Table Of Contents

Notification MIB

Notification MIB

---

The CISCO-EPM-NOTIFICATION-MIB specifies the trap message format Cisco Unified Operations Manager (Operations Manager) uses to generate SNMP traps when an alert occurs. The trap includes the attributes of the alert and the events that caused the alert.

This topic includes the following information:

•MIB Definition

•cenAlarmEntry Object-Type—Definitions for Selected Attributes

•cenUserMessage1 Object-Type—Attribute with Partition Information

MIB Definition

CISCO-EPM-NOTIFICATION-MIB DEFINITIONS ::= BEGIN

 IMPORTS

     MODULE-IDENTITY,

     NOTIFICATION-TYPE,

     Integer32,

     Unsigned32,

     OBJECT-TYPE        FROM SNMPv2-SMI

     MODULE-COMPLIANCE,

     NOTIFICATION-GROUP,

     OBJECT-GROUP       FROM SNMPv2-CONF

     TimeStamp          FROM SNMPv2-TC

     SnmpAdminString    FROM SNMP-FRAMEWORK-MIB

     InetAddressType,

     InetAddress        FROM INET-ADDRESS-MIB

     ciscoMgmt          FROM CISCO-SMI

     ;

 ciscoEpmNotificationMIB MODULE-IDENTITY

     LAST-UPDATED   "200406070000Z"

     ORGANIZATION   "Cisco Systems, Inc."

     CONTACT-INFO   "Cisco Systems

                     Customer Service

                     Postal: 170 W Tasman Drive

                     San Jose, CA 95134

                     Tel: +1 800 553-NETS

                     E-mail: tac@cisco.com"

     DESCRIPTION

     "Notifications directly from hardware and software and processed

     notifications from various management applications can be further

     processed and forwarded by still other management applications to 

     indicate the status of devices and software (managed objects).

     The status of these managed objects can be reported by traps.

     The CISCO-EPM-NOTIFICATION-MIB contains the trap structure which 

     carries the identity and status info of the managed object as

     analyzed by such an event processor. It is not possible for

     receivers of these traps to query the mib objects.

     A unique but optional feature of the application generating the 

     trap defined in this mib is the ability to contain multiple 

     partitions in the same system running the application. A 

     'Partition' is a logical grouping of a set of managed devices. 

     These devices can belong to only one partition at any given 

     time. The trap structure will contain information on the exact 

     partition number and the partition name of the device where it 

     resides.

     The need for trap generation is to enable multiple management

     applications in the network to have a consolidated view of the

     whole network of Cisco and non-Cisco devices."

     REVISION     "200406070000Z" 

     DESCRIPTION

     "Updated the cenAlarmEntry to include new attributes. The new

     attributes carries information that adds more value to the already

     existing trap structure.

     The Management application computes events for a device via 

     polling snmp mib objects on the device and/or by listening to 

     SNMP Traps. Multiple events on a single device roll up into what 

     is called an Alert - there can be only one alert for a given 

     device at any given time. The objects contained in the 

     cenAlarmEntry are the same for both Alert and Event based 

     notification. The attribute cenAlarmMode added in this revision

     of the mib can be used to distinguish between the Alert based and 

     event based notification.

     In case of event based notification, the cenAlertID would contain 

     the alert id, as computed by the management system, to which the 

     generated event has been rolled up. 

     Traps generated from systems that support mutiple Partition, the 

     cenPartitionNumber and cenPartitionName attributes will carry the

     exact partition details of the device for which the trap is 

     generated.

     Through the management application user interface, the user can 

     customize few attributes of the trap structure. Two attributes 

     included in this mib revision that allows the user to customize 

     each trap sent out are cenCustomerIdentification and 

     cenCustomerRevision.

     ciscoEpmNotificationObjectsGroup, ciscoEpmNotificationAlarm, and

     ciscoEpmNotificationMIBCompliance have been deprecated in this 

     revision.

     ciscoEpmNotificationAlarmRev1,

     ciscoEpmNotificationAlarmGroupRev1,

     ciscoEpmNotificationMIBComplianceRev1, 

     and ciscoEpmNotificationObjectsGroupRev1 have been newly created

     in this revision."

