Cisco IOS XR System Error Message Reference Guide, Release 3.9.1 - License Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

License Messages

ASR9K_LICENSE Messages

GSR_LCLM_SHOW Messages

LCLICMGR Messages

LICCMD Messages

LICLIB Messages

LICMGR Messages

License Messages

This section contains all License related System Error Messages.

ASR9K_LICENSE Messages
Error Message    
%LICENSE-ASR9K_LICENSE-2-ADV_IP_NEEDED [dec] VRF(s) are configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption.

Explanation The VRF feature is configured without the necessary Adv-IP license.
Recommended Action The customer should either purchase the license or disable the feature.
Error Message     
%LICENSE-ASR9K_LICENSE-2-G_709_NEEDED G.709 feature is configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption.

Explanation The G.709 feature is configured without the necessary license.
Recommended Action The customer should either purchase the license or disable the feature.
Error Message     
%LICENSE-ASR9K_LICENSE-2-INFRA_VRF_NEEDED [dec] VRF(s) are configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption.

Explanation The VRF feature is configured without the necessary iVRF license.
Recommended Action The customer should either purchase the license or disable the feature.
Error Message     
%LICENSE-ASR9K_LICENSE-2-VIDMON_NEEDED VidMon feature is configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption.

Explanation The VidMon feature is configured without the necessary license.
Recommended Action The customer should either purchase the license or disable the feature.
Error Message     
%LICENSE-ASR9K_LICENSE-3-OPERATION_FAIL [chars], error code [chars]

Explanation The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure.
Recommended Action Debug message only. No action is required.

GSR_LCLM_SHOW Messages
Error Message    
%LICENSE-GSR_LCLM_SHOW-3-ERROR gsr_lclm_show: [chars] , [chars]
Explanation GSR_LCLM_SHOW encountered an error
Recommended Action Please enable 'debug sysdb access ...' and capture the output.

LCLICMGR Messages
Error Message    
%LICENSE-LCLICMGR-2-NO_LICENSE Not able to acquire a throughput license for node [chars]
Explanation The Linecard Licensing Manager was not able to acquire a throughput license. Traffic flow through this router may be impacted since the a line card is not operating at the expected throughput rate.
Recommended Action Check throughput license availability using the 'show license pools' command in admin mode. Dump the contents of the Line Card Licensing Manager trace buffer using the 'show lclm trace location loc' command to determine which operation has generated this warning.
Error Message     
%LICENSE-LCLICMGR-3-ERROR gsr_lclm: [chars] , [chars]
Explanation The GSR Line Card Licensing Manager has encountered an error
Recommended Action Please enable 'debug lc-license error' and capture the output. Dump the contents of the Line Card Licensing Manager trace buffer using the 'show lclm trace location loc' command.
Error Message     
%LICENSE-LCLICMGR-3-RATE_MODE_SECURITY_AUTH The system is unable to authenticate the line card rate mode in node: [chars]
Explanation The system has aborted the rate mode verification due to an operation error. This message indicates that an error has occurred during the authentication process itself, the process is incomplete. Therefore, we do not know if the line card is a genuine Cisco product or not. This could indicate a problem with the linecard hardware and warrants further investigation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log. If you require assistance, open a case with the Technical Assistance Center via the Internet ' TAC_CASE_OPEN ', or contact your Cisco technical support representative and provide the representative with the gathered information. Gather information about the linecard using the 'show diag 0/X/CPU0 details' and 'show inventory location 0/X/CPU0' commands.
Error Message     
%LICENSE-LCLICMGR-3-RATE_MODE_SECURITY_FAIL
WARNING!!! The module in node [chars] in this router may not be a genuine Cisco product. Cisco warranties and support programs only apply to genuine Cisco products. If Cisco determines that your insertion of non-Cisco memory, WIC cards, AIM cards, Network Modules, SPA cards, GBICs or other modules into a Cisco product is the cause of a support issue, Cisco may deny support under your warranty or under a Cisco support program such as SmartNet.
Explanation This line card has failed to pass the board authentication. The warning message is generated frequently but the operation of the linecard is not disabled in any way.
Recommended Action Copy the error message exactly as it appears on the console or in the system log. If you require assistance, open a case with the Technical Assistance Center via the Internet ' TAC_CASE_OPEN ', or contact your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LCLICMGR-5-RATE_CHANGE The throughput rate for node [chars] has [chars] to [chars]
Explanation The throughput rate of the specified node has changed. Traffic flow through this router will be impacted since the line card is now operating at a new throughput rate.
Recommended Action This is an informational message and no action is required unless this is an unexpected event. Use the 'show lclm trace location loc' command to see what triggered the change in throughput rate.

LICCMD Messages
Error Message    
%LICENSE-LICCMD-4-LACK_OF_ARG Licensing command argments lack ([chars]) [[dec]]
Explanation The parameters that liccmd recive args from parser is lack.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICCMD-4-TRACE_INIT_FAILED Licensing command library could not initialize tracing ([chars]) [[dec]]
Explanation The license command library could not initialize internal tracing used for technical support.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LICLIB Messages
Error Message    
%LICENSE-LICLIB-3-DB_DIR_ERROR Error creating license management directory: [chars]
Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICLIB-3-NO_APP_MEDIA Could not determine device to use for license database. Reverting to temporary storage. License data will not persist across reloads.
Explanation The disk utilities library did not return a device name to license manager where the persistent license data files can be stored. License information will be stored in a temporary location, and will be lost if the router reloads. Implicit licenses will be available. Permanent or evaluation licenses should not be installed in this state, as they will be lost if the router reloads and will need to be regenerated before they can be installed again.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICLIB-4-TRACE_INIT_FAILED Licensing client library could not initialize tracing ([chars]) [[dec]]
Explanation The license client library could not initialize internal tracing used for technical support.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICLIB-6-DB_DIR_CREATE License management directory created
Explanation The license manager created a directory to store license information. Normally this will occur after the disk holding the license information has been formatted or replaced, or on first boot of a new system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LICMGR Messages
Error Message    
%LICENSE-LICMGR-3-AUTHENTICATION_ERR License manager could not authenticate: Error [chars] while [chars]
Explanation The license manager encountered a problem in the indicated license file Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-CHASSIS_MISMATCH License database and this chassis do not match. If licenses were installed, restore from a backup or contact Cisco TAC.
Explanation The message displays the result of comparing the license database to the current state of the chassis. If the chassis and license database do not match, the license database will be cleared and implicit evaluation licenses will be available for 90 days. This alarm may occur if the route processor card has been moved from one chassis to another.
Recommended Action If a backup of the license database is available it can be restored with the 'license restore' command. Otherwise contact Cisco TAC to obtain a new set of licenses for this system.
Error Message     
%LICENSE-LICMGR-3-DB_CORRUPT License database has been corrupted and will be cleared
Explanation This message occurs when the license manager detects corruption in the license database that cannot be repaired. The license database will be cleared and implicit evaluation licenses will be available for 90 days.
Recommended Action If a backup of the license database is available it can be restored with the 'license restore' command.
Error Message     
%LICENSE-LICMGR-3-DB_DIR_ERROR Error creating license management directory: [chars]
Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-DB_SAVE_ERROR Error saving license database: [chars]
Explanation The license manager encountered an error condition while saving the license database. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-EVENT_FAIL License manager event processing error: [chars]
Explanation The license manager encountered an error condition while processing an event. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-EXIT_ERROR License manager encounted a fatal error condition and is exiting: [chars] ([hex])
Explanation The license manager encountered a fatal error condition, and cannot proceed. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-INIT License manager could not initialize: Error [chars] while [chars]
Explanation The license manager encountered a fatal error condition while initializing. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-NO_OPERATION_ID Could not read operation ID: [chars]
Explanation The license manager encountered an error while attempting to read the license operation ID. Without a valid license operation ID the license manager will not be able to support licenses locked to the affected chassis. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-NO_SERIAL_NUM Could not read chassis serial number: [chars]
Explanation The license manager encountered an error while attempting to read the chassis serial number. Without a valid chassis serial number the license manager will not be able to support licenses locked to the affected chassis. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-SYSDB Unable to access the system database, error: [chars]
Explanation An error occurred when accessing the system database
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-SYSDBREG Registration with SysDB failed [[chars]], error: [chars]
Explanation An error occurred when registering with the system database
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-AUDIT_PROBLEM Problem found during audit [chars] -- [chars]
Explanation The license manager encountered a problem during an internal audit. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-DATASTORE_PROBLEM Problem with datastore [chars] -- [chars]
Explanation The license manager encountered a problem attempting to adjust licenses in the given datastore. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-IMPLICIT_EXPIRED The ninety day implicit license period has expired.
Explanation The period after initial boot during which licensed features can be used without licenses has ended. Licensed features without licenses will cease to operate and cannot be configured. The message will appear even if there are no licensed features configured without licenses at the time.
Recommended Action In order to use licensed features, obtain a license and install it using the 'license add' command in admin mode.
Error Message     
%LICENSE-LICMGR-4-IMPLICIT_LICENSE_USED An implicit license has been used for the [chars] feature.
