Table Of Contents
This chapter describes the factors that you should consider before installing Campus Manager (Campus) on a Solaris system.
This chapter contains:
Campus, a member of the CiscoWorks2000 Family of Products, is a suite of web-based network management tools that enables administrators to obtain various types of graphical views of their network topology and end-user information. Campus Manager is based on a client/server architecture that connects multiple web-based clients to a server on the network.
The CiscoWorks2000 Server supplies tools and services to the Campus Manager applications, including the Asynchronous Networks Interface (ANI) Server. The ANI Server discovers information about network devices and saves it in the ANI database for other applications, including the Campus applications, to access. For more information, refer to Getting Started with the CiscoWorks2000 Server and the CiscoWorks2000 Server and ANI Server online help.
The Campus Manager applications are:
•Path Analysis—View the actual path packets take between end nodes on your network.
•User Tracking—Locate and display data about users and hosts in your network.
•Topology Services—Discover, view, and monitor the physical and logical services on your network.
•VLAN Port Assignment—View port information, configure VLANs on a trunk, and move ports between VLANs on your network.
•Discrepancy Reports—Discover and view physical and logical discrepancies in your network.
Campus Upgrade Paths
You can upgrade to Campus Manager 3.1 from CWSI Campus 2.4, Campus Manager 3.0, or Campus Manager 3.0.1. For versions of CWSI Campus earlier than version 2.4, uninstall the application or upgrade to CWSI Campus 2.4 before upgrading to Campus 3.1.
Campus requires CiscoWorks2000 CD One, 4th Edition, which is the foundation for the CiscoWorks2000 Family of Products; it includes the CiscoWorks2000 Server and the ANI Server. When you install CiscoWorks2000 CD One, the previous version of CWSI Campus is removed and its database is preserved. When you install Campus Manager 3.1, certain data from the preserved database is converted to Campus Manager 3.1 format. This data includes:
•SNMP community strings
•User Tracking manually entered fields
If you are upgrading from Campus Manager 3.0 or Campus Manager 3.0.1, Topology Services saves certain views during installation. These views include the following:
•Layer 2 View
•Unconnected Device View
•LAN Edge View
For versions of CiscoWorks2000 CD One earlier than the 4th Edition, you must upgrade to CiscoWorks2000 CD One, 4th Edition before installing or upgrading to Campus 3.1.
Caution Uninstalling Campus deletes the ANI database.
This section describes the system requirements and recommendations for CiscoWorks2000 CD One and Campus Manager.
The minimum system requirements for CiscoWorks2000 CD One and Campus Manager are shown in Table 1-1.
Table 1-1 Server System Requirements Summary
Requirement Type Minimum Requirement1
•Sparc Ultra 10
Available drive space2
•4 GB on the partition on which you install the product (the default is /opt)3
•Swap space equal to double the amount of memory (RAM). For example, if your system has 256 MB of RAM, you need 512 MB of swap space.
Must be on a swap partition.
Solaris 2.6 or 2.7 with English or Japanese files.4
Additional required software
CiscoWorks2000 CD One, 4th Edition must be installed before installing Campus. If you installed a version of CiscoWorks2000 CD One earlier than the 4th Edition, upgrade before installing Campus Manager. Refer to Installing and Setting Up CiscoWorks2000 CD One, 4th Edition on Solaris.
1 If other applications are installed, or the number of devices on your network exceeds 500, the requirements might be greater.
3 Campus must be installed in the same directory as CiscoWorks2000 CD One.
4 Patch 106292-05 must not be installed.
Checking Required Disk Space
To verify the amount of available disk space in each of the specified partitions and directories, enter:# df -k directory
where directory is the partition or directory for which you want to check the available disk space.
Maximum Recommended Load
The maximum recommended load on servers configured with the minimum server requirements shown in Table 1-1 is 500 Cisco devices and one client at a time.
If other network management applications are installed on your server, additional resources might be required.
If your network has more than 500 Cisco devices, the following minimum requirements are recommended:
•A Sparc Ultra 60 processor
•512 Mb of memory (RAM)
•1 GB of swap space
The minimum client system requirements for CiscoWorks2000 CD One and Campus Manager are shown in Table 1-2. The maximum recommended load on clients configured with the minimum requirements shown in Table 1-2 is 1000 Cisco devices.
Note Before you can access Campus from a client system, the system must be properly configured. For information about configuring clients, refer to Installing and Setting Up CiscoWorks2000 CD One, 4th Edition.
For information about supported devices, refer to Release Notes for Campus Manager on Solaris.