     REVISION     "200308210000Z" 

     DESCRIPTION

     "Included imports for Integer32, Unsigned32, and 

     NOTIFICATION-GROUP."

     REVISION     "200207281420Z"

     DESCRIPTION

     "Initial version of this MIB."

     ::= { ciscoMgmt 311 }

 -- MIB Object Definitions

 ciscoEpmNotificationMIBNotifs  OBJECT IDENTIFIER 

                                 ::= { ciscoEpmNotificationMIB 0 }

 ciscoEpmNotificationMIBObjects OBJECT IDENTIFIER 

                                 ::= { ciscoEpmNotificationMIB 1 }

 ciscoEpmNotificationMIBConform OBJECT IDENTIFIER 

                                 ::= { ciscoEpmNotificationMIB 2 }

 cenAlarmData                   OBJECT IDENTIFIER 

                                 ::= { ciscoEpmNotificationMIBObjects 1}

 cenAlarmTableMaxLength    OBJECT-TYPE

       SYNTAX              Unsigned32 ( 1..4294967295 )

       MAX-ACCESS          read-write

       STATUS              current

       DESCRIPTION

       "Maximum number of entries permissible in the cenAlarmTable."

       DEFVAL { 1 }

       ::= { cenAlarmData 1 }

 cenAlarmTable             OBJECT-TYPE

       SYNTAX              SEQUENCE OF CenAlarmEntry

       MAX-ACCESS          not-accessible

       STATUS              current

       DESCRIPTION

       "A table containing the device identification and 

       alarm value. The maximum number of entries permissible 

       in this table is defined by cenAlarmTableMaxLength. When 

       the number of entries in the table reaches the maximum 

       limit, the next entry would replace the oldest existing 

       entry in the table."

       ::= { cenAlarmData 2 }       

 cenAlarmEntry          OBJECT-TYPE

       SYNTAX           CenAlarmEntry 

       MAX-ACCESS       not-accessible

       STATUS           current

       DESCRIPTION

       "The information regarding a single device status alarm.

       An entry is created when an alarm is processed."

       INDEX            { cenAlarmIndex }

       ::= { cenAlarmTable 1 }   

 CenAlarmEntry ::=

         SEQUENCE  {

            cenAlarmIndex                       Unsigned32,

            cenAlarmVersion                     SnmpAdminString,

            cenAlarmTimestamp                   TimeStamp,

            cenAlarmUpdatedTimestamp            TimeStamp,

            cenAlarmInstanceID                  SnmpAdminString,

            cenAlarmStatus                      Integer32,

            cenAlarmStatusDefinition            SnmpAdminString,

            cenAlarmType                        INTEGER,

            cenAlarmCategory                    Integer32,

            cenAlarmCategoryDefinition          SnmpAdminString,

            cenAlarmServerAddressType           InetAddressType,

            cenAlarmServerAddress               InetAddress,

            cenAlarmManagedObjectClass          SnmpAdminString,

            cenAlarmManagedObjectAddressType    InetAddressType,

            cenAlarmManagedObjectAddress        InetAddress,

            cenAlarmDescription                 OCTET STRING,

            cenAlarmSeverity                    Integer32,

            cenAlarmSeverityDefinition          SnmpAdminString,

            cenAlarmTriageValue                 Integer32,

            cenEventIDList                      OCTET STRING,

            cenUserMessage1                     SnmpAdminString,

            cenUserMessage2                     SnmpAdminString,

            cenUserMessage3                     SnmpAdminString,

            cenAlarmMode                        INTEGER,

            cenPartitionNumber                  Unsigned32,

            cenPartitionName                    SnmpAdminString,

            cenCustomerIdentification           SnmpAdminString,

            cenCustomerRevision                 SnmpAdminString,

            cenAlertID                          SnmpAdminString

          }

 -- Alarm attributes 

 cenAlarmIndex      OBJECT-TYPE

       SYNTAX       Unsigned32 (1..4294967295)

       MAX-ACCESS   not-accessible

       STATUS       current

       DESCRIPTION

       "A monotonically increasing integer for the sole 

       purpose of indexing the attributes in 

       ciscoEpmNotificationMIBObjects. When the maximum value is 

       reached, this value wraps back to 1."

