-
Cisco IOS XR System Error Message Reference Guide, Release 4.0
-
Preface
-
Overview
-
Access Control List (ACL) Messages
-
Application Infrastructure Messages
-
Diagnostic Messages
-
Fabric Messages
-
Forwarding Messages
-
High Availability (HA) Messages
-
Infrastructure Messages
-
Installation Messages
-
Internet Protocol (IP) Messages
-
Layer 1 Messages
-
Layer 2 Messages
-
Layer 3 Messages
-
License Messages
-
Media Messages
-
Manageability (MGBL) Messages
-
Operating System (OS) Messages
-
Packet Infrastructure Messages
-
Platform Messages
-
Policy Manager Messages
-
Quality of Service (QoS) Messages
-
Routing Messages
-
Security Messages
-
Services Messages
-
Simple Network Management Protocol (SNMP) Messages
-
Subscriber Messages
-
Feedback
Table Of Contents
Quality of Service (QoS) Messages
Quality of Service (QoS) Messages
This section contains all Quality of Service related System Error Messages.
AFMON_EA_TEST Messages
Error Message%QOS-AFMON_EA_TEST-3-ERROR AF-Mon Test EA error occurred at function [chars]:[unsigned int] - [chars]
Explanation The AFMon EA test process encountered the specified error
Recommended Action None
AFMON_MA Messages
Error Message%QOS-AFMON_MA-3-CAPS_REMOVE Afmon MA caps remove failed: caps: [unsigned int], ifhandle: [hex], error: [chars]
Explanation The AFMon MA process encountered the specified error while trying to remove the caps.
Recommended Action None
Error Message%QOS-AFMON_MA-7-INIT AFMon MA initialization failed in function [chars]: [chars]
Explanation The Afmon MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the Afmon MA process.
Recommended Action None
Error Message%QOS-AFMON_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy.
Explanation The Afmon MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the AFMON MA DB. This could be the result of an incorrect operation in the'verify' phase.
Recommended Action None
EFCM Messages
Error Message%QOS-EFCM-3-ERROR EFCM-Err: [chars]
Explanation This is an error message from the EFCM, it indicates that something has gone wrong internally in the EFCM.
Recommended Action File a DDTS
Error Message%QOS-EFCM-6-INFO EFCM-Info: [chars]
Explanation This is an informational message from the EFCM
Recommended Action *RECUR*
Error Message%QOS-EFCM-7-DEBUG EFCM-Debug: [chars]
Explanation This is a debugging message from the EFCM
Recommended Action *NONE*
QOS_EA_BW_CHG Messages
Error Message%QOS-QOS_EA_BW_CHG-6-BWCHG_LOG QOSEA: updated bandwidth for ifh [hex] with [dec] [chars] [chars]
Explanation This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface.
Recommended Action *NONE*
QOS_EA_IIR_ADD_FAIL Messages
Error Message%QOS-QOS_EA_IIR_ADD_FAIL-3-ERROR service-policy [chars] [chars] on interface [hex] member [hex] [chars], [chars]
Explanation The QoS policy could not be applied on the bundle interface member specified.
Recommended Action If there are errors in the policy, remove the qos policy, correct the errors and reattach. If there are no errors in the policy, collect the required information and contact your Cisco technical support representative.
QOS_EA_INIT Messages
Error Message%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]
Explanation The QoS EA process encountered the specified error.
Recommended Action Collect the outputs of 'show qos-ea trace all location location' and 'show process all location location, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.
Error Message%QOS-QOS_EA_INIT-3-ERROR QoS EA initialization [chars] failed: [chars]
Explanation The QoS EA process encountered the specified error
Recommended Action Collect the outputs of 'show qos-ea trace all location location' and 'show process all location location, copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.
QOS_EA_INPLACE Messages
Error Message%QOS-QOS_EA_INPLACE-3-ERROR QoS EA inplace modification failed for [chars]
Explanation The QoS EA process encountered the specified error.
Recommended Action Collect the outputs of 'show qos-pal trace all location location' and copy the error message exactly as it appears on the console or in the system log, and contact your Cisco technical support representative.
QOS_EA_MODIFY_FAIL Messages
Error Message%QOS-QOS_EA_MODIFY_FAIL-3-ERROR inconsistency detected due to ANCP or Bandwidth modification. Execute show qos inconsistency, to obtain information. [chars]
Explanation The QoS policy on the interface specified could not be modified successfully in response to an ANCP or interface speed change notification. This may happen because the QoS policy is now invalid with the new reference bandwidth.
