Table Of Contents

Notifications, Fault Management, and Probable Cause Mapping

A.1  Overview of Notifications

A.2  Resolving the Notification Service

A.3  Tips to Improve Notification Throughput

A.4  Supported Events

A.4.1  Object Creation

A.4.2  Object Deletion

A.4.3  Attribute Value Change

A.4.4  State Change Event

A.4.5  Protection Switch

A.4.6  Threshold Crossing Alert

A.4.7  Alarm

A.4.8  Heartbeat Event

A.5  Probable Cause Mapping

A.5.1  TMF-Defined Probable Cause

A.5.2  CTM GateWay/CORBA Mapping—EMS

A.5.3  CTM GateWay/CORBA Mapping—CRS-1 and XR 12000

A.5.4  CTM GateWay/CORBA Mapping—MGX 8880/8850/8830

A.5.5  CTM GateWay/CORBA Mapping—ONS 15216

A.5.6  CTM GateWay/CORBA Mapping—ONS 15302, ONS15305, and ONS15305 CTC

A.5.7  CTM GateWay/CORBA Mapping—ONS15327, ONS 15454 SONET, and ONS 15454 SDH, R4.0 and R4.1

A.5.8  CTM GateWay/CORBA Mapping—ONS 15310 CL, ONS15327, ONS 15454 SONET, and ONS 15454 SDH R5.0

A.5.9  CTM GateWay/CORBA Mapping—ONS 15310 CL, ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R6.0 and R7.2

A.5.10  CTM GateWay/CORBA Mapping—ONS 15310 CL, ONS 15454 SONET, and ONS 15454 SDH R6.1

A.5.11  CTM GateWay/CORBA Mapping—ONS 15310 CL, ONS 15454 SONET, and ONS 15454 SDH R6.2

A.5.12  CTM GateWay/CORBA Mapping—ONS 15501

A.5.13  CTM GateWay/CORBA Mapping—ONS 15530

A.5.14  CTM GateWay/CORBA Mapping—ONS 15540

A.5.15  Optical Monitoring Alarms—ONS 15530 and ONS 15540

A.5.16  CTM GateWay/CORBA Mapping—ONS 15600

A.5.17  CTM GateWay/CORBA Mapping—ONS 15600 SDH

A.5.18  CTM GateWay/CORBA Mapping—ONS 1580x

Notifications, Fault Management, and Probable Cause Mapping

---

This appendix includes information on CTM GateWay/CORBA's notifications, fault management, and probable cause mapping. It provides the following:

•Overview of Notifications

•Resolving the Notification Service

•Tips to Improve Notification Throughput

•Supported Events

•Probable Cause Mapping

A.1  Overview of Notifications

The notification service forwards all fault notifications received from managed NEs to the network management system (NMS). The notification service also forwards object creation, object deletion, attribute change, protection switch, and threshold crossing alert (TCA) events. TMF 814 defines the structure and format of attributes for all events and alarms.

The CTM server and the Operations Support System (OSS) host must have Domain Name System (DNS) enabled in order to receive notifications. OSS clients running behind a firewall must configure an IIOP listening port to enable the TCP connection with the notification server. CTM must configure the notification service listening port number to allow OSS clients to communicate with the notification service.

CTM creates the notification channel with the following QoS parameters:

Table A-1 QoS Parameters for the Notification Channel 

Parameter	Value
ConnectionReliability	BestEffort
StartTimeSupported	false
OrderPolicy	FifoOrder
DiscardPolicy	FifoOrder
MaxEventsPerConsumer1	10000

1 The MaxEventsPerConsumer value is configurable. To modify this value, see B.10  Configuring CTM GateWay/CORBA, page B-7. All other parameter values are defined by the TMF and cannot be changed.

The value of MaxEventsPerConsumer is configurable. To modify this value, see B.6  Using Multiple Naming Servers, page B-4. All other parameter values are defined by TMF and cannot be changed.

CTM sets RejectNewEvents administration property of the channel to true. This is defined by TMF.

Every notification that CTM generates has the QoS parameters listed in Table A-2. These parameter values are defined by the TMF and cannot be changed.

Table A-2 QoS Parameters for Notifications

Parameter	Value
EventReliability	BestEffort
Priority	DefaultPriority
Timeout	30 minutes for alarms and TCAs; 24 hours for all other notifications

The NMS retrieves all active alarms on the Element Management System (EMS) and on managed element objects. The NMS filters alarms based on probable cause and managed element name. CTM GateWay/CORBA forwards CTM-specific alarms to the NMS.

For NE-related alarms, CTM inserts the original probable cause in the alarm's nativeProbableCause field. The TMF-mapped probable cause is available in the probableCause field.

A.2  Resolving the Notification Service

CTM GateWay/CORBA can integrate with external notification services. When CTM GateWay/CORBA starts, a reference to EventNotifyChannelFactory is resolved. CTM GateWay/CORBA makes the following attempts to resolve the object:

1. Resolve initial references with the default service name of NotificationService to resolve the object. You can change the service name by setting the corbagw.notification.ServiceName property in the corbagw.properties file.

2. Resolve the object through the naming service. The default naming service entry is services. NotifyChannelFactory. You can change the naming service entry by setting the corbagw.notification.NamingContext property in the corbagw.properties file.

3. Resolve the object directly through the Interoperable Object Reference (IOR). You can change the URL of the IOR file by setting the corbagw.notification.FactoryIORFile property in the corbagw.properties file. The default location for the IOR file is file://localhost/CTM_baseDir/cfg/NotificationService.ior. You can specify a URL that points to a remote web server.

A.3  Tips to Improve Notification Throughput

While CTM GateWay/CORBA NBI and the bundled notification server are developed and tuned to provide high throughput, you might want to take additional steps to improve throughput and avoid any loss of notifications. You should implement the StructuredPushConsumer interface defined by the Object Management Group (OMG) and implement the push_structured_event method. The notification server invokes this method on the NMS.

---

Caution Because all CORBA calls are blocking, the notification server thread will block until the push_structured_event method completes. If you try to perform a time-consuming task before the method completes, you will block the notification server.

---

To improve throughput, you should receive the event and forward it to another thread for processing.

For example:

void push_structured_event(StructuredEvent notification) {

	try {

		some_other_thread_queue.addNotification(notification);

	} catch (Exception ex) {

		// catch all exception and ignore

		ex.printStackTrace();

	}

}

---

Caution As shown in the example, you must catch all the exceptions. If you do not catch all exceptions, you will stop receiving notifications.

---

A.4  Supported Events

A.4.1  Object Creation

The following subsections list the attributes of each event.

Table A-3 lists the Object Creation types and attributes.

Table A-3 Object Creation 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes.
objectType	notifications::ObjectType_T	Yes.
emsTime	globaldefs::Time_T	Yes.
neTime	globaldefs::Time_T	No.
edgePoint	boolean	No.

Object creation notifications are sent to the NMS for the objects in Table A-4.

Table A-4 Object Creation Notifications 

Object Type	Type Sent in remainder_of_body for Object Creation Event
OT_MANAGED_ELEMENT	managedElement::ManagedElement_T
OT_MULTILAYER_SUBNETWORK	multiLayerSubnetwork::MultiLayerSubnetwork_T
OT_TOPOLOGICAL_LINK	topologicalLink::TopologicalLink_T
OT_SUBNETWORK_CONNECTION	subnetworkConnection::SubnetworkConnection_T
OT_EQUIPMENT	equipment::Equipment_T
OT_PROTECTION_GROUP	protection::ProtectionGroup_T
OT_L2TOPOLOGY	MultiLayerSubnetwork::L2Topology_T
OT_MLVLAN	MultiLayerSubnetwork::MLVLAN_T
OT_ROLL	MultiLayerSubnetwork::Roll_T
OT_VCAT	SubnetworkConnection::VCAT_T

CTM does not generate Object Creation events for SubnetworkConnection for ONS 15540.

CTM cannot give the object name for Object Creation events for ONS 15540, ONS 15530, and ONS 15501 equipment.

For MGX 8880/8850/8830, CTM generates Object Creation events for object types OT_MANAGED_ELEMENT and OT_EQUIPMENT.

---

Note The number of equipment holders for NEs supported by CTM is constant. To reduce traffic between CTM and the NMS, CTM does not generate Object Creation events for equipment holders. The number of PTPs on EQUIPMENT is also constant. Therefore, CTM generates only OBJECT_CREATION events for EQUIPMENT.

---

A.4.2  Object Deletion

Table A-5 lists the Object Deletion types and attributes.

Table A-5 Object Deletion 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes.
objectType	notifications::ObjectType_T	Yes.
emsTime	globaldefs::Time_T	Yes.
neTime	globaldefs::Time_T	No.
edgePoint	boolean	No.

Object deletion notifications are sent to the NMS for the objects in Table A-6.

Table A-6 Object Deletion Notifications 

Object Type	Type Sent in remainder_of_body for Object Deletion Event
OT_MANAGED_ELEMENT	managedElement::ManagedElement_T
OT_MULTILAYER_SUBNETWORK	multiLayerSubnetwork::MultiLayerSubnetwork_T
OT_TOPOLOGICAL_LINK	topologicalLink::TopologicalLink_T
OT_SUBNETWORK_CONNECTION	subnetworkConnection::SubnetworkConnection_T
OT_EQUIPMENT	equipment::Equipment_T
OT_PROTECTION_GROUP	protection::ProtectionGroup_T
OT_L2TOPOLOGY	MultiLayerSubnetwork::L2Topology_T
OT_MLVLAN	MultiLayerSubnetwork::MLVLAN_T
OT_ROLL	MultiLayerSubnetwork::Roll_T
OT_VCAT	SubnetworkConnection::VCAT_T

CTM does not generate Object Deletion events for SubnetworkConnection for ONS 15540, ONS 15530, and ONS 15501.

For MGX 8880/8850/8830, CTM generates Object Deletion events for object types OT_MANAGED_ELEMENT and OT_EQUIPMENT.

---

Note The number of equipment holders for all NEs supported by CTM is constant. To reduce traffic between CTM and the NMS, CTM does not generate object deletion events for equipment holders. The number of PTPs on EQUIPMENT is also constant. Therefore, CTM generates only OBJECT_DELETION events for EQUIPMENT.

---

A.4.3  Attribute Value Change

Table A-7 lists the attribute value change (AVC) types and attributes

Table A-7 Attribute Value Change 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes.
objectType	notifications::ObjectType_T	Yes.
emsTime	globaldefs::Time_T	Yes.
neTime	globaldefs::Time_T	No.
edgePoint	boolean	No.
attributeList	notifications::NVList_T	Yes.

Attribute value change notifications are sent to the NMS for the objects and attributes in Table A-8.

Table A-8 Attribute Value Change Notifications 

Object Type	Attributes
OT_EMS	nativeEMSName
OT_MANAGED_ELEMENT	nativeEMSName location version productName
OT_MULTILAYER_SUBNETWORK	NativeEMSName
OT_TOPOLOGICAL_LINK1	None
OT_SUBNETWORK_CONNECTION2	None
OT_L2TOPOLOGY	NativeEMSName
OT_MLVLAN	None Note The purpose of this event is to notify NMS that this VLAN has been updated.
OT_ROLL	None Note The purpose of this event is to notify NMS that this Roll has been updated.
OT_VCAT	None Note The purpose of this event is to notify NMS that this VCAT has undergone a change.

1 The OT_TOPOLOGICAL_LINK - event notifies the NMS that some attribute of topological link has changed. 2 The OT_SUBNETWORK_CONNECTION - event is generated only when CTM fails to delete SNC and it remains in same state.

---

Note CTM does not generate Attribute Change events for SubnetworkConnection for ONS 15540, ONS 15530, and ONS 15501 NEs.

---

---

Note For MGX 8880/8850/8830, CTM generates Attribute Change events for object types OT_MANAGED_ELEMENT and OT_EMS.

---

A.4.4  State Change Event

Table A-9 lists the state change event types and attributes.

Table A-9 State Change Event 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes.
objectType	notifications::ObjectType_T	Yes.
emsTime	globaldefs::Time_T	Yes.
neTime	globaldefs::Time_T	No.
edgePoint	boolean	No.
attributeList	notifications::NVList_T	Yes.

Attribute change notifications are sent to the NMS for the objects and attributes in Table A-10.

Table A-10 State Change Event Notifications 

Object Type	Attributes
OT_MANAGED_ELEMENT	communicationState—CTM supports following values: •CS_AVAILABLE •CS_UNAVAILABLE emsInSyncState—CTM will support following values: •True •False
OT_EQUIPMENT_HOLDER	holderState—State change. CTM supports the following values: •EMPTY •INSTALLED_AND_EXPECTED •EXPECTED_AND_NOT_INSTALLED •MISMATCH_OF_INSTALLED_AND_EXPECTED
OT_SUBNETWORK_CONNECTION1	sncState—CTM supports the following values: •SNCS_DELETING •SNCS_PARTIAL •SNCS_ACTIVE
OT_L2TOPOLOGY	L2TopoState—CTM supports the following values: •L2TS_COMPLETE •L2TS_INCOMPLETE topoInSyncState—CTM supports following values: •true •false
OT_MLVLAN	vlanState—CTM supports following values: •VLS_COMPLETE •VLS_INCOMPLETE
OT_ROLL	rollState—CTM supports the following values: •ROLL_PENDING •ROLL_COMPLETED •ROLL_CANCELLED •ROLL_INCOMPLETE
OT_VCAT	vcatState—CTM supports the following values: •VCATS_DELETING •VCATS_PARTIAL •VCAT_ACTIVE

1 The OT_SUBNETWORK_CONNECTION event is generated only when CTM changes the SNC. If CTC or any other tool is used to change the SNC, CTM does not report this event.

CTM does not generate State Change events for EquipmentHolder and SubnetworkConnection for ONS 15540, ONS 15530, and ONS 15501 NEs.

For MGX 8880/8850/8830, CTM generates State Change events for object types OT_MANAGED_ELEMENT and OT_EQUIPMENT_HOLDER.

A.4.5  Protection Switch

Table A-11 lists the protection switch types and attributes.

Table A-11 Protection Switch 

Attribute Name	Type	Supported by CTM?
notificationId	String	Yes The uniqueness and the sequence of the notificationId are not guaranteed
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	No
ProtectionType	protection::ProtectionType_T	No
switchReason	protection::switchReason_T	No
layerRate	transmissionParameters::LayerRate_T	No
groupName	globaldefs::NamingAttributes_T	No (yes for ONS 15540 and ONS 15530)
protectedTP	globaldefs::NamingAttributes_T	No (yes for ONS 15540 and ONS 15530)
switchAwayFromTP	globaldefs::NamingAttributes_T	(yes for ONS 15540 and ONS 15530)
switchToTP	globaldefs::NamingAttributes_T	No (yes for ONS 15540 and ONS 15530)
affectedTP Note This is not defined by TMF.	globaldefs::NamingAttributes_T	Yes (no for ONS 15540 and ONS 15530)
Description Note This is not defined by TMF.	String	Yes Value of this field is native NE event value.

---

Note This event is not supported for MGX 8880/8850/8830 NEs.

---

A.4.6  Threshold Crossing Alert

Table A-12 lists the protection switch types and attributes.