       ::= { cenAlarmEntry 1 }

 cenAlarmVersion      OBJECT-TYPE

         SYNTAX       SnmpAdminString (SIZE(1..16))

         MAX-ACCESS   read-only

         STATUS       current

         DESCRIPTION

         "The release version of this MIB. The version string will

         be of the form <major version>.<minorversion>."

         ::= { cenAlarmEntry 2 }

 cenAlarmTimestamp      OBJECT-TYPE

         SYNTAX         TimeStamp 

         MAX-ACCESS     read-only

         STATUS         current

         DESCRIPTION

         "The time when the alarm was raised."

         ::= { cenAlarmEntry 3 }

 cenAlarmUpdatedTimestamp      OBJECT-TYPE

         SYNTAX                TimeStamp 

         MAX-ACCESS            read-only

         STATUS                current

         DESCRIPTION

         "Alarms persist over time and can have their field(s) 

         change values. The last time a field(s) changed, this

         alarm is updated. The updated time denotes this time. 

         Each alarm is identified by the unique alarm instance 

         id, cenAlarmInstanceID."

         ::= { cenAlarmEntry 4 }

 cenAlarmInstanceID      OBJECT-TYPE

         SYNTAX          SnmpAdminString (SIZE(1..20))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "The Unique Alarm Instance ID."

         ::= { cenAlarmEntry 5 }

 cenAlarmStatus          OBJECT-TYPE

         SYNTAX          Integer32 (1..250)

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "The alarm status indicates the status of the alarm 

         in integer value."

         ::= { cenAlarmEntry 6 }

 cenAlarmStatusDefinition      OBJECT-TYPE

         SYNTAX                SnmpAdminString (SIZE(1..255))

         MAX-ACCESS            read-only

         STATUS                current

         DESCRIPTION

         "The short description of the status of the alarm.

         The string is formatted in 

         '<integer>,<alarmStatus description>' tuples. The <integer>

         value is the same value that the 'cenAlarmStatus' 

         attribute holds. <alarmStatus description> contains one line

         description of the alarm status generated."

         ::= { cenAlarmEntry 7 }

 cenAlarmType            OBJECT-TYPE

         SYNTAX          INTEGER  {

               unknown(1),

               direct(2),

               indirect(3),

               mixed(4)

         }

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "unknown:  When the value for this attribute could not be 

                    determined.       

          direct:   Denotes an alarm generated by a set of events where 

                    all events are reported by an observation(s) of a 

                    managed object. 

          indirect: Denotes an alarm generated by a set of events where 

                    all events were deduced or inferred by the status of 

                    managed objects as determined by the network 

                    management system. 

          mixed:    Denotes an alarm generated by a set of events which 

                    were either direct or indirect."

         ::= { cenAlarmEntry 8 }

 cenAlarmCategory        OBJECT-TYPE

         SYNTAX          Integer32 (1..250)

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "The category of the alarm generated represented in 

         integer value."

         ::= { cenAlarmEntry 9 }

 cenAlarmCategoryDefinition    OBJECT-TYPE

         SYNTAX                SnmpAdminString (SIZE(1..255))

         MAX-ACCESS            read-only

         STATUS                current

         DESCRIPTION

         "The short description of the category of the alarm 

         generated. The String is formatted in 

         '<integer>,<alarmCategory description>' tuples. The <integer>

         value is the same value that the 'cenAlarmCategory' 

         attribute holds. <alarmCategory description> contains one 

         line description of the alarm category generated."

         ::= { cenAlarmEntry 10 }

 cenAlarmServerAddressType   OBJECT-TYPE

         SYNTAX              InetAddressType

         MAX-ACCESS          read-only

         STATUS              current

         DESCRIPTION

         "The type of Internet address by which the server 

         is reachable. The Server is the server 

         that is generating this trap."

         ::= { cenAlarmEntry 11 }

 cenAlarmServerAddress       OBJECT-TYPE

         SYNTAX              InetAddress

         MAX-ACCESS          read-only

         STATUS              current

         DESCRIPTION

         "The IP Address or the DNS name of the Management 

         Server that raised this alarm to be notified."

