Table Of Contents

Database Schema Tables

1.1  CTM Sequence Numbers

1.2  CTM Tables

1.2.1  Ack_Table

1.2.2  Active_Alarm_Table

1.2.3  Additional_Device_Info

1.2.4  Admin_Job_Table

1.2.5  Alarm_Ack_Config_Table

1.2.6  Alarm_Count_Table

1.2.7  Alarm_Event_Cause_Table

1.2.8  Alarm_Event_Table

1.2.9  Alarm_Event_Type_ENUM_Table

1.2.10  APS_Group_Table

1.2.11  Audit_Log_Mapping_Table

1.2.12  Audit_Log_Table

1.2.13  BLSR_Node

1.2.14  BLSR_SPAN

1.2.15  BLSR_Table

1.2.16  Bridge_Group_Table

1.2.17  C_MetaData

1.2.18  C_MetaData_Attr_Presentation

1.2.19  C_MetaData_Col

1.2.20  C_MetaData_Filter

1.2.21  C_MetaData_Grp_Presentation

1.2.22  C_MetaData_NETypes

1.2.23  C_Property_Sheet_Info_Table

1.2.24  C_Tab_Metadata_Info_Table

1.2.25  C_Tab_Metadata_Table

1.2.26  Cerent_NE_Group_Table

1.2.27  Circuit_Dest_Tbl

1.2.28  Circuit_Size_Table

1.2.29  Circuit_Span_Tbl

1.2.30  Circuit_Tbl

1.2.31  Circuit_VCG_Tbl

1.2.32  Circuit_VLAN_Tbl

1.2.33  CLISession_Command_History_Tbl

1.2.34  CORBA_Functions_Table

1.2.35  CORBA_Interface_Table

1.2.36  CORBA_Permission_Table

1.2.37  CTC_Model_Const_Table

1.2.38  CTC_UserProfile_Table

1.2.39  CTM_Config_Table

1.2.40  CTM_Unique_ObjectType_Table

1.2.41  DB_Pruning_Table

1.2.42  Debug_Module_Mapping_Table

1.2.43  Debug_Module_Table

1.2.44  Deleted_User_Table

1.2.45  Diskspace_Usage_Table

1.2.46  Domain_Table

1.2.47  Ems_Alarm_Table

1.2.48  Enum_Table

1.2.49  EQPT_Info_Table

1.2.50  Eqpt_Relationship_Table

1.2.51  Error_Log_Table

1.2.52  Forwarding_Table

1.2.53  GNE_Table

1.2.54  Group_Info_Table

1.2.55  HA_Table

1.2.56  HFR_ACL_Policy_Config

1.2.57  HFR_BGP_PEER_PM_Table

1.2.58  HFR_Common_Interface_Config

1.2.59  HFR_ETHER_Interface_Config

1.2.60  HFR_Interface_DRC_PM_Table

1.2.61  HFR_Interface_GC_PM_Table

1.2.62  HFR_Interface_Helper_Address

1.2.63  HFR_Interface_MTU_Layer2

1.2.64  HFR_Interface_Secondary_Addr

1.2.65  HFR_MPLS_Interface_PM_Table

1.2.66  HFR_MPLS_LDP_PM_Table

1.2.67  HFR_MPLS_TE_Link_PM_Table

1.2.68  HFR_MPLS_TE_Tunnel_PM_Table

1.2.69  HFR_Node_CPU_PM_Table

1.2.70  HFR_Node_Memory_PM_Table

1.2.71  HFR_Node_Process_PM_Table

1.2.72  HFR_POS_Interface_Config

1.2.73  HFR_SONET_Interface_Config

1.2.74  HFR_SONET_Interface_Path

1.2.75  HFR_Version_Info

1.2.76  IF_Cross_Connect

1.2.77  IF_DWDM_Channel_Group

1.2.78  IF_Optical_Phy_Config_Table

1.2.79  IFIndex_Rule_Table

1.2.80  Interface_APS_Info

1.2.81  Interface_DWDM_Frequency

1.2.82  Interface_Stack_Table

1.2.83  Interface_Table

1.2.84  IOS_Parser_Static_Tree_Table

1.2.85  L2_FrontPort_Table

1.2.86  L2_Interface_QoSClass_Table

1.2.87  L2_Interface_Table

1.2.88  L2QoSTemplate_QoSClass_Table

1.2.89  L2QoSTemplate_Table

1.2.90  L2Topology_Circuits_Table

1.2.91  L2Topology_Table

1.2.92  L2_Vlan_Table

1.2.93  Link_Table

1.2.94  Managed_Et_Table

1.2.95  Map_Coordinate_Table

1.2.96  Map_Cust_Table

1.2.97  Map_Image_Table

1.2.98  Map_Link_Table

1.2.99  MIB2_Interface_Table

1.2.100  Model_Type_Table

1.2.101  Module155xx_Community_String

1.2.102  Module155xx_VTOID_Table

1.2.103  Module_Type_Mll_Info

1.2.104  Module_Type_Table

1.2.105  NE_Audit_Trail_Table

1.2.106  NE_Info_Table

1.2.107  NE_Inventory_Table

1.2.108  NE_Model_State_Table

1.2.109  NE_Model_Type_Table

1.2.110  NE_Port_Status_Table

1.2.111  NE_Swimage_Table

1.2.112  Network_Partition_Table

1.2.113  ObjectAttributeTable

1.2.114  Object_Relationship_Table

1.2.115  ObjectTypeTable

1.2.116  ONS15216_Active_User_Table

1.2.117  ONS15216_NE_Inventory_Table

1.2.118  ONS15216_Privilege_Table

1.2.119  ONS15216_User_Table

1.2.120  ONS1530x_HO_PM_Table

1.2.121  ONS1530x_IP_PM_Table

1.2.122  ONS1530x_LO_PM_Table

1.2.123  ONS1530x_MS_PM_Table

1.2.124  ONS1530x_NE_Inventory_Table

1.2.125  ONS1530x_RS_PM_Table

1.2.126  ONS15454_327_NE_Table

1.2.127  ONS15454_8B10B_PM_Table

1.2.128  ONS15454_Active_User_Table

1.2.129  ONS15454_CBQoS_Info_Table

1.2.130  ONS15454_CLASSMAP_PM_Table

1.2.131  ONS15454_CMS_Storage_Table

1.2.132  ONS15454_COS_PM_Table

1.2.133  ONS15454_DS1_PM_Table

1.2.134  ONS15454_DS3_PM_Table

1.2.135  ONS15454_ENET_PM_Table

1.2.136  ONS15454_FC_PM_Table

1.2.137  ONS15454_IFX_PM_Table

1.2.138  ONS15454_Match_STMT_PM_Table

1.2.139  ONS15454_NE_Inventory_Table

1.2.140  ONS15454_OTN_Fec_PM_Table

1.2.141  ONS15454_OTN_Path_PM_Table

1.2.142  ONS15454_OTN_Sec_PM_Table

1.2.143  ONS15454_PHY_LAYER_PM_Table

1.2.144  ONS15454_Police_PM_Table

1.2.145  ONS15454_POS_PM_Table

1.2.146  ONS15454_Privilege_Table

1.2.147  ONS15454_SONET_Line_PM_Table

1.2.148  ONS15454_SONET_Path_PM_Table

1.2.149  ONS15454_SONET_Sec_PM_Table

1.2.150  ONS15454_SONET_VT_PM_Table

1.2.151  ONS15454_User_Table

1.2.152  ONS15454SDH_E1_PM_Table

1.2.153  ONS15454SDH_E3_PM_Table

1.2.154  ONS15454SDH_E4_PM_Table

1.2.155  ONS15454SDH_HO_PM_Table

1.2.156  ONS15454SDH_LO_PM_Table

1.2.157  ONS15454SDH_MS_PM_Table

1.2.158  ONS15454SDH_RS_PM_Table

1.2.159  ONS15501_NE_Explorer_Table

1.2.160  ONS15501_Opt_Power_PM_Table

1.2.161  ONS155xx_CDL_Flow_Config

1.2.162  ONS155xx_CDL_IF_Config

1.2.163  ONS155xx_CDL_PM_Table

1.2.164  ONS155xx_Circuit_CC_Tbl

1.2.165  ONS155xx_Circuit_Path_Tbl

1.2.166  ONS155xx_Circuit_Stack_Tbl

1.2.167  ONS155xx_Condtype_Map

1.2.168  ONS155xx_DCRP_Definition_Table

1.2.169  ONS155xx_DCRP_Table

1.2.170  ONS155xx_Discovery_Info_Table

1.2.171  ONS155xx_Ether_Hist_PM_Table

1.2.172  ONS155xx_FCM_PE_PM_Table

1.2.173  ONS155xx_Flash_Device_Table

1.2.174  ONS155xx_Flash_Partition_Table

1.2.175  ONS155xx_GRA_CC_TO_CKT_CC_Tbl

1.2.176  ONS155xx_Granular_CC_Tbl

1.2.177  ONS155xx_IF_Circuit_Params_Tbl

1.2.178  ONS155xx_IF_Optical_Power

1.2.179  ONS155xx_IF_Phy_Info_Table

1.2.180  ONS155xx_NE_Info_Table

1.2.181  ONS155xx_NE_Type_Table

1.2.182  ONS155xx_Opt_Power_PM_Table

1.2.183  ONS155xx_Path_Hop_Tbl

1.2.184  ONS155xx_Path_Tbl

1.2.185  ONS155xx_Phy_PM_Table

1.2.186  ONS155xx_SONET_Sec_PM_Table

1.2.187  ONS15600_ENET_PM_Table

1.2.188  ONS15600_POS_PM_Table

1.2.189  ONS15600_Sonet_Line_PM_Table

1.2.190  ONS15600_Sonet_Path_PM_Table

1.2.191  ONS15600_Sonet_Sec_PM_Table

1.2.192  ONS15600SDH_HO_PM_Table

1.2.193  ONS15600SDH_MS_PM_Table

1.2.194  ONS15600SDH_RS_PM_Table

1.2.195  ONS158xx_Amplifier_PM_Table

1.2.196  ONS158xx_BCS_PM_Table

1.2.197  ONS158xx_CMP_PM_Table

1.2.198  ONS158xx_IOC_W_PM_Table

1.2.199  ONS158xx_LAC_Active_User_Table

1.2.200  ONS158xx_LAC_Log_Status_Table

1.2.201  ONS158xx_LAC_Log_Table

1.2.202  ONS158xx_LAC_Profile_Table

1.2.203  ONS158xx_LAC_User_Table

1.2.204  ONS158xx_LSM_PM_Table

1.2.205  ONS158xx_NE_IP_Table

1.2.206  ONS158xx_OAD_PM_Table

1.2.207  ONS158xx_OADM_PM_Table

1.2.208  ONS158xx_OSU_PM_Table

1.2.209  ONS158xx_OTS_PTP_Table

1.2.210  ONS158xx_PM_ACT_MOD_Table

1.2.211  ONS158xx_PTPType_Table

1.2.212  ONS158xx_SCF_PM_Table

1.2.213  ONS158xx_TimeStamp_PM_Table

1.2.214  ONS158xx_Transponder_PM_Table

1.2.215  ONS158xx_WD_PM_Table

1.2.216  ONS158xx_WD_RX_PM_Table

1.2.217  Operation_Permissions_Table

1.2.218  Operations_Table

1.2.219  OSS_Active_User_Table

1.2.220  OSS_AID_ENUM_Table

1.2.221  OSS_Alarm_Filter_Table

1.2.222  OSS_Alarm_Fltr_AID_Deny_Tbl

1.2.223  OSS_Alarm_Fltr_TID_Deny_Tbl

1.2.224  OSS_CORBA_User_Table

1.2.225  OSS_User_Table

1.2.226  Password_History_Table

1.2.227  PatchCord_Table

1.2.228  PM_ATTR_Value_Mapping_Table

1.2.229  PM_ATTRID_Mapping_Table

1.2.230  PM_Cerent_Info_Table

1.2.231  PM_Historical_Appointments

1.2.232  PM_Metadata_Table

1.2.233  Proxy_Server_Table

1.2.234  Purged_NE_Table

1.2.235  Roll_Table

1.2.236  Schedule_Info_Table

1.2.237  Server_Monitor_Table

1.2.238  Server_Parameter_Table

1.2.239  Subnetwork_Table

1.2.240  SVC_Config_Table

1.2.241  SVC_Info_Table

1.2.242  SVC_NEModel_Table

1.2.243  SVC_Package_Table

1.2.244  Sway_User_Port_Table

1.2.245  Table_Info

1.2.246  TCA_Event_Table

1.2.247  TCA_Event_Type_Table

1.2.248  Threshold_Table

1.2.249  Transaction_Log_Table

1.2.250  Unmanaged_NE_Inventory_Table

1.2.251  User_Map_Table

1.2.252  User_NE_Table

1.2.253  User_Preference_Table

1.2.254  User_Table

1.2.255  User_Type_Table

1.2.256  Version_Table

1.2.257  Wavemux_NE

1.2.258  XML_Parser_Static_Tree_Table

Database Schema Tables

---

This chapter describes tables and table sequence numbers.

1.1  CTM Sequence Numbers

Sequence numbers are Oracle integers of up to 38 digits that are defined in the database. A sequence generates a serial list of unique numbers for numeric columns in a database's tables. Sequences simplify application programming by automatically generating unique numerical values for the rows in one or in multiple tables. The sequence numbers used in the CTM schema are listed in Table 1-1.

Table 1-1 Sequence Numbers used in the CTM Schema 

Sequence Number	Description
ACKINDEX_SEQ	Used when an alarm acknowledgement is added to Ack_Table.
ACTIVEALARMINDEX_SEQ	Used when an alarm is added to the Active_Alarm_Table.
ALARMFILTERID_SEQ	Used when adding a filter profile name to the OSS_Alarm_Filter_Table.
BLSRID_SEQ	Used to generate ID number when adding a new BLS ring to the BLSR_table.
COORDINDEX_SEQ	Used when adding a map coordinate to the Map_Coordinate_Table.
CKTSPANID_SEQ	Used when adding a circuit span to the Circuit_Span_Tbl.
CUSTOMIZATIONID_SEQ	Used when adding a map customization to the Map_Cust_Table.
DCRPDBID_SEQ	Used when discrepancies are added to the ONS155xx_Dcrp_Table.
DEVICEID_SEQ	Used when adding a device to Additional_Device_Info.
DT_TREENODEID_SEQ	Used when group or NE nodes are added to the Domain_Table.
EVENTINDEX_SEQ	Used while inserting alarms and events in the Alarm_Event_Table.
FLASHDEVDBID_SEQ	Used for the Flash devices in the ONS155xx_Flash_Device_Table.
FLASHPARTDBID_SEQ	Used for Flash devices in the ONS155xx_Flash_Partition_Table.
GNEID_SEQ	Used when a GNE is added to the GNE_Table.
GROUPID_SEQ	Used when groups are added to the Group_Info_Table.
IF_XC_SEQ	Used when adding cross-connects to the IF_Cross_Connect.
IFDACCESSID_SEQ	Used for parameters in the MIB2_Interface_Table.
IFSTACK_SEQ	Used for underlying/overlaying layer relationships in the Interface_Stack_Table.
JARID_SEQ	Used for the ONS15454_CMS_Storage_Table.
JOBID_SEQ	Used when a job is added to the Admin_Job_Table.
LINKID_SEQ	Used when adding a link to the Link_Table.
MAPIMAGEID_SEQ	Used when adding a map image to the Map_Image_Table.
MAPLINKID_SEQ	Used when adding a map link to the Map_Link_Table.
NEDBACCESSID_SEQ	Used when NEs are added to the NE_Info_Table.
NPID_SEQ	Used when adding a new network partition to Network_Partition_Table.
ONS155XX_CIRCUIT_CC_DBID_SEQ	Used for circuit-specific cross-connects in the ONS155xx_Circuit_CC_Tbl.
ONS155XX_GRANULAR_CC_DBID_SEQ	Used for NE-specific cross-connects in the ONS155xx_Granular_CC_Tbl.
ONS155XX_PATH_DBID_SEQ	Used for the ONS155xx_Path_Tbl.
QOSTEMPLATEID_SEQ	Used to generate a QoS template ID when a new QoS template is added.
SERVER_PARAMETER_SEQ	Used as parameter index in Server_Parameter_Table.
SID_SEQ	Used to generate a service ID when a service is added.
SUBNETID_SEQ	Used when adding a subnetwork to the Subnetwork_Table.
TASKID_SEQ	Used when a task is added to the Admin_Job_Table.
TRANSID_SEQ	Used when adding a transaction to the NE_SWIMAGE_Table.
USERID_SEQ	Used when CTM users are added to the User_Table.
USERTYPEID_SEQ	Used when a new usertype is added to the User_Type_Table.

1.2  CTM Tables

This section describes the database tables created by CTM, listed in alphabetical order.

1.2.1  Ack_Table

The Ack_Table (Table 1-2) provides information about the user who acknowledged an alarm and the time that the alarm was acknowledged.

Primary key: ALARM_ACK_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-2 Ack_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
AckIndex	NUMBER(10)	—	Index of the alarm acknowledgement. A unique sequence number whose value is saved in the database and incremented in memory. There is a single value of 0 for all unacknowledged alarms. Acknowledged alarms have an entry in this table and the AckIndex is stored in the AckIndex of the Active_Alarm_Table. Values are: 0: Unacknowledged Any other number: Acknowledged
AckUserName	VARCHAR2(64)	—	Name of the user.
AckTimeStamp	DATE	—	Date and time of the acknowledgement.
IsAutoAck	NUMBER(1)	—	Indicates whether acknowledgment is manual or automatic: 0: Manual 1: Automatic

1.2.2  Active_Alarm_Table

The Active_Alarm_Table (Table 1-3) contains information about all standing conditions on NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ACTIVE_ALARM_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-3 Active_Alarm_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
AlarmSeqNum	NUMBER(20)	NOT NULL	Unique sequence number of the alarm as referenced by the NE.
ModuleOrIfIndex	NUMBER(20)	NOT NULL	Unique long data type that identifies an interface in the NE; same as ifStaticIndex in the Interface_Table.
ActiveAlarmTimeStamp	DATE	NOT NULL	Date and time when the active alarm was generated.
ActiveAlarmType	NUMBER(5)	NOT NULL	Alarm event type. Values are rows of the Alarm_Event_Type_Enum_Table.
ActiveAlarmSeverity	NUMBER(1)	NOT NULL	Severity level of the alarm. Values are: 3: Not alarmed 4: Warning 5: Minor 6: Major 7: Critical
ActiveAlarmServEff	NUMBER(1)	NOT NULL	Values: 0: Alarm does not affect service 1: Alarm affects service 2: Unknown
ActiveAlarmAdditionalInfo	VARCHAR2(512)	—	Additional information about the current alarm.
AckIndex	NUMBER(10)	NOT NULL	Index of the alarm acknowledgement.
ActiveAlarmFlag	NUMBER(1)	DEFAULT 0	Active alarm flag, which the server uses to synchronize the database to the NE information.
ActiveAlarmComment	VARCHAR2(2014)	—	Alarm comments.
ClearAlarmTimeStamp	DATE	DEFAULT NULL	Date and time when the alarm was cleared.
NEAlarmTimeStamp	DATE	NOT NULL	Date and time when the alarm was generated as viewed by the NE.
ActiveAlarmIndex	NUMBER(8)	NOT NULL	Unique alarm sequence number as created by the database.
ModuleType	NUMBER(8)	DEFAULT 0	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
Alarmstatus	NUMBER(1)	NOT NULL	Indicates whether alarm is active or clear: 0: Active 1: Clear
NEAlarmClearTimeStamp	DATE	—	When the NE alarm was cleared.
ExternalCondition	VARCHAR2(1024)	—	External environment condition for the NEs.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjectInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.3  Additional_Device_Info

The Additional_Device_Info (Table 1-4) contains information on additional devices.

Primary key: ADDITIONAL_DEVICE_INFO

Tablespace: BASE_DATA_TABLESPACE

Table 1-4 Additional_Device_Info 

Column Name	Oracle Data Type	Integrity Constraints	Description
DeviceID	NUMBER(10)	NOT NULL	Unique ID generated by the database.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access the Additional_Device_Info table; same as NEDBAccessID in the NE_Info_Table.
PhyLoc	NUMBER(20)	NOT NULL	Physical location of the card.
ModuleType	NUMBER(8)	NOT NULL	Module type of the additional device.
IpAddress	NUMBER(10)	—	IP address of the additional device.
State	NUMBER(1)	NOT NULL	State of the additional device. Valid values are: 1: Device In Service 2: Device Out of Service 3: Device Pre-Provisioned 4: Device Under Maintenance
isConnected	NUMBER(1)	NOT NULL	Values are: 0: Unreachable 1: Device is reachable from CTM server
DiscoveryState	NUMBER(1)	—	Device discovery state. Valid values are: 1: Device undiscovered 2: Device Initializing 3: Device synch configuration 4: Device discovered

1.2.4  Admin_Job_Table

The Admin_Job_Table (Table 1-5) contains information about all administrative tasks and their status.

Primary key: ADMIN_JOB_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-5 Admin_Job_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
JobID	NUMBER(12)	NOT NULL	Unique job identifier.
TaskID	NUMBER(12)	NOT NULL	Unique identifier for the task within a job.
JobType	NUMBER(2)	NOT NULL	Type of job. Valid types are: 0: NE User Add 1: NE User Modify 2: NE User Delete 3: NE User Logout 4: NE User Conn Delete 5: NE User Enable Log 6: NE User Disable Log 7: NE User Delete Log 8: Image Activate 9: Image Revert 10: Image Download 11: Memory Auto Backup 12: Memory Backup 13: Memory Restore 14: Image Download and Activate 15: SNTP Setup Job 22: BLSR Exercise Ring Backup
JobOwner	VARCHAR2(64)	—	Owner of job.
NEDBAccessID	NUMBER(10)	—	NEDBAccessID of the NE for which the job was scheduled; same as NEDBAccessID in the NE_Info_Table.
JobStatus	NUMBER(1)	—	Status of the job. Values are: 0: Uninitialized 1: Queued 2: Running 3: Cancelled 4: Failed 5: Succeeded 6: Unknown 7: Waiting
CreationTime	DATE	—	Time stamp when the job was created.
ScheduledTime	DATE	—	Time stamp when the job was scheduled to run.
StartTime	DATE	—	Time stamp when the job was actually started.
EndTime	DATE	—	Time stamp when the job was completed.
AdditionalInfo	VARCHAR2(512)	—	Any additional information.
UserComments	VARCHAR2(2048)	—	Any comments entered by the user.
operation_info	VARCHAR2(4000)	—	List of parameters specific to a job.
display_info	VARCHAR2(4000)	—	String that displays job-specific information according to specific criteria.

1.2.5  Alarm_Ack_Config_Table

The Alarm_Ack_Config_Table (Table 1-6) stores information about whether or not automatic alarm acknowledgement is enabled.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-6 Alarm_Ack_Config_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ConfigAlarmAck	NUMBER(1)	NOT NULL	A global, C-style, Boolean variable that represents whether alarm acknowledgement is on for all alarms. Values are: 0: Off 1: On

1.2.6  Alarm_Count_Table

The Alarm_Count_Table (Table 1-7) stores the alarm count for each level of severity for every NE.

Primary key: ALARM_COUNT_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-7 Alarm_Count_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
AlarmCountType	NUMBER(1)	NOT NULL	Alarm count type: 4: Warning 5: Minor 6: Major 7: Critical -1: Total cleared -2: Total acknowledged
TOTALALARMCOUNT	NUMBER(20)	—	Total alarm count.

1.2.7  Alarm_Event_Cause_Table

The Alarm_Event_Cause_Table (Table 1-8) statically maps alarm and event cause indexes to strings.

Primary key: ALARM_EVENT_CAUSE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-8 Alarm_Event_Cause_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
EnumIndex	NUMBER(4)	—	Index of alarm or event cause.
EnumString	VARCHAR2(64)	—	Alarm or event cause string for the EnumIndex.

1.2.8  Alarm_Event_Table

The Alarm_Event_Table (Table 1-9) contains information about all events reported by NEs.

Primary key: None

Tablespace: EVENT_DATA_TABLESPACE

Table 1-9 Alarm_Event_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
EventIndex	NUMBER(10)	NOT NULL	Index of alarm or event. Unique sequence number generated by the database.
ModuleOrIfIndex	NUMBER(20)	NOT NULL	Unique integer that identifies an interface in the NE; same as ifStaticIndex in the Interface_Table.
AlarmEventType	NUMBER(5)	NOT NULL	Type of alarm or event. The Alarm_Event_Type_ENUM_Table lists valid types. Range is 1 to n.
AlarmEventTimeStamp	DATE	NOT NULL	Date and time when the alarm or event was generated.
AlarmEventCause	NUMBER(4)	NOT NULL	Cause of alarm or event. The Alarm_Event_Cause_Table lists valid types. Range is 1 to n.
AlarmEventSeverity	NUMBER(1)	NOT NULL	Severity level of the alarm.
ServiceEffecting	NUMBER(1)	NOT NULL	Values: 0: Alarm does not affect service 1: Alarm affects service 2: Unknown
OtherInfo	VARCHAR2(512)	DEFAULT Not applicable	Display string of alarm or event.
ModuleType	NUMBER(8)	DEFAULT 0	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEEventTimeStamp	DATE	NOT NULL	Time stamp of the NE event.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Model type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.9  Alarm_Event_Type_ENUM_Table

The Alarm_Event_Type_ENUM_Table (Table 1-10) statically maps alarm and event type indexes to strings.

Primary key: ALARM_EVENT_TYPE_ENUM_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-10 Alarm_Event_Type_ENUM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
EnumIndex	NUMBER(5)	—	Index of alarm or event type.
EnumString	VARCHAR2(128)	—	Alarm or event type string for the EnumIndex.
TL1String	VARCHAR2(64)	—	Transaction language 1 (TL1) string for the alarm.
TMFString	VARCHAR2(64)	DEFAULT UNIDENTIFIED	TMF mapping string for the alarm
EventType	NUMBER(1)	DEFAULT 1	Type of event. Values are: 1: NE_ALARM 2: NE_EVENT 3: EMS_EVENT 4: EMS_ALARM

1.2.10  APS_Group_Table

The APS_Group_Table (Table 1-11) contains information about the automatic protection switching (APS) groups configured in each device.

Primary key: APS_GROUP_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-11 APS_Group_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	Specific NE instance; same as NEDBAccessID in the NE_Info_Table.
GroupName	VARCHAR2(64)	NOT NULL	Group name for APS.
ConfigMode	NUMBER(2)	DEFAULT 1	APS group architecture. Values are: 1: 1+1 2: 1:N 3: 1+1 compatible 4: 1+1 optimized
ConfigRevert	NUMBER(2)	DEFAULT 1	Revertive mode. Values are: 1: Nonrevertive 2: Revertive
ConfigDirection	NUMBER(2)	DEFAULT 1	Direction. Values are: 1: Unidirectional 2: Bidirectional
ConfigCreationTime	DATE	—	Time when this group was created.
ConfigSpan	NUMBER(2)	DEFAULT 1	Type of span. Values are: 1: Hop-by-hop 2: End-to-end
ProtectionType	NUMBER(2)	DEFAULT 1	Type of protection. Values are: 1: None 2: Splitter 3: Y-cable 4: Trunk
YCableConfig	NUMBER(2)	DEFAULT 1	Y-cable configuration if y-cable protection is used. Values are: 1: Not y-cable 2: Y-cable 3: Y-cable cross-connect common
SwitchedChannelStatus	NUMBER(2)	DEFAULT 0	Protection channel number.

1.2.11  Audit_Log_Mapping_Table

The Audit_Log_Mapping_Table (Table 1-12) contains information about the audit log mapping table.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-12 Audit_Log_Mapping_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserType	NUMBER(10)	—	Defines whether user type is Service or User.
ActualName	VARCHAR(256)	—	Name agreed upon by client and server.
CurrentName	VARCHAR(256)	—	Name currently used by the server.

1.2.12  Audit_Log_Table

The Audit_Log_Table is obsolete.

1.2.13  BLSR_Node

The BLSR_Node (Table 1-13) contains information about the BLSR node.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-13 BLSR_Node 

Column Name	Oracle Data Type	Integrity Constraints	Description
BLSRID	NUMBER(8)	NOT NULL	BLSR ID.
RINGID	VARCHAR(8)	NOT NULL	Ring ID.
NODEID	NUMBER(8)	NOT NULL	Node ID.
RINGNODEID	NUMBER(8)	NOT NULL	Ring node ID.

1.2.14  BLSR_SPAN

The BLSR_SPAN (Table 1-14) contains information about the BLSR span.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-14 BLSR_Span 

Column Name	Oracle Data Type	Integrity Constraints	Description
BLSRID	NUMBER(8)	NOT NULL	BLSR ID.
RINGID	VARCHAR(8)	NOT NULL	Ring ID.
LINKID	NUMBER(8)	NOT NULL	Link ID.
WORKINGSPAN	NUMBER(1)	NOT NULL	Working span.
WESTNODEID	NUMBER(10)	NOT NULL	Node ID of the BLSR (west line).
EASTNODEID	NUMBER(10)	NOT NULL	Node ID of the BLSR (east line).

1.2.15  BLSR_Table

The BLSR_Table (Table 1-15) contains information about BLSRs.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-15 BLSR_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
BLSRID	NUMBER(8)	NOT NULL	BLSR ID.
RINGID	VARCHAR(8)	NOT NULL	Ring ID.
RINGTYPE	NUMBER(2)	NOT NULL	Ring type.
LINERATE	NUMBER(2)	NOT NULL	Line rate.
STATUS	VARCHAR2(12)	NOT NULL	Ring status.
RINGREVERSION	NUMBER(8, 2)	NOT NULL	Ring reversion time.
SPANREVERSION	NUMBER(8, 2)	NOT NULL	Span reversion time.
NODES	VARCHAR2(512)	NOT NULL	Nodes associated with the ring.

1.2.16  Bridge_Group_Table

The Bridge_Group_Table (Table 1-16) contains information about the bridge group table.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-16 Bridge_Group_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TopoNodeID	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit.
TopoUniqueId	NUMBER(10)	NOT NULL	Unique number to identify the VLAN.
NEID	NUMBER(10)	NOT NULL	NE ID.
Slot_Number	NUMBER(3)	NOT NULL	Slot number.
Bridge_Group_Number	NUMBER(3)	NOT NULL	Bridge group number.

1.2.17  C_MetaData

The C_MetaData table (Table 1-17) defines overall graphical user interface (GUI) information for a given database table or view.

---

Note C_MetaData is the parent table; C_MetaData_Col, C_MetaData_Filter, and C_MetaData_NETypes are the children.

---

Primary key: C_METADATA_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-17 C_MetaData 

Column Name	Oracle Data Type	Integrity Constraints	Description
TableID	NUMBER(4)	NOT NULL	Unique ID for each GUI table metadata.
TableName	VARCHAR2(30)	NOT NULL	Name of the table.
TableJDAQName	VARCHAR2(128)	—	JDAQ name.
TableType	NUMBER(1)	—	Title of table frame. Values are FM (fault management), PM, CM (configuration management), and other.
Title	VARCHAR2(132)	—	Title of the table.
Report	VARCHAR2(132)	—	String used as the name of the HTML report.
ReportFile	VARCHAR2(132)	—	String used as a filename when the HTML report is generated.
TitleIconStr	VARCHAR2(132)	—	Filename of the .gif file that appears in the upper left corner of the table frame.
Help	VARCHAR2(132)	—	Help button on the table frame.
HelpStrFilterDlg	VARCHAR2(132)	—	Help button on the filter dialog box.
DbColCount	NUMBER(3)	—	Count of the number of columns in the database table or view.
TCAColIndex	NUMBER(3)	—	Index number of the threshold crossing alert (TCA). Number is usually -1, except for the PM tables where it is the index of the TCAColumn used to color the background of the cells in red.
DefSortCol	NUMBER(3)	—	Index of the default column. The table is presorted when it is launched the first time.
FilterMask	NUMBER(10)	—	Bit mask that contains bits for each tab in the filter dialog box.
AutoRef	NUMBER(1)	—	AutoRefresh = true if the table is updated automatically when an event occurs. AutoRefresh = false if the table is not updated automatically when an event occurs.
DispRowCount	NUMBER(3)	—	Total number of rows in the main table.
ColDispRow	NUMBER(3)	—	Total number of rows in the vertical table.
ColCount	NUMBER(3)	—	Total number of columns in the table.
BtnMask	NUMBER(20)	—	Bit mask that contains bits for each GUI table toolbar and for menu bar buttons.
NeDbaccessidcolindb	NUMBER(3)	DEFAULT -1	Database column index of the NEDBAccessId column in the respective view or table.

1.2.18  C_MetaData_Attr_Presentation

The C_MetaData_Attr_Presentation table (Table 1-18) stores information about ONS 15327 and ONS 15454 attributes. This information is used to lay out the property sheets in the NE Explorer.

Primary key: C_METADATA_ATTR_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-18 C_MetaData_Attr_Presentation 

Column Name	Oracle Data Type	Integrity Constraints	Description
METADATAINDEX	NUMBER(5)	NOT NULL	Metadata index of the event.
ATTRINDEX	NUMBER(5)	NOT NULL	Index of attribute.
WIDGET_ID	NUMBER(2)	NOT NULL	Values taken by widget IDs: 0: Default value 1: Text field 2: Password field 3: Subnet mask 4: IP address 5: Timing Communications and Control Card (TCC) Common Object Request Broker Architecture (CORBA) port 6: List 7: Check box 8: Combo box 9: Buttons 10: Combo text field 11: Button group 12: Dynamic combo box 13: Enum check box 14: Number field 15: Time field 16: Dynamic enum combo box 17: Time zone combo box 18: Soak time 19: Pattern text field 20: Spin editor 21: Fixed length string 22: Editor pane 23: Text area 24: Double spin editor 25: Slider 26: Letter or digit text field 27: Area ID text field 28: Enum Text Field 29: Dynamic Generic Combo Box

1.2.19  C_MetaData_Col

The C_MetaData_Col table (Table 1-19) stores overall information about all the columns in the CTM GUI.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-19 C_MetaData_Col 

Column Name	Oracle Data Type	Integrity Constraints	Description
TableID	NUMBER(4)	NOT NULL	ID in the parent table (C_MetaData).
ColName	VARCHAR2(50)	—	String used for the table header.
ColHeaderTip	VARCHAR2(350)	—	String used when you point your mouse over a column header.
ColWidth	NUMBER(4)	—	Width (in pixels) of the table column.
DisplayOrder	NUMBER(3)	—	Order in which the columns are displayed.
Sortable	NUMBER(1)	—	Specifies whether the table column is sortable.
Editable	NUMBER(1)	—	Specifies whether the cells in the column are editable.
DbColIndex	NUMBER(3)	—	Actual database column index for this GUI table column.
ClassName	VARCHAR2(128)	—	Renderer class used for the column.
FilterCol	NUMBER(3)	—	Specifies which columns are filterable.
SortColInDB	NUMBER(3)	—	Actual database column index used for sorting this GUI table column.
Renderer	VARCHAR2(128)	—	Used to display an icon instead of a value.
ColEnumBases	NUMBER(3)	—	Used to interpret the values from the database.
ColTCABitIndex	NUMBER(3)	—	Used for PM tables, which have a Threshold Crossing Alert (TCA) value.
ColSortOrder	NUMBER(1)	—	True if ascending; false if descending.
IsPhysicallocCol	NUMBER(1)	DEFAULT 0	Identifies a column as a physical location column.
IsInterfaceCol	NUMBER(1)	DEFAULT 0	Identifies a column as a logical interface location column.
IsTimestampCol	NUMBER(1)	DEFAULT 0	Identifies a column as a time stamp column.
IDENTIFIER	VARCHAR2 (1000)	—	Identifies whether or not a particular column is graphable.

1.2.20  C_MetaData_Filter

The C_MetaData_Filter table (Table 1-20) stores overall information about all the filters in the CTM GUI.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-20 C_MetaData_Filter 

Column Name	Oracle Data Type	Integrity Constraints	Description
TableID	NUMBER(4)	NOT NULL	ID in the parent table (C_MetaData).
FilterCols	NUMBER(3)	—	Index of a filterable column.
InitialFilterCols	NUMBER(3)	—	Index of a filterable column if this column is used in the initial filter. The value is -1 if it is not used in the initial filter.
DisplayOrder	NUMBER(3)	—	Order in which the columns are displayed.

1.2.21  C_MetaData_Grp_Presentation

The C_MetaData_Grp_Presentation table (Table 1-21) stores group information for ONS 15327 and ONS 15454. This information is used to lay out group attributes in NE Explorer property sheets.

Primary key: C_METADATA_GRP_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-21 C_MetaData_Grp_Presentation 

Column Name	Oracle Data Type	Integrity Constraints	Description
METADATAINDEX	NUMBER(5)	NOT NULL	Foreign key from ObjectAttributeTable.
GROUPINDEX	NUMBER(5)	NOT NULL	Attribute group.
PARENTINDEX	NUMBER(5)	NOT NULL	Parent group index.
NAME	VARCHAR2(32)	—	Group name.
DISPLAYTEXT	VARCHAR2(256)	—	User interface (UI) display text used as border text in a panel.
ATTRCLASS	NUMBER(4)	—	Not used (reserved for future use).
ATTRTYPE	NUMBER(4)	—	Not used (reserved for future use).
ENUMVAL	VARCHAR2(1024)	—	List of AATRIDs from ObjectAttributeTable that are children of this group. The IDs are separated by vertical bars (|).
ATTRGROUP	NUMBER(3)	—	User interface panel type.

1.2.22  C_MetaData_NETypes

The C_MetaData_NETypes table (Table 1-22) stores information about the supported NE types for the table identified in the C_MetaData table.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-22 C_MetaData_NETypes 

Column Name	Oracle Data Type	Integrity Constraints	Description
TableID	NUMBER(4)	NOT NULL	ID in the parent table (C_MetaData).
NETypes	VARCHAR2(15)	—	Models supported by this table.
DisplayOrder	NUMBER(3)	—	Order in which the columns are displayed.

1.2.23  C_Property_Sheet_Info_Table

The C_Property_Sheet_Info_Table (Table 1-23) stores metadata information for the various CTM property sheets.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-23 C_Property_Sheet_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModelIndex	NUMBER(4)	—	NE model index. Number in this column corresponds to a number in the Version_Table.
PropSheetIndex	NUMBER(4)	—	Number to identify a specific property sheet in the NE specified by the ModelIndex.
TabIndex	NUMBER(5)	—	Number to identify a tab in the property sheet. This number refers to TabIndex in the C_Tab_Metadata_Table.
TabPosition	NUMBER(2)	—	Number to identify the position of the tab in the property sheet.

1.2.24  C_Tab_Metadata_Info_Table

The C_Tab_Metadata_Info_Table (Table 1-24) stores information about the relationship between the tabs and subtabs in the CTM property sheets.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-24 C_Tab_Metadata_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TabIndex	NUMBER(5)	—	Number to identify a tab on the property sheet.
SubtabIndex	NUMBER(5)	—	Number to identify a subtab in the tab corresponding to the TabIndex.
SubtabPosition	NUMBER(2)	—	Number to identify the subtab position.

1.2.25  C_Tab_Metadata_Table

The C_Tab_Metadata_Table (Table 1-25) stores information about the tabs in the CTM property sheets.

Primary key: C_TAB_METADATA_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-25 C_Tab_Metadata_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TabIndex	NUMBER(5)	UNIQUE	Number to identify the tab on a property sheet.
TabName	VARCHAR2(200)	—	Name of the tab.
TabDataObjects	VARCHAR2(512)	—	Stores a list of data objects represented on the tab. The data objects in the list are separated by vertical bars (|). Each data object contains the following values, separated by a colon: ObjectIndex:MetaDataGroupIndex:GroupName:editable
Description	VARCHAR2(512)	—	Comment field.
OperationId	VARCHAR2 (128)	—	Key that is cross-referenced in the user's security profile, which stores the user's access for this tab.

1.2.26  Cerent_NE_Group_Table

The Cerent_NE_Group_Table (Table 1-26) indicates how the CTC-based NEs' discovered NEs are grouped based on the grouping rule.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-26 Cerent_NE_Group_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
GroupOption	NUMBER(1)	DEFAULT 0	Values are: 0: Default grouping 1: Group by discovered NE 2: Group by subnet

1.2.27  Circuit_Dest_Tbl

The Circuit_Dest_Tbl (Table 1-27) shows the end and drop points for network circuits.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-27 Circuit_Dest_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
CktNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit.
CktUniqueId	NUMBER(10)	NOT NULL	Unique number within each source node. The CktNodeId and CktUniqueId combine to form a circuit ID that is unique in the network. Note that these are internal fields and should not be displayed.
CktDestNodeId	NUMBER(10)	—	Destination node ID.
CktDestModuleType	NUMBER(8)	—	Module type at destination.
CktDestIfIndex	NUMBER(20)	—	Static index of the interface at the destination.
CktDestObjectType	NUMBER(10)	—	Object type at the destination.
CktDestPhysicalLoc	NUMBER(20)	—	Physical location of the destination node.
CktDestModelType	NUMBER(4)	—	Model type of the destination node.
CktDestDropProt	NUMBER(1)	—	Indicates whether the endpoint is protected. Values are: 0: False 1: True
CktDestPathProt	NUMBER(1)	—	Path protection for this drop. Values are: 0: Path fully protected 1: Path protected 2: Path unprotected 3: Path fully unprotected
CktDestDropProtType	NUMBER(1)	—	Protection type for ONS 15540: 0: No protection 1: Unknown protection 2: Splitter protection 3: Y-cable or line-card protection 4: Trunk card protection
CktDestPortName	VARCHAR2(64)	—	Destination port name of the circuit.
CktDestAdditionalInfo	VARCHAR2(64)	DEFAULT NULL	Additional information for the circuit destination.
NPID	NUMBER(10)	DEFAULT 0	Network partition ID.

1.2.28  Circuit_Size_Table

The Circuit_Size_Table (Table 1-28) contains information about the circuit sizes.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-28 Circuit_Size_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserId	NUMBER(4)	—	User ID.
CircuitSizeType	NUMBER(2)	—	Circuit size.
CircuitSizeId	NUMBER(2)	—	Circuit size ID.
CircuitSizeName	VARCHAR2(32)	—	Name of the circuit size.

1.2.29  Circuit_Span_Tbl

The Circut_Span_Tbl (Table 1-29) contains information about spans associated with circuits.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-29 Circuit_Span_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
CktSpanId	NUMBER(10)	NOT NULL	Unique sequence number generated by the database.
CktNodeId	NUMBER(10)	—	Node ID of the source node of the circuit to which the span belongs.
CktUniqueId	NUMBER(10)	—	Unique number within each source node. The CktNodeId and CktUniquieId combine to form a circuit ID that is unique in the network. Note that these are internal fields and should not be displayed.
CktLinkId	NUMBER(10)	—	ID of the link to which this span belongs.
CktSpanSrcNodeId	NUMBER(10)	—	Node ID of the span source.
CktSpanSrcModuleType	NUMBER(8)	—	Module type at the span source.
CktSpanSrcIfIndex	NUMBER(20)	—	Static index of the interface at the span source.
CktSpanSrcObjectType	NUMBER(10)	—	Object type at span source.
CktSpanSrcPhysicalLoc	NUMBER(20)	—	Physical location of the source node of the span.
CktSpanSrcModelType	NUMBER(4)	—	Model type for source node of span.
CktSpanDestNodeId	NUMBER(10)	—	Node ID of the span destination.
CktSpanDestModuleType	NUMBER(8)	—	Module type at the span destination.
CktSpanDestIfIndex	NUMBER(20)	—	Static index of the interface at the span destination.
CktSpanDestObjectType	NUMBER(10)	—	Object type at span destination.
CktSpanDestPhysicalLoc	NUMBER(20)	—	Physical location of the destination node of the span.
CktSpanDestModelType	NUMBER(4)	—	Model type for destination node of span.
CktSpanSrcState	NUMBER(1)	—	State of the circuit span from the source circuit node. Values are: 0: Inactive 1: Stranded 2: Routed 3: Tentative 4: Active
CktSpanDestState	NUMBER(1)	—	State of the circuit span from the destination circuit. Values are: 0: Inactive 1: Stranded 2: Routed 3: Tentative 4: Active
IsCktForwarding	NUMBER(1)	—	Indicates whether the circuit span is forwarding (for Ethernet circuit spans only): 0: False 1: True
IsCktSpanInUPSR	NUMBER(1)	—	Indicates whether the circuit span is part of a unidirectional path switched ring (UPSR) ring. Values are: 0: False 1: True
IsCktSpanWorking	NUMBER(1)	—	Indicates whether the circuit span is a working span. Values are: 0: False 1: True
IsCktSpanActive	NUMBER(1)	—	Indicates whether the circuit span carries active traffic. Values are: 0: False 1: True
CktSpanProtOp	NUMBER(1)	—	Last successful span protection operation performed on this span. Values are: 0: Clear 1: Manual 2: Force 3: Lockout
CktSpanAdditionalInfo	VARCHAR2(64)	DEFAULT NULL	Additional information for the circuit span.
CktSpanCDLFlowID	NUMBER(3)	DEFAULT -1	Source converged data link (CDL) flow identifier; applies only to ONS 15501, ONS 15530, and ONS 15540 circuits. Valid range is 0 to 254.
CktSpanSrcPortName	VARCHAR2(64)	—	Span source port name of the circuit.
CktSpanDestPortName	VARCHAR2(64)	—	Span destination port name of the circuit.
NPID	NUMBER(10)	DEFAULT 0	Network partition ID.

