Table Of Contents

Notifications, Fault Management, and Probable Cause Mapping

A.1  Overview of Notifications

A.2  Tips to Improve Notification Throughput

A.3  Supported Events

A.3.1  Object Creation

A.3.2  Object Deletion

A.3.3  Attribute Value Change

A.3.4  State Change Event

A.3.5  Protection Switch

A.3.6  Threshold Crossing Alert

A.3.7  Alarm

A.3.8  Heartbeat Event

A.4  Probable Cause Mapping

A.4.1  TMF-Defined Probable Cause

A.4.2  CTM GateWay/CORBA Mapping—EMS

A.4.3  CTM GateWay/CORBA Mapping—ONS 15200

A.4.4  CTM GateWay/CORBA Mapping—ONS 15216

A.4.5  CTM GateWay/CORBA Mapping—ONS 15302 and ONS 15305

A.4.6  CTM GateWay/CORBA Mapping—ONS 15327

A.4.7  CTM GateWay/CORBA Mapping— ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R4.1 and R4.6

A.4.8  CTM GateWay/CORBA Mapping—ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R5.0

A.4.9  CTM GateWay/CORBA Mapping—ONS 15454 SONET

A.4.10  CTM GateWay/CORBA Mapping—ONS 15501

A.4.11  CTM GateWay/CORBA Mapping—ONS 15530

A.4.12  CTM GateWay/CORBA Mapping—ONS 15540

A.4.13  Optical Monitoring Alarms—ONS 15530 and ONS 15540

A.4.14  CTM GateWay/CORBA Mapping—ONS 15600 SONET

A.4.15  CTM GateWay/CORBA Mapping—ONS 15600 SDH

A.4.16  CTM GateWay/CORBA Mapping-ONS 15800, ONS 15801, and ONS 15808

Notifications, Fault Management, and Probable Cause Mapping

---

This appendix includes information on CTM GateWay/CORBA's notification service, supported events, and mapping. It provides the following:

•Overview of Notifications

•Tips to Improve Notification Throughput

•Supported Events

•Probable Cause Mapping

A.1  Overview of Notifications

The notification service forwards all fault notifications received from managed NEs to the network management system (NMS). The notification service also forwards object creation, object deletion, attribute change, protection switch, and threshold crossing alert (TCA) events. TMF 814 defines the structure and format of attributes for all events and alarms.

---

Note The CTM server and the Operations Support System (OSS) host must have Domain Name System (DNS) enabled in order to receive notifications.

---

CTM creates the notification channel with the quality of service (QoS) parameters listed in Table A-1.

Table A-1 QoS Parameters for the Notification Channel 

Parameter	Value
ConnectionReliability	BestEffort
StartTimeSupported	false
OrderPolicy	FifoOrder
DiscardPolicy	FifoOrder
MaxEventsPerConsumer1	10000

1 The MaxEventsPerConsumer value is configurable. To modify this value, see the "B.5  Configuring CTM GateWay/CORBA" section on page B-5. All other parameter values are defined by the TMF and cannot be changed.

CTM sets the RejectNewEvents admin property of the channel to true, as defined by the TMF.

Every notification that CTM generates has the QoS parameters listed in Table A-2. These parameter values are defined by the TMF and cannot be changed.

Table A-2 QoS Parameters for Notifications

Parameter	Value
EventReliability	BestEffort
Priority	DefaultPriority
Timeout	30 minutes for alarms and TCAs; 24 hours for all other notifications

The NMS retrieves all active alarms on the Element Management System (EMS) and on managed element objects. The NMS filters alarms based on probable cause and managed element name. CTM GateWay/CORBA forwards CTM-specific alarms to the NMS.

For NE-related alarms, CTM inserts the original probable cause in the alarm's nativeProbableCause field. The TMF-mapped probable cause is available in the probableCause field.

---

Note If there is an alarm on an STS/VC4 CTP utilizing all the ports of a DS1/E1 card, the alarm is reported with the containing PTP as port=127. If an STS/VC4 SNC exists with one of the drop CTP of the SNC using all the ports on a DS1/E1 card, and if there is an alarm on the STS CTP, CTM reports the port number of the containing PTP as 127.

---

A.2  Tips to Improve Notification Throughput

While CTM GateWay/CORBA and the bundled notification server are developed and tuned to provide high throughput, you might want to take additional steps to improve throughput and avoid any loss of notifications. You should implement the StructuredPushConsumer interface defined by the Object Management Group (OMG) and implement the push_structured_event method. The notification server invokes this method on the NMS.

---

Caution Because all CORBA calls are blocking, the notification server thread will block until the push_structured_event method completes. If you try to perform a time-consuming task before the method completes, you will block the notification server.

---

To improve throughput, you should receive the event and forward it to another thread for processing.

For example:

void push_structured_event(StructuredEvent notification) {

	try {

		some_other_thread_queue.addNotification(notification);

	} catch (Exception ex) {

		// catch all exception and ignore

		ex.printStackTrace();

	}

}

---

Caution As shown in the example, make sure to catch all exceptions. If you do not catch all exceptions, you will stop receiving notifications.

---

A.3  Supported Events

A.3.1  Object Creation

Table A-3 lists the object creation types and attributes.

Table A-3 Object Creation 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes
objectType	notifications::ObjectType_T	Yes
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	No
edgePoint	boolean	No

Object creation notifications are sent to the NMS for the objects in Table A-4.

Table A-4 Object Creation Notifications 

Object Type	Type Sent in remainder_of_body for Object Creation Event
OT_MANAGED_ELEMENT	managedElement::ManagedElement_T
OT_MULTILAYER_SUBNETWORK	multiLayerSubnetwork::MultiLayerSubnetwork_T
OT_TOPOLOGICAL_LINK	topologicalLink::TopologicalLink_T
OT_SUBNETWORK_CONNECTION	subnetworkConnection::SubnetworkConnection_T
OT_EQUIPMENT	equipment::Equipment_T
OT_PROTECTION_GROUP	protection::ProtectionGroup_T
OT_L2TOPOLOGY	MultiLayerSubnetwork::L2Topology_T
OT_MLVLAN	MultiLayerSubnetwork::MLVLAN_T
OT_ROLL	MultiLayerSubnetwork::Roll_T
OT_VCAT	SubnetworkConnection::VCAT_T

CTM does not generate Object Creation events for SubnetworkConnection for the ONS 15540.

CTM cannot give the object name for Object Creation events for ONS 15501, ONS 15530, and ONS 15540 equipment.

---

Note The number of equipment holders for NEs supported by CTM is constant. To reduce traffic between CTM and the NMS, CTM does not generate object creation events for equipment holders. The number of PTPs on EQUIPMENT is also constant. Therefore, CTM generates only OBJECT_CREATION events for EQUIPMENT.

---

A.3.2  Object Deletion

Table A-5 lists the object deletion types and attributes.

Table A-5 Object Deletion 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes
objectType	notifications::ObjectType_T	Yes
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	No
edgePoint	boolean	No

Object deletion notifications are sent to the NMS for the objects in Table A-6.

Table A-6 Object Deletion Notifications

Object Type	Type Sent in remainder_of_body for Object Deletion Event
OT_MANAGED_ELEMENT	managedElement::ManagedElement_T
OT_MULTILAYER_SUBNETWORK	multiLayerSubnetwork::MultiLayerSubnetwork_T
OT_TOPOLOGICAL_LINK	topologicalLink::TopologicalLink_T
OT_SUBNETWORK_CONNECTION	subnetworkConnection::SubnetworkConnection_T
OT_EQUIPMENT	equipment::Equipment_T
OT_PROTECTION_GROUP	protection::ProtectionGroup_T
OT_L2TOPOLOGY	MultiLayerSubnetwork::L2Topology_T
OT_MLVLAN	MultiLayerSubnetwork::MLVLAN_T
OT_ROLL	MultiLayerSubnetwork::Roll_T
OT_VCAT	SubnetworkConnection::VCAT_T

CTM does not generate object deletion events for SubnetworkConnection for ONS 15501, ONS 15530, and ONS 15540 NEs.

---

Note The number of equipment holders for all NEs supported by CTM is constant. To reduce traffic between CTM and the NMS, CTM does not generate object deletion events for equipment holders. The number of PTPs on EQUIPMENT is also constant. Therefore, CTM generates only OBJECT_DELETION events for EQUIPMENT.

---

A.3.3  Attribute Value Change

Table A-7 lists the attribute value change (AVC) types and attributes.

Table A-7 Attribute Value Change 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes
objectType	notifications::ObjectType_T	Yes
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	No
edgePoint	boolean	No
attributeList	notifications::NVList_T	Yes

Attribute value change notifications are sent to the NMS for the objects and attributes in Table A-8.

Table A-8 Attribute Value Change Notifications 

Object Type	Attributes
OT_EMS	nativeEMSName
OT_MANAGED_ELEMENT	nativeEMSName location version productName
OT_MULTILAYER_SUBNETWORK	NativeEMSName
OT_TOPOLOGICAL_LINK1	—
OT_SUBNETWORK_CONNECTION2	—
OT_L2TOPOLOGY	NativeEMSName
OT_MLVLAN	None. (The purpose of this event is to notify NMS that this VLAN has been updated.)
OT_ROLL	None. (The purpose of this event is to notify NMS that this Roll has been updated.)
OT_VCAT	None. (The purpose of this event is to notify NMS that this VCAT has undergone a change.)

1 The OT_TOPOLOGICAL_LINK event notifies the NMS of a topological link attribute change. 2 The OT_SUBNETWORK_CONNECTION event is guaranteed only when CTM fails to delete a subnetwork connection (SNC) and the SNC remains in the same state. This event notifies the NMS that the SNC deletion failed.

---

Note CTM does not generate AVC events for SubnetworkConnection for ONS 15501, ONS 15530, and ONS 15540 NEs.

---

A.3.4  State Change Event

Table A-9 lists the state change event types and attributes.

Table A-9 State Change Event 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes
objectType	notifications::ObjectType_T	Yes
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	No
edgePoint	boolean	No
attributeList	notifications::NVList_T	Yes

Attribute change notifications are sent to the NMS for the objects and attributes in Table A-10.

Table A-10 State Change Event Notifications 

Object Type	Attributes
OT_MANAGED_ELEMENT	communicationState—CTM supports following values: •CS_AVAILABLE •CS_UNAVAILABLE emsInSyncState—CTM will support following values: •True •False
OT_EQUIPMENT_HOLDER	holderState—State change. CTM supports the following values: •EMPTY •INSTALLED_AND_EXPECTED •EXPECTED_AND_NOT_INSTALLED •MISMATCH_OF_INSTALLED_AND_EXPECTED
OT_SUBNETWORK_CONNECTION1	sncState—CTM supports the following values: •SNCS_DELETING •SNCS_PARTIAL •SNCS_ACTIVE
OT_L2TOPOLOGY	L2TopoState—CTM supports the following values: •L2TS_COMPLETE •L2TS_INCOMPLETE topoInSyncState—CTM supports following values: •true •false
OT_MLVLAN	vlanState—CTM supports following values: •VLS_COMPLETE •VLS_INCOMPLETE
OT_ROLL	rollState—CTM supports the following values: •ROLL_PENDING •ROLL_COMPLETED •ROLL_CANCELLED •ROLL_INCOMPLETE
OT_VCAT	VCAT state

1 The OT_SUBNETWORK_CONNECTION event is generated only when CTM changes the SNC. If CTC or another tool is used to change the SNC, CTM does not report this event.

---

Note CTM does not generate state change event for EquipmentHolder and SubnetworkConnection for ONS 15501, ONS 15530, and ONS 15540 NEs.

---

A.3.5  Protection Switch

Table A-11 lists the protection switch types and attributes.

Table A-11 Protection Switch 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	No
ProtectionType	protection::ProtectionType_T	No
switchReason	protection::switchReason_T	No
layerRate	transmissionParameters::LayerRate_T	No
groupName	globaldefs::NamingAttributes_T	No (Yes for ONS 15530 and ONS 15540)
protectedTP	globaldefs::NamingAttributes_T	No (Yes for ONS 15530 and ONS 15540)
switchAwayFromTP	globaldefs::NamingAttributes_T	No (Yes for ONS 15530 and ONS 15540)
switchToTP	globaldefs::NamingAttributes_T	No (Yes for ONS 15530 and ONS 15540)
affectedTP (not defined by the TMF)	globaldefs::NamingAttributes_T	Yes (No for ONS 15530 and ONS 15540)
description (not defined by the TMF)	string	Yes. The value of this attribute is the native NE value.

A.3.6  Threshold Crossing Alert

Table A-12 lists the most commonly used TCAs.

Table A-12 Threshold Crossing Alert 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes
nativeEMSName	string	Yes
objectType	notifications::ObjectType_T	Yes
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	Yes
isClearable	boolean	Yes. The value is always set to False.
perceivedSeverity	notifications::PerceivedSeverity_T	Yes. The value is always set to PerceivedSeverity_T.PS_INDETERMINATE.
layerRate	transmissionParameters::LayerRate_T	Yes
granularity	Granularity_T	Yes
pmParameterName	PMParameterName_T	Yes. The value of this field is the native NE value. It is not TMF-compliant.
pmLocation	PMLocation_T	Yes Note If the NE does not report location, this field is empty.
thresholdType	PMThresholdType_T	No
value	float	Yes
unit	string	No

---

Note The TCA event is not supported for ONS 15501, ONS 15530, and ONS 15540 NEs because TCAs are reported as alarms.

---

A.3.7  Alarm

Table A-13 lists the most common alarm messages.

Table A-13 Alarm 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.
objectName	globaldefs::NamingAttributes_T	Yes
nativeEMSName	string	Yes
nativeProbableCause	Yes	Yes
objectType	notifications::ObjectType_T	Yes
emsTime	globaldefs::Time_T	Yes
neTime	globaldefs::Time_T	Yes
isClearable	boolean	Yes. The value is always set to True.
layerRate	transmissionParameters::LayerRate_T	Yes (not supported for ONS 15501, ONS 15530, or ONS 15540)
probableCause	string	Yes
probableCauseQualifier	string	Yes. CTM provides the same value as in the nativeProbableCause field.
perceivedSeverity	notifications::PerceivedSeverity_T	Yes
serviceAffecting	notifications::ServiceAffecting_T	Yes
affectedTPList	globaldefs::NamingAttributesList_T	Yes
additionalText	string	Yes
additionalInfo	globaldefs::NVSList_T	Yes CTM provides the Subnetwork name when available. If the alarmed object is OCn PTP, then CTM also includes SDH_SONET_SS_BITS in this list. CTM provides the IP address for ME-related alarms. CTM provides the ManagedElement Name when the object type is OT_EMS and the alarm is ME related. CTM provides affectedObject when the object type is OT_EMS and the nativeProbableCause is "Server Monitor Threshold Crossed."

---

Note If there is an alarm on an STS/VC4 CTP utilizing all the ports of a DS1/E1 card, such alarms will be reported with the containing PTP as port=127. If an STS/VC4 SNC exists with one of the drop CTPs of the SNC using all the ports on a DS1/E1 card and if there is an alarm on the STS CTP, then CTM will report the port number of the containing PTP as 127.