         ::= { cenAlarmEntry 12 }

 cenAlarmManagedObjectClass    OBJECT-TYPE

         SYNTAX                SnmpAdminString (SIZE(1..255))

         MAX-ACCESS            read-only

         STATUS                current

         DESCRIPTION

         "The class of the managed object for which this

         alarm was  generated. For example, Router, Switch, 

         GateKeeper and VoicePort."

         ::= { cenAlarmEntry  13 }

 cenAlarmManagedObjectAddressType   OBJECT-TYPE

         SYNTAX                     InetAddressType

         MAX-ACCESS                 read-only

         STATUS                     current

         DESCRIPTION

         "The type of Internet address by which the managed 

         object is reachable."

         ::= { cenAlarmEntry 14 }

 cenAlarmManagedObjectAddress       OBJECT-TYPE

         SYNTAX                     InetAddress 

         MAX-ACCESS                 read-only

         STATUS                     current

         DESCRIPTION

         "The IP Address or the DNS name of the Managed Object."

         ::= { cenAlarmEntry 15 }

 cenAlarmDescription          OBJECT-TYPE

         SYNTAX               OCTET STRING (SIZE(1..1024))

         MAX-ACCESS           read-only

         STATUS               current

         DESCRIPTION

         "A detailed description of the alarm."

         ::= { cenAlarmEntry 16 }

 cenAlarmSeverity        OBJECT-TYPE

         SYNTAX          Integer32  (0..100)

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "The alarm severity indicates the severity of the alarm 

         in integer value."

         ::= { cenAlarmEntry 17 }

 cenAlarmSeverityDefinition      OBJECT-TYPE

         SYNTAX                  SnmpAdminString (SIZE(1..255))

         MAX-ACCESS              read-only

         STATUS                  current

         DESCRIPTION

         "The short description of the severity of the alarm 

         generated. The String is formatted in 

         '<integer>,<alarmSeverity  description>' tuples. The <integer>

         value is the same value that the 'cenAlarmSeverity ' 

         attribute holds. <alarmSeverity description> contains one line

         description of the alarm severity generated."

         ::= { cenAlarmEntry 18 }

 cenAlarmTriageValue     OBJECT-TYPE

         SYNTAX          Integer32(0..100)

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "The triage value of an alarm is a hierarchical weighting value

         (applied by the application, and more importantly customizable 

         by the end  user) to allow an artificial form of evaluating 

         impact, interest, or other user-determined functions between 

         alarms. The value is a positive number or zero where zero 

         denotes an undetermined or uncomputable value." 

         ::= { cenAlarmEntry 19 }	

 cenEventIDList          OBJECT-TYPE

         SYNTAX          OCTET STRING (SIZE(1..1024))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "Comma separated list of the Unique Event identifiers 

         that led to the generation of this Alarm."

         ::= { cenAlarmEntry 20 }

 cenUserMessage1         OBJECT-TYPE

         SYNTAX          SnmpAdminString (SIZE(1..255))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "User input message. This value can be configured."

         ::= { cenAlarmEntry 21 }

 cenUserMessage2         OBJECT-TYPE

         SYNTAX          SnmpAdminString (SIZE(1..255))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "User input message. This value can be configured."

         ::= { cenAlarmEntry 22 }

 cenUserMessage3         OBJECT-TYPE

         SYNTAX          SnmpAdminString (SIZE(1..255))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "User input message. This value can be configured."

         ::= { cenAlarmEntry 23 }

 cenAlarmMode            OBJECT-TYPE

         SYNTAX          INTEGER  {

               unknown(1),

               alert(2),

               event(3)

         }

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "unknown:  When the value for this attribute could not be 

                    determined.       

          alert:    Denotes an alarm generated by a set of events where 

                    all events are reported by polling of managed 

                    objects and/or listening to SNMP notifications.

          event:    Denotes an event generated by polling of managed 

                    ojects and/or listening to SNMP notifications."

         ::= { cenAlarmEntry 24 }

 cenPartitionNumber      OBJECT-TYPE

         SYNTAX          Unsigned32(0..100)

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "In traps generated by the management application that support 

         multiple partitions, the attribute will carry the integer 

         value assigned to identify the logical group where the managed 

         device resides."

