading Saved Views From Topology Services

Importing Data After Installation

Understanding the Data Conversion

Converting Campus Data

Converting Campus 3.1 Data

Importing Data Manually from Campus Manager 3.1

Upgrading Saved Views From Topology Services

Uninstalling Campus Manager


Installing Campus Manager

This chapter describes how to install, upgrade, uninstall, and reinstall Campus Manager (Campus). You must install CiscoWorks2000 CD One, 5th Edition before you can install Campus Manager. See Installation and Setup Guide for CD One on Windows 2000.

Note Ensure that SSL (Secure Socket Layer) is disabled in the Ciscoworks 2000 server before you install Campus Manager.

This chapter contains:

•Installation Overview

•Performing a New Installation

•Performing an Upgrade Installation

•Importing Data After Installation

•Uninstalling Campus Manager

Installation Overview

Table 2-1 is an overview of the Campus Manager installation tasks. It contains references to more detailed information about each task.

Table 2-1 Installing Campus Overview 

Task
Steps
References

1. Prepare to install Campus.

Verify that server requirements are met.

"Server Requirements" section

2. Install Campus.

Run the installation program.

"Performing a New Installation" section

or

"Performing an Upgrade Installation" section

3. Verify and troubleshoot installation.

a. Verify the correct files and directories are installed.

"Understanding Installation Error Messages" section

b. Analyze installation error messages.

"Understanding Installation Error Messages" section

4. Set up Campus Manager

Prepare the system for Campus applications and set up the applications.

"Preparing to Use Campus Manager"


Performing a New Installation

This section describes a new Campus Manager installation. If you are upgrading from Campus Manager 3.1, see the "Performing an Upgrade Installation" section.

Installation Notes

You must install CiscoWorks2000 CD One, 5th Edition before installing Campus. See Installation and Setup Guide for CD One on Windows 2000.

Campus is installed in the default directory C:\Program Files\CSCOpx. If you had selected another directory during the CiscoWorks2000 CD One installation, Campus is installed in that directory.

You might also see warnings that the installation system is running out of disk space. You can chose to free space on the system and click Yes to continue, or click No to exit the installation.

Running the Installation Program—New Installation

To install Campus:

Step 1 Insert the Campus CD-ROM into a CD-ROM drive.

The Installer window opens. Continue to Step 4.

Step 2 If the Installer window does not open, select Start > Run. The Run dialog box opens.

Step 3 In the Open field, enter: 

drive:\setup.exe

where drive is the CD-ROM drive letter.

Note Campus is installed in the same location as CiscoWorks2000 CD One. The default is C:\Program Files\CSCOpx.

The Installer window opens.

Step 4 Click Install to continue or Cancel to stop.

If you click Install, the Welcome window opens.

Step 5 Click Next to continue.

The Start Copying Files dialog box opens, displaying the target directory and program folder. The target directory is the directory in which you installed CiscoWorks2000 CD One.

Step 6 Click Next to continue.

When the installation is complete, the Setup Complete dialog box opens.

Step 7 Click Finish. The CiscoWorks2000 Server is running.

If errors occurred during installation, check the installation log file in the root directory on the drive where the operating system is installed. The default is C:\cw2000_in002.log. Each installation creates a new installation log that is saved as a different file. For example, the second time you install Campus, the installation log is saved as C:\cw2000_in003.log. The default installation log from the CD One installation is C:\cw2000_in001.log. For other troubleshooting information, see "Troubleshooting the Installation."

After the installation completes, do one of the following:

•If you have data from Campus Manager 3.1 to import into
Campus Manager 3.2, refer to the "Understanding the Data Conversion" section.

•If you do not have data to import, continue to "Preparing to Use Campus Manager."

For more information about the ANI database, see the "Converting Campus Data" section.

Performing an Upgrade Installation

You can upgrade to Campus Manager 3.2 from Campus Manager 3.1. For versions earlier than version 3.1, upgrade to Campus Manager 3.1 before upgrading to Campus Manager 3.2.

Campus requires CiscoWorks2000 CD One, 5th Edition, which is the foundation for the CiscoWorks2000 Family of Products; it includes the CiscoWorks2000 Server and the ANI Server. When you install CiscoWorks2000 CD One, the previous version of Campus is removed and its database is preserved.

When you install Campus Manager 3.2, certain data from the previous installation is preserved. This data includes:

•SNMP community strings

•User Tracking manually entered data fields

•Seed devices

•User preferences

If you are upgrading from Campus Manager 3.1, Topology Services saves certain views during installation. These views include the following:

•Layer 2 View

•Unconnected Device View

•LAN Edge View.

You must upgrade to CiscoWorks2000 CD One, 5th Edition before installing or upgrading to Campus 3.2.