Table A-12 Protection Switch 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and the sequence of the notificationId are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes.
nativeEMSName	string	Yes.
objectType	notifications::ObjectType_T	Yes.
emsTime	globaldefs::Time_T	Yes.
neTime	globaldefs::Time_T	Yes.
isClearable	boolean	Yes. Always set to false.
perceivedSeverity	notifications::PerceivedSeverity_T	Yes. Always set to PerceivedSeverity_T.PS_INDETERMINATE.
layerRate	transmissionParameters::LayerRate_T	Yes.
granularity	Granularity_T	Yes.
pmParameterName	PMParameterName_T	Yes. Note If the NE does not report location, this field is empty.
pmLocation	PMLocation_T	Yes. Note If the NE does not report location, this field is empty.
thresholdType	PMThresholdType_T	No.
value	float	Yes.
unit	string	No.

---

Note This event is not supported for ONS 15540, ONS 15530, ONS 15501, and MGX 8880/8850/8830 NEs because TCAs are reported as alarms.

---

A.4.7  Alarm

Table A-13 lists the most common alarm messages.

Table A-13 Alarm 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes.
nativeEMSName	string	Yes.
nativeProbableCause	string	Yes. Note In case of external condition alarms, the string value of the condition type will be appended to this field.
objectType	notifications::ObjectType_T	Yes.
emsTime	globaldefs::Time_T	Yes.
neTime	globaldefs::Time_T	Yes.
isClearable	boolean	Yes. The value is always set to True.
layerRate	transmissionParameters::LayerRate_T	Yes. Note Not supported for ONS 15540, ONS 15530, and ONS 15501 NEs.
probableCause	string	Yes.
probableCauseQualifier	string	Yes. CTM provides the same value as in the nativeProbableCause field.
perceivedSeverity	notifications::PerceivedSeverity_T	Yes.
serviceAffecting	notifications::ServiceAffecting_T	Yes.
affectedTPList	globaldefs::NamingAttributesList_T	Yes.
additionalText	string	Yes.
additionalInfo	globaldefs::NVSList_T	Yes. CTM provides subnetwork name when available. If the alarmed object is OCn PTP, then CTM also includes SDH_SONET_SS_BITS in this list. CTM provides IPAddress for ME-related alarms. CTM provides ManagedElement Name when the object type is OT_EMS and the alarm is ME-related. CTM provides "affectedObject", when the object type is OT_EMS and the nativeProbableCause is "Server Monitor Threshold Crossed".
isPropagated	boolean	Yes. For the MGX 8880/8850/8830, values will be assigned to this field. For all other NEs, this field will always be set to False.
aresFDN	string	Yes.

---

Note If there is an alarm on an STS/VC4 CTP utilizing all the ports of a DS1/E1 card, thealarm is reported with the containing PTP as port=127. If an STS/VC4 SNC exists with one of the drop CTPs of the SNC using all the ports on a DS1/E1 card, and if there is an alarm on the STS CTP, then CTM will report the port number of the containing PTP as 127.

ONS 15800, ONS 15801, and ONS 15808 alarms that are retrieved using the CTM GateWay/CORBA have OT_EQUIPMENT as the object_type field.

---

A.4.8  Heartbeat Event

CTM generates a periodic heartbeat event and pushes the event to the notification channel. By default, this function is disabled. You can configure the interval value through CTM Control Panel. If the interval value is set to 0, the heartbeat event is disabled. By monitoring this event, the NBI client knows whether the notification service is active. The type_name field contains the NT_HEART_BEAT value under the fixed_header for this type of event. Filterable_data has only one field, which is shown in Table A-14.

Table A-14 Heartbeat Event

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.

A.5  Probable Cause Mapping

A.5.1  TMF-Defined Probable Cause

The following report lists the probable causes defined by the TMF:

"UNIDENTIFIED": for alarms that do not match any other string below. EMS shall in this 
case fill out the additional text field as much as possible.

"AIS": alarm indication signal

"AMS": Alternate modulation signal

"AU-AIS": AU alarm indication signal

"BER_SD": signal degrade (includes receiver degrade)

"BER_SF": signal fail (includes receiver failure and excessive BER)

"DCC_FAILURE" : Data Communication Channel Failure

"EMS": EMS system alarm

"EMS_ALM_LOSS": The 1st notification that the EMS may supply after 1 or more notifications 
for protection switch, TCA, alarm, or file transfer status have been discarded by the EMS 
while other events have not been discarded

"EMS_LIFECYCLE_LOSS": The 1st notification that an EMS may supply after 1 or more events 
of type OC/OD/AVC/SC/RC have been discarded by the EMS

"EMS_ALM_AND_LIFECYCLE_LOSS": The 1st notification that an EMS may supply after 1 or more 
notifications for protection switch, TCA, alarm, or file transfer status, and 1 or more 
events of type OC/OD/AVC/SC/RC have been discarded by the EMS

"EQPT": equipment alarm 

"ENV" Environmental/external cause

"FOP_APS": failure of APS protocol

"LCD": Loss of Cell Delineation (from TC Adaptor part of ATM NI)

"LOF": loss of frame (when distinguished from LOS)

"LOM": loss of multiframe (SDH only, since not an alarm in GR-253)

"LOP": loss of pointer

"LOS": loss of signal

"MS-AIS": MS alarm indication signal

"OSC-AIS" : Optical Supervisory Channel alarm indication signal

"OSC_BER_SF" :Optical Supervisory Channel signal fail/RX fail/excessive BER

"OSC_FERF" : Optical Supervisory Channel Far End Receive Failure

"OSC_LOF" : Optical Supervisory Channel Loss of Frame

"OSC_LOS" : Optical Supervisory Channel Loss of Signal

"OSC_SD" : Optical Supervisiory Channel signal degrade

"PLM": payload label mismatch (when reported as an alarm)

"RAI": remote alarm indication (sometimes reported as RDI)

"SECURITY_VIOLATION": security violation

"SSF": server signal fail 

"TCM-AIS": Tandem Connection Sink - Incoming Alarm Indication Signal

"TCM-LOS": Tandem Connection Sink - Loss of Tandem Connection Signal

"TCM-OAI": Tandem Connection Sink - Outgoing Defect Indication ( same / similar to Alarm 
Indication)

"TCM-RAI": Tandem Connection Sink - Remote Defect Indication ( same / similar to Alarm 
Indication)

"TCM-SD" Tandem Connection Sink - Signal Degrade

"TCM-SSF": Tandem Connection Sink - Server Signal Fail

"TCM-TIM" Connection Sink - Trace Identifier Mismatch

"TCM-UNEQ": Tandem Connection Sink - Unequipped

"TIM": trace identifier mismatch (when reported as an alarm)

"TU-AIS": TU alarm indication signal

"TX_DEGRADE": transmitter degrade, including laser degrade

"TX_FAIL": transmitter failure, including laser failure

"UAT": Unavailable Time

"UNEQ": payload unequipped

"VC-AIS": VCL/VCC TP Alarm Indication Signal

"VC-RDI": VCL/VCC TP Remote Defect Indication

"VP-AIS": VPL/VPC TP Alarm Indication Signal

"VP-RDI": VPL/VPC TP Remote Defect Indication

A.5.2  CTM GateWay/CORBA Mapping—EMS

Table A-15 lists the CTM GateWay/CORBA mapping for the EMS.

Table A-15 CTM GateWay/CORBA Mapping for the EMS 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
EMS	Loss of Communication	5001
EMS	Memory Auto or Manual Backup Failure	5002
SECURITY_VIOLATION	Maximum Login Attempts Exceeded	5003
EMS	Partition 0 Free Disk Space Low	5004
EMS	Partition 1 Free Disk Space Low	5005
EMS	Partition 2 Free Disk Space Low	5006
EMS	Partition 3 Free Disk Space Low	5007
EMS	Partition 4 Free Disk Space Low	5008
EMS	Partition 5 Free Disk Space Low	5009
EMS	Partition 6 Free Disk Space Low	5010
EMS	Alarm Resync Unsuccessful	5011
EMS	Server Monitor Threshold Crossed	5012

A.5.3  CTM GateWay/CORBA Mapping—CRS-1 and XR 12000

Table A-16 lists the CTM GateWay/CORBA mapping for the CRS-1 and XR 12000.

Table A-16 CTM GateWay/CORBA Mapping for the CRS-1 and XR 12000 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	Either churn has been detected (due to link synchronization failure) or the churn state has been cleared.	36375
UNIDENTIFIED	Configuration is redistributing more than the allowable number of prefixes to the IS-IS topology. It cannot advertise some routes.	39912
UNIDENTIFIED	Set—When Standby remains in Not Ready state for a long period of time. Cleared—When Standby is removed, reset, or in Ready state.	43040
UNIDENTIFIED	The interface hardware went up or down.	40409
UNIDENTIFIED	Reports the amount of free memory. Values are: Set—Free memory on the node is below the reported threshold. Clear—Free memory is above the minor threshold.	38580
UNIDENTIFIED	Values are: Set—When some monitored disk usages are above 80%. Cleared—When all monitored disk usages are below 80%.	38565
UNIDENTIFIED	Environmental conditions exist on a specified slot. If left unattended, it could result in loss of service or hardware damage.	37332
UNIDENTIFIED	Possible error during sizing of the NVRAM.	41431
UNIDENTIFIED	Detects the NVRAM low battery state. The data stored in NVRAM may be destroyed after powering down the board while battery is in low state.	41428
UNIDENTIFIED	Cannot get PCI device information from the PCI bus manager.	41999
UNIDENTIFIED	An alarm has occurred.	37371
UNIDENTIFIED	The card hardware went up or down.	38690
UNIDENTIFIED	The plane is down. This means that the sprayer cannot reach any destination on the plane. This is a symptom of too many fabric errors.	37970
UNIDENTIFIED	No path detected from the sprayer to the sponge.	37962

A.5.4  CTM GateWay/CORBA Mapping—MGX 8880/8850/8830

Table A-17 lists the CTM GateWay/CORBA mapping for MGX 8880/8850/8830.