1.2.30  Circuit_Tbl

The Circuit_Tbl (Table 1-30) shows circuit information for an entire network.

Primary key: CIRCUIT_TBL_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-30 Circuit_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
CktNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit.
CktUniqueId	NUMBER(10)	NOT NULL	Unique number within each source node. The CktNodeId and CktUniqueId combine to form a circuit ID that is unique in the network. Note that these are internal fields and should not be displayed.
CktName	VARCHAR2(64)	—	Name of the circuit.
CktDescription	VARCHAR2(256)	—	Description of the circuit.
CustomerID	VARCHAR2(256)	—	Customer ID.
ServiceID	VARCHAR2(256)	—	Service ID.
CktType	NUMBER(2)	—	Circuit type. Values are: 0: Ethernet 1: Synchronous transport signal (STS) circuit 2: Virtual Tributary (VT) circuit 3: VT tunnel 4: VT aggregation 5: STS VCAT circuit 6: VT VCAT circuit 7: Gigabit Ethernet 8: 10-Gigabit Ethernet 9: Fiber channel 10: Fiber connectivity (FICON) 11: Enterprise System Connection (ESCON) 12: SDH circuit 13: Intersystem channel (ISC)-compatible 14: ISC peer 15: SYSPLEX 16: Dense wavelength division multiplexing (DWDM) transparent any 17: Virtual channel (VC) high order path circuit 18: VC low order path circuit 19: VC low order path tunnel
CktType (continued)	NUMBER(2)	—	20: VC low order path aggregation 21: VC high order VCAT circuit 22: VC low order VCAT circuit 23: DWDM wavelength 24: Fast Ethernet 25: FDDI 26: SYSPLEX_TIMER_ETR 27: SYSPLEX_TIMER_CLO 28: 10-Gigabit Ethernet wavelength 29: 2.5-Gigabit Ethernet wavelength 30: 10-Gigabit Ethernet trunk 31: SONET circuit 32: OCHNC circuit 33: Two_Gigabit_Ethernet 34: E1 circuit 35: T1 circuit
CktSize	NUMBER(2)	—	Size of the circuit. Values are: 0: VT 1.5 1: STS1 2: STS3C 3: STS6C 4: STS9C 5: STS12C 6: STS24C 7: STS48C 8: STS192C 9: STS768C 10: DWDM 2.5 G 11: DWDM 10 G 12: VC_11 13: VC_12 14: VC_3 15: VC_4
CktSize (continued)	NUMBER(2)	—	16: VC_4_2C 17: VC_4_3C 18: VC_4_4C 19: VC_4_8C 20: VC_4_16C 21: VC_4_64C 22: Fiber channel 1 23: Fiber channel 2 24: FICON 25: ESCON 26: SYSPLEX 27: Fast Ethernet 28: Gigabit Ethernet 29: 10-Gigabit Ethernet 30: FDDI 31: Optical CHannel Network Connection (OCHNC) not equipped 32: OCHNC multirate 33: OCHNC 2.5G FEC 34: OCHNC 2.5G NOFEC 35: OCHNC 10G FEC 36: OCHNC 10G NOFEC 37: STM 1C 38: STM 4C 39: STM 16C 40: STM 64C 41: ISC compatible 42: ISC peer 43: SYSPLEX_TIMER_ETR 44: SYSPLEX_TIMER_CLO 45: TWO_GIGABIT_ETHERNET 46: E1 47: T1
CktDirection	NUMBER(1)	—	Type of traffic that the circuit carries. Values are: 0: Unidirectional 1: Bidirectional
CktIsMonitor	NUMBER(1)	—	Indicates whether the circuit is a monitor circuit. Values are: 0: False 1: True
CktState	NUMBER(2)	—	State of the circuit. Values are: 0: Creating 1: Active 2: Deleting 3: Drop-pending 4: Incomplete 5: Upgradeable 6: Incomplete-upgradeable 7: Errored 8: Not upgradeable 9. Incomplete-not upgradeable 10: Roll-pending 11: Duplicate ID 12: Not activated
CktEnhancedState	NUMBER(2)	—	Administrative state of the circuit. Values are: 0: IS 1: OOS 2: OOS_MT 3: OOS_AINS 4: CES_NOT_DEFINED 5: OOS_PARTIAL 6: OOS_MT_PARTIAL 7: OOS_AINS_PARTIAL 8: IS_PARTIAL 9: UNKNOWN_ADMIN_STATE
CktProtectiontype	NUMBER(2)	—	Circuit protection type. Values are: 0: BLSR2F 1: OnePlusOne 2: NotDefined 3: UnProt 4: BLSR4F 5: PCA2F 6: PCA4F 7: NotDefined1 8: Protected 9: BLSR 10: UPSR 11: PCA 12: Lost 13: Unknown 14: None 15: UPSRDRI
CktSrcNodeId	NUMBER(10)	—	Source node ID.
CktSrcModuleType	NUMBER(8)	—	Module type at source.
CktSrcIfIndex	NUMBER(20)	—	Static index of the interface at the source.
CktObjectType	NUMBER(10)	—	Source object type.
CktSrcPhysicalLoc	NUMBER(20)	—	Source node physical location.
CktModelType	NUMBER(4)	—	Source node model type.
CktSrcDropProt	NUMBER(1)	—	Indicates whether the endpoint is protected. Values are: 0: False 1: True
CktSrcDropProtType	NUMBER(1)	—	Protection type for ONS 15540: 0: No protection 1: Unknown protection 2: Splitter protection 3: Y-cable or line-card protection 4: Trunk card protection
CktSecSrcNodeId	NUMBER(10)	—	Secondary source node ID.
CktSecSrcModuleType	NUMBER(8)	—	Module type at secondary source node.
CktSecSrcIfIndex	NUMBER(10)	—	Static index of the interface at the secondary source node.
CktSecSrcObjectType	NUMBER(10)	—	Secondary source object type.
CktSecSrcPhysicalLoc	NUMBER(20)	—	Secondary source node physical location.
CktSecSrcModelType	NUMBER(4)	—	Model type for the secondary source node.
CktSecSrcDropProt	NUMBER(1)	—	Indicates whether the secondary endpoint is protected. Values are: 0: False 1: True
CktSecSrcDropProtType	NUMBER(1)	—	Protection type for ONS 15540: 0: No protection 1: Unknown protection 2: Splitter protection 3: Y-cable or line-card protection 4: Trunk card protection
CktAdditionalInfo	VARCHAR2(64)	—	Additional information about the circuits.
CktDesNodeName	VARCHAR2(4000)	—	Node name of the circuit destination.
CktDestModuleName	VARCHAR2(4000)	—	Module name of the circuit destination.
CktDestPhysicalLoc	VARCHAR2(4000)	—	Physical location of the circuit destination.
CktDestModelType	VARCHAR2(4000)	—	Model type of the circuit destination.
CktDestIfIndex	VARCHAR2(4000)	—	Circuit destination node ifindex.
CktDestObjectType	VARCHAR2(4000)	—	Object type.
CktComment	VARCHAR2(2014)	—	Circuit comment.
CktSrcPortName	VARCHAR2(64)	—	Port name of the circuit source.
CktSecSrcPortName	VARCHAR2(64)	—	Port name of the circuit secondary circuit source.
CktDestPortName	VARCHAR2(4000)	—	Port name of the circuit destination.
CktUseLap	NUMBER(1)	—	Indicates if the circuit uses a lap. Values are: 0: False 1: True
CktOchncChannel	NUMBER(2)	—	Circuit OCHNC channel number. Values are: 0: Not applicable 1: OCHNC_30_33 2: OCHNC_31_12 3: OCHNC_31_90 4: OCHNC_32_68 5: OCHNC_34_25 6: OCHNC_35_04 7: OCHNC_35_82 8: OCHNC_36_61 9: OCHNC_38_19 10: OCHNC_38_98 11: OCHNC_39_77 12: OCHNC_40_56 13: OCHNC_42_14 14: OCHNC_42_94 15: OCHNC_43_73 16: OCHNC_44_53 17: OCHNC_46_12 18: OCHNC_46_92 19: OCHNC_47_72 20: OCHNC_48_51 21: OCHNC_50_12 22: OCHNC_50_92 23: OCHNC_51_72 24: OCHNC_52_52 25: OCHNC_54_13 26: OCHNC_54_94 27: OCHNC_55_75 28: OCHNC_56_55 29: OCHNC_58_17 30: OCHNC_58_98 31: OCHNC_59_79 32: OCHNC_60_61
CktOchncDir	NUMBER(1)	—	Direction of the OCHNC circuit. Values are: 0: East to west 1: West to east 2: Not applicable
isDuplicateName	NUMBER(1)	DEFAULT 1	Valid values are: 0: DUPLICATE 1: NOT_DUPLICATE
NPID	NUMBER(10)	DEFAULT 0	Network partition ID.

1.2.31  Circuit_VCG_Tbl

The Circuit_VCG_Tbl (Table 1-31) contains the inventory of virtual concatenation group circuits.

Primary key: none

Tablespace: BASE_DATA_TABLESPACE

Table 1-31 Circuit_VCG_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
CktNodeId	NUMBER(10)	NOT NULL	Node ID of the source circuit node.
CktUniqueId	NUMBER(10)	NOT NULL	Unique number within each source node. The combination of the CktNodeId and CktUniqueId result in a unique circuit ID in the whole network. Note that these are internal fields and should not be displayed.
ParentCktNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the parent VCAT circuit.
ParentCktUniqueId	NUMBER(10)	NOT NULL	Unique number within each source node. The combination of ParentCktNodeId and ParentCktUniqueId result in a unique circuit ID in the whole network. Note that these are internal fields and should not be displayed.
VCGDirection	NUMBER(1)	—	VCG direction. Values are: 0: None 1: Forward 2: Backward 3: Bidirectional
NPID	NUMBER(10)	DEFAULT 0	Network partition ID.

1.2.32  Circuit_VLAN_Tbl

The Circuit_VLAN_Tbl (Table 1-32) contains information about VLANs associated with circuits.

Primary key: CIRCUIT_VLAN_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-32 Circuit_VLAN_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
CktNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit.
CktUniqueId	NUMBER(10)	NOT NULL	Unique number within each source node. The CktNodeId and CktUniqueId combine to form a circuit ID that is unique in the network. Note that these are internal fields and should not be displayed.
CktVlanId	NUMBER(10)	—	VLAN ID.
CktVlanName	VARCHAR2(64)	—	VLAN name.
NPID	NUMBER(10)	DEFAULT 0	Network partition ID.

1.2.33  CLISession_Command_History_Tbl

The CLISession_Command_History_Tbl (Table 1-33) provides a list of commands used by a specific user in a CLI session.

Primary key: CLISESSION_COMMAND_HISTORY_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-33 CLISession_Command_History_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
SessionTag	VARCHAR2(32)	NOT NULL	Session tag.
UserName	VARCHAR2(64)	NOT NULL	Name of the user.
Command_History	VARCHAR2(256)	NOT NULL	Command history.

1.2.34  CORBA_Functions_Table

The CORBA_Functions_Table (Table 1-34) contains information about the different GateWay/CORBA function name and types.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-34 CORBA_Functions_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
InterfaceIndex	NUMBER(10)	NOT NULL	Interface to which the function belongs.
FunctionName	VARCHAR(32)	NOT NULL	Name of function.
FunctionType	NUMBER(10)	NOT NULL	Type of the function. Values are: 1: Read 2: Modify

1.2.35  CORBA_Interface_Table

The CORBA_Interface_Table (Table 1-35) contains information about the GateWay/CORBA interface.

Primary key: CORBA_INTERFACE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-35 CORBA_Interface_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
InterfaceIndex	NUMBER(10)	NOT NULL	Index used for mapping of operations.
InterfaceName	VARCHAR(32)	NOT NULL	Name of the interface.
AdditionalPermissions	NUMBER(1)	NOT NULL	Type of interface. Valid values are: 0: No permissions 1: All read 2: All write
HelperClass	VARCHAR(128)	NOT NULL	Helper class name used to get the repository ID.
BaseInterface	NUMBER(10	NOT NULL	Base interface.

1.2.36  CORBA_Permission_Table

The CORBA_Permission_Table (Table 1-36) contains information about the GateWay/CORBA interface operation permissions.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-36 CORBA_Permission_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
InterfaceIndex	NUMBER(10)	NOT NULL	Index of the CORBA interface.
OperationID	NUMBER(10)	NOT NULL	Operation ID from Operations_Table.

1.2.37  CTC_Model_Const_Table

The CTC_Model_Const_Table (Table 1-37) contains information about Cisco Transport Controller (CTC) models.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-37 CTC_Model_Const_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
CTCPackageName	VARCHAR2(40)	—	CTC package name.
CTCModel	VARCHAR2(40)	—	CTC model name.
CTMModel	VARCHAR2(128)	—	Corresponding CTM model name.
CTMObjectIndex	NUMBER(10)	—	Metadata object Index as defined in ObjectAttributeTable.
ModelType	NUMBER(10)	—	Model type as defined in Model_Type_Table.

1.2.38  CTC_UserProfile_Table

The CTC_UserProfile_Table (Table 1-38) contains information about CTC user profiles.

Primary key: CTC_USR_PROF_TABLE_PK

Tablespace: None

Table 1-38 CTC_UserProfile_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserID	VARCHAR2(64)	—	User ID of the CTC user type.
UserPassword	VARCHAR2(64)	NOT NULL	Password of the CTC user type.
PrivilegeID	NUMBER(10)	NOT NULL	Privilege ID of the CTC user type.
UserDesc	VARCHAR2(256)	NOT NULL	Description of the CTC user type.

1.2.39  CTM_Config_Table

The CTM_Config_Table (Table 1-39) stores CTM configuration information. For detailed definitions on the parameters within this table, refer to Appendix B, "CTM_Config_Table Parameters."

Primary key: ctm_config_table_pk

Tablespace: BASE_DATA_TABLESPACE

Table 1-39 CTM_Config_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
SectionName	VARCHAR2(40)	NOT NULL	Name of the section.
PropertyName	VARCHAR2(40)	NOT NULL	Name of the parameter.
ActiveValue	VARCHAR2(128)	—	Active value of the parameter.
IsPermanent	NUMBER(1)	NOT NULL	Indicates whether or not the value can be changed. Values are: 0: False 1: True
PermanentValue	VARCHAR2(128)	—	Permanent value of the parameter.

1.2.40  CTM_Unique_ObjectType_Table

The CTM_Unique_ObjectType_Table (Table 1-40) contains a list of unique object types.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-40 CTM_Unique_ObjectType_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ObjectType	NUMBER(10)	NOT NULL UNIQUE	Object type.
ObjectName	VARCHAR2(256)	NOT NULL	Object name of the object type.

1.2.41  DB_Pruning_Table

The DB_Pruning_Table (Table 1-41) contains information about the database pruning table.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-41 DB_Pruning_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
DBProcedure	VARCHAR(32)	NOT NULL	Name of the database procedure.
ConfigProperty	VARCHAR(32)	NOT NULL	Property name in the CTM_Config_Table.
MonitorParam	VARCHAR(32)	NOT NULL	Threshold parameter name in the Server_Threshold_Parameter_Table.

1.2.42  Debug_Module_Mapping_Table

The Debug_Module_Mapping_Table (Table 1-42) defines the mapping between classes and modules, and defines which class belongs to which module.

Primary key: none

Tablespace: BASE_DATA_TABLESPACE

Table 1-42 Debug_Module_Mapping_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
PackageOrClass	VARCHAR2(80)	—	Class or package name.
ModuleId	NUMBER(10)	NOT NULL	Module ID.

1.2.43  Debug_Module_Table

The Debug_Module_Table ( Table 1-43) contains a list of modules for module level debugging.

Primary key: DEBUG_MODULE_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-43 Debug_Module_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModuleId	NUMBER(10)	NOT NULL	Module ID.
ModuleName	VARCHAR2(40)	—	Name of module.
ConfigProperty	VARCHAR2(20)	—	Located under debug section in the CTM_Config_Table where the module severity is stored.

1.2.44  Deleted_User_Table

The Deleted_User_Table (Table 1-44) contains information about CTM users that were deleted.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-44 Deleted_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
username	VARCHAR2(64)	—	Username.
deletedtime	DATE	—	Date username was deleted.

1.2.45  Diskspace_Usage_Table

The Diskspace_Usage_Table (Table 1-45) stores information about database disk space usage.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-45 Diskspace_Usage_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
partitionname	NUMBER(2)	NOT NULL	Name of the partition. Values are: 0: oraclesw9i 1: db01 2: db02 3: db03 4: db04 5: db05
usage	NUMBER(3)	—	Database usage threshold.

1.2.46  Domain_Table

The Domain_Table (Table 1-46) contains information about the hierarchy of group and NE nodes in the domain.

Primary key: DOMAIN_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-46 Domain_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TreeNodeID	NUMBER(4)	NOT NULL	Unique sequence number generated by the database. Each node in the Domain Explorer tree is assigned a unique number that is used as an index to access group information in other tables.
ParentType	NUMBER(2)	NOT NULL	Indicates that the parent is a group.
ParentId	NUMBER(10)	NOT NULL	ID of the group.
ChildType	NUMBER(2)	NOT NULL	Type of tree node. Values are: 1: Root node 2: Group node 3: NE node
ChildId	NUMBER(10)	NOT NULL	ID of the group or NE.

1.2.47  Ems_Alarm_Table

The Ems_Alarm Table (Table 1-47) shows information about EMS alarms.

Primary key: EMS_ALARM_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-47 Ems_Alarm_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
Name	VARCHAR2(128)	—	Name of the alarm displayed to client.
alarmIndex	NUMBER(5)	—	EMS index of alarm or group.
isGroup	NUMBER(1)	—	Indicates whether or not this alarm belongs to a group. Values are: 0: FALSE 1: TRUE
Severity	NUMBER(1)	DEFAULT 4	Alarm severity. Values are: -1: NA 4: Warning 5: Minor 6: Major 7: Critical

1.2.48  Enum_Table

The Enum_Table (Table 1-48) is used by link management to display link information in the link table.

Primary key: ENUM_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-48 Enum_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
EnumBase	NUMBER(4)	—	Value of attribute base.
EnumInt	NUMBER(3)	—	Possible values of the attribute base.
UIValue	VARCHAR2(128)	—	String representation of attribute base.

1.2.49  EQPT_Info_Table

The EQPT_Info_Table (Table 1-49) stores equipment provisioning information.

Primary key: EQPT_INFO_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-49 EQPT_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(10)	NOT NULL	Database access ID; same as NEDBAccessID in the NE_Info_Table.
PHYSICALLOC	NUMBER(20)	NOT NULL	Physical location.
IFINDEX	NUMBER(20)	NOT NULL	Interface index.
MODULETYPE	NUMBER(8)	—	Module type.
OBJECTINDEX	NUMBER(10)	NOT NULL	Metadata object index.
MODELTYPE	NUMBER(4)	NOT NULL	Model type.
COL1	VARCHAR2(256)	—	Columns 1 to 250 store attribute values as defined by the metadata.
COL2	VARCHAR2(256)	—	Columns 1 to 250 store attribute values as defined by the metadata.
COL3	VARCHAR2(256)	—	Columns 1 to 250 store attribute values as defined by the metadata.
COL4	VARCHAR2(256)		Columns 1 to 250 store attribute values as defined by the metadata.
COL5	VARCHAR2(256)	—	Columns 1 to 250 store attribute values as defined by the metadata.
...
COL250	VARCHAR2(4000)	—	Columns 1 to 250 store attribute values as defined by the metadata.

1.2.50  Eqpt_Relationship_Table

The Eqpt_Relationship_Table (Table 1-50) contains information about the equipment relationship table.

Primary key: EQPT_RELATIONSHIP_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-50 Eqpt_Relationship_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(10)	NOT NULL	NE database access ID.
SELFPHYSICALLOC	NUMBER(20)	NOT NULL	Physical location (equipment 1).
SELFIFINDEX	NUMBER(20)	NOT NULL	If index (equipment 1).
SELFMODULETYPE	NUMBER(10)	NOT NULL	Module type (equipment 1).
SELFMODELTYPE	NUMBER(10)	NOT NULL	Model type.
SELFOBJECTINDEX	NUMBER(10)	NOT NULL	Object index.
SELFSTROBJINST	VARCHAR2(4000)	NOT NULL	—
RELATEDPHYSICALLOC	NUMBER(20)	NOT NULL	Physical location (equipment 2).
RELATEDIFINDEX	NUMBER(20)	NOT NULL	If index (equipment 2).
RELATEDMODULETYPE	NUMBER(10)	NOT NULL	Module type (equipment 2).
RELATEDMODELTYPE	NUMBER(10)	NOT NULL	Model type.
RELATEDOBJECTINDEX	NUMBER(10)	NOT NULL	Object index.
RELATEDSTROBJINST	VARCHAR2(4000)	NOT NULL	—

1.2.51  Error_Log_Table

The Error_Log_Table (Table 1-51) contains information about all errors reported by CTM.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-51 Error_Log_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TimeStamp	DATE	—	Time stamp of log message.
Module	NUMBER(2)	NOT NULL	One of the predefined modules. Values are: 1: ServiceWay 2: TL1 3: ThruWay 4: Transport Manager
Severity	NUMBER(2)	NOT NULL	Severity of error message. Values are: 1: Critical 2: Major 3: Minor 4: Informational
SubModule	NUMBER(2)	—	Submodules for modules.
FileName	VARCHAR2(256)	—	Name of the file from which the message was printed.
LineNumber	NUMBER(4)	—	Line number from which the message was printed.
LogMessage	VARCHAR2(1024)	—	Text of the error message.

1.2.52  Forwarding_Table

The Forwarding_Table is obsolete.

1.2.53  GNE_Table

The GNE_Table (Table 1-52) contains information about the various GNEs in the network.

Primary key: GNE_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-52 GNE_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
GNEID	NUMBER(4)	NOT NULL	GNE identifier. Unique sequence number generated by the database. This is the link between this table and GNEID in the NE_Info_Table.
GNEType	NUMBER(4)	DEFAULT 1	Values are: 1: Unknown 2: Self 3: ISR_as_GNE 4: Foreign_GNE_TL1 5: Foreign_GNE_CLNP 6: Foreign_GNE_IP
RINGID	NUMBER(8)	—	Identifies the ring to which the NE is connected. NEs with similar RING_IDs are in the same ring.
GNESysId	VARCHAR2(128)	NOT NULL	Name of the GNE.
NextHopIPAddr	NUMBER(10)	NOT NULL	IP address of the next hop used to reach the GNE.
GNEComment	VARCHAR2(512)	—	Comment for the GNE.
GroupOption	NUMBER(1)	DEFAULT 0	Values are: 0: Default grouping 1: Group by GNE 2: Group by Subnet
GroupPrefix	VARCHAR2(12)	—	Group prefix that may be used for group names.
UserID	NUMBER(4)	DEFAULT 0	Value of 0 means no owner.

1.2.54  Group_Info_Table

The Group_Info_Table (Table 1-53) contains information about all groups defined in the Domain Explorer tree.

Primary key: GROUP_INFO_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-53 Group_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
GroupID	NUMBER(4)	NOT NULL	ID of the group; a unique sequence number generated by the database.
GroupName	VARCHAR2(32)	UNIQUE NOT NULL	Name of the group.
GroupDescription	VARCHAR2(256)	—	Description field.
GroupUserLabel	VARCHAR2(64)	—	Users for this group.
GroupLocationName	VARCHAR2(64)	—	Location of this group.

1.2.55  HA_Table

The HA_Table (Table 1-54) provides a list of testing dates in a high-availability environment.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-54 HA_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TStamp	DATE	—	Test table for HA.

1.2.56  HFR_ACL_Policy_Config

The HFR_ACL_Policy_Config (Table 1-55) contains CRS-1 ACL policy configurations data.

Primary key: HFR_ACL_POLICY_CFG_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-55 HFR_ACL_Policy_Config 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(8)	NOT NULL	NE database access ID.
ACLNAME	VARCHAR2(32)	NOT NULL	—
ACLID	NUMBER(10)	NOT NULL	—
ACLGRANT	VARCHAR2(6)	—	—
ACLLOGGING	VARCHAR2(10)	—	—
SOURCEADDRESS	VARCHAR2(16)	—	—
SOURCEWILDCARDBITS	VARCHAR2(16)	—	—
DESTINATIONADDRESS	VARCHAR2(16)	—	—
DESTINATIONWILDCARDBITS	VARCHAR2(16)	—	—
ACLREMARK	VARCHAR2(256)	—	—
PROTOCOL	VARCHAR2(6)	—	—
DSCP	VARCHAR2(8)	—	—
PRECEDENCE	VARCHAR2(15)	—	—
SOURCEOPERATOR	VARCHAR2(12)	—	—
SOURCESTARTPORT	VARCHAR2(15)	—	—
SOURCEENDPORT	VARCHAR2(15)	—	—
DESTINATIONOPERATOR	VARCHAR2(12)	—	—
DESTINATIONSTARTPORT	VARCHAR2(15)	—	—
DESTINATIONENDREPORT	VARCHAR2(15)	—	—
TCPBITS	VARCHAR2(12)	—	—
ICMPMESSAGECODE	NUMBER(3)	—	—
ICMPMESSAGETYPE	NUMBER(3)	—	—
IGMPMESSAGETYPE	VARCHAR2(15)	—	—
CHECKFRAGMENTS	VARCHAR2(5)	—	—

1.2.57  HFR_BGP_PEER_PM_Table

Primary key: HFR_PM_BGP_PEER_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-56 HFR_BGP_PEER_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
BGPPeerTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThreshold Mask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
IPADDRESS	VARCHAR2(16)	NOT NULL	IP address.
INPUTMSGS	NUMBER(10)	DEFAULT -1	—
OUTPUTMSGS	NUMBER(10)	DEFAULT -1	—
INPUTUPDATEMSGS	NUMBER(10)	DEFAULT -1	—
OUTPUTUPDATEMSGS	NUMBER(10)	DEFAULT -1	—
CONNESTABLISHED	NUMBER(10)	DEFAULT -1	—
CONNDROPPED	NUMBER(10)	DEFAULT -1	—
ERRORSRECEIVED	NUMBER(10)	DEFAULT -1	—
ERRORSSENT	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.58  HFR_Common_Interface_Config

The HRF_Common_Interface_Config (Table 1-57) contains CRS-1 common interface configuration date, including Ethernet and POS.

Primary key: HFR_COM_INTF_CFG_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-57 HFR_Common_Interface_Config 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—
NEDBACCESSID	NUMBER(8)	NOT NULL	—
MAINIF	VARCHAR2(256)	—	—
OWNER	VARCHAR2(256)	—	—
DESCRIPTION	VARCHAR2(256)	—	—
IPADDRESS	VARCHAR2(16)	—	—
IPMASK	VARCHAR2(16)	—	—
CDP	NUMBER(1)	—	—
UNNUMBERED	VARCHAR2(256)	—	—
IPMTU	NUMBER(6)	—	—
ICMPMASKREPLY	NUMBER(1)	—	—
DIRECTEDBRDCAST	NUMBER(1)	—	—
DISABLEREDIRECTS	NUMBER(1)	—	—
DISABLEUNREACH	NUMBER(1)	—	—
DAMPENINGARGS	VARCHAR2(16)	—	—
HALFLIFE	NUMBER(2)	—	—
REUSETHRESHOLD	NUMBER(6)	—	—
SUPPRESSTHRESHOLD	NUMBER(6)	—	—
SUPPRESSTIME	NUMBER(3)	—	—
IFSHUTDOWN	NUMBER(1)	—	—

1.2.59  HFR_ETHER_Interface_Config

The HFR_ETHER_Interface_Config (Table 1-58) contains CRS-1 Ethernet interface configuration data.

Primary key: HFR_ETHER_INTF_CFG_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-58 HFR_ETHER_Interface_Confg 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(8)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—
FULLDUPLEX	NUMBER(1)	—	—
HALFDUPLEX	NUMBER(1)	—	—
ARPPROXY	NUMBER(1)	—	—
ARPTIMEOUT	NUMBER(8)	—	—
MACADDRESS	VARCHAR2(12)	—	—
MEDIATYPE	VARCHAR2(6)	—	—
SPEED	VARCHAR2(4)	—	—

1.2.60  HFR_Interface_DRC_PM_Table

Primary key: HFR_PM_INTERFACE_DRC_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-59 HFR_Interface_DRC_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
InterfaceDRCTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
IFNAME	VARCHAR2(64)	NOT NULL	Interface name.
INPUTDATARATE	NUMBER(10)	DEFAULT -1	—
INPUTPACKETRATE	NUMBER(10)	DEFAULT -1	—
OUTPUTDATARATE	NUMBER(10)	DEFAULT -1	—
OUTPUTPACKETRATE	NUMBER(10)	DEFAULT -1	—
INPUTPEAKRATE	NUMBER(10)	DEFAULT -1	—
INPUTPEAKPKTS	NUMBER(10)	DEFAULT -1	—
OUTPUTPEAKRATE	NUMBER(10)	DEFAULT -1	—
OUTPUTPEAKPKTS	NUMBER(10)	DEFAULT -1	—
BANDWIDTH	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.61  HFR_Interface_GC_PM_Table

Primary key: HFR_PM_INTERFACE_GC_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-60 HFR_Interface_GC_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
InterfaceGCTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
IFNAME	VARCHAR2(64)	NOT NULL	Interface name.
INPACKETS	NUMBER(10)	DEFAULT -1	—
INOCTETS	NUMBER(10)	DEFAULT -1	—
OUTPACKETS	NUMBER(10)	DEFAULT -1	—
OUTOCTETS	NUMBER(10)	DEFAULT -1	—
INUCASTPACKETS	NUMBER(10)	DEFAULT -1	—
INMULTICASTPACKETS	NUMBER(10)	DEFAULT -1	—
INBROADCASTPACKETS	NUMBER(10)	DEFAULT -1	—
OUTUCASTPACKETS	NUMBER(10)	DEFAULT -1	—
OUTMULTICASTPACKETS	NUMBER(10)	DEFAULT -1	—
OUTBROADCASTPACKETS	NUMBER(10)	DEFAULT -1	—
OUTPUTTOTALDROPS	NUMBER(10)	DEFAULT -1	—
INPUTTOTALDROPS	NUMBER(10)	DEFAULT -1	—
INPUTQUEUEDDROPS	NUMBER(10)	DEFAULT -1	—
INPUTUNKNOWNPROTO	NUMBER(10)	DEFAULT -1	—
OUTPUTTOTALERRORS	NUMBER(10)	DEFAULT -1	—
OUTPUTUNDERRUN	NUMBER(10)	DEFAULT -1	—
INPUTTOTALERRORS	NUMBER(10)	DEFAULT -1	—
INPUTCRC	NUMBER(10)	DEFAULT -1	—
INPUTOVERRUN	NUMBER(10)	DEFAULT -1	—
INPUTFRAME	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.62  HFR_Interface_Helper_Address

The HFR_Interface_Helper_Address (Table 1-61) is a subtable of HFR_Common_Interface_Config.

Primary key: HFR_COM_INTF_HELPADDR_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-61 HFR_Interface_Helper_Address 

Column Name	Oracle Data Type	Integrity Constraints	Description
IPADDRESS	VARCHAR2(16)	NOT NULL	Primary key and the actual helper IP address.
NEDBACCESS	NUMBER(8)	NOT NULL	—
ENABLED	NUMBER(1)	—	Boolean status for the helper IP address.
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—

1.2.63  HFR_Interface_MTU_Layer2

Primary key: HFR_COM_INTF_MTULAYER2_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-62 HFR_Interface_MTU_Layer2 

Column Name	Oracle Data Type	Integrity Constraints	Description
OWNER	VARCHAR2(16)	NOT NULL	—
NEDBACCESSID	NUMBER(8)	NOT NULL	—
MTUVALUE	NUMBER(16)	—	—
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—

1.2.64  HFR_Interface_Secondary_Addr

The HFR_Interface_Secondary_Addr (Table 1-63) is a subtable of HFR_Common_Interface_Config.

Primary key: HFR_COM_INTF_SECONDADDR_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-63 HFR_Interface_Secondary_Addr 

Column Name	Oracle Data Type	Integrity Constraints	Description
IPADDRESS	VARCHAR2(16)	NOT NULL	Primary key and the actual secondary IP address.
NEDBACCESSID	NUMBER(8)	NOT NULL	—
IP MASK	VARCHAR2(16)	—	IP address representing the subnet mask.
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—

1.2.65  HFR_MPLS_Interface_PM_Table

Primary key: HFR_PM_MPLS_INTERFACE_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-64 HFR_MPLS_Interface_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
MPLSInterfaceTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
IFNAME	VARCHAR2(64)	NOT NULL	Interface name.
FAILEDLABELLOOKUP	NUMBER(10)	DEFAULT -1	—
FRAGMENTEDPKTS	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.66  HFR_MPLS_LDP_PM_Table

Primary key: HFR_PM_MPLS_LDP_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-65 HFR_MPLS_LDP_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
MPLSLDPTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
IPADDRESS	VARCHAR2(16)	NOT NULL	IP address
TOTALMSGSSENT	NUMBER(10)	DEFAULT -1	—
TOTALMSGSRCVD	NUMBER(10)	DEFAULT -1	—
INITMSGSSENT	NUMBER(10)	DEFAULT -1	—
INITMSGSRCVD	NUMBER(10)	DEFAULT -1	—
ADDRESSMSGSSENT	NUMBER(10)	DEFAULT -1	—
ADDRESSMSGSRCVD	NUMBER(10)	DEFAULT -1	—
ADDRESSWITHDRAWMSGSSENT	NUMBER(10)	DEFAULT -1	—
ADRESSWITHDRAWMSGSRCVD	NUMBER(10)	DEFAULT -1	—
LABELMAPPINGMSGSSENT	NUMBER(10)	DEFAULT -1	—
LABELMAPPINGMSGSRCVD	NUMBER(10)	DEFAULT -1	—
LABELWITHDRAWMSGSSENT	NUMBER(10)	DEFAULT -1	—
LABELWITHDRAWMSGSRCVD	NUMBER(10)	DEFAULT -1	—
LABELRELEASEMSGSSENT	NUMBER(10)	DEFAULT -1	—
LABELRELEASEMSGSRCVD	NUMBER(10)	DEFAULT -1	—
NOTIFICATIONMSGSSENT	NUMBER(10)	DEFAULT -1	—
NOTIFICATIONMSGSRCVD	NUMBER(10)	DEFAULT -1	—
KEEPALIVEMSGSSENT	NUMBER(10)	DEFAULT -1	—
KEEPALIVEMSGSRCVD	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.67  HFR_MPLS_TE_Link_PM_Table

Primary key: HFR_PM_MPLS_TE_LINK_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-66 HFR_MPLS_TE_Link_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
MPLSTETimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
IFNAME	VARCHAR2(64)	NOT NULL	Interface name.
LINKUTILIZATION	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.68  HFR_MPLS_TE_Tunnel_PM_Table

Primary key: HFR_PM_MPLS_TE_TUNNEL_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-67 HFR_MPLS_TE_Link_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
MPLSTETunnelTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
IFNAME	VARCHAR2(64)	NOT NULL	Interface name.
INPUTDATARATE	NUMBER(10)	DEFAULT -1	—
INPUTPACKETRATE	NUMBER(10)	DEFAULT -1	—
OUTPUTDATARATE	NUMBER(10)	DEFAULT -1	—
OUTPUTPACKETRATE	NUMBER(10)	DEFAULT -1	—
INPUTPEAKRATE	NUMBER(10)	DEFAULT -1	—
INPUTPEAKPKTS	NUMBER(10)	DEFAULT -1	—
OUTPUTPEAKRATE	NUMBER(10)	DEFAULT -1	—
OUTPUTPEAKPKTS	NUMBER(10)	DEFAULT -1	—
BANDWIDTH	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.69  HFR_Node_CPU_PM_Table

Primary key: HFR_PM_NODE_CPU_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-68 HFR_Node_CPU_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
NodeCPUTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
NODEID	NUMBER(10)	NOT NULL	Node ID.
NUMPROCESSES	NUMBER(10)	DEFAULT -1	—
AVERAGECPUUSED	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.70  HFR_Node_Memory_PM_Table

Primary key: HFR_PM_NODE_MEMORY_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-69 HFR_Node_Memory_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
NodeMemoryTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
NODEID	NUMBER(10)	NOT NULL	Node ID.
APPMEMORY	NUMBER(10)	DEFAULT -1	—
PEAKMEMORY	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.71  HFR_Node_Process_PM_Table

Primary key: HFR_PM_NODE_PROCESS_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-70 HFR_Node_Process_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
NodeProcessTimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value (information about the PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was in Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket during the 15-minute interval.
oneDayThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket of the day.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is for 24-hour or 15-min interval. Valid values are: 1: 24 hour 0: 15 minutes
NODEID	NUMBER(10)	NOT NULL	Node ID.
PROCESSID	NUMBER(10)	NOT NULL	Process ID.
TOTALMEMORY	NUMBER(10)	DEFAULT -1	—
AVERAGECPUUSED	NUMBER(10)	DEFAULT -1	—
NUMTHREADS	NUMBER(10)	DEFAULT -1	—
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.72  HFR_POS_Interface_Config

The HFR_POS_Interface_Config (Table 1-71) contains CRS-1 POS (Packet Over SONET) interface configuration data.

Primary key: HFR_POS_INTF_CFG_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-71 HFR_POS_Interface_Config 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(8)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—
ENCAPTYPE	VARCHAR2(5)	—	—
ENCAPUNUSED	NUMBER(10)	—	—
PPPAUTHATTEMPTS	NUMBER(2)	—	—
MAXUNACKCONFREQS	NUMBER(2)	—	—
MAXCONSECCONFNAKS	NUMBER(2)	—	—
MAXUNACKTERMREQS	NUMBER(2)	—	—
PAPCHECK	NUMBER(1)	—	—
CHAPCHECK	NUMBER(1)	—	—
MSCCHECK	NUMBER(1)	—	—
AUTHLIST	VARCHAR2(256)	—	—
AUTHTIMEOUT	NUMBER(2)	—	—
NCPTIMEOUT	NUMBER(3)	—	—
FSMRETRY	NUMBER(2)	—	—
PAPREFUSE	VARCHAR2(8)	—	—
PAPUSERNAME	VARCHAR2(128)	—	—
PAPPROPPASSWORD	VARCHAR2(128)	—	—
CHAPREFUSE	VARCHAR2(8)	—	—
CHAPHOSTNAME	VARCHAR2(128)	—	—
CHAPPROPPASSWORD	VARCHAR2(128)	—	—

1.2.73  HFR_SONET_Interface_Config

The HFR_SONET_Interface_Config (Table 1-72) contains CRS-1 SONET controllers configuration data.

Primary key: HFR_SONET_INTF_CFG_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-72 HFR_SONET_Interface_Config 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(8)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—
SONETCREATED	NUMBER(1)	—	—
SONETPORTCLOCKSOURCE	VARCHAR2(10)	—	—
SONETPORTFRAMING	VARCHAR2(5)	—	—
SONETPORTLOOPBACK	VARCHAR2(10)	—	—
TXJ0	NUMBER(3)	—	—
TXS1S0	NUMBER(1)	—	—
LINEHOLDOFFDELAY	NUMBER(3)	—	—
SONETPORTSHUTDOWNAIS	NUMBER(1)	—	—
PATHNUM	NUMBER(10)	—	—
B1BERTHRESHOLD	NUMBER(1)	—	—
SDBERTHRESHOLD	NUMBER(1)	—	—
SFBERTHRESHOLD	NUMBER(1)	—	—
DISABLEREPORTB1BER	NUMBER(1)	—	—
DISABLEREPORTSLOF	NUMBER(1)	—	—
DISABLEREPORTSLOS	NUMBER(1)	—	—
REPORTSDBER	NUMBER(1)	—	—
DISABLEREPORTSFBER	NUMBER(1)	—	—
B2BERTHRESHOLD	NUMBER(1)	—	—
REPORTLAIS	NUMBER(1)	—	—
DISABLEREPORTB2BER	NUMBER(1)	—	—
REPORTLRDI	NUMBER(1)	—	—

1.2.74  HFR_SONET_Interface_Path

The HFR_SONET_Interface_Path (Table 1-73) is a subtable of HFR_SONET_Interface_Config.

Primary key: HFR_SONET_INTF_PATHREC_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-73 HFR_SONET_Interface_Path 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(8)	NOT NULL	—
IFID	VARCHAR2(256)	NOT NULL	—
IFACTIVE	VARCHAR2(3)	NOT NULL	—
PATHNUM	NUMBER(10)	NOT NULL	Primary key and the path number associated with the SONET interface.
PATHCREATED	NUMBER(1)	—	—
PATHHOLDOFFDELAY	NUMBER(3)	—	—
SONETPATHSCRAMBLING	VARCHAR2(8)	—	—
TXC2	NUMBER(4)	—	—
TXJ1	VARCHAR2(64)	—	—
SONETPATHSHUTDOWNAIS	NUMBER(1)	—	—
SONETPATHSHUTDOWNUNEQ	NUMBER(1)	—	—
B3BERTHRESHOLD	NUMBER(1)	—	—
REPORTPAIS	NUMBER(1)	—	—
DISABLEREPORTB3BER	NUMBER(1)	—	—
DISABLEREPORTPLOP	NUMBER(1)	—	—
REPORTPRDI	NUMBER(1)	—	—
REPORTPUNEQ	NUMBER(1)	—	—

1.2.75  HFR_Version_Info

The HFR_Version_Info (Table 1-74) is used to store various XML schema version information in the database.

Primary key: HFR_VERSION_INFO_PK

Tablespace: HFR_DATA_TABLESPACE

Table 1-74 HFR_Version_Info 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(8)	NOT NULL	Unique NE identifier.
Space	NUMBER(8)	NOT NULL	Integer representing the corresponding sysdb space for the schema.
SUBSTRINDEX	NUMBER(8)	NOT NULL	Value used to index any required substring. It starts from 0 and increments by 1.
VersionXML	VARCHAR2(4000)	—	Actual XML string returned from the router (CRS-1).

1.2.76  IF_Cross_Connect

The IF_Cross_Connect table (Table 1-75) contains information about cross-connects between interfaces on the same network element. Point-to-point (p2p) and point-to-multipoint (p2mp) are supported.

Primary key: None

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-75 IF_Cross_Connect 

Column Name	Oracle Data Type	Integrity Constraints	Description
XCDBAccessID	NUMBER(10)	NOT NULL	Unique sequence number (can be a foreign key).
NEDBAccessId	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
SrcIFDBAccessID	NUMBER(10)	NOT NULL	Source interface endpoint.
DestIFDBAccessID	NUMBER(10)	NOT NULL	Destination interface endpoint.
XCType	NUMBER(2)	DEFAULT 4	Type of switching element used: 1: Unknown 2: Electrical cross-connect 3: Optical cross-connect 4: Autoselect
XCKind	NUMBER(2)	DEFAULT 5	Type of call control to establish cross-connect: 1: Provisioned 2: Automatic 3: Dynamic 4: Protection 5: Other
CreationTime	DATE	—	Time when this cross-connect was created.
Src2DestOperStatus	NUMBER(2)	NOT NULL	Operational state from source to destination: 1: Up 2: Down 3: Dormant 4: Unknown
Dest2SrcOperStatus	NUMBER(2)	NOT NULL	Operational state from destination to source: 1: Up 2: Down 3: Dormant 4: Unknown
Src2DestLastChange	DATE	—	Sysuptime value when the cross-connect in this direction changed its operational state.
Dest2SrcLastChange	DATE	—	Sysuptime value when the cross-connect in this direction changed its operational state.

1.2.77  IF_DWDM_Channel_Group

The IF_DWDM_Channel_Group table (Table 1-76) contains information about interfaces representing groups of DWDM channels.

Primary key: IF_DWDM_CHAN_FREQ_PK

Tablespace:ONS155XX_DATA_TABLESPACE

Table 1-76 IF_DWDM_Channel_Group 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	Reference to IFDBAccessID in the MIB2_Interface_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
MinFrequency	NUMBER(10)	NOT NULL	Lowest frequency in the bitmap for bit 0.
Spacing	NUMBER(4)	NOT NULL	Frequency spacing between successive bits.
BitmapLogic	NUMBER(2)	DEFAULT 1	Indicates whether frequencies in the bitmap are carried or blocked. Values are: 1: Carried 2: Blocked
Bitmap	VARCHAR2(64)	NOT NULL	List of frequencies as a bitmap.

1.2.78  IF_Optical_Phy_Config_Table

The IF_Optical_Phy_Config_Table (Table 1-77) describes extended physical properties for certain interfaces.

Primary key: IF_OPTICAL_PHY_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-77 IF_Optical_Phy_Config_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	Reference to IFDBAccessID in the MIB2_Interface_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
IfMode	NUMBER(2)	DEFAULT 1	Mode of operation. Values are: 1: mode2R 2: mode3R
IfProtocol	NUMBER(2)	DEFAULT 1	Client-side protocol to be monitored. Values are: 1: Other 2: Unknown 3: Gigabit Ethernet 4: 10-Gigabit Ethernet 5: Fiber channel 6: FICON 7: ESCON 8: SONET
IfClockRate	NUMBER(4)	—	Clock rate for client interface.
IfMonitorState	NUMBER(1)	—	Monitor state. Values are: 1: Enabled 2: Disabled
IfLoopback	NUMBER(2)	DEFAULT 1	Loopback status. Values are: 1: No loop 2: Diagnostic loop 3: Line loop 4: Other loop
IfOFC	NUMBER(1)	—	OFC state. Values are: 1: Enabled 2: Disabled
IfLaserSafteyControl	NUMBER(1)	—	Trunk-side laser safety control (LSC) state. Values are: 1: Enabled 2: Disabled
IfFLC	NUMBER(1)	—	State of forward laser control (FLC). Values are: 1: Enabled 2: Disabled

1.2.79  IFIndex_Rule_Table

The IFIndex_Rule_Table (Table 1-78) contains information on the rules to construct the IfIndex for each object type of an NE model.

Primary key: IFINDEX_RULE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-78 IFIndex_Rule_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModelType	NUMBER(10)	NOT NULL	Model type
ObjectType	NUMBER(10)	NOT NULL	Object type
AttributeNameConst	NUMBER(10)	NOT NULL	Integer constant of the attribute
AttrOrder	NUMBER(10)	NOT NULL	Sequential number
AttrSize	NUMBER(10)	NOT NULL	Size of the attribute in bytes
AttrType	NUMBER(10)	NOT NULL	Type of the attribute

1.2.80  Interface_APS_Info

The Interface_APS_Info table (Table 1-79) contains APS information for interfaces that are members of an APS group.

Primary key: IF_APS_INFO_PK

Tablespace:ONS155XX_DATA_TABLESPACE

Table 1-79 Interface_APS_Info 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	Reference to IFDBAccessID in the MIB2_Interface_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ApsGroupName	VARCHAR2(64)	—	APS group name.
ApsChanNumber	NUMBER(2)	DEFAULT -1	Working or protected channel.
ApsChanStatusCurrent	NUMBER(2)	DEFAULT -1	Current state of interface in the group: 1: Locked out 2: Signal degrade 3: Signal failure 4: Switched
ApsChanLastSwitchover	DATE	—	Time since switch to protection channel.
ApsInterfaceState	NUMBER(2)	DEFAULT -1	Active or standby: -1: Unknown 1: Active 2: Standby

1.2.81  Interface_DWDM_Frequency

The Interface_DWDM_Frequency table (Table 1-80) contains wavelength information for certain optical interfaces carrying DWDM frequencies.

Primary key: IF_DWDM_FREQ_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-80 Interface_DWDM_Frequency 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	Reference to IFDBAccessID in the MIB2_Interface_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
Frequency	NUMBER(10)	NOT NULL	DWDM frequency.

1.2.82  Interface_Stack_Table

The Interface_Stack_Table (Table 1-81) provides information about underlying and overlaying layer relationships between interfaces.

Primary key: IFSTACK_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-81 Interface_Stack_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UniqueID	NUMBER(10)	NOT NULL	Unique sequence number. Acts as foreign key.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
HighIfDBAccessID	NUMBER(10)	NOT NULL	IFDBAccessID at the higher layer in the stack.
LowIfDBAccessID	NUMBER(10)	NOT NULL	IFDBAccessID at the lower layer in the stack.
Status	NUMBER(2)	NOT NULL	Operational state of lower layer. Values are: 1: Up 2: Down 3: Testing 4: Unknown 5: Dormant 6: Not present 7: Lower layer down

1.2.83  Interface_Table

The Interface_Table (Table 1-82) contains static interface indexes and names for an NE managed by CTM.

Primary key: INTERFACE_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-82 Interface_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEType	NUMBER(1)	NOT NULL	Type of NE. Values are: -1: Common ifNames Any-other-number: NEModelIndex of the NE_Info_Table
ifStaticIndex	NUMBER(4)	NOT NULL	Interface table static index; unique value for each interface on the NE.
ifName	VARCHAR2(64)	NOT NULL	Name of the interface.

1.2.84  IOS_Parser_Static_Tree_Table

The IOS_Paerser_Static_Tree_Table (Table 1-83) contains information about the IOS parser static tree table.

Primary key: IOS_PARSER_STATIC_TREE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-83 IOS_Parser_Static_Tree_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModelIndex	NUMBER(8)	NOT NULL	Model index for the static tree.
IOSModelName	VARCHAR(128)	NOT NULL	Index of the static tree.
NodeIndex	NUMBER(8)	NOT NULL	Index of the node.
ParentIndex	NUMBER(8)	NOT NULL	Parent node index: -1 for the root node.
NodeName	VARCHAR(128)	NOT NULL	Name of the IOS node.
NodeValue	VARCHAR(128)	—	Value of the nodes.
CTMAttributeName	VARCHAR(128)	—	Corresponding CTM attribute name.
AttributeLocation	NUMBER(8)	NOT NULL	Position of the attribute in the object index.

1.2.85  L2_FrontPort_Table

The L2_FrontPort_Table (Table 1-84) contains information about the L2 front port table.

Primary key: L2_FRONTPORT_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-84 L2_FrontPort_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEID	NUMBER(10)	NOT NULL	NE ID.
SLOT_NUMBER	NUMBER(2)	NOT NULL	Slot number.
PORT_NUMBER	NUMBER(2)	NOT NULL	Port number.
NNI	NUMBER(1)	—	Port type.
UNI	NUMBER(1)	—	Port type.
DOT1Q	NUMBER(1)	—	Connection type.
QINQ	NUMBER(1)	—	Connection type.
UNTAGGED	NUMBER(1)	—	Connection type.
BG_COUNT	NUMBER(3)	—	—
SUB_IF_COUNT	NUMBER(3)	—	—
PORT_STATE	NUMBER(1)	—	Port state. Valid values are: 0: PORT_STATE_DISABLED 1: PORT_STATE_ENABLED
PM_STATUS	NUMBER(1)	—	—

1.2.86  L2_Interface_QoSClass_Table

The L2_Interface_QoSClass_Table (Table 1-85) stores all the QoS parameters that are configured on a Layer 2 service drop. The Layer 2 services are configured on a Layer 2 topology. The table is populated when a new Layer 2 service is created or discovered in CTM.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-85 L2_Interface_QoSClass_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEID	NUMBER(10)	NOT NULL	NE ID.
Slot_Number	NUMBER(3)	NOT NULL	Slot number.
Bridge_Group_Number	NUMBER(3)	NOT NULL	Bridge group number.
Port_Number	NUMBER(2)	NOT NULL	Port number.
Port_Sub_Interface	NUMBER(4)	—	Subinterface number on the port.
MATCH_ANY	NUMBER(1)	—	Matches any traffic.
MATCH_DSCP	NUMBER(1)	—	Matches the DSCP. DSCP value needs to be specified.
MATCH_COS	NUMBER(1)	—	Matches the class of service.
MATCH_IP_PRECEDENCE	NUMBER(1)	—	Matches the IP precedence value.
MATCH_DSCP_VALUE	VARCHAR2(64)	—	DSCP value is used with Match_DSCP.
MATCH_COS_VALUE	VARCHAR2(32)	—	COS value is used with Match_COS.
MATCH_IP_PRECEDENCE_V ALUE	VARCHAR2(32)	—	IP precedence value is used with Match_IP_Precedence.
ANDOR	NUMBER(1)	—	And/or condition.
CLASS_NAME	VARCHAR2(60)	—	Name of class map.
CIR_TYPE	NUMBER(2)	—	CIR type. Values are: 0: Line rate CIR 1: Rate-limited CIR
MAX_RATE_KBPS	NUMBER(20)	—	Maximum allowed rate in kbps.
BURST_SIZE_BPS	NUMBER(20)	—	Size of the burst in bps.
CIR_COS_TYPE	NUMBER(2)	—	Committed CoS mark type. Values are: 0: Trust 1: Mark CoS
CIR_COS_VALUE	NUMBER(2)	—	If CIR_COS_TYPE is 1 then this is the CoS value.
EXCESS_ACTION	NUMBER(2)	—	Excess traffic action. Values are: 0: Discard 1: Allow
PIR_BURST_BPS	NUMBER(20)	—	Peak information rate burst value in bps.
PIR_KBPS	NUMBER(20)	—	Peak information rate in kbps.
PIR_COS_TYPE	NUMBER(2)	—	PIR CoS type. Values are: 0: Trust 1: Mark CoS
PIR_COS_VALUE	NUMBER(2)	—	PIR CoS marking value.
VIOLATE_ACTION	NUMBER(2)	—	Violate action. Values are: 0: Discard 1: Allow
VIOLATE_COS_VALUE	NUMBER(2)	—	CoS marking for violation traffic.
BEFF_TYPE	NUMBER(2)	—	Best effort type. Values are: 0: Line rate 1: Rate limited
BEFF_RATE_KBPS	NUMBER(20)	—	Best effort maximum rate in kbps.
BEFF_BURST_SIZE_BPS	NUMBER(20	—	Best effort burst size in bps.

1.2.87  L2_Interface_Table

The L2_Interface_Table (Table 1-86) contains information about the L2 interface table.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-86 L2_Interface_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEID	NUMBER(10)	NOT NULL	NE ID.
SLOT_NUMBER	NUMBER(3)	NOT NULL	Slot number.
BRIDGE_GROUP_NUMBER	NUMBER(3)	NOT NULL	Bridge group number.
PORT_NUMBER	NUMBER(2)	NOT NULL	Port number.
PORT_SUB_INTERFACE	NUMBER(4)	—	Port subinterface.
COMMITED_RATE_KBPS	NUMBER(20)	—	Committed rate in kilobytes per second.
INTERFACE_NAME	VARCHAR2(30)	—	Interface name.
INTERFACE_TYPE	NUMBER(3)	—	Interface type: 1: POS 2: FASTETHERNET 3: GIGABITETHERNET
PORT_TYPE	NUMBER(2)	—	Port types: 1: UNI 2: NNI
CONNECTION_TYPE	NUMBER(2)	—	Connection types: 1: QinQ 2: Dot1Q 3: Untagged
PORT_STATE	NUMBER(2)	—	Port state. Valid values are: 0: PORT_STATE_DISABLED 1: PORT_STATE_ENABLED
CIR_BURST_BPS	NUMBER(20)	—	Committed information rate burst value.
PIR_BURST_PBS	NUMBER(20)	—	Peak information rate burst value.
QOS_POLICING	NUMBER(1)	—	QoS policy configured on the selected front port interface or subinterface. Valid values are: 0: Unknown 1: Best effort 2: CIR/PIR The default is 1.
PIR_KBPS	NUMBER(20)	—	Peak information rate.
CIR_KBPS	NUMBER(20)	—	Committed information rate.
BEFF_MAXVALUE	NUMBER(20)	—	Best effort maximum value.
BEFF_BURST	NUMBER(20)`	—	Maximum best effort burst value.

1.2.88  L2QoSTemplate_QoSClass_Table

The L2QoSTemplate_QoSClass_Table (Table 1-87) is used to store all the Quality of Service (QoS) parameters defined in a QoS profile. QoS profiles are used during Layer 2 services creation to specify the QoS parameters for the service drops.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-87 L2QoSTemplate_QoSClass_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
QoSTemplateID	NUMBER(6)	NOT NULL	QoS template ID.
MATCH_ANY	NUMBER(1)	—	Matches any traffic.
MATCH_DSCP	NUMBER(1)	—	Match DSCP. DSCP value needs to be specified.
MATCH_COS	NUMBER(1)	—	Match class of service.
MATCH_IP_PRECEDENCE	NUMBER(1)	—	Match IP precedence value.
MATCH_DSCP_VALUE	VARCHAR2(64)	—	DSCP value is used along with Match_DSCP.
MATCH_COS_VALUE	VARCHAR2(32)	—	COS value is used along with Match_COS.
MATCH_IP_PRECEDENCE_V ALUE	VARCHAR2(32)	—	IP precedence value is used along with Match_IP_Precedence.
ANDOR	NUMBER(1)	—	And/or condition.
CLASS_NAME	VARCHAR2(60)	—	Name of class map.
CIR_TYPE	NUMBER(2)	—	CIR type. Values are: 0: Line rate CIR 1: Rate-limited CIR
MAX_RATE_KBPS	NUMBER(20)	—	Maximum allowed rate in kbps.
BURST_SIZE_BPS	NUMBER(20)	—	Size of the burst in bps.
CIR_COS_TYPE	NUMBER(2)	—	Committed CoS mark type. Values are: 0: Trust 1: Mark CoS
CIR_COS_VALUE	NUMBER(2)	—	If CIR_COS_TYPE is 1 then this is the CoS value.
EXCESS_ACTION	NUMBER(2)	—	Excess traffic action. Values are: 0: Discard 1: Allow
PIR_BURST_BPS	NUMBER(20)	—	Peak information rate burst value in bps.
PIR_KBPS	NUMBER(20)	—	Peak information rate in kbps.
PIR_COS_TYPE	NUMBER(2)	—	PIR CoS types. Values are: 0: Trust 1: Mark CoS
PIR_COS_VALUE	NUMBER(2)	—	PIR CoS marking value.
VIOLATE_ACTION	NUMBER(2)	—	Violate action. Values are: 0: Discard 1: Allow
VIOLATE_COS_VALUE	NUMBER(2)	—	CoS marking for violation traffic.
BEFF_TYPE	NUMBER(2)	—	Best effort type. Values are: 0: Line rate 1: Rate limited
BEFF_RATE_KBPS	NUMBER(20)	—	Best effort maximum rate in kbps.
BEFF_BURST_SIZE_BPS	NUMBER(20	—	Best effort burst size in bps.

1.2.89  L2QoSTemplate_Table

The L2QoSTemplate_Table (Table 1-88) contains information about the L2 QoS template.

Primary key: L2QOSTEMPLATE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-88 L2QoSTemplate_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
QoSTemplateID	NUMBER(6)	NOT NULL	QoS template ID.
QoSTemplateName	VARCHAR2(50)	NOT NULL	Unique name of the QoS template.
QoSTemplateType	NUMBER(2)	—	QoS template types: 1: BEST_EFFORT 2: CIR_PIR 3: ADVANCED
QoSTemplateDescription	VARCHAR2(50)	—	QoS template description.

1.2.90  L2Topology_Circuits_Table

The L2Topology_Circuits_Table (Table 1-89) contains information about the L2 Topology Table.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-89 L2Topology_Circuits_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TopoNodeID	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit where Point-to-Point topology is used. Where Shared Packet Ring (SPR) is used, it is the node ID of the node that is equal to the maximum of all node IDs in the SPR.
TopoUniqueId	NUMBER(10)	NOT NULL	Unique number within the node.
NodeID	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit.
UniqueId	NUMBER(10)	NOT NULL	Unique number within the node.
LinkId	NUMBER(10)	NOT NULL	Unique number within the link.

1.2.91  L2Topology_Table

The L2Topology_Table (Table 1-90) contains information about the L2 topology.

Primary key: L2TOPOLOGY_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-90 L2Topology_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TopoNodeID	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit.
TopoUniqueID	NUMBER(10)	NOT NULL	Unique number within the node.
TopoType	NUMBER(2)	—	Topology types: 1: Point to point 2: SPR 3: Hub and spoke
Topology_Name	VARCHAR2(50)	—	CTM name for the topology.
TopoDescription	VARCHAR2(256)	—	Description of topology.
AlarmSeverity	NUMBER(2)	—	Alarm severity.
TopoStatus	NUMBER(2)	—	Status of the topology.
TopoSize	NUMBER(10)	—	Size of the topology.
TopoProtection	NUMBER(2)	—	Topology protection.
TopoResyncStatus	NUMBER(2)	—	Topology resynchronization states: 0: TOPO_SYNC_NEEDED 1: TOPO_SYNC_IN_PROGRESS 2: TOPO_SYNC_COMPLETED
TopoOperStatus	NUMBER(2)	—	Operational status of the topology.
BW_SP_Management	NUMBER(3)	—	Displays the bandwidth percentage used for the service provider (SP) management traffic class.
BW_Committed	NUMBER(3)	—	Displays the bandwidth percentage used for the Committed Information Rate (CIR) traffic class.
BW_Best_Effort	NUMBER(3)	—	Displays the bandwidth percentage used for the best-effort traffic class.
TOPOCONSTATE	NUMBER(2)	—	Displays CTM status after trying to synchronize the configuration of all the multilayer cards in the topology.
COS_COMMIT	NUMBER(3)	—	Committed class of service (CoS) value.
BW_Utilized	NUMBER(20)	—	Percentage of utilized bandwidth.
BW_Available	NUMBER(20)	—	Percentage of available bandwidth.
BW_AVVID_CONTROL	NUMBER(3)	—	Percentage of bandwidth for AVVID call control.
COS_SP_MANAGEMENT	VARCHAR2(128)	—	CoS for SP management.
COS_COMMITTED	VARCHAR2(128)	—	CoS for committed rate.
COS_AVVID_VOICEVID EO	VARCHAR2(128)	—	CoS for AVVID voice video.
COS_AVVID_CONTROL	VARCHAR2(128)	—	CoS for AVVID control.

1.2.92  L2_Vlan_Table

The L2_Vlan_Table (Table 1-91) contains information about the VLANs in an L2 Topology.

Primary key: VLAN_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-91 L2_Vlan_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TopoNodeID	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit where Point-to-Point topology is used. Where Shared Packet Ring (SPR) is used, it is the node ID of the node that is equal to the maximum of all node IDs in the SPR.
TopoUniqueId	NUMBER(10)	NOT NULL	Unique number within the node.
Vlan_Number	NUMBER(10)	NOT NULL	Unique number to identify the VLAN.
Service_Id	VARCHAR2(50)	—	CTM service ID.
Customer_Id	VARCHAR2(50)	—	CTM customer ID.
VlanStatus	NUMBER(2)	—	VLAN status.

1.2.93  Link_Table

The Link_Table (Table 1-92) contains information about the links on the CTM Network Map.

Primary key: LINK_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-92 Link_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
LinkID	NUMBER(8)	NOT NULL	Unique number created by the database.
LinkSrcNode	NUMBER(10)	NOT NULL	Source node.
LinkSrcModuleType	NUMBER(8)	NOT NULL	Module type at the source.
LinkSrcPhysicalLoc	NUMBER(20)	NOT NULL	Source node physical location.
LinkSrcIfIndex	NUMBER(10)	NOT NULL	Indicates whether there is a static index at the source. This is not applicable to the ONS 15327 or ONS 15454.
LinkSrcObjectType	NUMBER(10)	—	Type from object ID.
LinkDstNode	NUMBER(10)	NOT NULL	Source node (node Network Element DataBase ID [NEDBID].)
LinkDstModuleType	NUMBER(8)	NOT NULL	Module type at the source.
LinkDstPhysicalLoc	NUMBER(20)	NOT NULL	Source node physical location.
LinkDstModelType	NUMBER(4)	NOT NULL	Destination node physical location.
LinkDstIfIndex	NUMBER(10)	NOT NULL	Indicates whether there is a static index at the destination. This is not applicable to the ONS 15327 or ONS 15454.
LinkDstObjectType	NUMBER(10)	—	Object type from object ID.
LinkLayer	NUMBER(1)	NOT NULL	Type of link layer. Values are: 0: Link Layer Physical 1: Link Layer OTS 2: Link Layer OMS 3: Link Layer OCH 4: Link Layer SONET_SDH 5: Link Layer Layer2 6: Link Layer Invalid 7: Link Layer Layer3
LinkSize	NUMBER(2)	NOT NULL	Size of the link. Values are: 0: OC-3 1: OC-12 2: OC-48 3: OC-192 4: OC-768 5: DWDM 6: DWDM 1CH 7: DWDM 8CH 8: DWDM 16CH 9: DWDM 32CH 10: OTS 11: VT tunnel 12: 10BaseT 13:100BaseT 14: GIGE 15: Tunnel 16: Unknown 17: Not applicable 18: STM 1 19: STM 4 20: STM 16 21: STM 64 22: STM 256 23: OMS 24: 10 Gig ITU 25: 2_5 Gig ITU 26: Layer 2 27: 10 GIGE
LinkValid	NUMBER(1)	NOT NULL	Link validity. Values are: 0: Valid 1: Invalid
LegIndex	NUMBER(1)	DEFAULT 1	Link sequence number of the leg.
CableGroupId	NUMBER(8)	DEFAULT 0	Same for all legs of a link.
LinkProvType	NUMBER(1)	NOT NULL	Type of link provisioning. Values are: 0: Link autodiscovered 1: Link manual 2: Link virtual 2: Link unmanaged
LinkConnectionType	NUMBER(1)	NOT NULL DEFAULT 0	Connection type of the link. Values are: 0: Inter-NE 1: Intra-NE
LinkType	NUMBER(2)	NOT NULL	Type of link. Values are: 0: OC-N 1: VT tunnel 2: DWDM 3: CDL 4: PCA 5: Ethernet 6: POS 7: DPT 8: MPLS Tunnel 9: IPSEC Tunnel 10: Not applicable 11: Y-cable 12: LAP 13: Virtual
LinkProtType	NUMBER(2)	NOT NULL	Protection scheme of the link. Values are: 0: BLSR two fiber (2F) 1: 1+1 2: VT tunnel 3: Unprotected 4: BLSR four fiber (4F) 5: BLSR two fiber PCA 6: BLSR four fiber PCA 7: BLSR 8: Unprotected 9: PCA 10: Unknown 11: Not applicable 12: Partially protected 13: Y-cable
LinkProtRole	NUMBER(1)	NOT NULL	Protection role of the link. Values are: 0: Link protect 1: Link working 2: Link protection not applicable
LinkDirection	NUMBER(1)	NOT NULL	Direction of the link. Values are: 0: Bidirectional 1: Unidirectional
LinkState	NUMBER(1)	NOT NULL	State of the link. Values are: 0: Link state unknown 1: Link state up 2: Link state down
useForRouting	NUMBER(1)	DEFAULT 1 NOT NULL	Indicates whether the link should be used for routing. Values are: 0: False 1: True
LinkName	VARCHAR2(256)	NOT NULL	User-defined name of the link.
LinkDescription	VARCHAR2(256)	—	Any user-defined notes for the link.
NumCriticalAlarms	NUMBER(8)	DEFAULT 0	Number of critical alarms on the link.
NumMajorAlarms	NUMBER(8)	DEFAULT 0	Number of major alarms on the link.
NumMinorAlarms	NUMBER(8)	DEFAULT 0	Number of minor alarms on the link.
NumWarningAlarms	NUMBER(8)	DEFAULT 0	Number of warning alarms on the link.
LinkSrcPhyLocUnManaged	VARCHAR2(30)	DEFAULT NULL	Source physical location if unmanaged NE is a termination point.
LinkDestPhyLocUnmanaged	VARCHAR2(30)	DEFAULT NULL	Destination physical location if unmanaged NE is a termination point.
LinkUnmanaged	NUMBER(1)	DEFAULT 0	Indicates whether a link has at least one unmanaged NE. Values are: 0: False 1: True
LinkCost	NUMBER(10)	DEFAULT 1	Link weight.
LinkSrlgList	VARCHAR2(256)	DEFAULT NULL	User-defined SRL groups for the link.

1.2.94  Managed_Et_Table

The Managed_Et_Table (Table 1-93) contains information about the managed entity table.

Primary key: MANAGED_ET_TAB_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-93 Managed_Et_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
Mng_Entity_Type	NUMBER(5)	NOT NULL	Managed entity type. Valid values are: 1: Circuit termination point (CTP) 2: VLAN
Mng_Entity_Id_Num	NUMBER(10)	NOT NULL	Managed entity ID number.
Mng_Entity_Id2_Num	NUMBER(10)	NOT NULL	Managed entity ID 2 number.
NeDBAccessId	NUMBER(10)	NOT NULL	NE database ID.
FIELD1_Num	NUMBER(10)	NOT NULL	Polymorphic field module type.
FIELD2_Num	NUMBER(20)	NOT NULL	Polymorphic field physical location.
FIELD3_Num	NUMBER(10)	NOT NULL	Polymorphic field If index.
FIELD4_Num	NUMBER(10)	NOT NULL	Polymorphic field object index.
Customer_Id_Str	VARCHAR2(256)	—	Customer ID string representation.
Service_Id_Str	VARCHAR2(256)	—	Service ID string representation.

1.2.95  Map_Coordinate_Table

The Map_Coordinate_Table (Table 1-94) contains coordinates for nodes in the CTM Network Map as customized by the user.

Primary key: MAP_COORDINATE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-94 Map_Coordinate_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
CoOrdIndex	NUMBER(32)	NOT NULL	Unique number generated by the system.
ParentNodeType	NUMBER(1)	—	Type of parent node.
ParentNodeId	NUMBER(6)	—	Depending on the ParentNodeType, ParentNodeId is NEDBAccessId, GroupId, or SubnetId.
ChildNodeType	NUMBER(1)	—	Type of child node.
ChildNodeId	NUMBER(6)	—	Depending on the ChildNodeType, ChildNodeId is NEDBAccessId, GroupId, or SubnetId.
CoOrdX	NUMBER(8)	DEFAULT -1	X coordinate of the map.
CoOrdY	NUMBER(8)	DEFAULT -1	Y coordinate of the map.
UserID	NUMBER(4)	—	User ID.

1.2.96  Map_Cust_Table

The Map_Cust_Table (Table 1-95) contains information about maps as customized by the CTM user.

Primary key: MAP_CUST_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-95 Map_Cust_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
CustomizationID	NUMBER(8)	NOT NULL	Unique number created by the database.
MapCoordX	NUMBER(8)	DEFAULT -1	X coordinate for the mapping of the NE.
MapCoordY	NUMBER(8)	DEFAULT -1	Y coordinate for the mapping of the NE.
IconImageID	NUMBER(8)	DEFAULT -1	Index to the Map_Image_Table that represents the icon image for the NE.
BgIconImageID	NUMBER(8)	DEFAULT -1	Index to the Map_Image_Table that represents the background image for the NE.
UserID	NUMBER(4)	—	User ID that maps the User_Map_Table.
GrouporNEID	NUMBER(8)	—	Nedbaccessid of the NE_Info_Table.
TreeNodeType	NUMBER(1)	—	Node type in the User_Map_Table.
ZoomFactor	NUMBER (6,3)	DEFAULT 1	Zoom factor for the map background.
ViewPositionX	NUMBER(8)	DEFAULT 0	View port setting, x coordinate.
ViewPositionY	NUMBER(8)	DEFAULT 0	View port setting, y coordinate.
ShowLayerMode	NUMBER(1)	DEFAULT 0	Show all layers or not. Values are: 0: False 1: True
MapLayerRate	VARCHAR2(24)	DEFAULT "ALL LAYERS"	Show all layers or not. Values are: 0: False 1: True

1.2.97  Map_Image_Table

The Map_Image_Table (Table 1-96) contains information about the image files used for display in the CTM Network Map.

Primary key: MAP_IMAGE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-96 Map_Image_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
MapImageID	NUMBER(8)	NOT NULL	Unique number created by the database.
ImageName	VARCHAR2(256)	—	Name of the image.
ImageFile	BLOB	—	Actual binary image.

1.2.98  Map_Link_Table

The Map_Link_Table (Table 1-97) contains information about the links between nodes as displayed in the CTM Network Map.

Primary key: MAP_LINK_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-97 Map_Link_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
MapLinkID	NUMBER(8)	UNIQUE NOT NULL	Unique number created by the database.
Node1Type	NUMBER(1)	NOT NULL	Type of end 1 node. Values are: 1: Area 2: Group 3: NE 4: Subnetwork
Node1ID	NUMBER(8)	NOT NULL	Corresponds to -1, GroupID, NEDBAccessID, and SubnetworkID, respectively, depending on Node1Type.
Node2Type	NUMBER(1)	NOT NULL	Type of end 2 node. Values are: 1: Area 2: Group 3: NE 4: Subnetwork
Node2ID	NUMBER(8)	NOT NULL	Corresponds to -1, GroupID, NEDBAccessID, and SubnetworkID, respectively, depending on Node2Type.
LinkColor	NUMBER(8)	—	Color of the link. Value is determined by the client interface code.
LinkWidth	NUMBER(4)	—	Width of the link. Value is determined by the client interface code.
LinkName	VARCHAR2(32)	—	Name of the link.
LinkDescription	VARCHAR2(64)	—	Description of the link.
LinkToolTip	VARCHAR2(64)	—	User-specified name of the screen area for the link.

1.2.99  MIB2_Interface_Table

The MIB2_Interface_Table (Table 1-98) corresponds to the MIB2 table in IF-MIB.

Primary key: MIB2_INTERFACE_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-98 MIB2_Interface_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	Unique sequence number generated by the database.
NEDBAccessID	NUMBER(10)	NOT NULL	Refers to the NEDBAccessID in the NE_Info_Table.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
ModuleType	NUMBER(8)	DEFAULT 0	Module type.
NEIfIndex	NUMBER(20)	NOT NULL	Encoded value for name derivation.
ObjectType	NUMBER(10)	NOT NULL	Object type.
ModelType	NUMBER(5)	NOT NULL	Model type.
PhyIfIndex	NUMBER(10)	DEFAULT 0	Entity PhyIndex that realizes this interface.
IfIndex	NUMBER(10)	NOT NULL	ifindex in mib-2.
IfType	NUMBER(4)	NOT NULL	ifType as described in IF-MIB:ifTable MIB.
IfExtType	NUMBER(4)	DEFAULT 0	Extended type (if any).
IfSpecificType	NUMBER(4)	DEFAULT 0	Any device-specific type.
IfDescr	VARCHAR2(255)	NOT NULL	ifDescr as described in IF-MIB:ifTable MIB.
IfName	VARCHAR2(50)	NOT NULL	ifName as described in IF-MIB:ifTable MIB.
IfSpeed	VARCHAR2(15)	—	ifSpeed as described in IF-MIB:ifTable MIB.
IfAdminStatus	NUMBER(2)	NOT NULL	Administrative state of the interface. Values are: 1: Up 2: Down 3: Testing
IfOperStatus	NUMBER(2)	NOT NULL	Operational state of the interface. Values are: 1: Up 2: Down 3: Testing 4: Unknown 5: Dormant 6: Not present 7: Lower layer down
IfHighSpeed	VARCHAR2(15)	—	High speed that is capable on the interface, in 1,000,000 bits per second. The value is derived from the IF-MIB.

1.2.100  Model_Type_Table

The Model_Type_Table (Table 1-99) contains a list of NE models supported by CTM.

Primary key: MODEL_TYPE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-99 Model_Type_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModelType	NUMBER(4)	NOT NULL	Model type. Values are: 0: Unknown 1: Cisco ONS 15303 2: Cisco ONS 15304 3: Cisco ONS 15454 4: Cisco ONS 15800 5: Cisco ONS 15327 6: Cisco ONS 15801 7: Cisco ONS 15200 9: Cisco ONS 15540 10: Cisco ONS 15808 11: Cisco ONS 15540 XPS 12: Cisco ONS 15530 13: Cisco ONS 15501 14: Cisco ONS 15454 SDH 15: Cisco ONS 15216 EDFA2 16: Cisco ONS 15216 Optical Add/Drop Multiplexer (OADM) 17: Cisco ONS 15216 DWDM 18: Cisco ONS 15600 19: Cisco ONS 15216 OSC 20: Cisco ONS 15216 DCU 21: Cisco ONS 15302 22: Cisco ONS 15305 23: Cisco ONS 15216 UNIDIRFILTER 24: Unmanaged NE 25: Cisco ONS 15216 EDFA3 26: Cisco HFR 27: Cisco GSR IOX 28: Cisco 6509 29: Cisco ONS 15310 CL 30: Cisco ONS 15600 SDH 31: Cisco ONS 15216 EDFA1
ModelTypeName	VARCHAR2(64)	NOT NULL	Name of the model.

1.2.101  Module155xx_Community_String

The Module155xx_Community_String table (Table 1-100) contains the community strings for ONS 15501, ONS 15530, and ONS 15540 devices.

Primary key: MODULE155XX_TARGET_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-100 Module155xx_Community_String 

Column Name	Oracle Data Type	Integrity Constraints	Description
Target	VARCHAR2(64)	NOT NULL	Target IP address.
ReadString	VARCHAR2(64)	DEFAULT 'public'	Read community string.
Retry	NUMBER(2)	DEFAULT 1	Number of times to retry a connection.
Timeout	NUMBER(2)	DEFAULT 6	Time to wait before timing out a connection attempt.
WriteString	VARCHAR2(64)	NOT NULL	Write community string.

1.2.102  Module155xx_VTOID_Table

The Module155xx_VTOID_Table (Table 1-101) contains relating the module type to the vendor object ID.

Primary key: MODULE155XX_TYPE_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-101 Module155xx_VTOID_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModuleType	NUMBER(8)	NOT NULL	Module type.
VendorOID	VARCHAR2(64)	NOT NULL	Vendor object ID.

1.2.103  Module_Type_Mll_Info

The Module_Type_Mll_Info table (Table 1-102) defines the possible layer rates for each type of module.

Primary key: MLL_TYPE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-102 Module_Type_Mll_Info 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModuleType	NUMBER(8)	NOT NULL	Type of module, filled in at installation time.
LayerRate	NUMBER(1)	—	Link layers.
ModelType	NUMBER(4)	—	Type of model.

1.2.104  Module_Type_Table

The Module_Type_Table (Table 1-103) contains inventory information about the NE module types.

Primary key: MODULE_TYPE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-103 Module_Type_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModuleType	NUMBER(8)	NOT NULL	Type of module, filled in at installation time. Possible values are: 1: ISR A 2: ISR E 3: Cerent DS1 4: Cerent DS3 5: Cerent DS3XM 6: Cerent EC1 7: Cerent EPOS 100 8: Cerent EPOS 1000 9: Cerent OC3 10: Cerent OC12 11: Cerent OC48 60: Cerent OC192 86: Cerent STM64_64 87: Cerent STM16_16
ModuleName	VARCHAR2(64)	—	Name of the equipment.
ModelType	NUMBER(1)	—	Type of model.

1.2.105  NE_Audit_Trail_Table

The NE_Audit_Trail_Table (Table 1-104) shows ONS 15327 and ONS 15454 audit trail information.

Primary key: NE_AUDIT_TRAIL_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-104 NE_Audit_Trail_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE table.
SequenceNumber	NUMBER(6)	NOT NULL	Sequence number of the entry. Possible values are 1 to 59,999.
Timestamp	DATE	NOT NULL	Time stamp in Greenwich Mean Time (GMT).
OperationDescription	VARCHAR2(256)	NOT NULL	Server combines information obtained from multiple sources to create the description.
OperationStatus	VARCHAR2(1)	—	Operational status. Values are: P: Passed F: Failed X: Aborted
NEUserId	VARCHAR2(64)	—	CTC user ID.

1.2.106  NE_Info_Table

The NE_Info_Table (Table 1-105) contains information about all NEs managed by CTM.

Primary key: NE_INFO_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-105 NE_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	Unique sequence number generated by the database. NEDBAccessID is the link between the NE_Info_Table and other tables that contain NE information such as inventory, alarms, PM data, and so on.
NESysID	VARCHAR2(128)	NOT NULL	NE system ID.
NEIPAddr	NUMBER(10)	UNIQUE	NE IP address. The assumption is that the NE IP address is unique across the domains. The CTM GUI and server convert the IP address to a number before storing the address in the database.
NENSAPAddr	VARCHAR2(60)	UNIQUE	NE OSI network service access point (NSAP) address.
NEState	NUMBER(1)	NOT NULL	State of the NE. Values are: 1: In service 2: Out of service 3: Preprovisioned 4: Under maintenance
isNEConnected	NUMBER(1)	NOT NULL	Indicates whether the NE is reachable or unreachable from the CTM server. Values are: 1: Reachable 0: Unreachable
GNEID	NUMBER(4)	—	Index of the GNE in the GNE_Table that is used to route messages to the NE.
NEDescription	VARCHAR2(256)	—	Description of the NE.
NEConfigMode	NUMBER(2)	—	Configuration mode of the NE. Values are: 0: Back-to-Back Terminal 1: BLSR add/drop multiplexer (ADM) 2: Hybrid 3: Line Extender Module 4: MS-SPRing ADM 5: Optical ADM 6: Optical Line Amplifier 7: Subnetwork connection protection (SNCP) ring ADM 8: Terminal 9: UPSR ADM 10: Other 11: Unknown 12: East Terminal 13: West Terminal 14: Not applicable 15: FULL-BLUE-OADM 16: FULL-RED-OADM 17: FULL-RED-BLUE-OADM 18: Extended Long Haul (ELH) West Terminal 19: ELH East Terminal 20: ELH Optical Line Amplifier 21: ELH Line Extender Module 22: ELH Optical ADM 23: ELH Terminal 25: ONS 15216 200-GHz OADM1 26: ONS 15216 200-GHz OADM2 27: ONS 15216 100-GHz OADM1 28: ONS 15216 100-GHz OADM2 29: ONS 15216 100-GHz OADM4 30: ONS 15216 EDFA1 31: ONS 15216 EDFA2 32: ONS 15216 Red 200-GHz DWDM Filter 33: ONS 15216 Blue 200-GHz DWDM Filter
NEConfigMode (Continued)	NUMBER(2)	—	34: ONS 15216 Red 100-GHz DWDM Filter 35: ONS 15216 Blue 100-GHz DWDM Filter 36: DCS 37: Linear ADM 38: Regeneration opt ADM 39: ELH Regeneration opt ADM 40: ONS 15216 OSC 1510 nm 41: ONS 15216 DCU 44: ONS 15216 UNIDIRFILTER 45: Unmanaged NE 46: Line 47: Hub 48: ONS 15216 EDFA3 49: Terminal Hub East 50: Terminal Hub West 51: Terminal OADM East 52: Terminal OADM West 53: Active TDM Hybrid Site 54: Active Line Site 55: Passive Line Site 56: DWDM Hub Node 57: Amplified OADM 58: Passive OADM 59: Line Amplifier 60: DWDM Terminal 61: OSC Regeneration Site 62: hfr 63: hsr 64: miniq 65: gsriox 66: FULLQ 67: HALFQ 68: CAT6509 69: ROADM
NESnmpCommString	VARCHAR2(64)	—	NE Simple Network Management Protocol (SNMP) community string.
NECLLICode	VARCHAR2(64)	—	NE Common Language Equipment Identification (CLEI) code.
NEStateChangeTime	DATE	—	Time stamp of last NE state change.
NEModelType	NUMBER(4)	DEFAULT 1	Type of NE.
NEModelIndex	NUMBER(4)	DEFAULT 0	Index of the appropriate database record for the version. The value 0 represents an unknown model index.
NEModelStatus	NUMBER(4)	DEFAULT 0	Operational state of the NE model index. This is the server status view of the index. The NEModelStatus variable should not be set by the client. Values are: 0: Unknown model (probably being fetched) 1: Valid model 2: Mismatched model (NE type does not match) 3: Unknown model type 4: Unknown model software version
NESubNetworkID	NUMBER(8)	DEFAULT 0	Reference to the subnetwork in which this NE belongs.
NETimeOffset	NUMBER(10)	DEFAULT 0	Time offset between UNIX and the NE.
NELEDStatus	RAW(8)	DEFAULT '0000000000000000'	Reflects all LEDs on the NE front panel.
NESystemTitle	VARCHAR2(64)	DEFAULT NULL	Title for this NE.
NEUserLabel	VARCHAR2(64)	DEFAULT NULL	Name of the user of this NE.
NEVendorName	VARCHAR2(32)	DEFAULT NULL	NE vendor name.
NEVersion	VARCHAR2(128)	DEFAULT NULL	Version string for the NE.
NENumActiveCriticalErrors	NUMBER(8)	DEFAULT 0	Current number of active critical errors for the NE.
NENumActiveMajorErrors	NUMBER(8)	DEFAULT 0	Current number of active major errors for the NE.
NENumActiveMinorErrors	NUMBER(8)	DEFAULT 0	Current number of active minor errors for the NE.
NEPmEnabled	NUMBER(1)	DEFAULT 1	Indicates whether PM data collection is enabled or disabled for PM data other than Robust PM. Values are: 0: PM collection is disabled 1: PM collection is enabled 2: 15-minute PM collection is enabled 3: 1-day PM collection is enabled
NENodeID	NUMBER(10)	—	Used to specify an ONS 15327 or ONS 15454 NE from other NEs.
NEInventoryLastChanged	NUMBER(20)	—	Used to specify the last time an ONS 15327 or ONS 15454 NE changed its inventory.
NESubnetMask	NUMBER(10)	—	Subnet mask.
NEDefaultGateway	NUMBER(10)	—	Default gateway.
NENumUnActiveCriticalErrors	NUMBER(8)	DEFAULT 0	Current number of inactive critical errors for the NE.
NENumUnActiveMajorErrors	NUMBER(8)	DEFAULT 0	Current number of inactive major errors for the NE.
NENumUnActiveMinorErrors	NUMBER(8)	DEFAULT 0	Current number of inactive minor errors for the NE.
NENumCleared	NUMBER(8)	DEFAULT 0	Current number of cleared errors for the NE.
DisplayModelName	VARCHAR2(15)	—	Display string for the NE.
GWTL1USERNAME	VARCHAR2(20)	DEFAULT NULL	Default TL1 username.
GWTL1PASSWD	VARCHAR2(20)	DEFAULT NULL	Default TL1 password.
ServiceID	NUMBER(20)	DEFAULT 0	Which instances of NE and PM service are currently managing this NE.
DeleteState	NUMBER(1)	DEFAULT 0	State of deletion. Values are: 0: Working 1: Deleted 2: Purge in progress 3: Purge failed
ConfigSyncStatus	NUMBER(1)	DEFAULT 0	Configuration resynchronization status. Values are: 0: Initial 1: Queued 2: In Progress 3: Successful
NEUSERNAME	VARCHAR2(64)	DEFAULT NULL	Default NE username.
NEUSERPASSWORD	VARCHAR2 (64)	DEFAULT NULL	Default NE password.
NEDiscoveryState	NUMBER(1)	NOT NULL	State of the NE under discovery. Values are: 1: NE undiscovered 2: NE initializing 3: NE synch configuration 4: NE discovered
NERobustPmEnabled	NUMBER(1)	DEFAULT 0	Indicates whether Robust PM data collection is enabled or disabled. Values are: 0: Robust PM data collection is disabled. 1: Robust PM data collection is enabled. 2: 15-minute Robust PM data collection is enabled. 3: 1-day Robust PM data collection is enabled.
SecurityTicket	VARCHAR2(32)	DEFAULT NULL	Default ticket.
RobustPMEnableTime	DATE	—	Time stamp of 15-minute Robust PM data collection is enabled.
DebugLevel	NUMBER(1)	DEFAULT -1	Debug level for the NE. Values are: -1: Service 0: Fatal 1: Major 2: Minor 3: Info 4: Debug 5: Trace
Robust1DayPMEnableTime	DATE	—	Time stamp of 1-day Robust PM data collection is enabled.
SecondsBehindUTC	NUMBER(20)	DEFAULT 0	Offset—Number of seconds behind Coordinated Universal Time (UTC).
SecondsDstBehindUTC	NUMBER(20)	DEFAULT 0	Offset—Number of seconds Daylight Saving Time (DST) is behind UTC.

1.2.107  NE_Inventory_Table

The NE_Inventory_Table (Table 1-106) contains inventory information about each NE managed by CTM.

Primary key: NE_INVENTORY_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-106 NE_Inventory_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE Table.
ModuleIndex	NUMBER(4)	NOT NULL	Unique integer that identifies a subcomponent in a chassis; same as ifStaticIndex in the Interface_Table.
ModuleName	VARCHAR2(32)	—	Name of the module on the NE whose inventory information is stored in this row.
ModulePartNum	VARCHAR2(32)	—	Module part number.
ModuleCLEICode	VARCHAR2(32)	—	Module CLEI code.
ModuleHWVersion	VARCHAR2(32)	—	Module hardware version.
ModuleSWVersion	VARCHAR2(32)	—	Module software version.
ModuleSerialNumber	VARCHAR2(32)	—	Module serial number.
ModuleDATEOfManuf	DATE	—	Module date of manufacture.
ModuleDateOfEntry	DATE	—	Time stamp when this entry was made.
ModuleHoursInUse	NUMBER(10)	—	Number of hours the module was in use when the entry was made. Current hours in use = (Current Time - ModuleDateOfEntry) + ModuleHoursInUse.

1.2.108  NE_Model_State_Table

This table is not in use in CTM R5.0.

1.2.109  NE_Model_Type_Table

This table is not in use in CTM R5.0.

1.2.110  NE_Port_Status_Table

The NE_Port_Status_Table (Table 1-107) contains information about the tagged status of all ports on an NE.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-107 NE_Port_Status_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NEDBAccessID of the NE for which the port status information is stored; same as NEDBAccessID in the NE_Info_Table.
PortIndex	NUMBER(4)	NOT NULL	Static index of the port.
PortOperState	NUMBER(2)	NOT NULL	State of the port. Values are: 1: Preprovisioned 2: Under maintenance 3: In service 4: Out of service

1.2.111  NE_Swimage_Table

The NE_Swimage_Table (Table 1-108) stores information about the active and standby software images on the NE.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-108 NE_Swimage_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(10)	—	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ACTIVEIMAGENAME	VARCHAR2(64)	—	Active image name.
STANDBYIMAGENAME	VARCHAR2(64)	—	Standby image name.
DEFAULTIMAGENAME	VARCHAR2(64)	—	Default image name.
INPROGRESS	NUMBER(1)	DEFAULT 0	Indicates whether there is an activate or revert procedure in progress. Values are: 0: False 1: True

1.2.112  Network_Partition_Table

The Network_Partition_Table (Table 1-110) stores network partition information.

Primary key: NETWORK_PARTITION_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-109 Network_Partition_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NPId	NUMBER(10)	—	Network partition ID.
NPName	VARCHAR2(128)	UNIQUE, NOT NULL	String name of the network partition.
NPDescription	VARCHAR2(256)	—	Description of the network partition.

1.2.113  ObjectAttributeTable

The ObjectAttributeTable (Table 1-110) stores metadata attribute information for all attributes of objects in the ObjectTypeTable.

Primary key: OBJECTATTRIBUTETABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-110 ObjectAttributeTable 

Column Name	Oracle Data Type	Integrity Constraints	Description
METADATAINDEX	NUMBER(5)	NOT NULL	Metadata index of the object.
ATTRINDEX	NUMBER(5)	—	Index of the attribute.
PARENTINDEX	NUMBER(5)	—	Index of the parent attribute.
COLID	NUMBER(4)	NOT NULL	Column ID used to store the attribute value in the EQPT_Info_Table.
NAME	VARCHAR2(64)	—	Name of the attribute.
DISPLAYTEXT	VARCHAR2(256)	—	Display name of the attribute on CTM UI client.
ATTRCLASS	NUMBER(4)	—	Attribute class. Values are: 1: Equipment 2: Analog input/output 3: Digital input/output 4: Threshold 5: Severity 6: Action 7: WRKP 8: Real time
ATTRTYPE	NUMBER(4)	—	Attribute type. Values are: 1: Integer 2: Float 3: Enum 4: Boolean 5: String 6: Exponential 7: Float string 10: Group SONET PM Threshold 11: Group DWDM PM Threshold
EXPBASE	NUMBER(10)	—	Base of the exponential for exponential attributes.
EXPONENT	NUMBER(10)	—	Exponent of the exponential for exponential attributes.
FACTORYDEFAULT	VARCHAR2(32)	—	Factory default value.
CUSTOMERDEFAULT	VARCHAR2(32)	—	Customer default value.
MINVAL	VARCHAR2(32)	—	Minimum allowable value for the attribute.
MAXVAL	VARCHAR2(32)	—	Maximum allowable value for the attribute.
ENUMVAL	VARCHAR2(1024)	—	ENUM values for the attribute.
INCRVAL	NUMBER(7,3)	—	Increments allowed for the attribute.
UNIT	VARCHAR2(60)	—	Unit of the attribute.
ATTRACCESS	NUMBER(3)	—	Type of access. Values are: 1: Read-write 2: Read-only 3: Read-create
MANDATORY	NUMBER(1)	—	Indicates whether the attribute is mandatory. Values are: 0: Not mandatory 1: Mandatory
ATTRGROUP	NUMBER(2)	—	Type of group. Values are: 1: Temperature 2: Current 3: Power 4: Input power 5: Output power 6: Analog 7: Digital 8: Info 9: Action 10: Current value 11: Extra pump (EP) power 12: Analog battery management module (BAT) 13: Analog data communications channel (DCC) 14: Analog fan 15: Digital in 16: Digital out 17: Config 18: Optical power 19: Performance 20: Quality of service (QoS) 21: Security 22: Insertion 23: Attenuation 24: Pump power 25: Collision 26: Widget action
MAXLEN	NUMBER(10)	—	Maximum length of attribute.
ATTRGROUP	NUMBER(2)	—	Values are: 1: Temperature 2: Current 3: Power 4: Input power 5: Output power 6: Analog 7: Digital 8: Info 9: Action 10: Current value 11: EP power 12: Analog BAT 13: Analog DCC 14: Analog fan 15: Digital in 16: Digital out 17: Config 18: Optical power 19: Performance 20: QoS 21: Security 22: Insertion 23: Attenuation 24: Pump power 25: Collision
MAXLEN	NUMBER(10)	—	Maximum length of an attribute string.

1.2.114  Object_Relationship_Table

The Object_Relationship_Table (Table 1-111) contains information about CTM object relationships.

Primary key: OBJECT_RELATIONSHIP_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-111 Object_Relationship_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
MODELTYPE	NUMBER(4)	NOT NULL	Model type.
RELATIONSHIPTYPE	NUMBER(1)	NOT NULL	Relationship type. Valid values are: 0: Self 1: Association 2: Parent
SELFOBJECTINDEX	NUMBER(10)	NOT NULL	—
RELATEDOBJECTINDEX	NUMBER(10)	NOT NULL	—

1.2.115  ObjectTypeTable

The ObjectTypeTable (Table 1-112) stores metadata information for the various object types that CTM manages.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-112 ObjectTypeTable 

Column Name	Oracle Data Type	Integrity Constraints	Description
MODELTYPE	NUMBER(4)	NOT NULL	Model type.
OBJECTINDEX	NUMBER(10)	NOT NULL	Metadata object index.
METADATAINDEX	NUMBER(5)	—	Index in the ObjectAttributeTable.
OBJSHORTNAME	VARCHAR2(32)	NOT NULL	Short name for the object.
OBJLONGNAME	VARCHAR2(128)	—	Long name for the object.
PARENTINDEX	NUMBER(5)	—	Index of the parent object.
BOARDNAME	VARCHAR2(32)	—	Name of the object (module).

1.2.116  ONS15216_Active_User_Table

Primary key: ONS15216_ACTIVE_USER_TABLE_PK

Tablespace: ONS152xx_DATA_TABLESPACE

Table 1-113 ONS15216_Active_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
UserID	VARCHAR2(64)	NOT NULL	ONS 15216 username.

1.2.117  ONS15216_NE_Inventory_Table

The ONS15216_NE_Inventory_Table (Table 1-114) stores ONS 15216 inventory information.

Primary key: ONS15216_NE_INVENTORY_PK

Tablespace: ONS152XX_DATA_TABLESPACE

Table 1-114 ONS15216_NE_Inventory_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
Cleicode	VARCHAR2(32)	—	CLEI code for the card.
PartNumber	VARCHAR2(32)	—	Part number of the module.
SerialNumber	VARCHAR2(32)	—	Serial number of the module.
FWVersion	VARCHAR2(32)	—	Firmware version.
FWUpdateDate	VARCHAR2(32)	—	Date of firmware update.
WaveLength	VARCHAR2(64)	—	Wavelength.
ModuleNumber	NUMBER(2)	—	Module number.
MacAddress	VARCHAR2 (17)	—	MAC address of the module.

1.2.118  ONS15216_Privilege_Table

The ONS15216_Privilege_Table (Table 1-115) contains information on privilege levels allowed for the ONS 15216 NE.

Primary key: PK_ONS15216_PRIV_ID

Tablespace: ONS152xx_DATA_TABLESPACE

Table 1-115 ONS15216_Privilege_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
PrivilegeID	NUMBER(10)	NOT NULL	ID to access this table.
Privilege	VARCHAR2(30)	NOT NULL	Privilege level.
Description	VARCHAR(64)	—	Description.

1.2.119  ONS15216_User_Table

The ONS15216_User_Table (Table 1-116) contains information about ONS 15216 users.

Primary key: ONS15216_USER_TABLE_PK

Tablespace: ONS152xx_DATA_TABLESPACE

Table 1-116 ONS15216_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access an NE in this table.
UserID	VARCHAR2(64)	NOT NULL	ONS 15216 username.
Password	VARCHAR2(64)	—	ONS 15216 password.
PrivilegeID	NUMBER(10)	—	Privilege level.
LastLoginTime	DATE	—	Time stamp of the last login.
Timeout	NUMBER(3)	DEFAULT 0	Change password on next login status.

1.2.120  ONS1530x_HO_PM_Table

The ONS1530x_HO_PM_Table (Table 1-117) contains information about the ONS 1530x high-order PM parameters.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS1530x_HO_PM_PK

Tablespace: ONS153xx_DATA_TABLESPACE

Table 1-117 ONS1530x_HO_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
ModuleType	NUMBER(8)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
NEIFINDEX	NUMBER(20)	NOT NULL	—
TimeStamp	DATE	NOT NULL	—
NEBBE	VARCHAR2(40)	—	Background block error.
NEES	VARCHAR2(40)	—	Errored seconds.
NESES	VARCHAR2(40)	—	Severely errored seconds.
NEUAS	VARCHAR2(40)	—	Unavailable seconds.
FEBBE	VARCHAR2(40)	—	Background block error (far end).
FEES	VARCHAR2(40)	—	Errored seconds (far end).
FESES	VARCHAR2(40)	—	Severely errored seconds (far end).
FEUAS	VARCHAR2(40)	—	Unavailable seconds (far end).
OBJECTTYPE	NUMBER(10)	—	Object type.
STROBJINSTANCE	VARCHAR2(256)	—	—
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.121  ONS1530x_IP_PM_Table

The ONS1530x_IP_PM_Table (Table 1-118) contains information about the ONS1530x IP PM table.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS1530x_IP_PM_PK

Tablespace: ONS153xx_DATA_TABLESPACE

Table 1-118 ONS1530x_IP_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access the ONS1530x_NE_Inventory_Table; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(8)	—	Module type.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location of the card.
NEIFINDEX	NUMBER(20)	NOT NULL	—
TimeStamp	DATE	NOT NULL	Date and time when statistics were stored.
IFINUCASTPKTS	VARCHAR2(40)	—	—
IFINDISCARDS	VARCHAR2(40)	—	—
IFINERRORS	VARCHAR2(40)	—	—
IFINOCTETS	VARCHAR2(40)	—	—
IFOUTOCTETS	VARCHAR2(40)	—	—
IFINNUCASTPKTS	VARCHAR2(40)	—	—
IFINUNKNOWNPROTOS	VARCHAR2(40)	—	—
IFOUTUCASTPKTS	VARCHAR2(40)	—	—
IFOUTNUCASTPKTS	VARCHAR2(40)	—	—
IFOUTDISCARDS	VARCHAR2(40)	—	—
IFOUTERRORS	VARCHAR2(40)	—	—
IFINMULTICASTPKTS	VARCHAR2(40)	—	—
IFINBROADCASTPKTS	VARCHAR2(40)	—	—
IFOUTMULTICASTPKTS	VARCHAR2(40)	—	—
IFOUTBROADCASTPKTS	VARCHAR2(40)	—	—
IFTYPE	NUMBER(1)	NOT NULL	—
OBJECTTYPE	NUMBER(10)	NOT NULL	Object type.
STROBJINSTANCE	VARCHAR2(256)	—	—
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.122  ONS1530x_LO_PM_Table

The ONS1530x_LO_PM_Table (Table 1-119) contains information about the ONS 1530x low-order PM parameters.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS1530x_LO_PM_PK

Tablespace: ONS153xx_DATA_TABLESPACE

Table 1-119 ONS1530x_LO_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
ModuleType	NUMBER(8)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
NEIFINDEX	NUMBER(20)	NOT NULL	—
TimeStamp	DATE	NOT NULL	—
NEBBE	VARCHAR2(40)	—	Background block error.
NEES	VARCHAR2(40)	—	Errored seconds.
NESES	VARCHAR2(40)	—	Severely errored seconds.
NEUAS	VARCHAR2(40)	—	Unavailable seconds.
FEBBE	VARCHAR2(40)	—	Background block error (far end).
FEES	VARCHAR2(40)	—	Errored seconds (far end).
FESES	VARCHAR2(40)	—	Severely errored seconds (far end).
FEUAS	VARCHAR2(40)	—	Unavailable seconds (far end).
OBJECTTYPE	NUMBER(10)	—	Object type.
STROBJINSTANCE	VARCHAR2(256)	—	—
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.123  ONS1530x_MS_PM_Table

The ONS1530x_MS_PM_Table (Table 1-120) contains information about the ONS 1530x multiplex section PM parameters.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS1530x_MS_PM_PK

Tablespace: ONS153xx_DATA_TABLESPACE

Table 1-120 ONS1530x_MS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
ModuleType	NUMBER(8)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
NEIFINDEX	NUMBER(20)	NOT NULL	—
TimeStamp	DATE	NOT NULL	—
NEBBE	VARCHAR2(40)	—	Background block error.
NEES	VARCHAR2(40)	—	Errored seconds.
NESES	VARCHAR2(40)	—	Severely errored seconds.
NEUAS	VARCHAR2(40)	—	Unavailable seconds.
FEBBE	VARCHAR2(40)	—	Background block error (far end).
FEES	VARCHAR2(40)	—	Errored seconds (far end).
FESES	VARCHAR2(40)	—	Severely errored seconds (far end).
FEUAS	VARCHAR2(40)	—	Unavailable seconds (far end).
OBJECTTYPE	NUMBER(10)	—	Object type.
STROBJINSTANCE	VARCHAR2(256)	—	—
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.124  ONS1530x_NE_Inventory_Table

The ONS1530x_NE_Inventory_Table (Table 1-121) contains information about the ONS 1530x equipment inventory table.

Primary key: ONS1530x_NE_INVENTORY_TABLE_PK

Tablespace: ONS153xx_DATA_TABLESPACE

Table 1-121 ONS1530x_NE_Inventory_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access the ONS1530x_NE_Inventory_Table; same as NEDBAccessID in the NE_Info_Table.
Type	NUMBER(10)	—	Equipment type.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location of the card.
ModuleName	NUMBER(10)	—	Equipment name.
ServiceState	VARCHAR2(40)	—	State of the module. Values are: 0: In Service 1: Out of Service 2: Out of Service By Maintenance 3: Service NA 4: Out of Service Pending
SoftwareVersion	VARCHAR2(16)	—	Software version of the module.
SerialNumber	VARCHAR2(16)	—	Serial number of the module.
HardwareVersion	VARCHAR2(16)	—	Hardware version of the module.
InstallState	VARCHAR2(40)	—	State of the slot. Values are: 0: Empty 1: Installed and Expected 2: Expected and Not Installed 3: Installed and Not Expected 4: Mismatch of Installed and Expected 5: Unavailable 6: Unknown
ExpectedModule	NUMBER(10)	—	Expected module in the slot.

1.2.125  ONS1530x_RS_PM_Table

The ONS1530x_RS_PM_Table (Table 1-122) contains information about the ONS 1530x regeneration section PM parameters.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS1530x_RS_PM_PK

Tablespace: ONS153xx_DATA_TABLESPACE

Table 1-122 ONS1530x_RS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
ModuleType	NUMBER(8)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
NEIFINDEX	NUMBER(20)	NOT NULL	—
TimeStamp	DATE	NOT NULL	—
NEBBE	VARCHAR2(40)	—	Background block error.
NEES	VARCHAR2(40)	—	Errored seconds.
NESES	VARCHAR2(40)	—	Severely errored seconds.
NEUAS	VARCHAR2(40)	—	Unavailable seconds.
OBJECTTYPE	NUMBER(10)	—	Object type.
STROBJINSTANCE	VARCHAR2(256)	—	—
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.126  ONS15454_327_NE_Table

The ONS15454_327_NE_Table (Table 1-123) shows audit configuration information for the ONS 15327 and ONS 15454 SONET.

Primary key: ONS15454_327_NE_Table_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-123 ONS15454_327_NE_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE table.
NEAuditTrailStatus	NUMBER(1)	DEFAULT 0	Indicates whether the audit trail is enabled. Values are: 0: Disabled 1: Enabled
NEAuditTrailLastSequenceNumber	NUMBER(8)	DEFAULT 0	Maximum sequence number for which audit trail information has already been collected.
NELastAuditTrailCollectedTime	DATE	DEFAULT NULL	Last time the audit trail was collected.
NEDwdmConfigMode	NUMBER(2)	DEFAULT -1	Stores DWDM NE types. A list of possible DWDM NE types can also be found in the NEConfigMode column in the NE_INFO_TABLE.
Last15MinPMCollectedTime	DATE	DEFAULT NULL	The last time when the 15-minute PM data was collected.
Last1DayPMCollectedTime	DATE	DEFAULT NULL	The last time when the 1-day PM data was collected.

1.2.127  ONS15454_8B10B_PM_Table

This table (Table 1-124) is used for fiber channel transport PM data accumulated on the FC_MR-4 card.

Primary key: ONS15454_8B10B_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-124 ONS15454_8B10B_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit mask value
inMaintenance	NUMBER(1)	—	Indicates whether the NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold values for the PM bucket for the 15-minute interval.
ThresholdList	VARCHAR2(1024)	—	Threshold value for the PM bucket for the day.
validPackets	NUMBER(20)	DEFAULT -1	8b10b valid packets.
invalidPackets	NUMBER(20)	DEFAULT -1	8b10b invalid packets.
codeGroupViolations	NUMBER(20)	DEFAULT -1	8b10b code group violations.
idleOrderedSets	NUMBER(20)	DEFAULT -1	8b10b idle ordered sets.
nonIdleOrderedSets	NUMBER(20)	DEFAULT -1	8b10b nonidle ordered sets.
dataCodeGroups	NUMBER(20)	DEFAULT -1	8b10b data code groups.
rxTotalPackets	NUMBER(20)	DEFAULT -1	8b10b total packets received.
ifInErrors	NUMBER(20)	DEFAULT -1	8b10b errors in received packets.
statsEncodingDispErrors	NUMBER(20)	DEFAULT -1	8b10b encoding errors.
dataOrderedSets	NUMBER(20)	DEFAULT -1	8b10b data ordered sets.
dataPayLoad	VARCHAR2(1024)	—	8b10 data payload.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.128  ONS15454_Active_User_Table

The ONS15454_Active_User_Table (Table 1-125) contains information about the ONS 15454 SONET and ONS 15454 SDH Active Users Table.

Primary key: ONS15454_ACTIVE_USER_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-125 ONS15454_Active_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE.
UserID	VARCHAR2(64)	NOT NULL	Cisco ONS 15454 username.
ClientIp	VARCHAR2(64)	NOT NULL	Client IP address.

1.2.129  ONS15454_CBQoS_Info_Table

Primary key: ONS15454_CBQOS_INFO_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-126 ONS15454_CBQoS_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE table.
PhysicalLoc	NUMBER(10)	NOT NULL	Physical location of the card.
ModuleType	NUMBER(8)	—	Card type.
CbQosPolicyindex	NUMBER(10)	NOT NULL	—
CbQosObjectIndex	NUMBER(10)	NOT NULL	—
CbQosConfigIndex	NUMBER(10)	NOT NULL	—
CbQosObjectType	NUMBER(2)	—	Valid values are: 1: Policymap 2: Classmap 3: MatchStatement 4: Queueing 5: RandomDetect 6: TrafficShaping 7: Police 8: Set
CbQosParentindex	NUMBER(10)	NOT NULL	—
ObjectName	VARCHAR2(4000)	—	Name of the object.
DisplayString	VARCHAR2(4000)	—	Complete name of the object.
StatsEnabled	NUMBER(1)	DEFAULT 0	Valid values are: 0: False 1: True

1.2.130  ONS15454_CLASSMAP_PM_Table

This table is used for CBQOS PM data where the module type is an ML-series card.

Primary key: ONS15454_QOSCM_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-127 ONS15454_CLASSMAP_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Indicates status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask value
inMaintenance	NUMBER(1)	—	Indicates whether NE was In Maintenance state when the PM bucket was collected.
CBQosCMPrePolicyPk t64	NUMBER(20)	DEFAULT 0	—
CBQosCMPrePolicyBy te64	NUMBER(20)	DEFAULT 0	—
CBQosCMPostPolicyB yte64	NUMBER(20)	DEFAULT 0	—
CBQosCMDropPkt64	NUMBER(20)	DEFAULT 0	—
CBQosCMDropByte64	NUMBER(20)	DEFAULT 0	—
CBQosCMNoBufDropPk t64	NUMBER(20)	DEFAULT 0	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.131  ONS15454_CMS_Storage_Table

The ONS15454_CMS_Storage_Table (Table 1-128) stores information about the CTC binary. The table can have multiple entries; each entry indicates a different CTC package that was manually uploaded by the user. At any one time, only one of the packages can be active. The active package is used by the CTM client to launch CTC. The Preferred-jar-path value in the CTM_Config_Table points to the entry in the ONS15454_CMS_Storage_Table that is active at that time.

Primary key: ONS15454_CMS_STORAGE_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-128 ONS15454_CMS_Storage_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
JarID	NUMBER(4)	NOT NULL	Running number that is incremented by one for each insertion into the table.
FileName	VARCHAR2(128)	NOT NULL	Used to store the system recommended JAR file version number.
JarTime	DATE	NOT NULL	Date of the JAR.
UserName	VARCHAR2(128)	NOT NULL	User profile when JAR file is active.

1.2.132  ONS15454_COS_PM_Table

The ONS15454_COS_PM_Table (Table 1-129) contains historical PM data collected in each interface and class of service level for the ML-series cards of CTC-based NEs.

Primary key: ONS15454_COS_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-129 ONS15454_COS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Indicates status of the PM bucket. Valid values are: 0: Valid period Other: Bit mask value
inMaintenance	NUMBER(1)	—	Indicates whether the NE was In Maintenance state when the PM bucket was collected.
InterfaceName	VARCHAR2(40)	NOT NULL	—
InterfaceDirection	VARCHAR2(40)	NOT NULL	—
ClassOfServiceLevel	NUMBER(1)	NOT NULL	—
PostPolicyPackets	NUMBER(20)	DEFAULT -1	—
PostPolicyBytes	NUMBER(20)	DEFAULT -1	—
DropPackets	NUMBER(20)	DEFAULT -1	—
DropBytes	NUMBER(20)	DEFAULT -1	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.133  ONS15454_DS1_PM_Table

The ONS15454_DS1_PM_Table (Table 1-130) stores DS-1 PM information for ONS 15327 and ONS 15454 NEs. This table is used when the module type is a DS1, DS1N, or DS3XM.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_DS1_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-130 ONS15454_DS1_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
DS1LineCodeViolations	NUMBER(10)	DEFAULT -1	Number of line code violations (LCVs) encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1LineErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1LineSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1RxPathAIS	NUMBER(10)	DEFAULT -1	Number of alarm indication signal seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS3XM card and the DS1 line card.
DS1RxPathErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS3XM card and the DS1 line card.
DS1RxPathSAS	NUMBER(10)	DEFAULT -1	Number of severely alarmed seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS3XM card and the DS1 line card.
DS1RxPathSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS3XM card and the DS1 line card.
DS1RxPathUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS3XM card and the DS1 line card.
DS1RxPathCodeViolations	NUMBER(10)	DEFAULT -1	Number of LCVs encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS3XM card and the DS1 line card.
DS1TxPathAIS	NUMBER(10)	DEFAULT -1	Number of alarm indication signal seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1TxPathErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1TxPathSAS	NUMBER(10)	DEFAULT -1	Number of severely alarmed seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1TxPathSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1TxPathUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1TxPathCodeViolations	NUMBER(10)	DEFAULT -1	Number of line code violations encountered by a DS1 interface in the interval. This field is valid for the DS1 interface on the DS1 line card only.
DS1LineLOSS	NUMBER(10)	DEFAULT -1	Loss of signal seconds line. Count of 1-second intervals containing one or more LOS defects.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeDS1Fd1PathCV	NUMBER(10)	DEFAULT -1	Number of far-end path CV (ESF).
FeDS1Fd1PathES	NUMBER(10)	DEFAULT -1	Number of far-end path ES (ESF).
FeDS1Fd1PathESA	NUMBER(10)	DEFAULT -1	Number of far-end path ES-Type A(ESF).
FeDS1Fd1PathESB	NUMBER(10)	DEFAULT -1	Number of far-end path ES-Type B (ESF).
FeDS1Fd1PathSES	NUMBER(10)	DEFAULT -1	Number of far-end path SES (ESF).
FeDS1Fd1PathSEFS	NUMBER(10)	DEFAULT -1	Number of far-end path SEFS (ESF).
FeDS1Fd1PathCSS	NUMBER(10)	DEFAULT -1	Number of far-end path Controlled Slip Seconds (ESF).
FeDS1Fd1PathUAS	NUMBER(10)	DEFAULT -1	Number of far-end path UAS (ESF).
FeDS1Fd1PathFC	NUMBER(10)	DEFAULT -1	Number of far-end path FC (ESF).
FeDS1Fd1LineES	NUMBER(10)	DEFAULT -1	Number of far-end line ES (ESF).
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.134  ONS15454_DS3_PM_Table

The ONS15454_DS3_PM_Table (Table 1-131) stores DS-3 PM information for ONS 15327 and ONS 15454 NEs. This table is used for DS3 PM data where the module type is a DS3, DS3E, DS3N, DS3NE, or DS3XM line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_DS3_LINE_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-131 ONS15454_DS3_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	DEFAULT 0	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
DS3LineCodeViolations	NUMBER(10)	DEFAULT -1	Number of LCVs encountered by a DS3 interface in the interval. This is valid for the DS3XM and DS3 line cards.
DS3LineErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a DS3 interface in the interval. This is valid for the DS3XM and DS3 line cards.
DS3LineSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a DS3 interface in the interval. This is valid for the DS3XM and DS3 line cards.
DS3LineLOSS	NUMBER(10)	DEFAULT -1	Number of loss of signal seconds encountered by a DS3 interface in the interval.
DS3PBitAIS	NUMBER(10)	DEFAULT -1	Number of alarm indication signal seconds encountered by a DS3 interface in the P-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3PBitCodeViolations	NUMBER(10)	DEFAULT -1	Number of LCVs encountered by a DS3 interface in the P-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3PBitErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a DS3 interface in the P-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3PBitSAS	NUMBER(10)	DEFAULT -1	Number of severely alarmed seconds encountered by a DS3 interface in the P-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3PBitSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a DS3 interface in the P-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3PBitUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a DS3 interface in the P-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3CpBitCodeViolations	NUMBER(10)	DEFAULT -1	Number of LCVs encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3CpBitErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3CpBitSAS	NUMBER(10)	DEFAULT -1	Number of severely alarmed seconds encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3CpBitSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
DS3CpBitUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeDS3CpBitCodeViolations	NUMBER(10)	DEFAULT -1	Number of far end line code violations encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
FeDS3CpBitErrSecs	NUMBER (10)	DEFAULT -1	Number of far end errored seconds encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
FeDS3CpBitSAS	NUMBER (10)	DEFAULT -1	Number of far end errored severely alarmed seconds encountered by a DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
FeDS3CpBitSevErrSecs	NUMBER (10)	DEFAULT -1	Number of far end severely errored seconds encountered by an DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
FeDS3CpBitUnavailableSecs	NUMBER (10)	DEFAULT -1	Number of far end unavailable seconds encountered by an DS3 interface in the CP-bit of the interface in the interval. This is a path variable and is available on the DS3XM card only.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for the PM data.

1.2.135  ONS15454_ENET_PM_Table

The ONS15454_ENET_PM_Table (Table 1-132) contains Ethernet PM data for ONS 15327 and ONS 15454 SONET NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_ENET_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-132 ONS15454_ENET_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type (Ethernet line card) to which this PM data pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	DEFAULT 0	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
IfInOctets	NUMBER(20)	DEFAULT -1	Total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including frame check sequence [FCS] octets).
IfInUcastPkts	NUMBER(20)	DEFAULT -1	Number of packets, delivered by this sublayer to a higher layer, which were not addressed to a multicast or broadcast address at this sublayer.
IfInMulticastPkts	NUMBER(20)	DEFAULT -1	Total number of good packets received that were directed to a multicast address. This number does not include packets directed to the broadcast address.
IfInBroadcastPkts	NUMBER(20)	DEFAULT -1	Total number of good packets received that were directed to the broadcast address. This number does not include multicast packets.
IfInErrors	NUMBER(20)	DEFAULT -1	Total number of errors received.
IfOutOctets	NUMBER(20)	DEFAULT -1	Total number of octets transmitted out of the interface, including framing characters.
IfOutUcastPkts	NUMBER(20)	DEFAULT -1	Total number of packets that higher-level protocols requested to be transmitted that were not addressed to a multicast or broadcast address at this sublayer, including those that were discarded or not sent.
IfOutMulticastPkts	NUMBER(20)	DEFAULT -1	Number of good packets transmitted by this address that were directed to a multicast address. This number does not include packets directed to the broadcast address.
IfOutBroadcastPkts	NUMBER(20)	DEFAULT -1	Number of good packets transmitted by this address that were directed to the broadcast address.
Dot3StatsAlignmentErrors	NUMBER(20)	DEFAULT -1	Total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad FCS with an integral number of octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error).
Dot3StatsFCSErrors	NUMBER(20)	DEFAULT -1	Count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check.
Dot3StatsSingleCollisionFrames	NUMBER(20)	DEFAULT -1	Count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision.
Dot3StatsMultiCollisionFrames	NUMBER(20)	DEFAULT -1	Count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision.
Dot3StatsDeferredTransmissions	NUMBER(20)	DEFAULT -1	Count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
Dot3StatsLateCollisions	NUMBER(20)	DEFAULT -1	Number of times a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. 512 bit-times corresponds to 51.2 microseconds on a 10-Mbps system. A late collision included in a count represented by an instance of this object is also considered a generic collision for purposes of other collision-related statistics.
Dot3StatsExcessiveCollisions	NUMBER(20)	DEFAULT -1	Count of frames for which transmission on a particular interface fails due to excessive collisions.
EtherStatsUndersizePkts	NUMBER(20)	DEFAULT -1	Total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
EtherStatsFragments	NUMBER(20)	DEFAULT -1	Total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad FCS with an integral number of octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error). Note that it is normal for Ethernet fragments to increment, because the count includes runts (which are normal occurrences due to collisions) and noise hits.
EtherStatsOversizePkts	NUMBER(20)	DEFAULT -1	Total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
EtherStatsJabbers	NUMBER(20)	DEFAULT -1	Total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad FCS with an integral number of octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE-5) and section 10.3.1.4 (10BASE-2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
RxPauseFrames	NUMBER(20)	DEFAULT -1	Number of received Ethernet 802.3x pause frames.
TxPauseFrames	NUMBER(20)	DEFAULT -1	Number of transmitted 802.3x pause frames.
RxPktsDropInternalCongestion	NUMBER(20)	DEFAULT -1	Number of received packets dropped due to overflow in G1000-4 frame buffer.
TxPktsDropInternalCongestion	NUMBER(20)	DEFAULT -1	Number of transmit queue drops due to drops in the G1000-4 frame buffer.
RxPackets	NUMBER(20)	DEFAULT -1	Number of packets received since the last counter reset.
TxPackets	NUMBER(20)	DEFAULT -1	Number of packets transmitted since the last counter reset.
RxTotalErrors	NUMBER(20)	DEFAULT -1	Total number of receive errors.
RxRunts	NUMBER(20)	DEFAULT -1	Total number of frames received that are less than 64 bytes in length and have a CRC error.
RxGiants	NUMBER(20)	DEFAULT -1	Number of packets received that are greater than 1548 bytes in length.
TxCollisions	NUMBER(20)	DEFAULT -1	Number of transmit packets that are collisions; the port and the attached device transmitting at the same time caused collisions.
RxGMACDropCounts	NUMBER(20)	DEFAULT -1	Gigabit Ethernet MAC drop counts.
RxThresholdOversizes	NUMBER(20)	DEFAULT -1	Number of packets received with a length longer than 1518 octets.
PortDropCounts	NUMBER(20)	DEFAULT -1	Drop counts per port.
TxGiants	NUMBER(20)	DEFAULT -1	Number of packets transmitted that are greater than 1548 bytes in length.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
EtherUtilizationStats	NUMBER(10)	DEFAULT -1	The line utilization number expresses the average of ingress and egress traffic as a percentage of the total capacity.
HDLCPktDrops	NUMBER(20)	DEFAULT -1	HDLC packet drop.
RxControlFrames	NUMBER(20)	DEFAULT -1	Receive control frames.
RxUnknownOpCodeFrames	NUMBER(20)	DEFAULT -1	Receive unknown opcode frames.
IfInErrorBytePkts	NUMBER(20)	DEFAULT -1	—
IfInFramingErrorPkts	NUMBER(20)	DEFAULT -1	—
IfInJunkInterPkts	NUMBER(20)	DEFAULT -1	—
IfInDiscards	NUMBER(20)	DEFAULT -1	—
IfOutDiscards	NUMBER(20)	DEFAULT -1	—
Dot3StatsFrameTooLong	NUMBER(20)	DEFAULT -1	—
Dot3StatsCarrierSenseErrors	NUMBER(20)	DEFAULT -1	—
Dot3StatsSOETestErrors	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts64Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts65to127Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts128to255Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts256to511Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts512to1023Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts1024to1518Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsBroadcastPkts	NUMBER(20)	DEFAULT -1	—
EtherStatsMulticastPkts	NUMBER(20)	DEFAULT -1	—
EtherStatsOctets	NUMBER(20)	DEFAULT -1	—
EtherStatsCollisions	NUMBER(20)	DEFAULT -1	—
EtherStatsCollisionFrames	NUMBER(20)	DEFAULT -1	—
EtherStatsCRCAlignErrors	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesTruncated	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesTooLong	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesBadCRC	NUMBER(20)	DEFAULT -1	—
MediaIndStatsTxFramesBadCRC	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxShortPkts	NUMBER(20)	DEFAULT -1	—
MediaIndStatsOversizeDropped	NUMBER(20)	DEFAULT -1	—
IfOutErrors	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts	NUMBER(20)	DEFAULT -1	—
Dot3StatsInternalMacTxErrors	NUMBER(20)	DEFAULT -1	—
Dot3StatsInternalMacRxErrors	NUMBER(20)	DEFAULT -1	—
Dot3StatsSymbolErrors	NUMBER(20)	DEFAULT -1	—
MediaIndStatsTxFramesTooLong	NUMBER(20)	DEFAULT -1	—
RxEtherUtilizationStats	NUMBER(10)	DEFAULT -1	—
TxEtherUtilizationStats	NUMBER(10)	DEFAULT -1	—
StatsLineLastClearedTime	DATE	—	Time stamp when Ethernet statistics were last cleared.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.136  ONS15454_FC_PM_Table

The ONS15454_FC_PM_Table (Table 1-133) is used for fiber channel transport PM data accumulated on FCMR_4 cards.

Primary key: ONS15454_FC_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-133 ONS15454_FC_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether NE was In Maintenance state when PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Fifteen-minute interval threshold value for the PM bucket.
thresholdList	VARCHAR2 (1024)	—	Daily threshold value for the PM bucket.
fibreStatsInvalidOrderedS ets	NUMBER(20)	DEFAULT -1	Number of invalid ordered sets received.
fibreStatsEncodingDispErr ors	NUMBER(20)	DEFAULT -1	A count of the disparity errors received by the serial/deserializer.
fibreStatsRxTotalErrors	NUMBER(20)	DEFAULT -1	A count of 10b errors received by the serial/deserializer.
fibreStatsRxFramesTruncat ed	NUMBER(20)	DEFAULT -1	A count of the received fiber channel frames < 36 bytes including CRC, start of frame (SOF), and end of frame (EOF).
fibreStatsRxFramesTooLong	NUMBER(20)	DEFAULT -1	A count of the received fiber channel frames > 2116 bytes of the payload. Four bytes are allowed for supporting VSAN tags sent.
fibreStatsRxFramesBadCRC	NUMBER(20)	DEFAULT -1	A count of the received fiber channel frames with errored CRCs.
fibreStatsRxFrames	NUMBER(20)	DEFAULT -1	A count of the number of fiber channel frames received without errors.
fibreStatsRxOctets	NUMBER(20)	DEFAULT -1	A count of the number of bytes received without error for the fiber channel payload.
fibreStatsRxDiscards	NUMBER(20)	DEFAULT -1	Number of inbound discarded packets.
fibreStatsTxFramesBadCRC	NUMBER(20)	DEFAULT -1	A count of the transmitted fiber channel frames with errored CRCs.
fibreStatsTxFrames	NUMBER(20)	DEFAULT -1	A count of the number of transmitted fiber channel frames.
fibreStatsTxOctets	NUMBER(20)	DEFAULT -1	A count of the number of bytes transmitted from the fiber channel frame.
fibreStatsTxDiscards	NUMBER(20)	DEFAULT -1	Number of discarded packets.
fibreStatsLinkResets	NUMBER(20)	DEFAULT -1	A count of the FC-MR software initiated link recovery attempts toward the FC line side because of SONET protection switches.
gfpStatsRxSBitErrors	NUMBER(20)	DEFAULT -1	A count of generic framing procedure (GFP) single bit errors in the core header error check (CHEC).
gfpStatsRxMBitErrors	NUMBER(20)	DEFAULT -1	A count of GFP multibit errors in the core header error check (CHEC).
gfpStatsRxTypeInvalid	NUMBER(20)	DEFAULT -1	A count of GFP invalid user payload identifier (UPI) field in the type field.
gfpStatsRxSblkCRCErrors	NUMBER(20)	DEFAULT -1	A count of superblock CRC errors in the transparent GFP frame.
RxFCUtilizationStats	NUMBER(10)	DEFAULT -2	Percentage of received line bandwidth used by the ports during consecutive time segments.
TxFCUtilizationStats	NUMBER(10)	DEFAULT -2	Percentage of transmitted line bandwidth used by the ports during consecutive time segments.
StatsLineLastClearedTime	DATE	—	Time stamp indicating the last time statistics were reset.
gfpStatsCSFRaised	NUMBER(20)	DEFAULT -1	—
gfpStatsRoundTripLatency	NUMBER(20)	DEFAULT -1	—
IfInErrors	NUMBER(20)	DEFAULT -1	—
FibreStatsLinkRecoveries	NUMBER(20)	DEFAULT -1	—
FCIngressRxDistanceExtBuf fers	NUMBER(20)	DEFAULT -1	—
FCEgressTTxDistanceExtBuf fers	NUMBER(20)	DEFAULT -1	—
FibreStatsRxCredits	NUMBER(20)	DEFAULT -1	—
FibreStatsTxCredits	NUMBER(20)	DEFAULT -1	—
FibreStatsZeroTxCredits	NUMBER(20)	DEFAULT -1	—
TxPackets	NUMBER(20)	DEFAULT -1	—
RxPackets	NUMBER(20)	DEFAULT -1	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.137  ONS15454_IFX_PM_Table

The ONS15454_IFX_PM_Table (Table 1-134) is used for IFX PM data where the module type is an ML-series card.

Primary key: ONS15454_IFX_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-134 ONS15454_IFX_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether the NE is In Maintenance state when the PM bucket is collected.
IfName	VARCHAR2(40	—	—
IfHCInOctets	NUMBER(20)	DEFAULT 0	—
IfHCOutOctets	NUMBER(20)	DEFAULT 0	—
IfHCInUcasrPkts	NUMBER(20)	DEFAULT 0	—
IfHCOutUcastPkts	NUMBER(20)	DEFAULT 0	—
IfHCInBroadcastPkts	NUMBER(20)	DEFAULT 0	—
IfHCOutBroadcastPkts	NUMBER(20)	DEFAULT 0	—
IfHCInMulticastPkts	NUMBER(20)	DEFAULT 0	—
IfHCOutMulticastPkts	NUMBER(20)	DEFAULT 0	—
IfInDiscards	NUMBER(20)	DEFAULT 0	—
IfOutDiscards	NUMBER(20)	DEFAULT 0	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.138  ONS15454_Match_STMT_PM_Table

This table is used for PM data where the module type is an ML-series card.

Primary key: None

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-135 ONS15454_Match_STMT_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Indicates status of the PM bucket. Valid values are: 0: Valid period Other: Bit Mask Value
inMaintenance	NUMBER(1)	—	Indicates whether the NE was In Maintenance state when the PM bucket was collected.
CBQosMatchPrePolic yPkt64	NUMBER(20)	DEFAULT 0	—
CBQosMatchPrePolic yByte64	NUMBER(20)	DEFAULT 0	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.139  ONS15454_NE_Inventory_Table

The ONS15454_NE_Inventory_Table (Table 1-136) stores inventory information about ONS 15454 SONET and ONS 15454 SDH NEs.

Primary key: ONS15454_NE_INVENTORY_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-136 ONS15454_NE_Inventory_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location of the card.
EquipmentType	NUMBER(10)	—	Equipment type index in the Module_Type_Table. This value represents the configured value of the slot.
AdminState	VARCHAR2(32)	—	Admin state of the equipment.
ServiceState	VARCHAR2(150)	—	Service state of the equipment.
ActualEquipmentType	NUMBER(10)	—	Equipment type index in the Module_Type_Table. This value represents the actual card in the slot.
HWPartNumber	VARCHAR2(16)	—	Hardware version of the module.
SerialNumber	VARCHAR2(16)	—	Serial number of the module.
Name	VARCHAR2(50)	—	Name of the module.
ApplicationFileName	VARCHAR2(30)	—	Name of the software binary file for the module.
ExtraInfo	VARCHAR2(4000)	—	Extra information about the module.
FirmwareVersion	VARCHAR2(16)	—	Firmware version of the module.
EquipmentState	NUMBER(1)	DEFAULT 1	State of the module. Values are: 0: Not Present 1: Mismatch 2: Loading 3: Failed 4: Standby 5: Active 6: Empty
EntityID	NUMBER(10)	—	Entity ID assigned to the module.
HardwareRevision	VARCHAR2(7)	—	Manufacturer/hardware revision.
CleiCode	VARCHAR2(20)	—	CLEI code for the card.
InventoryCode	VARCHAR2(40)	DEFAULT NULL	Provisionable inventory code.
ProductId	VARCHAR2(20)	DEFAULT NULL	Product ID.
VersionId	VARCHAR2(20)	DEFAULT NULL	Version ID.
LastInterfaceChange	NUMBER(20)	DEFAULT 0	Last interface change time stamp.

1.2.140  ONS15454_OTN_Fec_PM_Table

The ONS15454_OTN_Fec_PM_Table (Table 1-137) is used for OC-N PM data where the module type is an OC-N line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_OTNFEC_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-137 ONS15454_OTN_Fec_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access the ONS15454_OTN_Fec_PM_Table; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NetIfIndex	NUMBER(20)	NOT NULL	Table index for the interface. Same as IfStaticIndex of INTERFACE_TABLE.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid Period Other: Bit Mask Value (info about PM stats)
inMaintenance	NUMBER(1)	—	Indicates whether NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
BitErrsCorrected	NUMBER(20)	DEFAULT -1	Number of bit errors corrected.
ByteErrsCorrected	NUMBER(20)	DEFAULT -1	Number of byte errors corrected.
ZeroBitErrsDetected	NUMBER(20)	DEFAULT -1	Number of zero bit errors detected.
OneBitErrsDetected	NUMBER(20)	DEFAULT -1	Number of one-bit errors detected.
UnCorrectableWord	NUMBER(20)	DEFAULT -1	Number of uncorrectable words.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.141  ONS15454_OTN_Path_PM_Table

The ONS15454_OTN_Path_PM_Table (Table 1-138) is used for OCN PM data where the module type is an OCN Line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_OTNPATH_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-138   ONS15454_OTN_Path_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access the ONS15454_OTN_Path_PM_Table; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface. Same as IfStaticIndex of INTERFACE_TABLE.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid Period Other: Bit Mask Value (info about PM stats)
inMaintenance	NUMBER(1)	—	Indicates whether NE is In Service or not.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
ErrSecs	NUMBER(10)	DEFAULT -1	Number of seconds when at least one path layer BIP error is detected or an SEF or LOS defect is present.
SevErrSecs	NUMBER(10)	DEFAULT -1	Count when K or more path layer BIP errors are detected (refer to Telcordia GR-253-CORE for the value of K.)
UnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a path interface in the interval.
BackGroundBlockErr	NUMBER(10)	DEFAULT -1	Number of background block errors in the interval.
FailureCount	NUMBER(10)	DEFAULT -1	Number of failed events.
ErrSecsRatio	NUMBER(10)	DEFAULT -1	Error seconds ratio when at least one path layer BIP error is detected or an SEF or LOS is detected.
SevErrSecsRatio	NUMBER(10)	DEFAULT -1	Severely errored seconds ratio.
BackGroundBlockErrRatio	NUMBER(10)	DEFAULT -1	Number of background block errors ratio in the interval.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeErrSecs	NUMBER(10)	DEFAULT -1	Number of far-end errored seconds encountered by an OCN interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
FeSevErrSecs	NUMBER(10)	DEFAULT -1	Number of far-end severely errored seconds encountered by an OCN interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
FeUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of far-end unavailable seconds encountered by an OCN interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
FeBackGroundBlockErrs	NUMBER(10)	DEFAULT -1	Number of far-end background block errors in the interval.
FeFailureCount	NUMBER(10)	DEFAULT -1	Number of far-end failure count encountered in the interval.
FeErrSecsRatio	NUMBER(10)	DEFAULT -1	Far-end error seconds ratio when at least one path layer BIP error was detected or an SEF or LOS defect is present.
FeSevErrSecsRatio	NUMBER(10)	DEFAULT -1	Far-end severely errored seconds ratio.
FeBackGroundBlockErrRatio	NUMBER(10)	DEFAULT -1	Number of far-end background block errors ratio in the interval.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.142  ONS15454_OTN_Sec_PM_Table

The ONS15454_OTN_Sec_PM_Table (Table 1-139) is used for OCN PM data where the module type is an OCN Line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_OTNSEC_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-139   ONS15454_OTN_Sec_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NetIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid Period Other: Bit Mask Value (info about PM stats)
inMaintenance	NUMBER(1)	—	Indicates whether NE is In Service or not.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
ErrSecs	NUMBER(10)	DEFAULT -1	Number of seconds when at least one section layer BIP error is detected or an SEF or LOS defect is present.
SevErrSecs	NUMBER(10)	DEFAULT -1	Count when K or more section layer BIP errors are detected (refer to Telcordia GR-253-CORE for the value of K.)
UnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a Section interface in the interval.
BackGroundBlockErr	NUMBER(10)	DEFAULT -1	Number of background block error in the interval.
FailureCount	NUMBER(10)	DEFAULT -1	Number of failed events.
ErrSecsRatio	NUMBER(10)	DEFAULT -1	Error seconds ratio when at least one section layer BIP error is detected or an SEF or LOS is detected.
SevErrSecsRatio	NUMBER(10)	DEFAULT -1	Severely errored seconds ratio.
BackGroundBlockErrRatio	NUMBER(10)	DEFAULT -1	Number of background block errors ratio in the interval.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeErrSecs	NUMBER(10)	DEFAULT -1	Number of far-end errored seconds encountered by a CHANNEL interface in the interval. This is valid for the XP_MR_10G and MXP_2.5G_10G cards.
FeSevErrSecs	NUMBER(10)	DEFAULT -1	Number of far-end severely errored seconds encountered by a CHANNEL interface in the interval. This is valid for the XP_MR_10G and MXP_2.5G_10G cards.
FeUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of far-end unavailable seconds encountered by a CHANNEL interface in the interval. This is valid for the XP_MR_10G and MXP_2.5G_10G cards.
FeBackGroundBlockErrs	NUMBER(10)	DEFAULT -1	Number of far-end back ground block errors in the interval.
FeFailureCount	NUMBER(10)	DEFAULT -1	Number of far-end failure count encountered in the interval.
FeErrSecsRatio	NUMBER(10)	DEFAULT -1	Far-end error seconds ratio when at least one section layer BIP error was detected or an SEF or LOS defect is present.
FeSevErrSecsRatio	NUMBER(10)	DEFAULT -1	Far-end severely errored seconds ratio.
FeBackGroundBlockErrRatio	NUMBER(10)	DEFAULT -1	Number of far-end background block errors ratio in the interval.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.143  ONS15454_PHY_LAYER_PM_Table

The ONS 15454_PHY_LAYER_PM_Table (Table 1-140) is used for OC-N/STM Physical PM data of the ONS 15327, ONS 15454 SONET, ONS 15454 SDH, and ONS 15600 NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_PHY_LAYER_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-140   ONS15454_PHY_LAYER_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access this table; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NetIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid Period Other: Bit Mask Value (info about PM stats)
inMaintenance	NUMBER(1)	—	Indicates whether NE is In Service or not.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
LaserBiasCurrent	NUMBER(10)	DEFAULT -1	Laser bias current (normalized).
OpticalPowerTransmitted	NUMBER(10)	DEFAULT -1	Optical power transmitted (normalized).
OpticalPowerReceived	NUMBER(10)	DEFAULT -1	Optical power received (normalized).
MinLaserBias	NUMBER(10)	DEFAULT -1	Minimum laser bias.
AvgLaserBias	NUMBER(10)	DEFAULT -1	Average laser bias.
MaxLaserBias	NUMBER(10)	DEFAULT -1	Maximum laser bias.
MinLaserTemp	NUMBER(10)	DEFAULT -1	Minimum laser temperature.
AvgLaserTemp	NUMBER(10)	DEFAULT -1	Average laser temperature.
MaxLaserTemp	NUMBER(10)	DEFAULT -1	Maximum laser temperature.
MinReceivedLaserTemp	NUMBER(10)	DEFAULT -1	Minimum received laser temperature.
AvgReceivedLaserTemp	NUMBER(10)	DEFAULT -1	Average received laser temperature.
MaxReceivedLaserTemp	NUMBER(10)	DEFAULT -1	Maximum received laser temperature.
MinTransReceiverVoltage	NUMBER(10)	DEFAULT -1	Minimum transreceiver voltage.
AvgTransReceiverVoltage	NUMBER(10)	DEFAULT -1	Average transreceiver voltage.
MaxTransReceiverVoltage	NUMBER(10)	DEFAULT -1	Maximum transreceiver voltage.
MinTransmittedPower	NUMBER(10)	DEFAULT -1	Minimum transmitted power.
AvgTransmittedPower	NUMBER(10)	DEFAULT -1	Average transmitted power.
MaxTransmittedPower	NUMBER(10)	DEFAULT -1	Maximum transmitted power.
MinReceivedPower	NUMBER(10)	DEFAULT -1	Minimum received power.
AvgReceivedPower	NUMBER(10)	DEFAULT -1	Average received power.
MaxReceivedPower	NUMBER(10)	DEFAULT -1	Maximum received power.
MinPassThroughPower	NUMBER(10)	DEFAULT -1	Minimum passthrough power.
AvgPassThroughPower	NUMBER(10)	DEFAULT -1	Average passthrough power.
MaxPassThroughPower	NUMBER(10)	DEFAULT -1	Maximum passthrough power.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.144  ONS15454_Police_PM_Table

This table (Table 1-141) is used for CBQOS PM data where the module type is an ML-series card.

Primary key: ONS15454_QOSPLS_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-141 ONS15454_Police_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access this table; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type to which the PM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Indicates the status of the PM bucket. Valid values are: 0: Valid period Other: Bit mask value
inMaintenance	NUMBER(1)	—	Indicates whether the NE was In Maintenance state when the PM bucket was collected.
CBQosPoliceConform edPkt64	NUMBER(20)	DEFAULT 0	—
CBQosPoliceConform edByte64	NUMBER(20)	DEFAULT 0	—
CBQosPoliceExceede dPkt64	NUMBER(20)	DEFAULT 0	—
CBQosPoliceExceede dByte64	NUMBER(20)	DEFAULT 0	—
CBQosPoliceViolate dPkt64	NUMBER(20)	DEFAULT 0	—
CBQosPoliceViolate dByte64	NUMBER(20)	DEFAULT 0	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.145  ONS15454_POS_PM_Table

The ONS15454_POS_PM_Table (Table 1-142) is used for POS PM data where the module type is an ML-series card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_DATA_TABLESPACE

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-142   ONS15454_POS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID used to access this table; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface. Same as IfStaticIndex of INTERFACE_TABLE.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid Period Other: Bit Mask Value (info about PM stats)
inMaintenance	NUMBER(1)	—	Indicates whether NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
POSStatsRxPreHdlcBytes	NUMBER(20)	DEFAULT -1	Number of bytes received prior to the bytes undergoing high-level data link control (HDLC) encapsulation by the policy engine.
POSStatsRxPostHdlcBytes	NUMBER(20)	DEFAULT -1	Number of bytes received after the bytes undergoing HDLC encapsulation by the policy engine.
PosStatsRxPackets	NUMBER(20)	DEFAULT -1	Number of packets received since the last counter reset.
PosStatsRxNormalPackets	NUMBER(20)	DEFAULT -1	Number of normal packets received since the last counter reset.
PosStatsRxShorts	NUMBER(20)	DEFAULT -1	Number of short packets received since the last counter reset.
PosStatsRxRunts	NUMBER(20)	DEFAULT -1	Total number of frames received that are less than 64 bytes in length and have a CRC error.
PosStatsRxLongs	NUMBER(20)	DEFAULT -1	Number of long packets received since the last counter reset.
PosStatsRxTotalErrors	NUMBER(20)	DEFAULT -1	Total number of received errors.
PosStatsRxCrcErrors	NUMBER(20)	DEFAULT -1	Cyclic Redundancy Check (CRC) errors on received frames.
PosStatsRxInputDropPackets	NUMBER(20)	DEFAULT -1	Number of packets received that have been dropped in input.
PosStatsRxInputAbortPackets	NUMBER(20)	DEFAULT -1	Number of packets received that have been aborted in input.
PosStatsTxPreHdlcBytes	NUMBER(20)	DEFAULT -1	Good pre-HDLC bytes transmitted. Bytes from packets which were aborted due to FIFO underflow or an error from the system interface or are smaller than the programmed minimum number of bytes are not included,. These bytes are from the system interface before flags, stuffing, or FCS.
PosStatsTxPostHdlcBytes	NUMBER(20)	DEFAULT -1	Good post-HDLC bytes transmitted. These bytes are from the system interface after the escaping flags and FCS are added.
PosStatsTxPackets	NUMBER(20)	DEFAULT -1	Number of packets transmitted since the last counter reset.
PosStatsDropCounts	NUMBER(20)	DEFAULT -1	Drop counts per port.
EtherStatsDropEvents	NUMBER(20)	DEFAULT -1	—
GfpStatsRxSbitErrors	NUMBER(20)	DEFAULT -1	—
GfpStatsRxMBitErrors	NUMBER(20)	DEFAULT -1	—
GfpStatsRxTypeInvalid	NUMBER(20)	DEFAULT -1	—
GfpStatsRxCRCErrors	NUMBER(20)	DEFAULT -1	—
GfpStatsRxCIDInvalid	NUMBER(20)	DEFAULT -1	—
GfpStatsCSFRaised	NUMBER(20)	DEFAULT -1	—
GfpStatsRxFrame	NUMBER(20)	DEFAULT -1	—
GfsStatsTxFrame	NUMBER(20)	DEFAULT -1	—
GfpStatsRxOctets	NUMBER(20)	DEFAULT -1	—
GfpStatsTxOctets	NUMBER(20)	DEFAULT -1	—
GfpStatsLFDRaised	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesTooLong	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesBadCRC	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxShortPkts	NUMBER(20)	DEFAULT -1	—
HdlcInOctets	NUMBER(20)	DEFAULT -1	—
HdlcRxAborts	NUMBER(20)	DEFAULT -1	—
HdlcOutOctets	NUMBER(20)	DEFAULT -1	—
IfInOctets	NUMBER(20)	DEFAULT -1	—
IfOutOctets	NUMBER(20)	DEFAULT -1	—
RxPktsDropInternalCongestion	NUMBER(20)	DEFAULT -1	—
IfInDiscards	NUMBER(20)	DEFAULT -1	—
RXETHERUTILIZATIONSTATS	NUMBER(20)	DEFAULT -1	—
TXETHERUTILIZATIONSTATS	NUMBER(20)	DEFAULT -1	—
STATSLINELASTCLEAREDTIME	NUMBER(20)	DEFAULT -1	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.146  ONS15454_Privilege_Table

The ONS15454_Privilege_Table (Table 1-143) stores user privilege information for ONS 15454 SONET and ONS 15454 SDH NEs.

Primary key: PK_ONS15454_PRIV_ID

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-143   ONS15454_Privilege_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
PrivilegeId	NUMBER(10)	NOT NULL	Privilege ID. Values are: 0: Retrieve 1: Maintenance 2: Provisioning 3: Superuser
Privilege	VARCHAR2(30)	NOT NULL	Privilege level. Values are: 0: Retrieve 1: Maintenance 2: Provisioning 3: Superuser
Description	VARCHAR2(64)	—	Description.

1.2.147  ONS15454_SONET_Line_PM_Table

The ONS15454_SONET_Line_PM_Table (Table 1-144) stores SONET line PM information for ONS 15327 and ONS 15454 SONET NEs. This table is used for OC-N PM data where the module type is an OC-N or EC1 line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_LINE_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-144   ONS15454_SONET_Line_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
CodeViolations	NUMBER(10)	DEFAULT -1	Number of LCVs encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
ErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
SevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
UnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
PpjcPdet	NUMBER(10)	DEFAULT -1	Positive Pointer Justification Count, Path Detected is a count of the positive pointer justifications detected on a particular path on an incoming signal.
NpjcPdet	NUMBER(10)	DEFAULT -1	Negative Pointer Justification Count, Path Detected is a count of the negative pointer justifications detected on a particular path on an incoming signal.
PpjcPgen	NUMBER(10)	DEFAULT -1	Positive Pointer Justification Count, Path Generated is a count of the positive pointer justifications generated for a particular path.
NpjcPgen	NUMBER(10)	DEFAULT -1	Negative Pointer Justification Count, Path Generated is a count of the negative pointer justifications generated for a particular path.
FcL	NUMBER(10)	DEFAULT -1	Line failure count (FC-L) encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards. FC-L is a count of the number of near-end line failure events. A failure event begins when a line alarm indication signal (AIS-L) failure is declared or when a lower-layer, traffic-related, near-end failure is declared. This failure event ends when the failure is cleared. A failure event that begins in one period and ends in another period is counted only in the period where it begins.
Psc	NUMBER(10)	DEFAULT -1	Protection switching count (PSC) encountered by an OC-N interface in the interval. This is valid for the OC12 and OC3 only. In a 1 + 1 protection scheme for a working card, PSC is a count of the number of times service switches from a working card to a protection card plus the number of times service switches back to the working card. For a protection card, PSC is a count of the number of times service switches to a working card from a protection card plus the number of times service switches back to the protection card. The PSC PM is only applicable if revertive line-level protection switching is used.
Psd	NUMBER(10)	DEFAULT -1	Protection switching duration (PSD) count encountered by an OC-N interface in the interval. This is valid for the OC12 and OC3 only. PSD applies to the length of time, in seconds, that service is carried on another line. For a working line, PSD is a count of the number of seconds that service was carried on the protection line. For the protection line, PSD is a count of the seconds that the line was used to carry service. The PSD PM is only applicable if revertive line-level protection switching is used.
PjDiff	NUMBER(10)	DEFAULT -1	Displays the sum of the absolute values of differences between positive transmitted and received, and negative transmitted and received. The important metric on pointer justification is not the exact counts, but how many were absorbed.
PjpSec	NUMBER(10)	DEFAULT -1	Indicates the number of Pointer Justification Count Seconds detected on a particular path.
PjnSec	NUMBER(10)	DEFAULT -1	Indicates the number of Pointer Justification Count Seconds generated for a particular path.
Pscw	NUMBER(10)	DEFAULT -1	Protection switching count-working.
Psdw	NUMBER(10)	DEFAULT -1	Protection switching duration-working.
Pscr	NUMBER(10)	DEFAULT -1	Protection switching count-ring.
Psdr	NUMBER(10)	DEFAULT -1	Protection switching duration-ring.
Pscs	NUMBER(10)	DEFAULT -1	Protection switching count-span.
Psds	NUMBER(10)	DEFAULT -1	Protection switching duration-span.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeCodeViolations	NUMBER (10)	DEFAULT -1	Number of line code violations encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
FeErrSecs	NUMBER (10)	DEFAULT -1	Number of errored seconds encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
FeSevErrSecs	NUMBER (10)	DEFAULT -1	Number of severely errored seconds encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
FeUnavailableSecs	NUMBER (10)	DEFAULT -1	Number of unavailable seconds encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
FeFcL	NUMBER (10)	DEFAULT -1	Number of failure count encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.148  ONS15454_SONET_Path_PM_Table

The ONS15454_SONET_Path_PM_Table (Table 1-145) stores SONET path PM information for ONS 15327 and ONS 15454 SONET NEs. This table is used for path PM data where the module type is a DS1, DS1N, DS3, DS3E, DS3N, DS3NE, DS3XM, OC-N, or EC1 line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_PATH_LINE_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-145   ONS15454_SONET_Path_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	DEFAULT 0	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
SonetPathCodeViolations	NUMBER(10)	DEFAULT -1	Number of LCVs encountered by a path interface in the interval. This is valid for the OC12, OC3, and DS3XM cards.
SonetPathErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a path interface in the interval. This is valid for the OC12, OC3, and DS3XM cards.
SonetPathSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a path interface in the interval. This is valid for the OC12, OC3, and DS3XM cards.
SonetPathUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a path interface in the interval. This is valid for the OC12, OC3, and DS3XM cards.
SonetPathFC	NUMBER(10)	DEFAULT -1	Failure count. Number of path failure events.
PpjcPdet	NUMBER(10)	DEFAULT -1	Positive Pointer Justification Count, Path Detected is a count of the positive pointer justifications detected on a particular path on an incoming signal.
NpjcPdet	NUMBER(10)	DEFAULT -1	Negative Pointer Justification Count, Path Detected is a count of the negative pointer justifications detected on a particular path on an incoming signal.
PpjcPgen	NUMBER(10)	DEFAULT -1	Positive Pointer Justification Count, Path Generated is a count of the positive pointer justifications generated for a particular path.
NpjcPgen	NUMBER(10)	DEFAULT -1	Negative Pointer Justification Count, Path Generated is a count of the negative pointer justifications generated for a particular path.
PjDiff	NUMBER(10)	DEFAULT -1	Displays the sum of the absolute values of differences between positive transmitted and received, and negative transmitted and received. The important metric on pointer justification is not the exact counts, but how many were absorbed.
PjpSec	NUMBER(10)	DEFAULT -1	Indicates the number of Pointer Justification Count Seconds detected on a particular path.
PjnSec	NUMBER(10)	DEFAULT -1	Indicates the number of Pointer Justification Count Seconds generated for a particular path.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeSonetPathCodeViolations	NUMBER (10)	DEFAULT -1	Number of code violations encountered by a path interface in the interval. This is valid for the far-end OC12, OC3, and DS3XM cards.
FeSonetPathErrSecs	NUMBER (10)	DEFAULT -1	Number of errored seconds encountered by a path interface in the interval. This is valid for the far-end OC12, OC3, and DS3XM cards.
FeSonetPathSevErrSecs	NUMBER (10)	DEFAULT -1	Number of severely errored seconds encountered by a path interface in the interval. This is valid for the far-end OC12, OC3, and DS3XM cards.
FeSonetPathUnavaliableSecs	NUMBER (10)	DEFAULT -1	Number of unavailable seconds encountered by a path interface in the interval. This is valid for the far-end OC12, OC3, and DS3XM cards.
FeSonetPathFC	NUMBER (10)	DEFAULT -1	Number of far-end path failure events.
STSPathWidth	NUMBER (4)	DEFAULT -1	Size of the STS. This is valid for the OC-N/STM-N cards. Possible values are: 1: STS-1 3: STS-3c 6: STS-6c 12: STS-12c
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.149  ONS15454_SONET_Sec_PM_Table

The ONS15454_SONET_Sec_PM_Table (Table 1-146) stores OC-N or EC1 line card PM information for ONS 15327 and ONS 15454 SONET NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_SONET_SEC_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-146   ONS15454_SONET_Sec_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
SevErrFrameSecs	NUMBER(10)	DEFAULT -1	Number of section severely errored frame seconds encountered by an OC-N interface in the interval. This is valid for the OC12, OC3, and EC1 cards.
CodeViolations	NUMBER(10)	DEFAULT -1	Number of bit interleaved parity (BIP) errors detected at the session layer.
ErrSecs	NUMBER(10)	DEFAULT -1	Number of seconds when at least one section layer BIP error was detected or a severely errored frame (SEF) or LOS defect was present.
SevErrSecs	NUMBER(10)	DEFAULT -1	Severely errored seconds is a count when K or more section-layer BIP errors were detected. (Refer to Telcordia GR-253-CORE for the value of K.)
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.150  ONS15454_SONET_VT_PM_Table

The ONS15454_SONET_VT_PM_Table (Table 1-147) stores VT line card PM information for ONS 15327 and ONS 15454 SONET NEs. This table is used for VT PM data where the module type is a DS1, DS1N, or DS3XM line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454_VT_LINE_PM_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-147   ONS15454_SONET_VT_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	DEFAULT 0	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
SonetVTCodeViolations	NUMBER(10)	DEFAULT -1	Number of coding violations encountered by a SONET VT in the interval.
SonetVTErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a VT interface in the interval. This is valid for the DS3XM card.
SonetVTSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a VT interface in the interval. This is valid for the DS3XM card.
SonetLineUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a VT interface in the interval. This is valid for the DS3XM card.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeSonetVTCodeViolations	NUMBER(10)	DEFAULT -1	Number of coding violations encountered by a SONET VT in the interval (far end).
FeSonetVTErrSecs	NUMBER (10)	DEFAULT -1	Number of errored seconds encountered by a VT interface in the interval (far end). This is valid for the DS3XM card.
FESonetVTSevErrSecs	NUMBER (10)	DEFAULT -1	Number of severely errored seconds encountered by a VT interface in the interval (far end). This is valid for the DS3XM card.
FeSonetLineUnavailableSecs	NUMBER (10)	DEFAULT -1	Number of unavailable seconds encountered by a VT interface in the interval (far end). This is valid for the DS3XM card.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.151  ONS15454_User_Table

The ONS15454_User_Table (Table 1-148) stores user information for ONS 15454 SONET and ONS 15454 SDH NEs.

Primary key: ONS15454_USER_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-148   ONS15454_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_TABLE.
UserId	VARCHAR2(64)	NOT NULL	ONS 15454 SONET and ONS 15454 SDH username.
PrivilegeId	NUMBER(10)	—	Privilege level.
Lockout	NUMBER(1)	DEFAULT 0	Current lockout status.
LastLoginTime	DATE	—	Time stamp for last login.
FailedLoginCount	NUMBER(10)	—	Count for failed login attempts.
Disabled	NUMBER(1)	DEFAULT 0	Disabled status.
ChangePwdNxtLogin	NUMBER(1)	DEFAULT 0	Change password on next login status.

1.2.152  ONS15454SDH_E1_PM_Table

The ONS15454SDH_E1_PM_Table (Table 1-149) stores PM information for the E1 card in ONS 15454 SDH NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454SDH_E1_PM_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-149   ONS15454SDH_E1_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT -1	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(20)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
cvl	NUMBER(10)	DEFAULT -1	Line coding violation (CV-L) indicates the number of coding violations occurring on the line. This parameter is a count of bipolar violations (BPVs) and excessive zeros (EXZs) occurring over the accumulation period.
esl	NUMBER(10)	DEFAULT -1	Line errored seconds (ES-L) is a count of the seconds containing one or more anomalies (BPV + EXZ) and/or defects (loss of signal) on the line.
sesl	NUMBER(10)	DEFAULT -1	Line severely errored seconds (SES-L) is a count of the seconds containing more than a particular quantity of anomalies (BPV + EXZ > 2048) and/or defects on the line.
lossl	NUMBER(10)	DEFAULT -1	—
RxPEb	NUMBER(10)	DEFAULT -1	Receive (Rx) path errored block (EB-P) indicates that one or more bits are in error within a block.
RxPBbe	NUMBER(10)	DEFAULT -1	Rx path background block error (BBE-P) is an errored block not occurring as part of a severely errored second (SES).
RxPes	NUMBER(10)	DEFAULT -1	Rx path errored seconds (ES-P) is a 1-second period with one or more errored blocks or at least one defect.
RxPses	NUMBER(10)	DEFAULT -1	Rx path severely errored seconds (SES-P) is a 1-second period containing greater than 30 percent errored blocks or at least one defect. SES is a subset of errored seconds (ES).
RxPUas	NUMBER(10)	DEFAULT -1	Rx path unavailable seconds (E1 Rx UAS-P) is a count of 1-second intervals when the E1 path is unavailable on the receive end of the signal. The E1 path is unavailable when ten consecutive SESs occur. The ten SESs are included in unavailable time. After it becomes unavailable, the E1 path becomes available when ten consecutive seconds occur with no SESs. The ten seconds with no SESs are excluded from unavailable time.
RxPEsr	NUMBER(10)	DEFAULT -1	Rx path errored second ratio (ESR-P) is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
RxPSesr	NUMBER(10)	DEFAULT -1	Rx path severely errored second ratio (SESR-P) is the ratio of SES to total seconds in available time during a fixed measurement interval.
RxPBber	NUMBER(10)	DEFAULT -1	Rx path background block error ratio (BBER) is the ratio of background block errors (BBE) to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
TxAiss	NUMBER(10)	DEFAULT -1	Tx alarm indication signal seconds (AISS) is a count of 1-second intervals containing one or more AIS defects.
TxPEb	NUMBER(10)	DEFAULT -1	Tx EB-P indicates that one or more bits are in error within a block.
TxPBbe	NUMBER(10)	DEFAULT -1	Tx path background block error (BBE-P) is an errored block not occurring as part of an SES.
TxPes	NUMBER(10)	DEFAULT -1	Tx ES-P is a 1-second period with one or more errored blocks or at least one defect.
TxPses	NUMBER(10)	DEFAULT -1	Tx path severely errored seconds (SES-P) is a 1-second period containing greater than 30 percent errored blocks or at least one defect. SES is a subset of ES.
TxPUas	NUMBER(10)	DEFAULT -1	E1 Tx UAS-P is a count of 1-second intervals when the E1 path is unavailable on the transmit end of the signal. The E1 path is unavailable when ten consecutive SESs occur. The ten SESs are included in unavailable time. After it becomes unavailable, the E1 path becomes available when ten consecutive seconds occur with no SESs. The ten seconds with no SESs are excluded from unavailable time.
TxPEsr	NUMBER(10)	DEFAULT -1	Tx ESR-P is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
TxPSesr	NUMBER(10)	DEFAULT -1	Tx SESR-P is the ratio of SES to total seconds in available time during a fixed measurement interval.
TxPBber	NUMBER(10)	DEFAULT -1	Tx BBER-P is the ratio of BBE to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
RxAiss	NUMBER(10)	DEFAULT -1	Rx AISS is a count of 1-second intervals containing one or more AIS defects.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeRxPEb	NUMBER(10)	DEFAULT -1	Rx EB-P indicates that one or more bits are in error within a block (far end).
FeRxPEs	NUMBER(10)	DEFAULT -1	Rx ES-P is a 1-second period with one or more errored blocks or at least one defect (far end).
FeRxPSes	NUMBER(10)	DEFAULT -1	Rx path severely errored seconds (SES-P) is a 1-second period containing greater than 30 percent errored blocks or at least one defect (far end). SES is a subset of ES.
FeRxPBbe	NUMBER(10)	DEFAULT -1	Rx path background block error (BBE-P) is an errored block not occurring as part of an SES (far end).
FeRxPUas	NUMBER(10)	DEFAULT -1	Rx UAS-P is a count of 1-second intervals when the E1 path is unavailable on the receive end of the signal (far end). The E1 path is unavailable when ten consecutive SESs occur. The ten SESs are included in unavailable time. After it becomes unavailable, the E1 path becomes available when ten consecutive seconds occur with no SESs. The ten seconds with no SESs are excluded from unavailable time.
FeRxPEsr	NUMBER(10)	DEFAULT -1	Rx ESR-P is the ratio of errored seconds to total seconds in available time during a fixed measurement interval (far end).
FeRxPSesr	NUMBER(10)	DEFAULT -1	Rx SESR-P is the ratio of SES to total seconds in available time during a fixed measurement interval (far end).
FeRxPBber	NUMBER(10)	DEFAULT -1	Rx BBER-P is the ratio of BBE to total blocks in available time during a fixed measurement interval (far end). The count of total blocks excludes all blocks during SESs.
FeTxPEb	NUMBER(10)	DEFAULT -1	Tx EB-P indicates that one or more bits are in error within a block (far end).
FeTxPEs	NUMBER(10)	DEFAULT -1	Tx ES-P is a 1-second period with one or more errored blocks or at least one defect (far end).
FeTxPSes	NUMBER(10)	DEFAULT -1	Tx path severely errored seconds (SES-P) is a 1-second period containing greater than 30 percent errored blocks or at least one defect (far end). SES is a subset of ES.
FeTxPBbe	NUMBER(10)	DEFAULT -1	Tx path background block error (BBE-P) is an errored block not occurring as part of an SES (far end).
FeTxPUas	NUMBER(10)	DEFAULT -1	Tx UAS-P is a count of 1-second intervals when the E1 path is unavailable on the transmit end of the signal (far end). The E1 path is unavailable when ten consecutive SESs occur. The ten SESs are included in unavailable time. After it becomes unavailable, the E1 path becomes available when ten consecutive seconds occur with no SESs. The ten seconds with no SESs are excluded from unavailable time.
FeTxPEsr	NUMBER(10)	DEFAULT -1	Tx ESR-P is the ratio of errored seconds to total seconds in available time during a fixed measurement interval (far end).
FeTxPSesr	NUMBER(10)	DEFAULT -1	Tx SESR-P is the ratio of SES to total seconds in available time during a fixed measurement interval (far end).
FeTxPBber	NUMBER(10)	DEFAULT -1	Tx BBER-P is the ratio of BBE to total blocks in available time during a fixed measurement interval (far end). The count of total blocks excludes all blocks during SESs.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.153  ONS15454SDH_E3_PM_Table

The ONS15454SDH_E3_PM_Table (Table 1-150) stores PM information for the E3 card in ONS 15454 SDH NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454SDH_E3_PM_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-150   ONS15454SDH_E3_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
cvl	NUMBER(10)	DEFAULT -1	CV-L indicates the number of coding violations occurring on the line. This parameter is a BPVs and EXZs occurring over the accumulation period.
esl	NUMBER(10)	DEFAULT -1	ES-L is a count of the seconds containing one or more anomalies (BPV + EXZ) and/or defects (loss of signal) on the line.
sesl	NUMBER(10)	DEFAULT -1	SES-L is a count of the seconds containing more than a particular quantity of anomalies (BPV + EXZ > 44) and/or defects on the line.
lossl	NUMBER(10)	DEFAULT -1	Line loss-of-signal seconds (LOSS-L) is a count of 1-second intervals containing one or more LOS defects.
RxPes	NUMBER(10)	DEFAULT -1	Rx ES-P is a 1-second period with at least one defect.
RxPses	NUMBER(10)	DEFAULT -1	Rx SES-P is a 1-second period containing at least one defect. SES is a subset of ES.
RxPUas	NUMBER(10)	DEFAULT -1	Rx UAS-P is a count of the seconds when the path was unavailable. A path becomes unavailable when ten consecutive seconds occur that qualify as SES-Ps, and it continues to be unavailable until ten consecutive seconds occur that do not qualify as SES-Ps.
RxPEsr	NUMBER(10)	DEFAULT -1	Rx ESR-P is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
RxPSesr	NUMBER(10)	DEFAULT -1	Rx SESR-P is the ratio of SES to total seconds in available time during a fixed measurement interval.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.154  ONS15454SDH_E4_PM_Table

The ONS15454SDH_E4_PM_Table (Table 1-151) stores PM information for the STM1E card that is configured as E4 in ONS 15454 SDH NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454SDH_E4_PM_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-151   ONS15454SDH_E4_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
CodeViolations	NUMBER(10)	DEFAULT -1	Coding violation line.
ErrSecs	NUMBER(10)	DEFAULT -1	Errored seconds line.
SevErrSecs	NUMBER(10)	DEFAULT -1	Severely errored seconds line.
UnavailableSecs	NUMBER(10)	DEFAULT -1	Unavailable seconds line.
BackGroundBlockErrors	NUMBER(10)	DEFAULT -1	Background block errors line.
ESR	NUMBER(10)	DEFAULT -1	Errored seconds ratio line.
SESR	NUMBER(10)	DEFAULT -1	Severely errored seconds ratio line.
BBER	NUMBER(10)	DEFAULT -1	Background block errors ratio.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.155  ONS15454SDH_HO_PM_Table

The ONS15454SDH_HO_PM_Table (Table 1-152) stores high-order (HO) PM information for ONS 15454 SDH NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454SDH_HO_PM_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-152   ONS15454SDH_HO_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
HpEb	NUMBER(10)	DEFAULT -1	HO path EB indicates that one or more bits are in error within a block.
HpEs	NUMBER(10)	DEFAULT -1	HO path ES is a 1-second period with one or more errored blocks or at least one defect.
HpSes	NUMBER(10)	DEFAULT -1	HO path SES is a 1-second period containing greater than 30 percent errored blocks or at least one defect. SES is a subset of ES.
HpUas	NUMBER(10)	DEFAULT -1	HO path UAS is a count of the seconds when the VC path was unavailable. A low-order path becomes unavailable when ten consecutive seconds occur that qualify as HP-SESs, and it continues to be unavailable until ten consecutive seconds occur that do not qualify as HP-SESs.
HpBbe	NUMBER(10)	DEFAULT -1	HO path BBE is an errored block not occurring as part of an SES.
HpEsr	NUMBER(10)	DEFAULT -1	HO path ESR is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
HpSesr	NUMBER(10)	DEFAULT -1	HO path SESR is the ratio of SES to total seconds in available time during a fixed measurement interval.
HpBber	NUMBER(10)	DEFAULT -1	HO path BBER is the ratio of BBE to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
HpPpjcPdet	NUMBER(10)	DEFAULT -1	HP-PPJC-Pdet Multiplex Section, Positive Pointer Justification Count, Path Detected (MS-PPJC-Pdet) is a count of the positive pointer justifications detected on a particular path on an incoming SDH signal.
HpNpjcPdet	NUMBER(10)	DEFAULT -1	HP-NPJC-Pdet Multiplex Section, Negative Pointer Justification Count, Path Detected (MS-NPJC-Pdet) is a count of the negative pointer justifications detected on a particular path on an incoming SDH signal.
HpPpjcPGen	NUMBER(10)	DEFAULT -1	HP-PPJC-Pgen Multiplex Section, Positive Pointer Justification Count, Path Generated (MS-PPJC-Pgen) is a count of the positive pointer justifications generated for a particular path.
HpNpjcPGen	NUMBER(10)	DEFAULT -1	HP-NPJC-Pgen Multiplex Section, Negative Pointer Justification Count, Path Generated (MS-NPJC-Pgen) is a count of the negative pointer justifications generated for a particular path.
HpPjDiff	NUMBER(10)	DEFAULT -1	Indicates the sum of the absolute values of differences between positive transmitted and received, and negative transmitted and received. The important metric on pointer justification is not the exact counts, but how many were absorbed.
HpPjpSec	NUMBER(10)	DEFAULT -1	Indicates the number of Higher Order Path Pointer Justification Count Seconds detected on a particular path.
HpPjnSec	NUMBER(10)	DEFAULT -1	Indicates the number of Higher Order Path Pointer Justification Count Seconds generated for a particular path.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeHpEb	NUMBER(10)	DEFAULT -1	Far end HO path EB indicates that one or more bits are in error within a block.
FeHpEs	NUMBER(10)	DEFAULT -1	Far end HO path ES is a 1-second period with one or more errored blocks or at least one defect.
FeHpSes	NUMBER(10)	DEFAULT -1	Far end HO path SES is a 1-second period containing greater than 30 percent errored blocks or at least one defect. SES is a subset of ES.
FeHpUas	NUMBER(10)	DEFAULT -1	Far end HO path UAS is a count of the seconds when the VC path was unavailable. A low-order path becomes unavailable when ten consecutive seconds occur that qualify as HP-SESs, and it continues to be unavailable until ten consecutive seconds occur that do not qualify as HP-SESs.
FeHpBbe	NUMBER(10)	DEFAULT -1	Far end HO path BBE is an errored block not occurring as part of an SES.
FeHpEsr	NUMBER(10)	DEFAULT -1	Far end HO path ESR is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
FeHpSesr	NUMBER(10)	DEFAULT -1	Far end HO path SESR is the ratio of SES to total seconds in available time during a fixed measurement interval.
FeHpBber	NUMBER(10)	DEFAULT -1	Far end HO path BBER is the ratio of BBE to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
StsPathWidth	NUMBER(4)	DEFAULT -1	Size of the STS. This is valid for the OC-N/STM-N cards. Possible values are: 1: VC4 2: VC4-2c 3: VC4-3c 4: VC4-4c 8: VC4-8c 16: VC4-16c 64: VC4-64c
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.156  ONS15454SDH_LO_PM_Table

The ONS15454SDH_LO_PM_Table (Table 1-153) stores low-order (LO) PM information for ONS 15454 SDH NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454SDH_LO_PM_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-153   ONS15454SDH_LO_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
LoType	NUMBER(1)	—	LO type. Values are: 0: LO VC-3 1: LO VC-12
LoEb	NUMBER(10)	DEFAULT -1	LO EB indicates that one or more bits are in error within a block.
LoBbe	NUMBER(10)	DEFAULT -1	LO BBE is an errored block not occurring as part of an SES.
LoEs	NUMBER(10)	DEFAULT -1	LO ES is a 1-second period with one or more errored blocks or at least one defect.
LoSes	NUMBER(10)	DEFAULT -1	LO SES is a 1-second period containing greater than 30 percent errored blocks or at least one defect. SES is a subset of ES.
LoUas	NUMBER(10)	DEFAULT -1	LO UAS is a count of the seconds when the VC path was unavailable. A low-order path becomes unavailable when ten consecutive seconds occur that qualify as LP-SESs, and it continues to be unavailable until ten consecutive seconds occur that do not qualify as LP-SESs.
LoEsr	NUMBER(10)	DEFAULT -1	LO ESR is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
LoSesr	NUMBER(10)	DEFAULT -1	LO SESR is the ratio of SES to total seconds in available time during a fixed measurement interval.
LoBber	NUMBER(10)	DEFAULT -1	LO BBER is the ratio of BBE to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeLoEb	NUMBER(10)	DEFAULT -1	Far end LO EB indicates that one or more bits are in error within a block.
FeLoBbe	NUMBER(10)	DEFAULT -1	Far end LO BBE is an errored block not occurring as part of an SES.
FeLoEs	NUMBER(10)	DEFAULT -1	Far end LO ES is a 1-second period with one or more errored blocks or at least one defect.
FeLoSes	NUMBER(10)	DEFAULT -1	Far end LO SES is a 1-second period containing greater than 30 percent errored blocks or at least one defect. SES is a subset of ES.
FeLoUas	NUMBER(10)	DEFAULT -1	Far end LO UAS is a count of the seconds when the VC path was unavailable. A low-order path becomes unavailable when ten consecutive seconds occur that qualify as LP-SESs, and it continues to be unavailable until ten consecutive seconds occur that do not qualify as LP-SESs.
FeLoEsr	NUMBER(10)	DEFAULT -1	Far end LO ESR is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
FeLoSesr	NUMBER(10)	DEFAULT -1	Far end LO Severely Errored Second Ratio (SESR) is the ratio of SES to total seconds in available time during a fixed measurement interval.
FeLoBber	NUMBER(10)	DEFAULT -1	Far end LO Background Block Error Ratio (BBER) is the ratio of Background Block Errors (BBE) to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.157  ONS15454SDH_MS_PM_Table

The ONS15454SDH_MS_PM_Table (Table 1-154) stores multiplex section (MS) PM information for ONS 15454 SDH NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454SDH_MS_PM_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-154   ONS15454SDH_MS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
MsEb	NUMBER(10)	DEFAULT -1	MS EB indicates that one or more bits are in error within a block.
MsEs	NUMBER(10)	DEFAULT -1	MS ES is a 1-second period with one or more errored blocks or at least one defect.
MsSes	NUMBER(10)	DEFAULT -1	MS SES is a 1-second period which contains greater than a specified percentage of errored blocks or at least one defect. SES is a subset of ES. For more information, refer to ITU-T G.829 Section 5.1.3.
MsUas	NUMBER(10)	DEFAULT -1	MS UAS is a count of the seconds when the section was unavailable. A section becomes unavailable when ten consecutive seconds occur that qualify as MS-SESs, and it continues to be unavailable until ten consecutive seconds occur that do not qualify as MS-SESs. When the condition is entered, MS-SESs decrement and then count toward MS-UAS.
MsPpjcPdet	NUMBER(10)	DEFAULT -1	MS PPJC-Pdet is a count of the positive pointer justifications detected on a particular path on an incoming SDH signal.
MsNpjcPdet	NUMBER(10)	DEFAULT -1	MS NPJC-Pdet is a count of the negative pointer justifications detected on a particular path on an incoming SDH signal.
MsPpjcPGen	NUMBER(10)	DEFAULT -1	MS PPJC-Pgen is a count of the positive pointer justifications generated for a particular path.
MsNpjcPGen	NUMBER(10)	DEFAULT -1	MS NPJC-Pgen is a count of the negative pointer justifications generated for a particular path.
MsPsc	NUMBER(10)	DEFAULT -1	In a 1 + 1 protection scheme for a working card, MS PSC is a count of the number of times service switches from a working card to a protection card plus the number of times service switches back to the working card. For a protection card, MS-PSC is a count of the number of times service switches to a working card from a protection card plus the number of times service switches back to the protection card. The MS-PSC PM is only applicable if revertive line-level protection switching is used.
MsPsd	NUMBER(10)	DEFAULT -1	MS PSD applies to the length of time, in seconds, that service is carried on another line. For a working line, MS-PSD is a count of the number of seconds that service was carried on the protection line. For the protection line, MS-PSD is a count of the seconds that the line was used to carry service. The MS-PSD PM is only applicable if revertive line-level protection switching is used.
MSPscW	NUMBER(10)	DEFAULT -1	For a working line in a 2-fiber MS-SPRing, MS PSC-W is a count of the number of times traffic switches away from the working capacity in the failed line and back to the working capacity after the failure is cleared. PSC-W increments on the failed working line and PSC increments on the active protect line.
MSPsdW	NUMBER(10)	DEFAULT -1	For a working line in a 2-fiber MS-SPRing, MS PSD-W is a count of the number of seconds that service was carried on the protection line. MS-PSD-W increments on the failed working line and PSD increments on the active protect line.
MSPscS	NUMBER(10)	DEFAULT -1	In a 4-fiber MS-SPRing, MS PSC-S is a count of the number of times service switches from a working line to a protection line plus the number of times it switches back to the working line. A count is only incremented if span switching is used.
MSPsdS	NUMBER(10)	DEFAULT -1	In a 4-fiber MS-SPRing, MS PSD-S is a count of the seconds that the protection line was used to carry service. A count is only incremented if span switching is used.
MSPscR	NUMBER(10)	DEFAULT -1	In a 4-fiber MS-SPRing, MS PSC-R is a count of the number of times service switches from a working line to a protection line plus the number of times it switches back to a working line. A count is only incremented if ring switching is used.
MSPsdR	NUMBER(10)	DEFAULT -1	In a 4-fiber MS-SPRing, MS PSD-R is a count of the seconds that the protection line was used to carry service. A count is only incremented if ring switching is used.
MsBbe	NUMBER(10)	DEFAULT -1	MS BBE is a count of errored blocks not occurring as part of an SES.
MsFc	NUMBER(10)	DEFAULT -1	MS FC is a count of the number of failure events.
MsEsr	NUMBER(10)	DEFAULT -1	MS ESR is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
MsSesr	NUMBER(10)	DEFAULT -1	MS SESR is the ratio of SES to total seconds in available time during a fixed measurement interval.
MsBber	NUMBER(10)	DEFAULT -1	MS BBER is the ratio of BBE to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
FeMsEb	NUMBER(10)	DEFAULT -1	Indicates that one or more bits are in error within a block (far end).
FeMsEs	NUMBER(10	DEFAULT -1	FE MS ES is a 1-second period with one or more errored blocks or at least one defect (far end).
FeMsSes	NUMBER(10)	DEFAULT -1	FE MS SES is a 1-second period which contains greater than a specified percentage of errored blocks or at least one defect (far end).
FeMsUas	NUMBER(10)	DEFAULT -1	FE MS UAS is a count of the seconds when the section was unavailable (far end). A section becomes unavailable when ten consecutive seconds occur that qualify as FE MS-SESs, and it continues to be unavailable until ten consecutive seconds occur that do not qualify as FE MS-SESs. When the condition is entered, FE MS-SESs decrement and then count toward FE MS-UAS.
FeMsBbe	NUMBER(10)	DEFAULT -1	FE MS BBE is a count of errored blocks not occurring as part of an SES (far end).
FeMsEsr	NUMBER(10)	DEFAULT -1	FE MS ESR is the ratio of errored seconds to total seconds in available time during a fixed measurement interval (far end).
FeMsSesr	NUMBER(10)	DEFAULT -1	FE MS SESR is the ratio of SES to total seconds in available time during a fixed measurement interval (far end).
FeMsBber	NUMBER(10)	DEFAULT -1	FE MS BBER is the ratio of BBE to total blocks in available time during a fixed measurement interval (far end). The count of total blocks excludes all blocks during SESs.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.158  ONS15454SDH_RS_PM_Table

The ONS15454SDH_RS_PM_Table (Table 1-155) stores regenerator section (RS) PM information for ONS 15454 SDH NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15454SDH_RS_PM_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-155   ONS15454SDH_RS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
RsEb	NUMBER(10)	DEFAULT -1	RS EB indicates that one or more bits are in error within a block.
RsEs	NUMBER(10)	DEFAULT -1	RS ES is a 1-second period with one or more errored blocks or at least one defect.
RsSes	NUMBER(10)	DEFAULT -1	RS SES is a 1-second period which contains greater than 30 percent errored blocks or at least one defect. SES is a subset of ES.
RsBbe	NUMBER(10)	DEFAULT -1	RS BBE is an errored block not occurring as part of an SES.
RsSefs	NUMBER(10)	DEFAULT -1	RS SEFS is a count of the number of SEFSs occurring during the interval.
RsEsr	NUMBER(10)	DEFAULT -1	RS ESR is the ratio of errored seconds to total seconds in available time during a fixed measurement interval.
RsSesr	NUMBER(10)	DEFAULT -1	RS SESR is the ratio of SES to total seconds in available time during a fixed measurement interval.
RsBber	NUMBER(10)	DEFAULT -1	RS BBER is the ratio of BBE to total blocks in available time during a fixed measurement interval. The count of total blocks excludes all blocks during SESs.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.159  ONS15501_NE_Explorer_Table

The ONS15501_NE_Explorer_Table (Table 1-156) contains ONS15501 current values and threshold data.

Primary key: ONS15501_NE_Explorer_PK

Tablespace: ONS155xx_DATA_TABLESPACE

Table 1-156   ONS15501_NE_Explorer_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
TimeStamp	DATE	NOT NULL	Time stamp that shows the intervals at which the set of synched data is stored.
InputOpticalPower	NUMBER(10)	—	Optical power being fed into the amplifier. Unit is in tenths of a decibel per milliwatt.
INPUTOPTICALPOWERMEAN	NUMBER(10)	—	Mean value for optical power.
INPUTOPTICALPOWERTRIGGER	NUMBER(10)	—	Max deviation allowed from the mean without an alarm being generated.
OutputOpticalPower	NUMBER(10)	—	Measured value of raw optical power being generated at the output of the amplifier. Unit is in tenths of a decibel per milliwatt.
OutputOpticalSignalPower	NUMBER(10)	—	Calculated value of output optical power. Unit is in tenths of a decibel per milliwatt. This is the computed value of power, by using the input power and the gain.
OUTPUTOPTICALSIGNALPOWERME AN	NUMBER(10)	—	Mean value for output optical power.
OUTPUTOPTICALSIGNALPWRTRIG GER	NUMBER(10)	—	Max deviation allowed from the mean without an alarm being generated.
OpticalPowerGain	NUMBER(10)	—	Measured value of optical power gain. Unit is in tenths of a decibel per milliwatt.
MEANOPTICALPOWERGAIN	NUMBER(10)	—	Mean deviation measured. Unit in dB.
GAINTRIGGER	NUMBER(10)	—	Max deviation allowed from the mean without an alarm being generated.
AmbientTemp	NUMBER(10)	—	Ambient temperature of the device. Unit is in tenths of a degree Celsius.
AMBIENTTEMPMEAN	NUMBER(10)	—	Mean value for temperature of the device.
AMBIENTTEMPTRIGGER	NUMBER(10)	—	Max deviation allowed from the mean without an alarm being generated.
PowerSupply1Level	NUMBER(10)	—	Power source, first level (volts).
powerSupply2Level	NUMBER(10)	—	Power source, second level (volts).
POWERSUPPLY1STATUS	VARCHAR(20)	—	Status of power supply 1.
POWERSUPPLY2STATUS	VARCHAR(20)	—	Status of power supply 2.

1.2.160  ONS15501_Opt_Power_PM_Table

The ONS15501_Opt_Power_PM_Table (Table 1-157) stores performance monitoring information for the ONS 15501 optical power.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15501_OPT_POWER_PM_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-157   ONS15501_Opt_Power_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
Interval	NUMBER(1)	—	Interval of the PM bucket. Values are: 1: 15 minutes 2: 1-day
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 1: Invalid—Not enough elapsed time 2: Valid period 3: Partial PM (enabled/disabled in this period) 4: Invalid—PM disabled
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
ThresholdMask	NUMBER(20)	—	Threshold mask for the PM bucket in the interval. This does not apply to receive power. Values are: 0: Input optical power (first data column) 2: Output optical signal power (third data column) 3: Power gain (fourth data column) 4: Ambient temperature (fifth data column)
InputOpticalPower	NUMBER(10)	—	Optical power being fed into the amplifier. Unit is in tenths of a decibel per milliwatt.
OutputOpticalPower	NUMBER(10)	—	Measured value of raw optical power being generated at the output of the amplifier. Unit is in tenths of a decibel per milliwatt.
OutputOpticalSignalPower	NUMBER(10)	—	Value of optical output power calculated by using the input power and gain. Unit is in tenths of a decibel per milliwatt.
OpticalPowerGain	NUMBER(10)	—	Measured value of optical power gain. Unit is in tenths of a decibel per milliwatt.
AmbientTemp	NUMBER(10)	—	Ambient temperature of the device. Unit is in tenths of a degree Celsius.
PowerSupply1Level	NUMBER(10)	—	Power source, first level (volts).
powerSupply2Level	NUMBER(10)	—	Power source, second level (volts).
ModelType	NUMBER(5)	NOT NULL	Model type as defined by the object mapper.
ObjectType	NUMBER(10)	NOT NULL	Object type as defined by the object mapper.

1.2.161  ONS155xx_CDL_Flow_Config

The ONS155xx_CDL_Flow_Config table (Table 1-158) provides information about the flows within a CDL-enabled interface for the ONS 155xx.

Primary key: CDLFLOW_CONFIG_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-158   ONS155xx_CDL_Flow_Config 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	IFDBAccessID in the MIB2_Interface_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
CdlXmitFlowId	NUMBER(5)	—	Flow ID assigned to packet to transmit.
CdlRcvFlowId	NUMBER(5)	—	Flow ID assigned to packet to receive.

1.2.162  ONS155xx_CDL_IF_Config

The ONS155xx_CDL_IF_Config table (Table 1-159) provides information about the configuration of CDL on an ONS 15501, ONS 15530, or ONS 15540 interface.

Primary key: CDLPE_CONFIG_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-159   ONS155xx_CDL_IF_Config 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	IFDBAccessID in the MIB2_Interface_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
CdlAdminStatus	NUMBER(2)	—	Indicates whether CDL is enabled or disabled. Values are: 1: Enabled 2: Disabled
CdlForceEndOfHop	NUMBER(2)	—	Indicates whether end-of-hop is enabled. Values are: 1: Enabled 2: Disabled
CdlNodeBehavior	NUMBER(2)	—	Currently configured node behavior. Values are: 1: End of path 2: End of hop 3: CDL regenerator

1.2.163  ONS155xx_CDL_PM_Table

The ONS155xx_CDL_PM_Table (Table 1-160) contains CDL monitoring PM data.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS155xx_CDL_PM_PK

Tablespace: ONS155xx_DATA_TABLESPACE

Table 1-160   ONS155xx_CDL_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
Interval	NUMBER(1)	—	Interval of the PM bucket. Values are: 1: 15 minutes 2: 1-day
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates status of the PM bucket. Values are: 1: Invalid—Not enough elapsed time 2: Valid period 3: Partial PM (enabled/disabled in this period) 4: Invalid PM disabled
InMaintenance	NUMBER(10)	—	Indicates whether or not NE was in the maintenance state when the PM bucket was collected.
ThresholdMask	NUMBER(20)	—	Threshold mask for the PM bucket in the interval. This does not apply to rxPower. Values are: 0: RxHEC 1: RxNonCDL 2: RxInvalidFlowID 3: NetEthernetCRC
RxHEC	NUMBER(20)	—	CDL header error count encountered in the receive direction. Applicable only to the Gigabit Ethernet or 10G interfaces that support CDL. Null for others.
RxNonCDL	NUMBER(20)	—	Counter associated with the number of packets received without a CDL header on this interface.
RxInvalidFlowID	NUMBER(20)	—	Counter associated with the number of CDL flow identifier lookup errors encountered in the receive direction.
NetEthernetCRC	NUMBER(20)	—	Counter provides the number of Ethernet packets with CRC errors.
ModelType	NUMBER(5)	NOT NULL	Model type as defined by the object mapper.
ObjectType	NUMBER(10)	NOT NULL	Object type as defined by the object mapper.

1.2.164  ONS155xx_Circuit_CC_Tbl

The ONS155xx_Circuit_CC_Tbl (Table 1-161) contains circuit-specific cross-connects for the ONS 155xx. For a given circuit, uniquely identified by CktCCDBId, there are one or more circuit cross-connects on a single NE. The CktCcNodeId gives information about the NE on which this cross-connects resides. When 1+1 protection is enabled on an NE, using either splitter or Y-cable, two cross-connects are typically associated with the circuit on the NE. In this case, two rows contain the same circuit and CktCcNodeId information. Each row in this table represents the circuit cross-connects in a single direction (that is, from source to destination). The isWorking and isActive parameters make sense in only one direction.

Primary key: ONS155XX_CIRCUIT_CC_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-161   ONS155xx_Circuit_CC_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
CktCCDBId	NUMBER(10)	NOT NULL	Unique database ID for each circuit cross-connect.
CktNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit to which the cross-connect belongs.
CktUniqueId	NUMBER(10)	NOT NULL	Unique number within each source node. The CktNodeId and CktUniqueId combined result in a CircuitId that is unique in the whole network. Note that these are internal fields and should not be displayed.
CktCCNodeId	NUMBER(10)	NOT NULL	Node ID of the cross-connect that is associated with the circuit.
CktCCSrcPhysicalLoc	NUMBER(20)	—	Physical location of the source endpoint of the cross-connect.
CktCCSrcIfIndex	NUMBER(10)	—	Static CTM IfIndex of the source endpoint of the cross-connect.
CktCCSrcModuleType	NUMBER(8)	—	CTM module type of the source endpoint of the cross-connect.
CktCCSrcObjectType	NUMBER(8)	—	CTM object type of the source endpoint of the cross-connect.
CktCCSrcModelType	NUMBER(8)	—	CTM model type.
CktCCDestPhysicalLoc	NUMBER(20)	—	Physical location of the destination endpoint of the cross-connect.
CktCCDestIfIndex	NUMBER(10)	—	Static CTM IfIndex of the destination endpoint of the cross-connect.
CktCCDestModuleType	NUMBER(8)	—	CTM module type of the destination endpoint of the cross-connect.
CktCCDestObjectType	NUMBER(8)	—	Object type of the destination endpoint of the cross-connect.
CktCCDestModelType	NUMBER(8)	—	Model type of the destination endpoint of the cross-connect.
CktCCSrcWavelength	VARCHAR2(64)	DEFAULT NULL	Wavelength on the source cross-connect side in nanometers (nm).
CktCCDestWavelength	VARCHAR2(64)	DEFAULT NULL	Wavelength on the destination cross-connect side in nm.
CktCCTechnology	NUMBER(1)	DEFAULT 0	Technology involved in this cross-connect. Values are: 0: UNKNOWN 1: DWDM_MUX_DEMUX_TRANSPARENT 2: DWDM_LAMBDA_SWITCHING 3: CISCO_CDL_SUBPORT_SWITCHING 4: DWDM_CLIENT_TRANSPARENT
CktCCSrcState	NUMBER(1)	DEFAULT 4	State of the source side of this cross-connect. Values are: 0: Inactive 1: Stranded 2: Routed 3: Tentative 4: Active
CktCCDestState	NUMBER(1)	DEFAULT 4	State of the destination side of this cross-connect. Values are: 0: Inactive 1: Stranded 2: Routed 3: Tentative 4: Active
IsCktCCWorking	NUMBER(1)	DEFAULT 1	Indicates whether the circuit cross-connect is a working span. Values are: 0: False 1: True
IsCktCCActive	NUMBER(1)	DEFAULT 1	Indicates whether the circuit span carries active traffic. Values are: 0: False 1: True
CktCCDescr	VARCHAR2(256)	—	Description associated with the cross-connect.
CktCCSrcCDLFlowID	NUMBER(3)	DEFAULT -1	CDL flow ID associated with the cross-connect source. Values are 0 to 254.
CktCCDestCDLFlowID	NUMBER(3)	DEFAULT -1	CDL flow ID associated with the cross-connect destination. Values are 0 to 254.

1.2.165  ONS155xx_Circuit_Path_Tbl

The ONS155xx_Circuit_Path_Tbl (Table 1-162) provides the association between an ONS 15501, ONS 15530, or ONS 15540 circuit and its individual paths.

Primary key: CIRCUIT_PATH_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-162   ONS155xx_Circuit_Path_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
CktNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the circuit to which the cross-connect belongs.
CktUniqueId	NUMBER(10)	NOT NULL	Unique number within each source node. The CktNodeId and CktUniqueId combined result in a CircuitId which is unique in the whole network. Note that these are internal fields and should not be displayed.
PATHDBID	NUMBER(10)	NOT NULL	Unique database ID for each unique path.
PathSeqNum	NUMBER(8)	NOT NULL	Sequence number associated with this circuit to path map.

1.2.166  ONS155xx_Circuit_Stack_Tbl

The ONS155xx_Circuit_Stack_Tbl (Table 1-163) contains circuit-to-circuit hierarchy and association for the ONS 155xx.

Primary key: ONS155XX_CIRCUIT_STACK_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-163   ONS155xx_Circuit_Stack_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
LLCktNodeId	NUMBER(10)	NOT NULL	Lower layer circuit node ID.
LLCktUniqueId	NUMBER(10)	NOT NULL	Lower layer circuit unique ID on the specified node ID.
HLCktNodeId	NUMBER(10)	NOT NULL	Higher layer circuit node ID.
HLCktUniqueId	NUMBER(10)	NOT NULL	Higher layer circuit unique ID on the CktNodeId.
LLCktPathDBID	NUMBER(10)	NOT NULL	Path database ID associated with the lower-layer circuit.
HLCktPathDBID	NUMBER(10)	NOT NULL	Path database ID associated with the higher-layer circuit.
LLToHLCktAssocType	NUMBER(1)	DEFAULT 0	Lower layer to higher layer circuit association type. Values are: 0: None 1: 1-to-1 2: Cisco CDL
LLToHLCktAssocTechInfo	VARCHAR2(64)	DEFAULT NULL	Lower layer to higher layer circuit association technology information.

1.2.167  ONS155xx_Condtype_Map

The ONS155xx_Condtype_Map table (Table 1-164) provides information about the mapping between vendor or notification type to CTM condition type for the ONS 155xx.

Primary key: CONDTYPEMAP_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-164   ONS155xx_Condtype_Map 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEModelType	NUMBER(10)	NOT NULL	Model type (not used currently).
DescrId	VARCHAR2(255)	NOT NULL	Vendor or notification ID.
CondType	NUMBER(5)	NOT NULL	Numerical condition type from notification.

1.2.168  ONS155xx_DCRP_Definition_Table

The ONS155xx_DCRP_Definition_Table (Table 1-165) stores the definition of all discrepancies supported within ONS15501, ONS 15530, or ONS 15540 management. The table is statically populated at the install time.

Primary key: ONS155XX_DCRP_DEF_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-165   ONS155xx_DCRP_Definition_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
DcrpTypeDBID	NUMBER(4)	NOT NULL	Unique sequence number generated by database; the link between this table and other tables that contain discrepancy data.
DcrpName	VARCHAR2(64)	NOT NULL	Unique name for the discrepancy.
DcrpSeverity	NUMBER(1)	DEFAULT 1	Severity for the discrepancy. Values are: 1: High 2: Medium 3: Low
DcrpProbCause	VARCHAR2(256)	DEFAULT NULL	Probable cause of the discrepancy.
DcrpRecAction	VARCHAR2(256)	DEFAULT NULL	Recommended action.

1.2.169  ONS155xx_DCRP_Table

The ONS155xx_DCRP_Table (Table 1-166) contains the discrepancy instances of each type for the ONS 155xx.

Primary key: ONS155XX_DCRP_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-166   ONS155xx_DCRP_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
DcrpDBID	NUMBER(10)	NOT NULL	Unique ID generated by the database to identify a discrepancy.
DcrpTypeDBID	NUMBER(4)	NOT NULL	Discrepancy TypeID from Dcrp_Definition.
DcrpIdentifier	VARCHAR2(64)	DEFAULT NULL	Identifier for a discrepancy of a particular type.
NEDBAccessID1	NUMBER(10)	—	ID of the NE where the discrepancy is detected.
NEDBAccessID2	NUMBER(10)	—	ID of the second NE involved in the discrepancy.
DcrpTimeStamp	DATE	—	Time when discrepancy was detected.
DcrpDescr	VARCHAR2(256)	DEFAULT NULL	Description of the discrepancy.
DcrpDetails	VARCHAR2(1024)	DEFAULT NULL	Any details about the discrepancy.

1.2.170  ONS155xx_Discovery_Info_Table

The ONS155xx_Discovery_Info_Table (Table 1-167) contains information about the main discovery and NE discovery for the ONS 155xx.

Primary key: ONS155XX_DISCOVERY_INFO_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-167   ONS155xx_Discovery_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
startTime	DATE	—	Starting time of the discovery.
endTime	DATE	—	Finishing time of the discovery.
status	NUMBER(1)	NOT NULL	Discovery status. Values are: 0: Idle 1: In progress 2: Completed 3: Failed
startMode	NUMBER(1)	NOT NULL	Discovery mode. Values are: 1: Scheduled 2: User-requested 3: Update-triggered
descr	VARCHAR2(256)	—	Description.

1.2.171  ONS155xx_Ether_Hist_PM_Table

The ONS155xx_Ether_Hist_PM_Table (Table 1-168) contains Ethernet RMON history PM data for the ONS 15501, ONS 15530, and ONS 15540.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS155xx_Ether_Hist_PK

Tablespace: ONS155xx_DATA_TABLESPACE

Table 1-168   ONS155xx_Ether_Hist_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
Interval	NUMBER(1)	NOT NULL	Interval of the PM bucket. Values are: 1: 15 minutes 2: 1-day
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates status of the PM bucket. Values are: 1: Invalid—Not enough elapsed time 2: Valid period 3: Partial PM (enabled/disabled in this period) 4: Invalid PM disabled
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was in the maintenance state when the PM bucket was collected.
ThresholdMask	NUMBER(20)	—	Threshold mask for the PM bucket in the interval.
Octets	NUMBER(20)	—	Number of data octets received (including bad packets and FCS octets, but excluding framing bits.)
Pkts	NUMBER(20)	—	Number of packets (including bad packets) received during this sampling interval.
CRCAlignErrors	NUMBER(20)	—	Number of packets received during this sampling interval that had a length (excluding framing FCS octets) between 64 and 1518 octets inclusive, but had either a bad frame check sequence (FCS) with an integral number of octets (FCS error) or a bad FCS with a non-integral number of octets (alignment error).
UndersizePkts	NUMBER(20)	—	Number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.
OversizePkts	NUMBER(20)	—	Number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
ModelType	NUMBER(5)	NOT NULL	Model type as defined by the object mapper.
ObjectType	NUMBER(10)	NOT NULL	Object type as defined by the object mapper.

1.2.172  ONS155xx_FCM_PE_PM_Table

The ONS155xx_FCM_PE_PM_Table (Table 1-169) contains FC port errors PM data for the ONS 15501, ONS 15530, and ONS 15540.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS155xx_FCP_PE_PK

Tablespace: ONS155xx_DATA_TABLESPACE

Table 1-169   ONS155xx_FCM_PE_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
Interval	NUMBER(1)	—	Interval of the PM bucket. Values are: 1: 15 minutes 2: 1-day
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates status of the PM bucket. Values are: 1: Invalid—Not enough elapsed time 2: Valid period 3: Partial PM (enabled/disabled in this period) 4: Invalid PM disabled
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was in the maintenance state when the PM bucket was collected.
ThresholdMaskInterval	NUMBER(20)	—	Threshold mask for the PM bucket in the interval.
RxLinkResets	NUMBER(20)	—	Number of link resets (LR primitive) received.
TxLinkResets	NUMBER(20)	—	Number of link resets (LR primitive) transmitted.
LinkResets	NUMBER(20)	—	Number of times the reset link protocol was initiated on this port. This include the number of loop initialization primitive events on an arbitrated loop.
RxOfflineSequences	NUMBER(20)	—	Number of offline primitive OLS received at this port.
TxOfflineSequences	NUMBER(20)	—	Number of offline primitive OLS transmitted by this port.
LinkFailures	NUMBER(20)	—	Number of link failures. This count is part of the link error status block (LESB) of FC-PH.
LossofSynchs	NUMBER(20)	—	Number of instances of synchronization loss detected at this port. This count is part of the LESB of FC-PH.
LossofSignals	NUMBER(20)	—	Number of instances of signal loss detected at this port. This count is part of the LESB of FC-PH.
PrimSeqProtocolErrors	NUMBER(20)	—	Number of primitive sequence protocol errors detected at this port. This count is part of the LESB of FC-PH.
InvalidTxWords	NUMBER(20)	—	Number of invalid transmission words received at this port. This count is part of the LESB of FC-PH.
InvalidCRCs	NUMBER(20)	—	Number of frames received with invalid CRC. This count is part of the LESB of FC-PH.
InvalidOrderedSets	NUMBER(20)	—	Number of invalid ordered sets received at this port.
FrameTooLongs	NUMBER(20)	—	Number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI.
TruncatedFrames	NUMBER(20)	—	Number of frames received at this port where the frame length was less than the minimum indicated by the frame header.
AddressErrors	NUMBER(20)	—	Number of frames received with unknown addressing.
DelimiterErrors	NUMBER(20)	—	Number of invalid frame delimiters received at this port.
EncodingDisparityErrors	NUMBER(20)	—	Number of encoding disparity errors received at this port.
OtherErrors	NUMBER(20)	—	Number of errors that were detected on this port but were not counted by any other error counter in this row.
ModelType	NUMBER(5)	NOT NULL	Model type as defined by the object mapper.
ObjectType	NUMBER(10)	NOT NULL	Object type as defined by the object mapper.
IfInOctets	NUMBER(20)	—	Received byte count.
IfInUcastPkts	NUMBER(20)	—	Received frame count.
IfOutOctets	NUMBER(20)	—	Transmitted byte count.
IfOutUcastPkts	NUMBER(20)	—	Transmitted frame count.

1.2.173  ONS155xx_Flash_Device_Table

The ONS155xx_Flash_Device_Table (Table 1-170) stores all the Flash devices present on an ONS 155xx. Only the devices which are physically present are stored in the table.

Primary key: ONS155XX_FLASH_DEVICE_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-170   ONS155xx_Flash_Device_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
FlashDevDBID	NUMBER(10)	NOT NULL	Unique sequence number generated by database. This is the link between this table and other tables that contain Flash partition information.
NEDBAccessID	NUMBER(10)	NOT NULL	Database ID of the NE containing the Flash device; same as NEDBAccessID in the NE_Info_Table.
FlashDevIndex	NUMBER(2)	NOT NULL	Flash device sequence number to index within the ciscoFlashDeviceTable.
FlashDevName	VARCHAR2(16)	NOT NULL	Flash device name that refers to the device within the NE.
FlashDevSize	NUMBER(10)	DEFAULT 0	Total size of the Flash device.
FlashDevPartitions	NUMBER(2)	DEFAULT 1	Number of Flash device partitions.
CPUSlotNum	NUMBER(2)	DEFAULT -1	Slot number of the CPU where the Flash device exists.
Status	NUMBER(2)	DEFAULT -1	Status of the Flash bank (active or inactive).

1.2.174  ONS155xx_Flash_Partition_Table

The ONS155xx_Flash_Partition_Table (Table 1-171) stores all the Flash partitions for each Flash device for a given ONS 155xx. Only the read/write Flash partitions are considered.

Primary key: ONS155XX_FLASHPART_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-171   ONS155xx_Flash_Partition_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
FlashPartDBID	NUMBER(10)	NOT NULL	Unique ID generated by database to identify a row in this table.
FlashDevDBID	NUMBER(10)	NOT NULL	ID of the Flash device.
FlashPartIndex	NUMBER(2)	NOT NULL	Flash partition sequence number to index within the ciscoFlashPartitionTable.
FlashPartName	VARCHAR(16)	NOT NULL	Flash device name to refer to the device within the NE.
FlashPartSize	NUMBER(10)	DEFAULT 0	Flash partition size.
FlashPartFreeSize	NUMBER(10)	DEFAULT 0	Free space within a Flash partition.
FlashPartStatus	NUMBER(1)	DEFAULT 3	Flag to indicate the read/write status of the partition. Values are: 1: Read-only 2: Run from Flash 3: Read/write
FlashPartFileNameLen	NUMBER(3)	DEFAULT 64	Maximum file name length supported by file system.

1.2.175  ONS155xx_GRA_CC_TO_CKT_CC_Tbl

The ONS155xx_GRA_CC_TO_CKT_CC_Tbl (Table 1-172) contains associations between granular cross-connects and circuit cross-connects in the ONS 155xx.

Primary key: ONS155XX_GRACCTOCKTCC_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-172   ONS155xx_GRA_CC_TO_CKT_CC_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
GranularCCDBId	NUMBER(10)	NOT NULL	Granular cross-connect database ID.
CktCrossConnectDBId	NUMBER(10)	NOT NULL	Circuit cross-connect database ID.
GranularCCSeqNum	NUMBER(4)	DEFAULT -1	Granular cross-connect sequence number for the associated circuit cross-connect.

1.2.176  ONS155xx_Granular_CC_Tbl

The ONS155xx_Granular_CC_Tbl (Table 1-173) contains NE-specific granular cross-connects for the ONS 155xx.

Primary key: ONS155XX_GRANULAR_CC_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-173   ONS155xx_Granular_CC_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
GCCDBId	NUMBER(10)	NOT NULL	Unique ID for the internal cross-connect.
GCCSrcNodeId	NUMBER(10)	NOT NULL	Source NE ID on which this cross-connect resides.
GCCSrcPhysicalLoc	NUMBER(20)	—	Physical location of the source endpoint of the cross-connect.
GCCSrcIfIndex	NUMBER(10)	—	Static CTM IfIndex of the source endpoint of the cross-connect.
GCCSrcModuleType	NUMBER(8)	—	CTM module type of the source endpoint of the cross-connect.
GCCSrcObjectType	NUMBER(8)	—	CTM object type of the source endpoint of the cross-connect.
GCCSrcModelType	NUMBER(8)	—	CTM model type of the source endpoint of the cross-connect.
GCCDestNodeId	NUMBER(10)	NOT NULL	Destination NE ID on which this cross-connect resides.
GCCDestPhysicalLoc	NUMBER(20)	—	Physical location of the destination endpoint of the cross-connect.
GCCDestIfIndex	NUMBER(10)	—	Static CTM IfIndex of the destination endpoint of the cross-connect.
GCCDestModuleType	NUMBER(8)	—	Module type of the destination endpoint of the cross-connect.
GCCDestObjectType	NUMBER(8)	—	Object type of the destination endpoint of the cross-connect.
GCCDestModelType	NUMBER(8)	—	Model type of the destination endpoint of the cross-connect.
GCCProvisionType	NUMBER(1)	—	Type of internal cross-connect. Values are: 0: Unknown 1: Provisioned 2: Automatic 3: Dynamic
GCCTechnology	NUMBER(1)	DEFAULT 0	Internal cross-connect technology. Values are: 0: Unknown 1: Optical backplane cross-connect 2: Electrical backplane cross-connect 3: Cisco CDL mux/demux 4: Internal optical patch cross-connect 5: External optical patch cross-connect 6: Traffic aggregation 7: Splitter protection cross-connect 8: Optical DWDM mux/demux
GCCProtType	NUMBER(1)	DEFAULT 1	Protection type. Values are: 0: Unknown 1: No protection 2: Splitter protection 3: Y-cable or line card protection 4: Trunk card protection
GCCSrcToDestOperStatus	NUMBER(1)	DEFAULT 1	Status from source to destination. Values are: 0: Unknown 1: Active 2: Inactive
GCCDestToSrcOperStatus	NUMBER(1)	DEFAULT 1	Status from destination to source. Values are: 0: Unknown 1: Active 2: Inactive
GCCAssocLinkType	NUMBER(1)	DEFAULT 0	Associated link types. Values are: 0: Unknown 1: IF cross-connect 2: IF stack 3: Optical patch
GCCAssocLinkDBID	NUMBER(10)	—	Link database ID associated with this granular cross-connect, based on the link type.
GCCDirectionalType	NUMBER(1)	DEFAULT 1	Directional type for the granular cross-connect. Values are: 0: Unidirectional 1: Bidirectional
GCCDescr	VARCHAR2(256)	DEFAULT NULL	Description associated with the granular cross-connect.

1.2.177  ONS155xx_IF_Circuit_Params_Tbl

The ONS155xx_IF_Circuit_Params_Tbl (Table 1-174) provides the circuit name and description information configured by the user, in terms of circuit end-point interfaces, for the ONS 155xx.

Primary key: ONS155XX_IF_CKTNAME_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-174   ONS155xx_IF_Circuit_Params_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(10)	NOT NULL	Source NE ID on which this cross-connect resides; same as NEDBAccessID in the NE_Info_Table.
IfPhysicalLoc	NUMBER(20)	NOT NULL	Physical location of the endpoint.
IfIndex	NUMBER(20)	NOT NULL	Static CTM IfIndex of the endpoint.
IfModuleType	NUMBER(8)	NOT NULL	Module type of the endpoint.
IfObjectType	NUMBER(8)	NOT NULL	Object type of the endpoint.
IfModelType	NUMBER(8)	NOT NULL	Model type of the endpoint.
CktName	VARCHAR(64)	NOT NULL	Circuit name associated with the endpoint.
CktDescr	VARCHAR(256)	NOT NULL	Circuit description associated with the endpoint.

1.2.178  ONS155xx_IF_Optical_Power

The ONS155xx_IF_Optical_Power table (Table 1-175) contains the optical power for the ONS 15501, ONS 15530, and ONS 15540 wave (trunk) ports. The table also contains the object ID of the transparent ports corresponding to the wave interface, making it easy to use this information in the circuit path table (which deals with transponder client ports).

Primary key: ONS155XX_IF_O PTICAL_PWR_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-175   ONS155xx_IF_Optical_Power 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBACCESSID	NUMBER(10)	NOT NULL	NEDBACCESSID of the node containing the optical power interface; same as NEDBAccessID in the NE_Info_Table.
PwrSrcPhysicalLoc	NUMBER(20)	NOT NULL	Physical location of the optical power wave port.
PwrSrcIfIndex	NUMBER(20)	NOT NULL	Static CTM IfIndex of the wave port.
PwrSrcModuleType	NUMBER(8)	NOT NULL	Module type of the trunk or wave port.
PwrSrcModelType	NUMBER(8)	NOT NULL	Model type of the wave port.
PwrSrcObjectType	NUMBER(10)	NOT NULL	Object type of the wave port
PwrMonDirection	NUMBER(1)	NOT NULL	Direction associated with the power value entry. Values are: 1: Receive 2: Transmit 3: Not applicable
PwrMonLocation	NUMBER(1)	NOT NULL	Location where power is monitored. Values are: 1: Before adjustment 2: After adjustment 3: Not applicable
OpticalPower	VARCHAR(32)	NOT NULL	Received optical power.

1.2.179  ONS155xx_IF_Phy_Info_Table

The ONS155xx_IF_Phy_Info_Table (Table 1-176) contains physical information for ONS 15501, ONS 15530, and ONS 15540 interfaces from cmPhyIfTable of Metro-PHY-MIB.

Primary key: ONS155XX_IF_PHY_INFO_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-176   ONS155xx_IF_Phy_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
IFDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE interface; same as IFDBAccessId in MIB2_Interface_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
IfMode	NUMBER(1)	DEFAULT -1	Mode of operation for client interfaces. Values are: 1: mode2R 2: mode3R
IfProtocol	NUMBER(2)	DEFAULT -1	Protocol to be monitored on client interfaces. Values are: 1: Other 2: Unknown 3: Gigabit Ethernet 4: 10-Gigabit Ethernet 5: Fiber channel 6: FICON 7: ESCON 8: SONET 9: SDH 10: ISC compatibility 11: ISC peer 12: Sysplextimeretr 13: Sysplextimerclo 14: Fast Ethernet 15: FDDI 16: E1 17: T1 18: E3 19: T3 20: DVB 21: SDI
IfClockRate	NUMBER(10)	DEFAULT -1	Clock rate across the client side.
IfMonitor	NUMBER(1)	DEFAULT -1	Indicates whether monitoring is enabled. Values are: 1: True (enabled) 2: False (disabled)
IfLoopback	NUMBER(1)	DEFAULT -1	Loopback on client side interfaces. Values are: 1: No loop 2: Diagnostic loop 3: Line loop 4: Other loop
IfOFC	NUMBER(1)	DEFAULT -1	Indicates whether open fiber control is enabled. Values are: 1: True (enabled) 2: False (disabled)
IfLSC	NUMBER(1)	DEFAULT -1	Indicates whether laser safety control on trunk side interfaces is enabled. Values are: 1: True (enabled) 2: False (disabled)
IfFLC	NUMBER(1)	DEFAULT -1	Enable/disable forward laser control (FLC) on client/trunk interfaces. Values are: 1: True 2: False

1.2.180  ONS155xx_NE_Info_Table

The ONS155xx_NE_Info_Table (Table 1-177) contains additional ONS 15501, ONS 15530, and ONS 15540 information, mostly from the MIB II system group.

Primary key: ONS155XX_NE_INFO_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-177   ONS155xx_NE_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
HostName	VARCHAR2(64)	DEFAULT ' '	Domain Name System (DNS) host name.
GlobalId	VARCHAR2(64)	DEFAULT ' '	Global unique NE ID, such as chassis serial number.
SysObjectID	VARCHAR2(256)	DEFAULT ' '	System object ID.
SysContact	VARCHAR2(256)	DEFAULT ' '	System contact.
SysLocation	VARCHAR2(256)	DEFAULT ' '	System location.
SysDescr	VARCHAR2(256)	DEFAULT ' '	System description.
LastBootTime	DATE	—	Time stamp of the last restart.
LastSwitchoverTime	DATE	—	Time stamp of the last switchover.

1.2.181  ONS155xx_NE_Type_Table

The ONS155xx_NE_Type_Table (Table 1-178) provides the association between ONS 15501, ONS 15530, and ONS 15540 NE types and system object IDs.

Primary key: None

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-178   ONS155xx_NE_Type_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModelType	NUMBER(4)	NOT NULL	ID to access the table for an NE; same as ModelType in the Model_Type_Table.
SysObjectID	VARCHAR2(256)	NOT NULL	System object ID.
imageVersion	VARCHAR2(64)	—	System image version.
SMFFactory	VARCHAR2(256)	—	Service Manager Function (SMF) factory.
Description	VARCHAR2(256)	—	Description.

1.2.182  ONS155xx_Opt_Power_PM_Table

The ONS155xx_Opt_Power_PM_Table (Table 1-179) provides historical optical power information about the ONS 155xx.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS155XX_OPT_POWER_PM_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-179   ONS155xx_Opt_Power_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
Interval	NUMBER(1)	—	Interval of the PM bucket. Values are: 1: 15 minutes 2: 1-day
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 1: Invalid—Not enough elapsed time 2: Valid period 3: Partial PM (enabled/disabled in this period) 4: Invalid—PM disabled
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
ThresholdMask	NUMBER(20)	—	Threshold mask for the PM bucket in the interval. Values are: 1: Maximum power (second data column) 2: Minimum power (third data column) 4: Maximum ambient temperature (fifth data column) 5: Minimum ambient temperature (sixth data column) 7: Maximum laser temperature (eighth data column) 8: Minimum laser temperature (ninth data column) 10: Maximum bias current (eleventh data column) 11: Minimum bias current (twelfth data column)
MeanPower	NUMBER(10)	—	Mean/instance value of the optical power. The instance value is applicable only for ONS 15540 Extended Services Platform (ESP) Phase 0 and is taken from RxPower of Metro-Phy-MIB. For all other devices, only the mean value is applicable. Unit is in tenths of a decibel per milliwatt. The valid value range is -400 to 250. Value for non-applicable interfaces: -1,000,000: Not applicable
MaxPower	NUMBER(10)	—	Maximum value of the optical power. Unit is in tenths of a decibel per milliwatt. The valid value range is -400 to 250. Value for non-applicable interfaces: -1,000,000: Not applicable
MinPower	NUMBER(10)	—	Minimum value of the optical power. Unit is in tenths of a decibel per milliwatt. The valid value range is -400 to 250. Value for non-applicable interfaces : -1,000,000: Not applicable
MeanAmbTemp	NUMBER(10)	—	Mean value of the ambient temperature. Unit is in tenths of a degree Celsius. The valid value range is -500 to 850. Value for non-applicable interfaces: -1,000,000: Not applicable
MaxAmbTemp	NUMBER(10)	—	Maximum value of the ambient temperature. Unit is in tenths of a degree Celsius. The valid value range is -500 to 850. Value for non-applicable interfaces: -1,000,000: Not applicable
MinAmbTemp	NUMBER(10)	—	Minimum value of the ambient temperature. Unit is in tenths of a degree Celsius. The valid value range is -500 to 850. Value for non-applicable interfaces: -1,000,000: Not applicable
MeanLaserTemp	NUMBER(10)	—	Mean value of the laser temperature. Unit is in tenths of a degree Celsius. The valid value range is -500 to 850. Value for non-applicable interfaces: -1,000,000: Not applicable
MaxLaserTemp	NUMBER(10)	—	Maximum value of the laser temperature. Unit is in tenths of a degree Celsius. The valid value range is -500 to 850. Value for non-applicable interfaces: -1,000,000: Not applicable
MinLaserTemp	NUMBER(10)	—	Minimum value of the laser temperature. Unit is in tenths of a degree Celsius. The valid value range is -500 to 850. Value for non-applicable interfaces: -1,000,000: Not applicable
MeanBiasCurrent	NUMBER(10)	—	Mean value of the bias current. Unit is in hundreds of microamperes. The valid value range is 0 to 10000. Value for non-applicable interfaces: -1: Not applicable
MaxBiasCurrent	NUMBER(10)	—	Maximum value of the bias current. Unit is in hundreds of microamperes. The valid value range is 0 to 10000. Value for non-applicable interfaces: -1: Not applicable
MinBiasCurrent	NUMBER(10)	—	Minimum value of the bias current. Unit is in hundreds of microamperes. The valid value range is 0 to 10000. Value for non-applicable interfaces: -1: Not applicable
AvailableSecs	NUMBER(10)	—	Number of seconds in the interval when the PM data is valid. Values are 0 to 86400.
Direction	NUMBER(1)	NOT NULL	Direction in which the parameter is applicable. Values are: 1: Receive 2: Transmit 3: Not applicable
Location	NUMBER(1)	NOT NULL	Location of the amplifier or attenuator, if applicable. Values are: 1: Pre-adjustment 2: Post-adjustment 3: Not applicable
ModelType	NUMBER(5)	NOT NULL	Model type as defined by the object mapper.
ObjectType	NUMBER(10)	NOT NULL	Object type as defined by the object mapper.

1.2.183  ONS155xx_Path_Hop_Tbl

The ONS155xx_Path_Hop_Tbl (Table 1-180) provides the association between an ONS 15501, ONS 15530, or ONS 15540 path and its individual hops in terms of circuit span and circuit cross-connects.

Primary key: PATH_HOP_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-180   ONS155xx_Path_Hop_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
PATHDBID	NUMBER(10)	NOT NULL	Unique database ID for each unique path.
PATHHOPID	NUMBER(2)	NOT NULL	Hop number for this path.
PATHHOPTYPE	NUMBER(1)	—	Type of hop. Values are: 1: Cross-connect 2: Segment
PATHHOPDBID	NUMBER(10)	NOT NULL	Database ID associated with this hop, based on type.

1.2.184  ONS155xx_Path_Tbl

The ONS155xx_Path_Tbl (Table 1-181) provides all ONS 15501, ONS 15530, and ONS 15540 paths and their protection information.