         ::= { cenAlarmEntry 25 }

 cenPartitionName        OBJECT-TYPE

         SYNTAX          SnmpAdminString (SIZE(1..255))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "In traps generated by the management application that support

         multiple partitions, the attribute will carry the name 

         assigned to identify the logical group where the managed

         device resides."

         ::= { cenAlarmEntry 26 }

 cenCustomerIdentification      OBJECT-TYPE

         SYNTAX                 SnmpAdminString (SIZE(1..255))

         MAX-ACCESS             read-only

         STATUS                 current

         DESCRIPTION

         "User input message. The attribute takes in a free format

         text. This attribute can be used by advanced management 

         applications to sort responses from the fault management 

         server."

         ::= { cenAlarmEntry 27 }

 cenCustomerRevision     OBJECT-TYPE

         SYNTAX          SnmpAdminString (SIZE(1..255))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "User input message. The attribute takes in a free format

         text. This attribute can be used by advanced management 

         applications to sort responses from the fault management 

         server."

         ::= { cenAlarmEntry 28 }

 cenAlertID     OBJECT-TYPE

         SYNTAX          SnmpAdminString (SIZE(1..20))

         MAX-ACCESS      read-only

         STATUS          current

         DESCRIPTION

         "In event based notification, this attribute will contain the 

         alert id to which the generated event has been rolled up

         to. In alert based notification, the cenAlarmInstanceId and 

         cenAlertID would be identical."

         ::= { cenAlarmEntry 29 }

ciscoEpmNotificationAlarm    NOTIFICATION-TYPE

        OBJECTS  {

                    cenAlarmVersion,

                    cenAlarmTimestamp,

                    cenAlarmUpdatedTimestamp,

                    cenAlarmInstanceID,

                    cenAlarmStatus,

                    cenAlarmStatusDefinition,

                    cenAlarmType,

                    cenAlarmCategory,

                    cenAlarmCategoryDefinition,

                    cenAlarmServerAddressType,

                    cenAlarmServerAddress,

                    cenAlarmManagedObjectClass,

                    cenAlarmManagedObjectAddressType,

                    cenAlarmManagedObjectAddress,

                    cenAlarmDescription,

                    cenAlarmSeverity,

                    cenAlarmSeverityDefinition,

                    cenAlarmTriageValue,

                    cenEventIDList,

                    cenUserMessage1,

                    cenUserMessage2,

                    cenUserMessage3 

        }

        STATUS           deprecated

        DESCRIPTION

        "Notification of the status of the managed object as 

        generated by the  management server. 

        New attributes are added to the ciscoEpmNotificationAlarmRev1.

        Hence this notification is deprecated."

        ::= { ciscoEpmNotificationMIBNotifs 1 }

 ciscoEpmNotificationAlarmRev1    NOTIFICATION-TYPE

         OBJECTS  {

                     cenAlarmVersion,

                     cenAlarmTimestamp,

                     cenAlarmUpdatedTimestamp,

                     cenAlarmInstanceID,

                     cenAlarmStatus,

                     cenAlarmStatusDefinition,

                     cenAlarmType,

                     cenAlarmCategory,

                     cenAlarmCategoryDefinition,

                     cenAlarmServerAddressType,

                     cenAlarmServerAddress,

                     cenAlarmManagedObjectClass,

                     cenAlarmManagedObjectAddressType,

                     cenAlarmManagedObjectAddress,

                     cenAlarmDescription,

                     cenAlarmSeverity,

                     cenAlarmSeverityDefinition,

                     cenAlarmTriageValue,

                     cenEventIDList,

                     cenUserMessage1,

                     cenUserMessage2,

                     cenUserMessage3,

                     cenAlarmMode,

                     cenPartitionNumber,

                     cenPartitionName,

                     cenCustomerIdentification,

                     cenCustomerRevision,

                     cenAlertID

         }

         STATUS           current

         DESCRIPTION

         "Notification of the status of the managed object as 

         generated by the  management server."