Table A-17 CTM GateWay/CORBA Mapping for MGX 8880/8850/8830 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
EMS	Sync-up has not started yet	60009
EMS	Currently in sync-up	60010
EMS	Partial sync-up	60011
EMS	Sync-up failed	60012
EMS	Server in partial sync-up	60013
EMS	Server sync-up failed	60014
The following EMS alarms need to be cleared manually so "isClearable" should be set to "False" in the corresponding GateWay/CORBA alarm event.
EMS	FTP transfer failure	62401
EMS	FTP file size mismatch	62408
EMS	FTP transfer failed	62409
EMS	Upload file error	62410
EMS	Minus 2 trap	62411
EMS	Card lost trap	62412
EMS	SNMP retry exceeded	62413
EMS	FTP retry exceeded	62414
EMS	Stats file error	62416
EMS	Stats file transfer error	62417
EMS	SNMP throttle error	62418
EMS	Backoff failed	62419
EMS	SNMP timeout	62420
EMS	FTP session timeout	62421
EMS	FTP transfer timeout	62422
EMS	Unknown error	62448
EMS	Initialization error	62449
EMS	Communication error in ILOG	62452
EMS	Communication error in shared memory	62453
EMS	Communication error in CORBA	62454
EMS	NTS registration failed	62456
EMS	NTS trap loss	62457
EMS	PM error	62459
EMS	Process restarted	62502
Shelf Level Peripheral Alarms
EQPT	Above normal	60031
EQPT	Below normal	60032
EQPT	Down	60033
EQPT	Power failure	60034
Card Level Alarms: For all Supported Cards on MGX8880/8850/8830
EQPT	Front card not present	60101
EQPT	Front card failed	60102
EQPT	Front card in self test	60103
EQPT	Front card held in reset	60104
EQPT	Front card in boot	60105
EQPT	Front card mismatch	60106
EQPT	Front card unknown alarm	60107
EQPT	Front card core card mismatch	60108
EQPT	Front card failed, no backup	60109
EQPT	Front card reserved	60110
EQPT	Front card down	60111
EQPT	Front card in update mode	60112
EQPT	Front card unavailable	60113
EQPT	Front card downloading	60114
EQPT	Front card downloader	60115
EQPT	Front card downloaded	60116
EQPT	Front card locked	60117
EQPT	Front card in program mode	60118
EQPT	Front card upgrading	60119
EQPT	Front card upgraded	60120
EQPT	Front card frozen	60121
EQPT	Front card in hold mode	60122
EQPT	Front card not responding	60123
EQPT	Front card in initialization	60124
EQPT	Front card blocked	60125
EQPT	Front card removed	60126
EQPT	Primary back card not present	60201
EQPT	Primary back card in mismatch	60202
EQPT	Secondary back card not present	60301
EQPT	Secondary back card in mismatch	60302
EQPT	Primary card not present	60401
EQPT	Primary card failed	60402
EQPT	Primary card in self test	60403
EQPT	Primary card held in reset	60404
EQPT	Primary card in boot	60405
EQPT	Primary card mismatch	60406
EQPT	Primary card unknown alarm	60407
EQPT	Primary card core card mismatch	60408
EQPT	Primary card failed, no backup	60409
EQPT	Primary card reserved	60410
EQPT	Primary card down	60411
EQPT	Primary card in update mode	60412
EQPT	Primary card unavailable	60413
EQPT	Primary card downloading	60414
EQPT	Primary card downloader	60415
EQPT	Primary card downloaded	60416
EQPT	Primary card locked	60417
EQPT	Primary card in program mode	60418
EQPT	Primary card upgrading	60419
EQPT	Primary card upgraded	60420
EQPT	Primary card frozen	60421
EQPT	Primary card in hold mode	60422
EQPT	Primary card not responding	60423
EQPT	Primary card in initialization	60424
EQPT	Primary card blocked	60425
EQPT	Front card removed	60426
EQPT	Secondary card not present	60501
EQPT	Secondary card failed	60502
EQPT	Secondary card in self test	60503
EQPT	Secondary card held in reset	60504
EQPT	Secondary card in boot	60505
EQPT	Secondary card mismatch	60506
EQPT	Secondary card unknown alarm	60507
EQPT	Secondary card core card mismatch	60508
EQPT	Secondary card failed, no backup	60509
EQPT	Secondary card reserved	60510
EQPT	Secondary card down	60511
EQPT	Secondary card in update mode	60512
EQPT	Secondary card unavailable	60513
EQPT	Secondary card downloading	60514
EQPT	Secondary card downloader	60515
EQPT	Secondary card downloaded	60516
EQPT	Secondary card locked	60517
EQPT	Secondary card in program mode	60518
EQPT	Secondary card upgrading	60519
EQPT	Secondary card upgraded	60520
EQPT	Secondary card frozen	60521
EQPT	Secondary card in hold mode	60522
EQPT	Secondary card not responding	60523
EQPT	Secondary card in initialization	60524
EQPT	Redundant blocked	60525
EQPT	Secondary card removed	60526
EQPT	Controller in standby mode	60601
EQPT	License expired	60650
EQPT	License missing	60651
EQPT	Card sync-up failed	60660
EQPT	Redundant card switch over	60661
Sensor Alarms: VXSM
EQPT	Sensor less than threshold value	60670
EQPT	Sensor greater than threshold value	60671
EQPT	Sensor equal to threshold value	60672
EQPT	Sensor less than threshold value	60673
EQPT	Sensor greater than threshold value	60674
EQPT	Sensor equal to threshold value	60675
EQPT	Sensor less than threshold value	60676
EQPT	Sensor greater than threshold value	60677
EQPT	Sensor equal to threshold value	60678
Line Level Alarms
For DS1 Line: AXSM, MPSM, PXM1E, VXSM, VISM, SRME
RAI	Receiving RAI	60701
RAI	Transmitting RAI	60702
AIS	Receiving AIS	60703
AIS	Transmitting AIS	60704
OOF	Receiving OOF	60705
LOS	Receiving LOS	60706
UNIDENTIFIED	Near-End local loop in effect	60707
UNIDENTIFIED	Near-End remote loop in effect	60708
UNIDENTIFIED	Near-End remote Payload loop in effect	60709
OOF	Receiving CRC MF OOF	60710
OOF	Receiving Sig MF OOF	60711
RAI	Receiving MF RAI	60712
AIS	Receiving MF AIS	60713
UNIDENTIFIED	Far-End remote loopback	60714
UNIDENTIFIED	Detected Near-End remote loopback	60715
For DS3 Line: AXSM, MPSM, PXM1E, VXSM, SRME
UNIDENTIFIED	Receiving RAI	60801
RAI	Transmitting RAI	60802
AIS	Receiving AIS	60803
AIS	Transmitting AIS	60804
OOF	Receiving OOF	60805
LOS	Receiving LOS	60806
UNIDENTIFIED	Near-End local loop in effect	60807
UNIDENTIFIED	Near-End remote loop in effect	60808
UNIDENTIFIED	Receiving test pattern	60809
UNIDENTIFIED	Receiving LOCD	60810
UNIDENTIFIED	Receiving C-bit parity pattern	60811
For SONET Line: AXSM, MPSM, PXM1E, VXSM, SRME
AIS	Line Receiving AIS	60901
UNIDENTIFIED	Line Receiving RDI	60902
AIS	Line Transmitting AIS	60903
UNIDENTIFIED	Line Transmitting RDI	60904
LOS	Section LOS	60910
LOF	Section LOF	60911
UNIDENTIFIED	Section trace ID mismatch	60912
LOP	Path Receiving STS LOP	60920
AIS	Path Receiving STS AIS	60921
UNIDENTIFIED	Path Receiving STS RDI	60922
UNEQ	Path Unequipped	60923
UNIDENTIFIED	Path Signal Label mismatch	60924
UNIDENTIFIED	Path Trace failure	60925
AIS	Path Transmitting AIS	60926
UNIDENTIFIED	Path Transmitting RDI	60927
UNIDENTIFIED	Path Signal Receiving LOCD	60928
Line Stats Alarm
DS1/DS3: AXSM, MPSM, PXM1E, VXSM, VISM, SRME
UNIDENTIFIED	Stats Alarm, PES current 15-minute threshold exceeded	61101
UNIDENTIFIED	Stats Alarm, PES 24-hour threshold exceeded	61102
UNIDENTIFIED	Stats Alarm, PSES current 15-minute threshold exceeded	61103
UNIDENTIFIED	Stats Alarm, PSES 24-hour threshold exceeded	61104
UNIDENTIFIED	Stats Alarm, SEFS current 15-minute threshold exceeded	61105
UNIDENTIFIED	Stats Alarm, SEFS 24-hour threshold exceeded	61106
UNIDENTIFIED	Stats Alarm, UAS current 15-minute threshold exceeded	61107
UNIDENTIFIED	Stats Alarm, UAS 24-hour threshold exceeded	61108
UNIDENTIFIED	Stats Alarm, LCV current 15-minute threshold exceeded	61109
UNIDENTIFIED	Stats Alarm, LCV 24-hour threshold exceeded	61110
UNIDENTIFIED	Stats Alarm, PCV current 15-minute threshold exceeded	61111
UNIDENTIFIED	Stats Alarm, PCV 24-hour threshold exceeded	61112
UNIDENTIFIED	Stats Alarm, LES current 15-minute threshold exceeded	61113
UNIDENTIFIED	Stats Alarm, LES 24-hour threshold exceeded	61114
UNIDENTIFIED	Stats Alarm, CCV current 15-minute threshold exceeded	61115
UNIDENTIFIED	Stats Alarm, CCV 24-hour threshold exceeded	61116
UNIDENTIFIED	Stats Alarm, CES current 15-minute threshold exceeded	61117
UNIDENTIFIED	Stats Alarm, CES 24-hour threshold exceeded	61118
UNIDENTIFIED	Stats Alarm, CSES current 15-minute threshold exceeded	61119
UNIDENTIFIED	Stats Alarm, CSES 24-hour threshold exceeded	61120
SONET: AXSM, MPSM, PXM1E, VXSM, SRME
UNIDENTIFIED	Stats Alarm, SONET line, Total ESs	61201
UNIDENTIFIED	Stats Alarm, SONET line, Total SESs	61202
UNIDENTIFIED	Stats Alarm, SONET line, Total CVs	61203
UNIDENTIFIED	Stats Alarm, SONET line, Total UAs	61204
UNIDENTIFIED	Stats Alarm, SONET line, Current ESs	61205
UNIDENTIFIED	Stats Alarm, SONET line, Current SESs	61206
UNIDENTIFIED	Stats Alarm, SONET line, Current CVs	61207
UNIDENTIFIED	Stats Alarm, SONET line, Current UAs	61208
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Current ESs	61209
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Total ESs	61210
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Total SESs	61211
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Total CVs	61212
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Total UAs	61213
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Current SESs	61214
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Current CVs	61215
UNIDENTIFIED	Stats Alarm, SONET line, Far End, Current UASs	61216
UNIDENTIFIED	Stats Alarm, SONET section, Total ESs	61301
UNIDENTIFIED	Stats Alarm, SONET section, Total SESs	61302
UNIDENTIFIED	Stats Alarm, SONET section, Total SEFSs	61303
UNIDENTIFIED	Stats Alarm, SONET section, Total CVs	61304
UNIDENTIFIED	Stats Alarm, SONET section, Current ESs	61305
UNIDENTIFIED	Stats Alarm, SONET section, Current SESs	61306
UNIDENTIFIED	Stats Alarm, SONET section, Current SEFSs	61307
UNIDENTIFIED	Stats Alarm, SONET section, Current CVs	61308
UNIDENTIFIED	Stats Alarm, SONET path, Total ESs	61401
UNIDENTIFIED	Stats Alarm, SONET path, Total SESs	61402
UNIDENTIFIED	Stats Alarm, SONET path, Total CVs	61403
UNIDENTIFIED	Stats Alarm, SONET path, Total UAs	61404
UNIDENTIFIED	Stats Alarm, SONET path, Current ESs	61405
UNIDENTIFIED	Stats Alarm, SONET path, Current SESs	61406
UNIDENTIFIED	Stats Alarm, SONET path, Current CVs	61407
UNIDENTIFIED	Stats Alarm, SONET path, Current UAs	61408
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Current ESs	61409
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Total ESs	61410
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Total SESs	61411
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Total CVs	61412
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Total UAs	61413
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Current SESs	61414
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Current CVs	61415
UNIDENTIFIED	Stats Alarm, SONET path, Far End, Current UASs	61416
Line APS Alarms: AXSM, MPSM, PXM1E, VXSM, SRME
FOP_APS	APS Alarm, Channel Mismatch	61501
FOP_APS	APS Alarm, ProtectionByte Fail	61502
FOP_APS	APS Alarms, FEProtection Failure	61503
FOP_APS	APS Alarms, Mode Mismatch	61504
FOP_APS	APS Alarms, Signal Degrade	61505
FOP_APS	APS Alarms, Signal Failure	61506
FOP_APS	APS Alarms, Line Alarm	61507
FOP_APS	APS Alarms, Line Loopback	61508
FOP_APS	APS Alarms, Stdby signal Degrade	61509
FOP_APS	APS Alarms, Stdby signal Failure	61510
FOP_APS	APS Alarms, Stdby Line Alarm	61511
FOP_APS	APS Alarms, Stdby Line Loopback	61512
FOP_APS	APS Alarms, Direction Mismatch	61513
FOP_APS	APS Alarms, Wrong Request	61514
EQPT	APS Alarms, Protect BC missing	61515
EQPT	APS Alarms, Protect DC missing	61516
EQPT	APS Alarms, Working BC missing	61517
EQPT	APS Alarms, Working DC missing	61518
EQPT	APS Alarms, Working Card mismatch	61519
EQPT	APS Alarms, Protect Card mismatch	61520
FOP_APS	APS Alarms, apsRevertiveSwitchFail	61521
FOP_APS	APS Alarms, apsManulSwitchFail	61522
FOP_APS	APS Alarms, apsSDLowSwitchFail	61523
FOP_APS	APS Alarms, apsSDHighSwitchFail	61524
FOP_APS	APS Alarms, apsSFLowSwitchFail	61525
FOP_APS	APS Alarms, apsSFHighSwtichFail	61526
FOP_APS	APS Alarms, apsForceSwitchFail	61527
FOP_APS	APS Alarms, apsLockOutSwitchFail	61528
FOP_APS	APS Alarms, apslineStatusOk	61529
Port Alarms: AXSM, MPSM, PXM1E
UNIDENTIFIED	Port, not configured	61751
UNIDENTIFIED	Port, down/failure	61752
UNIDENTIFIED	Port, remote loopback	61753
UNIDENTIFIED	Port, signaling failure	61754
UNIDENTIFIED	Port, out of cell delineation	61755
UNIDENTIFIED	Port, lower layer down	61756
RPM Port Alarms: RPM, RPM-XF
UNIDENTIFIED	RPM Port, Down	62101
UNIDENTIFIED	RPM Port, Testing	62102
UNIDENTIFIED	RPM Port, Unknown	62103
UNIDENTIFIED	RPM Port, lower layer down	62104
SVC Port Alarms: AXSM, VXSM, RPM-XF, RPM
UNIDENTIFIED	SVC Port, failed	62201
UNIDENTIFIED	SVC Port, Inactive	62202
UNIDENTIFIED	SVC Port, lower layer down	62203
VISM Port Alarms: VISM
UNIDENTIFIED	VISM Port, failed	62221
UNIDENTIFIED	VISM Port, Degraded	62222
UNIDENTIFIED	VISM Port, lower layer down	62223
Aggregate Port Alarms: AXSM, MPSM, PXM1E RPM, RPM-XF
UNIDENTIFIED	Aggregate Port alarm; one or more connections on this port are in primary failure	62301
UNIDENTIFIED	Aggregate Port alarm; one or more connections on this port are in secondary failure	62302
UNIDENTIFIED	Aggregate Port alarm; one or more connections on this port are incomplete	62303
Connection Alarm: AXSM, MPSM, PXM1E, VXSM, VISM, RPM, RPM-XF
UNIDENTIFIED	Connection Alarm, Primary Failure	62601
UNIDENTIFIED	Connection Alarm, Secondary Failure	62602
UNIDENTIFIED	Incomplete Connection	62603
Card Level VXSM and VISM Alarms
UNIDENTIFIED	CAC Resources, Above high threshold value	60681
UNIDENTIFIED	CAC Resources, Above medium threshold value	60683
UNIDENTIFIED	Media Gateway Link state, pendingIs	60611
UNIDENTIFIED	Media Gateway Link state, pendingFoos	60613
UNIDENTIFIED	Media Gateway Link state, pendingGoos	60614
UNIDENTIFIED	Media Gateway Link state, outOfService	60612
UNIDENTIFIED	Media Gateway Link state, mgcDirectOos	60615
UNIDENTIFIED	RUDP Session state, Out Of Service	60631
UNIDENTIFIED	RUDP Session state, StandbyIs	60632
UNIDENTIFIED	RUDP Session state, FullIs	60633
UNIDENTIFIED	RUDP Session state, Unknown	60634
UNIDENTIFIED	Session Group state, Out Of Service	60641
UNIDENTIFIED	Session Group state, Unknown	60642
UNIDENTIFIED	Session Set state, Out Of Service	60691
UNIDENTIFIED	Session Set state, StandbyIs	60692
UNIDENTIFIED	Session Set state, FullI	60693
UNIDENTIFIED	Session Set state, Unknown	60694
UNIDENTIFIED	MGC in Redundancy group, inactive	60211
UNIDENTIFIED	MGC communication state, inactive	60221
UNIDENTIFIED	RTP Connection state, failed	60231
UNIDENTIFIED	CID state, failed	60241
UNIDENTIFIED	MTP Link Set Active	66001
UNIDENTIFIED	MTP Link Set Inactive	66002
UNIDENTIFIED	MTP Link Set Inhibited	66003
UNIDENTIFIED	MTP Link Set Unhibited	66004
UNIDENTIFIED	MTP Link Set Shut	66005
UNIDENTIFIED	MTP Link Set No Shut	66006
UNIDENTIFIED	MTP Link Active	66007
UNIDENTIFIED	MTP Link Inactive	66008
UNIDENTIFIED	MTP Link Inhibited	66009
UNIDENTIFIED	MTP Link Unhibited	66010
UNIDENTIFIED	MTP Link Shut	66011
UNIDENTIFIED	MTP Link No Shut	66012
UNIDENTIFIED	MTP Signaling Gateway Route Available	66013
UNIDENTIFIED	MTP Signaling Gateway Route Unavailable	66014
UNIDENTIFIED	MTP Signaling Gateway Route Restricted	66015
UNIDENTIFIED	L3UA ASP Active	66016
UNIDENTIFIED	L3UA ASP Inactive	66017
UNIDENTIFIED	L3UA ASP Down	66018
UNIDENTIFIED	L3UA ASP Undefined	66019
UNIDENTIFIED	L3UA AS Active	66020
UNIDENTIFIED	L3UA AS Inactive	66021
UNIDENTIFIED	L3UA AS Down	66022
UNIDENTIFIED	L3UA AS Pending	66023
UNIDENTIFIED	L3UA AS Undefined	66024
UNIDENTIFIED	DPNSS DLC Active	66025
UNIDENTIFIED	DPNSS DLC Inactive	66026
UNIDENTIFIED	Gateway Voice Quality Alert	66027
UNIDENTIFIED	Gateway VBD Call Quality Alert	66028
UNIDENTIFIED	Gateway Voice Quality Alert for IP-IP	66029
UNIDENTIFIED	Gateway VQM Trap Queue Full	66030
UNIDENTIFIED	System Resource Utilization Threshold Exceeded	66031
UNIDENTIFIED	System Resource Utilization Normal	66032
UNIDENTIFIED	System Resource Utilization Medium Level Exceeded	66033
UNIDENTIFIED	Zero Percent Call Reduce Rate Reached	66034
UNIDENTIFIED	Maximum Call Reduce Rate Reached	66035
UNIDENTIFIED	Gateway Drop Call Starts	66036
UNIDENTIFIED	Gateway Drop Call Alert Cleared	66037
UNIDENTIFIED	Gateway Overload Normal	66038
UNIDENTIFIED	Gateway Overload Threshold Exceeded	66039
Line Level VISM and VXSM Alarms
UNIDENTIFIED	Endpoint state, failed	60251
UNIDENTIFIED	Endpoint state, degraded	60252
UNIDENTIFIED	LAPD state, inactive	61591
UNIDENTIFIED	LAPD Trunk state, inactive	61531
UNIDENTIFIED	LAPD Trunk state, unknown	61532

A.5.5  CTM GateWay/CORBA Mapping—ONS 15216

A.5.5.1  ONS 15216 OADM

Table A-18 lists the alarms for ONS 15216 OADM Release 2.0.

Table A-18 CTM GateWay/CORBA Alarms for the ONS 15216 OADM 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
LOS	Add Channel Signal Loss	8501
LOS	Drop Channel Signal Loss	8502
EQPT	Add and Drop Channels Are Out of Tolerance	8503
EQPT	Add Channel Signal Is Too Weak and VOA Cannot Adjust It To Match the Drop Signal	8504
EQPT	A_POWER Unit Failed	8505
EQPT	B_POWER Unit Failed	8506

Table A-19 lists the alarms for the ONS 15216 EDFA Releases 2.2 and 2.4.

Table A-19 CTM GateWay/CORBA Alarms for the ONS EDFA Releases 2.2 and 2.4 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	Unknown Alarm	8601
EQPT	Excessive Pump1 Current	8602
EQPT	Excessive Pump2 Current	8603
EQPT	Excessive Pump1 Laser Temperature	8604
EQPT	Excessive Pump2 Laser Temperature	8605
EQPT	Loss of Output Power	8606
EQPT	Loss of Input Power	8607
EQPT	Gain Out of Range	8608
EQPT	Case Temperature Out of Range	8609
EQPT	A_POWER Unit Failed	8610
EQPT	B_POWER Unit Failed	8611
EQPT	Database Backup	8612
EQPT	Database Restore	8613
EQPT	Cutover Reset	8614
EQPT	Software Load	8615
EQPT	Software Reset	8616

A.5.5.2  ONS 15216 EDFA3

Table A-20 lists the alarms for the ONS 15216 EDFA3 Release 1.0.

Table A-20 CTM GateWay/CORBA Alarms for ONS 15216 EDFA Release 1.0 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	Unknown Alarm	8701
EQPT	Gain Degrade High	8702
EQPT	Gain Degrade Low	8703
EQPT	Laser 1 Bias Degrade	8704
EQPT	Laser 2 Bias Degrade	8705
EQPT	Laser 1 Bias Fail	8706
EQPT	Laser 2 Bias Fail	8707
EQPT	Power Degrade High LINE1TX Port	8708
EQPT	Power Degrade Low LINE1TX Port	8709
EQPT	Power Fail Low LINE1RX Port	8710
EQPT	Power Fail Low LINE1TX Port	8711
EQPT	Power Fail Low LINE2RX Port	8712
EQPT	VOA Degrade High	8713
EQPT	VOA Degrade Low	8714
EQPT	VOA Fail High	8715
EQPT	Case Temperature Out of Range	8716
EQPT	Fiber Temperature Out of Range	8717
EQPT	Excessive Pump 1 Temperature	8718
EQPT	Excessive Pump 2 Temperature	8719
EQPT	Backup/Restore In Progress	8720
EQPT	Data Integrity Fault	8721
EQPT	Equipment Failure	8722
EQPT	Exceeding Memory Capacity	8723
EQPT	Exceeding Flash File System Capacity	8724
EQPT	Module Communication Failure	8725
EQPT	Power Bus A Alarm	8726
EQPT	Power Bus B Alarm	8727

A.5.6  CTM GateWay/CORBA Mapping—ONS 15302, ONS15305, and ONS15305 CTC

Table A-21 lists the CTM GateWay/CORBA mapping for ONS 15302 and ONS 15305.

Table A-21 CTM GateWay/CORBA Mapping for ONS 15302, ONS 15305, and
ONS 15305 CTC 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	ONS1530x condition unknown	19000
AIS	Alarm indication signal	19001
AIS	Alarm indication signal network side	19002
LOF	Alarm indication signal customer side	19003
LOF	Loss of frame alignment	19004
LOF	Loss of frame alignment network side	19005
LOF	Loss of frame alignment customer side	19006
LOP	Loss of pointer	19007
LOS	Loss of signal	19008
BER_SD	Degraded signal defect	19009
LOM	Loss of multiframe alignment	19010
RAI	Remote defect indication	19011
TIM	Trace identifier mismatch	19012
PLM	Payload mismatch	19013
UNEQ	Unequipped	19014
BER_SF	Excessive error defect	19015
UNIDENTIFIED	Communication subsystem failure	19016
SSF	Server signal failure	19017
UNIDENTIFIED	Alarm condition detected on an alarm input port	19018
EQPT	Device main unit failure	19019
EQPT	High temperature alarm	19020
EQPT	Fan failure	19021
EQPT	Power input failure	19022
EQPT	Power output failure	19023
EQPT	Module mismatch	19024
EQPT	Module removed	19025
EQPT	Module failure	19026
UNIDENTIFIED	MSP signalling problem	19027
UNIDENTIFIED	Power module failure	19028
UNIDENTIFIED	LAN port is not working	19029
UNIDENTIFIED	WAN port is not working	19030
UNIDENTIFIED	Too large delay on WAN channel	19031
UNIDENTIFIED	Sequence number fail on WAN channel	19032
UNIDENTIFIED	No synchronization source available	19033
UNIDENTIFIED	Defecting HW impacting internal T0 clock	19034
UNIDENTIFIED	No T4 synchronization source available with QL >= QL min	19035
UNIDENTIFIED	Inventory failure	19036
UNIDENTIFIED	Diagnostic failure	19037
UNIDENTIFIED	DXC inlet failure	19038
UNIDENTIFIED	DXC inlet bit error	19039
UNIDENTIFIED	Card isolated	19040
UNIDENTIFIED	Card anomaly	19041
UNIDENTIFIED	Hot swap failure	19042
UNIDENTIFIED	Power input failure	19043
UNIDENTIFIED	Transmit degrade on laser	19044
UNIDENTIFIED	Transmit fail on laser	19045
UNIDENTIFIED	Port activated without mapping to an available VC-12	19046
UNIDENTIFIED	Differential VC12 delay for the WAN port is greater than +/- 2ms	19047
UNIDENTIFIED	Rx buffer overflow in LAN or link interface	19048
UNIDENTIFIED	Interport queue overflow in LAN or link interface	19049
UNIDENTIFIED	Reset of the router/bridge required	19050
UNIDENTIFIED	Device aborted FTP session	19051
UNIDENTIFIED	Automatic switchover to backup link, main link fault	19052
UNIDENTIFIED	Overflow layer 2 forward table	19053
UNIDENTIFIED	Connection failed: Frame Relay Switch and WanGate	19054
UNIDENTIFIED	Connection establish: Frame Relay Switch and WanGate	19055
UNIDENTIFIED	Error occurred during initialization	19056
UNIDENTIFIED	Overflow in the client table	19057
UNIDENTIFIED	Server not responding to dispatcher polling	19058
UNIDENTIFIED	SNMP SET request was rejected	19059
UNIDENTIFIED	Ping sequence completed	19060
UNIDENTIFIED	Backup taken over for main server or server up after failure	19061
UNIDENTIFIED	DHCP failed to allocate IP address to requesting host	19062
UNIDENTIFIED	Overflow IGMP table	19063
UNIDENTIFIED	Overflow PIM table	19064
UNIDENTIFIED	Overflow condition in Routing table	19065
UNIDENTIFIED	OpenGate IPX RIP table overflow	19066
UNIDENTIFIED	OpenGate IPX SAP table overflow	19067
UNIDENTIFIED	FACS state ne bt with operation blockAndReport	19068
UNIDENTIFIED	Zero hop routing connections table overflow	19069
UNIDENTIFIED	No available IP virtual address	19070
UNIDENTIFIED	Virtual IP address appeared as a source IP	19071
UNIDENTIFIED	Source IP address sent an ARP specifying a virtual IP	19072
UNIDENTIFIED	PPP link got an unrecognized secret	19073
UNIDENTIFIED	FR DLCI status change	19074
UNIDENTIFIED	CHAP failed communication	19075
UNIDENTIFIED	IP SFFT overflow	19076
UNIDENTIFIED	IP NFFT overflow	19077
UNIDENTIFIED	IPX SFFT overflow	19078
UNIDENTIFIED	IPX NFFT overflow	19079
UNIDENTIFIED	IPM FFT overflow	19080
UNIDENTIFIED	PAP failed communication	19081
UNIDENTIFIED	Automatic switchover to backup link, main link fault	19082
UNIDENTIFIED	Informational event	19083
UNIDENTIFIED	T0SyncSwitch	19084
UNIDENTIFIED	T0QIFailed	19085
UNIDENTIFIED	T0QIDnu	19086
UNIDENTIFIED	SwitchToProt	19087
UNIDENTIFIED	SwitchToWork	19088
UNIDENTIFIED	MspComTimeOut	19089
UNIDENTIFIED	MspComOverruled	19090
UNIDENTIFIED	Loop closed	19091
UNIDENTIFIED	Loop opened	19092
UNIDENTIFIED	Link up	19093
UNIDENTIFIED	Link down	19094
UNIDENTIFIED	The communication link has come up	19095
UNIDENTIFIED	Failure in communication link	19096
UNIDENTIFIED	Addressee of a protocol message not properly authenticated	19097
UNIDENTIFIED	Reinitializing; configuration or the protocol entity implementation may be altered	19098
UNIDENTIFIED	Reinitializing; neither configuration nor protocol entity implementation altered	19099
UNIDENTIFIED	RMON alarm has crossed the rising threshold	19100
UNIDENTIFIED	RMON alarm has crossed the falling threshold	19101
UNIDENTIFIED	Loss of an adjacency with a PIM neighbor	19102
UNIDENTIFIED	Device finished TFTP transaction	19103
UNIDENTIFIED	Device initiated TFTP transaction	19104
UNIDENTIFIED	Auto configuration completed successfully	19105
UNIDENTIFIED	VLAN port dynamically added	19106
UNIDENTIFIED	VLAN port dynamically changed	19107
UNIDENTIFIED	Physical description device changed	19108
UNIDENTIFIED	Port transition from learning to forwarding	19109
UNIDENTIFIED	Port transition from forwarding to learning	19110
UNIDENTIFIED	Packet drop due to the QoS policy	19111
UNIDENTIFIED	Packet forwarded based on the QoS policy	19112
UNIDENTIFIED	Protection link activated	19113
UNIDENTIFIED	Working link activated	19114
UNIDENTIFIED	MSP command timeout	19115
UNIDENTIFIED	MSP command overruled	19116
UNIDENTIFIED	Loss of external synchronization	19117
UNIDENTIFIED	ONS1530x condition unknown	19999

A.5.7  CTM GateWay/CORBA Mapping—ONS15327, ONS 15454 SONET, and ONS 15454 SDH, R4.0 and R4.1

Table A-22 lists the CTM GateWay/CORBA mapping for the ONS 15327, ONS 15454 SONET, and ONS 15454 SDH Release 4.0 and Release 4.1.

