Hierarchical Navigation



Table Of Contents


Product Overview

Campus Upgrade Paths

Server Requirements

Checking Required Disk Space

Maximum Recommended Load

Server Recommendations

Client Requirements

Supported Devices


This chapter describes the factors that you should consider before installing Campus Manager (Campus) 3.0 on an AIX system.

This chapter contains:

Product Overview

Campus Upgrade Paths

Server Requirements

Client Requirements

Supported Devices

Product Overview

Campus, a member of the CiscoWorks2000 Family of Products, is a suite of web-based network management tools that enable administrators to obtain various types of graphical views of their network topology and end-user information. Campus Manager is based on a client/server architecture that connects multiple web-based clients to a server on the network.

The CiscoWorks2000 Server supplies tools and services to the Campus Manager applications, including the Asynchronous NetworkInterface (ANI) Server. The ANI Server discovers information about network devices and saves it in the ANI database for other applications, including the Campus applications, to access. For more information, refer to Getting Started with the CiscoWorks2000 Server and the CiscoWorks2000 Server and ANI Server online help.

The Campus Manager applications are:

Path Analysis—View the actual path packets are taking between end nodes on your network.

User Tracking—Locate and display data about users and hosts in your network.

Topology Services—Discover, view, and monitor the physical and logical services on your network.

Campus Upgrade Paths

You can upgrade to Campus Manager 3.0 from CWSI Campus 2.2, 2.3, or 2.4. For versions of CWSI Campus earlier than version 2.2, uninstall the application or upgrade to CWSI Campus 2.2 before upgrading to Campus 3.0.

Campus requires CiscoWorks2000 CD One Second Edition, which is the foundation for the CiscoWorks2000 Family of Products; it includes the CiscoWorks2000 Server and the ANI Server. When you install CiscoWorks2000 CD One, the previous version of CWSI Campus is removed and its database is preserved. When you install Campus Manager 3.0, the preserved database is converted to Campus Manager 3.0 format.You must upgrade to CiscoWorks2000 CD One Second Edition before installing or upgrading to Campus 3.0.

Caution Uninstalling Campus deletes the ANI database

Server Requirements

This section describes the system requirements and recommendations for CiscoWorks2000 CD One and Campus Manager 3.0.

The minimum system requirements for CiscoWorks2000 CD One and Campus Manager are shown in Table 1-1.

Table 1-1 Server System Requirements Summary

Requirement Type
Minimum Requirement1

System hardware

RS6000 PowerPC, Model 604e, 233 Mhz

17-inch color monitor

CD-ROM drive

Memory (RAM)

256 MB minimum

Available drive space2

4 GB on the partition on which you install the product (the default is /usr) 3

Swap space equal to double the amount of memory (RAM). For example, if your system has 256 MB of RAM, you need 512 MB of swap space.

/tmp directory

Must be on a swap partition

/var directory

Space for downloaded Software Management files

System software

AIX 4.3.3

Additional software

CiscoWorks2000 CD One must be installed before you install Campus. Refer to Installing and Setting Up CiscoWorks2000 CD One on AIX.

1 If other applications are installed, or the number of devices on your network exceeds 500, the requirements might be greater.

2 For information about verifying disk space, refer to the "Checking Required Disk Space" section

3 Campus must be installed in the same directory as CiscoWorks2000 CD One.

Checking Required Disk Space

To verify the amount of available disk space in each of the specified partitions and directories, enter:

# df -k directory

where directory is the partition or directory for which you want to check the available disk space.

Maximum Recommended Load

The maximum recommended load on servers configured with the minimum server requirements shown in Table 1-1 is 500 Cisco devices and one client at a time.

If other network management applications are installed on your server, additional resources might be required.

Server Recommendations

If your network has more than 500 Cisco devices, the following minimum requirements are recommended:

RS6000 PowerPC Model 150, 375 Mhz

512 Mb of memory (RAM)

1 GB of swap space

If other network management applications are installed on your server, additional resources will be required.

Client Requirements

The minimum client system requirements for CiscoWorks2000 CD One and Campus Manager are shown in Table 1-2. The maximum recommended load on clients configured with the minimum requirements shown in Table 1-2 is 950 Cisco devices.

Note Before you can access Campus from a client system, the system must be properly configured. For information about configuring clients, refer to Installing and Setting Up CiscoWorks2000 CD One on AIX.

Table 1-2 Client System Requirements Summary

Requirement Type 
Minimum Requirement 

System Software and Hardware

Client system:

IBM workstation running AIX 4.3.3

IBM PC-compatible computer with 300 MHz Pentium processor running Windows NT 4.0 workstation or server, Windows 95, or Windows 98

Solaris SPARC station or Sun Ultra 10 running
Solaris 2.5.1, 2.6, or 2.7

HP-UX workstation running HP-UX 10.20 or 11.0

Color monitor with video card set to at least 256 colors

Memory (RAM)

128 MB


Netscape Navigator 4.61 or 4.7

Microsoft Internet Explorer 5.0 or 5.01
Java Virtual Machine (JVM) version or later
(Windows NT, Windows95/98)

Supported Devices

For information about supported devices, refer to Release Notes for Campus Manager 3.0 on AIX.