Cisco Transport Manager Installation Guide, 8.5 - Appendix D: Updating CTM Daylight Saving Time for New Zealand [Cisco Transport Manager]

Table Of Contents

Updating CTM Daylight Saving Time for New Zealand

D.1  DST Compliance for the CTM Server

D.2  DST Compliance for the CTM Client on Solaris

D.3  DST Compliance for the CTM Client on Windows

Updating CTM Daylight Saving Time for New Zealand

This appendix describes how to make CTM compliant with the New Zealand Daylight Saving Time (DST) settings update. This appendix contains the following sections:

•DST Compliance for the CTM Server

•DST Compliance for the CTM Client on Solaris

•DST Compliance for the CTM Client on Windows

D.1  DST Compliance for the CTM Server

This section describes how to make the CTM server compliant with the New Zealand DST settings.

Step 1 Download the Solaris patch required to support the DST changes from SunSolve Online at http://sunsolve.sun.com. The required patch is 125378-02 or higher.

Note This website is copyright © 1994-2007, Sun Microsystems, Inc. All rights reserved.

Step 2 Download Oracle patch number 6113507, required to support the DST changes. To download the additional required Oracle patch, complete the following substeps:

a. Go to http://metalink.oracle.com and click Login to MetaLink. Enter your Oracle MetaLink username and password.

Note This website is copyright © 2004, Oracle Corporation. All rights reserved.

b. Select Patch from the menu and search for the 6113507 patch.

c. Choose Solaris Operating System (SPARC 64-bit) from the Platform or Language list box.

d. Click Go.

e. Click Download to download the p6113507_10203_SOLARIS64.zip file to your local workstation.

f. Enter the following command to log into the database workstation as the Oracle user:
su - oracle
g. Save the patch to the $ORACLE_HOME directory.

Step 3 Download the TZupdater tool, release 1.2.1 or higher, from the Sun Developer Network (SDN) website at http://java.sun.com/javase/tzupdater_README.html. The TZupdater installer is a single file named tzupdater-1_2_1-2007f.zip.

Step 4 As the root UNIX user, enter the following command to shut down the CTM server:
ctms-stop
Step 5 As the oracle UNIX user, enter the following commands to stop the CTM database:
su - oracle
lsnrctl stop
sqlplus /nolog
connect / as sysdba
shutdown immediate
quit
Step 6 Install the Solaris patches.

Step 7 Install the additional required Oracle patch. Complete the following substeps:

a. Enter the following commands to unzip p6113507_10203_SOLARIS64.zip to your Oracle home directory:
cd $ORACLE_HOME
unzip p6113507_10203_SOLARIS64.zip
A new 6113507 folder is created.

b. Enter the following command to change to the 6113507 folder:
cd 6113507
c. Enter the following command to apply the patch:
../OPatch/opatch apply
d. Enter the following command to check whether the 6113507 patch is installed:
../OPatch/opatch lsinventory | grep 6113507
The output should show the 6113507 patch number.

Step 8 Install the TZupdater tool. Read the installation and usage instructions for the TZupdater tool at http://java.sun.com/javase/tzupdater_README.html. Then, complete the following substeps:

a. As the root UNIX user, enter the following command:
su - root
b. Copy the tzupdater-1_2_1-2007f.zip file to the /tmp directory. Then enter:
cd /tmp
c. Enter the following command to unzip the tzupdater-1_2_1-2007f.zip file:
unzip tzupdater-1_2_1-2007f.zip
A directory named tzupdater-<version>-<date> is created.

d. Enter the following command to enter the tzupdater-<version>-<date> directory:
cd tzupdater-1.2.1-2007f
e. Enter the following command to locate the JRE used by the CTM server:
ls -la /bin/javane
You should see output similar to the following:
lrwxrwxrwx [...] /bin/javane -> /opt/jre1.5.0_12/bin/java
In this example, the <jre_location> is /opt/jre1.5.0_12.

f. Enter the following command:
<jre_location>/bin/java -jar ./tzupdater.jar -u
In this example, enter the following command:
/opt/jre1.5.0_12/bin/java -jar ./tzupdater.jar -u
g. If no message is displayed, enter the following commands to verify that the settings have been applied:
cd <jre_location>/lib
ls -la | grep zi
You should see that the zi directory is modified with the current date and a zi.tzdata<date> directory is displayed, where <date> is the date of the old time zone database that was replaced; for example, zi.tzdata2007e.