Recommended Action Verify the bandwidth values. Remove the qos policy and reattach. Fix errors in the policy, if any.
QOS_EA_TEST Messages
Error Message%QOS-QOS_EA_TEST-3-ERROR QoS EA test error occurred at function [chars]: [chars]
Explanation The QoS EA test process encountered the specified error
Recommended Action None
QOS_EA_VERIFY Messages
Error Message%QOS-QOS_EA_VERIFY-6-ERROR QoS EA verify policy failed, error [chars]: [chars]
Explanation The QoS EA policy verification encountered the specified error. This may happen because the QoS policy is invalid and cannot be applied successfully.
Recommended Action Check the output of 'show config failed' and correct the qos policy appropriately.
Error Message%QOS-QOS_EA_VERIFY-6-ERROR QoS EA verify policy failed, error [chars]: [chars]
Explanation The QoS EA policy verification encountered the specified error. This may happen because the QoS policy is invalid and cannot be applied successfully.
Recommended Action Check the output of 'show config failed' and correct the qos policy appropriately.
QOS_FIFO Messages
Error Message%QOS-QOS_FIFO-7-DEBUG_INIT_ERROR An error occurred during debug initialization. Error: [chars]
Explanation The QoS FIFO dll encountered a problem while initializing the debug facility. This is not a fatal error. QoS FIFO will continue to execute properly, but will not be able to use the debugging facility.
Recommended Action None
QOS_LIB_PLMGR_SUPP Messages
Error Message%QOS-QOS_LIB_PLMGR_SUPP-3-ERR_LTRACEOPEN Error opening ltrace file '[chars]' : QoS lib ltraces will not work
Explanation Qos lib had trouble opening ltrace file.
Recommended Action '*SUPPORT*'
QOS_MA Messages
Error Message%QOS-QOS_MA-3-CAPS_INFO_ADD QoS MA caps add failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], service_policy: [chars], error: [chars]
Explanation The QoS MA process encountered the specified error while trying to add the caps.
Recommended Action None
Error Message%QOS-QOS_MA-3-CAPS_REMOVE QoS MA caps remove failed: caps: [unsigned int], proto: [unsigned int], ifhandle: [hex], error: [chars]
Explanation The QoS MA process encountered the specified error while trying to remove the caps.
Recommended Action None
Error Message%QOS-QOS_MA-3-DPC_REM QoS MA DPC (delete) failed: ifhandle: [hex], caps: [unsigned int], error: [chars]
Explanation The QoS MA process encountered the specified error while trying to send a critical operation to the EA.
Recommended Action None
Error Message%QOS-QOS_MA-3-IFH_BW_UPDATE_RATE QoS MA bandwidth update failed: ifhandle: [hex], bandwidth: [unsigned int], error: [chars]
Explanation The QoS MA process encountered the specified error while trying to update it's database with the new bandwidth update from ANCP or Ifmgr.
Recommended Action None
Error Message%QOS-QOS_MA-3-INVALID_BW_ENTRY Invalid bandwidth entry in QoS-MA bandwidth table: ifhandle: [hex], bandwidth: [unsigned int]
Explanation The QoS MA process encountered an invalid entry while receiving updates from ANCP or Ifmgr.
Recommended Action None
Error Message%QOS-QOS_MA-3-OP_FAIL [chars] Error [hex]:[chars]
Explanation A critical operation attempted by QoS MA has failed. It may affect the proper functioning of QoS features.
Recommended Action None.
Error Message%QOS-QOS_MA-7-FABQOS_SEND_FAILED The switch-fabric service policy '[chars]' was not accepted correctly by the EA. Error: [chars]
Explanation The QoS MA process encountered the specified error upon startup or restart. The EA did not process the FABQOS policy correctly.
Recommended Action None
Error Message%QOS-QOS_MA-7-INIT QoS MA initialisation failed in function [chars]: [chars]
Explanation The QoS MA process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the QoS MA process.
Recommended Action None
Error Message%QOS-QOS_MA-7-INVALID_CAPS_STATUS The service policy '[chars]' on '[chars]', '[chars]' is in inconsistent state. Please remove and reconfigure the service policy.
Explanation The QoS MA process encountered the specified error in the 'apply' phase. The incorrect caps type is present in the QOS MA DB. This could be the result of an incorrect operation in the'verify' phase.