Primary key: ONS155XX_PATH_TBL_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-181   ONS155xx_Path_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
PATHDBID	NUMBER(10)	NOT NULL	Unique database ID for each unique path.
PathSrcNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the path.
PathSrcPhysicalLoc	NUMBER(20)	—	Physical location of the source endpoint of the path.
PathSrcIfIndex	NUMBER(20)	—	Static CTM IfIndex of the source endpoint of the path.
PathSrcModuleType	NUMBER(8)	—	Module type of the source endpoint of the path.
PathSrcObjectType	NUMBER(8)	—	CTM object type of the source endpoint of the path.
PathSrcModelType	NUMBER(8)	—	CTM model type of the source endpoint of the path.
PathDestNodeId	NUMBER(10)	NOT NULL	Node ID of the destination node of the path.
PathDestPhysicalLoc	NUMBER(20)	—	Physical location of the destination endpoint of the path.
PathDestIfIndex	NUMBER(10)	—	Static CTM IfIndex of the destination endpoint of the path.
PathDestModuleType	NUMBER(8)	—	Module type of the destination endpoint of the path.
PathDestObjectType	NUMBER(8)	—	CTM object type of the destination endpoint of the path.
PathDestModelType	NUMBER(8)	—	CTM model type of the destination endpoint of the path.
PathStatus	NUMBER(1)	DEFAULT 1	Status of the path. Values are: 1: Active 2: Errored 3: Incomplete
IsWorking	NUMBER(1)	DEFAULT 1	Indicates whether the entire path is configured to be working. Values are: 1: True 2: False
IsActive	NUMBER(1)	DEFAULT 1	Indicates whether the entire path is configured to be active. Values are: 1: True 2: False
DownInterfaces	VARCHAR2(256)	DEFAULT NULL	List of all interfaces that are down in the path.
PathDescr	VARCHAR2(256)	DEFAULT NULL	Description associated with the path.
PathDestPwrMonNodeId	NUMBER(10)	DEFAULT -1	Node ID where the path destination power is monitored.
PathDestPwrMonPhysicalLoc	NUMBER(20)	DEFAULT -1	Physical location of the power monitor endpoint.
PathDestPwrMonIfIndex	NUMBER(20)	DEFAULT -1	Static CTM IfIndex of the power monitor endpoint.
PathDestPwrMonModuleType	NUMBER(8)	DEFAULT -1	Module type of the power monitor endpoint.
PathDestPwrMonObjectType	NUMBER(8)	DEFAULT -1	CTM object type of the power monitor endpoint.
PathDestPwrMonModelType	NUMBER(8)	—	CTM model type of the power monitor endpoint.

1.2.185  ONS155xx_Phy_PM_Table

The ONS155xx_Phy_PM_Table (Table 1-182) contains ONS 15501, ONS 15530, and ONS 15540 physical PM data.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS155XX_PHY_PM_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-182   ONS155xx_Phy_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
Interval	NUMBER(1)	NOT NULL	Interval of the PM bucket. Values are: 1: 15 minutes 2: 1-day
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 1: Invalid—Not enough elapsed time 2: Valid period 3: Partial PM (enabled/disabled in this period) 4: Invalid—PM disabled
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance when the PM bucket was collected.
ThresholdMask	NUMBER(20)	—	Threshold mask for the PM bucket in the interval. This does not apply to receive power. Values are: 0: RxCVRD (first data column) 1: RxHEC (second data column) 2: RxCRC (third data column) 3: TxEncapFarEndPktErrors (fourth data column)
RxCVRD	NUMBER(20)	—	Code violations and running disparity errors encountered in the receive direction. Applicable to non-SONET client and wave interfaces only. Null for others.
RxCRC	NUMBER(20)	—	Counter associated with cyclic redundancy check (CRC) errors. Applicable only for interfaces that provide CRC error monitoring. Null for others.
TxEncapFarEndPktErrors	NUMBER(20)	—	Counter associated with ingress error indications from the far end of an Ethernet network, where an ESCON stream is encapsulated in Ethernet packets. Applicable only for ESCON interfaces where Ethernet encapsulation is performed. Null for others.
ModelType	NUMBER(5)	NOT NULL	Model type as defined by the object mapper.
ObjectType	NUMBER(10)	NOT NULL	Object type as defined by the object mapper.

1.2.186  ONS155xx_SONET_Sec_PM_Table

The ONS155xx_SONET_Sec_PM_Table (Table 1-183) contains ONS 15530 and ONS 15540 SONET section layer PM data.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS155XX_SONET_SEC_PM_PK

Tablespace: ONS155XX_DATA_TABLESPACE

Table 1-183   ONS155xx_SONET_Sec_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
Interval	NUMBER(1)	—	Interval of the PM bucket. Values are: 1: 15 minutes 2: 1-day
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Status of the PM bucket. Values are: 1: Invalid—Not enough elapsed time 2: Valid period 3: Partial PM (enabled/disabled in this period) 4: Invalid—PM disabled
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance state when the PM bucket was collected.
ThresholdMask	NUMBER(20)	—	Threshold mask for the PM bucket in the interval. This applies to code violations only. Values are: 3: Code violations (fourth data column)
SevErrSecs	NUMBER(10)	—	Number of severely errored seconds encountered by SONET/SDH section in the interval.
SevErrFramingSecs	NUMBER(10)	—	Number of severely errored framing seconds encountered by SONET/SDH section in the interval.
ErrSecs	NUMBER(10)	—	Number of errored seconds encountered by SONET/SDH section in the interval.
CodeViolations	NUMBER(12)	—	Number of code violations encountered by SONET/SDH section in the interval.
ModelType	NUMBER(5)	NOT NULL	Model type as defined by the object mapper.
ObjectType	NUMBER(10)	NOT NULL	Object type as defined by the object mapper.

1.2.187  ONS15600_ENET_PM_Table

The ONS 15600_ENET_PM_Table (Table 1-184) is used for ENET PM data where the module type is an ENET line card.

Primary key: ONS15600_ENET_PM_PK

Tablespace: ONS15600_DATA_TABLESPACE

Table 1-184 ONS15600_ENET_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type for which the TM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
Timestamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Indicates status of the PM bucket. Valid values: 0: Valid period Other: Bit mask Value
inMaintenance	NUMBER(1)	—	Indicates whether NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the fifteen minute interval.
thresholdList	VARCHAR2(1024)	—	Threshold value for the PM bucket for the day.
IfInOctets	NUMBER(20)	DEFAULT -1	—
IfInUcastPkts	NUMBER(20)	DEFAULT -1	—
IfInMulticastPkts	NUMBER(20)	DEFAULT -1	—
IfInBroadcastPkts	NUMBER(20)	DEFAULT -1	—
IfInDiscards	NUMBER(20)	DEFAULT -1	—
ifInErrors	NUMBER(20)	DEFAULT -1	—
IfOutOctets	NUMBER(20)	DEFAULT -1	—
IfOutUcastPkts	NUMBER(20)	DEFAULT -1	—
IfOutMulticastPkts	NUMBER(20)	DEFAULT -1	—
IfOutBroadcastPkts	NUMBER(20)	DEFAULT -1	—
IfOutDiscards	NUMBER(20)	DEFAULT -1	—
Dot3StatsAlignmentErrors	NUMBER(20)	DEFAULT -1	—
Dot3StatsFCSErrors	NUMBER(20)	DEFAULT -1	—
Dot3StatsFrameTooLong	NUMBER(20)	DEFAULT -1	—
EtherStatsUndersizePkts	NUMBER(20)	DEFAULT -1	—
EtherStatsFragments	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts64Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts65to127Oct ets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts128to255Oc tets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts256to511Oc tets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts512to1023O ctets	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts1024to1518 Octets	NUMBER(20)	DEFAULT -1	—
EtherStatsBroadcastPkts	NUMBER(20)	DEFAULT -1	—
EtherStatsMulticastPkts	NUMBER(20)	DEFAULT -1	—
EtherStatsOversizePkts	NUMBER(20)	DEFAULT -1	—
EtherStatsJabbers	NUMBER(20)	DEFAULT -1	—
EtherStatsOctets	NUMBER(20)	DEFAULT -1	—
EtherStatsDropEvents	NUMBER(20)	DEFAULT -1	—
RxPauseFrames	NUMBER(20)	DEFAULT -1	—
TxPauseFrames	NUMBER(20)	DEFAULT -1	—
EtherStatsPkts	NUMBER(20)	DEFAULT -1	—
IfOutErrors	NUMBER(20)	DEFAULT -1	—
Dot3StatsInternalMacRxEr rors	NUMBER(20)	DEFAULT -1	—
Dot3StatsInternalMacTxEr rors	NUMBER(20)	DEFAULT -1	—
Dot3StatsSymbolErrors	NUMBER(20)	DEFAULT -1	—
RxEtherUtilizationStats	NUMBER(10)	DEFAULT -2	—
TxEtherUtilizationStats	NUMBER(10)	DEFAULT -2	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.188  ONS15600_POS_PM_Table

The ONS15600_POS_PM_Table (Table 1-185) is used for POS PM data where the module type is an ASAP line card.

Primary key: ONS15600_POS_PM_PK

Tablespace: ONS15600_DATA_TABLESPACE

Table 1-185 ONS15600_POS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type for which the TM refers.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
Timestamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Indicates status of the PM bucket. Valid values: 0: Valid period Other: Bit mask Value
inMaintenance	NUMBER(1)	—	Indicates whether NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the fifteen minute interval.
thresholdList	VARCHAR2(1024)	—	Threshold value for the PM bucket for the day.
hdlcInOctets	NUMBER(20)	DEFAULT -1	—
hdlcOutOctets	NUMBER(20)	DEFAULT -1	—
rxTotalPackets	NUMBER(20)	DEFAULT -1	—
txTotalPackets	NUMBER(20)	DEFAULT -1	—
hdlcRxAborts	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesBadCRC	NUMBER(20)	DEFAULT -1	—
GfpStatsRxFrame	NUMBER(20)	DEFAULT -1	—
GfpStatsTxFrame	NUMBER(20)	DEFAULT -1	—
GfpStatsRxOctets	NUMBER(20)	DEFAULT -1	—
GfpStatsTxOctets	NUMBER(20)	DEFAULT -1	—
GfpStatsRxCRCErrors	NUMBER(20)	DEFAULT -1	—
GfpStatsRxMbitErrors	NUMBER(20)	DEFAULT -1	—
GfpStatsRxSbitErrors	NUMBER(20)	DEFAULT -1	—
GfpStatsRxTypeInvalid	NUMBER(20)	DEFAULT -1	—
RxPktsDroppedInternalCongestion	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxShortPkts	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesTruncated	NUMBER(20)	DEFAULT -1	—
MediaIndStatsRxFramesTooLong	NUMBER(20)	DEFAULT -1	—
RxEtherUtilizationStats	NUMBER(10)	DEFAULT -2	—
TxEtherUtilizationStats	NUMBER(10)	DEFAULT -2	—
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.189  ONS15600_Sonet_Line_PM_Table

The ONS15600_Sonet_line_PM_Table (Table 1-186) contains ONS 15600 SONET line PM information. This table is used for OC-N PM data where the module type is an OC-N line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15600_LINE_PM_PK

Tablespace: ONS15600_DATA_TABLESPACE

Table 1-186   ONS15600_Sonet_Line_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	NOT NULL	Indicates the status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance state when the PM bucket was collected.
FifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
CodeViolations	NUMBER(10)	DEFAULT -1	Number of line code violations encountered by an OC-N interface in the interval. Valid for OC-3, OC-12, and EC1 cards.
ErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by an OC-N interface in the interval. Valid for OC-3, OC-12, and EC1 cards.
SevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by an OC-N interface in the interval. Valid for OC-3, OC-12, and EC1 cards.
UnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by an OC-N interface in the interval. Valid for OC-3, OC-12, and EC1 cards.
PpjcPdet	NUMBER(10)	DEFAULT -1	—
NpjcPdet	NUMBER(10)	DEFAULT -1	—
PpjcPgen	NUMBER(10)	DEFAULT -1	—
NpjcPgen	NUMBER(10)	DEFAULT -1	—
FcL	NUMBER(10)	—	Line failure count (FC-L) encountered by an OC-N interface in the interval. Valid for OC-48 and OC-192 cards. FC-L is a count of the number of near-end line failure events. A failure event begins when a line alarm indication signal (AIS-L) failure is declared or when a lower-layer, traffic-related, near-end failure is declared. This failure event ends when the failure is cleared. A failure event that begins in one period and ends in another period is counted only in the period where it begins.
Psc	NUMBER(10)	DEFAULT -1	Protection switching count (PSC) encountered by an OC-N interface in the interval. Valid for OC-48 and OC-192 cards. In a 1 + 1 protection scheme for a working card, PSC is a count of the number of times service switches from a working card to a protection card plus the number of times service switches back to the working card. For a protection card, PSC is a count of the number of times service switches to a working card from a protection card plus the number of times service switches back to the protection card. The PSC PM is only applicable if revertive line-level protection switching is used.
Psd	NUMBER(10)	DEFAULT -1	Protection switching duration (PSD) count encountered by an OC-N interface in the interval. Valid for OC-48 and OC-192 cards. PSD applies to the length of time, in seconds, that service is carried on another line. For a working line, PSD is a count of the number of seconds that service was carried on the protection line. For the protection line, PSD is a count of the seconds that the line was used to carry service. The PSD PM is only applicable if revertive line-level protection switching is used.
PjDiff	NUMBER(10)	DEFAULT -1	—
PjpSec	NUMBER(10)	DEFAULT -1	—
PjnSec	NUMBER(10)	DEFAULT -1	—
Pscs	NUMBER(10)	DEFAULT -1	Protection switch count-span.
Psds	NUMBER(10)	DEFAULT -1	Protection switch duration-span.
Pscw	NUMBER(10)	DEFAULT -1	Protection switch count-working.
Psdw	NUMBER(10)	DEFAULT -1	Protection switch duration-working.
Pscr	NUMBER(10)	DEFAULT -1	Protection switch count-ring.
Psdr	NUMBER(10)	DEFAULT -1	Protection switch duration-ring.
CodeViolationsFE	NUMBER(10)	DEFAULT -1	Number of line code violations encountered by an OC-N interface in the interval (far end). Valid for OC-48 and OC-192 cards.
ErrSecsFE	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by an OC-N interface in the interval (far end). Valid for OC-48 and OC-192 cards.
SevErrSecsFE	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by an OC-N interface in the interval (far end). Valid for OC-48 and OC-192 cards.
UnavailableSecsFE	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by an OC-N interface in the interval (far end). Valid for OC-48 and OC-192 cards.
FcLFE	NUMBER(10)	DEFAULT -1	Number of far-end line failure counts encountered by an OC-N interface in the interval. Valid for OC-48 and OC-192 cards.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.190  ONS15600_Sonet_Path_PM_Table

The ONS15600_Sonet_Path_PM_Table (Table 1-187) stores ONS 15600 SONET path PM information. This table is used for path PM data where the module type is a path line card.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15600_Path_LINE_PM_PK

Tablespace: ONS15600_DATA_TABLESPACE

Table 1-187   ONS15600_Sonet_Path_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Table index for the interface; same as IfStaticIndex in the Interface_Table.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
inMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
SonetPathCodeViolations	NUMBER(10)	DEFAULT -1	Number of LCVs encountered by a path interface in the interval. Valid for OC-48 and OC-192 cards.
SonetPathErrSecs	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a path interface in the interval. Valid for OC-48 and OC-192 cards.
SonetPathSevErrSecs	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a path interface in the interval. Valid for OC-48 and OC-192 cards.
SonetPathUnavailableSecs	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a path interface in the interval. Valid for OC-48 and OC-192 cards.
SonetPathFC	NUMBER(10)	DEFAULT -1	Failure count. Number of path failure events.
PpjcPdet	NUMBER(10)	DEFAULT -1	Positive Pointer Justification Count, Path Detected is a count of the positive pointer justifications detected on a particular path on an incoming signal.
NpjcPdet	NUMBER(10)	DEFAULT -1	Negative Pointer Justification Count, Path Detected is a count of the negative pointer justifications detected on a particular path on an incoming signal.
PpjcPgen	NUMBER(10)	DEFAULT -1	Positive Pointer Justification Count, Path Generated is a count of the positive pointer justifications generated for a particular path.
NpjcPgen	NUMBER(10)	DEFAULT -1	Negative Pointer Justification Count, Path Generated is a count of the negative pointer justifications generated for a particular path.
PjDiff	NUMBER(10)	DEFAULT -1	Displays the sum of the absolute values of differences between positive transmitted and received, and negative transmitted and received. The important metric on pointer justification is not the exact counts, but how many were absorbed.
PjpSec	NUMBER(10)	DEFAULT -1	Indicates the number of Pointer Justification Count Seconds detected on a particular path.
PjnSec	NUMBER(10)	DEFAULT -1	Indicates the number of Pointer Justification Count Seconds generated for a particular path.
SonetPathCodeViolationsFE	NUMBER(10)	DEFAULT -1	Number of code violations encountered by a path interface in the interval (far end). Valid for OC-48 and OC-192 cards (far end).
SonetPathErrSecsFE	NUMBER(10)	DEFAULT -1	Number of errored seconds encountered by a path interface in the interval (far end). Valid for OC-48 and OC-192 cards.
SonetPathSevErrSecsFE	NUMBER(10)	DEFAULT -1	Number of severely errored seconds encountered by a path interface in the interval (far end). Valid for OC-48 and OC-192 cards.
SonetUnavailableSecsFE	NUMBER(10)	DEFAULT -1	Number of unavailable seconds encountered by a path interface in the interval (far end). Valid for OC-48 and OC-192 cards.
SonetPathFCFE	NUMBER(10)	DEFAULT -1	Failure count. Number of path failure events (far end).
STSPathWidth	NUMBER(10)	DEFAULT -1	STS path width.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.191  ONS15600_Sonet_Sec_PM_Table

The ONS 15600_Sonet_Sec_PM_Table (Table 1-188) contains ONS 15600 SONET PM information data.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS15600_SONET_SEC_PM_PK

Tablespace: ONS15600_DATE_TABLESPACE

Table 1-188   ONS15600_Sonet_SEC_PM Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIfIndex	NUMBER(20)	NOT NULL	Interface index as defined by ObjectMapper.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Values are: 0: Valid period Other: Bit mask value (information about PM statistics)
InMaintenance	NUMBER(1)	—	Indicates whether or not the NE was In Maintenance state when the PM bucket was collected.
FifteenMinThresholdMask	NUMBER(10)	—	Threshold value for the PM bucket for the 15-minute interval.
thresholdList	VARCHAR2 (1024)	—	Threshold value for the PM bucket for the day.
SevErrFrameSecs	NUMBER(10)	DEFAULT -1	Number of section severely errored frame seconds encountered by an OC-N interface. Valid for OC-48 and OC-192 cards.
CodeViolations	NUMBER(10)	DEFAULT -1	Number of BIP errors detected at the session layer.
ErrSecs	NUMBER(10)	DEFAULT -1	Number of seconds when at least one section layer BIP error was detected or when an SEF LOS defect is present.
SevErrSecs	NUMBER(10)	DEFAULT -1	Number of seconds when more section layer BIP errors were detected.
IS24H	NUMBER(1)	NOT NULL	Specifies whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.192  ONS15600SDH_HO_PM_Table

The ONS15600SDH_HO_PM_Table (Table 1-189) contains information about the ONS 15600 SDH high-order PM parameters.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: None

Tablespace: ONS15600_DATA_TABLESPACE

Table 1-189   ONS15600SDH_HO_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Interval time stamp when the statistics were stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Valid values are: 0: Valid period Other: Bit mask value
inMaintenance	NUMBER(1)	—	Indicates whether the NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	—
thresholdList	VARCHAR2 (1024)	—	—
HpEb	NUMBER(20)	DEFAULT -1	Errored blocks.
HpEs	NUMBER(20)	DEFAULT -1	Errored seconds.
HpSes	NUMBER(20)	DEFAULT -1	Severely errored seconds.
HpUas	NUMBER(20)	DEFAULT -1	Unavailable seconds.
HpFc	NUMBER(20)	DEFAULT -1	Failure count.
HpBbe	NUMBER(20)	DEFAULT -1	Background block error.
HpEsr	NUMBER(20)	DEFAULT -1	Errored seconds ratio.
HpSesr	NUMBER(20)	DEFAULT -1	Severely errored seconds ratio.
HpBber	NUMBER(20)	DEFAULT -1	Background block error ratio.
HpPjpIn	NUMBER(20)	DEFAULT -1	Positive pointer justification-In.
HpPjpOut	NUMBER(20)	DEFAULT -1	Positive pointer justification-Out.
HpPjnIn	NUMBER(20)	DEFAULT -1	Negative pointer justification-In.
HpPjnOut	NUMBER(20)	DEFAULT -1	Negative pointer justification-Out.
FeHpEb	NUMBER(20)	DEFAULT -1	Errored blocks (far end).
FeHpEs	NUMBER(20)	DEFAULT -1	Errored seconds (far end).
FeHpSes	NUMBER(20)	DEFAULT -1	Severely errored seconds (far end).
FeHpUas	NUMBER(20)	DEFAULT -1	Unavailable seconds (far end).
FeHpFc	NUMBER(20)	DEFAULT -1	Failure count (far end).
FeHpBbe	NUMBER(20)	DEFAULT -1	Background block error (far end).
FeHpEsr	NUMBER(20)	DEFAULT -1	Errored seconds ratio (far end).
FeHpSesr	NUMBER(20)	DEFAULT -1	Severely errored seconds ratio (far end).
FeHpBber	NUMBER(20)	DEFAULT -1	Background block error ratio (far end).
StsPathWidth	NUMBER(4)	DEFAULT -1	STS size. Valid for OC-N/STM-N cards. Possible values are: 1: VC4 2: VC4-2c 3: VC4-3c 4: VC4-4c 8: VC4-8c 16: VC4-16c 64: VC4-64c
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.193  ONS15600SDH_MS_PM_Table

The ONS15600SDH_MS_PM_Table (Table 1-190) contains information about the ONS 15600 SDH multiplex section PM parameters.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: None

Tablespace: ONS15600_DATA_TABLESPACE

Table 1-190   ONS15600SDH_MS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Interval time stamp when the statistics were stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Valid values are: 0: Valid period Other: Bit mask value
inMaintenance	NUMBER(1)	—	Indicates whether the NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresho ldMask	NUMBER(10)	—	—
thresholdList	VARCHAR2 (1024)	—	—
MsEb	NUMBER(20)	DEFAULT -1	Errored blocks-multiplex section.
MsEs	NUMBER(20)	DEFAULT -1	Errored seconds-multiplex section.
MsSes	NUMBER(20)	DEFAULT -1	Severely errored seconds-multiplex section.
MsUas	NUMBER(20)	DEFAULT -1	Unavailable seconds-multiplex section.
MsFc	NUMBER(20)	DEFAULT -1	Failure count-multiplex section.
MsBbe	NUMBER(20)	DEFAULT -1	Background block error-multiplex section.
MsPsc	NUMBER(20)	DEFAULT -1	Protection switching count-multiplex section.
MsPsd	NUMBER(20)	DEFAULT -1	Protection switching duration-multiplex section.
MSPSCS	NUMBER(20)	DEFAULT -1	Protection switching count-span, multiplex section.
MSPSDS	NUMBER(20)	DEFAULT -1	Protection switching duration-span, multiplex section.
MSPSCW	NUMBER(20)	DEFAULT -1	Protection switching count-working, multiplex section.
MSPSDW	NUMBER(20)	DEFAULT -1	Protection switching duration-working, multiplex section.
MSPSCR	NUMBER(20)	DEFAULT -1	Protection switching count-ring, multiplex section.
MSPSDR	NUMBER(20)	DEFAULT -1	Protection switching duration-ring, multiplex section.
FeMsEb	NUMBER(20)	DEFAULT -1	Errored blocks-multiplex section (far end).
FeMsEs	NUMBER(20)	DEFAULT -1	Errored seconds-multiplex section (far end).
FeMsSes	NUMBER(20)	DEFAULT -1	Severely errored seconds-multiplex section (far end).
FeMsUas	NUMBER(20)	DEFAULT -1	Unavailable seconds-multiplex section (far end).
FeMsFc	NUMBER(20)	DEFAULT -1	Failure count-multiplex section (far end).
FeMsBbe	NUMBER(20)	DEFAULT -1	Background block error-multiplex section (far end).
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.194  ONS15600SDH_RS_PM_Table

The ONS15600SDH_RS_PM_Table (Table 1-191) contains information about the ONS 15600 regeneration section PM parameters.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: None

Tablespace: ONS15600_DATA_TABLESPACE

Table 1-191   ONS15600SDH_RS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
ModuleType	NUMBER(4)	NOT NULL	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
NEIFIndex	NUMBER(20)	NOT NULL	Table index for the interface.
TimeStamp	DATE	NOT NULL	Interval time stamp when the statistics were stored.
NEIfPMStatus	NUMBER(20)	DEFAULT 0	Status of the PM bucket. Valid values are: 0: Valid period Other: Bit mask value
inMaintenance	NUMBER(1)	—	Indicates whether the NE was In Maintenance state when the PM bucket was collected.
fifteenMinThresholdMask	NUMBER(10)	—	—
thresholdList	VARCHAR2 (1024)	—	—
RsEb	NUMBER(20)	DEFAULT -1	Errored blocks-regeneration section.
RsEs	NUMBER(20)	DEFAULT -1	Errored seconds-regeneration section.
RsSes	NUMBER(20)	DEFAULT -1	Severely errored seconds-regeneration section.
RsSefs	NUMBER(20)	DEFAULT -1	Severely errored framing seconds-regeneration section.
RsBbe	NUMBER(20)	DEFAULT -1	Background block error-regeneration section.
IS24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.
InvalidityList	VARCHAR2(1024)	—	Invalidity list for PM data.

1.2.195  ONS158xx_Amplifier_PM_Table

The ONS158xx_Amplifier_PM_Table (Table 1-192) stores values from ONS 158xx amplifiers.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_AMPLIFIER_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-192   ONS158xx_Amplifier_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
LASTEMP_1	VARCHAR2(40)	—	Laser temperature 1.
LASTEMP_2	VARCHAR2(40)	—	Laser temperature 2.
LASCURR_1	VARCHAR2(40)	—	Laser current 1.
LASCURR_2	VARCHAR2(40)	—	Laser current 2.
INPPWR_1	VARCHAR2(40)	—	Input power 1.
INPPWR_2	VARCHAR2(40)	—	Input power 2.
OUTPWR_1	VARCHAR2(40)	—	Output power 1.
OUTPWR_2	VARCHAR2(40)	—	Output power 2.
LASPWR_1	VARCHAR2(40)	—	Laser power 1.
LASPWR_2	VARCHAR2(40)	—	Laser power 2.
OUTPWRRED_1	VARCHAR2(40)	—	Output power-red band.
OUTPWRBLUE_1	VARCHAR2(40)	—	Output power-blue band.
EPPOWER_1	VARCHAR2(40)	—	External pump power 1.
EPPOWER_2	VARCHAR2(40)	—	External pump power 2.
FIBERTEMP_1	VARCHAR2(40)	—	Fiber temperature 1.
OFFSET_1	VARCHAR2(40)	—	Output power offset 1.
EPACTIVE_1	VARCHAR2(40)	—	External pump status 1.
VOA_1	VARCHAR2(40)	—	Variable optical attenuation 1.
VOAOFFSET_1	VARCHAR2(40)	—	Variable optical attenuation offset 1.
PUMPPWR_1	VARCHAR2(40)	—	Pump power 1.
PUMPPWR_2	VARCHAR2(40)	—	Pump power 2.
TRAMPWR_1	VARCHAR2(40)	—	Raman pump power 1.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.196  ONS158xx_BCS_PM_Table

The ONS158xx_BCS_PM_Table (Table 1-193) stores PM values for the ONS 15808 band combiner and splitter (BCS) modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_BCS_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-193   ONS158xx_BCS_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (slot and port).
TimeStamp	DATE	NOT NULL	Interval time stamp for which the set of statistics is gathered.
EPPOWER_1	VARCHAR2(40)	—	External pump power 1.
EPPOWER_2	VARCHAR2(40)	—	External pump power 2.
TOTRAMPWR_1	VARCHAR2(40)	—	Total external pump power 1.
RAMINLOSS_1	VARCHAR2(40)	—	External pump 1 insertion loss.
RAMINLOSS_2	VARCHAR2(40)	—	External pump 2 insertion loss.
INPPWR_1	VARCHAR2(40)	—	Input power 1.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.197  ONS158xx_CMP_PM_Table

The ONS158xx_CMP_PM_Table (Table 1-194) stores PM values for ONS 15808 Control and Monitoring Processor (CMP) modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_CMP_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-194   ONS158xx_CMP_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (slot and port).
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
HDFREEMEM_1	VARCHAR2(40)	—	Amount of free hard drive memory.
HDAVAILMEM_1	VARCHAR2(40)	—	Percentage of hard drive memory available.
FREERAM_1	VARCHAR2(40)	—	Amount of free RAM available.
AVAILRAM_1	VARCHAR2(40)	—	Percentage of RAM available.
BIGGESTBLK_1	VARCHAR2(40)	—	Size of the RAM block.
LASTALARMH_1	VARCHAR2(40)	—	Number of alarms generated in the previous whole hour.
ALARMFWD24_1	VARCHAR2(40)	—	Number of alarms generated in the current hour.
ALPEAK24_1	VARCHAR2(40)	—	Peak number of alarms at any given time.
ALAVG24_1	VARCHAR2(40)	—	Average number of alarms per second in a 24-hour period.
ALAVG60S_1	VARCHAR2(40)	—	Average number of alarms per second in a 60-second period.
LOGAVAIL_1	VARCHAR2(40)	—	Percentage of free log space available.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.198  ONS158xx_IOC_W_PM_Table

The ONS158xx_IOC_W_PM_Table (Table 1-195) stores PM values for ONS 15800 and ONS 15801 Input/Output cards (IOC-Ws).

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: PL_ONS158XX_IOC_W_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-195   ONS158xx_IOC_W_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (rack, shelf, and slot).
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
GENANAIN_1	VARCHAR2(40)	—	Generic analog input 1.
GENANAIN_2	VARCHAR2(40)	—	Generic analog input 2.
GENANAIN_3	VARCHAR2(40)	—	Generic analog input 3.
GENANAIN_4	VARCHAR2(40)	—	Generic analog input 4.
GENANAIN_5	VARCHAR2(40)	—	Generic analog input 5.
GENANAIN_6	VARCHAR2(40)	—	Generic analog input 6.
GENANAIN_7	VARCHAR2(40)	—	Generic analog input 7.
GENANAIN_8	VARCHAR2(40)	—	Generic analog input 8.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.199  ONS158xx_LAC_Active_User_Table

The ONS158xx_LAC_Active_User_Table (Table 1-196) stores information about ONS 15800, ONS 15801, and ONS 15808 active local access control (LAC) users.

Primary key: ONS158XX_LAC_USER_A_TABLE_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-196   ONS158xx_LAC_Active_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NEDBAccessID in the NE_Info_Table.
UserType	VARCHAR2(40)	NOT NULL	Type of user.
SessionId	NUMBER(10)	NOT NULL	Session ID.
IpAddress	VARCHAR2(40)	NOT NULL	IP address.
UserName	VARCHAR2(40)	NOT NULL	Username.
UserProfile	VARCHAR2(40)	NOT NULL	User profile. Values are: 1: TL1 system administrator 2: TL1 complete permission 3: TL1 read-only user 4: TL1 partial permission 5: TL1 simple permission 31: LCI superuser 32: LCI network administrator 33: LCI read/write user 34: LCI read-only user

1.2.200  ONS158xx_LAC_Log_Status_Table

The ONS158xx_LAC_Log_Status_Table (Table 1-197) stores LAC log status information for all ONS 15800, ONS 15801, and ONS 15808 NEs.

Primary key: ONS158XX_LAC_LOG_S_TABLE_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-197   ONS158xx_LAC_Log_Status_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NEDBAccessID in the NE_Info_Table.
LogStatus	VARCHAR2(40)	NOT NULL	Indicates whether the security log is enabled or disabled on the NE.
LogName	VARCHAR2(40)	NOT NULL	Log name.
LastUpdate	DATE	—	Last time the CTM user requested information from the security log on the NE.

1.2.201  ONS158xx_LAC_Log_Table

The ONS 158xx_LAC_Log_Table (Table 1-198) stores LAC log information for all ONS 15800, ONS 15801, and ONS 15808 NEs.

Primary key: None

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-198 ONS158xx_LAC_Log_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NEDBAccessID in the NE_Info_Table.
UserName	VARCHAR2(40)	NOT NULL	Username.
SessionID	VARCHAR2(40)	NOT NULL	—
UserProfile	VARCHAR2(40)	NOT NULL	User profiles. Valid values: 1: TL1 system administrator 2: TL1 complete permission 3: TL1 read-only user 4: TL1 partial permission 5: TL1 simple permission 31: LCI superuser 32: LCI network administrator 33: LCI read and write user 34: LCI read-only user
DateTime	Date	NOT NULL	—
ModuleName	VARCHAR2(40)	NOT NULL	—
Location	VARCHAR2(40)	NOT NULL	—
Operation	VARCHAR2(300)	NOT NULL	—
Result	VARCHAR2(40)	NOT NULL	—

1.2.202  ONS158xx_LAC_Profile_Table

The ONS158xx_LAC_Profile_Table (Table 1-199) stores valid NE user profiles for ONS 15800, ONS 15801, and ONS 15808 NEs.

Primary key: ONS158XX_LAC_P_TABLE_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-199   ONS158xx_LAC_Profile_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
Profile	VARCHAR2(40)	NOT NULL	Unique identifier for the NE user profile. Values are: 1: TL1 system administrator 2: TL1 complete permission 3: TL1 read-only user 4: TL1 partial permission 5: TL1 simple permission 31: LCI superuser 32: LCI network administrator 33: LCI read/write user 34: LCI read-only user
Description	VARCHAR2(100)	NOT NULL	Description of the user profile.

1.2.203  ONS158xx_LAC_User_Table

The ONS158xx_LAC_User_Table (Table 1-200) stores ONS 15800, ONS 15801, and ONS 15808 LAC user information.

Primary key: ONS158XX_LAC_USER_TABLE_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-200   ONS158xx_LAC_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NEDBAccessID in the NE_Info_Table.
UserType	VARCHAR2(40)	NOT NULL	Type of user.
UserName	VARCHAR2(40)	NOT NULL	Username of the TL1 or LCI user who performed the operation on the NE.
UserProfile	VARCHAR2(40)	NOT NULL	Values are: 1: TL1 system administrator 2: TL1 complete permission 3: TL1 read-only user 4: TL1 partial permission 5: TL1 simple permission 31: LCI superuser 32: LCI network administrator 33: LCI read/write user 34: LCI read-only user

1.2.204  ONS158xx_LSM_PM_Table

The ONS158xx_LSM_PM_Table (Table 1-201) stores analog values from Line Service Modem (LSM-W) modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_LSM_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-201   ONS158xx_LSM_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
ELASTEMP_1	VARCHAR2(40)	—	East laser power temperature 1.
WLASTEMP_2	VARCHAR2(40)	—	West laser power temperature 2.
ELASCURR_1	VARCHAR2(40)	—	East laser current 1.
WLASCURR_2	VARCHAR2(40)	—	West laser current 2.
ELASOUTPWR_1	VARCHAR2(40)	—	East output power 1.
WLASOUTPWR_2	VARCHAR2(40)	—	West output power 2.
COLLNUMBER_1	VARCHAR2(40)	—	Number of collisions.
BYTENUMBER_1	VARCHAR2(40)	—	Number of transmitted bytes.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.205  ONS158xx_NE_IP_Table

The ONS158xx_NE_IP_Table (Table 1-202) stores the primary and secondary IP address associated with each managed ONS 15800, ONS 15801, and ONS 15808 NE.

Primary key: PL_ONS158XX_NE_IP_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-202   ONS158xx_NE_IP_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in NE_INFO_TABLE.
FIRST_IP	NUMBER(10)	UNIQUE NOT NULL	First IP address of the NE, assumed to be unique across the domains. The GUI and server convert an IP address to a number before it is stored in the database.
SECOND_IP	NUMBER(10)	NOT NULL	Second IP address of the NE, assumed to be unique across the domains. GUI and server convert an IP address to a number before it is stored in the database.

1.2.206  ONS158xx_OAD_PM_Table

The ONS158xx_OAD_PM_Table (Table 1-203) stores PM values for ONS 15808 Optical Add/Drop-8 channel-C band (OAD-8-C) modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_OAD_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-203   ONS158xx_OAD_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (slot and port).
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
INPPWREXP_1	VARCHAR2(40)	—	Input power express channels 1.
INPPWRADD_1	VARCHAR2(40)	—	Input power add channels 1.
EXPAINLOSS_1	VARCHAR2(40)	—	Add express channels insertion loss 1.
EXPDINLOSS_1	VARCHAR2(40)	—	Drop express channels insertion loss 1.
ADDINLOSS_1	VARCHAR2(40)	—	Add channels insertion loss 1.
DROPINLOSS_1	VARCHAR2(40)	—	Drop channels insertion loss 1.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.207  ONS158xx_OADM_PM_Table

The ONS158xx_OADM_PM_Table (Table 1-204) stores PM values for ONS 15800 and ONS 15801 Optical Add/Drop Multiplexer-Passive-4 channels (OADM-P4) modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_OADM_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-204   ONS158xx_OADM_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (slot and port).
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
LASTEMP_1	VARCHAR2(40)	—	Operating temperature 1.
LASTEMP_2	VARCHAR2(40)	—	Operating temperature 2.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

 

1.2.208  ONS158xx_OSU_PM_Table

The ONS158xx_OSU_PM_Table (Table 1-205) stores PM values for ONS 15800, ONS 15801, and ONS 15808 Optical Switch Units (OSUs).

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_OSU_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-205   ONS158xx_OSU_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (slot and port).
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
INPPWRTX_1	VARCHAR2(40)	—	Input power from client transmitter 1.
OUTPWRRX_1	VARCHAR2(40)	—	Output power client receive 1.
INPPWRW_1	VARCHAR2(40)	—	Input power working line 1.
INPPWRP_1	VARCHAR2(40)	—	Input power protection line 1.
SINSLOSSRX_1	VARCHAR2(40)	—	Optical switch insertion loss.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.209  ONS158xx_OTS_PTP_Table

The ONS158xx_OTS_PTP_Table (Table 1-206) contains information about the ONS 158xx PTP table.

Primary key: ONS158xx_PTP_S_Table_PK

Tablespace: ONS158xx_DATA_TABLESPACE

Table 1-206   ONS158xx_OTS_PTP_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModelType	NUMBER(4)	NOT NULL	Type of model.
NeConfigMode	NUMBER(2)	NOT NULL	Configuration mode of the NE.
SourceSynk	NUMBER(4)	NOT NULL	—
ModuleType	NUMBER(8)	NOT NULL	Module identifier.

1.2.210  ONS158xx_PM_ACT_MOD_Table

The ONS158xx_PM_ACT_MOD_Table (Table 1-207) stores the ONS 15800, ONS 15801, and ONS 15808 NE modules on which PM is enabled. If PM is enabled on the entire NE, the list of racks is substituted for the list of modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_PM_ACT_MOD_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-207   ONS158xx_PM_ACT_MOD_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_Info_Table.
ModuleType	NUMBER(4)	NOT NULL	Module identifier.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (rack, shelf, and slot).
Current_state	NUMBER(1)	NOT NULL	—
Previous_state	NUMBER(1)	NOT NULL	—

1.2.211  ONS158xx_PTPType_Table

The ONS158xx_PTPType_Table (Table 1-208) is used for link management.

Primary key: ONS158XX_PTPTYPE_TABLE_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-208   ONS158xx_PTPType_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
PtpTypeName	VARCHAR2(64)	NOT NULL	Indicates whether the PTP is a source or a sync PTP.
PtpTypeValue	NUMBER(4)	NOT NULL	Identifies the PTP source or sync. Values are: 1: Source 2: Sync

1.2.212  ONS158xx_SCF_PM_Table

The ONS158xx_SCF_PM_Table (Table 1-209) stores analog values from the ONS 15800 and ONS 15801 Subrack Common Functions (SCF) module.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_SCF_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-209   ONS158xx_SCF_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
FANCURRENT_1	VARCHAR2(40)	—	Fan operating current 1.
FANCURRENT_2	VARCHAR2(40)	—	Fan operating current 2.
FANCURRENT_3	VARCHAR2(40)	—	Fan operating current 3.
FANCURRENT_4	VARCHAR2(40)	—	Fan operating current 4.
DCCONV_1	VARCHAR2(40)	—	Fan power supply voltage 1.
BATCTRL_1	VARCHAR2(40)	—	Backplane power supply voltage.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.213  ONS158xx_TimeStamp_PM_Table

The ONS158xx_TimeStamp_PM_Table (Table 1-210) contains time stamp information for ONS 15800, ONS 15801, and ONS 15808 NEs.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_TS_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-210   ONS158xx_TimeStamp_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.214  ONS158xx_Transponder_PM_Table

The ONS158xx_Transponder_PM_Table (Table 1-211) stores analog values from ONS 15800 and ONS 15801 Line Extender Modules-Externally Modulated (LEM-EM) and Wavelength Converter Modules-Externally Modulated (WCM-EM). It also stores values for Receive Transponder-Directly Modulated (RXT-DM) modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_TRANSPONDER_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-211   ONS158xx_Transponder_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location.
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
LASTEMP_1	VARCHAR2(40)	—	Laser temperature 1.
LASCURR_1	VARCHAR2(40)	—	Laser current 1.
INPPWR_1	VARCHAR2(40)	—	Input power 1.
OUTPWR_1	VARCHAR2(40)	—	Output power 1.
LASPWR_1	VARCHAR2(40)	—	Laser power 1.
B1ES15M_1	VARCHAR2(40)	—	B1 errored seconds at 15 minutes.
B1SES15M_1	VARCHAR2(40)	—	B1 severely errored seconds at 15 minutes.
B1BBE15M_1	VARCHAR2(40)	—	B1 background block errors at 15 minutes.
B1BER15M_1	VARCHAR2(40)	—	B1 bit error rate at 15 minutes.
B1UT15M_1	VARCHAR2(40)	—	B1 unavailable time at 15 minutes.
B1ES24H_1	VARCHAR2(40)	—	B1 errored seconds at 24 hours.
B1SES24H_1	VARCHAR2(40)	—	B1 severely errored seconds at 24 hours.
B1BBE24H_1	VARCHAR2(40)	—	B1 background block errors at 24 hours.
B1BER24H_1	VARCHAR2(40)	—	B1 bit error rate at 24 hours.
B1UT24H_1	VARCHAR2(40)	—	B1 unavailable time at 24 hours.
FECES15M_1	VARCHAR2(40)	—	Forward error correction (FEC) errored seconds at 15 minutes.
FECSES15M_1	VARCHAR2(40)	—	FEC severely errored seconds at 15 minutes.
FECBBE15M_1	VARCHAR2(40)	—	FEC background block errors at 15 minutes.
FECUT15M_1	VARCHAR2(40)	—	FEC unavailable time at 15 minutes.
FECECR15M_1	VARCHAR2(40)	—	FEC error corrected rate at 15 minutes.
FECUCR15M_1	VARCHAR2(40)	—	FEC uncorrected code words rate at 15 minutes.
FECES24H_1	VARCHAR2(40)	—	FEC errored seconds at 24 hours.
FECSES24H_1	VARCHAR2(40)	—	FEC severely errored seconds at 24 hours.
FECBBE24H_1	VARCHAR2(40)	—	FEC background block errors at 24 hours.
FECUT24H_1	VARCHAR2(40)	—	FEC unavailable time at 24 hours.
FECECR24H_1	VARCHAR2(40)	—	FEC error corrected rate at 24 hours.
FECUCR24H_1	VARCHAR2(40)	—	FEC uncorrected code words at 24 hours.
INPPWR_T_1	VARCHAR2(40)	—	—
OUTPWR_T_1	VARCHAR2(40)	—	—
INTOTPK15M_T_1	VARCHAR2(40)	—	—
INPKOK15M_T_1	VARCHAR2(40)	—	—
INRUNTS15M_T_1	VARCHAR2(40)	—	—
INGNTS15M_T_1	VARCHAR2(40)	—	—
INTOTER15M_T_1	VARCHAR2(40)	—	—
INCRC15M_T_1	VARCHAR2(40)	—	—
INEB15M_T_1	VARCHAR2(40)	—	—
OVSZPK15M_T_1	VARCHAR2(40)	—	—
INPPWR_R_1	VARCHAR2(40)	—	—
OUTPWR_R_1	VARCHAR2(40)	—	—
OUTPK15M_R_1	VARCHAR2(40)	—	—
OUTPSPK15M_R_1	VARCHAR2(40)	—	—
INTOTPK24H_T_1	VARCHAR2(40)	—	—
INPKOK24H_T_1	VARCHAR2(40)	—	—
INRUNTS24H_T_1	VARCHAR2(40)	—	—
INGNTS24H_T_1	VARCHAR2(40)	—	—
INTOTER24H_T_1	VARCHAR2(40)	—	—
INCRC24H_T_1	VARCHAR2(40)	—	—
INEB24H_T_1	VARCHAR2(40)	—	—
OVSZPK24H_T_1	VARCHAR2(40)	—	—
OUTPK24H_R_1	VARCHAR2(40)	—	—
OUTPSPK24H_R_1	VARCHAR2(40)	—	—
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: True (24 hour) 0: False (15-minute)

1.2.215  ONS158xx_WD_PM_Table

The ONS158xx_WD_PM_Table (Table 1-212) stores PM values for the ONS 15800 and ONS 15801 wavelength demultiplexer modules (8WD-B, 24WD-LLR, 24WD-R, and 32WD-IR).