Step 9 Enter the following commands to remove the temporary files:
cd /tmp
rm tzupdater*.zip
rm -r tzupdater*
Step 10 As the oracle UNIX user, enter the following commands to start the CTM database:
su - oracle
sqlplus /nolog
connect / as sysdba
startup
quit
lsnrctl start
Step 11 As the root UNIX user, enter the following command to verify that the Oracle processes are running:
ps -ef | grep ora
Step 12 Enter the following command to start the CTM server:
ctms-start
D.2 DST Compliance for the CTM Client on Solaris

This section describes how to make the Solaris CTM client compliant with the New Zealand DST settings.

Step 1 Download the Solaris patch required to support the DST changes from SunSolve Online at http://sunsolve.sun.com. The required patch is 125378-02 or higher.

Note This website is copyright © 1994-2007, Sun Microsystems, Inc. All rights reserved.

Step 2 Download the TZupdater tool, release 1.2.1 or higher, from the Sun Developer Network (SDN) website at http://java.sun.com/javase/tzupdater_README.html. The TZupdater installer is a single file.

Step 3 Exit all of the CTM clients running on the workstation that you are going to patch.

Step 4 Install the Solaris patches.

Step 5 Install the TZupdater tool. Read the installation and usage instructions for the TZupdater tool at http://java.sun.com/javase/tzupdater_README.html. Then, complete the following substeps:

a. As the root UNIX user, enter the following command:
su - root
b. Enter the following command to copy the tzupdater-1_2_1-2007f.zip file to the /tmp directory:
cd /tmp
c. Enter the following command to unzip the tzupdater-1_2_1-2007f.zip file:
unzip tzupdater-1_2_1-2007f.zip
A directory named tzupdater-<version>-<date> is created.

d. Enter the following command to enter the tzupdater-<version>-<date> directory:
cd tzupdater-1.2.1-2007f
e. Enter the following command:
/opt/CiscoTransportManagerClient/jre/bin/java -jar ./tzupdater.jar -u
f. Enter the following commands to verify that the JRE has been patched correctly:
cd /opt/CiscoTransportManagerClient/jre/lib
ls -la | grep zi
You should see that the zi directory is modified with the current date and a zi.tzdata<date> directory is displayed, where <date> is the date of the old time zone database that was replaced; for example, zi.tzdata2007e.

Step 6 Enter the following commands to remove the temporary files:
cd /tmp
rm tzupdater*.zip
rm -r tzupdater*
D.3 DST Compliance for the CTM Client on Windows

This section describes how to make the Windows CTM client compliant with the New Zealand DST settings.

Step 1 Download the TZupdater tool and the necessary Windows patch:

a. Download the Windows patch required to support the DST changes from the Microsoft website at http://www.microsoft.com. The patch required is KB933360.

Note The KB933360 patch is not supported for Microsoft Windows 2000 Professional.

b. Download the TZupdater tool, release 1.2.1 or higher, from the Sun Developer Network (SDN) website at http://java.sun.com/javase/tzupdater_README.html. The TZupdater installer is a single file named tzupdater-1_2_1-2007f.zip.

Step 2 Exit all of the CTM clients running on the Windows CTM client that you are going to patch.

Step 3 Install the Windows patch. Refer to the instructions on the Microsoft website at http://www.microsoft.com.

Step 4 Install the TZupdater tool. Read the installation and usage instructions for the TZupdater tool at http://java.sun.com/javase/tzupdater_README.html. Then, complete the following substeps:

a. Copy the tzupdater-<version>.zip file to a temporary directory.

b. Unzip the file using WinZip or a similar tool. A directory named tzupdater-<version>-<date> is created; for example, tzupdater-1.2.1-2007f.

c. Using Windows Explorer, change directories to display the new directory that you created.

d. Right-click the directory and select the Open Command Window Here option.

e. Enter the following command:
<CTM_client_install_directory>\jre\bin\java -jar .\tzupdater.jar -u
For example, if your client is installed in the C:\Cisco\TransportManagerClient8_5 directory, enter:
C:\Cisco\TransportManagerClient8_5\jre\bin\java -jar .\tzupdater.jar -u
Step 5 Verify that JRE has been patched correctly. Enter the directory where the CTM client is installed; then, enter the jre\lib directory. You should see that the zi directory is modified with the current date and a zi.tzdata<date> directory is displayed, where <date> is the date of the old time zone database that was replaced; for example, zi.tzdata2007e.

