Cisco IOS XR System Error Message Reference Guide, Release 4.0.1 - Layer 3 Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Layer 3 Messages

IPHC_MA Messages

IPHC_PROFILE Messages

IPV6_ND_LITE Messages

Layer 3 Messages

This section contains all Layer 3 related System Error Messages.

IPHC_MA Messages
Error Message     
%L3-IPHC_MA-2-FAIL Failed to [chars] ([chars]) [chars]
Explanation During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_MA-3-DPC_ERROR [chars] [hex] [chars]
Explanation An error occurred during an operation.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_MA-3-ERROR [chars] [chars]
Explanation An error occurred during an operation.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_MA-3-MALLOC Memory allocation failed: [chars]
Explanation A call to malloc failed.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_MA-3-RECVFROM An error occurred receiving a packet: [chars]
Explanation The socket call recvfrom returned an error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_MA-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]
Explanation After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_MA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'
Explanation The process failed to allocate memory for the specified resource.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message     
%L3-IPHC_MA-4-ERR_THREAD_CREATE Failed to create '[chars]' thread: [chars]
Explanation IPHC MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*.
Error Message     
%L3-IPHC_MA-6-INFO [chars] [chars]
Explanation printing the iphc ma info.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_MA-6-SENDTO Packet send attempt timed out: [chars]
Explanation The socket call to send a control packet timed out.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPHC_PROFILE Messages
Error Message     
%L3-IPHC_PROFILE-2-FAIL IPHC PROFILE MANAGER failed to [chars]. [chars]
Explanation During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_PROFILE-3-ERROR [chars] [chars]
Explanation An error occurred during an operation.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_PROFILE-3-MALLOC Memory allocation failed: [chars]
Explanation A call to malloc failed.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_PROFILE-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars]
Explanation After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_PROFILE-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]'
Explanation The process failed to allocate memory for the specified resource.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message     
%L3-IPHC_PROFILE-6-INFO [chars] [chars] [dec]
Explanation printing the iphc profile info.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPHC_PROFILE-6-SENDTO Packet send attempt timed out: [chars]
Explanation The socket call to send a control packet timed out.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_ND_LITE Messages
Error Message     
%L3-IPV6_ND_LITE-3-ERR_ASYNC_SEND_FAIL Send async pulse to ipv6 nd lite process fails; Error [chars]
Explanation Attempt to send pulse to IPV6 ND lite process fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_CHAN_CONNECT_FAIL Cannot connect to ipv6 nd lite process; Error [chars]
Explanation Attempt to connect to ipv6 nd lite process channel fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SELF_GENERATE IPV6 ND Lite self generated fun: [chars]: line: [dec]
Explanation Attempt to munmap the shared memory fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_CACHED_DATA_FAIL Invalid cached shmem addr [hex]; fd [dec]
Explanation Attempt to get cached shared memory info fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_GIP_UNAVAILABLE IPV6 ND lite SHMEM can accommodate only [dec] global IP records (request for [dec] records [dec] )
Explanation IPV6 ND has requested transfer of more global IP records than shared memory can accommodate
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars]
Explanation Attempt to mmap the shared memory fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_MUNMAP_FAIL Cannot munmap file [chars]; Error [chars]
Explanation Attempt to munmap the shared memory fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars]
Explanation Attempt to open the shared memory fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars]
Explanation Attempt to truncate the shared memory file fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_UNAVAILABLE IPV6 ND lite SHMEM can accommodate only [dec] records (request for [dec] records [dec] )
Explanation IPV6 ND has requested transfer of more interface records than shared memory can accommodate
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%L3-IPV6_ND_LITE-3-ERR_SHMEM_UNLINK_FAIL Cannot unlink file [chars]; Error [chars]
Explanation Attempt to unlink the shared memory fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.

