Table Of Contents
Support Information for Alcatel-Lucent Devices
Alcatel-Lucent 7302 Intelligent Services Access Manager (ISAM) DSLAMs
Alcatel-Lucent 7302 ISAM—Supported Software Versions
Alcatel-Lucent 7302 ISAM—Supported Topologies
Alcatel-Lucent 7302 ISAM—Supported Modules
Alcatel-Lucent 7302 ISAM—Supported Technologies
Alcatel-Lucent 7302 ISAM—Supported Events
Alcatel-Lucent 7450 Ethernet Service Switch
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Software Versions
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Topologies
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Modules
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Technologies
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Service Events
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Software Versions
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Topologies
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Modules
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Technologies
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Service Events
Supported Technologies on Alcatel-Lucent Devices
Base Logical Components
Layer 1
IP
Ethernet (Physical)
Physical Equipment
Ethernet (Logical)
ATM
Frame Relay
DSL
Support Information for Alcatel-Lucent Devices
This chapter contains the Virtual Network Element (VNE) device support information in Cisco ANA 3.6 SP1 for the following devices:
•
Alcatel-Lucent 7302 Intelligent Services Access Manager (ISAM) DSLAMs
•Alcatel-Lucent 7450 Ethernet Service Switch
•Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
For information about the technologies supported by each of these VNEs, see Supported Technologies on Alcatel-Lucent Devices.
Alcatel-Lucent 7302 Intelligent Services Access Manager (ISAM) DSLAMs
This section includes the following information about Alcatel-Lucent 7302 ISAM DSLAMs:
•Alcatel-Lucent 7302 ISAM—Supported Software Versions
•Alcatel-Lucent 7302 ISAM—Supported Topologies
•Alcatel-Lucent 7302 ISAM—Supported Modules
•Alcatel-Lucent 7302 ISAM—Supported Technologies
•Alcatel-Lucent 7302 ISAM—Supported Events
Note For information about which NE types are supported in Cisco ANA 3.6 SP1, see Supported Alcatel-Lucent Devices in Cisco ANA 3.6 SP1.
Alcatel-Lucent 7302 ISAM—Supported Software Versions
Table 8 lists the supported software versions for Alcatel-Lucent 7302 ISAM DSLAMs in Cisco ANA 3.6 SP1.
Table 8 Supported Software Versions for Alcatel-Lucent 7302 ISAM DSLAMs
Software Version
|
|
2.0.0.16
|
V
|
2.3.1.15
|
V
|
2.4.2.4
|
V
|
Alcatel-Lucent 7302 ISAM—Supported Topologies
The following topologies are supported for Alcatel-Lucent 7302 ISAM DSLAMs in Cisco ANA 3.6 SP1:
•ATM counters
Alcatel-Lucent 7302 ISAM—Supported Modules
Table 9 lists the supported modules for Alcatel-Lucent 7302 ISAM DSLAMs in Cisco ANA 3.6 SP1.
Table 9 Supported Modules for Alcatel-Lucent 7302 ISAM DSLAMs
Module Name
|
Module Description
|
|
AACU-A
|
ADSL Alarm Control Unit version A (R3 equipment)
|
V
|
AACU-C
|
ADSL Alarm Control Unit version C (R4 equipment)
|
V
|
ABLT-D
|
MultiDSL POTS UD BVB LT standard version D
|
V
|
ABLT-E
|
Multi-DSL POTS Line Termination version E
|
V
|
ADLT-C
|
ADSL Line termination version C (4 lines)
|
V
|
ADLT-E
|
ADSL Line termination version E (4 lines)
|
V
|
ADLT-F
|
ADSL (Euro) Line termination version F (ISDN support, 4 lines)
|
V
|
ADLT-J
|
ADSL Line termination version J (12 lines)
|
V
|
ADLT-K
|
ADSL Line termination version K (12 lines)
|
V
|
ADLT-L
|
ADSL Line termination version L (24 lines)
|
V
|
ADLT-M
|
ADSL Line termination version M (12 lines)
|
V
|
ADLT-S
|
ADSL Line Termination version S - BVB enabled
|
V
|
ADLT-W
|
ADSL Line Termination version W - POTS/BVB ready
|
V
|
ADSE-A
|
ADSL Serial Extender version A
|
V
|
ADSE-B
|
ADSL Serial Extender version B
|
V
|
ADSE-C
|
ADSL Serial Extender version C
|
V
|
AICC-A
|
IMA ATM E1-NT 2 Mits Controller Card
|
V
|
ANY_BOARD
|
ANY_BOARD
|
V
|
ASCC-P
|
ASCC-P
|
V
|
ASCC-PE
|
PDH E3 Interface Controller Card
|
V
|
ASCC-S1
|
STM-1 Interface Controller Card
|
V
|
BSEC-A
|
Broad Band Shelf Extender Card
|
V
|
D1LT-A
|
DS1 Line termination version A
|
V
|
D1LT-B
|
4 T1 ports Using IMA Group
|
V
|
D3LT-A
|
DS3 Line termination version A
|
V
|
D3NT-A
|
DS3 Network Termination version A
|
V
|
D3NT-C
|
DS3 Network Termination version C
|
V
|
E1LT-A
|
E1 (IMA) Line Termination version A (4 lines)
|
V
|
E1NT-A
|
(Quad) E1 (IMA) Network Termination version A
|
V
|
E1NT-C
|
GANT-B motherboard and E1PL-B daughterboard (PLIM)
|
V
|
EBLT-A
|
ADSL2+ POTS Line Termination version A
|
V
|
EBLT-C
|
ADSL2+ POTS Line Termination version C
|
V
|
ECNT-A
|
7302 ISAM Combined network termination version A
|
V
|
LTAC-C
|
Line Terminal ADSL Combiner Card
|
V
|
LTAC-D
|
Line Terminal ADSL Combiner Card
|
V
|
LTSC-A
|
Line Termination SHDSL Card
|
V
|
MACU-A
|
MiniRAM ACU version A
|
V
|
NBLC-A
|
Narrowband Line Card
|
V
|
SALT-A
|
1 Port OC3 Card
|
V
|
SALT-C
|
STM-1/OC3c (HCL based) Line Termination Unit version C
|
V
|
SANT-D
|
Synchronous (STM1) ATM Network Termination version D
|
V
|
SANT-E
|
GANT-A motherboard and SONI-A daughterboard (PLIM)
|
V
|
SANT-F
|
GANT-B motherboard and SONI-A daughterboard (PLIM)
|
V
|
SANT-G
|
Synchronous (STM1) ATM Network Termination version G
|
V
|
SHLT-B
|
SHDSL Line termination versoion B (12 lines)
|
V
|
SMLT-A
|
SHDSL Line termination version A (24 lines with IMA)
|
V
|
SMLT-B
|
SHDSL Line Termination Unit Version B(12 lines, with IMA)
|
V
|
Note For detailed information about the specific technologies and attributes supported by this NE, see Alcatel-Lucent 7302 ISAM—Supported Technologies.
Alcatel-Lucent 7302 ISAM—Supported Technologies
The following technologies are supported by the Alcatel-Lucent 7302 ISAM in Cisco ANA 3.6 SP1:
•Base Logical Components
•Layer 1
•IP
•Ethernet (Physical)
•Physical Equipment
•Ethernet (Logical)
•ATM
•DSL
Alcatel-Lucent 7302 ISAM—Supported Events
Table 10 lists the supported service events for Alcatel-Lucent 7302 ISAM DSLAMs in Cisco ANA 3.6 SP1.
Table 10 Service Events for Alcatel-Lucent 7302 ISAM DSLAMs
Event Name
|
|
card in/out
|
N
|
link down/up
|
N
|
Device Unreachable
|
N
|
CPU Over Utilized
|
N
|
Memory Over utilize
|
N
|
Device Unsupported
|
N
|
Module Unsupported
|
N
|
Port Flapping
|
N
|
Port Down
|
N
|
Card up/down
|
N
|
Alcatel-Lucent 7450 Ethernet Service Switch
This section includes the following information about Alcatel-Lucent 7450 Ethernet Service Switch devices:
•Alcatel-Lucent 7450 Ethernet Service Switch—Supported Software Versions
•Alcatel-Lucent 7450 Ethernet Service Switch—Supported Topologies
•Alcatel-Lucent 7450 Ethernet Service Switch—Supported Modules
•Alcatel-Lucent 7450 Ethernet Service Switch—Supported Technologies
•Alcatel-Lucent 7450 Ethernet Service Switch—Supported Service Events
Note For information about which NE types are supported in Cisco ANA 3.6 SP1, see Supported Alcatel-Lucent Devices in Cisco ANA 3.6 SP1.
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Software Versions
Table 11 lists the supported software versions for Alcatel-Lucent 7450 Ethernet Service Switch devices in Cisco ANA 3.6 SP1.
Table 11 Supported Software Versions for Alcatel-Lucent 7450 Ethernet Service Switch
Software Version
|
|
3.0.R1
|
V
|
3.0.R7
|
V
|
4.0.R5
|
V
|
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Topologies
The following topologies are supported for Alcatel-Lucent 7450 Ethernet Service Switch devices in Cisco ANA 3.6 SP1:
•MAC
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Modules
Table 12 lists the supported modules for Alcatel-Lucent 7450 Ethernet Service Switch devices in Cisco ANA 3.6 SP1.
Table 12 Supported Modules for Alcatel-Lucent 7450 Ethernet Service Switch
Module Name
|
Module Description
|
|
M10-1GB-SFP
|
MDA 10 Ports 1-Gigabit Ethernet SFP
|
V
|
M16-OC12/3-SFP
|
MDA 16 Ports OC12/OC3 SFP
|
V
|
M8-OC12/3-SFP
|
MDA 8 Ports OC12/OC3 SFP
|
V
|
M16-OC3-SFP
|
MDA 16 Ports OC3 SFP
|
V
|
M4-OC48-SFP
|
MDA 4 Ports OC48 SFP
|
V
|
M1-10GB
|
MDA 1 Port 10 GigabitP
|
V
|
M2-OC48-SFP
|
MDA 2 Ports OC48 SFP
|
V
|
20-100ETH-SFP
|
MDA 20 Port 100FX
|
V
|
M20-1GB-TX
|
MDA 20 Ports 10/100/1000 Ethernet TX
|
V
|
M2-10GB-XFP
|
MDA 2 Ports 10Gig Ethernet XFP
|
V
|
M20-1GB-SFP
|
MDA 20 Ports 10/100/1000 Ethernet SFP
|
V
|
VSM-CCA
|
VSM Cross Connect
|
V
|
M5-1GB-SFP-B
|
MDA 5 Ports 10/100/1000 Ethernet SFP
|
V
|
M10-1GB-SFP-B
|
MDA 10 Ports 10/100/1000 Ethernet SFP
|
V
|
SFM-200G
|
200g CPM/SF module
|
V
|
SFM-100G
|
100g CPM/SF module
|
V
|
SFM2-200G
|
200g CPM/SF module
|
V
|
IOM-20G
|
2 x 10-Gig MDA IOM Card
|
V
|
M60-10/100ETH-TX
|
MDA 60 Ports 10/100 Ethernet TX
|
V
|
M60-10/100ET-TX
|
MDA 60 Ports 10/100 Ethernet TX
|
V
|
IOM-20G-B
|
2 x 10-Gig MDA IOM Card, B
|
V
|
IOM-20G
|
2 x 10-Gig MDA IOM Card
|
V
|
Note For detailed information about the specific technologies and attributes supported by this NE, see Alcatel-Lucent 7450 Ethernet Service Switch—Supported Technologies.
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Technologies
The following technologies are supported by the Alcatel-Lucent 7450 Ethernet Service Switch in Cisco ANA 3.6 SP1:
•Base Logical Components
•Layer 1
•IP
•Ethernet (Physical)
•Physical Equipment
•Ethernet (Logical)
Alcatel-Lucent 7450 Ethernet Service Switch—Supported Service Events
Table 13 lists the supported service events for Alcatel-Lucent 7450 Ethernet Service Switch devices in Cisco ANA 3.6 SP1.
Table 13 Service Events for Alcatel-Lucent 7450 Ethernet Service Switch
Event Name
|
|
card in/out
|
Y
|
link down/up
|
Y
|
Device Unreachable
|
N
|
CPU Over Utilized
|
N
|
Device Unsupported
|
N
|
Module Unsupported
|
N
|
Port Flapping
|
N
|
Port Down
|
Y
|
Card up/down
|
Y
|
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
This section includes the following information about Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 switches:
•Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Software Versions
•Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Topologies
•Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Modules
•Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Technologies
•Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Service Events
Note For information about which NE types are supported in Cisco ANA 3.6 SP1, see Supported Alcatel-Lucent Devices in Cisco ANA 3.6 SP1.
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Software Versions
Table 14 lists the supported software versions for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 switches in Cisco ANA 3.6 SP1.
Table 14 Supported Software Versions for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
Software Version
|
|
07.02.02.08
|
S
|
07.02.04.19
|
S
|
07.03.01.14
|
S
|
08.00.03.11
|
S
|
08.00.03.11
|
S
|
08.00.03.07
|
S
|
08.00.03.11
|
S
|
08.00.03.22
|
S
|
09.01.01.04
|
S
|
09.01.01.13
|
S
|
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Topologies
The following topologies are supported for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 switches in Cisco ANA 3.6 SP1:
•ATM counters
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Modules
Table 15 lists the supported modules for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 switches in Cisco ANA 3.6 SP1.
Table 15 Supported Modules for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
Module Name
|
Module Description
|
|
V35-6
|
6-port V.35 i/o card
|
S
|
FE3-1
|
1-port Fractional E3 i/o card
|
S
|
PON-ETHER-2
|
PON R2.0 Ethernet UNI sub-card 2 port
|
S
|
BIO4-CH
|
Scorpion channelized BIO
|
S
|
BIO4-CH-OC12-1
|
Scorpion channelized OC12 PHY 1 port
|
S
|
BIO4-CH-STM1-2
|
Scorpion channelized stm-1 PHY 2 port
|
S
|
BIO4-CH-OC12-2
|
Scorpion channelized OC12 PHY 2 port
|
S
|
BIO4-CH-DS3-12
|
Scorpion channelized DS3 12 port
|
S
|
IOM6-CH-DS3-T3-6
|
Positron channelized DS3 6 port
|
S
|
IOM5-OC3-4
|
Positron OC3 ATM/POS card
|
S
|
IOM5-OC12-1
|
Positron OC12 ATM/POS card
|
S
|
IOM5-IP-SERVER
|
Positron IP Server card
|
S
|
HSSI-2
|
HSSI i/o card
|
S
|
NP-2
|
NP2
|
S
|
BIO4-CH-OC3-2
|
Scorpion channelized OC3 PHY 2 port
|
S
|
BIO4-CH-DS3-10
|
Scorpion channelized DS3 PHY 10 port
|
S
|
DSX1-10
|
10-port DSX-1 card
|
S
|
RS232-18
|
18-port X.21/V.24 I/O card, for STDX 3000/6000 only
|
S
|
RS232-8
|
8-port X.21/V.24 I/O card, for STDX 3000/6000 only
|
S
|
UT1-4-24
|
4-port 24-channel Un-Channelized T1
|
S
|
UE1-4-30
|
4-port 30-channel Un-Channelized E1
|
S
|
ATMDS3-1
|
1-port ATM DS3 UNI I/O card
|
S
|
ATME3-1
|
1-port ATM E3 UNI I/O card
|
S
|
PRI-4
|
4-port ISDN PRI I/O card
|
S
|
FT1-1-24
|
1-port 24-channel Fractional T1
|
S
|
E1-PRI-4
|
4-port E1 PRI I/O card
|
S
|
SFT1-4-24
|
4-port short haul 24-channel Fractional T1 card
|
S
|
SUT1-4-24
|
4-port short haul 24-channel Un-Channelized T1 card
|
S
|
ST1-PRI-4
|
4-port short haul PRI I/O card
|
S
|
T1-ATM
|
T1 ATM
|
S
|
E1-ATM
|
E1 ATM
|
S
|
ADS3-T3
|
ATM DS3 T3 (topaz)
|
S
|
ADS3-E3
|
ATM DS3 E3 (topaz)
|
S
|
CBR-DS1-S-4
|
4-port CBR T1 structured card
|
S
|
CBR-DS1-US-4
|
4-port CE T1 card
|
S
|
FE1-1-30
|
1-port 30-channel Fractional E1
|
S
|
CBR-E1-S-4
|
4-port CBR E1 structured card
|
S
|
CBR-E1-US-4
|
4-port CE E1 card
|
S
|
ATMIWU-1
|
1-port ATM-IWU STM-1/STS-3c card
|
S
|
TOC3-ATM-4
|
4-port Topaz OC3c/STM1 ATM card
|
S
|
TSTM1-ATM-4
|
4-port Topaz STM1 ATM card (OBSOLETE code)
|
S
|
SP-4
|
4x4 switching processor (new terminology is "sp-10")
|
S
|
SP-8
|
8x8 switching processor (new terminology is "sp-20")
|
S
|
ATMCS-1
|
1-port ATM-CS card (siemens)
|
S
|
TOC12-ATM-1
|
1-port Topaz OC12c/STM4 ATM card
|
S
|
TSTM4-ATM-1
|
1-port Topaz STM4 ATM card (OBSOLETE code)
|
S
|
UIO-6
|
6-port universal i/o card
|
S
|
ADS1-T1
|
Topaz 8 port T1 ATM
|
S
|
ADS1-E1
|
Topaz 8 port E1 ATM
|
S
|
ADS1-J2
|
Topaz 8 port J2 ATM
|
S
|
E1-12
|
12-port E1 i/o card
|
S
|
BIO1416
|
Garnet BIO1 4 PHY sub-cards 16 ports
|
S
|
BIO1OC34
|
Garnet BIO1 OC3 PHY sub-card 4 ports
|
S
|
BIO1OC121
|
Garnet BIO1 OC12 PHY sub-card 1 port
|
S
|
BIO1OC12X4
|
Garnet BIO1 OC12x4 PHY sub-card 1 port 4 channels
|
S
|
BIO1OC481
|
Garnet BIO1 OC48 PHY sub-card 1 port
|
S
|
NP1
|
Garnet Node Processor card
|
S
|
CP1
|
Control Processor
|
S
|
SF1
|
Garnet Switch Fabric card
|
S
|
TM1
|
Garnet Timing Module card
|
S
|
TFDS3-T3-6
|
6-port Topaz DS3 T3 Ultracore card
|
S
|
TFDS3-E3-6
|
6-port Topaz DS3 E3 Ultracore card
|
S
|
TFAST-ETHER-4
|
4-port Topaz Fast Ethernet Ultracore card
|
S
|
FAST-ETHER-2
|
2-port BSTDX Fast Ethernet Ultracore card
|
S
|
LS-OC3-1
|
1-port BSTDX OC3c/STM-1 Ultracore card
|
S
|
TCFDS3-T3-6
|
6-port Topaz Cell Frame Cell DS3 T3 Ultracore card
|
S
|
TCFDS3-E3-6
|
6-port Topaz Cell Frame Cell DS3 E3 Ultracore card
|
S
|
TOC3-CFC-2
|
2-port Topaz Cell Frame Cell OC3c/STM-1 Ultracore card
|
S
|
UIO-8
|
8-port V.35 i/o card
|
S
|
ATMCS-E3-1
|
1-port ATM-CS-E3 card (siemens)
|
S
|
BE1-ATM-12
|
12-port BSTDX E1 ATM card
|
S
|
BT1-ATM-12
|
12-port BSTDX T1 ATM card
|
S
|
BDS3-1-0
|
1 port BSTDX Channelized 3/1/0
|
S
|
GFETHER-4
|
Granite Topaz Fast Ethernet UC card
|
S
|
GFDS3-T3-6
|
Granite Topaz Frame DS3 UC card
|
S
|
GFDS3-E3-6
|
Granite Topaz Frame E3 UC card
|
S
|
GCHN-DS3-4
|
Granite Topaz Channalized DS3 card
|
S
|
G-SERVER
|
Granite Topaz Server card
|
S
|
FT1-4-24
|
4-port 24-channel Fractional T1
|
S
|
SP-30
|
8x8 sp with new PTS
|
S
|
SP-40
|
8x8 sp with new PTS and more memory
|
S
|
BIO3
|
Piranha GX550 Frame card
|
S
|
GENET-1
|
Piranha Gigabit Ethernet PHY
|
S
|
BIO1-DOWNLINK-1
|
GARNET DOWNLINK PHY card for shelf communications attachment
|
S
|
SHELF-UPLINK-1
|
1-port Shelf (fc) UPLINK card
|
S
|
SHELF-DS3-4
|
4-port Shelf DS3 transport card
|
S
|
SHELF-RED-DS3-4
|
4-port Shelf Redundant DS3 transport card
|
S
|
BRVX
|
BSTDX RVX Card
|
S
|
BCH-DS1-E1-12
|
12-port 9000 Channelixed T1/E1 Card
|
S
|
FE1-4-30
|
4-port 30-channel Fractional E1
|
S
|
CBX-SUB-DS3
|
CBX Subrate DS3 Card
|
S
|
BIO1-DS3-4
|
Garnet BIO1 DS3 PHY sub-card 4 Ports
|
S
|
BIO1-E3-4
|
Garnet BIO1 DS3 PHY sub-card 4 Ports
|
S
|
ADS3-IMA-T3-3-28
|
TOPAZ Tsunami 3Port T3 IMA
|
S
|
ADS3-IMA-E3-3-30
|
TOPAZ Tsunami 3Port E3 IMA
|
S
|
BIO2-4-16
|
Garnet BIO2 4 PHY sub-cards 16 ports
|
S
|
SHELF-DS3-1-0-2
|
2 port GX250 DS3-1-0 Transport Card
|
S
|
SHELF-OC12-1
|
1 port GX250 OC12-OC3-DS3 Transport Card
|
S
|
BIO3-OC3-4
|
BIO3 OC3 ATM/POS PHY
|
S
|
BIO3-OC12-1
|
BIO3 OC12 ATM/POS PHY
|
S
|
FT3-1
|
1-port Fractional T3 i/o card
|
S
|
BIO3-IP-SERVER
|
BIO3 IP Server PHY
|
S
|
BIO3-OC12X4
|
BIO3 OC48 channelized PHY
|
S
|
BIO3-OC48-1
|
BIO3 OC48c PHY
|
S
|
GCHN-E1T1-32
|
Granite Topaz Channalized E1/T1 card
|
S
|
BIO-OSU-1
|
BIO OSU PHY sub-card 1 port
|
S
|
BIO-OSU-4
|
BIO OSU PHY sub-card 4 port
|
S
|
PON-DS1-4
|
PON DS1 UNI sub-card 4 port
|
S
|
PON-DS1-8
|
PON DS1 UNI sub-card 8 port
|
S
|
PON-R1ETHER-1
|
PON R1.0 Ethernet UNI sub-card 1 port
|
S
|
PON-R2ETHER-1
|
PON R2.0 Ethernet UNI sub-card 1 port
|
S
|
Note For detailed information about the specific technologies and attributes supported by this NE, see Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Technologies.
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Technologies
The following technologies are supported by Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 switches in Cisco ANA 3.6 SP1:
•Base Logical Components
•Layer 1
•IP
•Physical Equipment
•ATM
•Frame Relay
Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches—Supported Service Events
Table 16 lists the supported service events for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 switches in Cisco ANA 3.6 SP1.
Table 16 Service Events for Alcatel-Lucent CBX 500, GX 550, B-STDX 9000 Switches
Event Name
|
|
interface status down/up
|
N
|
card in/out
|
N
|
link down/up
|
N
|
Device Unreachable
|
N
|
CPU Over Utilized
|
N
|
Memory Over utilize
|
N
|
Device Unsupported
|
N
|
Module Unsupported
|
N
|
Port Down
|
N
|
Rx Over utilized
|
N
|
Tx Over utilized
|
N
|
Card up/down
|
N
|
Supported Technologies on Alcatel-Lucent Devices
The following sections list the objects and attributes that are supported on Alcatel-Lucent devices in Cisco ANA 3.6 SP1 per technology:
•Base Logical Components
•Layer 1
•IP
•Ethernet (Physical)
•Physical Equipment
•Ethernet (Logical)
•ATM
•Frame Relay
•DSL
Note For more information about the objects and attributes described in this chapter, see Cisco Active Network Abstraction Technology Support and Information Model Reference Manual, Version 3.6 Service Pack 1.
Base Logical Components
Table 17 summarizes base logical component support on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 17 Base Logical Component Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
Managed Element Object (IMO Name—IManagedElement)
|
IP Address
|
Y
|
Y
|
Y
|
Communication State
|
Y
|
Y
|
Y
|
Investigation State
|
Y
|
Y
|
Y
|
Element Category
|
Y
|
Y
|
Y
|
Element Type and Key
|
Y
|
Y
|
Y
|
Device Name
|
Y
|
Y
|
Y
|
System Name
|
Y
|
Y
|
Y
|
System Description
|
Y
|
Y
|
Y
|
Up Time
|
Y
|
Y
|
Y
|
Software Version
|
Y
|
Y
|
Y
|
Vendor Identity
|
Y
|
Y
|
Y
|
Memory and CPU Usage
|
|
Y
|
Y
|
Agent Memory
|
Y
|
Y
|
Y
|
Number of Device Components
|
|
|
|
Number of Logical Entries
|
|
|
|
Layer 1
Table 18 summarizes Layer 1 attribute support on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 18 Layer 1 Attribute Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
Physical Layer Object (IMO Name—IPhysicalLayer)
|
Media Type
|
Y
|
Y
|
Y
|
Clocking Source
|
Y
|
|
Y
|
Maximum Speed
|
Y
|
Y
|
Y
|
Is Internal Port
|
Y
|
Y
|
Y
|
Maximum and Minimum Discarded Thresholds
|
Y
|
Y
|
Y
|
Discarded Bandwidth
|
|
|
|
Maximum and Minimum Dropped Thresholds
|
Y
|
Y
|
Y
|
Dropped Bandwidth
|
|
|
|
Maximum and Minimum Input Threshold
|
Y
|
Y
|
Y
|
Input Bandwidth
|
|
|
|
Maximum and Minimum Output Thresholds
|
Y
|
Y
|
Y
|
Output Bandwidth
|
|
|
|
Discarded and Received Input Data Counters
|
Y
|
Y
|
Y
|
Dropped and Forward Output Data Counters
|
Y
|
Y
|
Y
|
Administrative Status
|
Y
|
Y
|
Y
|
Operational Status
|
Y
|
Y
|
Y
|
Operational Status Date
|
Y
|
Y
|
Y
|
IANA Type
|
Y
|
Y
|
Y
|
IP
Table 19 summarizes IP attribute support on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 19 IP Attribute Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
IP Interface Object (IMO Name—IIPInterface)
|
IP Address
|
Y
|
Y
|
Y
|
Subnetwork Mask
|
Y
|
Y
|
Y
|
IP Interface Addresses
|
Y
|
Y
|
Y
|
Interface Name
|
Y
|
Y
|
Y
|
Interface Description
|
|
|
Y
|
IP Interface State
|
Y
|
Y
|
Y
|
OSPF Interface Cost
|
|
|
|
Broadcast Address
|
|
|
|
MTU
|
|
|
|
Lookup Method
|
|
|
|
Address Resolution Type
|
|
|
|
ARP Timeout
|
|
|
|
Secured ARP
|
|
|
|
ICMP Mask Reply
|
|
|
|
IGMP Proxy
|
|
|
|
HSRP Groups
|
|
|
|
IP Multiplexing Table
|
|
|
|
IANA Type
|
Y
|
Y
|
|
Routing Entry Object (IMO Name—IRoutingEntry)
|
Destination IP Subnet
|
Y
|
Y
|
Y
|
Next Hop IP Address
|
Y
|
Y
|
Y
|
Type
|
Y
|
Y
|
Y
|
Routing Protocol Type
|
Y
|
Y
|
Y
|
Outgoing Interface Name
|
Y
|
Y
|
Y
|
ARP Entry Object (IMO Name—IARPEntry)
|
IP Address
|
Y
|
|
|
MAC Address
|
Y
|
|
|
Port
|
Y
|
|
|
Entry Type
|
Y
|
|
|
HSRP Group Entry Object (IMO Name—HSRPGroupEntry)
|
Group Number
|
|
|
|
Port Description
|
|
|
|
Priority
|
|
|
|
Coupled Router
|
|
|
|
State
|
|
|
|
Tracking Interfaces
|
|
|
|
Virtual IP Address
|
|
|
|
Virtual MAC Address
|
|
|
|
Ethernet (Physical)
Table 20 summarizes support for physical Ethernet attributes on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 20 Ethernet Physical Attribute Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
Ethernet Channel Object (IMO Name—IEthernetChannel)
|
Channel Group
|
|
Y
|
|
Channel Bandwidth
|
|
|
|
IANA Type
|
|
Y
|
|
Ethernet Interface Object (IMO Name—IEthernet)
|
MAC Address
|
Y
|
Y
|
|
Duplex Mode
|
|
|
|
Output Flow Control
|
|
|
|
Input Flow Control
|
|
|
|
IANA Type
|
Y
|
|
|
Physical Equipment
Table 21 summarizes physical equipment support on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 21 Physical Equipment Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
Module/Board Object (IMO Name—Imodule)
|
Module Name
|
Y
|
Y
|
Y
|
Module Description
|
Y
|
Y
|
Y
|
Software Version
|
Y
|
Y
|
Y
|
Operational Status
|
Y
|
Y
|
Y
|
Hardware Type & Version
|
Y
|
Y
|
Y
|
Managed IP Address
|
Y
|
|
|
Redundant Equipment
|
|
Y
|
|
Configured Redundancy
|
|
Y
|
Y
|
Redundancy Status
|
Y
|
Y
|
Y
|
Operational Status Last Changed
|
Y
|
Y
|
Y
|
Supported Physical Termination Points
|
Y
|
Y
|
Y
|
Serial Number (soft property)
|
Y
|
Y
|
Y
|
Chassis Object (IMO Name—Ichassis)
|
Equipment Holder Type
|
Y
|
|
Y
|
Description
|
Y
|
|
Y
|
Serial Number
|
Y
|
Y
|
|
Ethernet (Logical)
Table 22 summarizes support for logical Ethernet attributes on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 22 Ethernet Logical Attribute Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
VLAN Encapsulation Object (IMO Name—IIEEE802)
|
VLAN Identification
|
Y
|
Y
|
|
Binding Information
|
|
|
|
Binding Status
|
|
|
|
IANA Type
|
Y
|
|
|
Bridging Entry Object (IMO Name—IBridgeEntry)
|
Destination MAC Address
|
Y
|
Y
|
|
Outgoing Interface
|
Y
|
|
|
ATM
Table 23 summarizes support for Asynchronous Transfer Mode (ATM) attributes on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 23 ATM Attribute Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
ATM Interface Object (IMO Name—IAtm)
|
ATM Address
|
|
|
|
Interface Type
|
|
|
Y
|
VP and VC Ranges
|
Y
|
|
Y
|
VC Table
|
Y
|
|
Y
|
Cross-Connect Table
|
|
|
Y
|
IANA Type
|
|
|
Y
|
ATM VC Object (IMO Name—IAtmVc)
|
Virtual Channel Identifier
|
Y
|
|
Y
|
Virtual Path Identifier
|
Y
|
|
Y
|
Shaping Profile
|
|
|
|
Discarded and Received Input Data Counters
|
Y
|
|
Y
|
Dropped and Forward Output Data Counters
|
Y
|
|
Y
|
Ingress Traffic Descriptor
|
Y
|
|
Y
|
Egress Traffic Descriptor
|
Y
|
|
Y
|
Administrative Status
|
Y
|
|
Y
|
Operational Status
|
Y
|
|
Y
|
IANA Type
|
|
|
|
Virtual Connection Encapsulation Object (IMO Name—IVcBasedEncapsulation)
|
Virtual Connection Interface
|
|
|
|
Binding Information
|
|
|
|
Binding Status
|
Y
|
|
|
IANA Type
|
|
|
|
ATM Traffic Descriptor Object (IMO Name—IAtmTrafficDescriptor)
|
Traffic Descriptor Type
|
Y
|
|
Y
|
Service Category
|
Y
|
|
Y
|
Cell Loss Priority
|
Y
|
|
Y
|
Cell Delay Variation
|
Y
|
|
|
Cell Delay Variation Tolerance
|
Y
|
|
Y
|
Maximum High Priority and Aggregate Burst Rates
|
Y
|
|
Y
|
Minimum High Priority and Aggregate Cell Rates
|
Y
|
|
Y
|
Sustainable High Priority and Aggregate Cell Rates
|
Y
|
|
Y
|
Peak High Priority and Aggregate Cell Rates
|
Y
|
|
Y
|
Name
|
Y
|
|
|
Index
|
Y
|
|
|
ATM Access Traffic Descriptor Object (IMO Name—IAtmAccessTrafficDescriptor)
|
Scope
|
Y
|
|
|
Maximum Active VPCs and VCCs
|
Y
|
|
|
Maximum Supported VPI and VCI Bits
|
Y
|
|
|
Generic Flow Control Mode
|
Y
|
|
|
Police Mode
|
Y
|
|
|
Name
|
Y
|
|
|
Index
|
Y
|
|
|
ATM Logical Interface Object (IMO Name—IAtmLogicalPort/Trunk)
|
Same as ATM interface
|
|
|
Y
|
Frame Relay
Table 24 summarizes support for Frame Relay attributes on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 24 Frame Relay Attribute Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
Frame Relay Interface Object (IMO Name—Iframerelay/IFrTrunk)
|
Address Format
|
|
|
|
Maximum Supported VCs
|
|
|
Y
|
Protocol Type
|
|
|
Y
|
VC Table
|
|
|
Y
|
Cross-Connect Table
|
|
|
Y
|
IANA Type
|
|
|
|
Frame Relay VC Object (IMO Name—IFrVc)
|
Data Link Connection Identifier
|
|
|
Y
|
Traffic Descriptor
|
|
|
Y
|
Discard and Received Input Data Counters
|
|
|
|
Dropped and Forward Output Data Counters
|
|
|
|
Ingress Traffic Descriptor
|
|
|
Y
|
Egress Traffic Descriptor
|
|
|
Y
|
Administrative Status
|
|
|
Y
|
Operational Status
|
|
|
Y
|
IANA Type
|
|
|
|
Frame Relay Traffic Descriptor Object (IMO Name—IFRTrafficDescriptor)
|
Committed Rate
|
|
|
Y
|
Excess Burst Rate
|
|
|
Y
|
Name
|
|
|
Y
|
Index
|
|
|
Y
|
Frame Relay Logical Interface Object (IMO Name—IFramerelayLogicalPort/Trunk)
|
Same as IFrameRelay
|
|
|
Y
|
DSL
Table 25 summarizes support for digital subscriber line (DSL) attributes on Alcatel-Lucent devices in Cisco ANA 3.6 SP1.
Table 25 DSL Attribute Support on Alcatel-Lucent Devices
Attribute
|
|
|
|
DSL Interface Object (IMO Name—IDsl)
|
Modulation Type
|
|
|
|
Customer Identification
|
Y
|
|
|
Traffic Descriptor
|
Y
|
|
|
IANA Type
|
|
|
|
ADSL Interface Object (IMO Name—IADsl)
|
Maximum Reception and Transmission Bandwidth
|
Y
|
|
|
Same as Idsl
|
|
|
|
Spectrum Traffic Descriptor
|
Y
|
|
|
Traffic Descriptor
|
Y
|
|
|
Same as IADsl
|
|
|
|