Recommended Action None
Error Message%QOS-QOS_MA-7-INVALID_ERROR_ARRAY_STATUS The dpc error array '[hex]' and caps error array '[hex]' have invalid codes at the same index '[dec]'.
Explanation An internal error was encountered while processing QoS configuration.
Recommended Action None
QOS_TXM Messages
Error Message%QOS-QOS_TXM-7-DEBUG_INIT_ERROR A error occurred during debug initialization, err: [chars]
Explanation The QOS TXM process encountered an error while initializing the debug facility. This is not a fatal error. QOS TXM will continue to execute properly, but will not be able to use the debugging facility.
Recommended Action None
Error Message%QOS-QOS_TXM-7-UNINITIALISE_ERROR An error occurred in initialization sequence for iface: [chars]
Explanation The QOS TXM process encountered an error in its initialization sequence. This is a serious error. QOS TXM functioning correctly is not guaranteed depending upon the exact problem in initialisation sequence
Recommended Action None
QOS Messages
Error Message%QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars]
Explanation The router cannot allocate more memory.
Recommended Action It may be necessary to free some memory by exiting a program.
Error Message%QOS-QOS-3-CLEAR_REDQ_ENTRY_FAIL Error encountered while clearing redq entry for an interface default queue associated with an interface in [chars] PSE. Error: [chars]
Explanation QMgr encountered an error while programming redq entry for an interface default queue in the associated PSE
Recommended Action REDQ drop threshold could not be reset to 0.
Error Message%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]
Explanation Connection to some server failed.
Recommended Action Connection to a server failed. This message is generated from LC. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]
Explanation Connection to IM server failed during QoS EA process init. This would lead to an inability of QoS EA to process CAPS from QoS MA and to a potential disconnect between the hardware/software views of the configured qos policies on the system.
Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*
Error Message%QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services
Explanation Error occurred while waiting for an event.
Recommended Action Error occurred while waiting for an event. This message is displayed from LC software. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOS-3-EA_IIR_ATTACH_FAILURE Error encountered during QoS programming for bundle member [chars] (ifh: [hex]) of bundle CH[hex], direction: [chars], error: [chars]
Explanation A member was added to the bundle or it was added earlier and link came up now. This triggers update event and an error is encountered in QoS EA process while handling update event for the bundle member.
Recommended Action If its scaled config exhausting h/w resources, try reducing number of targets for QoS policies.
Error Message%QOS-QOS-3-EA_IM_CAPS_RESYNC_FAILURE Error encountered during caps resync with IM for interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]
Explanation QoS EA encountered an error during resync of QoS capsulation with IM.
Recommended Action Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.
Error Message%QOS-QOS-3-EA_ROLLBACK_FAILURE_DURING_MODIFY Error encountered during rollback of policy modification on interface: [chars] (ifh: [hex]), direction: [chars], error: [chars]
Explanation QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.
Recommended Action Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface.
Error Message%QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager
Explanation Failed to create event manager.
Recommended Action Failure encountered while creating event manager. This message is generated from LC software. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOS-3-INTF_CREATE_FAIL Error encountered during the allocation of queueing resources for interface, ifh: [hex] in [chars] queueing asic. Error: [chars]
Explanation QMgr encountered an error during the allocation of queueing resources within a queuing asic as part of interface create.
Recommended Action Interface create failed.
Error Message%QOS-QOS-3-INTF_DELETE_FAIL Error encountered during the de-allocation of queueing resources for interface, ifh: [hex] in the [chars] queueing asic. Error: [chars]
Explanation QMgr encountered an error during the de-allocation of queueing resources within a queuing asic as part of interface delete.
Recommended Action Interface delete failed.
Error Message%QOS-QOS-3-INTF_MODIFY_FAIL Error encountered during the re-programming of queueing resources for interface, ifh: [hex] in the [chars] queueing asic. Error: [chars]
Explanation QMgr encountered an error during the re-programming of queueing resources within a queuing asic as part of interface modify operation.
Recommended Action Interface modify failed.
Error Message%QOS-QOS-3-PROGRAM_REDQ_ENTRY_FAIL Error encountered while programming redq entry for interface default queues in [chars] PSE. Error: [chars]
Explanation QMgr encountered an error while programming redq entry for interface default queues in the associated PSE
Recommended Action REDQ drop threshold could be 0.
Error Message%QOS-QOS-3-REDQ_UPDATE_HW_FAIL Error encountered during the update of REDQ entries to hw in [chars] PSE. Error: [chars]
Explanation QMgr encountered an error when flushing shadow REDQ entries to hardware.