Note Uninstalling Campus deletes the ANI database.

For more information about the ANI database, see the "Understanding the Data Conversion" section.

Installation Notes

You must install CiscoWorks2000 CD One, 5th Edition before installing Campus. See Installation and Setup Guide for CD One on Windows 2000.

Campus is installed in the default directory C:\Program Files\CSCOpx. If you selected another directory during the CiscoWorks2000 CD One installation, Campus Manager is installed in that directory.

You might also see warnings that the target system is running out of disk space. You can chose to free space on the system and click Yes to continue, or click No to exit the installation.

Running the Installation Program—Upgrade or Reinstallation

Use this procedure if you allowed the CD One installation program to save the previous data and remove the previous software.

If you installed CD One on a clean system, follow the procedure for a new installation in the "Performing a New Installation" section.

After installing Campus, you can manually import your existing database to the system on which CiscoWorks2000 is installed if it was not automatically imported during installation. See the "Importing Data After Installation" section.

To run the installation program for an upgrade:

Step 1 Insert the Campus CD-ROM into a CD-ROM drive.

The Installer window opens. Continue to Step 4.

Step 2 If the Installer window does not open, select Start > Run.

The Run dialog box opens. Continue to Step 3.

Step 3 In the Open field, enter: 

drive:\setup.exe

where drive is the CD-ROM drive letter.

Note Campus is installed in the same location as CiscoWorks2000 CD One. The default is C:\Program Files\CSCOpx.

The Installer window opens.

Step 4 Click Install to continue or Cancel to stop.

If you click Install, the Welcome window opens.

Step 5 Click Next to continue.

The Start Copying Files dialog box opens, displaying the target directory and program folder. The target directory is the directory in which you installed CiscoWorks2000 CD One.

Step 6 Click Next to continue.

The installation program converts your database but does not remove the original database. The original database is preserved and remains until you manually remove it.

If there is not enough disk space in the location to convert and import the archived database, an information message appears. If you have data you want to save and upgrade but not enough disk space, do one of the following:

•Free up enough disk space to be able to save and upgrade data, then continue with the installation process.

•Install CD One, 5th Edition, and Campus on a different machine, then remotely import the data. Refer to the "Importing Data After Installation" section.

When the installation is complete, the Setup Complete dialog box opens.

Step 7 Click Finish.

The CiscoWorks2000 Server is running.

If errors occurred during installation, check the installation log file in the root directory on the drive where the operating system is installed. The default is C:\cw2000_in002.log. Each installation creates a new installation log that is saved as a different file.

For example, the second time you install Campus, the installation log is saved as C:\cw2000_in003.log. The default installation log from the CD One installation is C:\cw2000_in001.log. For other troubleshooting information, refer to "Troubleshooting the Installation."

After the installation completes, choose one of the following:

•If you installed Campus on a different system and have data to import, you can import the database remotely. Refer to the "Importing Data After Installation" section section for more information.

•If your data is already converted or you do not want to import the old data, continue to "Preparing to Use Campus Manager."

After Campus is installed, Topology Services allows you to either convert the saved views into the new Campus Manager 3.1 format or directly use the default views generated by Campus Manager 3.1. See "Upgrading Saved Views From Topology Services" section for more information.

Upgrading Saved Views From Topology Services

Use the following procedure to upgrade saved topology views to the new Campus Manager 3.2 format. If you do not want to upgrade to the new format but want to use the default views generated by Campus Manager 3.2, selecting Layer 2 View, LAN Edge View, or Unconnected Devices View from the side panel in Topology Services displays.

Step 1 Start Topology Services from the desktop.

Step 2 Select File > Upgrade View Layouts.

Step 3 Select the view you want to upgrade.

Step 4 Click Upgrade to upgrade the selected view.

Topology Services upgrades the selected view in the Campus Manager 3.2 format.

Step 5 To display this view, select the corresponding view from the side panel in Topology Services.

Note The upgraded view might not be formatted exactly the same as the previous version of the view because of the new features in Campus Manager 3.2.

Importing Data After Installation

This section describes how to manually import data from previous versions of Campus. You might need to import manually if you performed a new installation of Campus but have data from previous versions of the software on a different system.

Understanding the Data Conversion

Data can be converted from Campus Manager 3.1 format to Campus Manager 3.2 format.

Converting Campus Data

Campus Manger accesses the ANI database for critical network information. During an upgrade from Campus Manager 3.1 the database is saved. Data from the saved database can be converted to Campus Manager 3.2 format for immediate use.

The CiscoWorks2000 CD One installation, which is required for the Campus Manager installation, automatically saves your old database. When you install Campus Manager, the saved database is imported into the new file, ani.db. After you import your database into Campus Manager 3.2, the old ANI database, called ani.db, remains in the directory you indicated during the CD One install until you remove it.