         ::= { ciscoEpmNotificationMIBNotifs 2 }

 -- Conformance information

 ciscoEpmNotificationMIBCompliances OBJECT IDENTIFIER 

                            ::= { ciscoEpmNotificationMIBConform 1 }

 ciscoEpmNotificationMIBGroups OBJECT IDENTIFIER 

                            ::= { ciscoEpmNotificationMIBConform 2 }

 -- Compliance

 ciscoEpmNotificationMIBCompliance MODULE-COMPLIANCE

         STATUS deprecated

         DESCRIPTION

         "The compliance statement for entities which 

         implement the CISCO-EPM-NOTIFICATION-MIB. 

         New attributes are included in

         ciscoEpmNotificationMIBComplianceRev1. Hence this object is

         deprecated."

         MODULE -- this module

         MANDATORY-GROUPS { 

             ciscoEpmNotificationObjectsGroup,

             ciscoEpmNotificationAlarmGroup

         }

         GROUP       ciscoEpmAlarmConfigGroup

         DESCRIPTION

         "This group is optional."

         OBJECT cenAlarmTableMaxLength

         MIN-ACCESS read-only

         DESCRIPTION

         "Write access is not required."

         OBJECT cenAlarmVersion

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmTimestamp

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmUpdatedTimestamp

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmInstanceID

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmStatus

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmStatusDefinition

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmType

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmCategory

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmCategoryDefinition

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmServerAddressType

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmServerAddress

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmManagedObjectClass

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmManagedObjectAddressType

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmManagedObjectAddress

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmDescription

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmSeverity

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmSeverityDefinition

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmTriageValue

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenEventIDList

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenUserMessage1

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenUserMessage2

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenUserMessage3

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         ::= { ciscoEpmNotificationMIBCompliances  1 }

 ciscoEpmNotificationMIBComplianceRev1 MODULE-COMPLIANCE

         STATUS current

         DESCRIPTION

         "The compliance statement for entities which 

         implement the CISCO-EPM-NOTIFICATION-MIB."

         MODULE -- this module

         MANDATORY-GROUPS { 

             ciscoEpmNotificationObjectsGroupRev1,

             ciscoEpmNotificationAlarmGroupRev1

         }

         GROUP       ciscoEpmAlarmConfigGroup

         DESCRIPTION

         "This group is optional."

         OBJECT cenAlarmTableMaxLength

         MIN-ACCESS read-only

         DESCRIPTION

         "Write access is not required."

         OBJECT cenAlarmVersion

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmTimestamp

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmUpdatedTimestamp

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmInstanceID

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmStatus

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmStatusDefinition

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmType

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmCategory

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmCategoryDefinition

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmServerAddressType

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmServerAddress

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmManagedObjectClass

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmManagedObjectAddressType

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmManagedObjectAddress

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmDescription

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmSeverity

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmSeverityDefinition

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmTriageValue

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenEventIDList

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenUserMessage1

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenUserMessage2

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenUserMessage3

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlarmMode

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenPartitionNumber

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenPartitionName

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenCustomerIdentification

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenCustomerRevision

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         OBJECT cenAlertID

         MIN-ACCESS accessible-for-notify

         DESCRIPTION

             "Read access is not required."

         ::= { ciscoEpmNotificationMIBCompliance  2 }

 -- Units of Conformance

 ciscoEpmNotificationAlarmGroup NOTIFICATION-GROUP

     NOTIFICATIONS {

         ciscoEpmNotificationAlarm

     }

     STATUS      deprecated

     DESCRIPTION

     "The collection of notifications used to indicate managed 

     object status. 

     ciscoEpmNotificationAlarmGroupRev1 is defined. Hence this 

     object is deprecated."

     ::= { ciscoEpmNotificationMIBGroups 1 }

 ciscoEpmNotificationObjectsGroup    OBJECT-GROUP

     OBJECTS {

                     cenAlarmVersion,

                     cenAlarmTimestamp,

                     cenAlarmUpdatedTimestamp,

                     cenAlarmInstanceID,

                     cenAlarmStatus,

                     cenAlarmStatusDefinition,

                     cenAlarmType,

                     cenAlarmCategory,

                     cenAlarmCategoryDefinition,

                     cenAlarmServerAddressType,

                     cenAlarmServerAddress,

                     cenAlarmManagedObjectClass,

                     cenAlarmManagedObjectAddressType,

                     cenAlarmManagedObjectAddress,

                     cenAlarmDescription,

                     cenAlarmSeverity,

                     cenAlarmSeverityDefinition,

                     cenAlarmTriageValue,

                     cenEventIDList,

                     cenUserMessage1,

                     cenUserMessage2,

                     cenUserMessage3 

     }

     STATUS      deprecated

     DESCRIPTION

     "Trap reflecting the alarm.