	Cisco IOS XR System Error Message Reference Guide, Release 4.0.1
	Layer 3 Messages
Cisco IOS XR System Error Message Reference Guide, Release 4.0.1 Preface Overview Access Control List (ACL) Messages Application Infrastructure Messages Diagnostic Messages Fabric Messages Forwarding Messages High Availability (HA) Messages Infrastructure Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Layer 3 Messages License Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Policy Manager Messages Quality of Service (QoS) Messages Routing Messages Security Messages Services Messages Simple Network Management Protocol (SNMP) Messages Subscriber Messages System Database Messages Index	Download this chapter Layer 3 Messages Download the complete book Full Book PDF: Cisco IOS XR System Error Message Reference Guide, Release 4.0.1 (PDF - 31 MB) Feedback Table Of Contents Layer 3 Messages IPHC_MA Messages IPHC_PROFILE Messages IPV6_ND_LITE Messages Layer 3 Messages This section contains all Layer 3 related System Error Messages. IPHC_MA Messages Error Message %L3-IPHC_MA-2-FAIL Failed to [chars] ([chars]) [chars] Explanation During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_MA-3-DPC_ERROR [chars] [hex] [chars] Explanation An error occurred during an operation. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_MA-3-ERROR [chars] [chars] Explanation An error occurred during an operation. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_MA-3-MALLOC Memory allocation failed: [chars] Explanation A call to malloc failed. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_MA-3-RECVFROM An error occurred receiving a packet: [chars] Explanation The socket call recvfrom returned an error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_MA-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars] Explanation After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_MA-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]' Explanation The process failed to allocate memory for the specified resource. Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error Message %L3-IPHC_MA-4-ERR_THREAD_CREATE Failed to create '[chars]' thread: [chars] Explanation IPHC MA encountered an unexpected error creating a new thread. The process will restart to attempt to recover. This is possibly due to a low memory condition but may also be an internal programming error. The error message should provide more information about the cause. Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. RECUR. Error Message %L3-IPHC_MA-6-INFO [chars] [chars] Explanation printing the iphc ma info. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_MA-6-SENDTO Packet send attempt timed out: [chars] Explanation The socket call to send a control packet timed out. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. IPHC_PROFILE Messages Error Message %L3-IPHC_PROFILE-2-FAIL IPHC PROFILE MANAGER failed to [chars]. [chars] Explanation During process start up an unrecoverable error occurred. The component will exit and should be restarted by the System Manager. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_PROFILE-3-ERROR [chars] [chars] Explanation An error occurred during an operation. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_PROFILE-3-MALLOC Memory allocation failed: [chars] Explanation A call to malloc failed. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_PROFILE-4-ERR_EVC_ERROR Error resetting '[chars]' connection: [chars] Explanation After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_PROFILE-4-ERR_MEM_ALLOC Failed to allocate [unsigned int] bytes for '[chars]' Explanation The process failed to allocate memory for the specified resource. Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error Message %L3-IPHC_PROFILE-6-INFO [chars] [chars] [dec] Explanation printing the iphc profile info. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPHC_PROFILE-6-SENDTO Packet send attempt timed out: [chars] Explanation The socket call to send a control packet timed out. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. IPV6_ND_LITE Messages Error Message %L3-IPV6_ND_LITE-3-ERR_ASYNC_SEND_FAIL Send async pulse to ipv6 nd lite process fails; Error [chars] Explanation Attempt to send pulse to IPV6 ND lite process fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_CHAN_CONNECT_FAIL Cannot connect to ipv6 nd lite process; Error [chars] Explanation Attempt to connect to ipv6 nd lite process channel fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SELF_GENERATE IPV6 ND Lite self generated fun: [chars]: line: [dec] Explanation Attempt to munmap the shared memory fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_CACHED_DATA_FAIL Invalid cached shmem addr [hex]; fd [dec] Explanation Attempt to get cached shared memory info fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_GIP_UNAVAILABLE IPV6 ND lite SHMEM can accommodate only [dec] global IP records (request for [dec] records [dec] ) Explanation IPV6 ND has requested transfer of more global IP records than shared memory can accommodate Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_MMAP_FAIL Cannot mmap file [chars]; Error [chars] Explanation Attempt to mmap the shared memory fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_MUNMAP_FAIL Cannot munmap file [chars]; Error [chars] Explanation Attempt to munmap the shared memory fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_OPEN_FAIL Cannot open shmem file [chars]; Error [chars] Explanation Attempt to open the shared memory fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_TRNC_FAIL Cannot truncate file [chars] to [dec] bytes; Error [chars] Explanation Attempt to truncate the shared memory file fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_UNAVAILABLE IPV6 ND lite SHMEM can accommodate only [dec] records (request for [dec] records [dec] ) Explanation IPV6 ND has requested transfer of more interface records than shared memory can accommodate Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %L3-IPV6_ND_LITE-3-ERR_SHMEM_UNLINK_FAIL Cannot unlink file [chars]; Error [chars] Explanation Attempt to unlink the shared memory fails Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show tech-support command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the show tech-support output, call your Cisco technical support representative and provide the representative with the gathered information.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks