Table Of Contents
Supported Devices Table for the Cisco Application Networking Manager 1.1
Supported Cisco Application Control Engine (ACE) Modules
Supported Devices Table for the Cisco Application Networking Manager 1.1
Revised: 11/26/07
The following sections show the Cisco devices supported for the Cisco Application Networking Manager (ANM) 1.1.
•
Supported Cisco Application Control Engine (ACE) Modules
You can find information about new device support at Cisco.com, http://www.cisco.com.
Supported Cisco Application Control Engine (ACE) Modules
ANM 1.1 supports Cisco ACE modules ACE10-6500-K9 and ACE20-MOD-K9 running software versions:
•
3.0(0)A1(6.2a)
•
3.0(0)A1(6.2)
•
3.0(0)A1(6.1)
•
3.0(0)A1(5a)
•
3.0(0)A1(4a)
•
3.0(0)A1(4)
•
3.0(0)A1(3b)
For more information about ACE modules and available software versions, see ACE module product literature at http://www.cisco.com/en/US/products/ps6906/index.html.
Note
SNMPv2c must be configured on the ANM and the ACE module for queries and sending traps.
Supported Switches
ANM 1.1 supports the following Cisco Catalyst 6500 series switches with Cisco Supervisor 720 modules:
•
6503
•
6504
•
6506
•
6509
•
6513
Table 1 lists the devices and the sysObjectIDs that the ANM server supports.
Note
The chassis must have a K9 (Triple Data Encryption Standard [3DES]) software image in order to enable the SSH server. The ANM requires SSH2 to be enabled on the chassis. For more information, see the Installation Guide for the Cisco Application Networking Manager 1.1.
For more information about ACE modules and supported devices, see ACE module product literature at http://www.cisco.com/en/US/products/ps6906/index.html.
Supported Supervisor Engines
Table 2 identifies the Cisco Supervisor Engines and their software versions that ANM 1.1 supports.
For more information about ACE modules and supported supervisor engines, see ACE module product literature at http://www.cisco.com/en/US/products/ps6906/index.html.
Supported Browsers
All browsers must have cookies and DHTML enabled. In addition, to utilize the VLAN Connectivity feature under Config > Tools, the client browser must have the ability to run Java applets. The version of Java machine to be installed in the client is not specific; any version can be utilized.