	Cisco Transport Manager Installation Guide, 8.5
	Appendix D: Updating CTM Daylight Saving Time for New Zealand
Cisco Transport Manager Installation Guide, 8.5 Preface Chapter 1: System Requirements Chapter 2: Installing the CTM R8.5 Server and Oracle 10g Chapter 3: Upgrading to CTM R8.5 from an Earlier Release Chapter 4: Installing CTM GateWay/CORBA R8.5 Chapter 5: Installing the CTM R8.5 Client and Cisco Edge Craft Appendix A: Installation Error Messages Appendix B: Uninstalling CTM, Cisco Edge Craft, and the Oracle Database Appendix C: Mounting and Unmounting CDs on Sun Solaris Appendix D: Updating CTM Daylight Saving Time for New Zealand Appendix E: Changing the CTM Server IP Address	Download this chapter Appendix D: Updating CTM Daylight Saving Time for New Zealand Download the complete book Cisco Transport Manager R8.5 Installation Guide (full book length pdf file) (PDF - 1 MB) Table Of Contents Updating CTM Daylight Saving Time for New Zealand D.1 DST Compliance for the CTM Server D.2 DST Compliance for the CTM Client on Solaris D.3 DST Compliance for the CTM Client on Windows Updating CTM Daylight Saving Time for New Zealand This appendix describes how to make CTM compliant with the New Zealand Daylight Saving Time (DST) settings update. This appendix contains the following sections: •DST Compliance for the CTM Server •DST Compliance for the CTM Client on Solaris •DST Compliance for the CTM Client on Windows D.1 DST Compliance for the CTM Server This section describes how to make the CTM server compliant with the New Zealand DST settings. Step 1 Download the Solaris patch required to support the DST changes from SunSolve Online at http://sunsolve.sun.com. The required patch is 125378-02 or higher. Note This website is copyright © 1994-2007, Sun Microsystems, Inc. All rights reserved. Step 2 Download Oracle patch number 6113507, required to support the DST changes. To download the additional required Oracle patch, complete the following substeps: a. Go to http://metalink.oracle.com and click Login to MetaLink. Enter your Oracle MetaLink username and password. Note This website is copyright © 2004, Oracle Corporation. All rights reserved. b. Select Patch from the menu and search for the 6113507 patch. c. Choose Solaris Operating System (SPARC 64-bit) from the Platform or Language list box. d. Click Go. e. Click Download to download the p6113507_10203_SOLARIS64.zip file to your local workstation. f. Enter the following command to log into the database workstation as the Oracle user: su - oracle g. Save the patch to the $ORACLE_HOME directory. Step 3 Download the TZupdater tool, release 1.2.1 or higher, from the Sun Developer Network (SDN) website at http://java.sun.com/javase/tzupdater_README.html. The TZupdater installer is a single file named tzupdater-1_2_1-2007f.zip. Step 4 As the root UNIX user, enter the following command to shut down the CTM server: ctms-stop Step 5 As the oracle UNIX user, enter the following commands to stop the CTM database: su - oracle lsnrctl stop sqlplus /nolog connect / as sysdba shutdown immediate quit Step 6 Install the Solaris patches. Step 7 Install the additional required Oracle patch. Complete the following substeps: a. Enter the following commands to unzip p6113507_10203_SOLARIS64.zip to your Oracle home directory: cd $ORACLE_HOME unzip p6113507_10203_SOLARIS64.zip A new 6113507 folder is created. b. Enter the following command to change to the 6113507 folder: cd 6113507 c. Enter the following command to apply the patch: ../OPatch/opatch apply d. Enter the following command to check whether the 6113507 patch is installed: ../OPatch/opatch lsinventory \| grep 6113507 The output should show the 6113507 patch number. Step 8 Install the TZupdater tool. Read the installation and usage instructions for the TZupdater tool at http://java.sun.com/javase/tzupdater_README.html. Then, complete the following substeps: a. As the root UNIX user, enter the following command: su - root b. Copy the tzupdater-1_2_1-2007f.zip file to the /tmp directory. Then enter: cd /tmp c. Enter the following command to unzip the tzupdater-1_2_1-2007f.zip file: unzip tzupdater-1_2_1-2007f.zip A directory named tzupdater-<version>-<date> is created. d. Enter the following command to enter the tzupdater-<version>-<date> directory: cd tzupdater-1.2.1-2007f e. Enter the following command to locate the JRE used by the CTM server: ls -la /bin/javane You should see output similar to the following: lrwxrwxrwx [...] /bin/javane -> /opt/jre1.5.0_12/bin/java In this example, the <jre_location> is /opt/jre1.5.0_12. f. Enter the following command: <jre_location>/bin/java -jar ./tzupdater.jar -u In this example, enter the following command: /opt/jre1.5.0_12/bin/java -jar ./tzupdater.jar -u g. If no message is displayed, enter the following commands to verify that the settings