Recommended Action This is a fatal condition. Hardware and software REDQ entries are out of sync. Might have to restart the LC
Error Message%QOS-QOS-3-UNKNWN_INTF_DEFAULT_QUEUE Unable to ascertain interface default queue in [chars] queueing asic for interface, ifh: [hex]. Error: [chars]
Explanation QMgr encountered an error in obtaining the interface default queue in a queuing asic for a given interface. This prevented QMgr from programming REDQ entry for the corresponding queue. Even though the interface is created, it will not be able to carry traffic
Recommended Action --
Error Message%QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event
Explanation Error occurred while waiting for an event.
Recommended Action Error occurred while waiting for an event. This message is displayed from LC software. Please collect logs of following commands. show logging show qos ea-trace location show qos-ma trace location show im trace location show processes qos_ea location 0/x/CPU0 show processes qos_ma location 0/x/CPU0 If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOS-4-ERR_EVM_EVENT_BLOCK Unrecoverable error in event loop. Error: [chars]
Explanation An error (other than EINTR) occurred in the event loop. The process has exited and restarted.
Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*
Error Message%QOS-QOS-6-EA_DEBUG_INIT_FAIL Failed to initialize debug infra within QoS EA. Error: [chars]
Explanation Debug initialization failed within EA. Debugs may not be printed
Recommended Action Try restarting QoS EA process
Error Message%QOS-QOS-6-EA_LTRACE_INIT_FAIL Failed to initialize ltrace infra within QoS EA. Error [chars]
Explanation Ltrace initialization failed within EA. Ltraces may not be printed
Recommended Action Try restarting QoS EA process
Error Message%QOS-QOS-6-EA_MIPC_NTFN_ACK_FAILURE Error encountered while trying to ACK to an MIPC event notification [unsigned int]. Error [chars]
Explanation QoS EA encountered an error while ACKing to an MIPC event
Recommended Action Try restarting QoS EA process
Error Message%QOS-QOS-6-EA_MIPC_NTFN_HNDLR_FAILURE Failed to process MIPC notification [unsigned int] within QoS EA. Error [chars]
Explanation QoS EA encountered an error while processing an MIPC event notification
Recommended Action Try restarting QoS EA and/or HFR Platform Manager process
Error Message%QOS-QOS-6-EA_SCOL_INIT_FAILURE Statsd registration failed(Error: [chars]). QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.
Explanation Statsd registration failed. QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.
Recommended Action Restart QoS EA process
Error Message%QOS-QOS-6-EA_SHM_INIT_FAILURE Shared memory initialization failed(Error: [chars]). QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.
Explanation QoS_EA failed to initialize stats shared memory (after retry count equals 5). QoS drops will not be reported for any qos enabled interfaces in the output of show interface CLI.
Recommended Action Take a look at the system memory and the processes which are running. Restart QoS_EA process when the memory usage goes down.
Error Message%QOS-QOS-6-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q to [dec]. Dropping packet. Error: [chars]
Explanation Could not set the outgoing queue associated with this packet. As a consequence the packet is being dropped. During normal operation of the system, an occasional (very in-frequent) packet drop in the slow-path is tolerable.
Recommended Action No action is required.
Error Message%QOS-QOS-6-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to initialize debug infra within the qfifo node on the netio chain. Error: [chars]
Explanation Debug initialization failed within the qfifo node on the NetIO chain. Debugs may not be printed.
Recommended Action Try restarting netio process
Error Message%QOS-QOS-7-ERR_EVM_CREATE Failed to setup event manager
Explanation Failed to setup event manager.
Recommended Action No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*
QOSEA Messages
Error Message%QOS-QOSEA-3-BM_ADD_REMOVE_ERROR QoSEA-Err: Bundle Member Add/Remove: [chars]
Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong in QoS EA while adding/removing a bundle member. Error can happen with/without QoS on bundle.
Recommended Action *RECUR*
Error Message%QOS-QOSEA-3-BWCHG_ERROR QOSEAERR: update bandwidth for ifh [hex] with [dec] [chars] [chars] [chars]
Explanation This is an error message from the QoS EA bandwidth change Process, it indicates that something has gone wrong internally in the QoS EA during bandwidth change. %x - Indicates ifh %d - New bandwidth %s - Direction %s - errormsg %s - errormsg
Recommended Action QoS EA encountered error during bandwidth change. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show multilink interfaces detail location x [For ML] show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSEA-3-ERROR QoSEA-Err: [chars]
Explanation This is an error message from the QoS EA Process, it indicates something has gone wrong internally in QoS EA. %s - Indicates the reason of failure.
Recommended Action QoS EA process has encountered an error. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSEA-3-EXIT_ERROR QoSEA-Err: [chars] [chars]
Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in QoS EA. %s - Both strings indicate the reason of failure.
Recommended Action QoS EA process has encountered an error. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show platform-mgr lc trace location x show im trace location x show iir trace location x show memory location x show memory summary location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSEA-3-IMATTR_ERROR QOSEAERR: im_attr_get bandwidth [chars] [hex] Error: [chars]
Explanation This is an error message from the QoS EA bandwidth change process, it indicates that something has gone wrong internally in the QoS EA during bandwidth attribute get. %s - Errormsg %x - ifh %s - Errormsg
Recommended Action QoS EA process encountered error during bandwidth attribute get. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show logging show multilink interfaces detail location x [For ML] If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSEA-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]
Explanation The QoS EA could not create the necessary message channel due to the given error
Recommended Action *DDTS*
Error Message%QOS-QOSEA-3-MSG_HANDLER_ERR An error occurred in the [chars] message handler
Explanation An error occurred during message handling in the indicated message handler
Recommended Action File a DDTS
Error Message%QOS-QOSEA-3-POLICY_ERROR QoSEA-Err: class:[chars], [chars]
Explanation This is an error message from the QoS EA Process, it indicates that something has gone wrong internally in QoS EA. %s - Both errormsg indicates the reason of failure
Recommended Action QoS EA process has encountered a policy error. This message is displayed from LC software. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSEA-3-ROLLBACK_ERROR QoSEA-Rollback-Err: [chars]
Explanation This is an error message from the QoS EA Process, it indicates that rollback failed in the QoS EA. %s - Errormsg
Recommended Action QoS EA process encountered error during rollback. Pls analyses the resource availability in the LC. Remove and add the qos policy-map for the interface. This message is displayed from LC. Please collect logs of following commands. show qos ea-trace location x show qos-lib trace client qos_ea critical location x show qos-lib trace client qos_ea intermittent location x show qosrm ltrace location x show gsr feat-mgr trace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSEA-3-UNHANDLED_MSG The QoS EA received an unhandled message
Explanation The QoS EA received a message that it was unable to handle'
Recommended Action *DDTS*
Error Message%QOS-QOSEA-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]
Explanation An incoming message was demuxed to the incorrect message handler
Recommended Action File a DDTS
Error Message%QOS-QOSEA-4-WARN QoSEA-Warn: [chars]
Explanation This is a warning message from the QoS EA Process
Recommended Action *RECUR*
Error Message%QOS-QOSEA-5-NOTICE QoSEA-Notice: [chars]
Explanation This is a notice message from the QoS EA Process
Recommended Action *NONE*
Error Message%QOS-QOSEA-6-BWCHG_LOG QOSEA: updated bandwidth for ifh [hex] with [dec] [chars] [chars]
Explanation This is an informational message from the QoS EA Process, it indicates that bandwidth change happened for an interface.
Recommended Action *NONE*
Error Message%QOS-QOSEA-6-INFO QoSEA-Info: [chars]
Explanation This is an informational message from the QoS EA Process
Recommended Action *RECUR*
Error Message%QOS-QOSEA-6-MSG_ASYNC An Asynchronous message was received
Explanation The QoS EA received an asynchronous message.
Recommended Action *NONE*
Error Message%QOS-QOSEA-6-POLICY_INFO QoSEA-Info: class:[chars], [chars]
Explanation This is an informational message from the QoS EA Process. It indicates that something can not be configure in service policy.
Recommended Action *NONE*
Error Message%QOS-QOSEA-7-DEBUG QoSEA-Debug: [chars]
Explanation This is a debugging message from the QoS EA Process
Recommended Action *NONE*
QOSLIB Messages
Error Message%QOS-QOSLIB-3-ERR_DLCLOSED Error CLosing DLL '[chars]' : '[chars]' one options in QoS commands may not work correctly
Explanation The Qos lib had trouble closing DLL.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%QOS-QOSLIB-3-ERR_DLOPEN Error opening DLL '[chars]' : '[chars]' one options in QoS commands may not work correctly
Explanation The Qos lib had trouble opening DLL.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
QOSRM_DLL Messages
Error Message%QOS-QOSRM_DLL-3-ERROR QoSRM-DLL-Err: [chars]
Explanation This is an error message from the QoS RM DLL, it indicates that something has gone wrong internally in the QoS RM dll.
Recommended Action This error means an issue happened in qos resource manager during hw programming. This message comes from LC code. Please collect logs from following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSRM_DLL-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]
Explanation The QoS RM dll could not create the necessary message channel due to the given error
Recommended Action *DDTS*
Error Message%QOS-QOSRM_DLL-3-MSG_HANDLER_ERR An error ([chars]) occurred in the [chars] message handler,Msg:[hex]
Explanation An error occurred during message handling in the indicated message handler
Recommended Action File a DDTS
Error Message%QOS-QOSRM_DLL-3-UNHANDLED_MSG The QoS RM dll received an unhandled message
Explanation The QoS RM dll received a message that it was unable to handle'
Recommended Action *DDTS*
Error Message%QOS-QOSRM_DLL-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]
Explanation An incoming message was demuxed to the incorrect message handler
Recommended Action File a DDTS
Error Message%QOS-QOSRM_DLL-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]
Explanation The QoS RM dll received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.
Recommended Action File a DDTS
Error Message%QOS-QOSRM_DLL-4-WARN QoSRM-DLL-Warn: [chars]
Explanation This is a warning message from the QoS RM DLL
Recommended Action *RECUR*
Error Message%QOS-QOSRM_DLL-6-INFO QoSRM-DLL-Info: [chars]
Explanation This is an informational message from the QoS RM DLL
Recommended Action *RECUR*
Error Message%QOS-QOSRM_DLL-6-MSG_ASYNC An Asynchronous message was received
Explanation The QoS RM dll received an asynchronous message.
Recommended Action *NONE*
Error Message%QOS-QOSRM_DLL-7-DEBUG QoSRM-DLL-Debug: [chars]
Explanation This is a debugging message from the QoS RM DLL
Recommended Action *NONE*
QOSRM Messages
Error Message%QOS-QOSRM-3-ERROR QoSRM-Err: [chars]
Explanation This is an error message from the QoS RM Process, it indicates that something has gone wrong internally in the QoS RM.
Recommended Action This error indicates qos resource manager has encountered an error condition. The message is generated from LC software. Please collect logs from following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSRM-3-MSG_CHAN Could not create Msg chan: [chars] error: [chars]
Explanation The QoS RM could not create the necessary message channel due to the given error
Recommended Action QoS RM could not create message channel. This message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qosrm ltrace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSRM-3-MSG_HANDLER_ERR Event: [chars] occurred in the [chars] message handler, Msg:[hex]
Explanation An error occurred during message handling in the indicated message handler
Recommended Action This error means QOS_RM encountered and error during message handling. The message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSRM-3-UNHANDLED_MSG The QoS RM received an unhandled message
Explanation The QoS RM received a message that it was unable to handle'
Recommended Action This error means qos_rm was unable to handle a message. The message is generated from LC software. Please collect logs of following command. show qos ea-trace location x show qosrm ltrace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSRM-3-UNKNOWN_MSG An unknown message was dispatched to the [chars] message handler: Msg: [hex]
Explanation An incoming message was demuxed to the incorrect message handler
Recommended Action This error means QoS RM encountered and error due to incorrect message handler. The message is generated from LC software. Please collect logs of following command. show qos ea-trace location x show qosrm ltrace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSRM-3-UNKNOWN_QTYPE Unknown Q-Type in message: [hex]
Explanation The QoS RM received a message, but was unable to determine which resource the message was intended for because the Q-Type field was incorrect.
Recommended Action This error means QoS RM found an incorrect Q-Type. Message is generated from LC software. Please collect logs of following commands. show qos ea-trace location x show qosrm ltrace location x show controllers pse uidb trace location x show platform-mgr lc trace location x show logging If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%QOS-QOSRM-4-WARN QoSRM-Warn: [chars]
Explanation This is a warning message from the QoS RM Process
Recommended Action *RECUR*
Error Message%QOS-QOSRM-6-INFO QoSRM-Info: [chars]
Explanation This is an informational message from the QoS RM Process
Recommended Action *RECUR*
Error Message%QOS-QOSRM-6-MSG_ASYNC An Asynchronous message was received
Explanation The QoS RM received an asynchronous message.
Recommended Action *NONE*
Error Message%QOS-QOSRM-7-DEBUG QoSRM-Debug: [chars]
Explanation This is a debugging message from the QoS RM Process
Recommended Action *NONE*