Table A-1 Service Alarms
Item
|
Name
|
Description
|
is-correlation-allowed
|
correlate
|
is-ticketable
|
severity
|
weight
|
1
|
Primary HSRP interface is not active
Primary HSRP interface is active
|
Sent when an active HSRP group member is not active anymore, a link was shut down.
|
true
|
true
|
true
|
MAJOR
|
-2
|
2
|
Secondary HSRP interface is active
Secondary HSRP interface is not active
|
Secondary member of an HSRP group is active.
|
true
|
true
|
true
|
MAJOR
|
-2
|
3
|
All ip interfaces down
Active ip interfaces found
|
Sent when all IP interfaces configured above a physical port change operating status to down.
|
true
|
true
|
true
|
MAJOR
|
4000
|
4
|
Interface status down/up
|
Sent when an IP interface changes operating status to down.
|
true
|
true
|
true
|
MAJOR
|
3000
|
5
|
Card in/out
|
Card in, card out.
|
true
|
true
|
true
|
MAJOR
|
maximum
|
6
|
Link down/up
|
Link down, link up.
|
true
|
true
|
true
|
CRITICAL
|
maximum
|
7
|
Device Unreachable
|
The device is no longer reachable.
|
true
|
true
|
true
|
MAJOR
|
3000
|
8
|
CPU Over Utilized
|
The device CPU percentage has passed the configured threshold.
|
true
|
true
|
true
|
MAJOR
|
1000
|
9
|
Memory Over Utilized
|
The device memory utilization has passed the configured threshold.
|
true
|
true
|
true
|
MAJOR
|
1000
|
10
|
Device Unsupported
|
The device is not supported in Cisco ANA.
|
false
|
true
|
true
|
CRITICAL
|
-2
|
11
|
Discard Packets
|
The port discard packets value has passed the configured settings.
|
true
|
true
|
true
|
MINOR
|
4000
|
12
|
Dropped Packets
|
The port dropped packets value has passed the configured settings.
|
true
|
true
|
true
|
MINOR
|
4000
|
13
|
Module Unsupported
|
The module is not supported in Cisco ANA.
|
false
|
true
|
true
|
CRITICAL
|
-2
|
14
|
Port Flapping
|
Port changing state frequently.
|
false
|
true
|
true
|
CRITICAL
|
5000
|
15
|
Port Down
|
Port down.
|
true
|
true
|
true
|
MAJOR
|
5000
|
16
|
Rx Over Utilized
|
The percentage of the traffic on the port passed the configured threshold.
|
true
|
true
|
true
|
MINOR
|
2000
|
17
|
Tx Over Utilized
|
The percentage of the traffic on the port passed the configured threshold.
|
true
|
true
|
true
|
MINOR
|
2000
|
18
|
VPN Leak
|
Upon detection of a link between VPNs, the system issues a VPN leak alarm to alert the user of possible security breach. This is disabled by default.
|
false
|
true
|
true
|
INFO
|
-2
|
19
|
Cloud Problem
|
A problem in an unmanned segment.
|
true
|
false
|
true
|
MAJOR
|
2000
|
20
|
Concurrent Backup and Primary Port
|
Backup & primary ports are up.
|
false
|
false
|
true
|
MAJOR
|
-2
|
21
|
Backup Interface Warning
|
Warning ticket for backup interface being up after a predefined period of time.
|
false
|
true
|
true
|
INFO
|
-2
|
22
|
Broken LSP discovered
|
-
|
true
|
true
|
true
|
MAJOR
|
100
|
23
|
MPLS Black hole
|
-
|
true
|
true
|
true
|
WARNING
|
100
|
24
|
Layer 2 Tunnel Down
|
When a martini tunnel goes down.
|
true
|
true
|
true
|
MINOR
|
100
|
25
|
MPLS TE Tunnel Down/Flapping
|
When a traffic engineering tunnel goes down.
|
true
|
true
|
true
|
MAJOR
|
500
|
26
|
BGP Neighbor Down
|
When a BGP neighbor (both BGP routers are managed) is changing state from established.
|
true
|
true
|
true
|
CRITICAL
|
-2
|
27
|
Card Up/Down
|
Indicates that the card admin status is changed from down to up, and from up to down
|
true
|
false
|
true
|
MAJOR
|
500
|
If the source of the alarm is an interface with technology which is not supported by Cisco ANA, then the alarm will not be generated.