---

A.3.8  Heartbeat Event

CTM generates a periodic heartbeat event and pushes the event to the notification channel. By default, this function is disabled. You can configure the interval value through CTM Control Panel. If the interval value is set to 0, the heartbeat event is disabled. By monitoring this event, the NBI client knows whether the notification service is active. The type_name field contains the NT_HEART_BEAT value under the fixed_header for this type of event. Filterable_data has only one field, which is shown in Table A-14.

Table A-14 Heartbeat Event 

Attribute Name	Type	Supported by CTM?
notificationId	string	Yes. The uniqueness and sequence of the notificationID are not guaranteed.

A.4  Probable Cause Mapping

A.4.1  TMF-Defined Probable Cause

The following report lists the probable causes defined by the TMF:

"UNIDENTIFIED": for alarms that do not match any other string below. EMS shall in this 
case fill out the additional text field as much as possible.

"AIS": alarm indication signal

"AMS": Alternate modulation signal

"AU-AIS": AU alarm indication signal

"BER_SD": signal degrade (includes receiver degrade)

"BER_SF": signal fail (includes receiver failure and excessive BER)

"DCC_FAILURE" : Data Communication Channel Failure

"EMS": EMS system alarm

"EMS_ALM_LOSS": The 1st notification that the EMS may supply after 1 or more notifications 
for protection switch, TCA, alarm, or file transfer status have been discarded by the EMS 
while other events have not been discarded

"EMS_LIFECYCLE_LOSS": The 1st notification that an EMS may supply after 1 or more events 
of type OC/OD/AVC/SC/RC have been discarded by the EMS

"EMS_ALM_AND_LIFECYCLE_LOSS": The 1st notification that an EMS may supply after 1 or more 
notifications for protection switch, TCA, alarm, or file transfer status, and 1 or more 
events of type OC/OD/AVC/SC/RC have been discarded by the EMS

"EQPT": equipment alarm 

"ENV" Environmental/external cause

"FOP_APS": failure of APS protocol

"LCD": Loss of Cell Delineation (from TC Adaptor part of ATM NI)

"LOF": loss of frame (when distinguished from LOS)

"LOM": loss of multiframe (SDH only, since not an alarm in GR-253)

"LOP": loss of pointer

"LOS": loss of signal

"MS-AIS": MS alarm indication signal

"OSC-AIS" : Optical Supervisory Channel alarm indication signal

"OSC_BER_SF":Optical Supervisory Channel signal fail/RX fail/excessive BER

"OSC_FERF": Optical Supervisory Channel Far End Receive Failure

"OSC_LOF": Optical Supervisory Channel Loss of Frame

"OSC_LOS": Optical Supervisory Channel Loss of Signal

"OSC_SD": Optical Supervisory Channel signal degrade

"PLM": payload label mismatch (when reported as an alarm)

"RAI": remote alarm indication (sometimes reported as RDI)

"SECURITY_VIOLATION": security violation

"SSF": server signal fail 

"TCM-AIS": Tandem Connection Sink - Incoming Alarm Indication Signal

"TCM-LOS": Tandem Connection Sink - Loss of Tandem Connection Signal

"TCM-OAI": Tandem Connection Sink - Outgoing Defect Indication ( same / similar to Alarm 
Indication)

"TCM-RAI": Tandem Connection Sink - Remote Defect Indication ( same / similar to Alarm 
Indication)

"TCM-SD" Tandem Connection Sink - Signal Degrade

"TCM-SSF": Tandem Connection Sink - Server Signal Fail

"TCM-TIM" Connection Sink - Trace Identifier Mismatch

"TCM-UNEQ": Tandem Connection Sink - Unequipped

"TIM": trace identifier mismatch (when reported as an alarm)

"TU-AIS": TU alarm indication signal

"TX_DEGRADE": transmitter degrade, including laser degrade

"TX_FAIL": transmitter failure, including laser failure

"UAT": Unavailable Time

"UNEQ": payload unequipped

"VC-AIS": VCL/VCC TP Alarm Indication Signal

"VC-RDI": VCL/VCC TP Remote Defect Indication

"VP-AIS": VPL/VPC TP Alarm Indication Signal

"VP-RDI": VPL/VPC TP Remote Defect Indication

A.4.2  CTM GateWay/CORBA Mapping—EMS

Table A-15 lists the CTM GateWay/CORBA mapping for the EMS.

Table A-15 CTM GateWay/CORBA Mapping for the EMS 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
EMS	Loss of Communication	5001
EMS	Memory Auto or Manual Backup Failure	5002
SECURITY_VIOLATION	Maximum Login Attempts Exceeded	5003
EMS	Partition 0 Free Disk Space Low	5004
EMS	Partition 1 Free Disk Space Low	5005
EMS	Partition 2 Free Disk Space Low	5006
EMS	Partition 3 Free Disk Space Low	5007
EMS	Partition 4 Free Disk Space Low	5008
EMS	Partition 5 Free Disk Space Low	5009
EMS	Partition 6 Free Disk Space Low	5010
EMS	Alarm Resync Unsuccessful	5011
EMS	Server Monitor Threshold Crossed	5012

A.4.3  CTM GateWay/CORBA Mapping—ONS 15200

Table A-16 lists the CTM GateWay/CORBA mapping for ONS 15200.

Table A-16 CTM GateWay/CORBA Mapping for the ONS 15200 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported by GateWay/CORBA)
UNIDENTIFIED	Other	7000
EQPT	DwdmLOC Raised	7001
EQPT	Qpp Raised	7002
EQPT	QppA Raised	7003
EQPT	QppB Raised	7004
EQPT	Can Raised	7005
EQPT	FlashLog Raised	7006
EQPT	DAC Raised	7007
EQPT	Power Raised	7008
EQPT	Equipment Missing Raised	7009
UNIDENTIFIED	Summary Alarm Critical	7025
UNIDENTIFIED	Summary Alarm Major	7026
UNIDENTIFIED	Summary Alarm Minor	7027
UNIDENTIFIED	Summary Alarm Warning	7028
EQPT	Client Rx Power LowAlarm	7032
EQPT	Client Rx Power LowWarning	7033
EQPT	Client Rx Power HighWarning	7034
EQPT	Client Rx Power HighAlarm	7035
EQPT	Client Laser Bias Current LowAlarm	7042
EQPT	Client Laser Bias Current LowWarning	7043
EQPT	Client Laser Bias Current HighWarning	7044
EQPT	Client Laser Bias Current HighAlarm	7045
EQPT	Dwdm Rx Power LowAlarm	7052
EQPT	Dwdm Rx Power LowWarning	7053
EQPT	Dwdm Rx Power HighWarning	7054
EQPT	Dwdm Rx Power HighAlarm	7055
EQPT	Dwdm Rx Power SideA LowAlarm	7062
EQPT	Dwdm Rx Power SideA LowWarning	7063
EQPT	Dwdm Rx Power SideA HighWarning	7064
EQPT	Dwdm Rx Power SideA HighAlarm	7065
EQPT	Dwdm Rx Power SideB LowAlarm	7072
EQPT	Dwdm Rx Power SideB LowWarning	7073
EQPT	Dwdm Rx Power SideB HighWarning	7074
EQPT	Dwdm Rx Power SideB HighAlarm	7075
EQPT	Dwdm Laser Bias Current LowAlarm	7082
EQPT	Dwdm Laser Bias Current LowWarning	7083
EQPT	Dwdm Laser Bias Current HighWarning	7084
EQPT	Dwdm Laser Bias Current HighAlarm	7085
EQPT	Dwdm Laser Temperature LowAlarm	7092
EQPT	Dwdm Laser Temperature LowWarning	7093
EQPT	Dwdm Laser Temperature HighWarning	7094
EQPT	Dwdm Laser Temperature HighAlarm	7095
EQPT	Dwdm Peltier Current LowAlarm	7102
EQPT	Dwdm Peltier Current LowWarning	7103
EQPT	Dwdm Peltier Current HighWarning	7104
EQPT	Dwdm Peltier Current HighAlarm	7105
EQPT	Board Temperature LowAlarm	7112
EQPT	Board Temperature LowWarning	7113
EQPT	Board Temperature HighWarning	7114
EQPT	Board Temperature HighAlarm	7115

A.4.4  CTM GateWay/CORBA Mapping—ONS 15216

The ONS 15216 consists of the ONS 15216 Optical Add/Drop Multiplexer (OADM) and the ONS 15216 Erbium Doped Fiber Amplifier (EDFA2) for GateWay/CORBA mapping.

A.4.4.1  CTM GateWay/CORBA Mapping—ONS 15216 OADM

Table A-17 lists the CTM GateWay/CORBA mapping for the ONS 15216 OADM R2.0.

Table A-17 CTM GateWay/CORBA Mapping for the ONS 15216 OADM R2.0 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
LOS	Add Channel Signal Loss	8501
LOS	Drop Channel Signal Loss	8502
EQPT	Add and Drop Channels Are Out of Tolerance	8503
EQPT	Add Channel Signal Is Too Weak and VOA Cannot Adjust It To Match The Drop Signal	8504
EQPT	A_POWER Unit Failed	8505
EQPT	B_POWER Unit Failed	8506

A.4.4.2  CTM GateWay/CORBA Mapping—ONS 15216 EDFA2

Table A-18 lists the CTM GateWay/CORBA mapping for the ONS 15216 EDFA2 R2.2.1, R2.3, and R2.4.

Table A-18 CTM GateWay/CORBA Mapping for the ONS 15216 EFDA2 R2.2.1,
R2.3, and 2.4 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	Unknown Alarm	8601
EQPT	Excessive Pump1 Current	8602
EQPT	Excessive Pump2 Current	8603
EQPT	Excessive Pump1 Laser Temperature	8604
EQPT	Excessive Pump2 Laser Temperature	8605
EQPT	Loss of Output Power	8606
EQPT	Loss of Input Power	8607
EQPT	Gain Out of Range	8608
EQPT	Case Temperature Out of Range	8609
EQPT	A_POWER Unit Failed	8610
EQPT	B_POWER Unit Failed	8611
EQPT	Database Backup	8612
EQPT	Database Restore	8613
EQPT	Cutover Reset	8614
EQPT	Software Load	8615
EQPT	Software Reset	8616

Table A-19 lists the CTM GateWay/CORBA mapping for the ONS 15216 EDFA3 1.1.

Table A-19 CTM GateWay/CORBA Mapping for the ONS 15216 EFDA3 R1.1 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported in the Notification)
UNIDENTIFIED	UnknownAlarm	8701
EQPT	Gain Degrade High	8702
EQPT	Gain Degrade Low	8703
EQPT	Laser 1 Bias Degrade	8704
EQPT	Laser 2 Bias Degrade	8705
EQPT	Laser 1 Bias Fail	8706
EQPT	Laser 2 Bias Fail	8707
EQPT	Power Degrade High LINE1TX Port	8708
EQPT	Power Degrade Low LINE1TX Port	8709
EQPT	Power Fail Low LINE1RX Port	8710
EQPT	Power Fail Low LINE1TX Port	8711
EQPT	Power Fail Low LINE2RX Port	8712
EQPT	VOA Degrade High	8713
EQPT	VOA Degrade Low	8714
EQPT	VOA Fail High	8715
EQPT	Case Temperature Out of Range	8716
EQPT	Fiber Temperature Out of Range	8717
EQPT	Excessive Pump 1 Temperature	8718
EQPT	Excessive Pump 2 Temperature	8719
EQPT	Backup/Restore In Progress	8720
EQPT	Data Integrity Fault	8721
EQPT	Equipment Failure	8722
EQPT	Exceeding Memory Capacity	8723
EQPT	Exceeding Flash File System Capacity	8724
EQPT	Module Communication Failure	8725
EQPT	Power Bus A Alarm	8726
EQPT	Power Bus B Alarm	8727

A.4.5  CTM GateWay/CORBA Mapping—ONS 15302 and ONS 15305

Table A-20 lists the CTM GateWay/CORBA mapping for the ONS 15302 and ONS 15305.

Table A-20 CTM GateWay/CORBA Mapping for the ONS 15302 and ONS 15305 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported by GateWay/CORBA)
UNIDENTIFIED	ONS1530x Condition Unknown	19000
AIS	Alarm indication signal	19001
AIS	Alarm indication signal network side	19002
LOF	Alarm indication signal customer side	19003
LOF	Loss of frame alignment	19004
LOF	Loss of frame alignment network side	19005
LOF	Loss of frame alignment customer side	19006
LOP	Loss of pointer	19007
LOS	Loss of signal	19008
BER_SD	Degraded signal defect	19009
LOM	Loss of multiframe alignment	19010
RAI	Remote defect indication	19011
TIM	Trace identifier mismatch	19012
PLM	Payload mismatch	19013
UNEQ	Unequipped	19014
BER_SF	Excessive error defect	19015
UNIDENTIFIED	Communication subsystem failure	19016
SSF	Server signal failure	19017
UNIDENTIFIED	Alarm condition detected on an alarm input port	19018
EQPT	Device main unit failure	19019
EQPT	High temperature alarm	19020
EQPT	Fan failure	19021
EQPT	Power input failure	19022
EQPT	Power output failure	19023
EQPT	Module mismatch	19024
EQPT	Module removed	19025
EQPT	Module failure	19026
UNIDENTIFIED	MSP signalling problem	19027
UNIDENTIFIED	Power module failure	19028
UNIDENTIFIED	LAN port is not working	19029
UNIDENTIFIED	WAN port is not working	19030
UNIDENTIFIED	Too large delay on WAN channel	19031
UNIDENTIFIED	Sequence number fail on WAN channel	19032
UNIDENTIFIED	No sync. source available	19033
UNIDENTIFIED	Defecting HW impacting internal T0 clock	19034
UNIDENTIFIED	No T4 sync. src available with QL >= QL min	19035
UNIDENTIFIED	Inventory failure	19036
UNIDENTIFIED	Diagnostic failure	19037
UNIDENTIFIED	DXC inlet failure	19038
UNIDENTIFIED	DXC inlet bit error	19039
UNIDENTIFIED	Card isolated	19040
UNIDENTIFIED	Card anomaly	19041
UNIDENTIFIED	Hot swap failure	19042
UNIDENTIFIED	Power input failure	19043
UNIDENTIFIED	Transmit degrade on laser	19044
UNIDENTIFIED	Transmit fail on laser	19045
UNIDENTIFIED	Port activated without mapping to an available VC-12	19046
UNIDENTIFIED	Differential VC12 delay for the WAN port is greater than +/- 2ms	19047
UNIDENTIFIED	Rx buffer overflow in LAN or link interface	19048
UNIDENTIFIED	Interport queue overflow in LAN or link interface	19049
UNIDENTIFIED	Reset of the router/bridge required	19050
UNIDENTIFIED	Device aborted FTP session	19051
UNIDENTIFIED	Automatic switchover to backup link. Main link fault.	19052
UNIDENTIFIED	Overflow Layer 2 forward table	19053
UNIDENTIFIED	Connection failed: Frame Relay Switch and WanGate	19054
UNIDENTIFIED	Connection established: Frame Relay Switch and WanGate	19055
UNIDENTIFIED	Error occurred during initialization	19056
UNIDENTIFIED	Overflow in the client table	19057
UNIDENTIFIED	Server not responding to dispatcher polling	19058
UNIDENTIFIED	SNMP SET request was rejected	19059
UNIDENTIFIED	Ping sequence completed	19060
UNIDENTIFIED	Backup taken over for main server or server up after failure	19061
UNIDENTIFIED	DHCP failed to allocate IP address to requesting host	19062
UNIDENTIFIED	Overflow IGMP table	19063
UNIDENTIFIED	Overflow PIM Table	19064
UNIDENTIFIED	Overflow condition in Routing Table	19065
UNIDENTIFIED	OpenGate IPX RIP table overflow	19066
UNIDENTIFIED	OpenGate IPX SAP table overflow	19067
UNIDENTIFIED	FACS state ne bt with operation blockAndReport	19068
UNIDENTIFIED	Zero Hop Routing connections table overflow	19069
UNIDENTIFIED	No available IP virtual address	19070
UNIDENTIFIED	Virtual IP address appeared as a source IP	19071
UNIDENTIFIED	Source IP address sent an ARP specifying a virtual IP	19072
UNIDENTIFIED	PPP link got an unrecognized secret	19073
UNIDENTIFIED	FR DLCI status change	19074
UNIDENTIFIED	CHAP failed communication	19075
UNIDENTIFIED	IP SFFT overflow	19076
UNIDENTIFIED	IP NFFT overflow	19077
UNIDENTIFIED	IPX SFFT overflow	19078
UNIDENTIFIED	IPX NFFT overflow	19079
UNIDENTIFIED	IPM FFT overflow	19080
UNIDENTIFIED	PAP failed communication	19081
UNIDENTIFIED	Automatic switchover to backup link. Main link fault.	19082
UNIDENTIFIED	Informational event	19083
UNIDENTIFIED	t0SyncSwitch	19084
UNIDENTIFIED	t0QIFailed	19085
UNIDENTIFIED	t0QIDnu	19086
UNIDENTIFIED	switchToProt	19087
UNIDENTIFIED	switchToWork	19088
UNIDENTIFIED	mspComTimeOut	19089
UNIDENTIFIED	mspComOverruled	19090
UNIDENTIFIED	loop Closed	19091
UNIDENTIFIED	loop Opened	19092
UNIDENTIFIED	link Up	19093
UNIDENTIFIED	link Down	19094
UNIDENTIFIED	The communication link has come up.	19095
UNIDENTIFIED	Failure in communication link	19096
UNIDENTIFIED	Addressee of a protocol message not properly authenticated	19097
UNIDENTIFIED	Reinitializing. Configuration or the protocol entity implementation may be altered.	19098
UNIDENTIFIED	Reinitializing. Neither configuration nor protocol entity implementation altered.	19099
UNIDENTIFIED	RMON alarm has crossed the rising threshold	19100
UNIDENTIFIED	RMON alarm has crossed the falling threshold	19101
UNIDENTIFIED	Loss of an adjacency with a PIM neighbor	19102
UNIDENTIFIED	Device finished TFTP transaction	19103
UNIDENTIFIED	Device initiated TFTP transaction	19104
UNIDENTIFIED	Auto configuration completed successfully	19105
UNIDENTIFIED	VLAN port dynamically added	19106
UNIDENTIFIED	VLAN port dynamically changed	19107
UNIDENTIFIED	Physical description device changed	19108
UNIDENTIFIED	Port transition from learning to forwarding	19109
UNIDENTIFIED	Port transition from forwarding to learning	19110
UNIDENTIFIED	Packet drop due to the QoS policy	19111
UNIDENTIFIED	Packet forwarded based on the QoS policy	19112
UNIDENTIFIED	Protection Link Activated	19113
UNIDENTIFIED	Working Link Activated	19114
UNIDENTIFIED	MSP Command timeout	19115
UNIDENTIFIED	MSP Command Overruled	19116
UNIDENTIFIED	Loss of External Synchronization	19117
UNIDENTIFIED	ONS1530x Condition Unknown	19999

A.4.6  CTM GateWay/CORBA Mapping—ONS 15327

Table A-21 lists the CTM GateWay/CORBA mapping for the ONS 15327 R3.4.1

Table A-21 CTM GateWay/CORBA Mapping for the ONS 15327 R3.4.1 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported by GateWay/CORBA)
UNIDENTIFIED	Normal condition	2500
ENV	Failure Detected External to the NE	2501
ENV	External Error	2502
UNIDENTIFIED	Excessive Switching	2503
UNIDENTIFIED	Incoming failure condition	2504
AIS	Alarm Indication Signal	2505
AIS	Alarm Indication Signal - Line	2506
AIS	Alarm Indication Signal - Path	2507
FOP_APS	APS Channel failure	2508
FOP_APS	Byte failure	2509
FOP_APS	Protection Switching Channel Match failure	2510
FOP_APS	Automatic Protection Switch Mode Mismatch	2511
FOP_APS	Far End Protection Line Failure	2512
UNIDENTIFIED	Bipolar Violation	2513
UNIDENTIFIED	Carrier Loss on the LAN	2514
UNIDENTIFIED	STS Concatenation error	2515
UNIDENTIFIED	Excess collisions on the LAN	2516
UNIDENTIFIED	Facility failure	2517
UNIDENTIFIED	Far End Block Error	2518
LOF	Loss of Frame	2519
LOP	Loss of Pointer	2520
LOP	Loss of Pointer - Path	2521
LOS	Loss of Signal	2522
UNIDENTIFIED	Out of Frame	2523
UNIDENTIFIED	Path Selector failure	2524
RAI	Remote Alarm Indication	2525
RAI	Remote Failure Indication	2526
RAI	Remote Failure Indication - Line	2527
RAI	Remote Failure Indication - Path	2528
BER_SD	Signal Degrade	2529
UNIDENTIFIED	Severely Errored Frame	2530
UNIDENTIFIED	NA	2531
BER_SF	Signal Failure	2532
UNIDENTIFIED	Signal Label Mismatch Failures	2533
UNIDENTIFIED	Payload Defect Indication	2534
UNIDENTIFIED	Payload Defect Indication - Path	2535
PLM	Payload Label Mismatch - Path	2536
UNEQ	Unequipped - Path	2537
UNIDENTIFIED	Loss of Synchronization	2538
UNIDENTIFIED	Out of Synchronization	2539
UNIDENTIFIED	Primary Synchronization Reference Failure	2540
UNIDENTIFIED	Secondary Synchronization Reference Failure	2541
UNIDENTIFIED	Third Synchronization Reference Failure	2542
UNIDENTIFIED	Fourth Synchronization Reference Failure	2543
UNIDENTIFIED	Fifth Synchronization Reference Failure	2544
UNIDENTIFIED	Sixth Synchronization Reference Failure	2545
UNIDENTIFIED	Outgoing failure condition	2546
RAI	Remote Defect Indication - Line	2547
RAI	Remote Defect Indication - Path	2548
UNIDENTIFIED	Free Running Synchronization Mode	2549
UNIDENTIFIED	Holdover Synchronization Mode	2550
EQPT	Internal Fault	2551
UNIDENTIFIED	Internal Error	2552
UNIDENTIFIED	Internal Message Error	2553
UNIDENTIFIED	Mismatch of Equipment and Attributes	2554
UNIDENTIFIED	Watchdog Timer Timeout	2555
ENV	Software Fault or Failure	2556
ENV	Software Fault - Data Integrity Fault (database full)	2557
UNIDENTIFIED	Program failure	2558
EQPT	Control Equipment Failure	2559
EQPT	Control Processor Failure	2560
EQPT	Working Memory Failure	2561
EQPT	Interconnection Equipment Failure	2562
EQPT	Time slot interchange equipment failure	2563
EQPT	Equipment failure	2564
EQPT	High temperature	2565
EQPT	Facility Termination equipment failure	2566
EQPT	Automatic Laser Shutdown	2567
UNIDENTIFIED	Failure To Release from protection	2568
EQPT	Receiver failure	2569
EQPT	Transmit failure	2570
UNIDENTIFIED	Failure To Switch to protection	2571
UNIDENTIFIED	Equipment unit plug-in	2572
UNIDENTIFIED	Internal power failure	2573
UNIDENTIFIED	Fuse Alarm	2574
UNIDENTIFIED	Synchronization unit failure	2575
UNIDENTIFIED	Synchronization switching equipment failure	2576
EQPT	Equipment unit un-plugged	2577
EQPT	Manually caused abnormal condition	2578
UNIDENTIFIED	Manual alarm cutoff	2579
UNIDENTIFIED	Procedural Error	2580
EQPT	Improper Removal	2581
UNIDENTIFIED	Protection unit not available	2582
UNIDENTIFIED	Protection switch	2583
UNIDENTIFIED	Recovery or service protection action has been initiated	2584
UNIDENTIFIED	Automatic system reset	2585
UNIDENTIFIED	Cold Restart	2586
UNIDENTIFIED	Forced switch back to working	2587
UNIDENTIFIED	Forced switch to protection	2588
UNIDENTIFIED	Initialization initiated	2589
UNIDENTIFIED	Lockout of protection	2590
UNIDENTIFIED	Lockout of working	2591
UNIDENTIFIED	Manual system reset	2592
UNIDENTIFIED	Manual switch to internal clock	2593
UNIDENTIFIED	Manual switch to primary reference	2594
UNIDENTIFIED	Manual switch to second reference	2595
UNIDENTIFIED	Manual switch to third reference	2596
UNIDENTIFIED	Manual switch to fourth reference	2597
UNIDENTIFIED	Manual switch to fifth reference	2598
UNIDENTIFIED	Manual switch to sixth reference	2599
UNIDENTIFIED	Manual switch back to working	2600
UNIDENTIFIED	Manual switch to protection	2601
UNIDENTIFIED	Powerfail restart	2602
UNIDENTIFIED	Software download in progress	2603
UNIDENTIFIED	Switch to internal clock	2604
UNIDENTIFIED	Switch to primary reference	2605
UNIDENTIFIED	Switch to second reference	2606
UNIDENTIFIED	Switch to third reference	2607
UNIDENTIFIED	Switch to fourth reference	2608
UNIDENTIFIED	Switch to fifth reference	2609
UNIDENTIFIED	Switch to sixth reference	2610
UNIDENTIFIED	Switched back to working unit	2611
UNIDENTIFIED	Switched to protection	2612
UNIDENTIFIED	Warm restart	2613
UNIDENTIFIED	Ring is in Wait To Restore state	2614
EQPT	Primary nonvolatile backup memory failure	2615
EQPT	Secondary nonvolatile backup memory failure	2616
EQPT	Control bus failure	2617
EQPT	Control communication equipment failure	2618
UNIDENTIFIED	Loopback	2619
UNIDENTIFIED	Loopback, Network	2620
UNIDENTIFIED	Loopback, Terminal	2621
EQPT	Fan Failure	2622
DCC_FAILURE	SDCC termination failure	2623
UNIDENTIFIED	Loopback facility	2624
EQPT	Payload Bus Failure to I/O Slot 1 (XCON Slot 8)	2625
EQPT	Payload Bus Failure to I/O Slot 2 (XCON Slot 8)	2626
EQPT	Payload Bus Failure to I/O Slot 3 (XCON Slot 8)	2627
EQPT	Payload Bus Failure to I/O Slot 4 (XCON Slot 8)	2628
EQPT	Payload Bus Failure to I/O Slot 5 (XCON Slot 8)	2629
EQPT	Payload Bus Failure to I/O Slot 6 (XCON Slot 8)	2630
EQPT	Payload Bus Failure to I/O Slot 12 (XCON Slot 8)	2631
EQPT	Payload Bus Failure to I/O Slot 13 (XCON Slot 8)	2632
EQPT	Payload Bus Failure to I/O Slot 14 (XCON Slot 8)	2633
EQPT	Payload Bus Failure to I/O Slot 15 (XCON Slot 8)	2634
EQPT	Payload Bus Failure to I/O Slot 16 (XCON Slot 8)	2635
EQPT	Payload Bus Failure to I/O Slot 17 (XCON Slot 8)	2636
EQPT	Payload Bus Failure to I/O Slot 1 (XCON Slot 10)	2637
EQPT	Payload Bus Failure to I/O Slot 2 (XCON Slot 10)	2638
EQPT	Payload Bus Failure to I/O Slot 3 (XCON Slot 10)	2639
EQPT	Payload Bus Failure to I/O Slot 4 (XCON Slot 10)	2640
EQPT	Payload Bus Failure to I/O Slot 5 (XCON Slot 10)	2641
EQPT	Payload Bus Failure to I/O Slot 6 (XCON Slot 10)	2642
EQPT	Payload Bus Failure to I/O Slot 12 (XCON Slot 10)	2643
EQPT	Payload Bus Failure to I/O Slot 13 (XCON Slot 10)	2644
EQPT	Payload Bus Failure to I/O Slot 14 (XCON Slot 10)	2645
EQPT	Payload Bus Failure to I/O Slot 15 (XCON Slot 10)	2646
EQPT	Payload Bus Failure to I/O Slot 16 (XCON Slot 10)	2647
EQPT	Payload Bus Failure to I/O Slot 17 (XCON Slot 10)	2648
EQPT	Control Bus 1 failure	2649
EQPT	Control Bus 2 failure	2650
EQPT	Invalid MAC Address	2651
EQPT	Board Failure	2652
EQPT	Diagnostics Failure	2653
EQPT	Medium Access Control Failure	2654
UNIDENTIFIED	Duplicate Node ID	2655
UNIDENTIFIED	Failure To Switch to protection - Ring	2656
UNIDENTIFIED	Failure To Switch to protection - Span	2657
UNIDENTIFIED	Manual Switch Back to Working - Ring	2658
UNIDENTIFIED	Manual Switch Back to Working - Span	2659
UNIDENTIFIED	Manual Switch to Protection - Ring	2660
UNIDENTIFIED	Manual Switch to Protection - Span	2661
UNIDENTIFIED	Forced switch back to working - Ring	2662
UNIDENTIFIED	Forced switch back to working - Span	2663
UNIDENTIFIED	Forced switch to protection unit - Ring	2664
UNIDENTIFIED	Forced switch to protection unit - Span	2665
UNIDENTIFIED	Lockout of Protection - Ring	2666
UNIDENTIFIED	Lockout of Protection - Span	2667
UNIDENTIFIED	Lockout of working - Ring	2668
UNIDENTIFIED	Lockout of working - Span	2669
UNIDENTIFIED	Ring is squelching traffic	2670
FOP_APS	Inconsistent APS code	2671
FOP_APS	Node ID Mismatch	2672
FOP_APS	Default K Byte	2673
FOP_APS	Connection loss	2674
EQPT	TCC A To Shelf SLOT 1 (DROP 1) communication failure	2675
EQPT	TCC A To Shelf SLOT 2 (DROP 2) communication failure	2676
EQPT	TCC A To Shelf SLOT 3 (DROP 3) communication failure	2677
EQPT	TCC A To Shelf SLOT 4 (DROP 4) communication failure	2678
EQPT	TCC A To Shelf SLOT 5 (TRUNK 1) communication failure	2679
EQPT	TCC A To Shelf SLOT 6 (TRUNK 2) communication failure	2680
EQPT	TCC A To Shelf SLOT 7 (TCC A) communication failure	2681
EQPT	TCC A To Shelf SLOT 8 (XCON A) communication failure	2682
EQPT	TCC A To Shelf SLOT 9 (AIC) communication failure	2683
EQPT	TCC A To Shelf SLOT 10 (XCON B) communication failure	2684
EQPT	TCC A To Shelf SLOT 11 (TCC B) communication failure	2685
EQPT	TCC A To Shelf SLOT 12 (TRUNK 3) communication failure	2686
EQPT	TCC A To Shelf SLOT 13 (TRUNK 4) communication failure	2687
EQPT	TCC A To Shelf SLOT 14 (DROP 5) communication failure	2688
EQPT	TCC A To Shelf SLOT 15 (DROP 6) communication failure	2689
EQPT	TCC A To Shelf SLOT 16 (DROP 7) communication failure	2690
EQPT	TCC A To Shelf SLOT 17 (DROP 8) communication failure	2691
EQPT	TCC A To DCC A Processor Communication Failure	2692
EQPT	TCC B To Shelf SLOT 1 (DROP 1) communication failure	2693
EQPT	TCC B To Shelf SLOT 2 (DROP 2) communication failure	2694
EQPT	TCC B To Shelf SLOT 3 (DROP 3) communication failure	2695
EQPT	TCC B To Shelf SLOT 4 (DROP 4) communication failure	2696
EQPT	TCC B To Shelf SLOT 5 (TRUNK 1) communication failure	2697
EQPT	TCC B To Shelf SLOT 6 (TRUNK 2) communication failure	2698
EQPT	TCC B To Shelf SLOT 7 (TCC A) communication failure	2699
EQPT	TCC B To Shelf SLOT 8 (XCON A) communication failure	2700
EQPT	TCC B To Shelf SLOT 9 (AIC) communication failure	2701
EQPT	TCC B To Shelf SLOT 10 (XCON B) communication failure	2702
EQPT	TCC B To Shelf SLOT 11 (TCC B) communication failure	2703
EQPT	TCC B To Shelf SLOT 12 (TRUNK 3) communication failure	2704
EQPT	TCC B To Shelf SLOT 13 (TRUNK 4) communication failure	2705
EQPT	TCC B To Shelf SLOT 14 (DROP 5) communication failure	2706
EQPT	TCC B To Shelf SLOT 15 (DROP 6) communication failure	2707
EQPT	TCC B To Shelf SLOT 16 (DROP 7) communication failure	2708
EQPT	TCC B To Shelf SLOT 17 (DROP 8) communication failure	2709
EQPT	TCC B To DCC B Processor Communication Failure	2710
UNIDENTIFIED	Fast start synchronization mode	2711
FOR_APS	Improper APS Code	2712
UNIDENTIFIED	BLSR Out of Sync	2713
AIS	Alarm Indication Signal - VT	2714
RAI	Remote Failure Indication - VT	2715
PLM	SLMF - Payload Label Mismatch - VT	2716
UNEQ	SLMF - Unequipped - VT	2717
UNIDENTIFIED	Peer state mismatch	2718
EQPT	Facility Termination equipment - Receiver missing	2719
EQPT	Facility Termination equipment - Transmitter missing	2720
LOP	Loss of Pointer - VT	2721
UNIDENTIFIED	Embedded Operations Channel failure - link down	2722
UNIDENTIFIED	Failed to receive Synchronization Status Message	2723
UNIDENTIFIED	Synchronization Status Messages are disabled on this interface	2724
UNIDENTIFIED	Primary Reference Source - Stratum 1 Traceable	2725
UNIDENTIFIED	Synchronized - Traceability Unknown	2726
UNIDENTIFIED	Stratum 2 Traceable	2727
UNIDENTIFIED	Transit Node Clock Traceable	2728
UNIDENTIFIED	Stratum 3E Traceable	2729
UNIDENTIFIED	Stratum 3 Traceable	2730
UNIDENTIFIED	SONET Minimum Clock Traceable	2731
UNIDENTIFIED	Stratum 4 Traceable	2732
UNIDENTIFIED	Do not Use for Synchronization	2733
UNIDENTIFIED	Reserved for Network Synchronization Use	2734
UNIDENTIFIED	Failure to Switch to protection - Path	2735
UNIDENTIFIED	Manual Switch of working facility/equipment to Protection - Path	2736
UNIDENTIFIED	Working facility/equipment forced to switch to protection unit - Path	2737
UNIDENTIFIED	Lockout of Protection - Path	2738
UNIDENTIFIED	Automatic UPSR switch caused by AIS	2739
UNIDENTIFIED	Automatic UPSR switch caused by LOP	2740
UNIDENTIFIED	Automatic UPSR switch caused by UNEQ	2741
UNIDENTIFIED	Automatic UPSR switch caused by PDI	2742
UNIDENTIFIED	Automatic UPSR switch caused by SFBER	2743
UNIDENTIFIED	Automatic UPSR switch caused by SDBER	2744
UNIDENTIFIED	DS3 Idle Condition	2745
UNIDENTIFIED	DS1 loopback due to FEAC command	2746
UNIDENTIFIED	DS1 loopback Command sent to Far End	2747
UNIDENTIFIED	DS3 loopback due to FEAC command	2748
UNIDENTIFIED	DS3 loopback Command sent to Far End	2749
UNIDENTIFIED	DS2 loopback due to Far End Command	2750
UNIDENTIFIED	DS2 loopback Command sent to Far End	2751
ENV	Far end AIS	2752
UNIDENTIFIED	Far end Multiple DS1 LOS detected on DS3	2753
ENV	Far end DS1 equipment fail nonservice affecting	2754
ENV	Far end DS1 equipment fail service affecting	2755
ENV	Far end Single Ds1 LOS	2756
ENV	Far end DS3 equipment failure nonservice affecting	2757
ENV	Far end DS3 equipment failure service affecting	2758
ENV	Far end common equipment failure nonservice affecting	2759
UNIDENTIFIED	Far end IDLE	2760
ENV	Far end LOS	2761
ENV	Far end LOF	2762
UNIDENTIFIED	Performance Monitor Threshold Crossing Alert	2763
UNIDENTIFIED	Ethernet Bridge is New Root of spanning tree	2764
UNIDENTIFIED	Ethernet Bridge Topology Change	2765
UNIDENTIFIED	BLSR tables resynchronized	2766
ENV	System reboot	2767
UNIDENTIFIED	Manual switch request on facility/equipment	2768
UNIDENTIFIED	Forced switch request on facility/equipment	2769
UNIDENTIFIED	Lockout switch request on facility/equipment	2770
UNIDENTIFIED	RMON Histories and Alarms Reset Reboot	2771
UNIDENTIFIED	RMON Alarm	2772
LOS	Video Interface Card Loss of Video IF signal	2773
LOS	VIC loss of Video Base Band Signal	2774
LOS	VIC loss of Audio FM signal	2775
LOS	VIC loss of audio base band channel 1 signal	2776
LOS	VIC loss of audio base band channel 2 signal	2777
LOS	VIC loss of audio base band channel 3 signal	2778
LOS	VIC loss of audio base band channel 4 signal	2779
TIM	STS path trace identifier mismatch	2780
ENV	NE Power Failure at connector A	2781
ENV	NE Power Failure at connector B	2782
UNIDENTIFIED	Free memory on card very low	2783
UNIDENTIFIED	Free memory on card almost zero	2784
UNIDENTIFIED	Exercise request on Ring	2785
UNIDENTIFIED	Exercise request on Span	2786
UNIDENTIFIED	Squelching - Path Level	2787
UNIDENTIFIED	Extra Traffic Preempted	2788
UNIDENTIFIED	Far End Lockout of working - Ring	2789
UNIDENTIFIED	Far End Lockout of working - Span	2790
UNIDENTIFIED	Far End Lockout of Protection - Ring	2791
UNIDENTIFIED	Far End Lockout of Protection - All Spans	2792
UNIDENTIFIED	Far End Working facility forced to switch to protect - Ring	2793
UNIDENTIFIED	Far End Working facility forced to switch to protect - Span	2794
UNIDENTIFIED	Far End Manual Switch of Working facility to Protect - Ring	2795
UNIDENTIFIED	Far End Manual Switch of Working facility to Protect - Span	2796
UNIDENTIFIED	Far End Exercise Ring	2797
UNIDENTIFIED	Far End Exercise Span	2798
ENV	Far End BER threshold passed for Signal Failure - Ring	2799
ENV	Far End BER threshold passed for Signal Failure - Span	2800
ENV	Far End BER threshold passed for Signal Degrade - Ring	2801
ENV	Far End BER threshold passed for Signal Degrade - Span	2802
ENV	APS Channel - Far End Protection Line Signal Degrade	2803
UNIDENTIFIED	Ring Switch is active on the East Side	2804
UNIDENTIFIED	Ring Switch is active on the West Side	2805
UNIDENTIFIED	Span Switch is active on the East Side	2806
UNIDENTIFIED	Span Switch is active on the West Side	2807
UNIDENTIFIED	Unidirectional Full Pass Through is active	2808
UNIDENTIFIED	Bidirectional Full Pass Through is active	2809
UNIDENTIFIED	K Bytes Pass Through is active	2810
UNIDENTIFIED	Ring is Segmented	2811
UNIDENTIFIED	Ring Topology is under construction	2812
UNIDENTIFIED	Lockout of Protection - All Spans	2813
UNIDENTIFIED	Far end of fiber is provisioned with different ring ID	2814
UNIDENTIFIED	Both ends of fiber provisioned as East, or both as West	2815
SECURITY_VIOLATION	Security - invalid login (see Audit Trail)	2816
UNIDENTIFIED	Autonomous messages inhibited	2817
UNIDENTIFIED	Traffic storm on LAN; LAN temporarily disabled	2818
UNIDENTIFIED	REPT^DBCHG messages inhibited	2819
SECURITY_VIOLATION	Security- user ID has expired	2820
EQPT	Partial Fan Failure	2821
UNIDENTIFIED	Force switch request on Ring	2822
UNIDENTIFIED	Force switch request on Span	2823
UNIDENTIFIED	Lockout switch request on Ring	2824
UNIDENTIFIED	Lockout switch request on Span	2825
UNIDENTIFIED	Manual switch request on Ring	2826
UNIDENTIFIED	Manual switch request on Span	2827
EQPT	Peer-to-Peer Slot communication failure	2828
EQPT	Peer-to-Peer Slot communication failure	2829
EQPT	TCC A to Shelf Slot communication failure	2830
EQPT	TCC B to Shelf Slot communication failure	2831
EQPT	Interconnection Equipment Failure - Working XC Payload Bus	2832
EQPT	Interconnection Equipment Failure - Protect Payload Bus	2833
EQPT	Inhibit Switch to Protect Request on equipment	2834
EQPT	Inhibit Switch to Working Request on equipment	2835
BER_SD	BER Threshold exceeded for Signal Degrade - Line	2836
BER_SD	BER Threshold exceeded for Signal Degrade - Path	2837
BER_SF	BER Threshold exceeded for Signal Failure - Line	2838
BER_SF	BER Threshold exceeded for Signal Failure - Path	2839
UNIDENTIFIED	Exercising Ring Successfully	2840
UNIDENTIFIED	Exercising Span Successfully	2841
UNIDENTIFIED	Span is in Wait To Restore state	2842
EQPT	Peer Card Not Responding	2843
UNIDENTIFIED	Exercise Request on Ring Failed	2844
UNIDENTIFIED	Exercise Request on Span Failed	2845
UNIDENTIFIED	Far End Lockout Of Protection - Span	2846
EQPT	Manufacturing Data Memory (EEPROM) Failure	2847
EQPT	Replaceable Equipment/Unit is Missing	2848
ENV	Software Download Failure	2849
TIM	TIM Regeneration Section - Trace Identifier Mismatch Failure	2850
AIS	AIS - Multiplex Section - Alarm Indication Signal	2851
RAI	RFI - Multiplex Section - Remote Failure/Alarm Indication	2852
TIM	TIM High Order- Trace Identifier Mismatch Failure	2853
AU_AIS	AIS - Administration Unit - Alarm Indication Signal	2854
LOP	LOP - Administration Unit - Loss of Pointer	2855
UNEQ	SLMF - Unequipped High Order - Path Unequipped	2856
PLM	SLMF - PLM High Order - Path Label Mismatch	2857
RAI	RFI - High Order - Remote Failure/Alarm Indication	2858
LOP	LOP - Tributary Unit - Loss of Pointer	2859
TU_AIS	AIS - Tributary Unit - Alarm Indication Signal	2860
UNEQ	SLMF - Unequipped Low Order - Path Unequipped	2861
PLM	SLMF - PLM Low Order - Path Label Mismatch	2862
TIM	TIM Low Order - Trace Identifier Mismatch Failure	2863
RAI	RFI - Low Order - Remote Failure/Alarm Indication	2864
UNIDENTIFIED	G811 - Primary Reference Clock traceable	2865
UNIDENTIFIED	G812 - Transit Node Clock traceable	2866
UNIDENTIFIED	G812 - Local Node Clock traceable	2867
UNIDENTIFIED	G813 - Synchronous Equipment Timing Source traceable	2868
UNIDENTIFIED	E1 loopback due to FEAC command	2869
UNIDENTIFIED	E1 loopback command sent to Far End	2870
UNIDENTIFIED	E3 loopback due to FEAC command	2871
ENV	Far end multiple E1 LOS detected on E3	2872
ENV	Far end E1 eqpt fail non service affecting	2873
ENV	Far end E1 eqpt fail service affecting	2874
ENV	Far end Single E1 LOS	2875
ENV	Far end E3 eqpt fail service affecting	2876
UNIDENTIFIED	E3 loopback command sent to far end	2877
ENV	Far end E3 eqpt fail non service affecting	2878
ENV	Low Volt - Battery A	2879
ENV	High Volt - Battery A	2880
ENV	Low Volt - Battery B	2881
ENV	High Volt - Battery B	2882
UNIDENTIFIED	Procedural Error - MS-SP Ring out of sync	2883
UNIDENTIFIED	MS-SP Ring tables resynchronized	2884
UNIDENTIFIED	Automatic SNCP Switch caused by AIS	2885
UNIDENTIFIED	Automatic SNCP Switch caused by LOP	2886
UNIDENTIFIED	Automatic SNCP Switch caused by UNEQ	2887
UNIDENTIFIED	Automatic SNCP Switch caused by PDI	2888
UNIDENTIFIED	Automatic SNCP Switch caused by SFBER	2889
UNIDENTIFIED	Automatic SNCP Switch caused by SDBER	2890
UNIDENTIFIED	STM Concatenation error	2891
UNIDENTIFIED	E3 Idle Condition	2892
FOP_APS	Inconsistent APS code (MS-SPRing)	2893
FOP_APS	Improper APS code (MS-SPRing)	2894
FOP_APS	Node ID Mismatch (MS-SPRing)	2895
FOP_APS	Default K Byte (MS-SPRing)	2896
FOP_APS	Connection loss (MS-SPRing)	2897
UNIDENTIFIED	SDH Minimum Clock Traceable	2898
UNIDENTIFIED	SDH line is in Wait To Restore state	2899
UNIDENTIFIED	Alarms Suppressed for Maintenance	2900
UNIDENTIFIED	NA	2901
UNIDENTIFIED	Synchronization Reference Frequency Out Of Bounds	2902
UNIDENTIFIED	Ether tx excess flow ctrl	2903
UNIDENTIFIED	Ether tx oversubscribed	2904
UNIDENTIFIED	Transport layer failure	2905
UNIDENTIFIED	Ether rx excess flow ctrl	2906
UNIDENTIFIED	Ether rx over subscribed	2907
UNIDENTIFIED	Ether tx underrun	2908
UNIDENTIFIED	SNTP Host Failure	2909
UNIDENTIFIED	DS3 Frame Format Mismatch	2910
UNIDENTIFIED	Alarms/Events Suppressed For This Object	2911
BER_SD	BER Threshold Exceeded For Signal Degrade - High Order	2912
BER_SF	BER Threshold Exceeded For Signal Failure - High Order	2913
BER_SD	BER Threshold Exceeded For Signal Degrade - Low Order	2914
BER_SF	BER Threshold Exceeded For Signal Failure - Low Order	2915
UNIDENTIFIED	Failure To Switch To Protection - High Order Path	2916
UNIDENTIFIED	Failure To Switch To Protection - Low Order Path	2917
UNIDENTIFIED	Card is in Wait To Restore state	2918
ENV	Extreme High Volt - Battery A.	2919
ENV	Extreme Low Volt - Battery A.	2920
ENV	Extreme High Volt - Battery B.	2921
ENV	Extreme Low Volt - Battery B.	2922
UNIDENTIFIED	Switching Matrix Module Failure	2923
UNIDENTIFIED	Signaling Unable to setup circuit	2924
UNIDENTIFIED	RSVP Hello FSM to Neighbor down	2925
UNIDENTIFIED	LMP Hello FSM to Control Channel down	2926
UNIDENTIFIED	LMP neighbor discovery has failed	2927
UNIDENTIFIED	Unauthorized incoming signaling request	2928
UNIDENTIFIED	Signaled circuit going down	2929
UNIDENTIFIED	Autonomous PM Report Message Inhibited	2930
EQPT	I/O Slot To XCON Communication Failure	2931
UNIDENTIFIED	Forced Switch To Primary Reference	2932
UNIDENTIFIED	Forced Switch To Second Reference	2933
UNIDENTIFIED	Forced Switch to Third Reference	2934
UNIDENTIFIED	Forced Switch To Internal Clock	2935