     New attributes are added to the new notification 

     ciscoEpmNotificationObjectsGroupRev1. Hence

     this object is deprecated."

     ::= { ciscoEpmNotificationMIBGroups   2 }

 ciscoEpmAlarmConfigGroup    OBJECT-GROUP

     OBJECTS { cenAlarmTableMaxLength }

     STATUS      current

     DESCRIPTION

     "A collection of objects providing information

     about the total number of cenAlarmTable entries

     maintained."

     ::= { ciscoEpmNotificationMIBGroups   3 }

 ciscoEpmNotificationAlarmGroupRev1 NOTIFICATION-GROUP

     NOTIFICATIONS {

         ciscoEpmNotificationAlarmRev1

     }

     STATUS      current

     DESCRIPTION

     "The collection of notifications used to indicate managed object

     status."

     ::= { ciscoEpmNotificationMIBGroups 4 }

 ciscoEpmNotificationObjectsGroupRev1    OBJECT-GROUP

     OBJECTS {

                     cenAlarmVersion,

                     cenAlarmTimestamp,

                     cenAlarmUpdatedTimestamp,

                     cenAlarmInstanceID,

                     cenAlarmStatus,

                     cenAlarmStatusDefinition,

                     cenAlarmType,

                     cenAlarmCategory,

                     cenAlarmCategoryDefinition,

                     cenAlarmServerAddressType,

                     cenAlarmServerAddress,

                     cenAlarmManagedObjectClass,

                     cenAlarmManagedObjectAddressType,

                     cenAlarmManagedObjectAddress,

                     cenAlarmDescription,

                     cenAlarmSeverity,

                     cenAlarmSeverityDefinition,

                     cenAlarmTriageValue,

                     cenEventIDList,

                     cenUserMessage1,

                     cenUserMessage2,

                     cenUserMessage3,

                     cenAlarmMode,

                     cenPartitionNumber,

                     cenPartitionName,

                     cenCustomerIdentification,

                     cenCustomerRevision,

                     cenAlertID

     }

     STATUS      current

     DESCRIPTION

     "Notification reflecting the alarm."

     ::= { ciscoEpmNotificationMIBGroups   5 } 

END

cenAlarmEntry Object-Type—Definitions for Selected Attributes

Table D-1 explains the values for attributes related to alert status, category, and severity. You might find it useful to consult this information when you look at a generated trap.

Table D-1 CenAlarmEntry—Alert Status, Category, and Severity 

Sequence Numbers	Attributes	Values
(6) (7)	cenAlarmStatus cenAlarmStatusDefinition	Number—From 1 to 3. String—Includes number (cenAlarmStatus) and description: 1-Acknowledged 2-Active 3-Cleared Note Alert status changes from state to state: state is Active; if user acknowledges alert, state is Acknowledged; ultimately, state is Cleared. For more information about alerts, see Chapter 3, "Monitoring Alerts and Events."
(9) (10)	cenAlarmCategory cenAlarmCategoryDefinition	Number—From 0 to 9. String—Includes number (cenAlarmCategory) and description: 0-Unknown 1-Application 2-Environment 3-Interface 4-Reachability 5-Connectivity 6-Utilization 7-System Hardware 8-Security 9-Other
(17) (18)	cenAlarmSeverity cenAlarmSeverityDefinition	Number—From 1 to 3. String—Includes number (cenAlarmSeverity) and description: 1-Informational 2-Warning 3-Critical

cenUserMessage1 Object-Type—Attribute with Partition Information

Operations Manager stores the partition number and alias for the identified device in the cenUserMessage1 object-type. The partition number and alias are separated by a colon; for example, Partition 1: Enterprise1. This information is no longer relevant.