For more information about the ANI database, see the ANI online help or User Guide for CiscoWorks2000 Server.

Converting Campus 3.1 Data

The community strings are upgraded from the old anisnmp.conf file to the updated anisnmp.conf file. Some critical properties from the old ANIServer.properties file are updated in the new ANIServer.properties file.

The User Tracking data is extracted from the old ani.db file and saved as rigel_ut.txt. This data is found and processed during the first User Tracking discovery.

Topology Services saves topology views from Campus Manager 3.1. The following views are saved:

•Layer 2 View

•Unconnected Device View

•LAN Edge View

Importing Data Manually from Campus Manager 3.1

Follow this procedure to remotely import saved data from Campus Manager 3.1.

Step 1 Stop the daemon manager on the local machine on which the previous version of Campus Manager is installed. For more information on stopping the daemon manager, see Installation and Setup Guide for CD One on Windows 2000.

Step 2 Insert the CD One CD-ROM into a CD-ROM drive.

The Installer window opens. Click Cancel.

Step 3 Select Start > Run. The Run dialog box opens.

Step 4 To save CiscoWorks200 data, run: 

drive:\perl export_cdone.pl

where drive is the CD-ROM drive letter.

Step 5 Insert the Campus CD-ROM into the CD-ROM drive.

Step 6 To save Campus data, run: 

drive:\perl export_cm.pl

where drive is the CD-ROM drive letter.

Step 7 Copy all subdirectories except the scripts directory under C:\Program Files\CSCOpx\rigel\ from the local machine to C:\Program Files\CSCOpx\rigel\ on the remote machine.

Step 8 Start the daemon manager on the local machine. For more information, refer to Installation and Setup Guide for CD One on Windows 2000.

Step 9 Stop the daemon manager on the remote machine. For more information on stopping the daemon manager, refer to Installation and Setup Guide for CD One on Windows 2000.

Step 10 To copy CiscoWorks2000 data to corresponding CD One, 5th Edition, directories on the remote machine, enter: 

C: cd \Program Files\CSCOpx\rigel\scripts

C:\Program Files\CSCOpx\bin\perl import_cdone.pl.

Step 11 A prompt appears: 

Are you sure you want to import CiscoWorks2000 data (y/n)? [n]

Enter y to import and n to cancel.

Step 12 To copy Campus data to corresponding Campus Manager 3.2 directories on the remote machine, enter: 

C: cd \Program Files\CSCOpx\rigel\scripts

C:\Program Files\CSCOpx\bin\perl import_cm.pl

Step 13 A prompt appears: 

Are you sure you want to import Campus data (y/n)? [n]

Enter y to import and n to cancel.

Step 14 Start the daemon manager on the remote machine. See Installation and Setup Guide for CD One on Windows 2000 for more information.

After the data is imported, Topology Services allows you to either convert the saved views into the new Campus Manager 3.2 format or directly use the default views generated by Campus Manager 3.2. See the "Upgrading Saved Views From Topology Services" section for more information.

Upgrading Saved Views From Topology Services

Use the following procedure to upgrade saved topology views to the new Campus Manager 3.2 format. If you do not want to upgrade to the new format but want to use the default views generated by Campus Manager 3.2, select Layer 2 View, LAN Edge View, or Unconnected Devices View from the side panel in Topology Services.

Step 1 Start Topology Services from the desktop.

Step 2 Select File > Upgrade View Layouts.

Step 3 Select the view you want to upgrade.

Step 4 Click Upgrade to upgrade the selected view.

Topology Services upgrades the selected view in the Campus Manager 3.2 format.

Step 5 To display this view, select the corresponding view from the side panel in Topology Services.

Note The upgraded view might not be formatted exactly the same as the previous version of the view because of the new features in Campus Manager 3.2.

Uninstalling Campus Manager

The uninstall program removes Campus files and settings. Uninstallation allows you to remove only Campus or remove CiscoWorks2000 CD One as well.

Caution You must use the Campus Manager uninstallation program to remove the product. If you try to remove Campus or its components manually, you could damage your system.
Caution Uninstalling Campus Manager deletes the ANI database. To upgrade and convert the database, see the "Performing an Upgrade Installation" section.

To remove Campus or other major components:

Step 1 Select Start > Programs> CiscoWorks2000 > Uninstall CiscoWorks2000.

The Uninstallation dialog box appears, displaying all of the installed components.

Step 2 Deselect the components you do not want to remove or click Uninstall All.

Step 3 Click Next to begin uninstalling Campus.

A dialog box opens, listing the components selected for uninstallation.

Step 4 Click Next.

Messages about the uninstall process appear and the uninstallation finishes.

To reinstall Campus, follow the instructions in the "Performing an Upgrade Installation" section.