A.4.7  CTM GateWay/CORBA Mapping— ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R4.1 and R4.6

Table A-22 lists the CTM GateWay/CORBA mapping for the ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R4.1 and R4.6.

Table A-22 CTM GateWay/CORBA Mapping for the ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R4.1 and R4.6 

TMF Mapping	NE Native probable cause	CTM Internal Index (Not reported in the notification)
UNIDENTIFIED	Normal Condition	25000
ENV	Failure detected External to the NE	25001
ENV	External Error	25002
UNIDENTIFIED	Excessive Switching	25003
UNIDENTIFIED	Incoming Failure Condition	25004
AIS	Alarm Indication Signal	25005
AIS	Alarm Indication Signal - Line	25006
AIS	Alarm Indication Signal - Path	25007
FOP_APS	APS Channel Failure	25008
FOP_APS	Byte Failure	25009
FOP_APS	Protection Switching Channel Match failure	25010
FOP_APS	Automatic Protection Switch Mode Mismatch	25011
FOP_APS	Far End Protection Line Failure	25012
UNIDENTIFIED	Bipolar Violation	25013
UNIDENTIFIED	Carrier Loss on the LAN	25014
UNIDENTIFIED	STS Concatenation Error	25015
UNIDENTIFIED	Excess Collisions On the LAN	25016
UNIDENTIFIED	Facility failure	25017
UNIDENTIFIED	Far End Block Error	25018
LOF	Loss of Frame	25019
LOP	Loss of Pointer	25020
LOP	Loss of Pointer - Path	25021
LOS	Loss of Signal	25022
UNIDENTIFIED	Out of Frame	25023
UNIDENTIFIED	Path Selector failure	25024
RAI	Remote Alarm Indication	25025
RAI	Remote Failure Indication	25026
RAI	Remote Failure Indication - Line	25027
RAI	Remote Failure Indication - Path	25028
BER_SD	Signal Degrade	25029
UNIDENTIFIED	Severely Errored Frame	25030
UNIDENTIFIED	Invalid Alarm	25031
BER_SF	Signal Failure	25032
UNIDENTIFIED	Signal Label Mismatch Failures	25033
UNIDENTIFIED	Payload Defect Indication	25034
UNIDENTIFIED	Payload Defect Indication - Path	25035
PLM	Payload Label Mismatch - Path	25036
UNEQ	Unequipped - Path	25037
UNIDENTIFIED	Loss Of Synchronization	25038
UNIDENTIFIED	Out Of Synchronization	25039
UNIDENTIFIED	Primary Synchronization Reference Failure	25040
UNIDENTIFIED	Secondary Synchronization Reference Failure	25041
UNIDENTIFIED	Third Synchronization Reference Failure	25042
UNIDENTIFIED	Fourth Synchronization Reference Failure	25043
UNIDENTIFIED	Fifth Synchronization Reference Failure	25044
UNIDENTIFIED	Sixth Synchronization Reference Failure	25045
UNIDENTIFIED	Outgoing Failure Condition	25046
RAI	Remote Defect Indication - Line	25047
RAI	Remote Defect Indication - Path	25048
UNIDENTIFIED	Free Running Synchronization Mode	25049
UNIDENTIFIED	Holdover Synchronization mode	25050
EQPT	Internal Fault	25051
UNIDENTIFIED	Internal Error	25052
UNIDENTIFIED	Internal Message Error	25053
UNIDENTIFIED	Mismatch Of Equipment And Attributes	25054
UNIDENTIFIED	Watchdog Timer Timeout	25055
ENV	Software Fault or Failure	25056
ENV	Software Fault - Data Integrity Fault	25057
UNIDENTIFIED	Program Failure	25058
EQPT	Control Equipment Failure	25059
EQPT	Control Processor Failure	25060
EQPT	Working Memory Failure	25061
EQPT	Interconnection Equipment Failure	25062
EQPT	Time Slot Interchange Equipment Failure	25063
EQPT	Equipment Failure	25064
EQPT	High Temperature	25065
EQPT	Facility Termination Equipment Failure	25066
EQPT	Automatic Laser Shutdown	25067
UNIDENTIFIED	Failure To Release From Protection	25068
EQPT	Receiver Failure	25069
EQPT	Transmit Failure	25070
UNIDENTIFIED	Failure To Switch To Protection	25071
UNIDENTIFIED	Equipment Unit Plug-In	25072
UNIDENTIFIED	Internal Power Failure	25073
UNIDENTIFIED	Fuse Alarm	25074
UNIDENTIFIED	Synchronization Unit Failure	25075
UNIDENTIFIED	Synchronization Switching Equipment Failure	25076
EQPT	Equipment Unit Un-plugged	25077
EQPT	Manually Caused Abnormal Condition	25078
UNIDENTIFIED	Manual Alarm Cutoff	25079
UNIDENTIFIED	Procedural Error	25080
EQPT	Improper Removal	25081
UNIDENTIFIED	Protection unit Not Available	25082
UNIDENTIFIED	Protection Switch	25083
UNIDENTIFIED	Recovery Or Service Protection Action Has Been Initiated	25084
UNIDENTIFIED	Automatic system Reset	25085
UNIDENTIFIED	Cold Restart	25086
UNIDENTIFIED	Forced Switch Back To Working	25087
UNIDENTIFIED	Forced Switch to Protection	25088
UNIDENTIFIED	Initialization Initiated	25089
UNIDENTIFIED	Lockout of Protection	25090
UNIDENTIFIED	Lockout of Working	25091
UNIDENTIFIED	Manual System Reset	25092
UNIDENTIFIED	Manual Switch To Internal Clock	25093
UNIDENTIFIED	Manual Switch To Primary Reference	25094
UNIDENTIFIED	Manual Switch To Second Reference	25095
UNIDENTIFIED	Manual Switch To Third Reference	25096
UNIDENTIFIED	Manual Switch To Fourth Reference	25097
UNIDENTIFIED	Manual Switch To Fifth Reference	25098
UNIDENTIFIED	Manual Switch To Sixth Reference	25099
UNIDENTIFIED	Manual Switch Back To Working	25100
UNIDENTIFIED	Manual Switch to Protection	25101
UNIDENTIFIED	Powerfail Restart	25102
UNIDENTIFIED	Software Download In Progress	25103
UNIDENTIFIED	Switch To Internal Clock	25104
UNIDENTIFIED	Switch To Primary Reference	25105
UNIDENTIFIED	Switch To Second Reference	25106
UNIDENTIFIED	Switch To Third Reference	25107
UNIDENTIFIED	Switch To Fourth Reference	25108
UNIDENTIFIED	Switch To Fifth Reference	25109
UNIDENTIFIED	Switch To Sixth Reference	25110
UNIDENTIFIED	Switched Back to Working	25111
UNIDENTIFIED	Switched To Protection	25112
UNIDENTIFIED	Warm Restart	25113
UNIDENTIFIED	Ring is in Wait To Restore state	25114
EQPT	Primary Nonvolatile Backup Memory Failure	25115
EQPT	Secondary Nonvolatile Backup Memory Failure	25116
EQPT	Control Bus Failure	25117
EQPT	Control Communications Equipment Failure	25118
UNIDENTIFIED	Loopback	25119
UNIDENTIFIED	Loopback, Network	25120
UNIDENTIFIED	Loopback, Terminal	25121
EQPT	Fan Failure	25122
DCC_FAILURE	SDCC Termination Failure	25123
UNIDENTIFIED	Loopback Facility	25124
EQPT	Payload Bus Failure To I/O Slot 1(XCON Slot 8)	25125
EQPT	Payload Bus Failure To I/O Slot 2(XCON Slot 8)	25126
EQPT	Payload Bus Failure To I/O Slot 3(XCON Slot 8)	25127
EQPT	Payload Bus Failure To I/O Slot 4(XCON Slot 8)	25128
EQPT	Payload Bus Failure To I/O Slot 5(XCON Slot 8)	25129
EQPT	Payload Bus Failure To I/O Slot 6(XCON Slot 8)	25130
EQPT	Payload Bus Failure To I/O Slot 12(XCON Slot 8)	25131
EQPT	Payload Bus Failure To I/O Slot 13(XCON Slot 8)	25132
EQPT	Payload Bus Failure To I/O Slot 14(XCON Slot 8)	25133
EQPT	Payload Bus Failure To I/O Slot 15(XCON Slot 8)	25134
EQPT	Payload Bus Failure To I/O Slot 16(XCON Slot 8)	25135
EQPT	Payload Bus Failure To I/O Slot 17(XCON Slot 8)	25136
EQPT	Payload Bus Failure To I/O Slot 1(XCON Slot 10)	25137
EQPT	Payload Bus Failure To I/O Slot 2(XCON Slot 10)	25138
EQPT	Payload Bus Failure To I/O Slot 3(XCON Slot 10)	25139
EQPT	Payload Bus Failure To I/O Slot 4(XCON Slot 10)	25140
EQPT	Payload Bus Failure To I/O Slot 5(XCON Slot 10)	25141
EQPT	Payload Bus Failure To I/O Slot 6(XCON Slot 10)	25142
EQPT	Payload Bus Failure To I/O Slot 12(XCON Slot 10)	25143
EQPT	Payload Bus Failure To I/O Slot 13(XCON Slot 10)	25144
EQPT	Payload Bus Failure To I/O Slot14(XCON Slot 10)	25145
EQPT	Payload Bus Failure To I/O Slot15(XCON Slot 10)	25146
EQPT	Payload Bus Failure To I/O Slot16(XCON Slot 10)	25147
EQPT	Payload Bus Failure To I/O Slot17(XCON Slot 10)	25148
EQPT	Control Bus 1 Failure	25149
EQPT	Control Bus 2 Failure	25150
EQPT	Invalid MAC Address	25151
EQPT	Board Failure	25152
EQPT	Diagnostics Failure	25153
EQPT	Medium Access Control Failure	25154
UNIDENTIFIED	Duplicate Node ID	25155
UNIDENTIFIED	Failure To Switch To Protection - Ring	25156
UNIDENTIFIED	Failure To Switch To Protection - Span	25157
UNIDENTIFIED	Manual Switch Back To Working - Ring	25158
UNIDENTIFIED	Manual Switch Back To Working - Span	25159
UNIDENTIFIED	Manual Switch To Protection - Ring	25160
UNIDENTIFIED	Manual Switch To Protection - Span	25161
UNIDENTIFIED	Forced Switch Back To Working - Ring	25162
UNIDENTIFIED	Forced Switch Back To Working - Span	25163
UNIDENTIFIED	Forced Switch To Protection - Ring	25164
UNIDENTIFIED	Forced Switch To Protection - Span	25165
UNIDENTIFIED	Lockout Of Protection - Ring	25166
UNIDENTIFIED	Lockout Of Protection - Span	25167
UNIDENTIFIED	Lockout Of working - Ring	25168
UNIDENTIFIED	Lockout Of working - Span	25169
UNIDENTIFIED	Ring Is Squelching Traffic	25170
FOP_APS	Inconsistent APS Code	25171
FOP_APS	Node ID Mismatch	25172
FOP_APS	Default K Byte	25173
FOP_APS	Connection Loss	25174
EQPT	TCC A To Shelf Slot 1 (DROP 1) Communication Failure	25175
EQPT	TCC A To Shelf Slot 2 (DROP 2) Communication Failure	25176
EQPT	TCC A To Shelf Slot 3 (DROP 3) Communication Failure	25177
EQPT	TCC A to Shelf Slot 4 (DROP 4) Communication Failure	25178
EQPT	TCC A To Shelf Slot 5 (TRUNK 1) Communication Failure	25179
EQPT	TCC A To Shelf Slot 6 (TRUNK 2) Communication Failure	25180
EQPT	TCC A To Shelf Slot 7 (TCC A) Communication Failure	25181
EQPT	TCC A To Shelf Slot 8 (XCON A) Communication Failure	25182
EQPT	TCC A To Shelf Slot 9 (AIC) Communication Failure	25183
EQPT	TCC A To Shelf Slot 10 (XCON B) Communication Failure	25184
EQPT	TCC A To Shelf Slot 11 (TCC B) Communication Failure	25185
EQPT	TCC A To Shelf Slot 12 (TRUNK 3) Communication Failure	25186
EQPT	TCC A To Shelf Slot 13 (TRUNK 4) Communication Failure	25187
EQPT	TCC A To Shelf Slot 14 (DROP 5) Communication Failure	25188
EQPT	TCC A To Shelf Slot 15 (DROP 6) Communication Failure	25189
EQPT	TCC A To Shelf Slot 16 (DROP 7) Communication Failure	25190
EQPT	TCC A To Shelf Slot 17 (DROP 8) Communication Failure	25191
EQPT	TCC A To DCC A Processor Communication Failure	25192
EQPT	TCC B To Shelf Slot 1 (DROP 1) Communication Failure	25193
EQPT	TCC B To Shelf Slot 2 (DROP 2) Communication Failure	25194
EQPT	TCC B To Shelf Slot 3 (DROP 3) Communication Failure	25195
EQPT	TCC B To Shelf Slot 4 (DROP 4) Communication Failure	25196
EQPT	TCC B To Shelf Slot 5 (TRUNK 1) Communication Failure	25197
EQPT	TCC B To Shelf Slot 6 (TRUNK 2) Communication Failure	25198
EQPT	TCC B To Shelf Slot 7 (TCC A) Communication Failure	25199
EQPT	TCC B To Shelf Slot 8 (XCON A) Communication Failure	25200
EQPT	TCC B To Shelf Slot 9 (AIC) Communication Failure	25201
EQPT	TCC B To Shelf Slot 10 (XCON B) Communication Failure	25202
EQPT	TCC B To Shelf Slot 11 (TCC B) Communication Failure	25203
EQPT	TCC B To Shelf Slot 12 (TRUNK 3) Communication Failure	25204
EQPT	TCC B To Shelf Slot 13 (TRUNK 4) Communication Failure	25205
EQPT	TCC B To Shelf Slot 14 (DROP 5) Communication Failure	25206
EQPT	TCC B To Shelf Slot 15 (DROP 6) Communication Failure	25207
EQPT	TCC B To Shelf Slot 16 (DROP 7) Communication Failure	25208
EQPT	TCC B To Shelf Slot 17 (DROP 8) Communication Failure	25209
EQPT	TCC B To DCC B Processor Communication Failure	25210
UNIDENTIFIED	Fast Start Synchronization Mode	25211
FOP_APS	Improper APS Code	25212
UNIDENTIFIED	BLSR Out Of Sync	25213
AIS	Alarm Indication Signal - VT	25214
RAI	Remote Failure Indication - VT	25215
PLM	Signal Label Mismatch Failure - Payload Label Mismatch - VT	25216
UNEQ	Signal Label Mismatch Failure - Unequipped - VT	25217
UNIDENTIFIED	Peer State Mismatch	25218
EQPT	Facility Termination Equipment - Receiver Missing	25219
EQPT	Facility Termination Equipment - Transmitter Missing	25220
LOP	Loss Of Pointer - VT	25221
UNIDENTIFIED	Embedded Operations Channel Failure - Link Down	25222
UNIDENTIFIED	Failed to Receive Synchronization Status Message	25223
UNIDENTIFIED	Synchronization Status Messages Are Disabled On This Interface	25224
UNIDENTIFIED	Primary Reference Source - Stratum 1 Traceable	25225
UNIDENTIFIED	Synchronized - Traceability Unknown	25226
UNIDENTIFIED	Stratum 2 Traceable	25227
UNIDENTIFIED	Transit Node Clock Traceable	25228
UNIDENTIFIED	Stratum 3E Traceable	25229
UNIDENTIFIED	Stratum 3 Traceable	25230
UNIDENTIFIED	SONET Minimum Clock Traceable	25231
UNIDENTIFIED	Stratum 4 Traceable	25232
UNIDENTIFIED	Do Not Use For Synchronization	25233
UNIDENTIFIED	Reserved For Network Synchronization Use	25234
UNIDENTIFIED	Failure To Switch To protection - Path	25235
UNIDENTIFIED	Manual Switch Of Working Facility - Equipment To Protection - Path	25236
UNIDENTIFIED	Working Facility - Equipment Forced To Switch To Protection - Path	25237
UNIDENTIFIED	Lockout Of Protection - Path	25238
UNIDENTIFIED	Automatic UPSR Switch Caused By AIS	25239
UNIDENTIFIED	Automatic UPSR Switch Caused By LOP	25240
UNIDENTIFIED	Automatic UPSR Switch Caused By UNEQ	25241
UNIDENTIFIED	Automatic UPSR Switch Caused By PDI	25242
UNIDENTIFIED	Automatic UPSR Switch Caused By SFBER	25243
UNIDENTIFIED	Automatic UPSR Switch Caused By SDBER	25244
UNIDENTIFIED	DS3 Idle Condition	25245
UNIDENTIFIED	DS1 Loopback Due To FEAC Command	25246
UNIDENTIFIED	DS1 Loopback Command Sent To Far End	25247
UNIDENTIFIED	DS3 Loopback Due to FEAC command	25248
UNIDENTIFIED	DS3 Loopback Command Sent To Far End	25249
UNIDENTIFIED	DS2 Loopback Due To Far End Command	25250
UNIDENTIFIED	DS2 Loopback Command Sent To Far End	25251
ENV	Far End AIS	25252
UNIDENTIFIED	Far End Multiple DS1 LOS Detected On DS3	25253
ENV	Far End DS1 Equipment Failure - Non Service Affecting	25254
ENV	Far End DS1 Equipment Failure - Service Affecting	25255
ENV	Far End Single DS1 LOS	25256
ENV	Far End DS3 Equipment Failure - Non Service Affecting	25257
ENV	Far End DS3 Equipment Failure - Service Affecting	25258
ENV	Far End Common Equipment Failure - Non Service Affecting	25259
UNIDENTIFIED	Far End IDLE	25260
ENV	Far End LOS	25261
ENV	Far End LOF	25262
UNIDENTIFIED	Performance Monitor Threshold Crossing Alert	25263
UNIDENTIFIED	Ethernet Bridge Is New Root Of Spanning Tree	25264
UNIDENTIFIED	Ethernet Bridge Topology Change	25265
UNIDENTIFIED	BLSR Tables Resynchronized	25266
ENV	System Reboot	25267
UNIDENTIFIED	Manual Switch Request on Facility - Equipment	25268
UNIDENTIFIED	Forced Switch Request on Facility Or Equipment	25269
UNIDENTIFIED	Lockout Switch Request on Facility - Equipment	25270
UNIDENTIFIED	RMON Histories And Alarms Reset Reboot	25271
UNIDENTIFIED	RMON Alarm	25272
LOS	Video Interface Card Loss Of Video IF Signal	25273
LOS	VIC Loss Of Video Base Band Signal	25274
LOS	VIC Loss Of Audio FM Signal	25275
LOS	VIC Loss Of Audio Base Band Channel 1 Signal	25276
LOS	VIC Loss Of Audio Base Band Channel 2 Signal	25277
LOS	VIC Loss Of Audio Base Band Channel 3 Signal	25278
LOS	VIC Loss Of Audio Base Band Channel 4 Signal	25279
TIM	STS Path Trace Identifier Mismatch	25280
ENV	NE Power Failure At Connector A	25281
ENV	NE Power Failure At Connector B	25282
UNIDENTIFIED	Free Memory On Card Very Low	25283
UNIDENTIFIED	Free Memory On Card Near Zero	25284
UNIDENTIFIED	Exercise Request on Ring	25285
UNIDENTIFIED	Exercise Request on Span	25286
UNIDENTIFIED	Squelching Path	25287
UNIDENTIFIED	Extra Traffic Preempted	25288
UNIDENTIFIED	Far End Lockout Of Working - Ring	25289
UNIDENTIFIED	Far End Lockout Of Working - Span	25290
UNIDENTIFIED	Far End Lockout Of Protection - Ring	25291
UNIDENTIFIED	Far End Lockout Of Protection - All Spans	25292
UNIDENTIFIED	Far End Working Facility Forced To Switch To Protection - Ring	25293
UNIDENTIFIED	Far End Working facility Forced To Switch To Protection - Span	25294
UNIDENTIFIED	Far End Manual Switch Of Working Facility To Protection- Ring	25295
UNIDENTIFIED	Far End Manual Switch Of Working Facility To Protection- Span	25296
UNIDENTIFIED	Far End Exercising Ring	25297
UNIDENTIFIED	Far End Exercising Span	25298
ENV	Far End BER Threshold Passed For Signal Failure - Ring	25299
ENV	Far End BER Threshold Passed For Signal Failure - Span	25300
ENV	Far End BER Threshold Passed For Signal Degrade - Ring	25301
ENV	Far End BER Threshold Passed For Signal Degrade - Span	25302
ENV	APS Channel - Far End Protection Line Signal Degrade	25303
UNIDENTIFIED	Ring Switch Is Active On The East Side	25304
UNIDENTIFIED	Ring Switch Is Active On The West Side	25305
UNIDENTIFIED	Span Switch Is Active On The East Side	25306
UNIDENTIFIED	Span Switch Is Active On The West Side	25307
UNIDENTIFIED	Unidirectional Full Pass Through Is Active	25308
UNIDENTIFIED	Bidirectional Full Pass Through Is Active	25309
UNIDENTIFIED	K Bytes Pass Through Is Active	25310
UNIDENTIFIED	Ring Is Segmented	25311
UNIDENTIFIED	Ring Topology Is Under Construction	25312
UNIDENTIFIED	Lockout Of Protection - All Spans	25313
UNIDENTIFIED	Far End Of Fiber Is Provisioned With Different Ring ID	25314
UNIDENTIFIED	Both Ends Of Fiber Provisioned As East Or Both as West	25315
SECURITY_VIOLATION	Security- Invalid login - See Audit Trail	25316
UNIDENTIFIED	Autonomous Messages Inhibited	25317
UNIDENTIFIED	Traffic Storm On LAN. LAN Temporarily Disabled	25318
UNIDENTIFIED	REPT^DBCHG Messages Inhibited	25319
SECURITY_VIOLATION	Security- User ID Has Expired	25320
EQPT	Partial Fan Failure	25321
UNIDENTIFIED	Force Switch Request On Ring	25322
UNIDENTIFIED	Force Switch Request On Span	25323
UNIDENTIFIED	Lockout Switch Request On Ring	25324
UNIDENTIFIED	Lockout Switch Request On Span	25325
UNIDENTIFIED	Manual Switch Request On Ring	25326
UNIDENTIFIED	Manual Switch Request On Span	25327
EQPT	Peer To Peer Slot Communication Failure	25328
EQPT	Peer To Peer Slot Communication Failure	25329
EQPT	TCC A To Shelf Slot Communication Failure	25330
EQPT	TCC B To Shelf Slot Communication Failure	25331
EQPT	Interconnection Equipment Failure - Working XC Payload Bus	25332
EQPT	Interconnection Equipment Failure - Protect XC Payload Bus	25333
EQPT	Inhibit Switch To Protect Request On Equipment	25334
EQPT	Inhibit Switch To Working Request On Equipment	25335
BER_SD	BER Threshold Exceeded For Signal Degrade - Line	25336
BER_SD	BER Threshold Exceeded For Signal Degrade - Path	25337
BER_SF	BER Threshold Exceeded For Signal Failure - Line	25338
BER_SF	BER Threshold Exceeded For Signal Failure - Path	25339
UNIDENTIFIED	Exercising Ring Successfully	25340
UNIDENTIFIED	Exercising Span Successfully	25341
UNIDENTIFIED	Span is in Wait To Restore state	25342
EQPT	Peer Card Not Responding	25343
UNIDENTIFIED	Exercise Request on Ring Failed	25344
UNIDENTIFIED	Exercise Request on Span Failed	25345
UNIDENTIFIED	Far End Lockout Of Protection - Span	25346
EQPT	Manufacturing Data Memory (EEPROM) Failure	25347
EQPT	Replaceable Equipment/Unit is Missing	25348
ENV	Software Download Failure	25349
TIM	TIM Section - Trace Identifier Mismatch Failure	25350
AIS	AIS - Multiplex Section - Alarm Indication Signal	25351
RAI	RFI - Multiplex Section - Remote Failure/Alarm Indication	25352
TIM	TIM High Order- Trace Identifier Mismatch Failure	25353
AU_AIS	AIS - Administration Unit - Alarm Indication Signal	25354
LOP	LOP - Administration Unit - Loss of Pointer	25355
UNEQ	SLMF - Unequipped High Order - Path Unequipped	25356
PLM	SLMF - PLM High Order - Path Label Mismatch	25357
RAI	RFI - High Order - Remote Failure/Alarm Indication	25358
LOP	LOP - Tributary Unit - Loss of Pointer	25359
TU-AIS	AIS - Tributary Unit - Alarm Indication Signal	25360
UNEQ	SLMF - Unequipped Low Order - Path Unequipped	25361
PLM	SLMF - PLM Low Order - Path Label Mismatch	25362
TIM	TIM Low Order - Trace Identifier Mismatch Failure	25363
RAI	RFI - Low Order - Remote Failure/Alarm Indication	25364
UNIDENTIFIED	G811 - Primary Reference Clock traceable	25365
UNIDENTIFIED	G812 - Transit Node Clock traceable	25366
UNIDENTIFIED	G812 - Local Node Clock traceable	25367
UNIDENTIFIED	G813 - Synchronous Equipment Timing Source traceable	25368
UNIDENTIFIED	E1 loopback due to FEAC command	25369
UNIDENTIFIED	E1 loopback command sent to Far End	25370
UNIDENTIFIED	E3 loopback due to FEAC command	25371
ENV	Far end multiple E1 LOS detected on E3	25372
ENV	Far end E1 eqpt fail non service affecting	25373
ENV	Far end E1 eqpt fail service affecting	25374
ENV	Far end Single E1 LOS	25375
ENV	Far end E3 eqpt fail service affecting	25376
UNIDENTIFIED	E3 loopback command sent to far end	25377
ENV	Far end E3 eqpt fail non service affecting	25378
ENV	Low Volt - Battery A	25379
ENV	High Volt - Battery A	25380
ENV	Low Volt - Battery B	25381
ENV	High Volt - Battery B	25382
UNIDENTIFIED	Procedural Error - MS-SP Ring out of sync	25383
UNIDENTIFIED	MS-SP Ring tables resynchronized	25384
UNIDENTIFIED	Automatic SNCP Switch caused by AIS	25385
UNIDENTIFIED	Automatic SNCP Switch caused by LOP	25386
UNIDENTIFIED	Automatic SNCP Switch caused by UNEQ	25387
UNIDENTIFIED	Automatic SNCP Switch caused by PDI	25388
UNIDENTIFIED	Automatic SNCP Switch caused by SFBER	25389
UNIDENTIFIED	Automatic SNCP Switch caused by SDBER	25390
UNIDENTIFIED	STM Concatenation error	25391
UNIDENTIFIED	E3 Idle Condition	25392
UNIDENTIFIED	Ios Config Copy Failed	25393
UNIDENTIFIED	Ios Config Copy In Progress	25394
UNIDENTIFIED	Alarms Suppressed By User Command	25399
UNIDENTIFIED	Alarms Suppressed for Maintenance	25400
UNIDENTIFIED	NA	25401
UNIDENTIFIED	Synchronization Reference Frequency Out Of Bounds	25402
UNIDENTIFIED	Ether tx excess flow ctrl	25403
UNIDENTIFIED	Ether tx oversubscribed	25404
UNIDENTIFIED	Transport layer failure	25405
UNIDENTIFIED	Ether rx excess flow ctrl	25406
UNIDENTIFIED	Ether rx over subscribed	25407
UNIDENTIFIED	Ether tx underrun	25408
UNIDENTIFIED	SNTP Host Failure	25409
UNIDENTIFIED	DS3 Frame Format Mismatch	25410
UNIDENTIFIED	Alarms/Events Suppressed For This Object	25411
BER_SD	BER Threshold Exceeded For Signal Degrade - High Order	25412
BER_SF	BER Threshold Exceeded For Signal Failure - High Order	25413
BER_SD	BER Threshold Exceeded For Signal Degrade - Low Order	25414
BER_SF	BER Threshold Exceeded For Signal Failure - Low Order	25415
UNIDENTIFIED	Failure To Switch To Protection - High Order Path	25416
UNIDENTIFIED	Failure To Switch To Protection - Low Order Path	25417
UNIDENTIFIED	Wait To Restore	25418
ENV	Extreme High Volt - Battery A.	25419
ENV	Extreme Low Volt - Battery A.	25420
ENV	Extreme High Volt - Battery B.	25421
ENV	Extreme Low Volt - Battery B.	25422
UNIDENTIFIED	Switching Matrix Module Failure	25423
UNIDENTIFIED	Signaling Unable to setup circuit	25424
UNIDENTIFIED	RSVP Hello FSM to Neighbor down	25425
UNIDENTIFIED	LMP Hello FSM to Control Channel down	25426
UNIDENTIFIED	LMP Neighbor Discovery has failed	25427
UNIDENTIFIED	Unauthorized incoming signaling request	25428
UNIDENTIFIED	Signaled circuit going down	25429
UNIDENTIFIED	Autonomous PM Report Message Inhibited	25430
EQPT	I/O Slot To XCON Communication Failure	25431
UNIDENTIFIED	Forced Switch To Primary Reference	25432
UNIDENTIFIED	Forced Switch To Second Reference	25433
UNIDENTIFIED	Forced Switch To Third Reference	25434
UNIDENTIFIED	Forced Switch To Internal Clock	25435
LOM	LOF - Administration Unit - Loss of Multi Frame	25436
UNIDENTIFIED	Admin Logout of User	25438
UNIDENTIFIED	User Locked Out	25439
UNIDENTIFIED	Admin Lockout of User	25440
UNIDENTIFIED	Admin Lockout Clear	25441
SECURITY_VIOLATION	Security- Invalid Login - Username - See Audit Log	25442
SECURITY_VIOLATION	Security- Invalid Login - Password - See Audit Log	25443
SECURITY_VIOLATION	Security- Invalid Login - Locked Out - See Audit Log	25444
SECURITY_VIOLATION	Security- Invalid Login - Already Logged On - See Audit Log	25445
UNIDENTIFIED	Login of User	25446
UNIDENTIFIED	Automatic Logout of IdleUser	25447
UNIDENTIFIED	Logout of User	25448
UNIDENTIFIED	Cross-connect Loopback	25451
UNIDENTIFIED	Error in Startup Config	25454
UNIDENTIFIED	No Startup Config	25455
EQPT	Laser Approaching End of Life	25456
UNIDENTIFIED	Database Backup Failed	25457
UNIDENTIFIED	Database Restore Failed	25458
UNIDENTIFIED	8B10B Out of Sync	25459
AIS	ODUk- Alarm Indication Signal	25460
AIS	OTUk- Alarm Indication Signal	25461
UNIDENTIFIED	OTUk- Backward Defect Indicator	25462
UNIDENTIFIED	ODUk- Backward Defect Indicator	25463
UNIDENTIFIED	FEC Uncorrected Word	25464
UNIDENTIFIED	GCC Embedded Operation Channel Failure	25465
UNIDENTIFIED	OTUk- Incoming Alignment Error	25466
UNIDENTIFIED	ODUk- Locked Defect - PM	25467
LOM	Loss of Multiframe	25468
UNIDENTIFIED	ODUk- Open Connection Indication	25469
PLM	Payload Type Identifier Mismatch	25470
TIM	ODUk- Trail Trace Identifier Mismatch	25471
TIM	OTUk- Trail Trace Identifier Mismatch	25472
EQPT	Equipment High Laser Bias	25473
EQPT	Equipment High Laser Temp	25474
EQPT	Equipment High Laser Peltier	25475
EQPT	Equipment High Rx power	25476
EQPT	Equipment High Tx power	25477
EQPT	Equipment High Rx temperature	25478
EQPT	Equipment Low Rx temperature	25479
EQPT	Equipment High Transceiver voltage	25480
EQPT	Equipment Low Laser Bias	25481
EQPT	Equipment Low Laser Temp	25482
EQPT	Equipment Low Laser Peltier	25483
EQPT	Equipment Low Rx power	25484
EQPT	Equipment Low Tx power	25485
EQPT	Equipment Low Transceiver voltage	25486
EQPT	Equipment Rx Locked	25487
EQPT	Equipment Squelched	25488
EQPT	Equipment Tx Locked	25489
BER_SF	OTU Signal Failure	25490
BER_SF	ODUk- Signal Failure	25491
BER_SD	OTUk Signal Degrade	25492
BER_SD	ODUk- Signal Degrade	25493
UNIDENTIFIED	Pluggable Port missing	25494
UNIDENTIFIED	Pluggable Port rate mismatch	25495
SECURITY_VIOLATION	Pluggable Port security code mismatch	25496
UNIDENTIFIED	Tci not selected	25497
UNIDENTIFIED	Tci 1 Clock Failure	25498
UNIDENTIFIED	ODUk- Backward Defect Indicator	25499
UNIDENTIFIED	ODUk- Backward Defect Indicator	25500
UNIDENTIFIED	ODUk- Backward Defect Indicator	25501
UNIDENTIFIED	ODUk- Open Connection Indication	25504
UNIDENTIFIED	ODUk- Locked Defect - TCM2	25505
AIS	ODUk- Alarm Indication Signal	25506
TIM	ODUk- Trail Trace Identifier Mismatch	25507
BER_SD	ODUk- Signal Degrade - TCM2	25508
BER_SF	ODUk- Signal Failure - TCM2	25509
UNIDENTIFIED	ODUk- Open Connection Indication	25510
UNIDENTIFIED	ODUk- Locked Defect - TCM1	25511
AIS	ODUk- Alarm Indication Signal	25512
TIM	ODUk- Trail Trace Identifier Mismatch	25513
BER_SD	ODUk- Signal Degrade - TCM1	25514
BER_SF	ODUk- Signal Failure - TCM1	25515
LOF	OTUk- Loss Of Frame	25516
UNIDENTIFIED	Tci 2 Clock Failure	25517
UNIDENTIFIED	Audit Log 80 Percent Full	25518
UNIDENTIFIED	Module Communication Failure	25519
UNIDENTIFIED	Need to Save Running Config	25520
UNIDENTIFIED	Audit Log 100 Percent Full - Oldest records will be lost	25521
UNIDENTIFIED	Standby Database Out of Sync	25522
EQPT	Redundant Power Capability Lost	25523
EQPT	Equipment Wavelength Mismatch	25524
UNIDENTIFIED	DSP Communication Failure	25525
UNIDENTIFIED	DSP Failure	25526
UNIDENTIFIED	Loss of Channel	25527
UNIDENTIFIED	FEC Mismatch	25528
UNIDENTIFIED	LAN Connection Polarity Reversed	25529
UNIDENTIFIED	Enhanced Remote Failure Indication - Path - Server	25530
UNIDENTIFIED	Enhanced Remote Failure Indication - Path - Connectivity	25531
UNIDENTIFIED	Enhanced Remote Failure Indication - Path - Payload	25532
SECURITY_VIOLATION	Security Violation Detected	25533
SECURITY_VIOLATION	Security Intrusion Attempt Detected - See Audit Log	25534
EQPT	Variable Optical Attenuator Degrade Low	25536
EQPT	Variable Optical Attenuator Degrade High	25537
EQPT	Variable Optical Attenuator Failure Low	25538
EQPT	Variable Optical Attenuator Failure High	25539
EQPT	Laser Bias Degrade	25540
EQPT	Laser Bias Failure	25541
EQPT	Laser Temperature Degrade	25542
EQPT	Optical Amplifier Gain Degrade Low	25543
EQPT	Optical Amplifier Gain Degrade High	25544
EQPT	Optical Amplifier Gain Failure Low	25545
EQPT	Optical Amplifier Gain Failure High	25546
EQPT	Laser Auto Power Reduction	25547
EQPT	Case Temperature Degrade	25548
EQPT	Fiber Temperature Degrade	25549
EQPT	Shutter Open	25550
EQPT	AWG Temperature Degrade	25551
EQPT	AWG Temperature Failure	25552
EQPT	AWG Over-Temperature	25553
EQPT	Shutter Insertion Loss Variation Degrade Low	25554
EQPT	Shutter Insertion Loss Variation Degrade High	25555
EQPT	AWG Warm Up	25556
EQPT	Plug-in Module Communication Failure	25557
EQPT	Optical Amplifier Initialization	25558
UNIDENTIFIED	Optical Channel connection failure	25559
UNIDENTIFIED	Optical Channel activation failure	25560
UNIDENTIFIED	Optical Channel deactivation failure	25561
UNIDENTIFIED	Network Topology Incomplete	25562
UNIDENTIFIED	Optical Network Type Mismatch	25563
EQPT	Automatic Power Control Failure	25564
EQPT	Automatic Power Control Disabled	25565
UNIDENTIFIED	Ring ID Mismatch	25566
TIM	TIM Section Monitor - Trace Identifier Mismatch Failure	25569
UNIDENTIFIED	Optical Channel Incomplete	25570
RAI	Enhanced Remote Failure Indication - Path - Server	25571
RAI	Enhanced Remote Failure Indication - Path - Connectivity	25572
RAI	Enhanced Remote Failure Indication Path - Payload	25573
EQPT	Automatic Laser Shutdown	25574
EQPT	Optical Power Failure High	25577
EQPT	Battery Failure	25578
EQPT	Extreme High Volt	25579
EQPT	Extreme Low Volt	25580
EQPT	High Volt	25581
EQPT	Low Volt	25582
EQPT	Connection Equipment Mismatch	25583
UNIDENTIFIED	Disable Inactive User	25584
UNIDENTIFIED	Disable Inactive Clear	25585
UNIDENTIFIED	Suspend User	25586
UNIDENTIFIED	Suspend User Clear	25587
DCC_FAILURE	Line DCC Termination Failure	25588
DCC_FAILURE	Multiplex Section DCC Termination Failure	25589
UNIDENTIFIED	GigaBit Ethernet Out of Sync	25590
AIS	Alarm Indication Signal in TX	25591
RAI	Remote Alarm Indication in TX	25592
UNIDENTIFIED	Incoming Signal Loss on Fibre Channel Interface	25594
UNIDENTIFIED	Incoming Synchronization Loss on Fibre Channel Interface	25595
UNIDENTIFIED	Out Of Frame Detected by GFP Receiver	25596
UNIDENTIFIED	Client Signal Loss Frames Detected by GFP Receiver	25597
UNIDENTIFIED	Client Synchronization Loss Frames Detected by GFP Receiver	25598
UNIDENTIFIED	Sequence Mismatch	25599
UNIDENTIFIED	Loss of Alignment	25600
UNIDENTIFIED	Out of Use - Administrative Command	25601
UNIDENTIFIED	Out of Use - Transport Failure	25602
UNIDENTIFIED	VCAT Group Down	25603
UNIDENTIFIED	VCAT Group Degraded	25604
UNIDENTIFIED	Firewall Has Been Disabled	25575
EQPT	Optical Power Failure Low	25576
UNIDENTIFIED	VCAT Group Incomplete	25605
UNIDENTIFIED	Kbyte Channel Failure	25606
EQPT	Industrial High Temperature	25607
FOP_APS	APS Invalid Mode	25608
UNIDENTIFIED	IP address already in use within the same DCC Area	25609
UNIDENTIFIED	Node name already in use within the same DCC Area	25610
UNIDENTIFIED	Rear Panel Ethernet Link Removed	25611
UNIDENTIFIED	Manual Switch To Protect Resulted in No Traffic Switch	25612
UNIDENTIFIED	Manual Switch Back To Working Resulted in No Traffic Switch	25613
UNIDENTIFIED	Forced Switch To Protection Resulted in No Traffic Switch	25614
UNIDENTIFIED	Forced Switch Back To Working Resulted in No Traffic Switch	25615
LOS	Loss of Signal For Optical Channel	25616
UNIDENTIFIED	Syslog Messages	28000
UNIDENTIFIED	Configuration Events	28001
UNIDENTIFIED	LinkUp/LinkDown Trap	28002
UNIDENTIFIED	Cold/Warn start Trap	28003
SECURITY_VIOLATION	Authentication Failure notification	28004

A.4.8  CTM GateWay/CORBA Mapping—ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R5.0

Table A-23 lists the CTM GateWay/CORBA mapping for the ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R5.0.

Table A-23 CTM GateWay/CORBA Mapping for the ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15454 SDH R5.0 

TMF Mapping	NE Native Probable Cause	CTM Internal Index (Not Reported by GateWay/CORBA)
UNIDENTIFIED	Normal Condition	25000
ENV	Failure detected External to the NE	25001
ENV	External Error	25002
UNIDENTIFIED	Excessive Switching	25003
UNIDENTIFIED	Incoming Failure Condition	25004
AIS	Alarm Indication Signal	25005
AIS	Alarm Indication Signal - Line	25006
AIS	Alarm Indication Signal - Path	25007
FOP_APS	APS Channel Failure	25008
FOP_APS	Byte Failure	25009
FOP_APS	Protection Switching Channel Match failure	25010
FOP_APS	Automatic Protection Switch Mode Mismatch	25011
FOP_APS	Far End Protection Line Failure	25012
UNIDENTIFIED	Bipolar Violation	25013
UNIDENTIFIED	Carrier Loss on the LAN	25014
UNIDENTIFIED	STS Concatenation Error	25015
UNIDENTIFIED	Excess Collisions On the LAN	25016
UNIDENTIFIED	Facility failure	25017
UNIDENTIFIED	Far End Block Error	25018
LOF	Loss of Frame	25019
LOP	Loss of Pointer	25020
LOP	Loss of Pointer - Path	25021
LOS	Loss of Signal	25022
UNIDENTIFIED	Out of Frame	25023
UNIDENTIFIED	Path Selector failure	25024
RAI	Remote Alarm Indication	25025
RAI	Remote Failure Indication	25026
RAI	Remote Failure Indication - Line	25027
RAI	Remote Failure Indication - Path	25028
BER_SD	Signal Degrade	25029
UNIDENTIFIED	Severely Errored Frame	25030
UNIDENTIFIED	Invalid Alarm	25031
BER_SF	Signal Failure	25032
UNIDENTIFIED	Signal Label Mismatch Failures	25033
UNIDENTIFIED	Payload Defect Indication	25034
UNIDENTIFIED	Payload Defect Indication - Path	25035
PLM	Payload Label Mismatch - Path	25036
UNEQ	Unequipped - Path	25037
UNIDENTIFIED	Loss Of Synchronization	25038
UNIDENTIFIED	Out Of Synchronization	25039
UNIDENTIFIED	Primary Synchronization Reference Failure	25040
UNIDENTIFIED	Secondary Synchronization Reference Failure	25041
UNIDENTIFIED	Third Synchronization Reference Failure	25042
UNIDENTIFIED	Fourth Synchronization Reference Failure	25043
UNIDENTIFIED	Fifth Synchronization Reference Failure	25044
UNIDENTIFIED	Sixth Synchronization Reference Failure	25045
UNIDENTIFIED	Outgoing Failure Condition	25046
RAI	Remote Defect Indication - Line	25047
RAI	Remote Defect Indication - Path	25048
UNIDENTIFIED	Free Running Synchronization Mode	25049
UNIDENTIFIED	Holdover Synchronization mode	25050
EQPT	Internal Fault	25051
UNIDENTIFIED	Internal Error	25052
UNIDENTIFIED	Internal Message Error	25053
UNIDENTIFIED	Mismatch Of Equipment And Attributes	25054
UNIDENTIFIED	Watchdog Timer Timeout	25055
ENV	Software Fault or Failure	25056
ENV	Software Fault - Data Integrity Fault	25057
UNIDENTIFIED	Program Failure	25058
EQPT	Control Equipment Failure	25059
EQPT	Control Processor Failure	25060
EQPT	Working Memory Failure	25061
EQPT	Interconnection Equipment Failure	25062
EQPT	Time Slot Interchange Equipment Failure	25063
EQPT	Equipment Failure	25064
EQPT	High Temperature	25065
EQPT	Facility Termination Equipment Failure	25066
EQPT	Automatic Laser Shutdown	25067
UNIDENTIFIED	Failure To Release From Protection	25068
EQPT	Receiver Failure	25069
EQPT	Transmit Failure	25070
UNIDENTIFIED	Failure To Switch To Protection	25071
UNIDENTIFIED	Equipment Unit Plug-In	25072
UNIDENTIFIED	Internal Power Failure	25073
UNIDENTIFIED	Fuse Alarm	25074
UNIDENTIFIED	Synchronization Unit Failure	25075
UNIDENTIFIED	Synchronization Switching Equipment Failure	25076
EQPT	Equipment Unit Un-plugged	25077
EQPT	Manually Caused Abnormal Condition	25078
UNIDENTIFIED	Manual Alarm Cutoff	25079
UNIDENTIFIED	Procedural Error	25080
EQPT	Improper Removal	25081
UNIDENTIFIED	Protection unit Not Available	25082
UNIDENTIFIED	Protection Switch	25083
UNIDENTIFIED	Recovery Or Service Protection Action Has Been Initiated	25084
UNIDENTIFIED	Automatic system Reset	25085
UNIDENTIFIED	Cold Restart	25086
UNIDENTIFIED	Forced Switch Back To Working	25087
UNIDENTIFIED	Forced Switch to Protection	25088
UNIDENTIFIED	Initialization Initiated	25089
UNIDENTIFIED	Lockout of Protection	25090
UNIDENTIFIED	Lockout of Working	25091
UNIDENTIFIED	Manual System Reset	25092
UNIDENTIFIED	Manual Switch To Internal Clock	25093
UNIDENTIFIED	Manual Switch To Primary Reference	25094
UNIDENTIFIED	Manual Switch To Second Reference	25095
UNIDENTIFIED	Manual Switch To Third Reference	25096
UNIDENTIFIED	Manual Switch To Fourth Reference	25097
UNIDENTIFIED	Manual Switch To Fifth Reference	25098
UNIDENTIFIED	Manual Switch To Sixth Reference	25099
UNIDENTIFIED	Manual Switch Back To Working	25100
UNIDENTIFIED	Manual Switch to Protection	25101
UNIDENTIFIED	Powerfail Restart	25102
UNIDENTIFIED	Software Download In Progress	25103
UNIDENTIFIED	Switch To Internal Clock	25104
UNIDENTIFIED	Switch To Primary Reference	25105
UNIDENTIFIED	Switch To Second Reference	25106
UNIDENTIFIED	Switch To Third Reference	25107
UNIDENTIFIED	Switch To Fourth Reference	25108
UNIDENTIFIED	Switch To Fifth Reference	25109
UNIDENTIFIED	Switch To Sixth Reference	25110
UNIDENTIFIED	Switched Back to Working	25111
UNIDENTIFIED	Switched To Protection	25112
UNIDENTIFIED	Warm Restart	25113
UNIDENTIFIED	Ring is in Wait To Restore state	25114
EQPT	Primary Nonvolatile Backup Memory Failure	25115
EQPT	Secondary Nonvolatile Backup Memory Failure	25116
EQPT	Control Bus Failure	25117
EQPT	Control Communications Equipment Failure	25118
UNIDENTIFIED	Loopback	25119
UNIDENTIFIED	Loopback, Network	25120
UNIDENTIFIED	Loopback, Terminal	25121
EQPT	Fan Failure	25122
DCC_FAILURE	SDCC Termination Failure	25123
UNIDENTIFIED	Loopback Facility	25124
EQPT	Payload Bus Failure To I/O Slot 1(XCON Slot 8)	25125
EQPT	Payload Bus Failure To I/O Slot 2(XCON Slot 8)	25126
EQPT	Payload Bus Failure To I/O Slot 3(XCON Slot 8)	25127
EQPT	Payload Bus Failure To I/O Slot 4(XCON Slot 8)	25128
EQPT	Payload Bus Failure To I/O Slot 5(XCON Slot 8)	25129
EQPT	Payload Bus Failure To I/O Slot 6(XCON Slot 8)	25130
EQPT	Payload Bus Failure To I/O Slot 12(XCON Slot 8)	25131
EQPT	Payload Bus Failure To I/O Slot 13(XCON Slot 8)	25132
EQPT	Payload Bus Failure To I/O Slot 14(XCON Slot 8)	25133
EQPT	Payload Bus Failure To I/O Slot 15(XCON Slot 8)	25134
EQPT	Payload Bus Failure To I/O Slot 16(XCON Slot 8)	25135
EQPT	Payload Bus Failure To I/O Slot 17(XCON Slot 8)	25136
EQPT	Payload Bus Failure To I/O Slot 1(XCON Slot 10)	25137
EQPT	Payload Bus Failure To I/O Slot 2(XCON Slot 10)	25138
EQPT	Payload Bus Failure To I/O Slot 3(XCON Slot 10)	25139
EQPT	Payload Bus Failure To I/O Slot 4(XCON Slot 10)	25140
EQPT	Payload Bus Failure To I/O Slot 5(XCON Slot 10)	25141
EQPT	Payload Bus Failure To I/O Slot 6(XCON Slot 10)	25142
EQPT	Payload Bus Failure To I/O Slot 12(XCON Slot 10)	25143
EQPT	Payload Bus Failure To I/O Slot 13(XCON Slot 10)	25144
EQPT	Payload Bus Failure To I/O Slot14(XCON Slot 10)	25145
EQPT	Payload Bus Failure To I/O Slot15(XCON Slot 10)	25146
EQPT	Payload Bus Failure To I/O Slot16(XCON Slot 10)	25147
EQPT	Payload Bus Failure To I/O Slot17(XCON Slot 10)	25148
EQPT	Control Bus 1 Failure	25149
EQPT	Control Bus 2 Failure	25150
EQPT	Invalid MAC Address	25151
EQPT	Board Failure	25152
EQPT	Diagnostics Failure	25153
EQPT	Medium Access Control Failure	25154
UNIDENTIFIED	Duplicate Node ID	25155
UNIDENTIFIED	Failure To Switch To Protection - Ring	25156
UNIDENTIFIED	Failure To Switch To Protection - Span	25157
UNIDENTIFIED	Manual Switch Back To Working - Ring	25158
UNIDENTIFIED	Manual Switch Back To Working - Span	25159
UNIDENTIFIED	Manual Switch To Protection - Ring	25160
UNIDENTIFIED	Manual Switch To Protection - Span	25161
UNIDENTIFIED	Forced Switch Back To Working - Ring	25162
UNIDENTIFIED	Forced Switch Back To Working - Span	25163
UNIDENTIFIED	Forced Switch To Protection - Ring	25164
UNIDENTIFIED	Forced Switch To Protection - Span	25165
UNIDENTIFIED	Lockout Of Protection - Ring	25166
UNIDENTIFIED	Lockout Of Protection - Span	25167
UNIDENTIFIED	Lockout Of working - Ring	25168
UNIDENTIFIED	Lockout Of working - Span	25169
UNIDENTIFIED	Ring Is Squelching Traffic	25170
FOP_APS	Inconsistent APS Code	25171
FOP_APS	Node ID Mismatch	25172
FOP_APS	Default K Byte	25173
FOP_APS	Connection Loss	25174
EQPT	TCC A To Shelf Slot 1 (DROP 1) Communication Failure	25175
EQPT	TCC A To Shelf Slot 2 (DROP 2) Communication Failure	25176
EQPT	TCC A To Shelf Slot 3 (DROP 3) Communication Failure	25177
EQPT	TCC A to Shelf Slot 4 (DROP 4) Communication Failure	25178
EQPT	TCC A To Shelf Slot 5 (TRUNK 1) Communication Failure	25179
EQPT	TCC A To Shelf Slot 6 (TRUNK 2) Communication Failure	25180
EQPT	TCC A To Shelf Slot 7 (TCC A) Communication Failure	25181
EQPT	TCC A To Shelf Slot 8 (XCON A) Communication Failure	25182
EQPT	TCC A To Shelf Slot 9 (AIC) Communication Failure	25183
EQPT	TCC A To Shelf Slot 10 (XCON B) Communication Failure	25184
EQPT	TCC A To Shelf Slot 11 (TCC B) Communication Failure	25185
EQPT	TCC A To Shelf Slot 12 (TRUNK 3) Communication Failure	25186
EQPT	TCC A To Shelf Slot 13 (TRUNK 4) Communication Failure	25187
EQPT	TCC A To Shelf Slot 14 (DROP 5) Communication Failure	25188
EQPT	TCC A To Shelf Slot 15 (DROP 6) Communication Failure	25189
EQPT	TCC A To Shelf Slot 16 (DROP 7) Communication Failure	25190
EQPT	TCC A To Shelf Slot 17 (DROP 8) Communication Failure	25191
EQPT	TCC A To DCC A Processor Communication Failure	25192
EQPT	TCC B To Shelf Slot 1 (DROP 1) Communication Failure	25193
EQPT	TCC B To Shelf Slot 2 (DROP 2) Communication Failure	25194
EQPT	TCC B To Shelf Slot 3 (DROP 3) Communication Failure	25195
EQPT	TCC B To Shelf Slot 4 (DROP 4) Communication Failure	25196
EQPT	TCC B To Shelf Slot 5 (TRUNK 1) Communication Failure	25197
EQPT	TCC B To Shelf Slot 6 (TRUNK 2) Communication Failure	25198
EQPT	TCC B To Shelf Slot 7 (TCC A) Communication Failure	25199
EQPT	TCC B To Shelf Slot 8 (XCON A) Communication Failure	25200
EQPT	TCC B To Shelf Slot 9 (AIC) Communication Failure	25201
EQPT	TCC B To Shelf Slot 10 (XCON B) Communication Failure	25202
EQPT	TCC B To Shelf Slot 11 (TCC B) Communication Failure	25203
EQPT	TCC B To Shelf Slot 12 (TRUNK 3) Communication Failure	25204
EQPT	TCC B To Shelf Slot 13 (TRUNK 4) Communication Failure	25205
EQPT	TCC B To Shelf Slot 14 (DROP 5) Communication Failure	25206
EQPT	TCC B To Shelf Slot 15 (DROP 6) Communication Failure	25207
EQPT	TCC B To Shelf Slot 16 (DROP 7) Communication Failure	25208
EQPT	TCC B To Shelf Slot 17 (DROP 8) Communication Failure	25209
EQPT	TCC B To DCC B Processor Communication Failure	25210
UNIDENTIFIED	Fast Start Synchronization Mode	25211
FOP_APS	Improper APS Code	25212
UNIDENTIFIED	BLSR Out Of Sync	25213
AIS	Alarm Indication Signal - VT	25214
RAI	Remote Failure Indication - VT	25215
PLM	Signal Label Mismatch Failure - Payload Label Mismatch - VT	25216
UNEQ	Signal Label Mismatch Failure - Unequipped - VT	25217
UNIDENTIFIED	Peer State Mismatch	25218
EQPT	Facility Termination Equipment - Receiver Missing	25219
EQPT	Facility Termination Equipment - Transmitter Missing	25220
LOP	Loss Of Pointer - VT	25221
UNIDENTIFIED	Embedded Operations Channel Failure - Link Down	25222
UNIDENTIFIED	Failed to Receive Synchronization Status Message	25223
UNIDENTIFIED	Synchronization Status Messages Are Disabled On This Interface	25224
UNIDENTIFIED	Primary Reference Source - Stratum 1 Traceable	25225
UNIDENTIFIED	Synchronized - Traceability Unknown	25226
UNIDENTIFIED	Stratum 2 Traceable	25227
UNIDENTIFIED	Transit Node Clock Traceable	25228
UNIDENTIFIED	Stratum 3E Traceable	25229
UNIDENTIFIED	Stratum 3 Traceable	25230
UNIDENTIFIED	SONET Minimum Clock Traceable	25231
UNIDENTIFIED	Stratum 4 Traceable	25232
UNIDENTIFIED	Do Not Use For Synchronization	25233
UNIDENTIFIED	Reserved For Network Synchronization Use	25234
UNIDENTIFIED	Failure To Switch To protection - Path	25235
UNIDENTIFIED	Manual Switch Of Working Facility - Equipment To Protection - Path	25236
UNIDENTIFIED	Working Facility - Equipment Forced To Switch To Protection - Path	25237
UNIDENTIFIED	Lockout Of Protection - Path	25238
UNIDENTIFIED	Automatic UPSR Switch Caused By AIS	25239
UNIDENTIFIED	Automatic UPSR Switch Caused By LOP	25240
UNIDENTIFIED	Automatic UPSR Switch Caused By UNEQ	25241
UNIDENTIFIED	Automatic UPSR Switch Caused By PDI	25242
UNIDENTIFIED	Automatic UPSR Switch Caused By SFBER	25243
UNIDENTIFIED	Automatic UPSR Switch Caused By SDBER	25244
UNIDENTIFIED	DS3 Idle Condition	25245
UNIDENTIFIED	DS1 Loopback Due To FEAC Command	25246
UNIDENTIFIED	DS1 Loopback Command Sent To Far End	25247
UNIDENTIFIED	DS3 Loopback Due to FEAC command	25248
UNIDENTIFIED	DS3 Loopback Command Sent To Far End	25249
UNIDENTIFIED	DS2 Loopback Due To Far End Command	25250
UNIDENTIFIED	DS2 Loopback Command Sent To Far End	25251
ENV	Far End AIS	25252
UNIDENTIFIED	Far End Multiple DS1 LOS Detected On DS3	25253
ENV	Far End DS1 Equipment Failure - Non Service Affecting	25254
ENV	Far End DS1 Equipment Failure - Service Affecting	25255
ENV	Far End Single DS1 LOS	25256
ENV	Far End DS3 Equipment Failure - Non Service Affecting	25257
ENV	Far End DS3 Equipment Failure - Service Affecting	25258
ENV	Far End Common Equipment Failure - Non Service Affecting	25259
UNIDENTIFIED	Far End IDLE	25260
ENV	Far End LOS	25261
ENV	Far End