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_WD_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-212   ONS158xx_WD_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (slot and port).
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
AWG_TEMP_1	VARCHAR2(40)	—	Operating temperature 1.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.216  ONS158xx_WD_RX_PM_Table

The ONS158xx_WD_RX_PM_Table (Table 1-213) stores PM values for the ONS 15808 wavelength demultiplexer receiver (WD-RX) modules.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: ONS158XX_WD_RX_PM_PK

Tablespace: ONS158XX_DATA_TABLESPACE

Table 1-213   ONS158xx_WD_RX_PM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE; same as NEDBAccessID in the NE_INFO_TABLE.
ModuleType	NUMBER(4)	NOT NULL	Module type to which this PM pertains.
PhysicalLoc	NUMBER(20)	NOT NULL	Physical location (slot and port).
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.
AWG_TEMP_1	VARCHAR2(40)	—	Operating temperature 1.
INPPWR_1	VARCHAR2(40)	—	Input power 1.
is24H	NUMBER(1)	NOT NULL	Indicates whether the PM data is collected in 24-hour or 15-minute increments. Values are: 1: 24 hour 0: 15-minute

1.2.217  Operation_Permissions_Table

The Operation_Permission_Table (Table 1-214) contains information about the privilege level for each CTM operation.

Primary key: Operation_Permission_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-214 Operation_Permissions_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserTypeID	NUMBER(4)	NOT NULL	Unique ID for each user.
OperationID	NUMBER(4)	NOT NULL	Unique ID for each operation.
Permission	NUMBER(1)	DEFAULT 2 NOT NULL	Permission for the user type for that operation. Values are: 0: No access 1: Read only 2: Read/Write

1.2.218  Operations_Table

The Operations_Table (Table 1-215) contains information about the different CTM operations.

Primary key: Operations_Table_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-215   Operations_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
OperationID	NUMBER(4)	NOT NULL	Unique ID for each operation. Valid values are: 0: ADD_DELETE_NE_OR_GROUP 1: AUDIT_ERROR_LOG 2: AUDIT_TRAIL_TABLE 4: CIRCUIT_TABLE 5: CLI_INTERFACE 6: LOGGED_IN_CTM_USERS 7: CONTROL_PANEL 8: CTC_UPGRADE_TABLE 9: CTM_USER_PROFILES 10: CTM_USERS 11: EDIT_NE_OR_GROUP_PROPERTIES 12: EQUIPMENT_INVENTORY 14: FAULT_MGMT 15: JOB_MONITOR 16: LAUNCH_CRAFT_INTERFACE 17: LINK_TABLE 18: MANAGE_VLANS 19: NE_EXPLORER 20: NE_LOGGED_IN_USERS_TABLE 22: NE_SOFTWARE_TABLE 23: NE_SW_MEM_MGMT 24: NE_USER_ACCESS_ADMIN 26: ONS155XX_CM_DISCOVERY 27: ONS155XX_FLASH_FILES_TABLE 28: ONS155XX_SNMP_TABLE 29: ONS1580X_DOMAIN_NE_TABLE 30: ONS1580X_NE_USER_LOG 31: PERFORMANCE
OperationID (continued)	NUMBER(4)	NOT NULL	32: SUBNETWORK_EXPLORER 33: SUPPORTED_NE_TABLE 34: TL1_INTERFACE 35: TOPOLOGY_MODIFICATION 36: EDIT_DOMAIN_NODE_PROPERTIES 37: NE_SECURITY 38: USER_PREFERENCES 39: L2SERVICES_TABLE 40: L2TOPOLOGY_TABLE 41: LOGGED_IN_GWTL1_USERS 42: GWTL1_USERS 43: BLSR_TABLE 44: CREATE_BLSR 45: ROLL_CM_TABLE 46: CREATE_MSSP_RING 47: MSSP_RING_TABLE 48: NE_EXPLORER_ADMINISTRATION 49: CTC_USER_PROFILES 50: SAVE_MAP_AS_DEFAULT 51: SHOW_CTM_EMS_ALARMS_EVENTS 52: NE_SNMP 53: NE_STATIC_ROUTES 54: NE_OSPF 55: NE_OSPF_AREA_RANGES 56: NE_OSPF_VIRTUAL_LINK 57: NE_FIREWALL 58: NE_IP_ADDRESS 59: NE_RIP 60: NE_DCC 61: SNTP_CONFIGURATION 62: L2DROPPORTS_TABLE 63: DWDM_RING_TABLE 64: MANAGE_IOS_USERS 65: L1_CIRCUIT_MGMT 66: DATA_ADMIN_FUNCTIONS
OperationID (continued)	NUMBER(4)	NOT NULL	67: DATA_SERVICE_MGMT_FUNCTIONS 68: PROFILE_MGMT 69: L2_SERVICE_PROVISIONING 70: MERGE_CIRCUIT 71: NE_PROTECTION 72: COMPARE_CONFIG_FILES
OperationName	VARCHAR2(65)	NOT NULL	Name of the operation.
Category	VARCHAR2(65)	—	Category name corresponding to operation.
Description	VARCHAR2(256)	—	Description of operation.
AllowedPermissions	NUMBER(1)	DEFAULT 2	Permission that is allowed for the user type. Values are: 0: No Read 1: No Write 2: All 3: No Access 4: None
Warning	VARCHAR2 (256)	—	Warnings associated with dependencies on the permissions for this operation.

1.2.219  OSS_Active_User_Table

The OSS_Active_User_Table (Table 1-216) contains information about the OSS active users.

Primary key: OSS_ACTIVE_USER_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-216 OSS_Active_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
SessionID	NUMBER(10)	NOT NULL UNIQUE	Session ID.
OSSName	VARCHAR2(128)	NOT NULL	OSS name.
IPAddress	NUMBER(10)	NOT NULL	IP address.
TimeOfConnection	DATE	—	Date and time when session was started.
ListenerModeFlag	NUMBER(1)	DEFAULT 1	Indicates whether autonomous message should be forwarded to the OSS connection. Valid values are: 0: DO_NOT_FORWARD 1: FORWARD
DomainMgrFlag	NUMBER(1)	DEFAULT 0	Indicates whether the OSS can use the Domain Manager capabilities of CTM. Valid values are: 0: No 1: Yes

1.2.220  OSS_AID_ENUM_Table

The OSS_AID_ENUM_Table (Table 1-217) contains information about the access identifiers (AIDs) that CTM GateWay/TL1 supports for autonomous message filtering. CTM GateWay/TL1 filters autonomous messages based on the AID values in this table.

Primary key: OSS_AID_ENUM_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-217 OSS_AID_ENUM_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
AIDId	NUMBER(4)	NOT NULL	Access identifier of the corresponding AIDString column.
AIDString	VARCHAR2(32)	NOT NULL UNIQUE	Represents the data that makes up the AID deny list for event forwarding discriminator (EFD) profiles.

1.2.221  OSS_Alarm_Filter_Table

The OSS_Alarm_Filter_Table (Table 1-218) contains information about EFDs and their characteristics (such as whether or not event forwarding is included in the EFD profile). The table contains 12 default entries.

Primary key: OSS_ALARM_FILTER_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-218   OSS_Alarm_Filter_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
AlarmFilterId	NUMBER(4)	NOT NULL	Unique alarm filter ID for this table.
FilterName	VARCHAR2(128)	NOT NULL UNIQUE	Filter profile name.
AlarmSeverity	NUMBER(1)	DEFAULT 0	Minimum severity of alarms that are forwarded to the OSS. Values are: 1: Not reported alarm clear 2: Not reported alarm declared 3: Not alarmed 4: Warning 5: Minor 6: Major 7: Critical
EventReportingFlag	NUMBER(1)	DEFAULT 0	Indicates whether events should be forwarded to the Operations Support System (OSS). Values are: 0: No 1: Yes
AlarmReportingFlag	NUMBER(1)	DEFAULT 1	Indicates whether alarms should be forwarded on the OSS connection. Values are: 0: Disabled 1: Enabled
PMReportingFlag	NUMBER(1)	DEFAULT 0	Indicates whether PM data should be forwarded on the OSS connection. Values are: 0: Disabled 1: Enabled

1.2.222  OSS_Alarm_Fltr_AID_Deny_Tbl

The OSS_Alarm_Fltr_AID_Deny_Tbl (Table 1-219) contains information about which AIDs are denied for specific EFD profiles. If one EFD profile denies more than one AID, the table contains more than one entry for that EFD profile. The AID ID corresponds to the AID stored in the OSS_AID_ENUM_Table.

Primary key: OSS_ALARM_FLTR_AID_DENY_TBL_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-219   OSS_Alarm_Fltr_AID_Deny_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
AlarmFilterId	NUMBER(4)	NOT NULL	ID of the alarm filter that is listed in the OSS_Alarm_Filter_Table.
AidID	NUMBER(4)	NOT NULL	Values are: 0: DS1 1: EC1 2: OC12 3: OC3 4: OC48 5: OC192 6: STS1 7: STS12C 8: STS3C 9: STS48C 10: T1 11: T3 12: VT1 13: CHASSIS 14: ENET 15: BITS 16: ENV 17: SYNCN 18: ALL

1.2.223  OSS_Alarm_Fltr_TID_Deny_Tbl

The OSS_Alarm_Fltr_TID_Deny_Tbl (Table 1-220) contains information about alarm filters based on NE or target identifier (TID).

Primary key: OSS_ALARM_FLTR_TID_DENY_TBL_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-220   OSS_Alarm_Fltr_TID_Deny_Tbl 

Column Name	Oracle Data Type	Integrity Constraints	Description
AlarmFilterId	NUMBER(4)	NOT NULL	ID of the alarm filter that is listed in the OSS_Alarm_Filter_Table.
NEDBAccessID	NUMBER(10)	NOT NULL	NE database ID of the TID that is blocked for the corresponding alarm filter ID column; same as NEDBAccessID in the NE_Info_Table.

1.2.224  OSS_CORBA_User_Table

The OSS_CORBA_User_Table (Table 1-221) contains information about OSS users configured in CTM and used by CTM GateWay/CORBA.

Primary key: OSS_CORBA_USER_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-221   OSS_CORBA_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
IPAddress	NUMBER(10)	—	IP address.
OSSName	VARCHAR2(128)	NOT NULL UNIQUE	Name that the OSS uses to log into CTM GateWay/CORBA.
OSSPasswd	VARCHAR2(128)	NOT NULL	Encrypted password that the OSS uses to log into CTM GateWay/CORBA.

1.2.225  OSS_User_Table

The OSS_User_Table (Table 1-222) contains information about OSS users configured in CTM and used by CTM GateWay/TL1.

Primary key: OSS_USER_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-222   OSS_User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
IPAddress	NUMBER(10)	NOT NULL	IP address.
OSSName	VARCHAR2(128)	NOT NULL UNIQUE	OSS name.
OSSPasswd	VARCHAR2(128)	NOT NULL	OSS password.
ListenerModeFlag	NUMBER(1)	DEFAULT 1	Indicates whether autonomous messages should be forwarded on the OSS connection. Values are: 0: Do not forward 1: Forward
ActUserDenyFlag	NUMBER(1)	DEFAULT 1	Indicates whether ACT_USER failures should be answered with a DENY or silently discarded. Values are: 0: Discard 1: Send deny
AlarmFilterFlag	NUMBER(1)	DEFAULT 0	Indicates whether the filter is in effect. Values are: 0: No 1: Yes
AlarmFilterId	NUMBER(4)	DEFAULT 0	Alarm filter associated with this user.
DomainMgrFlag	NUMBER(1)	DEFAULT 0	Indicates whether the OSS can use the Domain Manager capabilities of the Element Management System (EMS). Values are: 0: No 1: Yes

1.2.226  Password_History_Table

The Password_History_Table (Table 1-223) contains a configurable number of previously-used enduser passwords. This is a security precaution intended to limit password reuse.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-223 Password_History_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserID	NUMBER(4)	NOT NULL	User ID.
UserPassword	RAW(256)	—	User password.
Timestamp	DATE	—	Time stamp.

1.2.227  PatchCord_Table

The PatchCord_Table (Table 1-224) is used to store the virtual link ID of a patchcord. When a new patchcord link is added in the Link_Table, a new row is added in the PatchCord_Table having the same link ID and one virtual link ID for each endpoint. A row in the PatchCord_Table is deleted when the corresponding link is deleted from the Link_Table.

Primary key: LINKID_PK

Tablespace:BASE_DATA_TABLESPACE

Table 1-224 PatchCord_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
LinkID	NUMBER(8)	NOT NULL	Unique number created by the database.
VirtualLinkIdSrc	NUMBER(10)	DEFAULT -1	Source virtual link identifier.
VirtualLinkIdDst	NUMBER(10)	DEFAULT -1	Destination virtual link identifier.

1.2.228  PM_ATTR_Value_Mapping_Table

The PM_ATTR_Value_Mapping_Table (Table 1-225) is used to map real-time polling result values to different display values.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-225 PM_Attr_Value_Mapping_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
PMViewName	VARCHAR2(64)	NOT NULL	Specifies the PM table.
ATTRIndex	NUMBER(5)	NOT NULL	Index from ObjectAttribute table.
ATTRValue	VARCHAR2(64)	NOT NULL	Returned attribute value from realtime PM query.
DisplayText	VARCHAR2(64)	NOT NULL	Text displayed in PM columns.

1.2.229  PM_ATTRID_Mapping_Table

The PM_ATTRID_Mapping_Table (Table 1-226) contains mapping information for the retrieval of real-time PM data from the NE.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-226 PM_ATTRID_Mapping_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
PMViewName	VARCHAR2(64)	NOT NULL	Specifies the PM table.
PMName	VARCHAR2(256)	NOT NULL	PM parameter name.
MetadataIndex	NUMBER(5)	NOT NULL	Index from ObjectAttribute Table.
ATTRIndex	NUMBER(5)	NOT NULL	Index from ObjectAttribute Table.
Validity_AttrIndex	NUMBER(5)	—	Attribute ID for validity attributes.
IS24H	NUMBER(1)	NOT NULL	Values are: -1: N/A 0: 15 minutes 1: 24 hour
DisplayText	VARCHAR2(64)	—	Text displayed in PM columns.
PMPARAMID	NUMBER(5)	—	PM parameter ID.

1.2.230  PM_Cerent_Info_Table

The PM_Cerent_Info_Table (Table 1-227) contains mapping information that associates each PM table column name to a unique identifier.

Primary key: PM_Cerent_Info_Table_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-227 PM_Cerent_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
PMParamID	NUMBER(10)	—	—
PMTableName	VARCHAR2(256)	NOT NULL	PM table name.
PMTableParam	VARCHAR2(256)	NOT NULL	PM table parameter name.
PMTableColNo	NUMBER(10)	—	Table column number.
DBColType	VARCHAR(64)	—	Database column type.
DBColSize	NUMBER(10)	—	Database column size.

1.2.231  PM_Historical_Appointments

The PM_Historical_Appointments (Table 1-228) contains information about the PM data collection schedule.

---

Note For medium, large, and high-end configurations, this table is partitioned.

---

Primary key: PM_HISTORICAL_APPOINTMENTS_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-228   PM_Historical_Appointments 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDbaccessid	NUMBER(10)	NOT NULL	NEDBaccessid of the purged NE; same as NEDBaccessID in the NE_Info_Table.
IntervalType	NUMBER(1)	NOT NULL	Types of intervals. Values are: 0: 15 minutes 1: 24 hours
OriginalScheduledTime	DATE	NOT NULL	Originally scheduled PM collection time.
Status	NUMBER(1)	NOT NULL	Values are: 0: Success 1: Failure 2: In Process 3: Pending
TimeStamp	DATE	NOT NULL	Time stamp that shows the interval at which the set of statistics was stored.

1.2.232  PM_Metadata_Table

The PM_Metadata_Table (Table 1-229) contains metadata for each possible PM category (such as section, line, path, etc.)

Primary key: PM_Metadata_Table_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-229 PM_Metadata_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEModel	NUMBER(10)	NOT NULL	NE model.
NEModelIndex	NUMBER(10)	NOT NULL	NE model index.
ModuleType	NUMBER(10)	NOT NULL	Module type.
PMCategory	VARCHAR2(64)	NOT NULL	PM category.
OBJECTTYPEID	NUMBER(10)	NOT NULL	Object type ID.
PMTableColNo	NUMBER(10)	—	PM table column number.
PMParamID	NUMBER(10)	NOT NULL	Sequence ID.
InterfaceType	VARCHAR2(64)	NOT NULL	Interface type.
ParamPosition	NUMBER(10)	NOT NULL	Bulk PM parameter position.
ValidityPosition	NUMBER(10)	NOT NULL	Bulk PM validity position.
TCANumber	NUMBER(10)	—	TCA number.
TCALocation	VARCHAR(10)	—	TCA location.
Direction	VARCHAR(10)	DEFAULT `N/A'	Line direction.

1.2.233  Proxy_Server_Table

The Proxy_Server_Table (Table 1-230) contains information about the various proxy servers in the network.

Primary key: PROXY_SERVER_TABLE_PK

Tablespace: ONS15454_DATA_TABLESPACE

Table 1-230 Proxy_Server_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NEDBAccessID of the NE; same as NEDBAccessID in the NE_Info_Table.
NEModelIndex	NUMBER(4)	DEFAULT 0	Index of the appropriate database record for the version. The value 0 is used to represent an unknown model index.
NEIPAddr	NUMBER(10)	NOT NULL	IP address of the NE.
GNEDBAccessID	NUMBER(10)	NOT NULL	NEDBAccess ID of the GNE.
GNEIPAddr	NUMBER(10)	NOT NULL	IP address of the GNE.
ISPROXYINGGNE	NUMBER(1)	NOT NULL	In the case of multiple GNEs in a ring, is the GNE proxying for the ENE(s).
MaskLength	NUMBER(4)	DEFAULT 0	Specifies if this is the host or subnet.
Cost	NUMBER(10)	DEFAULT 0	Routing cost for this client.
Flags	NUMBER(4)	DEFAULT 0	Routing flags for this client.

1.2.234  Purged_NE_Table

The Purged_NE_Table (Table 1-231) stores NEs that have been removed from the database.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-231   Purged_NE_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDbaccessid	NUMBER(10)	NOT NULL	NEDBaccessid of the purged NE; same as NEDBaccessID in the NE_Info_Table.
NeSysId	VARCHAR2(128)	NOT NULL	System ID of the purged NE.
NEIPADDRESS	NUMBER(10)	—	IP address of the purged NE.
PurgedTimestamp	DATE	NOT NULL	Time stamp when the NE was purged.
Status	NUMBER(1)	DEFAULT 0 NOT NULL	Status of the purge process.
PurgeComment	VARCHAR2(512)	—	Comment of the purge result.

1.2.235  Roll_Table

The Roll_Table (Table 1-232) contains information about the ONS 15600 Rolls Table.

Primary key: ROLL_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-232 Roll_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
RollNodeId	NUMBER(10)	NOT NULL	Node ID of the source node of the roll-from circuit.
ConnectionIndex	NUMBER(10)	NOT NULL	Unique number within each source node. The combination of CktNodeId and ConnectionIndex results in a unique number in the whole network. Note that these are internal fields and should not be displayed.
RollFromCktNodeId	NUMBER(10)	NOT NULL	Node ID of the roll-from circuit.
RollFromCktUniqueID	NUMBER(10)	NOT NULL	Unique ID of the roll-from circuit.
RollToCktNodeID	NUMBER(10)	—	Node ID of the roll-to circuit.
RollToCktUniqueID	NUMBER(10)	—	Unique ID of the roll-to circuit.
RollState	NUMBER(1)	—	Roll state. Values are: 0: Roll pending 1: Roll completed 2: Roll canceled 3: Incomplete
RollValidSignal	NUMBER(1)	—	Valid signal on the roll-to point. Values are: 0: True 1: False
RollMode	NUMBER(1)	—	Mode of roll. Values are: 0: Auto 1: Manual
RollPathNodeID	NUMBER(10)	—	Node ID of the roll path.
RollPathModuleType	NUMBER(8)	—	Module type of the roll path.
RollPathIfIndex	NUMBER(20)	—	If static index at the roll path.
RollPathObjectIndex	NUMBER(10)	—	Object index at the roll path.
RollPathPhysicalLoc	NUMBER(20)	—	Physical location of the roll path.
RollPathModelType	NUMBER(4)	—	Model type of the poll path.
RollFromNodeID	NUMBER(10)	—	Node ID of the roll-from path.
RollFromModuleType	NUMBER(8)	—	Module type of the roll-from path.
RollFromIfIndex	NUMBER(20)	—	If static index at the roll-from path.
RollFromObjectIndex	NUMBER(10)	—	Object index at the roll-from path.
RollFromPhysicalLoc	NUMBER(20)	—	Physical location of the roll-to path.
RollFromModelType	NUMBER(4)	—	RollToPath model type.
RollToNodeId	NUMBER(10)	—	Node ID of the roll-to path.
RollToModuleType	NUMBER(8)	—	Module type of the roll-to path.
RollToIfIndex	NUMBER(20)	—	If Static index at the roll-from path.
RollToObjectIndex	NUMBER(10)	—	Object index at roll-from path.
RollToPhysicalLoc	NUMBER(20)	—	Physical location at the roll-from path.
RollToModelType	NUMBER(4)	—	Model type of the roll-from path.
canBeCompleted	NUMBER(1)	—	Roll can be completed if the value is true. Values are: 0: True 1: False
canBeFinished	NUMBER(1)	—	Roll can be finished if the value is true. Values are: 0: True 1: False
canBeCancelled	NUMBER(1)	—	Roll can be cancelled if the value is true. Values are: 0: True 1: False

1.2.236  Schedule_Info_Table

Primary key: Schedule_Info_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-233 Schedule_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ActivityType	VARCHAR2(64)	NOT NULL	Type of scheduled activity.
NEServiceName	VARCHAR2(256)	NOT NULL	NE service name.
RunOnMonday	NUMBER(1)	DEFAULT 1 NOT NULL	Run configuration resynchronization on Monday. Values are: 0: False 1: True
RunOnTuesday	NUMBER(1)	DEFAULT 1 NOT NULL	Run configuration resynchronization on Tuesday. Values are: 0: False 1: True
RunOnWednesday	NUMBER(1)	DEFAULT 1 NOT NULL	Run configuration resynchronization on Wednesday. Values are: 0: False 1: True
RunOnThursday	NUMBER(1)	DEFAULT 1 NOT NULL	Run configuration resynchronization on Thursday. Values are: 0: False 1: True
RunOnFriday	NUMBER(1)	DEFAULT 1 NOT NULL	Run configuration resynchronization on Friday. Values are: 0: False 1: True
RunOnSaturday	NUMBER(1)	DEFAULT 1 NOT NULL	Run configuration resynchronization on Saturday. Values are: 0: False 1: True
RunOnSunday	NUMBER(1)	DEFAULT 1 NOT NULL	Run configuration resynchronization on Sunday. Values are: 0: False 1: True
ActivityStartTime	DATE	NOT NULL	Time to start daily resynchronization.
ActivityInterval	NUMBER(4)	DEFAULT 360 NOT NULL	Resynchronization interval in minutes.
LastExecutionTime	DATE	—	Last execution time.

1.2.237  Server_Monitor_Table

The Server_Monitor_Table (Table 1-234) contains information about the server monitor.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-234   Server_Monitor_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ParameterIndex	NUMBER(10)	NOT NULL	Index used in the alarm.
Value	VARCHAR(32)	—	Value of the parameter.
CollectionTime	DATE	—	Collection time of the parameter.
NEDBAccessID	NUMBER(10)	—	Database ID of the NE; same as NEDBAccessID in the NE_Info_Table.

1.2.238  Server_Parameter_Table

The Server_Parameter_Table (Table 1-235) contains information about the server.

Primary key: SERVER_PARAMETER_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-235   Server_Parameter_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ParameterIndex	NUMBER(10)	NOT NULL	Index used in the alarm.
ParameterName	VARCHAR(32)	NOT NULL	Name of the parameter.
DisplayName	VARCHAR(64)	NOT NULL	Name of the parameter for display.
ModelType	NUMBER(4)	NOT NULL	Model type. Values are: 0: NA -1: CTM -2: System -3: Network
Type	NUMBER(1)	NOT NULL	Parameter type. Values are: 1: Application task 2: System task 3: Circuit creation task
ConfigProperty	VARCHAR(32)	NOT NULL	Property name in the CTM_Config_Table.

1.2.239  Subnetwork_Table

The Subnetwork_Table (Table 1-236) contains information about the subnetworks created by CTM users.

Primary key: SUBNETWORK_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-236 Subnetwork_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
SubnetID	NUMBER(8)	—	Autogenerated key for the table.
SubnetName	VARCHAR2(64)	—	Name of the subnetwork.
SubnetSystemTitle	VARCHAR2(64)	—	Another name of the subnetwork.
SubnetUserLabel	VARCHAR2(64)	—	Another name of the subnetwork.
SubnetType	NUMBER(1)	—	Type of subnetwork. Values are: 1: SONET 2: SDH 3: Other 4: Unknown
SubnetTopology	NUMBER(2)	—	Type of subnetwork topology. Valid values are: 1: Other 2: Point-to-point 3: Linear 4: UPSR 5: SNC 6: BLSR 7: MSSP 8: MESH 9: Open UPSR 10: Open SNC 11: Hybrid 12: Singleton 13: Unknown
SubnetGneID	NUMBER(4)	NOT NULL	Primary key of the GNE table.
NPId	NUMBER(10)	—	ID of the network partition associated with the subnetwork.

1.2.240  SVC_Config_Table

Primary key: SVC_Config_Table_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-237 SVC_Config_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
SID	NUMBER(10)	NOT NULL	Service ID.
SVCName	VARCHAR2(64)	NOT NULL	Service name.
NEModelType	NUMBER(4)	NOT NULL	Model type of the NE.
SVCKind	NUMBER(10)	NOT NULL	Service type. Valid values are: 0: NE 1: PM
NPID	NUMBER(10)	NOT NULL	Network partition ID.
NECount	NUMBER(10)	NOT NULL	Number of NEs managed by the service.
State	NUMBER(5)	NOT NULL	State of the service. Valid values are: 0: Stopped 1: Running 2: Failed

1.2.241  SVC_Info_Table

The SVC_Info_Table (Table 1-238) contains information about the service package.

Primary key: SVC_INFO_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-238   SVC_Info_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
SvcID	NUMBER(10)	NOT NULL	Service ID.
SvcName	VARCHAR(64)	NOT NULL	Service name.
SvcPackageID	NUMBER(10)	NOT NULL	Unique ID of the service package.
SvcKind	NUMBER(10)	NOT NULL	Service kind. Values are: 0: NE 1: PM
SvcConfigName	VARCHAR(64)	NOT NULL	Service configuration name.
IsNPDependent	NUMBER(1)	NOT NULL	Values are: 0: False 1: True
IOR	VARCHAR2(64)	—	IOR representation.

1.2.242  SVC_NEModel_Table

The SVC_NEModel_Table (Table 1-239) contains information about the service NEs.

Primary key: SVC_NEMODEL_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-239   SVC_NEModel_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
SvcClassName	VARCHAR(64)	NOT NULL	Service name.
SvcNeModelType	NUMBER(4)	NOT NULL	Associated model type.
SvcNeType	NUMBER(4)	NOT NULL	Service NE type. Values are: 0: Cerent NE 1: Non Cerent NE
SvcKind	NUMBER(10)	NOT NULL	Service type. Values are: 0: NE 1: PM

1.2.243  SVC_Package_Table

The SVC_Package_Table (Table 1-240) contains information about the service package.

Primary key: SVC_PACKAGE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-240   SVC_Package_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
SvcPackageId	NUMBER(10)	NOT NULL	Unique sequence number.
SvcPackageName	VARCHAR2(64)	NOT NULL	Unique name for the package.

1.2.244  Sway_User_Port_Table

The Sway_User_Port_Table is obsolete.

1.2.245  Table_Info

The Table_Info table (Table 1-241) contains information about the sortable columns in the CTM client GUI.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-241   Table_Info 

Column Name	Oracle Data Type	Integrity Constraints	Description
TABLENAME	VARCHAR2(30)	NOT NULL	Name of the table.
NAME	VARCHAR2(30)	NOT NULL	Name of the column.
VALUE	VARCHAR2(256)	NOT NULL	Order of the sortable columns.

1.2.246  TCA_Event_Table

The TCA_Event_Table (Table 1-242) contains Threshold Crossing Alert (TCA) information for TCAs received from NEs.

Primary key: none

Tablespace: EVENT_DATA_TABLESPACE

Table 1-242   TCA_Event_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	ID to access this table for an NE. Same as NEDBAccessID in NE_Info_Table.
ModuleOrIfIndex	NUMBER(20)	NOT NULL	Unique integer that identifies an interface in the NE. Same as ifStaticIndex of Interface_Table.
AlarmEventType	NUMBER(5)	NOT NULL	Type of alarm/event table. List of valid types ranges from 1 to n and can be found in the Alarm_Event_Type_ENUM_ Table.
ModuleType	NUMBER(8)	DEFAULT 0	Module type.
PhysicalLoc	NUMBER(20)	DEFAULT 0	Physical location.
TcaEventType	NUMBER(5)	NOT NULL	Type of TCA. Valid types can be found in the TCA_Event_Type_ Table.
TcaLocation	VARCHAR2(20)	DEFAULT `Not Applicable'	Displays near or far end TCA location.
TcaPeriod	VARCHAR2(20)	DEFAULT `Not Applicable'	Displays TCA period: 15 minutes or 24 hours.
TcaValue	VARCHAR2(20)	—	Displays TCA value, which crossed threshold.
Direction	VARCHAR2(20)	DEFAULT `N/A'	Displays direction of the line, Rx or Tx.
TimeStamp	DATE	NOT NULL	CTM time stamp.
NEEventTimeStamp	DATE	NOT NULL	NE time stamp.
ModelType	NUMBER(10)	DEFAULT 0	Model type.
ObjectType	NUMBER(10)	DEFAULT 0	Object type.
StrObjInstance	VARCHAR2(256)	—	StrObjInstance name.

1.2.247  TCA_Event_Type_Table

The TCA_Event_Type_Table (Table 1-243) contains static information about Threshold Crossing Alert (TCA) events.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-243   TCA_Event_Type_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NE_Model_Index	NUMBER(10)	NOT NULL	Index used in the TCA_Event_Type_Table.
TCA_Number	NUMBER(10)	NOT NULL	TCA number.
TCA_Type	VARCHAR2(64)	—	TCA type.
TCA_CTM_Type	VARCHAR2(64)	—	TCA CTM type.
TCA_TMF_Type	VARCHAR2(64)	—	TCA TMF type.
TCA_GWC_Type	VARCHAR2(64)	—	TCA GateWay/CORBA type.

1.2.248  Threshold_Table

The Threshold_Table (Table 1-244) contains the 15-minute and 1-minute threshold values for various entities in an NE.

Primary key: THRESHOLD_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-244   Threshold_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ThresholdType	NUMBER(2)	NOT NULL	Type of threshold value that is stored in the row. Values are: 1: OC-3 2: STS 3: VT 4: DS-1 5: Ethernet
ThresholdSubType	NUMBER(4)	NOT NULL	Subtype.
ThresholdString	VARCHAR2(128)	—	Display string for threshold type and subtype.
FifteenMinValue	NUMBER(10)	NOT NULL	15-minute threshold value.
OneDayValue	NUMBER(10)	NOT NULL	1-day threshold value.

1.2.249  Transaction_Log_Table

The Transaction_Log_Table (Table 1-245) stores information about CTM transactions.

Primary key: TRANSACTION_LOG_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-245   Transaction_Log_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
TransId	NUMBER(20)	NOT NULL	Transaction ID generated by the database sequence.
NEDBAccessID	NUMBER(10)	NOT NULL	Source node for circuit and network provisioning; same as NEDBAccessID in the NE_Info_Table.
TimeStamp	DATE	—	When the transaction occurred.
UserName	VARCHAR2(64)	—	Name of the CTM user.
ActionName	VARCHAR2(64)	—	Name of the transaction.
Result	NUMBER(1)	—	Indicates whether the transaction succeeded or failed. Values are: 0: Failure 1: Success
Parms	VARCHAR2(2048)	—	Name/value pairs: name1:values1, and so on.
ClassName	VARCHAR2(64)	—	Name of the class from which the transaction was generated.
Module	NUMBER(2)	—	ID of the predefined modules.
LogMessage	VARCHAR2(1024)	—	Transaction log message.
Service	VARCHAR2(64)	—	Name of the service that logged this entry (for example, ONS 15454 NE Service).

1.2.250  Unmanaged_NE_Inventory_Table

The Unmanaged_NE_Inventory_Table (Table 1-246) contains information about the unmanaged NE inventory table.

Primary key: UNMANAGED_NE_INVENTORY_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-246   Unmanaged_NE_Inventory_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEDBAccessID	NUMBER(10)	NOT NULL	NE database access ID.
SERIALNUMBER	VARCHAR2(32)	—	—

1.2.251  User_Map_Table

The User_Map_Table (Table 1-247) contains information about groups and NEs in the Domain Explorer tree that are assigned to a CTM user.

Primary key: USER_MAP_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-247   User_Map_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserID	NUMBER(4)	NOT NULL	User ID. Link to the User_Table.
TreeNodeType	NUMBER(1)	NOT NULL	Type of tree node. Values are: 1: Root node 2: Group node 3: NE node
GroupOrNEID	NUMBER(8)	NOT NULL	If TreeNodeType = 3, this column is the ID to access other NE tables; same as NEDBAccessID in the NE_Info_Table. If TreeNodeType = 2, this column is the group ID; same as GroupID in the Group_Info_Table. If TreeNodeType = 1, value is 0.

1.2.252  User_NE_Table

The User_NE_Table (Table 1-248) stores information about the NEs each user can view.

Primary key: None

Tablespace: BASE_DATA_TABLESPACE

Table 1-248   User_NE_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserID	NUMBER(4)	—	ID of the user.
Grouporneid	NUMBER(10)	—	Group ID or NEDBaccessid.

1.2.253  User_Preference_Table

The User_Preference_Table (Table 1-249) stores information about user preferences.

Primary key: USER_PREFERENCE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-249   User_Preference_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserName	VARCHAR2(64)	NOT NULL	CTM username.
ClientModule	NUMBER(4)	—	Client module ID. Values are: 0: Network Map 1: Control Panel
AutoRefresh	NUMBER(1)	—	Indicates whether autorefresh is on or off. Values are: 1: On 0: Off

1.2.254  User_Table

The User_Table (Table 1-250) contains information about all CTM users.

Primary key: USER_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-250   User_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserID	NUMBER(4)	NOT NULL	User ID. Link to User_Map_Table. Each user has a unique ID.
UserName	VARCHAR2(64)	NOT NULL	Unique name of the user.
UserPassword	RAW(256)	—	User password stored in Message Digest 5 (MD5) encrypted form.
TypeOfUser	NUMBER(1)	—	Type of user. Values are: 1: Visionway user 2: Serviceway user
SubTypeOfUser	NUMBER(3)	—	Subtype of user.
AreaName	VARCHAR2(64)	—	Name of the network area associated with the user.
LastLogInTime	DATE	—	Time when the user last logged in.
UserLoginDisabled	NUMBER(1)	—	Value is 1 if user login has been disabled.
UserDescription	VARCHAR2(256)	—	Description of the user.
CmsUser	VARCHAR2(64)	—	CTC username.
CmsPassword	VARCHAR2(64)	—	CTC password.
FailedAttempts	NUMBER(1)	DEFAULT 0	Number of failed user attempts.
StatusOfUser	NUMBER(1)	DEFAULT 0	User login status. Values are: 0: User logged in 1: User not logged in
PasswordSetTime	DATE	—	Time stamp when the password was set.
LastLoginFailtime	DATE	—	Time stamp when the last login failed.
Lockedstate	NUMBER(1)	DEFAULT 0	Lockout state. Values are: 0: Not locked 1: Locked
PropagateToNE	NUMBER(1)	DEFAULT 0	Values are: 0: Do not propagate user to NE 1: Propagate user to NE
EnablePswdChange	NUMBER(1)	DEFAULT 1	Values are: 0: Disabled 1: Enabled
FirstUse	NUMBER(1)	DEFAULT 1	Values are: 0: False 1: True
UseGlobalLockout	NUMBER(1)	DEFAULT 1	Values are: 0: False 1: True
LockoutEnabled	NUMBER(1)	DEFAULT 1	Values are: 0: False 1: True
LockoutPeriod	VARCHAR(3)	DEFAULT 30	Period after which client locks out.
UseGlobalLogout	NUMBER(1)	DEFAULT 1	Values are: 0: False 1: True
LogoutEnabled	NUMBER(1)	DEFAULT 1	Values are: 0: False 1: True
LogoutPeriod	VARCHAR(4)	DEFAULT 60	Period after which client logs out.
EnableMultipleLogin	NUMBER(1)	DEFAULT 1	Values are: 0: Disabled 1: Enable
AutoDisableInterval	NU MBER(3)	DEFAULT 60	Login active interval is 0 to 360 days.

1.2.255  User_Type_Table

The User_Type_Table (Table 1-251) contains information about the different CTM user types.

Primary key: USER_TYPE_TABLE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-251 User_Type_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
UserTypeID	NUMBER(4)	NOT NULL	User type ID that is unique for each user. Values are: 1: SuperUser 2: SysAdmin 3: NetworkAdmin 4: Operator 5: Provisioner
UserTypeName	VARCHAR2(64)	NOT NULL	Name of the user type.
Properties	NUMBER(1)	—	Defines whether the user has NEs assigned to him/her or not. Values are: 0: Assign no NEs 1: Assign all NEs 2: Assign NEs
Description	VARCHAR2(256)	—	Description of the user type.
isDefault	NUMBER(1)	DEFAULT 1	Defines if a user is a default user. Values are: 0: Custom user profile 1: Default user profile
AllowedSession	NUMBER(2)	DEFAULT 1	Defines if a user is allowed single or multiple user logins. Values are: 0: Allow multiuser login 1: Allow 1 user login 2: Allow 2 user login 3: Allow 3 user login 4: Allow 4 user login 5: Allow 5 user login 6: Allow 6 user login 7: Allow 7 user login 8: Allow 8 user login 9: Allow 9 user login 10:Allow 10 user login

1.2.256  Version_Table

The Version_Table (Table 1-252) contains version information about the NEs supported by CTM.

Primary key: VERSION_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-252   Version_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
NEType	NUMBER(4)	NOT NULL	Type of NE.
SoftwareVersion	VARCHAR2(128)	NOT NULL	Major software version supplied by the NE.
NEModelIndex	NUMBER(4)	NOT NULL	This table is created when the product is installed. This number is used in the Model_Type_Table and in the NE_Info_Table. Values are: 0: Unknown 1: Cisco ONS 15303 2: Cisco ONS 15304 3: Cisco ONS 15454 4: Cisco ONS 15800 2_x 5: Cisco ONS 15327 1_02
NEModelIndex (continued)	NUMBER(4)	NOT NULL	6: Cisco ONS 15801 2_x 7: Cisco ONS 15200 9: Cisco ONS 15454 3_03 10: Cisco ONS 15808 2_x 11: Cisco ONS 15800 1_x 12: Cisco ONS 15540 13: Cisco ONS 15801 1_x 14: Cisco ONS 15454 SDH 15: Cisco ONS 15540 ESP 0_5 16: Cisco ONS 15540 XPS 17: Cisco ONS 15530 18: Cisco ONS 15501 19: Cisco ONS 15454 3_10 20: Cisco ONS 15454 3_20 21: Cisco ONS 15454 3_30 22: Cisco ONS 15327 3_30 23: Cisco ONS 15200 1_1 24: Cisco ONS 15216 EDFA2 25: Cisco ONS 15216 EDFA1 26: Cisco ONS 15216 OADM2 27: Cisco ONS 15216 OADM1 28: Cisco ONS 15216 DWDM 29: Cisco ONS 15808 2_1 30: Cisco ONS 15600 31: Cisco ONS 15808 2_3 32: Cisco ONS 15454 3_04 33: Cisco ONS 15454 3_40 34: Cisco ONS 15327 3_40 35: Cisco ONS 15454SDH 3_40 36: Cisco ONS 15216 OSC 37: Cisco ONS 15216 DCU 38: Cisco ONS 15800 2_1 39: Cisco ONS 15801 2_1 40: Cisco ONS 15216 EDFA2 2_1
NEModelIndex (continued)	NUMBER(4)	NOT NULL	41: Cisco ONS 15216 OADM1 2_1 42: Cisco ONS 15454 4_00 43: Cisco ONS 15327 4_00 44: Cisco ONS 15454SDH 4_00 45: Cisco ONS 15302 1_0 46: Cisco ONS 15305 1_0 47: Cisco ONS 15454 4_01 48: Cisco ONS 15327 4_01 49: Cisco ONS 15454 SDH 4_01 50: Cisco ONS 15600 1_10 51: Unmanaged NE 53: Cisco ONS 15216 Unidirfilter 54: Cisco ONS 15501 AC 55: Cisco ONS 15454 4_60 56: Cisco ONS 15327 4_60 57: Cisco ONS 15454SDH 4_60 58: Cisco ONS 15216 EDFA3 59: Cisco ONS 15808 2_4 60: Cisco ONS 15216 EDFA2 2_3 61: Cisco ONS 15454 5_00 62: Cisco ONS 15454 SDH 5_00 63: Cisco ONS 15327 5_00 64: Cisco ONS 15600 5_00 65: Cisco ONS 15310CL 5_00 66: Cisco ONS 15216 EDFA2 2_4 68: Cisco ONS 15302 2_0 69: Cisco ONS 15305 1_1 70: Cisco ONS 15305 2_0 71: HFR 72: GSR IOX 73: CATALYST 6509 74: Cisco ONS 15600SDH 1_40 75: Cisco ONS 15454 4_70 76: Cisco ONS 15454 SDH 4_70
NEModelFeatures	VARCHAR2(2)	DEFAULT 'NN'	Used to specify the features of the model.
ModelName	VARCHAR2(50)	NOT NULL	Name of the model.
FactoryDefault	NUMBER(1)	DEFAULT 0	Default supported NE versions. When a new database is installed, this table is prepopulated with the supported NE versions. When a user adds a new NE version, the FactoryDefault column is set to zero, indicating a nonfactory-supplied version.

1.2.257  Wavemux_NE

The Wavemux_NE table is obsolete.

1.2.258  XML_Parser_Static_Tree_Table

The XML_Parser_Static_Tree_Table (Table 1-253) stores extensible markup language (XML) parsing information used by CTM server to parse the XML node passed by the CTC model layer.

Primary key: XML_PARSER_STATIC_TREE_PK

Tablespace: BASE_DATA_TABLESPACE

Table 1-253   XML_Parser_Static_Tree_Table 

Column Name	Oracle Data Type	Integrity Constraints	Description
ModelIndex	NUMBER(8)	NOT NULL	Model index for the static tree.
TreeIndex	NUMBER(8)	NOT NULL	Index used in conjunction with Model Index to identify the static tree.
NodeIndex	NUMBER(8)	NOT NULL	Index of the node.
ParentIndex	NUMBER(8)	NOT NULL	Parent node index; -1 for the root node.
NodeName	VARCHAR(128)	NOT NULL	Name of the XML node.
NodeValue	VARCHAR(128)	—	Stores set tag for the corresponding CTM attribute name.
CTMAttributeName	VARCHAR(128)	—	Corresponding CTM attribute name.