Table A-22 CTM GateWay/CORBA Mapping for the ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R4.0 and R4.1 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	Normal Condition	25000
ENV	Failure Detected External to the NE	25001
ENV	External Error	25002
UNIDENTIFIED	Excessive Switching	25003
UNIDENTIFIED	Incoming Failure Condition	25004
AIS	Alarm Indication Signal	25005
AIS	Alarm Indication Signal - Line	25006
AIS	Alarm Indication Signal - Path	25007
FOP_APS	APS Channel Failure	25008
FOP_APS	Byte Failure	25009
FOP_APS	Protection Switching Channel Match Failure	25010
FOP_APS	Automatic Protection Switch Mode Mismatch	25011
FOP_APS	Far End Protection Line Failure	25012
UNIDENTIFIED	Bipolar Violation	25013
UNIDENTIFIED	Carrier Loss on the LAN	25014
UNIDENTIFIED	STS Concatenation Error	25015
UNIDENTIFIED	Excess Collisions on the LAN	25016
UNIDENTIFIED	Facility Failure	25017
UNIDENTIFIED	Far End Block Error	25018
LOF	Loss of Frame	25019
LOP	Loss of Pointer	25020
LOP	Loss of Pointer - Path	25021
LOS	Loss of Signal	25022
UNIDENTIFIED	Out of Frame	25023
UNIDENTIFIED	Path Selector failure	25024
RAI	Remote Alarm Indication	25025
RAI	Remote Failure Indication	25026
RAI	Remote Failure Indication - Line	25027
RAI	Remote Failure Indication - Path	25028
BER_SD	Signal Degrade	25029
UNIDENTIFIED	Severely Errored Frame	25030
UNIDENTIFIED	Invalid Alarm	25031
BER_SF	Signal Failure	25032
UNIDENTIFIED	Signal Label Mismatch Failures	25033
UNIDENTIFIED	Payload Defect Indication	25034
UNIDENTIFIED	Payload Defect Indication - Path	25035
PLM	Payload Label Mismatch - Path	25036
UNEQ	Unequipped - Path	25037
UNIDENTIFIED	Loss of Synchronization	25038
UNIDENTIFIED	Out of Synchronization	25039
UNIDENTIFIED	Primary Synchronization Reference Failure	25040
UNIDENTIFIED	Secondary Synchronization Reference Failure	25041
UNIDENTIFIED	Third Synchronization Reference Failure	25042
UNIDENTIFIED	Fourth Synchronization Reference Failure	25043
UNIDENTIFIED	Fifth Synchronization Reference Failure	25044
UNIDENTIFIED	Sixth Synchronization Reference Failure	25045
UNIDENTIFIED	Outgoing Failure Condition	25046
RAI	Remote Defect Indication - Line	25047
RAI	Remote Defect Indication - Path	25048
UNIDENTIFIED	Free Running Synchronization Mode	25049
UNIDENTIFIED	Holdover Synchronization Mode	25050
EQPT	Internal Fault	25051
UNIDENTIFIED	Internal Error	25052
UNIDENTIFIED	Internal Message Error	25053
UNIDENTIFIED	Mismatch of Equipment And Attributes	25054
UNIDENTIFIED	Watchdog Timer Timeout	25055
ENV	Software Fault or Failure	25056
ENV	Software Fault - Data Integrity Fault	25057
UNIDENTIFIED	Program Failure	25058
EQPT	Control Equipment Failure	25059
EQPT	Control Processor Failure	25060
EQPT	Working Memory Failure	25061
EQPT	Interconnection Equipment Failure	25062
EQPT	Time Slot Interchange Equipment Failure	25063
EQPT	Equipment Failure	25064
EQPT	High Temperature	25065
EQPT	Facility Termination Equipment Failure	25066
EQPT	Automatic Laser Shutdown	25067
UNIDENTIFIED	Failure to Release From Protection	25068
EQPT	Receiver Failure	25069
EQPT	Transmit Failure	25070
UNIDENTIFIED	Failure to Switch to Protection	25071
UNIDENTIFIED	Equipment Unit Plug-In	25072
UNIDENTIFIED	Internal Power Failure	25073
UNIDENTIFIED	Fuse Alarm	25074
UNIDENTIFIED	Synchronization Unit Failure	25075
UNIDENTIFIED	Synchronization Switching Equipment Failure	25076
EQPT	Equipment Unit Unplugged	25077
EQPT	Manually Caused Abnormal Condition	25078
UNIDENTIFIED	Manual Alarm Cutoff	25079
UNIDENTIFIED	Procedural Error	25080
EQPT	Improper Removal	25081
UNIDENTIFIED	Protection Unit Not Available	25082
UNIDENTIFIED	Protection Switch	25083
UNIDENTIFIED	Recovery or Service Protection Action Has Been Initiated	25084
UNIDENTIFIED	Automatic System Reset	25085
UNIDENTIFIED	Cold Restart	25086
UNIDENTIFIED	Forced Switch Back to Working	25087
UNIDENTIFIED	Forced Switch to Protection	25088
UNIDENTIFIED	Initialization Initiated	25089
UNIDENTIFIED	Lockout of Protection	25090
UNIDENTIFIED	Lockout of Working	25091
UNIDENTIFIED	Manual System Reset	25092
UNIDENTIFIED	Manual Switch to Internal Clock	25093
UNIDENTIFIED	Manual Switch to Primary Reference	25094
UNIDENTIFIED	Manual Switch to Secondary Reference	25095
UNIDENTIFIED	Manual Switch to Third Reference	25096
UNIDENTIFIED	Manual Switch to Fourth Reference	25097
UNIDENTIFIED	Manual Switch to Fifth Reference	25098
UNIDENTIFIED	Manual Switch to Sixth Reference	25099
UNIDENTIFIED	Manual Switch Back to Working	25100
UNIDENTIFIED	Manual Switch to Protection	25101
UNIDENTIFIED	Powerfail Restart	25102
UNIDENTIFIED	Software Download In Progress	25103
UNIDENTIFIED	Switch to Internal Clock	25104
UNIDENTIFIED	Switch to Primary Reference	25105
UNIDENTIFIED	Switch to Secondary Reference	25106
UNIDENTIFIED	Switch to Third Reference	25107
UNIDENTIFIED	Switch to Fourth Reference	25108
UNIDENTIFIED	Switch to Fifth Reference	25109
UNIDENTIFIED	Switch to Sixth Reference	25110
UNIDENTIFIED	Switched Back to Working	25111
UNIDENTIFIED	Switched to Protection	25112
UNIDENTIFIED	Warm Restart	25113
UNIDENTIFIED	Ring is in Wait to Restore State	25114
EQPT	Primary Nonvolatile Backup Memory Failure	25115
EQPT	Secondary Nonvolatile Backup Memory Failure	25116
EQPT	Control Bus Failure	25117
EQPT	Control Communications Equipment Failure	25118
UNIDENTIFIED	Loopback	25119
UNIDENTIFIED	Loopback, Network	25120
UNIDENTIFIED	Loopback, Terminal	25121
EQPT	Fan Failure	25122
DCC_FAILURE	SDCC Termination Failure	25123
UNIDENTIFIED	Loopback Facility	25124
EQPT	Payload Bus Failure to I/O Slot 1 (XCON Slot 8)	25125
EQPT	Payload Bus Failure to I/O Slot 2 (XCON Slot 8)	25126
EQPT	Payload Bus Failure to I/O Slot 3 (XCON Slot 8)	25127
EQPT	Payload Bus Failure to I/O Slot 4 (XCON Slot 8)	25128
EQPT	Payload Bus Failure to I/O Slot 5 (XCON Slot 8)	25129
EQPT	Payload Bus Failure to I/O Slot 6 (XCON Slot 8)	25130
EQPT	Payload Bus Failure to I/O Slot 12 (XCON Slot 8)	25131
EQPT	Payload Bus Failure to I/O Slot 13 (XCON Slot 8)	25132
EQPT	Payload Bus Failure to I/O Slot 14 (XCON Slot 8)	25133
EQPT	Payload Bus Failure to I/O Slot 15 (XCON Slot 8)	25134
EQPT	Payload Bus Failure to I/O Slot 16 (XCON Slot 8)	25135
EQPT	Payload Bus Failure to I/O Slot 17 (XCON Slot 8)	25136
EQPT	Payload Bus Failure to I/O Slot 1 (XCON Slot 10)	25137
EQPT	Payload Bus Failure to I/O Slot 2 (XCON Slot 10)	25138
EQPT	Payload Bus Failure to I/O Slot 3 (XCON Slot 10)	25139
EQPT	Payload Bus Failure to I/O Slot 4 (XCON Slot 10)	25140
EQPT	Payload Bus Failure to I/O Slot 5 (XCON Slot 10)	25141
EQPT	Payload Bus Failure to I/O Slot 6 (XCON Slot 10)	25142
EQPT	Payload Bus Failure to I/O Slot 12 (XCON Slot 10)	25143
EQPT	Payload Bus Failure to I/O Slot 13 (XCON Slot 10)	25144
EQPT	Payload Bus Failure to I/O Slot14 (XCON Slot 10)	25145
EQPT	Payload Bus Failure to I/O Slot15 (XCON Slot 10)	25146
EQPT	Payload Bus Failure to I/O Slot16 (XCON Slot 10)	25147
EQPT	Payload Bus Failure to I/O Slot17 (XCON Slot 10)	25148
EQPT	Control Bus 1 Failure	25149
EQPT	Control Bus 2 Failure	25150
EQPT	Invalid MAC Address	25151
EQPT	Board Failure	25152
EQPT	Diagnostics Failure	25153
EQPT	Medium Access Control Failure	25154
UNIDENTIFIED	Duplicate Node ID	25155
UNIDENTIFIED	Failure to Switch to Protection - Ring	25156
UNIDENTIFIED	Failure to Switch to Protection - Span	25157
UNIDENTIFIED	Manual Switch Back to Working - Ring	25158
UNIDENTIFIED	Manual Switch Back to Working - Span	25159
UNIDENTIFIED	Manual Switch to Protection - Ring	25160
UNIDENTIFIED	Manual Switch to Protection - Span	25161
UNIDENTIFIED	Forced Switch Back to Working - Ring	25162
UNIDENTIFIED	Forced Switch Back to Working - Span	25163
UNIDENTIFIED	Forced Switch to Protection - Ring	25164
UNIDENTIFIED	Forced Switch to Protection - Span	25165
UNIDENTIFIED	Lockout of Protection - Ring	25166
UNIDENTIFIED	Lockout of Protection - Span	25167
UNIDENTIFIED	Lockout of Working - Ring	25168
UNIDENTIFIED	Lockout of Working - Span	25169
UNIDENTIFIED	Ring Is Squelching Traffic	25170
FOP_APS	Inconsistent APS Code	25171
FOP_APS	Node ID Mismatch	25172
FOP_APS	Default K Byte	25173
FOP_APS	Connection Loss	25174
EQPT	TCC A to Shelf Slot 1 (DROP 1) Communication Failure	25175
EQPT	TCC A to Shelf Slot 2 (DROP 2) Communication Failure	25176
EQPT	TCC A to Shelf Slot 3 (DROP 3) Communication Failure	25177
EQPT	TCC A to Shelf Slot 4 (DROP 4) Communication Failure	25178
EQPT	TCC A to Shelf Slot 5 (TRUNK 1) Communication Failure	25179
EQPT	TCC A to Shelf Slot 6 (TRUNK 2) Communication Failure	25180
EQPT	TCC A to Shelf Slot 7 (TCC A) Communication Failure	25181
EQPT	TCC A to Shelf Slot 8 (XCON A) Communication Failure	25182
EQPT	TCC A to Shelf Slot 9 (AIC) Communication Failure	25183
EQPT	TCC A to Shelf Slot 10 (XCON B) Communication Failure	25184
EQPT	TCC A to Shelf Slot 11 (TCC B) Communication Failure	25185
EQPT	TCC A to Shelf Slot 12 (TRUNK 3) Communication Failure	25186
EQPT	TCC A to Shelf Slot 13 (TRUNK 4) Communication Failure	25187
EQPT	TCC A to Shelf Slot 14 (DROP 5) Communication Failure	25188
EQPT	TCC A to Shelf Slot 15 (DROP 6) Communication Failure	25189
EQPT	TCC A to Shelf Slot 16 (DROP 7) Communication Failure	25190
EQPT	TCC A to Shelf Slot 17 (DROP 8) Communication Failure	25191
EQPT	TCC A to DCC A Processor Communication Failure	25192
EQPT	TCC B to Shelf Slot 1 (DROP 1) Communication Failure	25193
EQPT	TCC B to Shelf Slot 2 (DROP 2) Communication Failure	25194
EQPT	TCC B to Shelf Slot 3 (DROP 3) Communication Failure	25195
EQPT	TCC B to Shelf Slot 4 (DROP 4) Communication Failure	25196
EQPT	TCC B to Shelf Slot 5 (TRUNK 1) Communication Failure	25197
EQPT	TCC B to Shelf Slot 6 (TRUNK 2) Communication Failure	25198
EQPT	TCC B to Shelf Slot 7 (TCC A) Communication Failure	25199
EQPT	TCC B to Shelf Slot 8 (XCON A) Communication Failure	25200
EQPT	TCC B to Shelf Slot 9 (AIC) Communication Failure	25201
EQPT	TCC B to Shelf Slot 10 (XCON B) Communication Failure	25202
EQPT	TCC B to Shelf Slot 11 (TCC B) Communication Failure	25203
EQPT	TCC B to Shelf Slot 12 (TRUNK 3) Communication Failure	25204
EQPT	TCC B to Shelf Slot 13 (TRUNK 4) Communication Failure	25205
EQPT	TCC B to Shelf Slot 14 (DROP 5) Communication Failure	25206
EQPT	TCC B to Shelf Slot 15 (DROP 6) Communication Failure	25207
EQPT	TCC B to Shelf Slot 16 (DROP 7) Communication Failure	25208
EQPT	TCC B to Shelf Slot 17 (DROP 8) Communication Failure	25209
EQPT	TCC B to DCC B Processor Communication Failure	25210
UNIDENTIFIED	Fast Start Synchronization Mode	25211
FOP_APS	Improper APS Code	25212
UNIDENTIFIED	BLSR out of Sync	25213
AIS	Alarm Indication Signal - VT	25214
RAI	Remote Failure Indication - VT	25215
PLM	Signal Label Mismatch Failure - Payload Label Mismatch - VT	25216
UNEQ	Signal Label Mismatch Failure - Unequipped - VT	25217
UNIDENTIFIED	Peer State Mismatch	25218
EQPT	Facility Termination Equipment - Receiver Missing	25219
EQPT	Facility Termination Equipment - Transmitter Missing	25220
LOP	Loss of Pointer - VT	25221
UNIDENTIFIED	Embedded Operations Channel Failure - Link Down	25222
UNIDENTIFIED	Failed to Receive Synchronization Status Message	25223
UNIDENTIFIED	Synchronization Status Messages are Disabled on this Interface	25224
UNIDENTIFIED	Primary Reference Source - Stratum 1 Traceable	25225
UNIDENTIFIED	Synchronized - Traceability Unknown	25226
UNIDENTIFIED	Stratum 2 Traceable	25227
UNIDENTIFIED	Transit Node Clock Traceable	25228
UNIDENTIFIED	Stratum 3E Traceable	25229
UNIDENTIFIED	Stratum 3 Traceable	25230
UNIDENTIFIED	SONET Minimum Clock Traceable	25231
UNIDENTIFIED	Stratum 4 Traceable	25232
UNIDENTIFIED	Do Not Use for Synchronization	25233
UNIDENTIFIED	Reserved for Network Synchronization Use	25234
UNIDENTIFIED	Failure to Switch to Protection - Path	25235
UNIDENTIFIED	Manual Switch of Working Facility - Equipment to Protection - Path	25236
UNIDENTIFIED	Working Facility - Equipment Forced to Switch to Protection - Path	25237
UNIDENTIFIED	Lockout of Protection - Path	25238
UNIDENTIFIED	Automatic UPSR Switch caused by AIS	25239
UNIDENTIFIED	Automatic UPSR Switch caused by LOP	25240
UNIDENTIFIED	Automatic UPSR Switch caused by UNEQ	25241
UNIDENTIFIED	Automatic UPSR Switch caused by PDI	25242
UNIDENTIFIED	Automatic UPSR Switch caused by SFBER	25243
UNIDENTIFIED	Automatic UPSR Switch caused by SDBER	25244
UNIDENTIFIED	DS3 Idle Condition	25245
UNIDENTIFIED	DS1 Loopback due to FEAC Command	25246
UNIDENTIFIED	DS1 Loopback Command Sent to Far End	25247
UNIDENTIFIED	DS3 Loopback due to FEAC Command	25248
UNIDENTIFIED	DS3 Loopback Command Sent to Far End	25249
UNIDENTIFIED	DS2 Loopback due to Far End Command	25250
UNIDENTIFIED	DS2 Loopback Command Sent to Far End	25251
ENV	Far End AIS	25252
UNIDENTIFIED	Far End Multiple DS1 LOS Detected on DS3	25253
ENV	Far End DS1 Equipment Failure - Non-Service Affecting	25254
ENV	Far End DS1 Equipment Failure - Service Affecting	25255
ENV	Far End Single DS1 LOS	25256
ENV	Far End DS3 Equipment Failure - Non-Service Affecting	25257
ENV	Far End DS3 Equipment Failure - Service Affecting	25258
ENV	Far End Common Equipment Failure - Non-Service Affecting	25259
UNIDENTIFIED	Far End IDLE	25260
ENV	Far End LOS	25261
ENV	Far End LOF	25262
UNIDENTIFIED	Performance Monitor Threshold Crossing Alert	25263
UNIDENTIFIED	Ethernet Bridge is New Root of Spanning Tree	25264
UNIDENTIFIED	Ethernet Bridge Topology Change	25265