have been applied: cd <jre_location>/lib ls -la \| grep zi You should see that the zi directory is modified with the current date and a zi.tzdata<date> directory is displayed, where <date> is the date of the old time zone database that was replaced; for example, zi.tzdata2007e. Step 9 Enter the following commands to remove the temporary files: cd /tmp *rm tzupdater.zip** rm -r tzupdater* Step 10 As the oracle UNIX user, enter the following commands to start the CTM database: su - oracle sqlplus /nolog connect / as sysdba startup quit lsnrctl start Step 11 As the root UNIX user, enter the following command to verify that the Oracle processes are running: ps -ef \| grep ora Step 12 Enter the following command to start the CTM server: ctms-start D.2 DST Compliance for the CTM Client on Solaris This section describes how to make the Solaris CTM client compliant with the New Zealand DST settings. Step 1 Download the Solaris patch required to support the DST changes from SunSolve Online at http://sunsolve.sun.com. The required patch is 125378-02 or higher. Note This website is copyright © 1994-2007, Sun Microsystems, Inc. All rights reserved. Step 2 Download the TZupdater tool, release 1.2.1 or higher, from the Sun Developer Network (SDN) website at http://java.sun.com/javase/tzupdater_README.html. The TZupdater installer is a single file. Step 3 Exit all of the CTM clients running on the workstation that you are going to patch. Step 4 Install the Solaris patches. Step 5 Install the TZupdater tool. Read the installation and usage instructions for the TZupdater tool at http://java.sun.com/javase/tzupdater_README.html. Then, complete the following substeps: a. As the root UNIX user, enter the following command: su - root b. Enter the following command to copy the tzupdater-1_2_1-2007f.zip file to the /tmp directory: cd /tmp c. Enter the following command to unzip the tzupdater-1_2_1-2007f.zip file: unzip tzupdater-1_2_1-2007f.zip A directory named tzupdater-<version>-<date> is created. d. Enter the following command to enter the tzupdater-<version>-<date> directory: cd tzupdater-1.2.1-2007f e. Enter the following command: /opt/CiscoTransportManagerClient/jre/bin/java -jar ./tzupdater.jar -u f. Enter the following commands to verify that the JRE has been patched correctly: cd /opt/CiscoTransportManagerClient/jre/lib ls -la \| grep zi You should see that the zi directory is modified with the current date and a zi.tzdata<date> directory is displayed, where <date> is the date of the old time zone database that was replaced; for example, zi.tzdata2007e. Step 6 Enter the following commands to remove the temporary files: cd /tmp *rm tzupdater.zip** rm -r tzupdater* D.3 DST Compliance for the CTM Client on Windows This section describes how to make the Windows CTM client compliant with the New Zealand DST settings. Step 1 Download the TZupdater tool and the necessary Windows patch: a. Download the Windows patch required to support the DST changes from the Microsoft website at http://www.microsoft.com. The patch required is KB933360. Note The KB933360 patch is not supported for Microsoft Windows 2000 Professional. b. Download the TZupdater tool, release 1.2.1 or higher, from the Sun Developer Network (SDN) website at http://java.sun.com/javase/tzupdater_README.html. The TZupdater installer is a single file named tzupdater-1_2_1-2007f.zip. Step 2 Exit all of the CTM clients running on the Windows CTM client that you are going to patch. Step 3 Install the Windows patch. Refer to the instructions on the Microsoft website at http://www.microsoft.com. Step 4 Install the TZupdater tool. Read the installation and usage instructions for the TZupdater tool at http://java.sun.com/javase/tzupdater_README.html. Then, complete the following substeps: a. Copy the tzupdater-<version>.zip file to a temporary directory. b. Unzip the file using WinZip or a similar tool. A directory named tzupdater-<version>-<date> is created; for example, tzupdater-1.2.1-2007f. c. Using Windows Explorer, change directories to display the new directory that you created. d. Right-click the directory and select the Open Command Window Here option. e. Enter the following command: <CTM_client_install_directory>\jre\bin\java -jar .\tzupdater.jar -u For example, if your client is installed in the C:\Cisco\TransportManagerClient8_5 directory, enter: C:\Cisco\TransportManagerClient8_5\jre\bin\java -jar .\tzupdater.jar -u Step 5 Verify that JRE has been patched correctly. Enter the directory where the CTM client is installed; then, enter the jre\lib directory. You should see that the zi directory is modified with the current date and a zi.tzdata<date> directory is displayed, where <date> is the date of the old time zone database that was replaced; for example, zi.tzdata2007e.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks