Table Of Contents
Route Manager
Managing Reports
Route Table Reports
Specific Route Monitor Reports
Unicast
Multicast
Compare Baselines
View Baselines
Managing Diagnostics
Create Baseline
Check Routing Table
Route Manager
This section contains information concerning the underlying operation of CMM and will be of most interest to the System Administrator that supports the application.
This chapter covers:
•
Managing Reports
•Managing Diagnostics
Managing Reports
Route Table Reports
To create route table reports:
Step 1 Select the Route Manager tool.
Step 2 Click Reporting.
The Reporting page appears
Step 3 Click Reporting Table Reports.
Specific Route Monitor Reports
Unicast
To create specific monitor reports for unicast:
Step 1 Select the Route Manager tool.
Step 2 Click Reporting.
The Reporting page appears
Step 3 Click Specific Route Monitor Reports.
Step 4 Click Unicast.
Multicast
To create route table reports:
Step 1 Select the Route Manager tool.
Step 2 Click Reporting.
The Reporting page appears
Step 3 Click Specific Route Monitor Reports.
Step 4 Click Multicast.
Compare Baselines
To compare baselines:
Step 1 Select the Route Manager tool.
Step 2 Click Reporting.
The Reporting page appears
Step 3 Click Compare Baselines.
Step 4 Select Router.
Field or Button
|
Description
|
Router
|
The Router field will reflect the chosen router.
|
Unicast Baseline 1
|
Select the first unicast baseline value.
|
Unicast Baseline 2
|
Select the second unicast baseline value.
|
Compare
|
Compares the value of Unicast Baseline1 and Unicast Baseline 2. Each time that you change a baseline value, click Compare.
|
Multicast Baseline 1
|
Select the first multicast baseline value.
|
Multicast Baseline 2
|
Select the second multicast baseline value.
|
Compare
|
Compares the value of Multicast Baseline1 and Multicast Baseline 2. Each time that you change a baseline value, click Compare.
|
View Baselines
To view routing table baselines:
Step 1 Select the Route Manager tool.
Step 2 Click Reporting.
The Reporting page appears
Step 3 Click View Baselines.
Step 4 Select Router.
Field or Button
|
Description
|
Router
|
Select a router.
|
Unicast Baseline
|
Select the unicast baseline value.
|
View
|
View the value of the Unicast Baseline. Each time that you change a baseline value, click View.
|
Multicast Baseline
|
Select the multicast baseline value.
|
View
|
View the value of the Multicast Baseline. Each time that you change a baseline value, click View.
|
Managing Diagnostics
Create Baseline
To create routing table baselines:
Step 1 Select the Route Manager tool.
Step 2 Click Diagnostics.
The Diagnostics page appears
Step 3 Click Create Baselines.
Note The CPU utilization of the router will be checked first to determine if a query of the routing table is acceptable based upon the configured CPU threshold. A value of -1, indicates that the routing table should be queried without checking CPU utilization.
Field or Button
|
Description
|
Routing Table Type
|
Select either Unicast or Multicast.
|
Select Router
|
Select a router.
|
Baseline
|
Enter the baseline value.
|
Replace Baseline
|
Check this box to replace an existing baseline value.
|
CPU Threshold
|
Enter the value of the CPU threshold.
|
Run
|
Click to run the process.
|
Check Routing Table
To check the routing table:
Step 1 Select the Route Manager tool.
Step 2 Click Diagnostics.
The Diagnostics page appears
Step 3 Click Check Routing Table.
Note The CPU utilization of the router will be checked first to determine if a query of the routing table is acceptable based upon the configured CPU threshold. A value of -1, indicates that the routing table should be queried without checking CPU utilization.
Field or Button
|
Description
|
Routing Table Type
|
Select either Unicast or Multicast.
|
Select Router
|
Select a router.
|
Baseline
|
Enter the baseline value.
|
Replace Baseline
|
Check this box to replace an existing baseline value.
|
CPU Threshold
|
Enter the value of the CPU threshold.
|
Run
|
Click to run the process.
|