UNIDENTIFIED	BLSR Tables Resynchronized	25266
ENV	System Reboot	25267
UNIDENTIFIED	Manual Switch Request on Facility - Equipment	25268
UNIDENTIFIED	Forced Switch Request on Facility or Equipment	25269
UNIDENTIFIED	Lockout Switch Request on Facility - Equipment	25270
UNIDENTIFIED	RMON Histories and Alarms Reset Reboot	25271
UNIDENTIFIED	RMON Alarm	25272
LOS	Video Interface Card Loss of Video IF Signal	25273
LOS	VIC Loss of Video Baseband Signal	25274
LOS	VIC Loss of Audio FM Signal	25275
LOS	VIC Loss of Audio Baseband Channel 1 Signal	25276
LOS	VIC Loss of Audio Baseband Channel 2 Signal	25277
LOS	VIC Loss of Audio Baseband Channel 3 Signal	25278
LOS	VIC Loss of Audio Baseband Channel 4 Signal	25279
TIM	STS Path Trace Identifier Mismatch	25280
ENV	NE Power Failure at Connector A	25281
ENV	NE Power Failure at Connector B	25282
UNIDENTIFIED	Free Memory on Card Very Low	25283
UNIDENTIFIED	Free Memory on Card Near Zero	25284
UNIDENTIFIED	Exercise Request on Ring	25285
UNIDENTIFIED	Exercise Request on Span	25286
UNIDENTIFIED	Squelching Path	25287
UNIDENTIFIED	Extra Traffic Preempted	25288
UNIDENTIFIED	Far End LockOut of Working - Ring	25289
UNIDENTIFIED	Far End LockOut of Working - Span	25290
UNIDENTIFIED	Far End Lockout of Protection - Ring	25291
UNIDENTIFIED	Far End Lockout of Protection - All Spans	25292
UNIDENTIFIED	Far End Working Facility Forced to Switch to Protection - Ring	25293
UNIDENTIFIED	Far End Working Facility Forced to Switch to Protection - Span	25294
UNIDENTIFIED	Far End Manual Switch of Working Facility to Protection- Ring	25295
UNIDENTIFIED	Far End Manual Switch of Working Facility to Protection- Span	25296
UNIDENTIFIED	Far End Exercising Ring	25297
UNIDENTIFIED	Far End Exercising Span	25298
ENV	Far End BER Threshold Passed for Signal Failure - Ring	25299
ENV	Far End BER Threshold Passed for Signal Failure - Span	25300
ENV	Far End BER Threshold Passed for Signal Degrade - Ring	25301
ENV	Far End BER Threshold Passed for Signal Degrade - Span	25302
ENV	APS Channel - Far End Protection Line Signal Degrade	25303
UNIDENTIFIED	Ring Switch Is Active on the East Side	25304
UNIDENTIFIED	Ring Switch Is Active on the West Side	25305
UNIDENTIFIED	Span Switch Is Active on the East Side	25306
UNIDENTIFIED	Span Switch Is Active on the West Side	25307
UNIDENTIFIED	Unidirectional Full Pass-Through is Active	25308
UNIDENTIFIED	Bidirectional Full Pass-Through is Active	25309
UNIDENTIFIED	K Bytes Pass-Through is Active	25310
UNIDENTIFIED	Ring is Segmented	25311
UNIDENTIFIED	Ring Topology is Under Construction	25312
UNIDENTIFIED	Lockout of Protection - All Spans	25313
UNIDENTIFIED	Far End of Fiber is provisioned with Different Ring ID	25314
UNIDENTIFIED	Both Ends of Fiber provisioned as East or Both as West	25315
SECURITY_VIOLATION	Securit - Invalid Login - See Audit Trail	25316
UNIDENTIFIED	Autonomous Messages Inhibited	25317
UNIDENTIFIED	Traffic Storm on LAN; LAN Temporarily Disabled	25318
UNIDENTIFIED	REPT^DBCHG Messages Inhibited	25319
SECURITY_VIOLATION	Security - User ID Has Expired	25320
EQPT	Partial Fan Failure	25321
UNIDENTIFIED	Force Switch Request on Ring	25322
UNIDENTIFIED	Force Switch Request on Span	25323
UNIDENTIFIED	Lockout Switch Request on Ring	25324
UNIDENTIFIED	Lockout Switch Request on Span	25325
UNIDENTIFIED	Manual Switch Request on Ring	25326
UNIDENTIFIED	Manual Switch Request on Span	25327
EQPT	Peer-to-Peer Slot Communication Failure	25328
EQPT	Peer-to-Peer Slot Communication Failure	25329
EQPT	TCC A to Shelf Slot Communication Failure	25330
EQPT	TCC B to Shelf Slot Communication Failure	25331
EQPT	Interconnection Equipment Failure - Working XC Payload Bus	25332
EQPT	Interconnection Equipment Failure - Protect XC Payload Bus	25333
EQPT	Inhibit Switch To Protect Request on Equipment	25334
EQPT	Inhibit Switch to Working Request on Equipment	25335
BER_SD	BER Threshold Exceeded for Signal Degrade - Line	25336
BER_SD	BER Threshold Exceeded for Signal Degrade - Path	25337
BER_SF	BER Threshold Exceeded for Signal Failure - Line	25338
BER_SF	BER Threshold Exceeded for Signal Failure - Path	25339
UNIDENTIFIED	Exercising Ring Successfully	25340
UNIDENTIFIED	Exercising Span Successfully	25341
UNIDENTIFIED	Span is in Wait to Restore State	25342
EQPT	Peer Card Not Responding	25343
UNIDENTIFIED	Exercise Request on Ring Failed	25344
UNIDENTIFIED	Exercise Request on Span Failed	25345
UNIDENTIFIED	Far End Lockout of Protection - Span	25346
EQPT	Manufacturing Data Memory (EEPROM) Failure	25347
EQPT	Replaceable Equipment/Unit is Missing	25348
ENV	Software Download Failure	25349
TIM	TIM Section - Trace Identifier Mismatch Failure	25350
AIS	AIS - Multiplex Section - Alarm Indication Signal	25351
RAI	RFI - Multiplex Section - Remote Failure/Alarm Indication	25352
TIM	TIM High Order - Trace Identifier Mismatch Failure	25353
AU_AIS	AIS - Administration Unit - Alarm Indication Signal	25354
LOP	LOP - Administration Unit - Loss of Pointer	25355
UNEQ	SLMF - Unequipped High Order - Path Unequipped	25356
PLM	SLMF - PLM High Order - Path Label Mismatch	25357
RAI	RFI - High Order - Remote Failure/Alarm Indication	25358
LOP	LOP - Tributary Unit - Loss of Pointer	25359
TU-AIS	AIS - Tributary Unit - Alarm Indication Signal	25360
UNEQ	SLMF - Unequipped Low Order - Path Unequipped	25361
PLM	SLMF - PLM Low Order - Path Label Mismatch	25362
TIM	TIM Low Order - Trace Identifier Mismatch Failure	25363
RAI	RFI - Low Order - Remote Failure/Alarm Indication	25364
UNIDENTIFIED	G811 - Primary Reference Clock Traceable	25365
UNIDENTIFIED	G812 - Transit Node Clock Traceable	25366
UNIDENTIFIED	G812 - Local Node Clock Traceable	25367
UNIDENTIFIED	G813 - Synchronous Equipment Timing Source Traceable	25368
UNIDENTIFIED	E1 Loopback due to FEAC Command	25369
UNIDENTIFIED	E1 Loopback Command Sent to Far End	25370
UNIDENTIFIED	E3 Loopback due to FEAC Command	25371
ENV	Far End Multiple E1 LOS Detected on E3	25372
ENV	Far End E1 Equipment Failure Non-Service Affecting	25373
ENV	Far End E1 Equipment Failure Service Affecting	25374
ENV	Far End Single E1 LOS	25375
ENV	Far End E3 Equipment Failure Service Affecting	25376
UNIDENTIFIED	E3 Loopback Command Sent to Far End	25377
ENV	Far End E3 Equipment Failure Non-Service Affecting	25378
ENV	Low Voltage - Battery A	25379
ENV	High Voltage - Battery A	25380
ENV	Low Voltage - Battery B	25381
ENV	High Voltage - Battery B	25382
UNIDENTIFIED	Procedural Error - MS-SP Ring out of Sync	25383
UNIDENTIFIED	MS-SP Ring Tables Resynchronized	25384
UNIDENTIFIED	Automatic SNCP Switch caused by AIS	25385
UNIDENTIFIED	Automatic SNCP Switch caused by LOP	25386
UNIDENTIFIED	Automatic SNCP Switch caused by UNEQ	25387
UNIDENTIFIED	Automatic SNCP Switch caused by PDI	25388
UNIDENTIFIED	Automatic SNCP Switch caused by SFBER	25389
UNIDENTIFIED	Automatic SNCP Switch caused by SDBER	25390
UNIDENTIFIED	STM Concatenation Error	25391
UNIDENTIFIED	E3 Idle Condition	25392
UNIDENTIFIED	IOS Config Copy Failed	25393
UNIDENTIFIED	IOS Config Copy In Progress	25394
UNIDENTIFIED	Alarms Suppressed by User Command	25399
UNIDENTIFIED	Alarms Suppressed for Maintenance	25400
UNIDENTIFIED	N/A	25401
UNIDENTIFIED	Synchronization Reference Frequency Out of Bounds	25402
UNIDENTIFIED	Ether Tx Excess Flow Ctrl	25403
UNIDENTIFIED	Ether Tx Oversubscribed	25404
UNIDENTIFIED	Transport Layer Failure	25405
UNIDENTIFIED	Ether Rx Excess Flow Ctrl	25406
UNIDENTIFIED	Ether Rx Oversubscribed	25407
UNIDENTIFIED	Ether Tx Underrun	25408
UNIDENTIFIED	SNTP Host Failure	25409
UNIDENTIFIED	DS3 Frame Format Mismatch	25410
UNIDENTIFIED	Alarms/Events Suppressed for this Object	25411
BER_SD	BER Threshold Exceeded for Signal Degrade - High Order	25412
BER_SF	BER Threshold Exceeded for Signal Failure - High Order	25413
BER_SD	BER Threshold Exceeded for Signal Degrade - Low Order	25414
BER_SF	BER Threshold Exceeded for Signal Failure - Low Order	25415
UNIDENTIFIED	Failure to Switch to Protection - High Order Path	25416
UNIDENTIFIED	Failure to Switch to Protection - Low Order Path	25417
UNIDENTIFIED	Wait to Restore	25418
ENV	Extreme High Voltage - Battery A	25419
ENV	Extreme Low Voltage - Battery A	25420
ENV	Extreme High Voltage - Battery B	25421
ENV	Extreme Low Voltage - Battery B	25422
UNIDENTIFIED	Switching Matrix Module Failure	25423
UNIDENTIFIED	Signaling Unable to Set Up Circuit	25424
UNIDENTIFIED	RSVP Hello FSM to Neighbor Down	25425
UNIDENTIFIED	LMP Hello FSM to Control Channel Down	25426
UNIDENTIFIED	LMP Neighbor Discovery Has Failed	25427
UNIDENTIFIED	Unauthorized Incoming Signaling Request	25428
UNIDENTIFIED	Signaled Circuit Going Down	25429
UNIDENTIFIED	Autonomous PM Report Message Inhibited	25430
EQPT	I/O Slot to XCON Communication Failure	25431
UNIDENTIFIED	Forced Switch to Primary Reference	25432
UNIDENTIFIED	Forced Switch to Secondary Reference	25433
UNIDENTIFIED	Forced Switch to Third Reference	25434
UNIDENTIFIED	Forced Switch to Internal Clock	25435
LOM	LOF - Administration Unit - Loss of Multi Frame	25436
UNIDENTIFIED	Admin Logout of User	25438
UNIDENTIFIED	User Locked Out	25439
UNIDENTIFIED	Admin Lockout of User	25440
UNIDENTIFIED	Admin Lockout Clear	25441
SECURITY_VIOLATION	Security - Invalid Login - Username - See Audit Log	25442
SECURITY_VIOLATION	Security - Invalid Login - Password - See Audit Log	25443
SECURITY_VIOLATION	Security - Invalid Login - Locked Out - See Audit Log	25444
SECURITY_VIOLATION	Security - Invalid Login - Already Logged On - See Audit Log	25445
UNIDENTIFIED	Login of User	25446
UNIDENTIFIED	Automatic Logout of Idle User	25447
UNIDENTIFIED	Logout of User	25448
UNIDENTIFIED	Cross-connect Loopback	25451
UNIDENTIFIED	Error in Startup Config	25454
UNIDENTIFIED	No Startup Config	25455
EQPT	Laser Approaching End of Life	25456
UNIDENTIFIED	Database Backup Failed	25457
UNIDENTIFIED	Database Restore Failed	25458
UNIDENTIFIED	8B10B out of Sync	25459
AIS	ODUk - Alarm Indication Signal	25460
AIS	OTUk - Alarm Indication Signal	25461
UNIDENTIFIED	OTUk - Backward Defect Indicator	25462
UNIDENTIFIED	ODUk - Backward Defect Indicator	25463
UNIDENTIFIED	FEC Uncorrected Word	25464
UNIDENTIFIED	GCC Embedded Operation Channel Failure	25465
UNIDENTIFIED	OTUk - Incoming Alignment Error	25466
UNIDENTIFIED	ODUk- Locked Defect - PM	25467
LOM	Loss of Multi-Frame	25468
UNIDENTIFIED	ODUk - Open Connection Indication	25469
PLM	Payload Type Identifier Mismatch	25470
TIM	ODUk - Trail Trace Identifier Mismatch	25471
TIM	OTUk - Trail Trace Identifier Mismatch	25472
EQPT	Equipment High Laser Bias	25473
EQPT	Equipment High Laser Temp	25474
EQPT	Equipment High Laser Peltier	25475
EQPT	Equipment High Rx Power	25476
EQPT	Equipment High Tx Power	25477
EQPT	Equipment High Rx Temperature	25478
EQPT	Equipment Low Tx Temperature	25479
EQPT	Equipment High Transceiver Voltage	25480
EQPT	Equipment Low Laser Bias	25481
EQPT	Equipment Low Laser Temp	25482
EQPT	Equipment Low Laser Peltier	25483
EQPT	Equipment Low Rx Power	25484
EQPT	Equipment Low Tx Power	25485
EQPT	Equipment Low Transceiver Voltage	25486
EQPT	Equipment Rx Locked	25487
EQPT	Equipment Squelched	25488
EQPT	Equipment Tx Locked	25489
BER_SF	OTUk - Signal Failure	25490
BER_SF	ODUk - Signal Failure	25491
BER_SD	OTUk - Signal Degrade	25492
BER_SD	ODUk - Signal Degrade	25493
UNIDENTIFIED	Pluggable Port Missing	25494
UNIDENTIFIED	Pluggable Port Rate Mismatch	25495
SECURITY_VIOLATION	Pluggable Port Security Code Mismatch	25496
UNIDENTIFIED	Tci Not Selected	25497
UNIDENTIFIED	Tci 1 Clock Failure	25498
UNIDENTIFIED	ODUk - Backward Defect Indicator	25499
UNIDENTIFIED	ODUk - Backward Defect Indicator	25500
UNIDENTIFIED	ODUk - Backward Defect Indicator	25501
UNIDENTIFIED	ODUk - Open Connection Indication	25504
UNIDENTIFIED	ODUk - Locked Defect - TCM2	25505
AIS	ODUk - Alarm Indication Signal	25506
TIM	ODUk - Trail Trace Identifier Mismatch	25507
BER_SD	ODUk - Signal Degrade - TCM2	25508
BER_SF	ODUk - Signal Failure - TCM2	25509
UNIDENTIFIED	ODUk - Open Connection Indication	25510
UNIDENTIFIED	ODUk - Locked Defect - TCM1	25511
AIS	ODUk - Alarm Indication Signal	25512
TIM	ODUk - Trail Trace Identifier Mismatch	25513
BER_SD	ODUk - Signal Degrade - TCM1	25514
BER_SF	ODUk - Signal Failure - TCM1	25515
LOF	OTUk - Loss of Frame	25516
UNIDENTIFIED	Tci 2 Clock Failure	25517
UNIDENTIFIED	Audit Log 80 Percent Full	25518
UNIDENTIFIED	Module Communication Failure	25519
UNIDENTIFIED	Need to Save Running Config	25520
UNIDENTIFIED	Audit Log 100 Percent Full - Oldest Records will be Lost	25521
UNIDENTIFIED	Standby Database out of Sync	25522
EQPT	Redundant Power Capability Lost	25523
EQPT	Equipment Wavelength Mismatch	25524
UNIDENTIFIED	DSP Communication Failure	25525
UNIDENTIFIED	DSP Failure	25526
UNIDENTIFIED	Loss of Channel	25527
UNIDENTIFIED	FEC Mismatch	25528
UNIDENTIFIED	LAN Connection Polarity Reversed	25529
UNIDENTIFIED	Enhanced Remote Failure Indication - Path - Server	25530
UNIDENTIFIED	Enhanced Remote Failure Indication - Path - Connectivity	25531
UNIDENTIFIED	Enhanced Remote Failure Indication - Path - Payload	25532
SECURITY_VIOLATION	Security Violation Detected	25533
UNIDENTIFIED	Syslog Messages	28000
UNIDENTIFIED	Configuration Events	28001
UNIDENTIFIED	LinkUp/LinkDown Trap	28002
UNIDENTIFIED	Cold/Warn Start Trap	28003
SECURITY_VIOLATION	Authentication Failure Notification	28004

A.5.8  CTM GateWay/CORBA Mapping—ONS 15310 CL, ONS15327, ONS 15454 SONET, and ONS 15454 SDH R5.0

Table A-23 lists the CTM GateWay/CORBA mapping for the ONS 15310 CL, ONS 15327, ONS 15454 SONET, and ONS 15454 SDH Release 5.0.

Table A-23 CTM GateWay/CORBA Mapping for the ONS 15310 CL, ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R5.0 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	Normal Condition	25000
ENV	Failure Detected External to the NE	25001
ENV	External Error	25002
UNIDENTIFIED	Excessive Switching	25003
UNIDENTIFIED	Incoming Failure Condition	25004
AIS	Alarm Indication Signal	25005
AIS	Alarm Indication Signal - Line	25006
AIS	Alarm Indication Signal - Path	25007
FOP_APS	APS Channel Failure	25008
FOP_APS	Byte Failure	25009
FOP_APS	Protection Switching Channel Match Failure	25010
FOP_APS	Automatic Protection Switch Mode Mismatch	25011
FOP_APS	Far End Protection Line Failure	25012
UNIDENTIFIED	Bipolar Violation	25013
UNIDENTIFIED	Carrier Loss on the LAN	25014
UNIDENTIFIED	STS Concatenation Error	25015
UNIDENTIFIED	Excess Collisions on the LAN	25016
UNIDENTIFIED	Facility Failure	25017
UNIDENTIFIED	Far End Block Error	25018
LOF	Loss of Frame	25019
LOP	Loss of Pointer	25020
LOP	Loss of Pointer - Path	25021
LOS	Loss of Signal	25022
UNIDENTIFIED	Out of Frame	25023
UNIDENTIFIED	Path Selector Failure	25024
RAI	Remote Alarm Indication	25025
RAI	Remote Failure Indication	25026
RAI	Remote Failure Indication - Line	25027
RAI	Remote Failure Indication - Path	25028
BER_SD	Signal Degrade	25029
UNIDENTIFIED	Severely Errored Frame	25030
UNIDENTIFIED	Invalid Alarm	25031
BER_SF	Signal Failure	25032
UNIDENTIFIED	Signal Label Mismatch Failures	25033
UNIDENTIFIED	Payload Defect Indication	25034
UNIDENTIFIED	Payload Defect Indication - Path	25035
PLM	Payload Label Mismatch - Path	25036
UNEQ	Unequipped - Path	25037
UNIDENTIFIED	Loss of Synchronization	25038
UNIDENTIFIED	Out of Synchronization	25039
UNIDENTIFIED	Primary Synchronization Reference Failure	25040
UNIDENTIFIED	Secondary Synchronization Reference Failure	25041
UNIDENTIFIED	Third Synchronization Reference Failure	25042
UNIDENTIFIED	Fourth Synchronization Reference Failure	25043
UNIDENTIFIED	Fifth Synchronization Reference Failure	25044
UNIDENTIFIED	Sixth Synchronization Reference Failure	25045
UNIDENTIFIED	Outgoing Failure Condition	25046
RAI	Remote Defect Indication - Line	25047
RAI	Remote Defect Indication - Path	25048
UNIDENTIFIED	Free Running Synchronization Mode	25049
UNIDENTIFIED	Holdover Synchronization mode	25050
EQPT	Internal Fault	25051
UNIDENTIFIED	Internal Error	25052
UNIDENTIFIED	Internal Message Error	25053
UNIDENTIFIED	Mismatch of Equipment and Attributes	25054
UNIDENTIFIED	Watchdog Timer Timeout	25055
ENV	Software Fault or Failure	25056
ENV	Software Fault - Data Integrity Fault	25057
UNIDENTIFIED	Program Failure	25058
EQPT	Control Equipment Failure	25059
EQPT	Control Processor Failure	25060
EQPT	Working Memory Failure	25061
EQPT	Interconnection Equipment Failure	25062
EQPT	Time Slot Interchange Equipment Failure	25063
EQPT	Equipment Failure	25064
EQPT	High Temperature	25065
EQPT	Facility Termination Equipment Failure	25066
EQPT	Automatic Laser Shutdown	25067
UNIDENTIFIED	Failure to Release From Protection	25068
EQPT	Receiver Failure	25069
EQPT	Transmit Failure	25070
UNIDENTIFIED	Failure to Switch to Protection	25071
UNIDENTIFIED	Equipment Unit Plug-In	25072
UNIDENTIFIED	Internal Power Failure	25073
UNIDENTIFIED	Fuse Alarm	25074
UNIDENTIFIED	Synchronization Unit Failure	25075
UNIDENTIFIED	Synchronization Switching Equipment Failure	25076
EQPT	Equipment Unit Unplugged	25077
EQPT	Manually Caused Abnormal Condition	25078
UNIDENTIFIED	Manual Alarm Cutoff	25079
UNIDENTIFIED	Procedural Error	25080
EQPT	Improper Removal	25081
UNIDENTIFIED	Protection Unit Not Available	25082
UNIDENTIFIED	Protection Switch	25083
UNIDENTIFIED	Recovery or Service Protection Action Has been Initiated	25084
UNIDENTIFIED	Automatic System Reset	25085
UNIDENTIFIED	Cold Restart	25086
UNIDENTIFIED	Forced Switch Back to Working	25087
UNIDENTIFIED	Forced Switch to Protection	25088
UNIDENTIFIED	Initialization Initiated	25089
UNIDENTIFIED	Lockout of Protection	25090
UNIDENTIFIED	Lockout of Working	25091
UNIDENTIFIED	Manual System Reset	25092
UNIDENTIFIED	Manual Switch to Internal Clock	25093
UNIDENTIFIED	Manual Switch to Primary Reference	25094
UNIDENTIFIED	Manual Switch to Secondary Reference	25095
UNIDENTIFIED	Manual Switch to Third Reference	25096
UNIDENTIFIED	Manual Switch to Fourth Reference	25097
UNIDENTIFIED	Manual Switch to Fifth Reference	25098
UNIDENTIFIED	Manual Switch to Sixth Reference	25099
UNIDENTIFIED	Manual Switch Back to Working	25100
UNIDENTIFIED	Manual Switch to Protection	25101
UNIDENTIFIED	Powerfail Restart	25102
UNIDENTIFIED	Software Download In Progress	25103
UNIDENTIFIED	Switch to Internal Clock	25104
UNIDENTIFIED	Switch to Primary Reference	25105
UNIDENTIFIED	Switch to Secondary Reference	25106
UNIDENTIFIED	Switch to Third Reference	25107
UNIDENTIFIED	Switch to Fourth Reference	25108
UNIDENTIFIED	Switch to Fifth Reference	25109
UNIDENTIFIED	Switch to Sixth Reference	25110
UNIDENTIFIED	Switched Back to Working	25111
UNIDENTIFIED	Switched to Protection	25112
UNIDENTIFIED	Warm Restart	25113
UNIDENTIFIED	Ring is in Wait to Restore State	25114
EQPT	Primary Nonvolatile Backup Memory Failure	25115
EQPT	Secondary Nonvolatile Backup Memory Failure	25116
EQPT	Control Bus Failure	25117
EQPT	Control Communications Equipment Failure	25118
UNIDENTIFIED	Loopback	25119
UNIDENTIFIED	Loopback, Network	25120
UNIDENTIFIED	Loopback, Terminal	25121
EQPT	Fan Failure	25122
DCC_FAILURE	SDCC Termination Failure	25123
UNIDENTIFIED	Loopback Facility	25124
EQPT	Payload Bus Failure to I/O Slot 1 (XCON Slot 8)	25125
EQPT	Payload Bus Failure to I/O Slot 2 (XCON Slot 8)	25126
EQPT	Payload Bus Failure to I/O Slot 3 (XCON Slot 8)	25127
EQPT	Payload Bus Failure to I/O Slot 4 (XCON Slot 8)	25128
EQPT	Payload Bus Failure to I/O Slot 5 (XCON Slot 8)	25129
EQPT	Payload Bus Failure to I/O Slot 6 (XCON Slot 8)	25130
EQPT	Payload Bus Failure to I/O Slot 12 (XCON Slot 8)	25131
EQPT	Payload Bus Failure to I/O Slot 13 (XCON Slot 8)	25132
EQPT	Payload Bus Failure to I/O Slot 14 (XCON Slot 8)	25133
EQPT	Payload Bus Failure to I/O Slot 15 (XCON Slot 8)	25134
EQPT	Payload Bus Failure to I/O Slot 16 (XCON Slot 8)	25135
EQPT	Payload Bus Failure to I/O Slot 17 (XCON Slot 8)	25136
EQPT	Payload Bus Failure to I/O Slot 1 (XCON Slot 10)	25137
EQPT	Payload Bus Failure to I/O Slot 2 (XCON Slot 10)	25138
EQPT	Payload Bus Failure to I/O Slot 3 (XCON Slot 10)	25139
EQPT	Payload Bus Failure to I/O Slot 4 (XCON Slot 10)	25140
EQPT	Payload Bus Failure to I/O Slot 5 (XCON Slot 10)	25141
EQPT	Payload Bus Failure to I/O Slot 6 (XCON Slot 10)	25142
EQPT	Payload Bus Failure to I/O Slot 12 (XCON Slot 10)	25143
EQPT	Payload Bus Failure to I/O Slot 13 (XCON Slot 10)	25144
EQPT	Payload Bus Failure to I/O Slot14 (XCON Slot 10)	25145
EQPT	Payload Bus Failure to I/O Slot15 (XCON Slot 10)	25146
EQPT	Payload Bus Failure to I/O Slot16 (XCON Slot 10)	25147
EQPT	Payload Bus Failure to I/O Slot17(XCON Slot 10)	25148
EQPT	Control Bus 1 Failure	25149
EQPT	Control Bus 2 Failure	25150
EQPT	Invalid MAC Address	25151
EQPT	Board Failure	25152
EQPT	Diagnostics Failure	25153
EQPT	Medium Access Control Failure	25154
UNIDENTIFIED	Duplicate Node ID	25155
UNIDENTIFIED	Failure to Switch to Protection - Ring	25156
UNIDENTIFIED	Failure to Switch to Protection - Span	25157
UNIDENTIFIED	Manual Switch Back to Working - Ring	25158
UNIDENTIFIED	Manual Switch Back to Working - Span	25159
UNIDENTIFIED	Manual Switch to Protection - Ring	25160
UNIDENTIFIED	Manual Switch to Protection - Span	25161
UNIDENTIFIED	Forced Switch Back to Working - Ring	25162
UNIDENTIFIED	Forced Switch Back to Working - Span	25163
UNIDENTIFIED	Forced Switch to Protection - Ring	25164
UNIDENTIFIED	Forced Switch to Protection - Span	25165
UNIDENTIFIED	Lockout of Protection - Ring	25166
UNIDENTIFIED	Lockout of Protection - Span	25167
UNIDENTIFIED	Lockout of Working - Ring	25168
UNIDENTIFIED	Lockout of Working - Span	25169
UNIDENTIFIED	Ring is Squelching Traffic	25170
FOP_APS	Inconsistent APS Code	25171
FOP_APS	Node ID Mismatch	25172
FOP_APS	Default K Byte	25173
FOP_APS	Connection Loss	25174
EQPT	TCC A to Shelf Slot 1 (DROP 1) Communication Failure	25175
EQPT	TCC A to Shelf Slot 2 (DROP 2) Communication Failure	25176
EQPT	TCC A to Shelf Slot 3 (DROP 3) Communication Failure	25177
EQPT	TCC A to Shelf Slot 4 (DROP 4) Communication Failure	25178
EQPT	TCC A to Shelf Slot 5 (TRUNK 1) Communication Failure	25179
EQPT	TCC A to Shelf Slot 6 (TRUNK 2) Communication Failure	25180
EQPT	TCC A to Shelf Slot 7 (TCC A) Communication Failure	25181
EQPT	TCC A to Shelf Slot 8 (XCON A) Communication Failure	25182
EQPT	TCC A to Shelf Slot 9 (AIC) Communication Failure	25183
EQPT	TCC A to Shelf Slot 10 (XCON B) Communication Failure	25184
EQPT	TCC A to Shelf Slot 11 (TCC B) Communication Failure	25185
EQPT	TCC A to Shelf Slot 12 (TRUNK 3) Communication Failure	25186
EQPT	TCC A to Shelf Slot 13 (TRUNK 4) Communication Failure	25187
EQPT	TCC A to Shelf Slot 14 (DROP 5) Communication Failure	25188
EQPT	TCC A to Shelf Slot 15 (DROP 6) Communication Failure	25189
EQPT	TCC A to Shelf Slot 16 (DROP 7) Communication Failure	25190
EQPT	TCC A to Shelf Slot 17 (DROP 8) Communication Failure	25191
EQPT	TCC A to DCC A Processor Communication Failure	25192
EQPT	TCC B to Shelf Slot 1 (DROP 1) Communication Failure	25193
EQPT	TCC B to Shelf Slot 2 (DROP 2) Communication Failure	25194
EQPT	TCC B to Shelf Slot 3 (DROP 3) Communication Failure	25195
EQPT	TCC B to Shelf Slot 4 (DROP 4) Communication Failure	25196
EQPT	TCC B to Shelf Slot 5 (TRUNK 1) Communication Failure	25197
EQPT	TCC B to Shelf Slot 6 (TRUNK 2) Communication Failure	25198
EQPT	TCC B to Shelf Slot 7 (TCC A) Communication Failure	25199
EQPT	TCC B to Shelf Slot 8 (XCON A) Communication Failure	25200
EQPT	TCC B to Shelf Slot 9 (AIC) Communication Failure	25201
EQPT	TCC B to Shelf Slot 10 (XCON B) Communication Failure	25202
EQPT	TCC B to Shelf Slot 11 (TCC B) Communication Failure	25203
EQPT	TCC B to Shelf Slot 12 (TRUNK 3) Communication Failure	25204
EQPT	TCC B to Shelf Slot 13 (TRUNK 4) Communication Failure	25205
EQPT	TCC B to Shelf Slot 14 (DROP 5) Communication Failure	25206
EQPT	TCC B to Shelf Slot 15 (DROP 6) Communication Failure	25207
EQPT	TCC B to Shelf Slot 16 (DROP 7) Communication Failure	25208
EQPT	TCC B to Shelf Slot 17 (DROP 8) Communication Failure	25209
EQPT	TCC B to DCC B Processor Communication Failure	25210
UNIDENTIFIED	Fast Start Synchronization Mode	25211
FOP_APS	Improper APS Code	25212
UNIDENTIFIED	BLSR out of Sync	25213
AIS	Alarm Indication Signal - VT	25214
RAI	Remote Failure Indication - VT	25215
PLM	Signal Label Mismatch Failure - Payload Label Mismatch - VT	25216
UNEQ	Signal Label Mismatch Failure - Unequipped - VT	25217
UNIDENTIFIED	Peer State Mismatch	25218
EQPT	Facility Termination Equipment - Receiver Missing	25219
EQPT	Facility Termination Equipment - Transmitter Missing	25220
LOP	Loss of Pointer - VT	25221
UNIDENTIFIED	Embedded Operations Channel Failure - Link Down	25222
UNIDENTIFIED	Failed to Receive Synchronization Status Message	25223
UNIDENTIFIED	Synchronization Status Messages are Disabled on this Interface	25224
UNIDENTIFIED	Primary Reference Source - Stratum 1 Traceable	25225
UNIDENTIFIED	Synchronized - Traceability Unknown	25226
UNIDENTIFIED	Stratum 2 Traceable	25227
UNIDENTIFIED	Transit Node Clock Traceable	25228
UNIDENTIFIED	Stratum 3E Traceable	25229
UNIDENTIFIED	Stratum 3 Traceable	25230
UNIDENTIFIED	SONET Minimum Clock Traceable	25231
UNIDENTIFIED	Stratum 4 Traceable	25232
UNIDENTIFIED	Do Not Use for Synchronization	25233
UNIDENTIFIED	Reserved for Network Synchronization Use	25234
UNIDENTIFIED	Failure to Switch to Protection - Path	25235
UNIDENTIFIED	Manual Switch of Working Facility - Equipment to Protection - Path	25236
UNIDENTIFIED	Working Facility - Equipment Forced to Switch to Protection - Path	25237
UNIDENTIFIED	Lockout of Protection - Path	25238
UNIDENTIFIED	Automatic UPSR Switch caused by AIS	25239
UNIDENTIFIED	Automatic UPSR Switch caused by LOP	25240
UNIDENTIFIED	Automatic UPSR Switch caused by UNEQ	25241
UNIDENTIFIED	Automatic UPSR Switch caused by PDI	25242
UNIDENTIFIED	Automatic UPSR Switch caused by SFBER	25243
UNIDENTIFIED	Automatic UPSR Switch caused by SDBER	25244
UNIDENTIFIED	DS3 Idle Condition	25245
UNIDENTIFIED	DS1 Loopback due to FEAC Command	25246
UNIDENTIFIED	DS1 Loopback Command sent to Far End	25247
UNIDENTIFIED	DS3 Loopback due to FEAC Command	25248
UNIDENTIFIED	DS3 Loopback Command sent to Far End	25249
UNIDENTIFIED	DS2 Loopback due to Far End Command	25250
UNIDENTIFIED	DS2 Loopback Command sent to Far End	25251
ENV	Far End AIS	25252
UNIDENTIFIED	Far End Multiple DS1 LOS Detected on DS3	25253
ENV	Far End DS1 Equipment Failure - Non-Service Affecting	25254
ENV	Far End DS1 Equipment Failure - Service Affecting	25255
ENV	Far End Single DS1 LOS	25256
ENV	Far End DS3 Equipment Failure - Non-Service Affecting	25257
ENV	Far End DS3 Equipment Failure - Service Affecting	25258
ENV	Far End Common Equipment Failure - Non-Service Affecting	25259
UNIDENTIFIED	Far End IDLE	25260
ENV	Far End LOS	25261
ENV	Far End LOF	25262
UNIDENTIFIED	Performance Monitor Threshold Crossing Alert	25263
UNIDENTIFIED	Ethernet Bridge is New Root of Spanning Tree	25264
UNIDENTIFIED	Ethernet Bridge Topology Change	25265
UNIDENTIFIED	BLSR Tables Resynchronized	25266
ENV	System Reboot	25267
UNIDENTIFIED	Manual Switch Request on Facility - Equipment	25268
UNIDENTIFIED	Forced Switch Request on Facility or Equipment	25269
UNIDENTIFIED	Lockout Switch Request on Facility - Equipment	25270
UNIDENTIFIED	RMON Histories and Alarms Reset Reboot	25271
UNIDENTIFIED	RMON Alarm	25272
LOS	Video Interface Card Loss of Video IF Signal	25273
LOS	VIC Loss of Video Baseband Signal	25274
LOS	VIC Loss of Audio FM Signal	25275
LOS	VIC Loss of Audio Baseband Channel 1 Signal	25276
LOS	VIC Loss of Audio Baseband Channel 2 Signal	25277
LOS	VIC Loss of Audio Baseband Channel 3 Signal	25278
LOS	VIC Loss of Audio Baseband Channel 4 Signal	25279
TIM	STS Path Trace Identifier Mismatch	25280
ENV	NE Power Failure at Connector A	25281
ENV	NE Power Failure at Connector B	25282
UNIDENTIFIED	Free Memory on Card Very Low	25283
UNIDENTIFIED	Free Memory on Card Near Zero	25284
UNIDENTIFIED	Exercise Request on Ring	25285
UNIDENTIFIED	Exercise Request on Span	25286
UNIDENTIFIED	Squelching Path	25287
UNIDENTIFIED	Extra Traffic Preempted	25288
UNIDENTIFIED	Far End LockOut of Working - Ring	25289
UNIDENTIFIED	Far End LockOut of Working - Span	25290
UNIDENTIFIED	Far End Lockout of Protection - Ring	25291
UNIDENTIFIED	Far End Lockout of Protection - All Spans	25292
UNIDENTIFIED	Far End Working Facility Forced to Switch to Protection - Ring	25293
UNIDENTIFIED	Far End Working facility Forced to Switch to Protection - Span	25294
UNIDENTIFIED	Far End Manual Switch of Working Facility to Protection- Ring	25295
UNIDENTIFIED	Far End Manual Switch of Working Facility to Protection- Span	25296
UNIDENTIFIED	Far End Exercising Ring	25297
UNIDENTIFIED	Far End Exercising Span	25298
ENV	Far End BER Threshold Passed for Signal Failure - Ring	25299
ENV	Far End BER Threshold Passed for Signal Failure - Span	25300
ENV	Far End BER Threshold Passed for Signal Degrade - Ring	25301
ENV	Far End BER Threshold Passed for Signal Degrade - Span	25302
ENV	APS Channel - Far End Protection Line Signal Degrade	25303
UNIDENTIFIED	Ring Switch is Active on the East Side	25304
UNIDENTIFIED	Ring Switch is Active on the West Side	25305
UNIDENTIFIED	Span Switch is Active on the East Side	25306
UNIDENTIFIED	Span Switch is Active on the West Side	25307
UNIDENTIFIED	Unidirectional Full Pass-Through is Active	25308
UNIDENTIFIED	Bidirectional Full Pass-Through is Active	25309
UNIDENTIFIED	K Bytes Pass-Through isActive	25310
UNIDENTIFIED	Ring is Segmented	25311
UNIDENTIFIED	Ring Topology is Under Construction	25312
UNIDENTIFIED	Lockout of Protection - All Spans	25313
UNIDENTIFIED	Far End of Fiber is Provisioned with Different Ring ID	25314
UNIDENTIFIED	Both Ends of Fiber Provisioned as East or Both as West	25315
SECURITY_VIOLATION	Security - Invalid Login - See Audit Trail	25316
UNIDENTIFIED	Autonomous Messages Inhibited	25317
UNIDENTIFIED	Traffic Storm on LAN; LAN Temporarily Disabled	25318
UNIDENTIFIED	REPT^DBCHG Messages Inhibited	25319
SECURITY_VIOLATION	Security - User ID Has Expired	25320
EQPT	Partial Fan Failure	25321
UNIDENTIFIED	Force Switch Request on Ring	25322
UNIDENTIFIED	Force Switch Request on Span	25323
UNIDENTIFIED	Lockout Switch Request on Ring	25324
UNIDENTIFIED	Lockout Switch Request on Span	25325
UNIDENTIFIED	Manual Switch Request on Ring	25326
UNIDENTIFIED	Manual Switch Request on Span	25327
EQPT	Peer-to-Peer Slot Communication Failure	25328
EQPT	Peer-to-Peer Slot Communication Failure	25329
EQPT	TCC A to Shelf Slot Communication Failure	25330
EQPT	TCC B to Shelf Slot Communication Failure	25331
EQPT	Interconnection Equipment Failure - Working XC Payload Bus	25332
EQPT	Interconnection Equipment Failure - Protect XC Payload Bus	25333
EQPT	Inhibit Switch to Protect Request on Equipment	25334
EQPT	Inhibit Switch to Working Request on Equipment	25335
BER_SD	BER Threshold Exceeded for Signal Degrade - Line	25336
BER_SD	BER Threshold Exceeded for Signal Degrade - Path	25337
BER_SF	BER Threshold Exceeded for Signal Failure - Line	25338
BER_SF	BER Threshold Exceeded for Signal Failure - Path	25339
UNIDENTIFIED	Exercising Ring Successfully	25340
UNIDENTIFIED	Exercising Span Successfully	25341
UNIDENTIFIED	Span is in Wait to Restore State	25342
EQPT	Peer Card Not Responding	25343
UNIDENTIFIED	Exercise Request on Ring Failed	25344
UNIDENTIFIED	Exercise Request on Span Failed	25345
UNIDENTIFIED	Far End Lockout of Protection - Span	25346
EQPT	Manufacturing Data Memory (EEPROM) Failure	25347
EQPT	Replaceable Equipment/Unit is Missing	25348
ENV	Software Download Failure	25349
TIM	TIM Section - Trace Identifier Mismatch Failure	25350
AIS	AIS - Multiplex Section - Alarm Indication Signal	25351
RAI	RFI - Multiplex Section - Remote Failure/Alarm Indication	25352
TIM	TIM High Order - Trace Identifier Mismatch Failure	25353
AU_AIS	AIS - Administration Unit - Alarm Indication Signal	25354
LOP	LOP - Administration Unit - Loss of Pointer	25355
UNEQ	SLMF - Unequipped High Order - Path Unequipped	25356
PLM	SLMF - PLM High Order - Path Label Mismatch	25357
RAI	RFI - High Order - Remote Failure/Alarm Indication	25358
LOP	LOP - Tributary Unit - Loss of Pointer	25359
TU-AIS	AIS - Tributary Unit - Alarm Indication Signal	25360
UNEQ	SLMF - Unequipped Low Order - Path Unequipped	25361
PLM	SLMF - PLM Low Order - Path Label Mismatch	25362
TIM	TIM Low Order - Trace Identifier Mismatch Failure	25363
RAI	RFI - Low Order - Remote Failure/Alarm Indication	25364
UNIDENTIFIED	G811 - Primary Reference Clock Traceable	25365
UNIDENTIFIED	G812 - Transit Node Clock Traceable	25366
UNIDENTIFIED	G812 - Local Node Clock Traceable	25367
UNIDENTIFIED	G813 - Synchronous Equipment Timing Source Traceable	25368
UNIDENTIFIED	E1 Loopback due to FEAC Command	25369
UNIDENTIFIED	E1 Loopback Command Sent to Far End	25370
UNIDENTIFIED	E3 Loopback due to FEAC Command	25371
ENV	Far End Multiple E1 LOS Detected on E3	25372
ENV	Far End E1 Equipment Failure Non-Service Affecting	25373
ENV	Far End E1 Equipment Failure Service Affecting	25374
ENV	Far End Single E1 LOS	25375
ENV	Far End E3 Equipment Failure Service Affecting	25376
UNIDENTIFIED	E3 Loopback Command Sent to Far End	25377
ENV	Far End E3 Equipment Failure Non-Service Affecting	25378
ENV	Low Voltage - Battery A	25379
ENV	High Voltage - Battery A	25380
ENV	Low Voltage - Battery B	25381
ENV	High Voltage - Battery B	25382
UNIDENTIFIED	Procedural Error - MS-SP Ring out of Sync	25383
UNIDENTIFIED	MS-SP Ring Tables Resynchronized	25384
UNIDENTIFIED	Automatic SNCP Switch caused by AIS	25385
UNIDENTIFIED	Automatic SNCP Switch caused by LOP	25386
UNIDENTIFIED	Automatic SNCP Switch caused by UNEQ	25387
UNIDENTIFIED	Automatic SNCP Switch caused by PDI	25388
UNIDENTIFIED	Automatic SNCP Switch caused by SFBER	25389
UNIDENTIFIED	Automatic SNCP Switch caused by SDBER	25390
UNIDENTIFIED	STM Concatenation Error	25391
UNIDENTIFIED	E3 Idle Condition	25392
UNIDENTIFIED	IOS Config Copy Failed	25393
UNIDENTIFIED	IOS Config Copy In Progress	25394
UNIDENTIFIED	Alarms Suppressed by User Command	25399
UNIDENTIFIED	Alarms Suppressed for Maintenance	25400
UNIDENTIFIED	N/A	25401
UNIDENTIFIED	Synchronization Reference Frequency Out of Bounds	25402
UNIDENTIFIED	Ether Tx Excess Flow Ctrl	25403
UNIDENTIFIED	Ether Tx Oversubscribed	25404
UNIDENTIFIED	Transport Layer Failure	25405
UNIDENTIFIED	Ether Rx Excess Flow Ctrl	25406
UNIDENTIFIED	Ether Rx Oversubscribed	25407
UNIDENTIFIED	Ether Tx Underrun	25408
UNIDENTIFIED	SNTP Host Failure	25409
UNIDENTIFIED	DS3 Frame Format Mismatch	25410
UNIDENTIFIED	Alarms/Events Suppressed for this Object	25411
BER_SD	BER Threshold Exceeded for Signal Degrade - High Order	25412
BER_SF	BER Threshold Exceeded for Signal Failure - High Order	25413
BER_SD	BER Threshold Exceeded for Signal Degrade - Low Order	25414
BER_SF	BER Threshold Exceeded for Signal Failure - Low Order	25415
UNIDENTIFIED	Failure to Switch to Protection - High Order Path	25416
UNIDENTIFIED	Failure to Switch to Protection - Low Order Path	25417
UNIDENTIFIED	Wait to Restore	25418
ENV	Extreme High Voltage - Battery A	25419
ENV	Extreme Low Voltage - Battery A	25420
ENV	Extreme High Voltage - Battery B	25421
ENV	Extreme Low Voltage - Battery B	25422
UNIDENTIFIED	Switching Matrix Module Failure	25423
UNIDENTIFIED	Signaling Unable to Set Up Circuit	25424
UNIDENTIFIED	RSVP Hello FSM to Neighbor Down	25425
UNIDENTIFIED	LMP Hello FSM to Control Channel Down	25426
UNIDENTIFIED	LMP Neighbor Discovery Has Failed	25427
UNIDENTIFIED	Unauthorized Incoming Signaling Request	25428
UNIDENTIFIED	Signaled Circuit Going Down	25429
UNIDENTIFIED	Autonomous PM Report Message Inhibited	25430
EQPT	I/O Slot to XCON Communication Failure	25431
UNIDENTIFIED	Forced Switch to Primary Reference	25432
UNIDENTIFIED	Forced Switch to Secondary Reference	25433
UNIDENTIFIED	Forced Switch to Third Reference	25434
UNIDENTIFIED	Forced Switch to Internal Clock	25435
LOM