Explanation A feature which has no license has been enabled because the system is still in the implicit license period, during which licensed features may be used without licenses. When the implicit license period ends the feature will be deactivated unless a license has been installed.
Recommended Action In order to use licensed features, obtain a license and install it using the 'license add' command in admin mode.
Error Message     
%LICENSE-LICMGR-4-IMPLICIT_WILL_EXPIRE The implicit license period will end in [chars]. Contact Cisco if you wish to purchase permanent licenses.
Explanation The period after initial boot during which licensed features can be used without licenses will end in the indicated time. Licensed features without licenses will cease to operate and cannot be configured after that time. The message will appear every day during the implicit license period, even if there are no licensed features configured without licenses.
Recommended Action In order to use licensed features, contact Cisco to purchase permanent licenses then install them using the 'license add' command in admin mode.
Error Message     
%LICENSE-LICMGR-4-LICENSE_EXPIRED Evaluation license for feature [chars] has expired
Explanation The specified feature's evaluation license has expired. The feature will no longer be usable. The message appears even if the feature is not currently configured.
Recommended Action In order to continue using the feature, obtain a license and install it using the 'license add' command in admin mode.
Error Message     
%LICENSE-LICMGR-4-LICENSE_FILE_PROBLEM Problem with licenses from license file [chars]: [chars]
Explanation The license manager encountered an error attempting to install or remove the licenses in the given license file. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-LICENSE_POOL_REMOVED Removed license pool for nonexistant SDR [chars]
Explanation The license database contained a license pool definition for an SDR that does not exist. The licenses assigned to this pool were automatically moved back into the Owner pool.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-LICENSE_RMA_EXPIRED Licenses for feature [chars] with chassis serial number [chars] has expired
Explanation Licenses for the specified feature which were installed using the given chassis serial number have been removed due to the chassis having been disconnected from the system. This message appears even if the removed licenses were not active.
Recommended Action If removed licenses were active, obtain new licenses for one of the currently available chassis serial numbers. Available serial numbers can be checked with the 'show license udi' command.
Error Message     
%LICENSE-LICMGR-4-LICENSE_RMA_WILL_EXPIRE Licenses for feature [chars] with serial number [chars] will expire in [chars]
Explanation Licenses for the specified feature which were installed using the given chassis serial number will be removed in the time indicated unless the chassis is reconnected from the system. This message appears even if the removed licenses are not active.
Recommended Action Confirm that sufficient licenses remain on the system signed with the chassis serial number of available chassis. If necessary, obtain new licenses for the feature and install them with the 'license add' command. If there are sufficient licenses remaining signed with available chassis serial numbers, the message can be stopped by using the 'license remove' command to remove the licenses associated with the specified chassis.
Error Message     
%LICENSE-LICMGR-4-LICENSE_WILL_EXPIRE Evaluation license for feature [chars] will expire in [chars]. Contact Cisco if you wish to purchase a permanent license.
Explanation The specified feature's evaluation license will expire in the time indicated. After the license has expired the feature will become unusable. This message appears even if the feature is not currently configured.
Recommended Action In order to continue using the feature, contact Cisco to purchase a permanent licenses and install it using the 'license add' command in admin mode. If the license is not needed, the messages can be stopped by removing all licenses for that feature using the 'license remove' command in admin mode.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_FEATURE [unsigned int] features cleared
Explanation As a result of 'clear license' command execution, license features installed on this system were cleared.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_NO_FEATURE There are no features to be cleared
Explanation The 'clear license' command was executed, but there are no feature licenses installed to be cleared on this system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_NO_POOL There are no license pools to be cleared
Explanation The 'clear license' command was executed, but there are no pools to be cleared on this system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_POOL [unsigned int] license pools cleared (Owner pool still exists).
Explanation As a result of 'clear license' command execution, license pools other than the Owner pool were cleared.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LOAD_LICENSE_FILE Loading license file [chars]
Explanation The license manager is about to open the named license file to add licenses to the system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LOAD_LICENSE_FILE_OK All licenses from license file [chars] added successfully
Explanation The license manager has installed all the licenses in the named license file to the system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-READ_LICENSE_FILE Opening license backup file [chars]
Explanation The license manager is about to open the named license backup file to show license backup to the user.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-7-CLIENT_NORESPONSE License client [chars] failed to respond
Explanation A license client program failed to respond. This may be due to some inter-process communications problem, or because the client process is blocked.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-7-LICENSE_RECLAIMED An active [chars] license was reclaimed by the license manager and moved to allocated state on node [chars]
Explanation Due to a loss of inter-process communications the license manager had to reclaim a license that was not properly released.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

	Cisco IOS XR System Error Message Reference Guide, Release 3.9.1
	License Messages
Cisco IOS XR System Error Message Reference Guide, Release 3.9.1 Preface Overview Access Control List (ACL) Messages Application Infrastructure Messages Diagnostic Messages Fabric Messages Forwarding Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Layer 3 Messages License Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QoS) Messages Routing Messages Security Messages Services Messages Simple Network Management Protocol (SNMP) Messages System Database Messages Index	Download this chapter License Messages Download the complete book Cisco IOS XR System Error Message Reference Guide, Release 3.9.1 (PDF) (PDF - 30 MB) Feedback Table Of Contents License Messages ASR9K_LICENSE Messages GSR_LCLM_SHOW Messages LCLICMGR Messages LICCMD Messages LICLIB Messages LICMGR Messages License Messages This section contains all License related System Error Messages. ASR9K_LICENSE Messages Error Message %LICENSE-ASR9K_LICENSE-2-ADV_IP_NEEDED [dec] VRF(s) are configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption. Explanation The VRF feature is configured without the necessary Adv-IP license. Recommended Action The customer should either purchase the license or disable the feature. Error Message %LICENSE-ASR9K_LICENSE-2-G_709_NEEDED G.709 feature is configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption. Explanation The G.709 feature is configured without the necessary license. Recommended Action The customer should either purchase the license or disable the feature. Error Message %LICENSE-ASR9K_LICENSE-2-INFRA_VRF_NEEDED [dec] VRF(s) are configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption. Explanation The VRF feature is configured without the necessary iVRF license. Recommended Action The customer should either purchase the license or disable the feature. Error Message %LICENSE-ASR9K_LICENSE-2-VIDMON_NEEDED VidMon feature is configured without license [chars] in violation of the Software Right To Use Agreement. This feature may be disabled by the system without the appropriate license. Contact Cisco to purchase the license immediately to avoid potential service interruption. Explanation The VidMon feature is configured without the necessary license. Recommended Action The customer should either purchase the license or disable the feature. Error Message %LICENSE-ASR9K_LICENSE-3-OPERATION_FAIL [chars], error code [chars] Explanation The particular operation mentioned in the message failed due to some reason. This is not a critical failure, the process can continue functioning as expected despite the failure. Recommended Action Debug message only. No action is required. GSR_LCLM_SHOW Messages Error Message %LICENSE-GSR_LCLM_SHOW-3-ERROR gsr_lclm_show: [chars] , [chars] Explanation GSR_LCLM_SHOW encountered an error Recommended Action Please enable 'debug sysdb access ...' and capture the output. LCLICMGR Messages Error Message %LICENSE-LCLICMGR-2-NO_LICENSE Not able to acquire a throughput license for node [chars] Explanation The Linecard Licensing Manager was not able to acquire a throughput license. Traffic flow through this router may be impacted since the a line card is not operating at the expected throughput rate. Recommended Action Check throughput license availability using the 'show license pools' command in admin mode. Dump the contents of the Line Card Licensing Manager trace buffer using the 'show lclm trace location loc' command to determine which operation has generated this warning. Error Message %LICENSE-LCLICMGR-3-ERROR gsr_lclm: [chars] , [chars] Explanation The GSR Line Card Licensing Manager has encountered an error Recommended Action Please enable 'debug lc-license error' and capture the output. Dump the contents of the Line Card Licensing Manager trace buffer using the 'show lclm trace location loc' command. Error Message %LICENSE-LCLICMGR-3-RATE_MODE_SECURITY_AUTH The system is unable to authenticate the line card rate mode in node: [chars] Explanation The system has aborted the rate mode verification due to an operation error. This message indicates that an error has occurred during the authentication process itself, the process is incomplete. Therefore, we do not know if the line card is a genuine Cisco product or not. This could indicate a problem with the linecard hardware and warrants further investigation. Recommended Action Copy the error message exactly as it appears on the console or in the system log. If you require assistance, open a case with the Technical Assistance Center via the Internet ' TAC_CASE_OPEN ', or contact your Cisco technical support representative and provide the representative with the gathered information. Gather information about the linecard using the 'show diag 0/X/CPU0 details' and 'show inventory location 0/X/CPU0' commands. Error Message %LICENSE-LCLICMGR-3-RATE_MODE_SECURITY_FAIL WARNING!!! The module in node [chars] in this router may not be a genuine Cisco product. Cisco warranties and support programs only apply to genuine Cisco products. If Cisco determines that your insertion of non-Cisco memory, WIC cards, AIM cards, Network Modules, SPA cards, GBICs or other modules into a Cisco product is the cause of a support issue, Cisco may deny support under your warranty or under a Cisco support program such as SmartNet. Explanation This line card has failed to pass the board authentication. The warning message is generated frequently but the operation of the linecard is not disabled in any way. Recommended Action Copy the error message exactly as it appears on the console or in the system log. If you require assistance, open a case with the Technical Assistance Center via the Internet ' TAC_CASE_OPEN ', or contact your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LCLICMGR-5-RATE_CHANGE The throughput rate for node [chars] has [chars] to [chars] Explanation The throughput rate of the specified node has changed. Traffic flow through this router will be impacted since the line card is now operating at a new throughput rate. Recommended Action This is an informational message and no action is required unless this is an unexpected event. Use the 'show lclm trace location loc' command to see what triggered the change in throughput rate. LICCMD Messages Error Message %LICENSE-LICCMD-4-LACK_OF_ARG Licensing command argments lack ([chars]) [[dec]] Explanation The parameters that liccmd recive args from parser is lack. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICCMD-4-TRACE_INIT_FAILED Licensing command library could not initialize tracing ([chars]) [[dec]] Explanation The license command library could not initialize internal tracing used for technical support. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. LICLIB Messages Error Message %LICENSE-LICLIB-3-DB_DIR_ERROR Error creating license management directory: [chars] Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICLIB-3-NO_APP_MEDIA Could not determine device to use for license database. Reverting to temporary storage. License data will not persist across reloads. Explanation The disk utilities library did not return a device name to license manager where the persistent license data files can be stored. License information will be stored in a temporary location, and will be lost if the router reloads. Implicit licenses will be available. Permanent or evaluation licenses should not be installed in this state, as they will be lost if the router reloads and will need to be regenerated before they can be installed again. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICLIB-4-TRACE_INIT_FAILED Licensing client library could not initialize tracing ([chars]) [[dec]] Explanation The license client library could not initialize internal tracing used for technical support. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICLIB-6-DB_DIR_CREATE License management directory created Explanation The license manager created a directory to store license information. Normally this will occur after the disk holding the license information has been formatted or replaced, or on first boot of a new system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. LICMGR Messages Error Message %LICENSE-LICMGR-3-AUTHENTICATION_ERR License manager could not authenticate: Error [chars] while [chars] Explanation The license manager encountered a problem in the indicated license file Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-CHASSIS_MISMATCH License database and this chassis do not match. If licenses were installed, restore from a backup or contact Cisco TAC. Explanation The message displays the result of comparing the license database to the current state of the chassis. If the chassis and license database do not match, the license database will be cleared and implicit evaluation licenses will be available for 90 days. This alarm may occur if the route processor card has been moved from one chassis to another. Recommended Action If a backup of the license database is available it can be restored with the 'license restore' command. Otherwise contact Cisco TAC to obtain a new set of licenses for this system. Error Message %LICENSE-LICMGR-3-DB_CORRUPT License database has been corrupted and will be cleared Explanation This message occurs when the license manager detects corruption in the license database that cannot be repaired. The license database will be cleared and implicit evaluation licenses will be available for 90 days. Recommended Action If a backup of the license database is available it can be restored with the 'license restore' command. Error Message %LICENSE-LICMGR-3-DB_DIR_ERROR Error creating license management directory: [chars] Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-DB_SAVE_ERROR Error saving license database: [chars] Explanation The license manager encountered an error condition while saving the license database. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-EVENT_FAIL License manager event processing error: [chars] Explanation The license manager encountered an error condition while processing an event. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-EXIT_ERROR License manager encounted a fatal error condition and is exiting: [chars] ([hex]) Explanation The license manager encountered a fatal error condition, and cannot proceed. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-INIT License manager could not initialize: Error [chars] while [chars] Explanation The license manager encountered a fatal error condition while initializing. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-NO_OPERATION_ID Could not read operation ID: [chars] Explanation The license manager encountered an error while attempting to read the license operation ID. Without a valid license operation ID the license manager will not be able to support licenses locked to the affected chassis. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-NO_SERIAL_NUM Could not read chassis serial number: [chars] Explanation The license manager encountered an error while attempting to read the chassis serial number. Without a valid chassis serial number the license manager will not be able to support licenses locked to the affected chassis. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-SYSDB Unable to access the system database, error: [chars] Explanation An error occurred when accessing the system database Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-SYSDBREG Registration with SysDB failed [[chars]], error: [chars] Explanation An error occurred when registering with the system database Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-AUDIT_PROBLEM Problem found during audit [chars] -- [chars] Explanation The license manager encountered a problem during an internal audit. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-DATASTORE_PROBLEM Problem with datastore [chars] -- [chars] Explanation The license manager encountered a problem attempting to adjust licenses in the given datastore. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-IMPLICIT_EXPIRED The ninety day implicit license period has expired. Explanation The period after initial boot during which licensed features can be used without licenses has ended. Licensed features without licenses will cease to operate and cannot be configured. The message will appear even if there are no licensed features configured without licenses at the time. Recommended Action In order to use licensed features, obtain a license and install it using the 'license add' command in admin mode. Error Message %LICENSE-LICMGR-4-IMPLICIT_LICENSE_USED An implicit license has been used for the [chars] feature. Explanation A feature which has no license has been enabled because the system is still in the implicit license period, during which licensed features may be used without licenses. When the implicit license period ends the feature will be deactivated unless a license has been installed. Recommended Action In order to use licensed features, obtain a license and install it using the 'license add' command in admin mode. Error Message %LICENSE-LICMGR-4-IMPLICIT_WILL_EXPIRE The implicit license period will end in [chars]. Contact Cisco if you wish to purchase permanent licenses. Explanation The period after initial boot during which licensed features can be used without licenses will end in the indicated time. Licensed features without licenses will cease to operate and cannot be configured after that time. The message will appear every day during the implicit license period, even if there are no licensed features configured without licenses. Recommended Action In order to use licensed features, contact Cisco to purchase permanent licenses then install them using the 'license add' command in admin mode. Error Message %LICENSE-LICMGR-4-LICENSE_EXPIRED Evaluation license for feature [chars] has expired Explanation The specified feature's evaluation license has expired. The feature will no longer be usable. The message appears even if the feature is not currently configured. Recommended Action In order to continue using the feature, obtain a license and install it using the 'license add' command in admin mode. Error Message %LICENSE-LICMGR-4-LICENSE_FILE_PROBLEM Problem with licenses from license file [chars]: [chars] Explanation The license manager encountered an error attempting to install or remove the licenses in the given license file. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-LICENSE_POOL_REMOVED Removed license pool for nonexistant SDR [chars] Explanation The license database contained a license pool definition for an SDR that does not exist. The licenses assigned to this pool were automatically moved back into the Owner pool. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-LICENSE_RMA_EXPIRED Licenses for feature [chars] with chassis serial number [chars] has expired Explanation Licenses for the specified feature which were installed using the given chassis serial number have been removed due to the chassis having been disconnected from the system. This message appears even if the removed licenses were not active. Recommended Action If removed licenses were active, obtain new licenses for one of the currently available chassis serial numbers. Available serial numbers can be checked with the 'show license udi' command. Error Message %LICENSE-LICMGR-4-LICENSE_RMA_WILL_EXPIRE Licenses for feature [chars] with serial number [chars] will expire in [chars] Explanation Licenses for the specified feature which were installed using the given chassis serial number will be removed in the time indicated unless the chassis is reconnected from the system. This message appears even if the removed licenses are not active. Recommended Action Confirm that sufficient licenses remain on the system signed with the chassis serial number of available chassis. If necessary, obtain new licenses for the feature and install them with the 'license add' command. If there are sufficient licenses remaining signed with available chassis serial numbers, the message can be stopped by using the 'license remove' command to remove the licenses associated with the specified chassis. Error Message %LICENSE-LICMGR-4-LICENSE_WILL_EXPIRE Evaluation license for feature [chars] will expire in [chars]. Contact Cisco if you wish to purchase a permanent license. Explanation The specified feature's evaluation license will expire in the time indicated. After the license has expired the feature will become unusable. This message appears even if the feature is not currently configured. Recommended Action In order to continue using the feature, contact Cisco to purchase a permanent licenses and install it using the 'license add' command in admin mode. If the license is not needed, the messages can be stopped by removing all licenses for that feature using the 'license remove' command in admin mode. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_FEATURE [unsigned int] features cleared Explanation As a result of 'clear license' command execution, license features installed on this system were cleared. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_NO_FEATURE There are no features to be cleared Explanation The 'clear license' command was executed, but there are no feature licenses installed to be cleared on this system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_NO_POOL There are no license pools to be cleared Explanation The 'clear license' command was executed, but there are no pools to be cleared on this system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_POOL [unsigned int] license pools cleared (Owner pool still exists). Explanation As a result of 'clear license' command execution, license pools other than the Owner pool were cleared. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LOAD_LICENSE_FILE Loading license file [chars] Explanation The license manager is about to open the named license file to add licenses to the system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LOAD_LICENSE_FILE_OK All licenses from license file [chars] added successfully Explanation The license manager has installed all the licenses in the named license file to the system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-READ_LICENSE_FILE Opening license backup file [chars] Explanation The license manager is about to open the named license backup file to show license backup to the user. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-7-CLIENT_NORESPONSE License client [chars] failed to respond Explanation A license client program failed to respond. This may be due to some inter-process communications problem, or because the client process is blocked. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-7-LICENSE_RECLAIMED An active [chars] license was reclaimed by the license manager and moved to allocated state on node [chars] Explanation Due to a loss of inter-process communications the license manager had to reclaim a license that was not properly released. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks