This appendix provides the list of service alarms that are supported by Cisco ANA 3.5.1.
Note If the source of the alarm is an interface with technology, which is not supported by Cisco ANA, then the alarm will not be generated.
Note If the source of the alarm is an entity, which is not modeled by Cisco ANA, (for example, an unsupported module), then the alarm will not be generated.
The columns that are displayed in the tables that follow, relate to the configuration parameters described in this guide. For more information about these parameters see Event (Sub-Type) Configuration Parameters.
The following table lists the supported service alarms:
Table A-1 Service Alarms
Item
Name
Description
is-correlation -allowed
correlate
is-ticketable
severity
weight
1.
Primary HSRP interface is not active/Primary HSRP interface is active
Sent when an active HSRP group member is not active anymore (a link was shut down)
true
true
true
MAJOR
-2
2.
Secondary HSRP interface is active/Secondary HSRP interface is not active
Secondary member of an HSRP group is active
true
true
true
MAJOR
-2
3.
All ip interfaces down/Active ip interfaces found
Sent when all ip interfaces configured above a physical port change oper status to "down"
true
true
true
MAJOR
4000
4.
Interface status down/up
Sent when an ip interface changes oper status to "down"
true
true
true
MAJOR
3000
5.
Card in / out
Card in / out
true
true
true
MAJOR
maximum
6.
Link down / up
Link down / up
true
true
true
CRITICAL
maximum
7.
Device Unreachable
The device is no longer reachable.
true
true
true
MAJOR
3000
8.
CPU Over Utilized
The device CPU percentage has passed the configured threshold.
true
true
true
MAJOR
1000
9.
Memory Over Utilized
The device memory utilization has passed the configured threshold
true
true
true
MAJOR
1000
10.
Device Unsupported
The device is not supported in ANA.
false
true
true
CRITICAL
-2
11.
Discard Packets
The port discard packets value has passed the configured settings.
true
true
true
MINOR
4000
12.
Dropped Packets
The port dropped packets value has passed the configured settings.
true
true
true
MINOR
4000
13.
Module Unsupported
The module is not supported in ANA.
false
true
true
CRITICAL
-2
14.
Port Flapping
Port changing state frequently.
false
true
true
CRITICAL
5000
15.
Port Down
Port Down
true
true
true
MAJOR
5000
16.
Rx Over Utilized
The percentage of the traffic on the port passed the configured threshold.
true
true
true
MINOR
2000
17.
Tx Over Utilized
The percentage of the traffic on the port passed the configured threshold.
true
true
true
MINOR
2000
18.
VPN Leak
Upon detection of a link between VPNs the system issue a VPN Leak alarm to alert the user of possible security breach (Disabled by default)
false
true
true
INFO
-2
19.
Cloud Problem
A problem in an unmanned segment
true
false
true
MAJOR
2000
20.
Concurrent Backup & Primary Port
Backup & primary ports are up.
false
false
true
MAJOR
-2
21.
Backup Interface Warning
Warning ticket for backup interface being up after a predefined period of time
false
true
true
INFO
-2
22.
Broken LSP discovered
-
true
true
true
MAJOR
100
23.
MPLS Black hole
-
true
true
true
WARNING
100
24.
Layer 2 Tunnel Down
When a martini tunnel goes down
true
true
true
MINOR
100
25.
MPLS TE Tunnel Down/Flapping
When a Traffic engineering tunnel goes down
true
true
true
MAJOR
500
26.
BGP Neighbor Down
When a BGP neighbor (both BGP routers are managed) is changing state from established
If the source of the alarm is an interface with technology, which is not supported by Cisco ANA, then the alarm will not be generated.
