This appendix contains reference information for the Cisco Info Center Desktop.
Event List Command Line Options
You can use the options described in Table C-1 when starting the Event List (nco_event) from the command line.
Table C-1 nco_event Command Line Options
Command Line Option
Description
-config<string>
Initial configuration file to use. For information about Event List configurations, see the Cisco Info Center User Guide, 3.6.
-diagnostic
Displays extended diagnostic messages.
This option is only useful for detecting problems with the Event List. Do not use this command line option unless you are advised by Cisco Systems Technical Support.
-dualwrite<integer>
In a Desktop Cisco Info Server architecture, indicates whether to enable or disable dual-write mode. Valid options are:
0 = disable dual-write mode
1 = enable dual-write mode.
The -dualwrite command line option overrides the DualWrite field entry in the Desktop Cisco Info Server master.national table.
For information about Desktop Cisco Info Server architectures, see the Cisco Info Center Installation and Configuration Guide, 3.6.
-help
Displays help for this command and then exits.
-masterserver<string>
In a Desktop Cisco Info Server architecture, indicates the master Cisco Info Server to use.
The -masterserver command line option overrides the MasterServer field entry in the Desktop Cisco Info Server master.national table.
For information about Desktop Cisco Info Server architectures, see the Cisco Info Center Installation and Configuration Guide, 3.6.
-password<string>
Password to log in to the Event List.
-server<string>
Name of the Cisco Info Server to which you are connecting.
