-
Cisco Active Network Abstraction Technology Support and Information Model Reference Manual, 3.6.2
-
Preface
-
Introduction
-
Internet Protocol “IP”
-
Routing Protocols “BGP/OSPF”
-
Ethernet (IEEE 802.3)
-
Token Ring “TR” (IEEE 802.5)
-
Asynchronous Transfer Mode “ATM”
-
Frame Relay “FR”
-
Point-to-Point Protocol “PPP” and High Level Data
-
Layer 2 Tunnel Protocol “L2TP”
-
Digital Subscriber Line “DSL” and Integrated
-
Physical Technologies
-
Multiprotocol Label Switching “MPLS”
-
Multi Protocol Label Switching Traffic Engineering
-
Virtual Private Networks “VPNs”
-
Pseudo Wire Emulation Edge to Edge (PWE3)
-
Access Control Lists “ACLs”
-
Physical Equipment
-
Base Logical Components
-
Common (Shared by Several)
-
Cisco ANA VNE Topology
-
Table Of Contents
Inventory and Information Model Objects (IMOs)
Frame Relay Virtual Connection
Frame Relay Traffic Descriptor
Frame Relay Trunk Virtual Connection
Frame Relay "FR"
This chapter describes the level of support that Cisco ANA provides for FR, as follows:
•
Inventory and Information Model Objects (IMOs)
Technology Description
Frame Relay
Frame Relay (FR) is a high performance variable length packets switching with statistical multiplexing Data Link (Layer 2) WAN protocol, which Although originally designed for use across Integrated Services Digital Network (ISDN) interface, today it is used over a variety of other network interfaces as well.
FR networks consist of FR switches interconnected by point-to-point FR links or Interfaces and are fundamentally connection-oriented, which means that a virtual channel (VC) must be set up across the FR network prior to any data transfer.
Inventory and Information Model Objects (IMOs)
This section includes the following tables:
•
•
•
•
•
Frame Relay Interface
The following Data Link layer Frame Relay Interface object aggregates multiple Frame Relay Virtual Connections, which it is bound to by its VC Table attributes. It is bound by its Containing Termination Points attribute to a Physical Layer Interface, and is primarily being accessed by Data Link layer VC Multiplexer, bound by its Contained Connection Termination Points attribute. It is also being accessed by Virtual Connection Switching Entity.
Table 7-1 Frame Relay Interface (IFrameRelay/IFrTrunk)
Address Format
Frame relay address format (Unknown, q921, q922March90, q922November90, q922)
Any
Configuration
Maximum Supported VCs
Maximum supported virtual connections
Any
Configuration
Protocol Type
Frame relay protocol type (Unknown, Frame Relay, FR FUNI, Frame Forward)
Any
Configuration
VC Table
Array of Frame Relay Virtual Connections
Any
Configuration
Cross Connect Table
Array of Virtual Cross Connections
Any
Configuration
IANA Type
IANA type of the sub/layer
N/A
N/A
Containing Termination Points
Underlying termination points (connection or physical)
Any
N/A
Contained Connection Termination Points
Bound Connection Termination Points
Any
N/A
Frame Relay Virtual Connection
The following Data Link layer Frame Relay Virtual Connection object, is bound by its Containing Termination Points attribute to a Data Link layer Frame Relay Interface object, and is primarily accessed by the Virtual Cross Connection and Data Link layer VC Encapsulation, however it is not bound to any of them by any of its attributes.
Table 7-2 Frame Relay Virtual Connection (IFrVc)
Data Link Connection Identifier
Data Link Connection Identifier (DLCI)
Any
Configuration
Traffic Descriptor
Traffic descriptor (Frame Relay Traffic Descriptor)
Any
Configuration
Ingress Traffic Descriptor
Ingress traffic descriptor (Frame Relay Traffic Descriptor)
Any
Configuration
Egress Traffic Descriptor
Egress traffic descriptor (Frame Relay Traffic Descriptor)
Any
Configuration
Administrative Status
Administrative status (Unknown, Up, Down)
Any
Status
Operational Status
Operational status (Unknown, Up, Down)
Any
Status
IANA Type
IANA type of the sub/layer
N/A
N/A
Containing Termination Points
Underlying termination points (connection or physical)
Any
N/A
Contained Connection Termination Points
Bound Connection Termination Points
Any
N/A
Frame Relay Traffic Descriptor
The following Frame Relay Traffic Descriptor object describes the traffic of a single Frame Relay Virtual Connection is being aggregated by a Traffic Descriptor Container object (see Common (Shared by Several)).
Frame Relay Logical Interface
The following Data Link layer Frame Relay Logical Interface object aggregates multiple Frame Relay Virtual Connections, which it is bound to by its VC Table attributes. It is bound by its Containing Termination Points attribute to a Physical Layer Interface, and is primarily accessed by the Virtual Connection Switching Entity and Data Link layer VC Encapsulation bound by its Contained Connection Termination Points attribute.
Frame Relay Trunk Virtual Connection
The following Data Link layer Frame Relay Trunk Virtual Connection object, is bound by its Containing Termination Points attribute to a Frame Relay Interface object, and is primarily accessed by the Virtual Cross Connection and Data Link layer VC Encapsulation, however it is not bound to any of them by any of its attributes.
Network Topology
The discovery of Frame Relay (FR) Data Link layer topology is unsupported and is manually (statically) configured by the system administrator.
Service Alarms
The following alarms are supported for this technology:
•
•
•
•
•
•
•
Note
Note
