Table Of Contents
Support Information for Cisco Switches
Cisco Catalyst 4500 Series Switches
Cisco Catalyst 4500 Series—Supported Software Versions
Cisco Catalyst 4500 Series—Supported Topologies
Cisco Catalyst 4500 Series—Supported Modules
Cisco Catalyst 4500 Series—Supported Technologies
Cisco Catalyst 4500 Series—Supported Events
Cisco Catalyst 6500 Series (IOS) Switches
Cisco Catalyst 6500 Series (IOS)—Supported Software Versions
Cisco Catalyst 6500 Series (IOS)—Supported Topologies
Cisco Catalyst 6500 Series (IOS)—Supported Modules
Cisco Catalyst 6500 Series (IOS)—Supported Technologies
Cisco Catalyst 6500 Series (IOS)—Supported Events
Cisco Catalyst 6500 Series (CatOS) Switches
Cisco Catalyst 6500 Series (CatOS)—Supported Software Versions
Cisco Catalyst 6500 Series (CatOS)—Supported Topologies
Cisco Catalyst 6500 Series (CatOS)—Supported Modules
Cisco Catalyst 6500 Series (CatOS)—Supported Technologies
Cisco Catalyst 6500 Series (CatOS)—Supported Service Events
Supported Technologies on Cisco Switches
Base Logical Components
Layer 1
IP
Routing Protocols
Ethernet (Physical)
Physical Equipment
Ethernet (Logical)
ATM
HDLC
MPLS
VPN
QoS
Q-in-Q (Switch Port)
Q-in-Q (Routed Switch)
STP
Support Information for Cisco Switches
This chapter contains the Virtual Network Element (VNE) device support information in Cisco ANA 3.6 for the following devices:
•
Cisco Catalyst 4500 Series Switches
•Cisco Catalyst 6500 Series (IOS) Switches
•Cisco Catalyst 6500 Series (CatOS) Switches
For information about the technologies supported by each of these VNEs, see Supported Technologies on Cisco Switches.
Note For information about the syslogs and traps supported by Cisco ANA 3.6 on Cisco Catalyst devices, see Cisco Active Network Abstraction Fault Management User Guide, Version 3.6.
Cisco Catalyst 4500 Series Switches
This section includes the following information about Cisco Catalyst 4500 Series switches:
•Cisco Catalyst 4500 Series—Supported Software Versions
•Cisco Catalyst 4500 Series—Supported Topologies
•Cisco Catalyst 4500 Series—Supported Modules
•Cisco Catalyst 4500 Series—Supported Technologies
•Cisco Catalyst 4500 Series—Supported Events
Cisco Catalyst 4500 Series—Supported Software Versions
Table 38 lists the supported software versions for Cisco Catalyst 4500 Series switches in Cisco ANA 3.6.
Table 38 Supported Software Versions for Cisco Catalyst 4500 Series Switches
Software Version
|
|
IOS 12.1(12c)EW1
|
V
|
IOS 12.2(20)EWA1
|
V
|
IOS 12.2(25)SG
|
V
|
IOS 12*
|
S
|
Note Software versions marked with an asterisk (representing a wildcard) are supported by Cisco ANA 3.6. Specific software versions that have been tested and verified are listed individually and marked as V.
Cisco Catalyst 4500 Series—Supported Topologies
The following topologies are supported for Cisco Catalyst 4500 Series switches in Cisco ANA 3.6:
•MAC
•CDP
Cisco Catalyst 4500 Series—Supported Modules
Table 39 lists the supported modules for Cisco Catalyst 4500 Series switches in Cisco ANA 3.6.
Table 39 Supported Modules for Cisco Catalyst 4500 Series Switches
Module Name
|
Module Description
|
|
WS-X4013+
|
Catalyst 4500 Supervisor II-Plus (IOS), 2GE,Console(RJ-45)
|
S
|
WS-X4013+TS
|
Catalyst 4503 SupII-Plus-TS, 12 10/100/1000 PoE+8 SFP slots
|
S
|
WS-X4014
|
Supervisor Engine III
|
S
|
WS-X4515
|
Catalyst 4500 Supervisor IV (2 GE),Console(RJ-45)
|
S
|
WS-X4516
|
Catalyst 4500 Supervisor V (2 GE),Console(RJ-45)
|
S
|
WS-X4516-10GE
|
Catalyst 4500 Supervisor V-10GE, 2x10GE (X2) and 4x1GE (SFP)
|
S
|
WS-X4124-FX-MT
|
24-Port 100BASE-FX Fast Ethernet Switching Module
|
S
|
WS-X4148-FX-MT
|
Catalyst 4500 FE Switching Module, 48-100FX MMF(MTRJ)
|
S
|
WS-X4148-RJ
|
Catalyst 4500 10/100 Auto Module, 48-Ports (RJ-45)
|
S
|
WS-X4148-RJ21
|
Catalyst 4500 10/100 Module, 48-Ports Telco (4xRJ21)
|
S
|
WS-X4148-RJ45V
|
10/100BASE-TX Fast Ethernet switching module with Cisco pre-standard PoE
|
S
|
WS-X4248-FE-SFP
|
Catalyst 4500 48-Port 100BASE-X (SFPs Optional)
|
S
|
WS-X4224-RJ45V
|
Catalyst 4500 10/100 PoE 802.3af 24-ports (RJ45)
|
S
|
WS-X4248-RJ21V
|
Catalyst 4500 PoE 802.3af 10/100, 48-Ports (RJ21)
|
S
|
WS-X4248-RJ45V
|
Catalyst 4500 PoE 802.3af 10/100, 48-Ports (RJ45)
|
S
|
WS-X4232-GB-RJ
|
Catalyst 4500 32-10/100 (RJ-45),2-GE(GBIC)
|
S
|
WS-X4232-RJ-XX
|
Catalyst 4500 10/100 Module,32-ports(RJ45)+Modular uplinks
|
S
|
WS-U4504-FX-MT
|
Catalyst 4500 4-port 100FX(MTRJ) Uplink for WS-X4232-RJ-XX
|
S
|
WS-X4302-GB
|
Catalyst 4500 Gigabit Ethernet Module, 2-Ports (GBIC)
|
S
|
WS-X4306-GB
|
Catalyst 4500 Gigabit Ethernet Module, 6-Ports (GBIC)
|
S
|
WS-X4506-GB-T
|
Catalyst 4500 6-Port 10/100/1000 PoE or SFP (Optional)
|
S
|
WS-X4412-2GB-T
|
1000BASE-T plus 1000BASE-X Gigabit Ethernet switching module
|
S
|
WS-X4418-GB
|
Catalyst 4500 GE Module, Server Switching 18-Ports (GBIC)
|
S
|
WS-X4424-GB-RJ45
|
Catalyst 4500 24-port 10/100/1000 Module (RJ45)
|
S
|
WS-X4448-GB-LX
|
1000BASE-X Gigabit Ethernet switching module
|
S
|
WS-X4448-GB-RJ45
|
Catalyst 4500 48-Port 10/100/1000 Module (RJ45)
|
S
|
WS-X4524-GB-RJ45V
|
Catalyst 4500 PoE 802.3af 10/ 100/1000 24-ports (RJ45)
|
S
|
WS-X4548-GB-RJ45
|
Catalyst 4500 Enhanced 48-Port 10/100/1000 Base-T (RJ-45)
|
S
|
WS-X4448-GB-SFP
|
Catalyst 4500 48-Port 1000Base-X (SFPs Optional)
|
S
|
WS-X4548-GB-RJ45V
|
Catalyst 4500 PoE 802.3af 10/100/1000, 48-Ports (RJ45)
|
S
|
WS-X4604-GWY
|
Catalyst 4000 Access Gateway Module
|
|
WS-X4232-L3
|
Layer 3 Services Module
|
S
|
WS-X4148-FE-BD-LC
|
48-Port 100BASE-BX10-D Fast Ethernet Switching Module
|
S
|
WS-X4148-FE-LX-MT
|
48-Port 100Base-LX-MT Fast Ethernet Switching Module
|
S
|
WS-X4124-RJ45
|
24-Port 10/100BASE-TX Fast Ethernet Switching Module
|
S
|
Note For detailed information about the specific technologies and attributes supported by this NE, see Cisco Catalyst 4500 Series—Supported Technologies.
Cisco Catalyst 4500 Series—Supported Technologies
The following technologies are supported by the Cisco Catalyst 4500 Series in Cisco ANA 3.6:
•Base Logical Components
•Layer 1
•IP
•Ethernet (Physical)
•Physical Equipment
•Ethernet (Logical)
•STP
Cisco Catalyst 4500 Series—Supported Events
Table 40 lists the supported service events for Cisco Catalyst 4500 Series switches in Cisco ANA 3.6.
Table 40 Service Events for Cisco Catalyst 4500 Series Switches
Event Name
|
|
card in/out
|
Y
|
link down/up
|
Y
|
Device Unreachable
|
N
|
CPU Over Utilized
|
N
|
Memory Over utilize
|
N
|
Device Unsupported
|
N
|
Module Unsupported
|
N
|
Port Flapping
|
N
|
Port Down
|
Y
|
Cloud Problem
|
N
|
Card up/down
|
Y
|
Cisco Catalyst 6500 Series (IOS) Switches
This section includes the following information about Cisco Catalyst 6500 Series (IOS) switches:
•Cisco Catalyst 6500 Series (IOS)—Supported Software Versions
•Cisco Catalyst 6500 Series (IOS)—Supported Topologies
•Cisco Catalyst 6500 Series (IOS)—Supported Modules
•Cisco Catalyst 6500 Series (IOS)—Supported Technologies
•Cisco Catalyst 6500 Series (IOS)—Supported Events
Cisco Catalyst 6500 Series (IOS)—Supported Software Versions
Table 41 lists the supported software versions for Cisco Catalyst 6500 Series (IOS) switches in Cisco ANA 3.6.
Table 41 Supported Software Versions for Cisco Catalyst 6500 Series (IOS) Switches
Software Version
|
|
IOS 12.2(18)SXD
|
V
|
IOS 12.2(18)SXD5
|
V
|
IOS 12.2(18)SXE6b
|
V
|
IOS 12.2(33)SRA
|
V
|
IOS 12.2(33)SRA2
|
V
|
IOS 12.2(33)SRB
|
V
|
IOS 12.2(18)SXE*
|
S
|
IOS 12.2(18)SXF*
|
S
|
IOS 12.2(33*
|
S
|
IOS 12.3*
|
S
|
IOS 12.4*
|
S
|
Note Software versions marked with an asterisk (representing a wildcard) are supported by Cisco ANA 3.6. Specific software versions that have been tested and verified are listed individually and marked as V.
Cisco Catalyst 6500 Series (IOS)—Supported Topologies
The following topologies are supported for Cisco Catalyst 6500 Series (IOS) switches in Cisco ANA 3.6:
•IP
•MAC
•CDP
•MPLS
Cisco Catalyst 6500 Series (IOS)—Supported Modules
Table 42 lists the supported modules for Cisco Catalyst 6500 Series (IOS) switches in Cisco ANA 3.6.
Table 42 Supported Modules for Cisco Catalyst 6500 Series (IOS) Switches
Module Name
|
Module Description
|
|
WS-SUP720-3BXL
|
Supervisor Engine 720 with PFC3BXL
|
V
|
WS-SUP720-3B
|
Supervisor Engine 720 with PFC3B
|
V
|
WS-SUP32-10GE-3B
|
Supervisor Engine 32
|
S
|
WS-SUP32-GE-3B
|
Supervisor Engine 32
|
S
|
WS-X6700-CFC
|
Centralized Forwarding Card
|
S
|
WS-F6K-PFC3BXL
|
Policy Feature Card 3BXL (PFC3BXL)
|
V
|
WS-F6700-DFC3BXL
|
Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules
|
S
|
WS-F6700-DFC3CXL
|
Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules
|
S
|
WS-F6700-DFC3C
|
Distributed Forwarding Card 3C (DFC3C) for use on CEF720 modules
|
S
|
WS-X6704-10GE
|
4-port 10-Gigabit Ethernet
|
S
|
WS-X6502-10GE
|
1-port 10-Gigabit Ethernet
|
S
|
WS-G6488
|
10GBASE-LR serial 1310 nm long-reach OIM
|
S
|
WS-G6483
|
10GBASE-ER serial 1550 nm extended-reach OIM
|
S
|
XENPAK-10GB-SR
|
10GBASE-SR Serial 850-nm short-reach multimode fiber (MMF)
|
S
|
XENPAK-10GB-ER
|
10GBASE-ER Serial 1550-nm extended-reach, single-mode fiber (SMF), dispersion-shifted fiber (DSF)
|
S
|
WS-X6748-SFP
|
48-port Gigabit Ethernet SFP
|
S
|
WS-X6724-SFP
|
24-port Gigabit Ethernet SFP
|
S
|
WS-X6816-GBIC
|
16-port Gigabit Ethernet GBIC
|
S
|
WS-X6516A-GBIC
|
16-port Gigabit Ethernet GBIC
|
S
|
WS-X6516-GBIC
|
16-port Gigabit Ethernet GBIC
|
S
|
WS-X6416-GBIC
|
16-port Gigabit Ethernet GBIC
|
S
|
WS-X6316-GE-TX
|
16-port Gigabit Ethernet RJ-45
|
S
|
WS-X6408A-GBIC
|
8-port Gigabit Ethernet GBIC Enhanced QoS Module
|
S
|
WS-X6408-GBIC
|
8-port Gigabit Ethernet GBIC
|
S
|
WS-F6K-FE48X2-AF
|
IEEE 802.3af PoE daughtercard
|
S
|
WS-F6K-GE48-AF
|
IEEE 802.3af PoE daughtercard
|
S
|
WS-F6K-VPWR-GE
|
PoE Daughtercard
|
S
|
WS-F6K-VPWR
|
PoE Daughtercard
|
S
|
WS-X6748-GE-TX
|
48 port 10/100/1000 RJ-45 Ethernet Switching Module
|
S
|
WS-X6548-GE-TX
|
48 port 10/100/1000 RJ-45 Ethernet Switching Module
|
S
|
WS-X6148A-GE-TX
|
48 port 10/100/1000 RJ-45 Ethernet Switching Module
|
S
|
WS-X6148-GE-TX
|
48 port 10/100/1000 RJ-45 Ethernet Switching Module
|
S
|
WS-X6516-GE-TX
|
16 port 10/100/1000 Base-T Ethernet Switching Module
|
S
|
WS-X6148-FE-SFP
|
48 port 100BASE-FX Fast Ethernet Switching Module
|
S
|
WS-X6324-100FX-SM
|
24 port 100FX SingleMode Fast Ethernet Switching Module
|
S
|
WS-X6548-RJ-45
|
48 port 10/100TX RJ-45 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6548-RJ-21
|
48 port 10/100TX RJ-21 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6148X2-RJ-45
|
96 port 10/100TX RJ-45 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6196-RJ-21
|
96 port 10/100TX RJ-21 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6348-RJ-45
|
48 port 10/100TX RJ-45 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6248-RJ-45
|
48 port 10/100TX RJ-45 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6248A-TEL
|
48 port 10/100TX RJ-21 Enhanced Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6248-TEL
|
48 port 10/100TX RJ-21 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6148-RJ-45
|
48 port 10/100TX RJ-45 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6148A-RJ-45
|
48 port 10/100TX RJ-45 Ethernet/Fast Ethernet Switching Module
|
S
|
WS-X6148-RJ-21
|
48 port 10/100TX RJ-21 Ethernet/Fast Ethernet Switching Module
|
S
|
OSM-2+4GE-WAN+
|
4-port Gigabit Ethernet WAN (GBIC) with two Layer 2 LAN ports; CEF256
|
S
|
OSM-1OC48-POS-SI+
|
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-IR
|
S
|
OSM-1OC48-POS-SL+
|
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-LR
|
S
|
OSM-1OC48-POS-SS+
|
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-SR
|
S
|
OSM-4OC12-POS-SI+
|
Enhanced 4-port OC-12c/STM-4c POS, SM-IR; CEF256
|
S
|
OSM-2OC12-POS-SI+
|
Enhanced 2-port OC-12c/STM-4c POS, SM-IR; CEF256
|
S
|
OSM-4OC3-POS-SI+
|
Enhanced 4-port OC-3c/STM-1c POS, SM-IR;
|
S
|
OSM-1CHOC12T3-SI
|
1-port channelized OC-12, SM-IR
|
S
|
OSM-12CT3T1
|
12-port channelized/unchannelized CT3-T1
|
S
|
OSM-2OC12-ATM-MM+
|
Enhanced 2-port OC-12/STM-4 ATM OSM, MM
|
S
|
OSM-2OC12-ATM-SI+
|
Enhanced 2-port OC-12/STM-4 ATM OSM, SM-IR
|
S
|
7600-SIP-600
|
SPA Interface Processor-600
|
S
|
7600-SIP-400
|
SPA Interface Processor-400
|
S
|
7600-SIP-200
|
SPA Interface Processor-200
|
S
|
SPA-1XTENGE-XFP
|
1-port 10 Gigabit Ethernet SPA, LANPHY XFP Optics
|
S
|
SPA-10X1GE
|
10-port Gigabit Ethernet SPA, SFP Optics
|
S
|
SPA-5X1GE
|
5-port Gigabit Ethernet SPA, SFP Optics
|
S
|
SPA-2X1GE
|
2-port Gigabit Ethernet SPA, SFP Optics
|
S
|
SPA-2XOC3-POS
|
2-port OC-3c/STM-1c POS SPA
|
S
|
SPA-4XOC3-POS
|
4-port OC-3c/STM-1c POS SPA
|
S
|
SPA-1XOC12-POS
|
1-port OC-12c/STM-4c POS SPA
|
S
|
SPA-OC192POS-LR
|
1-port OC-192c/STM-64 POS/RPR SPA, SM-LR
|
S
|
SPA-OC192POS-XFP
|
1-port OC-192c/STM-64 POS/RPR SPA, XFP Optics
|
S
|
SPA-2XOC3-ATM
|
2-port OC-3c/STM-1c ATM SPA
|
S
|
SPA-4XOC3-ATM
|
4-port OC-3c/STM-1c ATM SPA
|
S
|
SPA-1XOC12-ATM
|
1-Port OC-12c/STM-4c ATM SPA
|
S
|
SPA-1XOC48-ATM
|
1 port OC-48c/STM-16 ATM SPA
|
S
|
SPA-8XCHT1E1
|
8-Port Channelized T1/E1 SPA
|
S
|
SPA-2XT3/E3
|
2-port Clear Channel T3/E3 SPA
|
S
|
SPA-4XT3/E3
|
4-port Clear Channel T3/E3 SPA
|
S
|
SPA-2XCT3/DS0
|
2-port Channelized T3 to DS0 SPA
|
S
|
SPA-4XCT3/DS0
|
4-port Channelized T3 to DS0 SPA
|
S
|
SPA-24CHT1-CE-ATM
|
24-Port Channelized T1/E1/J1 ATM CEoP SPA
|
S
|
WS-X6582-2PA
|
Enhanced FlexWAN Module;
|
S
|
PA-2FE-TX, -FX
|
2-port Fast Ethernet port adapter
|
S
|
PA-1FE-TX, -FX
|
1-port Fast Ethernet port adapter
|
S
|
PA-POS-2OC3
|
2-port POS OC3c/STM1 port adapter
|
S
|
SFP-OC3-MM
|
Short range, multimode fiber
|
S
|
SFP-OC3-IR1
|
Intermediate range, single-mode fiber
|
S
|
SFP-OC3-LR1
|
Long range, single-mode fiber
|
S
|
PA-A3-T3
|
ATM with traffic shaping port adapters
|
S
|
PA-A3-E3
|
ATM with traffic shaping port adapters
|
S
|
PA-4T+
|
T1/E1 port adapters
|
S
|
PA-MC-8T1
|
T1/E1 port adapters
|
S
|
PA-MC-4T1
|
T1/E1 port adapters
|
S
|
PA-MC-STM-1
|
Multichannel STM-1 port adapters
|
S
|
WS-SVC-MWAM-1
|
Multi-Processor WAN Application Module
|
S
|
WS-SVC-NAM-1
|
Network Analysis module 1
|
S
|
WS-SVC-NAM-2
|
Network Analysis module 2
|
S
|
WS-C6509-E-FAN
|
High-capacity fan tray
|
S
|
WS-CAC-6000W
|
6000W AC power supply
|
S
|
Note For detailed information about the specific technologies and attributes supported by this NE, see Cisco Catalyst 6500 Series (IOS)—Supported Technologies.
Cisco Catalyst 6500 Series (IOS)—Supported Technologies
The following technologies are supported by the Cisco Catalyst 6500 Series (IOS) in Cisco ANA 3.6:
•Base Logical Components
•Layer 1
•IP
•Routing Protocols
•Ethernet (Physical)
•Physical Equipment
•Ethernet (Logical)
•ATM
•HDLC
•MPLS
•VPN
•QoS
•Q-in-Q (Switch Port)
•Q-in-Q (Routed Switch)
•STP
Cisco Catalyst 6500 Series (IOS)—Supported Events
Table 43 lists the supported service events for Cisco Catalyst 6500 Series (IOS) switches in Cisco ANA 3.6.
Table 43 Service Events for Cisco Catalyst 6500 Series (IOS) Switches
Event Name
|
|
Primary HSRP interface inactive/ active
|
N
|
Secondary HSRP interface inactive/active
|
N
|
All ip interfaces down active ip interfaces found
|
Y
|
interface status down/up
|
Y
|
card in/out
|
Y
|
link down/up
|
Y
|
Device Unreachable
|
N
|
CPU Over Utilized
|
N
|
Memory Over utilize
|
N
|
Device Unsupported
|
N
|
Discard Packets
|
N
|
Dropped Packets
|
N
|
Module Unsupported
|
N
|
Port Flapping
|
N
|
Port Down
|
Y
|
Rx Over utilized
|
N
|
Tx Over utilized
|
N
|
VPN leak
|
N
|
Cloud Problem
|
N
|
Broken LSP discovered
|
N
|
MPLS Black hole
|
N
|
Layer 2 Tunnel Down
|
N
|
MPLS TE Tunnel Down/Flapping
|
N
|
BGP Neighbor Down
|
N
|
Card up/down
|
Y
|
Cisco Catalyst 6500 Series (CatOS) Switches
This section includes the following information about Cisco Catalyst 6500 Series (CatOS) switches:
•Cisco Catalyst 6500 Series (CatOS)—Supported Software Versions
•Cisco Catalyst 6500 Series (CatOS)—Supported Topologies
•Cisco Catalyst 6500 Series (CatOS)—Supported Modules
•Cisco Catalyst 6500 Series (CatOS)—Supported Technologies
•Cisco Catalyst 6500 Series (CatOS)—Supported Service Events
Cisco Catalyst 6500 Series (CatOS)—Supported Software Versions
Table 44 lists the supported software versions for Cisco Catalyst 6500 Series (CatOS) switches in Cisco ANA 3.6.
Table 44 Supported Software Versions for Cisco Catalyst 6500 Series (CatOS) Switches
Software Version
|
|
CatOS 6.4(10)
|
V
|
CatOS 7.6(1)
|
V
|
Cisco Catalyst 6500 Series (CatOS)—Supported Topologies
The following topologies are supported for Cisco Catalyst 6500 Series (CatOS) switches in Cisco ANA 3.6:
•IP
•MAC
•CDP
Cisco Catalyst 6500 Series (CatOS)—Supported Modules
Table 45 lists the supported modules for Cisco Catalyst 6500 Series (CatOS) switches in Cisco ANA 3.6.
Table 45 Supported Modules for Cisco Catalyst 6500 Series (CatOS) Switches
Module Name
|
Module Description
|
|
CAT6K-WSX-6548-RJ21
|
Catalyst 6500 48 port 10/100BaseTX =RJ-21=
|
V
|
CAT6K-WSX-6248A-RJ45
|
Catalyst 6000 48-port 10/100BaseTX RJ-45
|
V
|
WSX-6408A-GBIC
|
Catalyst 6000 8-port Gigabit Ethernet Module
|
V
|
CAT6K-WSX-6524-MMMT
|
Catalyst 6500 24 port 100BaseX MM (MT-RJ) module
|
V
|
CAT6K-WSX-6515-GETX
|
Catalyst 6500 16 port 10/100/1000BaseT (RJ-45) module
|
V
|
WS-F6K-PWR(inline power card)
|
CATALYST 6000 INLINE POWER CARD, REF
|
V
|
Catalyst 6500 Firewall Module
|
Catalyst 6500 Firewall Module
|
V
|
CAT6K-WSX-6516A-GBIC
|
Catalyst 6500 16 port 1000BaseX (GBIC)
|
V
|
CAT6K-WSX-6548-RJ45
|
48 port 10/100 Hydra2+/Hydra2V+
|
V
|
CAT6K-WSX-SUP2-2GE
|
Supervisor 2 with 2 Gigabit Ethernet ports
|
V
|
CAT6K-WSX-6516-GBIC
|
Catalyst 6500 16 port 1000BaseX GBIC
|
V
|
CAT6K-WSX-SUP1A-2GE
|
Catalyst 6500 2 port 1000BaseX Supervisor module (GBIC)
|
V
|
WSX-6408-GBIC
|
Card with 8 Gigabit Ethernet ports for the Catalyst 6000 series
|
V
|
CAT6K-MSFC2
|
Multilevel Switching Feature Card Version 2 for the Catalyst 6000 series
|
V
|
CAT6K-WSX-6416-GBIC
|
16-port GBIC Gigabit ethernet module
|
V
|
CAT6K-WSX-6348-RJ45
|
48-port 10/100 ethernet module
|
V
|
CAT6K-MSFC
|
Multilevel Switching Feature Card for the Catalyst 6000 series
|
V
|
CAT6K-WSX-6248-RJ45
|
Catalyst 6000 Family 48-port 10/100 RJ-45 module
|
V
|
CAT6K-WSX-6066-SLB-APC
|
Content Switching Module
|
V
|
PA-AH1T
|
pa-ah1t
|
V
|
PA-AH2T
|
pa-ah2t
|
V
|
PA-A4T
|
pa-a4t
|
V
|
PA-A8T-V35
|
pa-a8t-v35
|
V
|
CAT6K-WS-SUP720
|
Catalyst 6500 Supervisor Module 720 CPU board
|
V
|
CAT6K-WS-SUP720-BASE
|
Catalyst 6500 Supervisor Module 720 base board
|
V
|
CAT6K-WSX-6748-GETX
|
Catalyst 6500 48 port 10/100/1000 (RJ-45)
|
V
|
CAT6K-WSX-6704-10GE
|
Catalyst 6500 4 port 10 GE
|
V
|
CEF720 48 PORT 1000MB SFP
|
Catalyst 6500 48 port 1000Base FX (SFP GBIC)
|
V
|
CAT6K-WSX-6724-SFP
|
Catalyst 6500 24 port 1000Base FX (SFP GBIC)
|
V
|
PA-ATMDX-DS3
|
pa-atmdx-ds3
|
V
|
CAT6K-WSF-6K-PFC3A
|
Catalyst 6500 Centralized L3 switching engine IIIa
|
V
|
CAT6K-WSF-6K-DFC3A
|
Catalyst 6500 Distributed L3 switching engine IIIa
|
V
|
CAT6K-WSX-6148-GE-TX
|
48-port-10-100-1000-MB-EtherModule
|
V
|
CAT6K-WSX-6148-RJ45
|
48 port10/100BaseTX(RJ-45) module
|
V
|
CAT6K-WSX-6548-GETX
|
Catalyst 6500 48 port 10/100/1000 (RJ-45)
|
V
|
CAT6K-WS-SVC-IDSM2
|
Catalyst 6500 Intrusion Detection Module
|
V
|
PA-ATMDX-E3
|
pa-atmdx-e3
|
V
|
CAT6K-WSF-6K-VPWR-GE
|
Cat6k voice daughter cards
|
V
|
CAT6K-WSF-6700-CFC
|
Catalyst 6500 centralized Forwarding Card
|
V
|
CAT6K-WS-SUP32-GE-3B
|
cat6k-ws-sup32-ge-3b
|
V
|
PA-ATMDX-SML-OC3
|
pa-atmdx-sml-oc3
|
V
|
MSFC2A Route Engine
|
MSFC2A Route Engine
|
V
|
PA-ATMDX-SMI-OC3
|
pa-atmdx-smi-oc3
|
V
|
Policy Feature Card 3
|
Policy Feature Card 3
|
V
|
PA-ATMDX-MM-OC3
|
pa-atmdx-mm-oc3
|
V
|
GSR-ALARM16
|
gsr-alarm16
|
V
|
OC192-POS-RPR1
|
1 port OC-192c/STM-64 POS/RPR single mode very short reach Shared Port Adapter
|
V
|
PA-2FEISL-TX
|
pa-2feisl-tx
|
V
|
WVIC-2DSU-T1(V2)
|
wvic-2dsu-t1(V2)
|
V
|
PA-POSSW-SM
|
pa-possw-sm
|
V
|
PA-POSSW-MM
|
pa-possw-mm
|
V
|
PA-POSSW-LR
|
pa-possw-lr
|
V
|
PA-1T3-PLUS
|
pa-1t3-plus
|
V
|
PA-2T3-PLUS
|
pa-2t3-plus
|
V
|
PA-8CE1
|
pa-8ce1
|
V
|
PA-CE3
|
pa-ce3
|
V
|
RP
|
ROMmon Recovery Procedure
|
V
|
PM-1FE-1T1
|
pm-1fe-1t1
|
V
|
HDV
|
High Density Voice module
|
V
|
POS-OC12-MM
|
pos-oc12-mm
|
V
|
WS-C6500-SFM
|
Switch Fabric Module
|
V
|
WS-X6500-SFM2
|
Switch Fabric Module 2
|
V
|
WS-SUP720-3BXL
|
Catalyst 6500/Cisco 7600 Supervisor 720 Fabric MSFC3 PFC3BXL
|
V
|
WS-X6148-FE-SFP
|
Cisco Catalyst 6500 48-port 100BASE-X SFP Module
|
V
|
WS-SVC-ADM-1-K9
|
Catalyst 6500 Cisco Anomaly Detection Module
|
V
|
WS-SVC-AGM-1-K9
|
Catalyst 6500 Cisco Anomaly Guard Module
|
V
|
WS-SVC-SSL-1-K9
|
SSL Module for Catalyst 6500
|
V
|
Note For detailed information about the specific technologies and attributes supported by this NE, see Cisco Catalyst 6500 Series (CatOS)—Supported Technologies.
Cisco Catalyst 6500 Series (CatOS)—Supported Technologies
The following technologies are supported by the Cisco Catalyst 6500 Series (CatOS) in Cisco ANA 3.6:
•Base Logical Components
•Layer 1
•IP
•Ethernet (Physical)
•Physical Equipment
•Ethernet (Logical)
•HDLC
•Q-in-Q (Switch Port)
•STP
Cisco Catalyst 6500 Series (CatOS)—Supported Service Events
Table 46 lists the supported service events for Cisco Catalyst 6500 Series (CatOS) switches in Cisco ANA 3.6.
Table 46 Service Events for Cisco Catalyst 6500 Series (CatOS) Switches
Event Name
|
|
card in/out
|
Y
|
link down/up
|
Y
|
Device Unreachable
|
N
|
CPU Over Utilized
|
N
|
Memory Over utilize
|
N
|
Device Unsupported
|
N
|
Module Unsupported
|
N
|
Port Flapping
|
N
|
Port Down
|
Y
|
Cloud Problem
|
N
|
Card up/down
|
Y
|
Supported Technologies on Cisco Switches
The following sections list the objects and attributes that are supported on Cisco switches in Cisco ANA 3.6 per technology:
•Base Logical Components
•Layer 1
•IP
•Routing Protocols
•Ethernet (Physical)
•Physical Equipment
•Ethernet (Logical)
•ATM
•HDLC
•MPLS
•VPN
•QoS
•Q-in-Q (Switch Port)
•Q-in-Q (Routed Switch)
•STP
Note For more information about the objects and attributes described in this chapter, see Cisco Active Network Abstraction Technology Support and Information Model Reference Manual, Version 3.6.
Base Logical Components
Table 47 summarizes base logical component support on Cisco switches in Cisco ANA 3.6.
Table 47 Base Logical Component Support on Cisco Switches
Attribute
|
|
|
|
|
|
Managed Element Object (IMO Name—IManagedElement)
|
IP Address
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Communication State
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Investigation State
|
Product/IP-Core
|
|
Y
|
Y
|
Y
|
Element Category
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Element Type and Key
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Device Name
|
Product/IP-Core
|
|
Y
|
Y
|
Y
|
System Name
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
System Description
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Up Time
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Software Version
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Vendor Identity
|
Product/IP-Core
|
|
Y
|
Y
|
Y
|
Memory and CPU Usage
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Agent Memory
|
Product/IP-Core
|
|
Y
|
Y
|
Y
|
Number of Device Components
|
|
|
|
|
|
Number of Logical Entries
|
|
|
|
|
|
Layer 1
Table 48 summarizes Layer 1 attribute support on Cisco switches in Cisco ANA 3.6.
Table 48 Layer 1 Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
Physical Layer Object (IMO Name—IPhysicalLayer)
|
Media Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Clocking Source
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Maximum Speed
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Is Internal Port
|
Product/IP-Core
|
|
Y
|
Y
|
Y
|
Maximum and Minimum Discarded Thresholds
|
Product/IP-Core
|
|
Y
|
Y
|
Y
|
Discarded Bandwidth
|
|
|
|
|
|
Maximum and Minimum Dropped Thresholds
|
Product/IP-Core
|
|
|
Y
|
Y
|
Dropped Bandwidth
|
|
|
|
|
|
Maximum and Minimum Input Threshold
|
Product/IP-Core
|
|
|
Y
|
Y
|
Input Bandwidth
|
|
|
|
|
|
Maximum and Minimum Output Thresholds
|
Product/IP-Core
|
|
Y
|
Y
|
Y
|
Output Bandwidth
|
|
|
|
|
|
Discarded and Received Input Data Counters
|
Product/IP-Core
|
Topology Layer 1 Counters
|
Y
|
Y
|
Y
|
Dropped and Forward Output Data Counters
|
Product/IP-Core
|
Topology Layer 1 Counters
|
Y
|
Y
|
Y
|
Administrative Status
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Operational Status
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Last Changed
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
IANA Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
IP
Table 49 summarizes IP attribute support on Cisco switches in Cisco ANA 3.6.
Table 49 IP Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
IP Interface Object (IMO Name—IIPInterface)
|
IP Address
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Subnetwork Mask
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
IP Interface Addresses
|
Product/IP-Core
|
Configuration
|
|
Y
|
Y
|
Interface Name
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Interface Description
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
IP Interface State
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
OSPF Interface Cost
|
|
|
|
Y
|
|
Broadcast Address
|
|
|
|
Y
|
|
MTU
|
|
|
|
Y
|
|
Lookup Method
|
|
|
|
|
|
Address Resolution Type
|
|
|
|
|
|
ARP Timeout
|
|
|
|
|
|
Secured ARP
|
|
|
|
|
|
ICMP Mask Reply
|
|
|
|
|
|
IGMP Proxy
|
|
|
|
|
|
HSRP Groups
|
Product/IP-Core
|
|
|
Y
|
|
IP Multiplexing Table
|
|
|
|
|
|
IANA Type
|
|
|
|
|
|
Routing Entry Object (IMO Name—IRoutingEntry)
|
Destination IP Subnet
|
Product
|
Configuration
|
Y
|
Y
|
Y
|
Next Hop IP Address
|
Product
|
Configuration
|
Y
|
Y
|
Y
|
Type
|
Product
|
Configuration
|
Y
|
Y
|
Y
|
Routing Protocol Type
|
Product
|
Configuration
|
Y
|
Y
|
Y
|
Outgoing Interface Name
|
Product
|
Configuration
|
Y
|
Y
|
Y
|
ARP Entry Object (IMO Name—IARPEntry)
|
IP Address
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
MAC Address
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Port
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Entry Type
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
HSRP Group Entry Object (IMO Name—HSRPGroupEntry)
|
Group Number
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Port Description
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Priority
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Coupled Router
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
State
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Tracking Interfaces
|
|
|
|
|
|
Virtual IP Address
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Virtual MAC Address
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Routing Protocols
Table 50 summarizes routing protocol attribute support on Cisco switches in Cisco ANA 3.6.
Table 50 Routing Protocol Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
BGP Neighbor Entry Object (IMO Name—IBgpNeighborEntry)
|
Remote Identifier
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Neighbor Type
|
|
|
|
|
|
Distributing Interfaces
|
|
|
|
|
|
Remote Address
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Remote Autonomous System
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Status
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Hold Time
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Keep Alive Time
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
OSPF Entry Object (IMO Name—IOspfEntry)
|
Area Identifier
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
IP Address
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Type
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Administrative Status
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Operational Status
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Ethernet (Physical)
Table 51 summarizes support for physical Ethernet attributes on Cisco switches in Cisco ANA 3.6.
Table 51 Ethernet Physical Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
Ethernet Channel Object (IMO Name—IEthernetChannel)
|
Channel Group
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Channel Bandwidth
|
Product/IP-Core
|
Configuration
|
|
|
Y
|
IANA Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Ethernet Interface Object (IMO Name—IEthernet)
|
MAC Address
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Duplex Mode
|
|
|
|
|
|
Output Flow Control
|
|
|
|
|
|
Input Flow Control
|
|
|
|
|
|
IANA Type
|
Product/IP-Core
|
Configuration
|
|
|
|
Physical Equipment
Table 52 summarizes physical equipment support on Cisco switches in Cisco ANA 3.6.
Table 52 Physical Equipment Support on Cisco Switches
Attribute
|
|
|
|
|
|
Module/Board Object (IMO Name—Imodule)
|
Module Name
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Module Description
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Software Version
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Operational Status
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Hardware Type & Version
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Managed IP Address
|
|
|
|
|
|
Redundant Equipment
|
|
|
|
|
|
Configured Redundancy
|
|
|
|
|
|
Redundancy Status
|
|
|
Y
|
Y
|
|
Operational Status Last Changed
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
|
Supported Physical Termination Points
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
|
Serial Number (soft property)
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Chassis Object (IMO Name—Ichassis)
|
Equipment Holder Type
|
Product/IP-Core
|
|
Y
|
Y
|
|
Description
|
|
|
Y
|
|
Y
|
Serial Number
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Ethernet (Logical)
Table 53 summarizes support for logical Ethernet attributes on Cisco switches in Cisco ANA 3.6.
Table 53 Ethernet Logical Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
VLAN Encapsulation Object (IMO Name—IIEEE802)
|
VLAN Identification
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Binding Information
|
|
|
|
|
|
Binding Status
|
|
|
|
|
|
IANA Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Bridging Entry Object (IMO Name—IBridgeEntry)
|
Destination MAC Address
|
|
|
Y
|
Y
|
Y
|
Outgoing Interface
|
|
|
Y
|
Y
|
Y
|
ATM
Table 54 summarizes support for Asynchronous Transfer Mode (ATM) attributes on Cisco switches in Cisco ANA 3.6.
Table 54 ATM Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
ATM Interface Object (IMO Name—IAtm)
|
ATM Address
|
|
|
|
|
|
Interface Type
|
|
|
|
|
|
VP and VC Ranges
|
|
Status
|
|
|
|
VC Table
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Cross-Connect Table
|
|
|
|
|
|
IANA Type
|
Product/IP-Core
|
|
|
Y
|
|
ATM VC Object (IMO Name—IAtmVc)
|
Virtual Channel Identifier
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Virtual Path Identifier
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Shaping Profile
|
|
|
|
|
|
Discarded and Received Input Data Counters
|
Product/IP-Core
|
Topology Layer 2 Counters
|
|
Y
|
|
Dropped and Forward Output Data Counters
|
Product/IP-Core
|
Topology Layer 2 Counters
|
|
Y
|
|
Ingress Traffic Descriptor
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Egress Traffic Descriptor
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Administrative Status
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Operational Status
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
IANA Type
|
|
|
|
|
|
Virtual Connection Encapsulation Object (IMO Name—IVcBasedEncapsulation)
|
Virtual Connection Interface
|
|
|
|
|
|
Binding Information
|
|
|
|
|
|
Binding Status
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
IANA Type
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
ATM Traffic Descriptor Object (IMO Name—IAtmTrafficDescriptor)
|
Traffic Descriptor Type
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Service Category
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Cell Loss Priority
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Cell Delay Variation
|
|
|
|
|
|
Cell Delay Variation Tolerance
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Maximum High Priority and Aggregate Burst Rates
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Minimum High Priority and Aggregate Cell Rates
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Sustainable High Priority and Aggregate Cell Rates
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Peak High Priority and Aggregate Cell Rates
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Name
|
|
|
|
|
|
Index
|
|
|
|
|
|
ATM Access Traffic Descriptor Object (IMO Name—IAtmAccessTrafficDescriptor)
|
Scope
|
|
|
|
|
|
Maximum Active VPCs and VCCs
|
|
|
|
|
|
Maximum Supported VPI and VCI Bits
|
|
|
|
|
|
Generic Flow Control Mode
|
|
|
|
|
|
Police Mode
|
|
|
|
|
|
Name
|
|
|
|
|
|
Index
|
|
|
|
|
|
ATM Logical Interface Object (IMO Name—IAtmLogicalPort/Trunk)
|
Same as ATM interface
|
Product/IP-Core
|
Status
|
|
|
|
HDLC
Table 55 summarizes support for High-Level Data Link Control (HDLC) attributes on Cisco switches in Cisco ANA 3.6.
Table 55 HDLC Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
High Level Data Link Control Encapsulation Object (IMO Name—IEncapsulation)
|
Virtual Connection Interface
|
Product/IP-Core
|
|
|
Y
|
Y
|
Binding Information
|
|
|
|
|
|
Binding Status
|
Product/IP-Core
|
|
|
Y
|
Y
|
IANA Type
|
Product/IP-Core
|
|
|
Y
|
Y
|
MPLS
Table 56 summarizes support for Multiprotocol Label Switching (MPLS) attributes on Cisco switches in Cisco ANA 3.6.
Table 56 MPLS Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
MPLS Interface Object (IMO Name—IMpls)
|
Distribution Protocol
|
IP-Core
|
|
|
Y
|
|
Outer and Inner Labels
|
|
|
|
|
|
Traffic Engineering Properties
|
IP-Core
|
Configuration
|
|
Y
|
|
Resource Reservation Properties
|
|
|
|
|
|
IANA Type
|
Auto
|
|
|
Y
|
|
MPLS TE Tunnel Interface Object (IMO Name—IMplsTETunnel)
|
Destination Address
|
IP-Core
|
Configuration
|
|
Y
|
|
Outgoing Interface and Label
|
IP-Core
|
Configuration
|
|
Y
|
|
Path Identification
|
IP-Core
|
Configuration
|
|
Y
|
|
Requested Bandwidth
|
IP-Core
|
Configuration
|
|
Y
|
|
Measured Average Burst and Peak Bandwidth
|
IP-Core
|
Configuration
|
|
Y
|
|
Setup and Hold Priority
|
IP-Core
|
Configuration
|
|
Y
|
|
Affinity Bits and Mask
|
IP-Core
|
Configuration
|
|
Y
|
|
Automatic Route Announcement Status
|
IP-Core
|
Configuration
|
|
Y
|
|
Optimization Lock Down Status
|
IP-Core
|
Configuration
|
|
Y
|
|
Path Option
|
IP-Core
|
Configuration
|
|
Y
|
|
Name
|
IP-Core
|
Configuration
|
|
Y
|
|
Description
|
IP-Core
|
Configuration
|
|
Y
|
|
Administrative Status
|
IP-Core
|
Configuration
|
|
Y
|
|
Operational Status
|
IP-Core
|
Configuration
|
|
Y
|
|
IANA Type
|
Auto
|
|
|
Y
|
|
Point-to-Point Layer 2 MPLS Tunnel Interface Object (IMO Name—IPTPLayer2MplsTunnel)
|
Local and Remote Router Addresses
|
IP-Core
|
Configuration
|
|
Y
|
|
Local and Remote Virtual Connection Labels
|
IP-Core
|
Configuration
|
|
Y
|
|
Tunnel Identification
|
IP-Core
|
Configuration
|
|
Y
|
|
Tunnel Status
|
IP-Core
|
Configuration
|
|
Y
|
|
Local and Remote Tunnel Interface
|
|
|
|
|
|
IANA Type
|
Auto
|
|
|
Y
|
|
MPLS TE Object (IMO Name—IMplsTEProperties)
|
Administrative Weight
|
IP-Core
|
Configuration
|
|
Y
|
|
Attributes Identifier
|
|
|
|
|
|
Signaling Protocol
|
IP-Core
|
Configuration
|
|
Y
|
|
Available Physical and Reservable Bandwidth
|
IP-Core
|
Configuration
|
|
Y
|
|
Reserved Bandwidth
|
IP-Core
|
Configuration
|
|
Y
|
|
MPLS TE Allocation Entry Object (IMO Name—IMplsTEPropertiesAllocationEntry)
|
Priority Level
|
|
|
|
|
|
Allocated and Cumulative Bandwidth
|
|
|
|
|
|
RSVP Properties Object (IMO Name—IRsvpProperties)
|
Allocated Bandwidth
|
|
|
|
|
|
Maximum Per Flow and Total Allowed Bandwidth
|
|
|
|
|
|
LSE Entry Object (IMO Name—ILSEEntry)
|
Incoming Label
|
IP-Core
|
Configuration
|
|
Y
|
|
Outgoing Interface and Label
|
IP-Core
|
Configuration
|
|
Y
|
|
Switching Action
|
IP-Core
|
Configuration
|
|
Y
|
|
Next Hop IP Address
|
IP-Core
|
Configuration
|
|
Y
|
|
MPLS Aggregate Entry Object (IMO Name—IMplsAggregateEntry)
|
Virtual Routing Entity
|
IP-Core
|
Configuration
|
|
Y
|
|
Incoming Label
|
IP-Core
|
Configuration
|
|
Y
|
|
Outgoing Interface and Label
|
IP-Core
|
Configuration
|
|
Y
|
|
Switching Action
|
IP-Core
|
Configuration
|
|
Y
|
|
Next Hop IP Address
|
IP-Core
|
Configuration
|
|
Y
|
|
MPLS TE Tunnel Segment Object (IMO Name—IMplsTESegment)
|
Segment Type
|
IP-Core
|
Configuration
|
|
Y
|
|
Measured Average Burst and Peak Bandwidth
|
IP-Core
|
Configuration
|
|
Y
|
|
Path Identification
|
IP-Core
|
Configuration
|
|
Y
|
|
Name
|
IP-Core
|
Configuration
|
|
Y
|
|
VPN
Table 57 summarizes support for virtual private network (VPN) attributes on Cisco switches in Cisco ANA 3.6.
Table 57 VPN Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
VRF Entity Object (IMO Name—IVrf)
|
Name
|
IP-Core
|
Configuration
|
|
Y
|
|
Route Distinguisher
|
IP-Core
|
Configuration
|
|
Y
|
|
Virtual Routing Entry Object (IMO Name—IVrfEntry)
|
Next Hop BGP Address
|
IP-Core
|
Configuration
|
|
Y
|
|
Incoming and Outgoing Inner Label
|
IP-Core
|
Configuration
|
|
Y
|
|
Outer Label
|
IP-Core
|
Configuration
|
|
Y
|
|
Destination IP Subnet
|
IP-Core
|
Configuration
|
|
Y
|
|
Next Hop IP Address
|
IP-Core
|
Configuration
|
|
Y
|
|
Type
|
IP-Core
|
Configuration
|
|
Y
|
|
Routing Protocol Type
|
IP-Core
|
Configuration
|
|
Y
|
|
Outgoing Interface Name
|
IP-Core
|
Configuration
|
|
Y
|
|
Multi-Protocol BGP Entity Object (IMO Name—IMpBgp)
|
BGP Identifier
|
IP-Core
|
Configuration
|
|
Y
|
|
Local Autonomous System
|
IP-Core
|
Configuration
|
|
Y
|
|
Cross Virtual Routing Object (IMO Name—ICrossVrfRoutingEntry)
|
Outgoing Virtual Routing Entity Identifier
|
|
|
|
|
|
Incoming and Outgoing Virtual Routing Tags
|
|
|
|
|
|
Destination IP Subnet
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Next Hop IP Address
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Type
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Routing Protocol Type
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Outgoing Interface Name
|
|
|
|
|
|
QoS
Table 58 summarizes support for quality of service (QoS) attributes on Cisco switches in Cisco ANA 3.6.
Table 58 QoS Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
Access List Entry Object (IMO Name—IAccessListEntry)
|
Entry Identification
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Action Logic
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Source and Destination Address
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Source and Destination Wildcard
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Protocol Type
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Source and Destination Port Ranges
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Source and Destination Port Action
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Protocol Specific Info
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Differential Services Code Points
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Type of Service
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Precedence
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Matches
|
Product/IP-Core
|
Configuration
|
|
Y
|
|
Q-in-Q (Switch Port)
Table 59 summarizes support for Q-in-Q (also known as stacked VLAN) switch port attributes on Cisco switches in Cisco ANA 3.6.
Table 59 Q-in-Q Switch Port Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
VLAN Interface Object (IMO Name—IVlanInterface)
|
Mode
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Native Identification
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Customer Edge Identification
|
|
|
|
|
|
Service Provider Identification
|
|
|
|
|
|
VLAN Table
|
|
|
|
|
|
IANA Type
|
Product/IP-Core
|
Configuration
|
|
|
Y
|
VLAN Entry Object (IMO Name—IVlanEntry)
|
Identification
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Encapsulation Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Q-in-Q (Routed Switch)
Table 60 summarizes support for Q-in-Q (also known as stacked VLAN) routed switch attributes on Cisco switches in Cisco ANA 3.6.
Table 60 Q-in-Q Routed Switch Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
VLAN Multiplexer Object (IMO Name—IVlanEncapMux)
|
IANA Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
VLAN Encapsulation Object (IMO Name—IEEE802)
|
VLAN Identification
|
|
|
|
|
|
Binding Information
|
|
|
|
|
|
Binding Status
|
|
|
|
|
|
IANA Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
STP
Table 61 summarizes support for Spanning Tree Protocol (STP) attributes on Cisco switches in Cisco ANA 3.6.
Table 61 STP Attribute Support on Cisco Switches
Attribute
|
|
|
|
|
|
STP Service Object (IMO Name—IStpService)
|
Protocol Type
|
|
|
|
|
Y
|
Current and Bridge
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Current and Bridge Hello Time
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Current and Bridge Forward Delay
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Bridge Information Table
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
MST Service Object (IMO Name—IMstService)
|
Protocol Properties
|
|
|
Y
|
|
Y
|
Same as IStpService
|
|
|
Y
|
|
Y
|
MST Properties Object (IMO Name—ImstProperties)
|
Force Version
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Configuration Format, Region Name and Revision Level
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
External Root Cost
|
|
|
|
|
|
Maximum Instances
|
|
|
|
|
|
STP Instance Information Object (IMO Name—IStpInstanceInfo)
|
Object Identification
|
|
|
|
|
|
Identification
|
|
|
|
|
|
Priority
|
|
|
|
|
|
Designated Parent and Root Bridges
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Root Cost
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Is Root
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Root Port Identification
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Port Information Table
|
|
|
Y
|
|
Y
|
MST Protocol Instance Information Object (IMO Name—IMstInstanceInfo)
|
Instance Identification
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
same as IStpBridgeInfo
|
|
|
Y
|
Y
|
Y
|
Per VLAN Spanning Tree Protocol Instance Information Object (IMO Name—IPvstpInstanceInfo)
|
Protocol Type
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
Current and Bridge Maximum Age
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Current and Bridge Hello Time
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
Current and Bridge Forward Delay
|
Product/IP-Core
|
Status
|
Y
|
Y
|
Y
|
same as IStpInstanceInfo
|
|
|
Y
|
Y
|
Y
|
RSTP Instance Information Object (IRstpInstanceInfo)
|
Force Version
|
Product/IP-Core
|
Configuration
|
Y
|
Y
|
Y
|
same as IStpInstanceInfo
|
|
|
Y
|
Y
|
|
