Cisco IOS XR Software

Perl Data Object Documentation for root_objects, version 1. 0.

Objects

    Description: Root object for configuration
    Child objects: 
        AAA - Authentication, Authorization and Accounting
        APS - SONET Automatic Protection Switching (APS) configuration
        ARP - ARP configuration
        ATM - Global ATM configuration
        ActiveNodeTable - Per-node configuration for active nodes
        BFD - BFD Configuration
        BGP - BGP configuration commands
        CDP - Global CDP configuration data
        ControlPlane - Configure control Plane
        Crypto - Crypto configuration
        DHCPV6D - IPV6 DHCP config data
        DynamicConfigurationTemplates - All dynamic template configurations
        EIGRP - Configure Neighbor
        ES_ACL - Layer 2 ACL configuration data
        EtherLinkOAMGlobalConfig - Ethernet Link OAM Global Configuration
        EthernetFeatures - Ethernet Features Configuration
        GlobalAFI_SAFITable - Default VRF configuration
        GlobalInterfaceConfiguration - The configuration for all interfaces
        HSRPCfg - HSRP configuration
        ICMP - IP ICMP configuration data
        IGMP - IGMPconfiguration
        IP - IP TCP Configuration Data
        IPAddressPool - IP address pool configuration data
        IPExplicitPaths - IP Explicit Path config data
        IPSLA - IPSLA configuration
        IPV4DHCPD - Dhcp Ipv4 configuration
        IPV4NetworkGlobal - IPv4 network global configuration data
        IPV4_ACLAndPrefixList - IPv4 ACL configuration data
        IPV6_ACLAndPrefixList - IPv6 ACL configuration data
        IP_ARM - IP Address Repository Manager (IPv4/IPv6 ARM) configuration data
        IP_TCP - Global IP TCP configuration
        ISIS - IS-IS configuration for all instances
        InterfaceConfigurationTable - The configuration for all interfaces
        Ipv4Pool - Configure IPv4 Pool
        KeychainTable - Configure a Key Chain
        L2VPN - L2VPN configuration
        LACP - Link Aggregation Control Protocol commands
        LR - The pairing configuration is held in here.
        MFWD - Multicast routing configuration
        MPLSInfra - The root of MPLS infrastructure configuration
        MPLS_LDP - MPLS LDP configuration
        MPLS_LSD - MPLS LSD configuration data
        MPLS_OAM - MPLS LSP verification configuration
        MPLS_TE - The root of MPLS TE configuration
        MSDP - MSDP Configuration
        NTP - NTP configuration
        NetFlow - NetFlow Configuration
        OSPF - OSPF configuration data
        OUNI - OUNI Configuration
        PIM - PIM configuration
        Parser - Parser configuration
        PerfMgmt - Performance Management configuration & operations
        Placement - Process placement configuration
        PolicyManager - Global Policy Manager configuration.
        PreconfiguredNodeTable - Per-node configuration for non-active nodes
        QOS - Global QOS configuration.
        RIP - RIP configuration
        RSVP - Global RSVP configuration commands
        RouterStatic - This class represent router static submode configuration
        RoutingPolicy - Routing policy configuration
        SAP - SAP Listener
        SBCService - Session Border Controller Configuration
        SNMP - The heirarchy point for all the SNMP configurations
        ServiceRoleConfigurationTable - Service Role configuration.
        Syslog - Modify message logging facilities
        SyslogService - Syslog Timestamp Services
        TTY - TTY Line Configuration
        Tunnel - Tunnel template used for L3 VPNs
        UDP_SNMP - UDP SNMP heirarchy point
        VRFTable - VRF configuration
        VRRPCfg - VRRP configuration
        VTY - VTY Pools configuration
    Applicable methods: find_data

    Description: Root object for operational data
    Child objects: 
        AAA - AAA operational data
        APS - SONET Automatic Protection Switching (APS) info
        ATM_ILMI - ATM ILMI operational data
        ATM_OAM - ATM OAM operational data
        ATM_VCClass - ATM VC class data
        ATM_VCM - ATM VCM operational data
        AlarmLogger - Alarm Logger operational data
        AlphaDisplay - Alpha Display Operational data space
        AutoRP - AutoRP operational data
        BFD - Bidirectional Forwarding Detection(BFD) operational data
        BGP - BGP operational data
        Bundles - Bundle operational data
        CDP - CDP operational data
        CHDLC_MA - Per interface operational data for the cHDLC MA
        Correlator - Correlator operational data
        CryptoCertificateAuthority - Public Key Infrastructure Related Information
        CryptoEngine - Crypto Engine
        DHCPV6D - IPV6 DHCP operational data
        DPT - DPT operational data
        DWDM - DWDM operational data
        EIGRP - EIGRP operational data
        ES_ACL - Root class of ES ACL Oper schema tree
        EnvironmentalMonitoring - Environmental Monitoring Operational data space
        EtherLinkOAM - Ethernet Link OAM operational data
        HSRPOper - HSRP operational data
        IKE - IKE operational data
        IPAddressPoolProxy - IP address pool proxy operational data
        IPAddressPoolServer - IP address pool operational data
        IPSLA - IPSLA operational data
        IPSecDynamicSessionInfo - IPSec operational data
        IPSecStaticSessionInfo - IPSec operational data
        IPV4ARM - IPv4 Address Repository Manager (IPv4 ARM) operational data
        IPV4DHCPD - IPv4 DHCPD operational data
        IPV4Network - IPv4 network operational data
        IPV4_ACLAndPrefixList - Root class of IPv4 Oper schema tree
        IPV6ARM - IPv6 Address Repository Manager (IPv6 ARM) operational data
        IPV6Network - IPv6 network operational data
        IPV6_ACLAndPrefixList - Root class of IPv6 Oper schema tree
        ISIS - IS-IS operational data
        InfraPacketManager - Packet manager infrastructure
        InfraStatistics - Statistics Infrastructure
        InterfaceAttributes - Hardware and software attributes for interfaces
        InterfaceProperties - Non feature-specific interface operational data
        Inventory - Logical Router Inventory operational data
        Ipv4Pool - IPv4 Pool operational data
        L2VPN - L2VPN operational data
        L2VPNForwarding - Show L2VPN forwarding
        L3VPN - L3VPN operational data
        LACPBundleMembers - LACP Bundle Member operational data
        LACPBundles - LACP bundle data
        LACPData - LACP data
        LR - Information about the current LR scoped state of LR inventory.
        MFWD - MFWD operational data
        MPLS_LDP - MPLS LDP operational data
        MPLS_PCE - MPLS PCE operational data
        MRIB - MRIB operational data
        MSDP - MSDP operational data
        MgmtMultilink - MgmtMultilink controller operational data
        Multilink - Multilink interface operational data
        NTP - NTP operational data
        NetFlow - NetFlow operational data
        OSPF - OSPF operational data
        PIM - PIM operational data
        PM - PM operational data
        PPP - PPP operational data
        PerfMgmt - Performance Management agent operational data
        PerformanceManagement - DWDM performace data
        Placement - Process placement operational state
        PlatformInventory - Inventory operational data
        PolicyManager - Policy-map operational data
        QOS - QOS operational data
        RIP - RIP operational data
        RoutingPolicy - Routing policy operational data
        SAP - SAP operational data
        SNMP - SNMP operational data
        SONET - SONET operational data
        SONET_SDH - SONET-SDH operational data
        SRP - SRP operational data
        Sbc - SBC operational Data
        ServiceDiversion - Service Diversion operational data
        ServiceRedundancy - Service Redundancy operational data
        ServiceRole - Service Role Daemon operational data
        Suppression - Suppression operational data
        T1E1 - T1E1 operational data
        T3E3 - T3E3 operational data
        TCPConnection - TCP connection operational data
        TCP_NSR - TCP NSR operational data
        TTY - TTY Line Configuration
        VLAN - VLAN operational data
        VRRPOper - VRRP operational data
        WANPHY - WANPHY operational data

    Description: Root object for action data
    Child objects: 
        AlarmLogger - Alarm Logger action data
        BGP - Container class for BGP action data
        CDP - CDP action data
        ClearL2VPNForwardingStatistics - Clear L2VPN forwarding statistics
        Correlator - Correlator action data
        CryptoIKE - Container class for crypto IKE action data
        CryptoIpsec - Container class for crypto IPSec action data
        DHCPV6D - IPV6 DHCP action data
        DPT - DPT action data
        DWDM - DWDM action data
        EIGRP - EIGRP action data
        ES_ACL - ES ACL actions
        EtherLinkOAM - Ethernet Link OAM action commands
        IGMP - IGMP action data
        IPV4DHCPD - IPV4 DHCPD Proxy actions
        IPV4_ACLAndPrefixList - IPv4 ACL actions
        IPV4_DHCPD - IPV4 DHCPD Snoop actions
        IPV6_ACLAndPrefixList - IPv6 ACL and PrefixList actions
        ISIS - IS-IS action data
        InfraStatistics - Statistics Infrastructure
        L2VPN - L2VPN actions
        L2VPNForwarding - L2VPN forwarding actions
        LACPBundleMembers - LACP action commands
        MFWD - Multicast Forwarding action data
        MFWDPlatform - Hardware Multicast Forwarding action commands
        MPLS_LCAC - MPLS-LCAC action data
        MPLS_LDP - MPLS LDP action data
        MPLS_LSD - MPLS LSD action data
        MPLS_TE - MPLS Traffic Engineering action data
        MSDP - MSDP action data
        MgmtMultilink - Multilink controller action data
        NTP - NTP action data
        NetFlow - NetFlow action data
        OSPF - OSPF action data
        PCE - PCE action data
        PIM - PIM action data
        Placement - Process placement action data
        QOS - QOS action data
        RIP - RIP action data
        RSVP - RSVP actions
        SNMP - SNMP action data
        SONET - SONET action data
        SRP - SRP actions
        ServiceRedundancy - Service Redundancy Actions
        T1E1 - T1E1 action data
        T3E3 - T3E3 action data
        TCP - TCP action data
        TCP_NSR - NSR action data
        WANPHY - WANPHY action data

    Description: Root object for admin-plane operational data
    Task IDs required: admin
    Child objects: 
        AlphaDisplay - Alpha Display Operational data space
        EnvironmentalMonitoring - Environmental Monitoring Operational data space
        Install - Information of software packages and install operations
        Inventory - Inventory operational data
        License - Information of license list and operations
        NTP - NTP admin operational data
        PlatformInventory - Inventory operational data

    Description: Root object for admin-plane action data
    Task IDs required: admin
    Child objects: 
        License - Information of license operations

Perl Data Object Documentation for mpls_lcac_action, version 1. 4.

Objects

    Description: MPLS-LCAC action data
    Task IDs required: mpls-te
    Parent objects: 
        Action
    Child objects: 
        Clear - MPLS-LCAC counters clearing action.
        FloodAllLocalLinks - Causes an immediate flooding of all the local links.
    Applicable methods: set_data

    Description: MPLS-LCAC counters clearing action.
    Parent objects: 
        MPLS_LCAC
    Child objects: 
        Statistics - Clears all the statistics in MPLS-LCAC.
    Applicable methods: set_data

    Description: Clears all the statistics in MPLS-LCAC.
    Parent objects: 
        Clear
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: True only
    Default value: none.
    Applicable methods: set_data

    Description: Causes an immediate flooding of all the local links.
    Parent objects: 
        MPLS_LCAC
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: True only
    Default value: none.
    Applicable methods: set_data

Perl Data Object Documentation for ip_static_cfg, version 2. 0.

Objects

    Description: This class represent router static submode configuration
    Task IDs required: static
    Parent objects: 
        Configuration
    Child objects: 
        DefaultVRF - Default VRF configuration
        MaximumRoutes - The maximum number of static routes that can be configured.
        VRFTable - VRF static configuration container
    Applicable methods: find_data, set_data, delete_data

    Description: The maximum number of static routes that can be configured.
    Parent objects: 
        RouterStatic
    Child objects: 
        MaxIPV4Value - The maximum number of static routes that can be configured for IPv4 AFI.
        MaxIPV6Value - The maximum number of static routes that can be configured for IPv6 AFI.
    Applicable methods: find_data, set_data, delete_data

    Description: The maximum number of static routes that can be configured for IPv4 AFI.
    Parent objects: 
        MaximumRoutes
    Values: 
        MaximumRoutes (mandatory)
            Type: Range. Value lies between 1 and 140000
            Description: The maximum number of static routes that can be configured for this AFI
    Default value: 
        MaximumRoutes => 4000
    Applicable methods: get_data, set_data, delete_data

    Description: The maximum number of static routes that can be configured for IPv6 AFI.
    Parent objects: 
        MaximumRoutes
    Values: 
        MaximumRoutes (mandatory)
            Type: Range. Value lies between 1 and 140000
            Description: The maximum number of static routes that can be configured for this AFI
    Default value: 
        MaximumRoutes => 4000
    Applicable methods: get_data, set_data, delete_data

    Description: Default VRF configuration
    Parent objects: 
        RouterStatic
    Child objects: 
        AddressFamily - Address family configuration
    Applicable methods: find_data, set_data, delete_data

    Description: Address family configuration
    Parent objects: 
        DefaultVRF
        VRF
    Child objects: 
        VRFIPV4 - IPv4 static configuration
        VRFIPV6 - IPv6 static configuration
    Applicable methods: find_data, set_data, delete_data

    Description: IPv4 static configuration
    Parent objects: 
        AddressFamily
    Child objects: 
        VRFMulticast - Multicast static configuration
        VRFUnicast - Unicast static configuration
    Applicable methods: find_data, set_data, delete_data

    Description: Unicast static configuration
    Parent objects: 
        VRFIPV4
        VRFIPV6
    Child objects: 
        DefaultTopology - Default topology configuration
        TopologyTable - Topology static configuration container
        VRFPrefixTable - The set of all Static Topologies for this AFI.
    Applicable methods: find_data, set_data, delete_data

    Description: The set of all Static Topologies for this AFI.
    Parent objects: 
        VRFUnicast
        VRFMulticast
    Child objects: 
        VRFPrefix - A static route
    Applicable methods: get_keys, set_data, delete_data

    Description: A static route
    Parent objects: 
        VRFPrefixTable
    Keys: 
        Prefix
            Type: IPAddress
            Description: Destination prefix
        Length
            Type: Range. Value lies between 0 and 128
            Description: Destination prefix length
    Child objects: 
        VRFRecurseRouteTable - A recursive next VRF static route
        VRFRouteTable - A connected or recursive  static route
    Applicable methods: find_data, set_data, delete_data

    Description: A recursive next VRF static route
    Parent objects: 
        VRFPrefix
        VRFPrefixTopology
    Child objects: 
        VRFRecurseRoute - A recursive next vrf static route
    Applicable methods: get_keys, set_data, delete_data

    Description: A recursive next vrf static route
    Parent objects: 
        VRFRecurseRouteTable
    Keys: 
        VRFName (mandatory)
            Type: xsd:string
            Description: Fallback or recusive vrf name
    Child objects: 
        VRFRecursiveNexthopInfoTable - The set of nexthop information configured for this route
    Applicable methods: find_data, set_data, delete_data

    Description: The set of nexthop information configured for this route
    Parent objects: 
        VRFRecurseRoute
    Child objects: 
        VRFNexthopInfo - A forwarding interface and/or the address of a nexthop router for this route (one of these must be specified)
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: A forwarding interface and/or the address of a nexthop router for this route (one of these must be specified)
    Parent objects: 
        VRFNexthopInfoTable
        VRFRecursiveNexthopInfoTable
    Keys: 
        Interface
            Type: Interface
            Description: Forwarding interface
        Address
            Type: IPAddress
            Description: Nexthop address
    Values: 
        BFDFastDetect
            Type: xsd:boolean
            Description: If set, bfd is enabled
        MinimumInterval
            Type: Range. Value lies between 10 and 10000
            Description: BFD Hello interval in milliseconds
        DetectMultiplier
            Type: Range. Value lies between 1 and 10
            Description: BFD Detect Multiplier
        Metric
            Type: Range. Value lies between 1 and 254
            Description: Distance metric for this path
        Tag
            Type: Range. Value lies between 1 and -1
            Description: Tag for this path
        PermanentFlag
            Type: xsd:boolean
            Description: If set, path is permanent
        VRFLablel
            Type: Range. Value lies between 0 and -1
            Description: VRF LABEL
        TunneID
            Type: Range. Value lies between 0 and 65535
            Description: Tunnel ID for this path
        Description
            Type: xsd:string
            Description: Short Description of Static Route
    Default value: 
        BFDFastDetect => false
        MinimumInterval => 100
        DetectMultiplier => 3
        Metric => 1
        Tag => null
        PermanentFlag => false
        VRFLablel => 0
        TunneID => 0
        Description => 
    Applicable methods: get_data, set_data, delete_data

    Description: A connected or recursive  static route
    Parent objects: 
        VRFPrefix
        VRFPrefixTopology
    Child objects: 
        VRFNexthopInfoTable - The set of nexthop information configured for this route
    Applicable methods: find_data, set_data, delete_data

    Description: The set of nexthop information configured for this route
    Parent objects: 
        VRFRouteTable
    Child objects: 
        VRFNexthopInfo - A forwarding interface and/or the address of a nexthop router for this route (one of these must be specified)
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Default topology configuration
    Parent objects: 
        VRFUnicast
        VRFMulticast
    Child objects: 
        VRFPrefixTopologyTable - The set of all Static Topologies for this AFI.
    Applicable methods: find_data, set_data, delete_data

    Description: The set of all Static Topologies for this AFI.
    Parent objects: 
        DefaultTopology
        Topology
    Child objects: 
        VRFPrefixTopology - A static route
    Applicable methods: get_keys, set_data, delete_data

    Description: A static route
    Parent objects: 
        VRFPrefixTopologyTable
    Keys: 
        Prefix
            Type: IPAddress
            Description: Destination prefix
        Length
            Type: Range. Value lies between 0 and 128
            Description: Destination prefix length
    Child objects: 
        VRFRecurseRouteTable - A recursive next VRF static route
        VRFRouteTable - A connected or recursive  static route
    Applicable methods: find_data, set_data, delete_data

    Description: Topology static configuration container
    Parent objects: 
        VRFUnicast
        VRFMulticast
    Child objects: 
        Topology - Topology static configuration
    Applicable methods: get_keys, set_data, delete_data

    Description: Topology static configuration
    Parent objects: 
        TopologyTable
    Keys: 
        TopologyName (mandatory)
            Type: xsd:string
            Description: Topology name
    Child objects: 
        VRFPrefixTopologyTable - The set of all Static Topologies for this AFI.
    Applicable methods: find_data, set_data, delete_data

    Description: Multicast static configuration
    Parent objects: 
        VRFIPV4
        VRFIPV6
    Child objects: 
        DefaultTopology - Default topology configuration
        TopologyTable - Topology static configuration container
        VRFPrefixTable - The set of all Static Topologies for this AFI.
    Applicable methods: find_data, set_data, delete_data

    Description: IPv6 static configuration
    Parent objects: 
        AddressFamily
    Child objects: 
        VRFMulticast - Multicast static configuration
        VRFUnicast - Unicast static configuration
    Applicable methods: find_data, set_data, delete_data

    Description: VRF static configuration container
    Parent objects: 
        RouterStatic
    Child objects: 
        VRF - VRF static configuration
    Applicable methods: get_keys, set_data, delete_data

    Description: VRF static configuration
    Parent objects: 
        VRFTable
    Keys: 
        VRFName (mandatory)
            Type: xsd:string
            Description: VRF name
    Child objects: 
        AddressFamily - Address family configuration
    Applicable methods: find_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'Unicast' - Unicast
        'Multicast' - Multicast

    Description: Container class for crypto IPSec action data
    Task IDs required: crypto
    Parent objects: 
        Action
    Child objects: 
        Clear - Container class for clear actions
    Applicable methods: set_data

    Description: Container class for clear actions
    Parent objects: 
        CryptoIpsec
    Child objects: 
        AllSecurityAssociations - Clear all IPSec SAs
        AllSecurityAssociationsCouters - Clear all IPSEC SA Counters
        AllStatistics - Clear all IPSec VRF statistics
        Counters - IPSec SA Counters
        SecurityAssociationTable - IPSec SA Table
        SecurityAssociationsForInterfaceTable - IPSec Interface Table
        Statistics - IPSec VRF statistics
    Applicable methods: set_data

    Description: IPSec SA Table
    Parent objects: 
        Clear
    Child objects: 
        SecurityAssociation - SA Entry
    Applicable methods: set_data

    Description: SA Entry
    Parent objects: 
        SecurityAssociationTable
    Keys: 
        ID (mandatory)
            Type: xsd:unsignedInt
            Description: SA ID
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear SA
    Default value: none.
    Applicable methods: set_data

    Description: Clear all IPSec SAs
    Parent objects: 
        Clear
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear all SAs
    Default value: none.
    Applicable methods: set_data

    Description: IPSec Interface Table
    Parent objects: 
        Clear
    Child objects: 
        Interface - Interface Entry
    Applicable methods: set_data

    Description: Interface Entry
    Parent objects: 
        SecurityAssociationsForInterfaceTable
    Keys: 
        Interface (mandatory)
            Type: Interface
            Description: IPSec interface name
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear SAa for Interface
    Default value: none.
    Applicable methods: set_data

    Description: IPSec SA Counters
    Parent objects: 
        Clear
    Child objects: 
        SecurityAssociation - SA Entry
    Applicable methods: set_data

    Description: SA Entry
    Parent objects: 
        Counters
    Keys: 
        ID (mandatory)
            Type: xsd:unsignedInt
            Description: SA ID
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear SA countes
    Default value: none.
    Applicable methods: set_data

    Description: Clear all IPSEC SA Counters
    Parent objects: 
        Clear
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear all SAs
    Default value: none.
    Applicable methods: set_data

    Description: IPSec VRF statistics
    Parent objects: 
        Clear
    Child objects: 
        VRF - IVRF name
    Applicable methods: set_data

    Description: IVRF name
    Parent objects: 
        Statistics
    Keys: 
        VRF (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: IVRF name
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear SA countes
    Default value: none.
    Applicable methods: set_data

    Description: Clear all IPSec VRF statistics
    Parent objects: 
        Clear
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear all SAs
    Default value: none.
    Applicable methods: set_data

Perl Data Object Documentation for manageability_perf_cfg_common, version 4. 0.

Objects

    Description: Performance Management configuration & operations
    Task IDs required: monitor
    Parent objects: 
        Configuration
    Child objects: 
        Enable - Start data collection and/or threshold monitoring
        Resources - Resources configuration
        Statistics - Templates for collection of statistics
        Threshold - Container for threshold templates
    Applicable methods: find_data, set_data, delete_data

    Description: Resources configuration
    Parent objects: 
        PerfMgmt
    Child objects: 
        MemoryResources - Configure the memory usage limits of performance management
        TFTPResources - Configure the TFTP server IP address and directory name
    Applicable methods: find_data, set_data, delete_data

    Description: Configure the TFTP server IP address and directory name
    Parent objects: 
        Resources
    Values: 
        ServerAddress
            Type: IPV4Address
            Description: IP address of the TFTP server
        Directory
            Type: xsd:string
            Description: Directory name on TFTP server
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure the memory usage limits of performance management
    Parent objects: 
        Resources
    Values: 
        MaxLimit
            Type: xsd:unsignedInt
            Description: Maximum limit for memory usage (Kbytes) for data buffers
        MinReserved
            Type: xsd:unsignedInt
            Description: Specify a minimum free memory (Kbytes) to be ensured before allowing a collection request
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Start data collection and/or threshold monitoring
    Parent objects: 
        PerfMgmt
    Child objects: 
        MonitorEnable - Start data collection for a monitored instance
        Statistics - Start periodic collection using a defined a template
        Threshold - Start threshold monitoring using a defined template
    Applicable methods: find_data, set_data, delete_data

Datatypes

    Definition: Range. Value lies between 0 and -1

    Description: Information of license list and operations
    Task IDs required: sysmgr
    Parent objects: 
        AdminOperational
    Child objects: 
        BackupTable - License backup file information
        Log - License operation log
        PoolTable - License Pools configuration information
        RehostTickets - Rehost Tickets information
        Status - Status information of license
        UDIInformationTable - Unique Device Identifier information
    Applicable methods: find_data

    Description: Status information of license
    Parent objects: 
        License
    Child objects: 
        Active - Active license information
        Allocated - Allocated license information
        Available - Available license information
        Evaluation - Evaluation license information
        Expired - Expired license information
        FeatureTable - Feature ID information of license
        LocationTable - Location information of license
        SDRTable - Secure Domain Router information of license
    Applicable methods: find_data

    Description: Active license information
    Parent objects: 
        Status
    Child objects: 
        FeatureTable - Feature ID information of license
        LocationTable - Location information of license
        SDRTable - Secure Domain Router information of license
    Applicable methods: find_data

    Description: Feature ID information of license
    Parent objects: 
        Status
        Active
        Allocated
        Available
        Evaluation
        Expired
    Child objects: 
        Feature - License information for specific feature
    Applicable methods: get_keys, get_entries

    Description: License information for specific feature
    Parent objects: 
        FeatureTable
    Keys: 
        Feature (mandatory)
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
    Value: license_request_feature
    Applicable methods: get_data

    Description: Location information of license
    Parent objects: 
        Status
        Active
        Allocated
        Available
        Evaluation
        Expired
    Child objects: 
        Location - License information for specific node
    Applicable methods: get_keys, get_entries

    Description: License information for specific node
    Parent objects: 
        LocationTable
    Keys: 
        Node (mandatory)
            Type: NodeID
            Description: Node
    Value: license_request_location
    Applicable methods: get_data

    Description: Secure Domain Router information of license
    Parent objects: 
        Status
        Active
        Allocated
        Available
        Evaluation
        Expired
    Child objects: 
        SDR - License information for specific Secure Domain Router
    Applicable methods: get_keys, get_entries

    Description: License information for specific Secure Domain Router
    Parent objects: 
        SDRTable
    Keys: 
        SDRName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name
    Value: license_request_sdr
    Applicable methods: get_data

    Description: Allocated license information
    Parent objects: 
        Status
    Child objects: 
        FeatureTable - Feature ID information of license
        LocationTable - Location information of license
        SDRTable - Secure Domain Router information of license
    Applicable methods: find_data

    Description: Available license information
    Parent objects: 
        Status
    Child objects: 
        FeatureTable - Feature ID information of license
        LocationTable - Location information of license
        SDRTable - Secure Domain Router information of license
    Applicable methods: find_data

    Description: Evaluation license information
    Parent objects: 
        Status
    Child objects: 
        FeatureTable - Feature ID information of license
        LocationTable - Location information of license
        SDRTable - Secure Domain Router information of license
    Applicable methods: find_data

    Description: Expired license information
    Parent objects: 
        Status
    Child objects: 
        FeatureTable - Feature ID information of license
        LocationTable - Location information of license
        SDRTable - Secure Domain Router information of license
    Applicable methods: find_data

    Description: License operation log
    Parent objects: 
        License
    Child objects: 
        Administration - Administration log information
        Operational - License operational log information
    Applicable methods: find_data

    Description: License operational log information
    Parent objects: 
        Log
    Child objects: 
        FeatureIDTable - Feature ID information of license operation log
        LocationNumberTable - Location information of license operation log
        RequestIDTable - ID information of license operation log
        SDRNameTable - Secure Domain Router information of license operation log
    Applicable methods: find_data

    Description: ID information of license operation log
    Parent objects: 
        Operational
        Administration
    Child objects: 
        RequestID - License log information for specific ID
    Applicable methods: get_keys, get_entries

    Description: License log information for specific ID
    Parent objects: 
        RequestIDTable
    Keys: 
        ID (mandatory)
            Type: Range. Value lies between 1 and 9999
            Description: Request ID
    Value: license_log_req
    Applicable methods: get_data

    Description: Feature ID information of license operation log
    Parent objects: 
        Operational
        Administration
    Child objects: 
        FeatureID - License log information for specific feature
    Applicable methods: get_keys, get_entries

    Description: License log information for specific feature
    Parent objects: 
        FeatureIDTable
    Keys: 
        Feature (mandatory)
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
    Value: license_log_feature
    Applicable methods: get_data

    Description: Location information of license operation log
    Parent objects: 
        Operational
        Administration
    Child objects: 
        LocationNumber - License log information for specific node
    Applicable methods: get_keys, get_entries

    Description: License log information for specific node
    Parent objects: 
        LocationNumberTable
    Keys: 
        Node (mandatory)
            Type: NodeID
            Description: Node
    Value: license_log_location
    Applicable methods: get_data

    Description: Secure Domain Router information of license operation log
    Parent objects: 
        Operational
        Administration
    Child objects: 
        SDRName - License log information for specific SecureDomain Router
    Applicable methods: get_keys, get_entries

    Description: License log information for specific SecureDomain Router
    Parent objects: 
        SDRNameTable
    Keys: 
        SDRName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name
    Value: license_log_sdr
    Applicable methods: get_data

    Description: Administration log information
    Parent objects: 
        Log
    Child objects: 
        FeatureIDTable - Feature ID information of license operation log
        LocationNumberTable - Location information of license operation log
        RequestIDTable - ID information of license operation log
        SDRNameTable - Secure Domain Router information of license operation log
    Applicable methods: find_data

    Description: Unique Device Identifier information
    Parent objects: 
        License
    Child objects: 
        UDIInformation - UDI information on system
    Applicable methods: get_keys, get_entries

    Description: UDI information on system
    Parent objects: 
        UDIInformationTable
    Keys: 
        UDI (mandatory)
            Type: BoundedString. Length less than or equal to 128
            Description: Unique Device Identifier
    Value: license_request_udi
    Applicable methods: get_data

    Description: License backup file information
    Parent objects: 
        License
    Child objects: 
        Backup - License backup file information on system
    Applicable methods: get_keys, get_entries

    Description: License backup file information on system
    Parent objects: 
        BackupTable
    Keys: 
        BackupFile (mandatory)
            Type: BoundedString. Length less than or equal to 1024
            Description: License backup file name
    Value: license_backup_info
    Applicable methods: get_data

    Description: License Pools configuration information
    Parent objects: 
        License
    Child objects: 
        Pool - Pools of configuration information on system
    Applicable methods: get_keys, get_entries

    Description: Pools of configuration information on system
    Parent objects: 
        PoolTable
    Keys: 
        PoolName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Pool Name
    Value: license_pools_info
    Applicable methods: get_data

    Description: Rehost Tickets information
    Parent objects: 
        License
    Child objects: 
        FeatureNameTable - Rehost Tickets of featureID information
        RackIDTable - Rehost Tickets of RackID information
    Applicable methods: find_data

    Description: Rehost Tickets of featureID information
    Parent objects: 
        RehostTickets
    Child objects: 
        FeatureName - Rehost Tickets of the featureID information on system
    Applicable methods: get_keys, get_entries

    Description: Rehost Tickets of the featureID information on system
    Parent objects: 
        FeatureNameTable
    Keys: 
        Feature (mandatory)
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
    Value: rehost_feature_info
    Applicable methods: get_data

    Description: Rehost Tickets of RackID information
    Parent objects: 
        RehostTickets
    Child objects: 
        RackID - Rehost Tickets of the rackID information on system
    Applicable methods: get_keys, get_entries

    Description: Rehost Tickets of the rackID information on system
    Parent objects: 
        RackIDTable
    Keys: 
        Rack (mandatory)
            Type: RackID
            Description: Rack ID
    Value: rehost_rack_info
    Applicable methods: get_data

Perl Data Object Documentation for udp_snmp_cfg, version 7. 3.

Objects

    Description: UDP SNMP heirarchy point
    Parent objects: 
        Configuration
    Child objects: 
        Trap - Class to hold trap queue and trap timeout 
    Applicable methods: find_data, set_data, delete_data

    Description: Class to hold trap queue and trap timeout 
    Parent objects: 
        UDP_SNMP
    Child objects: 
        QueueLength - The number of traps that can be held
        Timeout - Timeout for TRAP message retransmissions
    Applicable methods: find_data, set_data, delete_data

    Description: The number of traps that can be held
    Parent objects: 
        Trap
    Values: 
        QueueLength (mandatory)
            Type: Range. Value lies between 1 and 5000
            Description: Queue length
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Timeout for TRAP message retransmissions
    Parent objects: 
        Trap
    Values: 
        TrapTimeout (mandatory)
            Type: Range. Value lies between 1 and 1000
            Description: Timeout
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for ipv4_igmp_action, version 1. 0.

Objects

    Description: IGMP action data
    Task IDs required: multicast
    Parent objects: 
        Action
    Child objects: 
        Clear - Clears IGMP related information
    Applicable methods: set_data

    Description: Clears IGMP related information
    Parent objects: 
        IGMP
    Child objects: 
        GroupTable - IGMP clear group data
        MRIB - Clear IGMP info from MRIB
        TrafficCounters - Clear IGMP traffic counters
    Applicable methods: set_data

    Description: IGMP clear group data
    Parent objects: 
        Clear
    Child objects: 
        Group - Group to be cleared from IGMP group cache
    Applicable methods: set_data

    Description: Group to be cleared from IGMP group cache
    Parent objects: 
        GroupTable
    Keys: 
        GroupAddress
            Type: IPV4Address
            Description: Group address
        Name
            Type: Interface
            Description: Interface Name
    Values: 
        Clear (mandatory)
            Type: xsd:boolean
            Description: Clear entries for this peer
    Default value: none.
    Applicable methods: set_data

    Description: Clear IGMP info from MRIB
    Parent objects: 
        Clear
    Values: 
        Clear (mandatory)
            Type: xsd:boolean
            Description: Reset connection with MRIB
    Default value: none.
    Applicable methods: set_data

    Description: Clear IGMP traffic counters
    Parent objects: 
        Clear
    Values: 
        Clear (mandatory)
            Type: xsd:boolean
            Description: Clear IGMP traffic counters
    Default value: none.
    Applicable methods: set_data

Perl Data Object Documentation for infra_pakman_oper, version 1. 0.

Objects

    Description: Packet manager infrastructure
    Task IDs required: interface
    Parent objects: 
        Operational
    Child objects: 
        NodeTable - List of packet manager nodes
    Applicable methods: find_data

    Description: List of packet manager nodes
    Parent objects: 
        InfraPacketManager
    Child objects: 
        Node - Packet manager node ID
    Applicable methods: get_keys

    Description: Packet manager node ID
    Parent objects: 
        NodeTable
    Keys: 
        Node (mandatory)
            Type: NodeID
            Description: Node ID
    Child objects: 
        Statistics - Packet statistics
    Applicable methods: find_data

    Description: Packet statistics
    Parent objects: 
        Node
    Value: pak_show_stats
    Applicable methods: get_data

Perl Data Object Documentation for t1e1_cfg, version 1. 0.

Objects

    Description: Configure T1E1 controller configuration
    Task IDs required: sonet-sdh
    Parent objects: 
        InterfaceConfiguration
    Child objects: 
        Bert - Configure T1E1 BERT
        Bits - Specify the National Reserved bits for an E1
        ChannelGroupTable - Configure channel group on T1E1
        ClockSource - Configure t1/e1  TX clock source
        DelayClear - Value of Time in milliseconds
        DelayTrigger - Value of Time in milliseconds
        DwnWhnLooped - Configure t1e1 controller into down-when-looped mode 
        Framing - Configure T1E1 framing
        Linecode - Configure T1E1 linecoding
        Loopback - Configure t1e1 loopback mode
        Service - Configure mode for the port
        T1e1PortCfgFdlAnsi - Enable/Disable FDL
        T1e1PortCfgFdlAtt - Enable/Disable FDL
        YellowDetection - Yellow Alarm detection
        YellowGeneration - Yellow Alarm generation
    Applicable methods: find_data, set_data, delete_data

    Description: Enable/Disable FDL
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        T1e1PortCfgFdlAnsi (mandatory)
            Type: T1E1CfgFdl
            Description: T1 FDL
    Default value: 
        T1e1PortCfgFdlAnsi => disable
    Applicable methods: get_data, set_data, delete_data

    Description: Enable/Disable FDL
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        T1e1PortCfgFdlAtt (mandatory)
            Type: T1E1CfgFdl
            Description: T1 FDL
    Default value: 
        T1e1PortCfgFdlAtt => disable
    Applicable methods: get_data, set_data, delete_data

    Description: Configure T1E1 BERT
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Child objects: 
        Error - Insert errors into BERT bit stream
        Interval - Duration of BERT in minutes
        Pattern - BERT pattern
    Applicable methods: find_data, set_data, delete_data

    Description: Insert errors into BERT bit stream
    Task IDs required: sonet-sdh
    Parent objects: 
        Bert
    Values: 
        ID1 (mandatory)
            Type: Range. Value lies between 1 and 255
            Description: Number of errors to generate (default is 1)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Duration of BERT in minutes
    Task IDs required: sonet-sdh
    Parent objects: 
        Bert
    Values: 
        ID1 (mandatory)
            Type: Range. Value lies between 1 and 1440
            Description: Duration of BERT in minutes
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: BERT pattern
    Task IDs required: sonet-sdh
    Parent objects: 
        Bert
    Values: 
        Pattern (mandatory)
            Type: T1E1BertPattern
            Description: Bert Pattern
    Default value: 
        Pattern => none
    Applicable methods: get_data, set_data, delete_data

    Description: Configure channel group on T1E1
    Parent objects: 
        T1E1
    Child objects: 
        ChannelGroup - channel group number
    Applicable methods: get_keys, set_data, delete_data

    Description: channel group number
    Task IDs required: sonet-sdh
    Parent objects: 
        ChannelGroupTable
    Keys: 
        ID1 (mandatory)
            Type: Range. Value lies between 0 and 31
            Description: channel group number
    Child objects: 
        ChannelGroup_Bert - bert for the channel-group
        Speed - speed of the ds0 channel
        Timeslots - List of timeslots in the channel group
    Applicable methods: find_data, set_data, delete_data

    Description: bert for the channel-group
    Parent objects: 
        ChannelGroup
    Child objects: 
        Interval - Duration of BERT in minutes
        Pattern - BERT pattern
    Applicable methods: find_data, set_data, delete_data

    Description: Duration of BERT in minutes
    Task IDs required: sonet-sdh
    Parent objects: 
        ChannelGroup_Bert
    Values: 
        ID1 (mandatory)
            Type: Range. Value lies between 1 and 1440
            Description: Duration of BERT in minutes
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: BERT pattern
    Task IDs required: sonet-sdh
    Parent objects: 
        ChannelGroup_Bert
    Values: 
        Pattern (mandatory)
            Type: T1E1BertPattern
            Description: Bert Pattern
    Default value: 
        Pattern => none
    Applicable methods: get_data, set_data, delete_data

    Description: speed of the ds0 channel
    Task IDs required: sonet-sdh
    Parent objects: 
        ChannelGroup
    Values: 
        Speed (mandatory)
            Type: T1E1ChSpeed
            Description: DS0 channel speed
    Default value: 
        Speed => 64
    Applicable methods: get_data, set_data, delete_data

    Description: List of timeslots in the channel group
    Task IDs required: sonet-sdh
    Parent objects: 
        ChannelGroup
    Values: 
        ID1 (mandatory)
            Type: xsd:string
            Description: timeslot string seprated by (:) or (-) from 1 to 31. (:) indicates individual timeslot and (-) represent range
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure t1/e1  TX clock source
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        ClockSource (mandatory)
            Type: T1E1ClockSource
            Description: Clock Source
    Default value: 
        ClockSource => internal
    Applicable methods: get_data, set_data, delete_data

    Description: Configure T1E1 framing
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        Framing (mandatory)
            Type: T1E1Framing
            Description: Framing mode
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure T1E1 linecoding
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        Linecode (mandatory)
            Type: T1E1Linecode
            Description: Linecode
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure t1e1 loopback mode
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        Loopback (mandatory)
            Type: xsd:string
            Description: loopback mode:local,remote_line_inband,remote_line_fdl_ansi, remote_line_fdl_bellcore,remote_payload_fdl_ansi,remote_payload_fdl_bellcore,network_linenetwork_payload
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify the National Reserved bits for an E1
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        ID1 (mandatory)
            Type: Range. Value lies between 0 and 31
            Description: pattern: 0-0x1f
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Yellow Alarm detection
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        YellowDetection (mandatory)
            Type: xsd:string
            Description: Yellow Alarm detection:enable,disable
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Yellow Alarm generation
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        YellowGeneration (mandatory)
            Type: xsd:string
            Description: Yellow Alarm generation:enable,disable
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure mode for the port
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        Service (mandatory)
            Type: T1E1ServiceType
            Description: Configure mode for port
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure t1e1 controller into down-when-looped mode 
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        DwnWhnLooped (mandatory)
            Type: T1E1DwnWhnLpedAct
            Description: enabled or disabled 
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Value of Time in milliseconds
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        ID1 (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Value of Time in milliseconds
    Default value: 
        ID1 => 2500
    Applicable methods: get_data, set_data, delete_data

    Description: Value of Time in milliseconds
    Task IDs required: sonet-sdh
    Parent objects: 
        T1E1
    Values: 
        ID1 (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Value of Time in milliseconds
    Default value: 
        ID1 => 10000
    Applicable methods: get_data, set_data, delete_data

    Description: Disable T1/E1 controller processing
    Task IDs required: sonet-sdh
    Parent objects: 
        InterfaceConfiguration
    Values: 
        ID1 (mandatory)
            Type: xsd:boolean
            Description: Enabled or disabled
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'disable' - Disabled
        'enable' - Enabled

    Definition: Enumeration. Valid values are: 
        '0s' - All 0's
        '1s' - All 1's
        '2e15' - 2^15-1 O.151
        '2e20' - 2^20-1 O.153
        '2e23' - 2^23-1 O.151
        'alt-0-1' - Alternating 0's and 1's
        '2e20-QRSS' - 2^20-1 QRSS O.151
        '1in8' - 1 in 8 pattern
        '3in24' - 3 in 24 pattern
        '55Daly' - 55 Daly Pattern
        '55Octet' - 55 Octet Pattern
        '2e11' - 2^11  Pattern
        '2e9' - 2^9  Pattern
        'ds0-1' - ds0-1  Pattern
        'ds0-2' - ds0-2  Pattern
        'ds0-3' - ds0-3  Pattern
        'ds0-4' - ds0-4  Pattern
        'none' - no pattern

    Definition: Enumeration. Valid values are: 
        '64' - 64 Kbits
        '56' - 56 Kbits

    Definition: Enumeration. Valid values are: 
        'line' - clock recovered from line
        'internal' - internal clock

    Definition: Enumeration. Valid values are: 
        'sf' - sf framing mode
        'esf' - esf framing mode(T1 default)
        'no-crc4' - E1
        'crc4' - E1 with CRC(E1 default)
        'unframed' - unframed

    Definition: Enumeration. Valid values are: 
        'b8zs' - B8ZS encoding(T1 default)
        'ami' - AMI encoding(E1 default)
        'hdb3' - HDB3 encoding

    Definition: Enumeration. Valid values are: 
        'atm' - clear channel carrying atm

    Definition: Enumeration. Valid values are: 
        'set' - Activate

    Description: Configuration specific to Console,Use this class if TTYLine class has a naming 'console'
    Task IDs required: tty-access
    Parent objects: 
        TTYLine
    Child objects: 
        Databits - The number of databits.
        FlowControl - TTY Line Flow control.
        Parity - The parity to be used on the line.
        StopBits - The number of stopbits to be used.
    Applicable methods: find_data, set_data, delete_data

    Description: The number of databits.
    Parent objects: 
        RS232
    Values: 
        Databits (mandatory)
            Type: Range. Value lies between 5 and 8
            Description: Number of databits the serial connection should use.
    Default value: 
        Databits => 8
    Applicable methods: get_data, set_data, delete_data

    Description: TTY Line Flow control.
    Parent objects: 
        RS232
    Values: 
        Direction (mandatory)
            Type: TTY_RS232FlowControlDirection
            Description: Direction of the flow control
    Default value: 
        Direction => Default
    Applicable methods: get_data, set_data, delete_data

    Description: The parity to be used on the line.
    Parent objects: 
        RS232
    Values: 
        Type (mandatory)
            Type: TTY_RS232Parity
            Description: Type of parity
    Default value: 
        Type => None
    Applicable methods: get_data, set_data, delete_data

    Description: The number of stopbits to be used.
    Parent objects: 
        RS232
    Values: 
        Stopbits (mandatory)
            Type: TTY_RS232StopBits
            Description: Number of stop bits to be used
    Default value: 
        Stopbits => Two
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'In' - Inbound flow control
        'None' - No flow control
        'Out' - Outbound flow control
        'Default' - Default flow control

    Definition: Enumeration. Valid values are: 
        'Even' - Even parity
        'Mark' - Mark parity
        'None' - No parity
        'Odd' - Odd parity
        'Space' - Space parity

    Definition: Enumeration. Valid values are: 
        'One' - One stopbit
        'Two' - Two stopbits

    Description: MPLS PCE operational data
    Task IDs required: mpls-te
    Parent objects: 
        Operational
    Child objects: 
        NeighborTable - The set of PCE neighbors
        Statistics - PCE stats info
        Topology - The topology information in PCE
        TunnelsSummary - Summary info of PCE tunnels
    Applicable methods: find_data

    Description: The set of PCE neighbors
    Parent objects: 
        MPLS_PCE
    Child objects: 
        Neighbor - The set of PCE neighbors
    Applicable methods: get_keys, get_entries

    Description: The set of PCE neighbors
    Parent objects: 
        NeighborTable
    Keys: 
        NeighborAddress (mandatory)
            Type: IPV4Address
            Description: The neighbor address
    Value: pce_neighbor_bag
    Applicable methods: get_data

    Description: The topology information in PCE
    Parent objects: 
        MPLS_PCE
    Child objects: 
        GlobalInfo - The global information of the overall  topology
    Applicable methods: find_data

    Description: The global information of the overall  topology
    Parent objects: 
        Topology
    Value: pce_topology_global_info_bag
    Applicable methods: get_data

    Description: PCE stats info
    Parent objects: 
        MPLS_PCE
    Value: pce_stats_bag
    Applicable methods: get_data

    Description: Summary info of PCE tunnels
    Parent objects: 
        MPLS_PCE
    Value: pce_tunnels_summary_bag
    Applicable methods: get_data

Perl Data Object Documentation for ipsla_op_stats_ltst_oper, version 4. 2.

Objects

    Description: Statistics collected during the last sampling cycle of the operation
    Parent objects: 
        Statistics
    Child objects: 
        HopTable - Latest statistics for hops in a path-enabled operation
        LPDPathTable - List of latest LPD paths
        Target - Latest statistics for the target node
    Applicable methods: find_data

    Description: Latest statistics for the target node
    Parent objects: 
        Latest
    Value: ipsla_global_stats_bag
    Applicable methods: get_data

    Description: Latest statistics for hops in a path-enabled operation
    Parent objects: 
        Latest
    Child objects: 
        Hop - Latest stats for a hop in a path-enabled operation
    Applicable methods: get_keys, get_entries

    Description: Latest stats for a hop in a path-enabled operation
    Parent objects: 
        HopTable
    Keys: 
        HopIndex (mandatory)
            Type: IPSLAHopIndex
            Description: Hop Index
    Value: ipsla_global_stats_bag
    Applicable methods: get_data

    Description: List of latest LPD paths
    Parent objects: 
        Latest
    Child objects: 
        LPDPath - Latest path statistics of MPLS LSP group operation
    Applicable methods: get_keys, get_entries

    Description: Latest path statistics of MPLS LSP group operation
    Parent objects: 
        LPDPathTable
    Keys: 
        PathIndex (mandatory)
            Type: IPSLA_LPDPathIndex
            Description: LPD path index
    Value: ipsla_lpd_path_stats_bag
    Applicable methods: get_data

Perl Data Object Documentation for snmp_cfg, version 7. 3.

Objects

    Description: The heirarchy point for all the SNMP configurations
    Task IDs required: snmp
    Parent objects: 
        Configuration
    Child objects: 
        Administration - Container class for SNMP administration
        Agent - The heirarchy point for SNMP Agent configurations
        ContextTable - List of Context Names
        Correlator - Configure properties of the trap correlator
        DefaultCommunityMapTable - Container class to hold unencrpted community map
        EncryptedCommunityMapTable - Container class to hold clear/encrypted communitie maps
        GroupTable - Define a User Security Model group
        IPv4 - SNMP TOS bit for outgoing packets
        PacketSize - Largest SNMP packet size
        System - container to hold system information
        Target - SNMP target configurations
        Timeouts - SNMP timeouts
        TrapHostTable - Specify hosts to receive SNMP notifications
        TrapSource - Assign an interface for the source address of all traps
        UserTable - Define a user who can access the SNMP engine
        VRFAuthenticationTrapDisable - Disable authentication traps for packets on a vrf
        VRFTable - SNMP VRF configuration commands
        ViewTable - Class to configure a SNMPv2 MIB view
    Applicable methods: find_data, set_data, delete_data

    Description: SNMP TOS bit for outgoing packets
    Parent objects: 
        SNMP
    Child objects: 
        DSCP - DSCP value
        Precedence - Precedence value
    Applicable methods: find_data, set_data, delete_data

    Description: DSCP value
    Parent objects: 
        IPv4
    Values: 
        Type
            Type: SNMP_DSCP
            Description: SNMP TOS type DSCP
        Value
            Type: SNMP_DSCP_Value
            Description: SNMP DSCP value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Precedence value
    Parent objects: 
        IPv4
    Values: 
        Type
            Type: SNMP_Precedence
            Description: SNMP TOS type Precedence
        Value
            Type: SNMP_Precedence_Value
            Description: SNMP Precedence value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: The heirarchy point for SNMP Agent configurations
    Parent objects: 
        SNMP
    Child objects: 
        EngineID - SNMPv3 engineID
    Applicable methods: find_data, set_data, delete_data

    Description: SNMPv3 engineID
    Parent objects: 
        Agent
    Child objects: 
        Local - engineID of the local agent
    Applicable methods: find_data, set_data, delete_data

    Description: engineID of the local agent
    Parent objects: 
        EngineID
    Values: 
        LocalEngineID (mandatory)
            Type: xsd:string
            Description: engine ID octet string
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Container class for SNMP administration
    Parent objects: 
        SNMP
    Child objects: 
        DefaultCommunityTable - Container class to hold unencrpted communities
        EncryptedCommunityTable - Container class to hold clear/encrypted communities
    Applicable methods: find_data, set_data, delete_data

    Description: Container class to hold unencrpted communities
    Parent objects: 
        Administration
    Child objects: 
        DefaultCommunity - Unencrpted SNMP community string and access priviledges
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Unencrpted SNMP community string and access priviledges
    Parent objects: 
        DefaultCommunityTable
    Keys: 
        CommunityName (mandatory)
            Type: BoundedString. Length less than or equal to 128
            Description: SNMP community string
    Values: 
        Priviledge
            Type: SNMPAccessLevel
            Description: Read/Write Access
        ViewName
            Type: xsd:string
            Description: MIB view to which the community has access
        AccessList
            Type: xsd:string
            Description: Access-list name
        Owner
            Type: SNMPOwnerAccess
            Description: Logical Router or System owner access
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Container class to hold clear/encrypted communities
    Parent objects: 
        Administration
    Child objects: 
        EncryptedCommunity - Clear/encrypted SNMP community string and access priviledges
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Clear/encrypted SNMP community string and access priviledges
    Parent objects: 
        EncryptedCommunityTable
    Keys: 
        CommunityName (mandatory)
            Type: EncryptedString
            Description: SNMP community string
    Values: 
        Priviledge
            Type: SNMPAccessLevel
            Description: Read/Write Access
        ViewName
            Type: xsd:string
            Description: MIB view to which the community has access
        AccessList
            Type: xsd:string
            Description: Access-list name
        Owner
            Type: SNMPOwnerAccess
            Description: Logical Router or System owner access
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Disable authentication traps for packets on a vrf
    Parent objects: 
        SNMP
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: disabled to be set as TRUE
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Container class to hold unencrpted community map
    Parent objects: 
        SNMP
    Child objects: 
        DefaultCommunityMap - Unencrpted SNMP community map name 
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Unencrpted SNMP community map name 
    Parent objects: 
        DefaultCommunityMapTable
    Keys: 
        CommunityName (mandatory)
            Type: BoundedString. Length less than or equal to 128
            Description: SNMP community map
    Values: 
        Context
            Type: xsd:string
            Description: SNMP Context Name 
        Security
            Type: xsd:string
            Description: SNMP Security Name 
        TargetList
            Type: xsd:string
            Description: target list name 
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Container class to hold clear/encrypted communitie maps
    Parent objects: 
        SNMP
    Child objects: 
        EncryptedCommunityMap - Clear/encrypted SNMP community map
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Clear/encrypted SNMP community map
    Parent objects: 
        EncryptedCommunityMapTable
    Keys: 
        CommunityName (mandatory)
            Type: EncryptedString
            Description: SNMP community map
    Values: 
        Context
            Type: xsd:string
            Description: SNMP Context Name 
        Security
            Type: xsd:string
            Description: SNMP Security Name 
        TargetList
            Type: xsd:string
            Description: target list name 
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: container to hold system information
    Parent objects: 
        SNMP
    Child objects: 
        ChassisID - String to uniquely identify this chassis
        Contact - Text for mib Object sysContact
        Location - Text for mib Object sysLocation
    Applicable methods: find_data, set_data, delete_data

    Description: String to uniquely identify this chassis
    Parent objects: 
        System
    Values: 
        ChassisId (mandatory)
            Type: BoundedString. Length less than or equal to 255
            Description: Chassis ID
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Text for mib Object sysContact
    Parent objects: 
        System
    Values: 
        SystemContact (mandatory)
            Type: BoundedString. Length less than or equal to 255
            Description: identification of the contact person for this managed node
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Text for mib Object sysLocation
    Parent objects: 
        System
    Values: 
        SystemLocation (mandatory)
            Type: BoundedString. Length less than or equal to 255
            Description: The physical location of this node
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Define a User Security Model group
    Parent objects: 
        SNMP
    Child objects: 
        Group - Name of the group
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Name of the group
    Parent objects: 
        GroupTable
    Keys: 
        Name (mandatory)
            Type: BoundedString. Length less than or equal to 128
            Description: Name of the group
    Values: 
        SNMPVersion (mandatory)
            Type: GroupSNMPVersion
            Description: snmp version
        SecurityModel
            Type: SNMPSecurityModel
            Description: security model like auth/noAuth/Priv applicable for v3
        NotifyView
            Type: xsd:string
            Description: notify view name
        ReadView
            Type: xsd:string
            Description: read view name
        WriteView
            Type: xsd:string
            Description: write view name
        AccessList
            Type: xsd:string
            Description: Access-list name
        ContextName
            Type: xsd:string
            Description: Context name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify hosts to receive SNMP notifications
    Parent objects: 
        SNMP
        VRF
    Child objects: 
        TrapHost - Specify hosts to receive SNMP notifications
    Applicable methods: get_keys, set_data, delete_data

    Description: Specify hosts to receive SNMP notifications
    Parent objects: 
        TrapHostTable
    Keys: 
        IPAddress (mandatory)
            Type: IPV4Address
            Description: IP address of SNMP notification host
    Child objects: 
        DefaultUserCommunityTable - Container class for defining communities for a trap host
        EncryptedUserCommunityTable - Container class for defining Clear/encrypt communities for a trap host
    Applicable methods: find_data, set_data, delete_data

    Description: Container class for defining communities for a trap host
    Parent objects: 
        TrapHost
    Child objects: 
        DefaultUserCommunity - Unencrpted Community name associated with a trap host
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Unencrpted Community name associated with a trap host
    Parent objects: 
        DefaultUserCommunityTable
    Keys: 
        CommunityName (mandatory)
            Type: BoundedString. Length less than or equal to 128
            Description: SNMPv1/v2c community string or SNMPv3 user
    Values: 
        Port
            Type: Range. Value lies between 1 and 65535
            Description: udp port number
        Version (mandatory)
            Type: xsd:string
            Description: SNMP Version to be used v1/v2c/v3
        SecurityLevel
            Type: SNMPSecurityModel
            Description: Security level to be used noauth/auth/priv
        BasicTrapTypes (mandatory)
            Type: xsd:unsignedInt
            Description: Number to signify the feature traps that needs to be setBasicTrapTypes is used for all traps except copy-completeSet this value to an integer corresponding to the trapBGP 8192, CONFIG 4096,SYSLOG 131072,SNMP_TRAP 1COPY_COMPLETE_TRAP 64To provide a combination of trap Add the respective numbersValue must be set to 0 for all traps
        AdvancedTrapTypes1 (mandatory)
            Type: xsd:unsignedInt
            Description: Number to signify the feature traps that needs to be setUse this for providing copy-complete trapValue must be set to 0 if not used
        AdvancedTrapTypes2 (mandatory)
            Type: xsd:unsignedInt
            Description: Number to signify the feature traps that needs to be setvalue should always to set as 0
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Container class for defining Clear/encrypt communities for a trap host
    Parent objects: 
        TrapHost
    Child objects: 
        EncryptedUserCommunity - Clear/Encrypt Community name associated with a trap host
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Clear/Encrypt Community name associated with a trap host
    Parent objects: 
        EncryptedUserCommunityTable
    Keys: 
        CommunityName (mandatory)
            Type: EncryptedString
            Description: SNMPv1/v2c community string or SNMPv3 user
    Values: 
        Port
            Type: Range. Value lies between 1 and 65535
            Description: udp port number
        Version (mandatory)
            Type: xsd:string
            Description: SNMP Version to be used v1/v2c/v3
        SecurityLevel
            Type: SNMPSecurityModel
            Description: Security level to be used noauth/auth/priv
        BasicTrapTypes (mandatory)
            Type: xsd:unsignedInt
            Description: Number to signify the feature traps that needs to be setBasicTrapTypes is used for all traps except copy-completeSet this value to an integer corresponding to the trapBGP 8192, CONFIG 4096,SYSLOG 131072,SNMP_TRAP 1COPY_COMPLETE_TRAP 64To provide a combination of trap Add the respective numbersValue must be set to 0 for all traps
        AdvancedTrapTypes1 (mandatory)
            Type: xsd:unsignedInt
            Description: Number to signify the feature traps that needs to be setUse this for providing copy-complete trapValue must be set to 0 if not used
        AdvancedTrapTypes2 (mandatory)
            Type: xsd:unsignedInt
            Description: Number to signify the feature traps that needs to be setvalue should always to set as 0
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Largest SNMP packet size
    Parent objects: 
        SNMP
    Values: 
        Size (mandatory)
            Type: Range. Value lies between 484 and 65500
            Description: Packet size
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Assign an interface for the source address of all traps
    Parent objects: 
        SNMP
    Values: 
        IFName (mandatory)
            Type: Interface
            Description: Interface name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Define a user who can access the SNMP engine
    Parent objects: 
        SNMP
    Child objects: 
        User - Name of the user
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Name of the user
    Parent objects: 
        UserTable
    Keys: 
        UserName (mandatory)
            Type: xsd:string
            Description: Name of the user
    Values: 
        GroupName (mandatory)
            Type: xsd:string
            Description: Group to which the user belongs
        Version (mandatory)
            Type: UserSNMPVersion
            Description: SNMP version to be used. v1,v2c or v3
        AuthenticationPasswordConfigured
            Type: xsd:boolean
            Description: Flag to indicate that authentication password is configred for version 3
        Algorithm
            Type: SNMPHashAlgorithm
            Description: The algorithm used md5 or sha
        AuthenticationPassword
            Type: ProprietaryPassword
            Description: The authentication password
        PrivacyPasswordConfigured
            Type: xsd:boolean
            Description: Flag to indicate that the privacy password is configured for version 3
        PrivacyPassword
            Type: ProprietaryPassword
            Description: The privacy password
        ACLName
            Type: xsd:string
            Description: Access-list name
        Owner
            Type: SNMPOwnerAccess
            Description: The system access either SDROwner or SystemOwner
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Class to configure a SNMPv2 MIB view
    Parent objects: 
        SNMP
    Child objects: 
        View - Name of the view
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Name of the view
    Parent objects: 
        ViewTable
    Keys: 
        ViewName
            Type: xsd:string
            Description: Name of the view
        Family
            Type: xsd:string
            Description: MIB view family name
    Values: 
        ViewInclusion (mandatory)
            Type: SNMP_MIBViewInclusion
            Description: MIB view to be included or excluded
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: SNMP target configurations
    Parent objects: 
        SNMP
    Child objects: 
        TargetListTable - List of targets
    Applicable methods: find_data, set_data, delete_data

    Description: List of targets
    Parent objects: 
        Target
    Child objects: 
        TargetList - Name of the target list
    Applicable methods: get_keys, set_data, delete_data

    Description: Name of the target list
    Parent objects: 
        TargetListTable
    Keys: 
        TargetListName (mandatory)
            Type: xsd:string
            Description: Name of the target list
    Child objects: 
        TargetAddressTable - SNMP Target address configurations
        VRFNameTable - List of VRF Name for a target list
    Applicable methods: find_data, set_data, delete_data

    Description: SNMP Target address configurations
    Parent objects: 
        TargetList
    Child objects: 
        TargetAddress - IP Address to be configured for the Target
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: IP Address to be configured for the Target
    Parent objects: 
        TargetAddressTable
    Keys: 
        IPAddress (mandatory)
            Type: IPV4Address
            Description: IPv4 address
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enable to be set as TRUE to configure an address
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: List of VRF Name for a target list
    Parent objects: 
        TargetList
    Child objects: 
        VRFName - VRF name of the target
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: VRF name of the target
    Parent objects: 
        VRFNameTable
    Keys: 
        Name (mandatory)
            Type: xsd:string
            Description: VRF Name
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enable to be set as TRUE to configure a VRF
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: SNMP VRF configuration commands
    Parent objects: 
        SNMP
    Child objects: 
        VRF - VRF name
    Applicable methods: get_keys, set_data, delete_data

    Description: VRF name
    Parent objects: 
        VRFTable
    Keys: 
        Name (mandatory)
            Type: xsd:string
            Description: VRF name
    Child objects: 
        ContextTable - List of Context Names
        TrapHostTable - Specify hosts to receive SNMP notifications
    Applicable methods: find_data, set_data, delete_data

    Description: List of Context Names
    Parent objects: 
        SNMP
        VRF
    Child objects: 
        Context - Context Name
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Context Name
    Parent objects: 
        ContextTable
    Keys: 
        ContextName (mandatory)
            Type: xsd:string
            Description: Context Name
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enable to be set as TRUE to create the context
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: SNMP timeouts
    Parent objects: 
        SNMP
    Child objects: 
        Subagent - Sub-Agent Request timeout
    Applicable methods: find_data, set_data, delete_data

    Description: Sub-Agent Request timeout
    Parent objects: 
        Timeouts
    Values: 
        timeouts (mandatory)
            Type: Range. Value lies between 1 and 20
            Description: timeout in secs
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'Included' - MIB View to be included
        'Excluded' - MIB View to be excluded

    Definition: Enumeration. Valid values are: 
        'DSCP' - SNMP TOS type DSCP

    Definition: Enumeration. Valid values are: 
        'Precedence' - SNMP TOS type Precedence

    Definition: Range with Enumeration. Values must lie between 0 and 63 with well-known values being:
        'Default' - Applicable to DSCP: bits 000000
        'AF11' - Applicable to DSCP: bits 001010
        'AF12' - Applicable to DSCP: bits 001100
        'AF13' - Applicable to DSCP: bits 001110
        'AF21' - Applicable to DSCP: bits 010010
        'AF22' - Applicable to DSCP: bits 010100
        'AF23' - Applicable to DSCP: bits 010110
        'AF31' - Applicable to DSCP: bits 011010
        'AF32' - Applicable to DSCP: bits 011100
        'AF33' - Applicable to DSCP: bits 011110
        'AF41' - Applicable to DSCP: bits 100010
        'AF42' - Applicable to DSCP: bits 100100
        'AF43' - Applicable to DSCP: bits 100110
        'EF' - Applicable to DSCP: bits 101110
        'CS1' - Applicable to DSCP: bits 001000
        'CS2' - Applicable to DSCP: bits 010000
        'CS3' - Applicable to DSCP: bits 011000
        'CS4' - Applicable to DSCP: bits 100000
        'CS5' - Applicable to DSCP: bits 101000
        'CS6' - Applicable to DSCP: bits 110000
        'CS7' - Applicable to DSCP: bits 111000

    Definition: Range with Enumeration. Values must lie between 0 and 7 with well-known values being:
        'Routine' - Applicable to Precedence: value 0
        'Priority' - Applicable to Precedence: value 1
        'Immediate' - Applicable to Precedence: value 2
        'Flash' - Applicable to Precedence: value 3
        'Flash-override' - Applicable to Precedence: value 4
        'Critical' - Applicable to Precedence: value 5
        'Internet' - Applicable to Precedence: value 6
        'Network' - Applicable to Precedence: value 7

    Definition: Enumeration. Valid values are: 
        'ReadOnly' - Read Only Access for a community string
        'ReadWrite' - Read Write Access for a community string

    Definition: Enumeration. Valid values are: 
        'SDROwner' - Secure Domain Router Owner permissions
        'SystemOwner' - System owner permissions

    Definition: Enumeration. Valid values are: 
        'V1' - SNMP version 1
        'V2C' - SNMP version 2
        'V3' - SNMP version 3

    Definition: Enumeration. Valid values are: 
        'V1' - SNMP version 1
        'V2C' - SNMP version 2
        'V3' - SNMP version 3

    Definition: Enumeration. Valid values are: 
        'NoAuthentication' - No Authentication required
        'Authentication' - Authentication password alone required for access
        'Privacy' - Authentication and privacy password required for access

    Definition: Enumeration. Valid values are: 
        'None' - No authentication required
        'MD5' - Standard Message Digest algorithm
        'SHA' - SHA algorithm

    Description: ATM ILMI operational data
    Task IDs required: atm
    Parent objects: 
        Operational
    Child objects: 
        NodeTable - Contains all the nodes
    Applicable methods: find_data

    Description: Contains all the nodes
    Parent objects: 
        ATM_ILMI
    Child objects: 
        Node - The node on which ATM Interfaces are located
    Applicable methods: get_keys

    Description: The node on which ATM Interfaces are located
    Parent objects: 
        NodeTable
    Keys: 
        node (mandatory)
            Type: NodeID
            Description: The node id
    Child objects: 
        InterfaceTable - Contains ATM Interface ILMI information for node
    Applicable methods: find_data

    Description: Contains ATM Interface ILMI information for node
    Parent objects: 
        Node
    Child objects: 
        InterfaceName - ATM Interface name
    Applicable methods: get_keys, get_entries

    Description: ATM Interface name
    Parent objects: 
        InterfaceTable
    Keys: 
        Interface (mandatory)
            Type: Interface
            Description: The name of the interface
    Value: atm_ilmi_if_config
    Applicable methods: get_data

Perl Data Object Documentation for sonet_local_oper, version 1. 4.

Objects

    Description: SONET operational data
    Task IDs required: sonet-sdh
    Parent objects: 
        Operational
    Child objects: 
        PortTable - All SONET Port operational data
    Applicable methods: find_data

    Description: All SONET Port operational data
    Parent objects: 
        SONET
    Child objects: 
        Port - SONET Port operational data
    Applicable methods: get_keys

    Description: SONET Port operational data
    Parent objects: 
        PortTable
    Keys: 
        Name (mandatory)
            Type: Interface
            Description: Port name
    Child objects: 
        Info - SONET port operational data
    Applicable methods: find_data

    Description: SONET port operational data
    Parent objects: 
        Port
    Value: sonet_port_info
    Applicable methods: get_data

Perl Data Object Documentation for lib_keychain_cfg, version 4. 0.

Objects

    Description: Configure a Key Chain
    Task IDs required: system
    Parent objects: 
        Configuration
    Child objects: 
        Keychain - Name of the key chain
    Applicable methods: get_keys, set_data, delete_data

    Description: Name of the key chain
    Parent objects: 
        KeychainTable
    Keys: 
        ChainName (mandatory)
            Type: xsd:string
            Description: Name of the key chain
    Child objects: 
        AcceptTolerance - Accept Tolerance in seconds or infinite
        KeyTable - Configure a Key
    Applicable methods: find_data, set_data, delete_data

    Description: Accept Tolerance in seconds or infinite
    Task IDs required: system
    Parent objects: 
        Keychain
    Values: 
        Value
            Type: Range. Value lies between 1 and 8640000
            Description: Value in seconds
        Infinite
            Type: xsd:boolean
            Description: Infinite tolerance
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure a Key
    Task IDs required: system
    Parent objects: 
        Keychain
    Child objects: 
        Key - Key Identifier
    Applicable methods: get_keys, set_data, delete_data

    Description: Key Identifier
    Task IDs required: system
    Parent objects: 
        KeyTable
    Keys: 
        KeyID (mandatory)
            Type: xsd:string
            Description: 48-bit Key identifier
    Child objects: 
        AcceptLifetime - Configure a key Acceptance Lifetime
        CryptographicAlgorithm - Configure the cryptographic algorithm
        KeyString - Configure a clear text/encrypted Key string 
        SendLifetime - Configure a Send Lifetime
    Applicable methods: find_data, set_data, delete_data

    Description: Configure the cryptographic algorithm
    Task IDs required: system
    Parent objects: 
        Key
    Values: 
        CryptographicAlgorithm (mandatory)
            Type: CryptoAlgType
            Description: Cryptographic Algorithm
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure a key Acceptance Lifetime
    Task IDs required: system
    Parent objects: 
        Key
    Values: 
        StartHour
            Type: Range. Value lies between 0 and 23
            Description: Start Hour
        StartMinutes
            Type: Range. Value lies between 0 and 59
            Description: Start Minutes
        StartSeconds
            Type: Range. Value lies between 0 and 59
            Description: Start Seconds
        StartDate
            Type: Range. Value lies between 1 and 31
            Description: Start Date
        StartMonth
            Type: KeyChainMonthType
            Description: Start Month
        StartYear
            Type: Range. Value lies between 1993 and 2035
            Description: Start Year
        LifeTime
            Type: Range. Value lies between 1 and 2147483647
            Description: Lifetime duration in seconds
        InfiniteFlag
            Type: xsd:boolean
            Description: Infinite Lifetime flag
        EndHour
            Type: Range. Value lies between 0 and 23
            Description: End Hour
        EndMinutes
            Type: Range. Value lies between 0 and 59
            Description: End Minutes
        EndSeconds
            Type: Range. Value lies between 0 and 59
            Description: End Seconds
        EndDate
            Type: Range. Value lies between 1 and 31
            Description: End Date
        EndMonth
            Type: KeyChainMonthType
            Description: End Month
        EndYear
            Type: Range. Value lies between 1993 and 2035
            Description: End Year
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure a clear text/encrypted Key string 
    Task IDs required: system
    Parent objects: 
        Key
    Values: 
        KeyString (mandatory)
            Type: ProprietaryPassword
            Description: Key String
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure a Send Lifetime
    Task IDs required: system
    Parent objects: 
        Key
    Values: 
        StartHour
            Type: Range. Value lies between 0 and 23
            Description: Start Hour
        StartMinutes
            Type: Range. Value lies between 0 and 59
            Description: Start Minutes
        StartSeconds
            Type: Range. Value lies between 0 and 59
            Description: Start Seconds
        StartDate
            Type: Range. Value lies between 1 and 31
            Description: Start Date
        StartMonth
            Type: KeyChainMonthType
            Description: Start Month
        StartYear
            Type: Range. Value lies between 1993 and 2035
            Description: Start Year
        LifeTime
            Type: Range. Value lies between 1 and 2147483647
            Description: Lifetime duration in seconds
        InfiniteFlag
            Type: xsd:boolean
            Description: Infinite Lifetime flag
        EndHour
            Type: Range. Value lies between 0 and 23
            Description: End Hour
        EndMinutes
            Type: Range. Value lies between 0 and 59
            Description: End Minutes
        EndSeconds
            Type: Range. Value lies between 0 and 59
            Description: End Seconds
        EndDate
            Type: Range. Value lies between 1 and 31
            Description: End Date
        EndMonth
            Type: KeyChainMonthType
            Description: End Month
        EndYear
            Type: Range. Value lies between 1993 and 2035
            Description: End Year
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'JAN' - January
        'FEB' - February
        'MAR' - March
        'APR' - April
        'MAY' - May
        'JUN' - June
        'JUL' - July
        'AUG' - August
        'SEP' - September
        'OCT' - October
        'NOV' - November
        'DEC' - December

    Definition: Enumeration. Valid values are: 
        'ALG_HMAC_SHA1_12' - HMAC-SHA-1-12
        'ALG_MD5_16' - MD5-16
        'ALG_SHA1_20' - SHA-1-20
        'ALG_HMAC_MD5_16' - HMAC-MD5-16
        'ALG_HMAC_SHA1_20' - HMAC-SHA-1-20

    Description: Information of license operations
    Task IDs required: sysmgr
    Parent objects: 
        AdminAction
    Child objects: 
        AddTable - Execute license add information
        BackupTable - Execute license backup information
        Clear - Clear all the installed license
        Move - Execute license move information
        Pool - License pool action information
        Remove - License remove action information
        RestoreTable - Execute license restore information
    Applicable methods: set_data

    Description: Execute license add information
    Parent objects: 
        License
    Child objects: 
        Add - Execute license add
    Applicable methods: set_data

    Description: Execute license add
    Parent objects: 
        AddTable
    Keys: 
        SDRName
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name of adding licenses
        LicenseFile
            Type: xsd:string
            Description: Add license file path
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license add
    Default value: none.
    Applicable methods: set_data

    Description: Execute license move information
    Parent objects: 
        License
    Child objects: 
        SDRTable - Execute license move for SDR information
        Slot - Execute license move slot information
    Applicable methods: set_data

    Description: Execute license move for SDR information
    Parent objects: 
        Move
    Child objects: 
        SDR - Execute license move for SDR
    Applicable methods: set_data

    Description: Execute license move for SDR
    Parent objects: 
        SDRTable
    Keys: 
        Feature
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
        LicenseCount
            Type: Range. Value lies between 1 and 1024
            Description: Number of licenses to move (1024 is equivalent to the 'all' option)
        FromSDRName
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name of moving licenses
        ToSDRName
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name of putting licenses
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license move
    Default value: none.
    Applicable methods: set_data

    Description: Execute license move slot information
    Parent objects: 
        Move
    Child objects: 
        LocationTable - Location information of license remove
        StatusTable - Execute license move the status from allocated to available
    Applicable methods: set_data

    Description: Location information of license remove
    Parent objects: 
        Slot
    Child objects: 
        Location - Execute license move slot for location
    Applicable methods: set_data

    Description: Execute license move slot for location
    Parent objects: 
        LocationTable
    Keys: 
        Feature
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
        LicenseCount
            Type: Range. Value lies between 1 and 1024
            Description: Number of licenses to move
        FromNode
            Type: NodeID
            Description: NodeID of moving licenses
        ToNode
            Type: NodeID
            Description: NodeID of putting licenses
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license move slot for location
    Default value: none.
    Applicable methods: set_data

    Description: Execute license move the status from allocated to available
    Parent objects: 
        Slot
    Child objects: 
        Status - Execute license move slot from allocated to available
    Applicable methods: set_data

    Description: Execute license move slot from allocated to available
    Parent objects: 
        StatusTable
    Keys: 
        Feature (mandatory)
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license move slot for the status
    Default value: none.
    Applicable methods: set_data

    Description: License remove action information
    Parent objects: 
        License
    Child objects: 
        LicenseIDTable - Execute license remove information
        TicketTable - Execute license remove information
    Applicable methods: set_data

    Description: Execute license remove information
    Parent objects: 
        Remove
    Child objects: 
        LicenseID - Execute license remove with licenseID
    Applicable methods: set_data

    Description: Execute license remove with licenseID
    Parent objects: 
        LicenseIDTable
    Keys: 
        Feature
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
        LicenseID
            Type: BoundedString. Length less than or equal to 256
            Description: License ID
        SDRName
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name of removing licenses
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license remove with license ID
    Default value: none.
    Applicable methods: set_data

    Description: Execute license remove information
    Parent objects: 
        Remove
    Child objects: 
        Ticket - Execute license remove with the permission tickets
    Applicable methods: set_data

    Description: Execute license remove with the permission tickets
    Parent objects: 
        TicketTable
    Keys: 
        Feature
            Type: BoundedString. Length less than or equal to 31
            Description: Feature ID
        PermissionFile
            Type: BoundedString. Length less than or equal to 1024
            Description: Permission file path
        RehostFile
            Type: BoundedString. Length less than or equal to 1024
            Description: Rehost file path
        SDRName
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name of removing licenses
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license remove with ticket
    Default value: none.
    Applicable methods: set_data

    Description: Execute license backup information
    Parent objects: 
        License
    Child objects: 
        Backup - Execute license backup
    Applicable methods: set_data

    Description: Execute license backup
    Parent objects: 
        BackupTable
    Keys: 
        BackupFile (mandatory)
            Type: xsd:string
            Description: Backup license file path
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license backup
    Default value: none.
    Applicable methods: set_data

    Description: Execute license restore information
    Parent objects: 
        License
    Child objects: 
        Restore - Execute license restore
    Applicable methods: set_data

    Description: Execute license restore
    Parent objects: 
        RestoreTable
    Keys: 
        RestoreFile (mandatory)
            Type: xsd:string
            Description: Restore license file path
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license restore
    Default value: none.
    Applicable methods: set_data

    Description: License pool action information
    Parent objects: 
        License
    Child objects: 
        CreateSDRTable - Execute license pool create information
        RemoveSDRTable - Execute license pool remove information
    Applicable methods: set_data

    Description: Execute license pool create information
    Parent objects: 
        Pool
    Child objects: 
        CreateSDR - Execute license pool create
    Applicable methods: set_data

    Description: Execute license pool create
    Parent objects: 
        CreateSDRTable
    Keys: 
        SDRName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name of creating a pool
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license pool create
    Default value: none.
    Applicable methods: set_data

    Description: Execute license pool remove information
    Parent objects: 
        Pool
    Child objects: 
        RemoveSDR - Execute license remove
    Applicable methods: set_data

    Description: Execute license remove
    Parent objects: 
        RemoveSDRTable
    Keys: 
        SDRName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: SDR Name of removing a pool
    Values: 
        Exec (mandatory)
            Type: xsd:boolean
            Description: Execute license pool remove
    Default value: none.
    Applicable methods: set_data

    Description: Clear all the installed license
    Parent objects: 
        License
    Values: 
        Clear (mandatory)
            Type: xsd:boolean
            Description: Clear all the installed license
    Default value: none.
    Applicable methods: set_data

Perl Data Object Documentation for ip_rsvp_prefix_filtering_cfg, version 3. 2.

Objects

    Description: Configure prefix filtering parameters
    Parent objects: 
        Signalling
    Child objects: 
        ACL - Configure an ACL to perform prefix filtering of RSVP Router Alert messages
        DefaultDenyAction - Configure RSVP behaviour for scenarios where ACL match yields a default (implicit) deny
    Applicable methods: find_data, set_data, delete_data

    Description: Configure an ACL to perform prefix filtering of RSVP Router Alert messages
    Parent objects: 
        PrefixFiltering
    Values: 
        PrefixFilteringACL (mandatory)
            Type: BoundedString. Length less than or equal to 33
            Description: Name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure RSVP behaviour for scenarios where ACL match yields a default (implicit) deny
    Parent objects: 
        PrefixFiltering
    Child objects: 
        Drop - Drop packets when ACL match yields a default (implicit) deny
    Applicable methods: find_data, set_data, delete_data

    Description: Drop packets when ACL match yields a default (implicit) deny
    Parent objects: 
        DefaultDenyAction
    Values: 
        DefaultDenyAction (mandatory)
            Type: xsd:boolean
            Description: Configure RSVP to drop packets when ACL match yields a default (implicit) deny
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for mpls_io_cfg, version 1. 0.

Objects

    Description: MPLS configuration under an interface
    Task IDs required: mpls-te or mpls-ldp or mpls-static
    Parent objects: 
        InterfaceConfiguration
    Child objects: 
        MTU - Set the MPLS MTU for the interface
    Applicable methods: find_data, set_data, delete_data

    Description: Set the MPLS MTU for the interface
    Parent objects: 
        MPLS
    Values: 
        Size (mandatory)
            Type: Range. Value lies between 68 and 65535
            Description: MTU size in bytes
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for ip_tcp_cfg, version 1. 0.

Objects

    Description: Global IP TCP configuration
    Task IDs required: transport
    Parent objects: 
        Configuration
    Child objects: 
        MaximumSegmentSize - TCP initial maximum segment size
        PathMTUDiscovery - Aging time (in minutes)
        SelectiveAck - TCP selective-ACK
        SynWaitTime - Time to wait on new TCP connections in seconds
        Timestamp - TCP timestamp option
        WindowSize - TCP receive window size (bytes)
    Applicable methods: find_data, set_data, delete_data

    Description: TCP initial maximum segment size
    Parent objects: 
        IP_TCP
    Values: 
        SegmentSize (mandatory)
            Type: Range. Value lies between 68 and 10000
            Description: TCP initial maximum segment size
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Aging time (in minutes)
    Parent objects: 
        IP_TCP
    Values: 
        AgingTime (mandatory)
            Type: xsd:unsignedInt
            Description: Aging time; 0 for infinite, and range be (10,30) 
    Default value: 
        AgingTime => 10
    Applicable methods: get_data, set_data, delete_data

    Description: TCP selective-ACK
    Parent objects: 
        IP_TCP
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enable TCP selective-ACK
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Time to wait on new TCP connections in seconds
    Parent objects: 
        IP_TCP
    Values: 
        SynWait (mandatory)
            Type: Range. Value lies between 5 and 30
            Description: Wait time
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: TCP timestamp option
    Parent objects: 
        IP_TCP
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enable TCP timestamp option
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: TCP receive window size (bytes)
    Parent objects: 
        IP_TCP
    Values: 
        WindowSize (mandatory)
            Type: Range. Value lies between 2048 and 65535
            Description: Window size
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for mda_common_cfg, version 1. 1.

Objects

    Description: Per-node configuration for active nodes
    Parent objects: 
        Configuration
    Child objects: 
        ActiveNode - The configuration for an active node
    Applicable methods: get_keys, set_data, delete_data

    Description: The configuration for an active node
    Parent objects: 
        ActiveNodeTable
    Keys: 
        NodeID (mandatory)
            Type: NodeID
            Description: The identifier for this node
    Applicable methods: find_data, set_data, delete_data

    Description: Per-node configuration for non-active nodes
    Parent objects: 
        Configuration
    Child objects: 
        PreconfiguredNode - The configuration for a non-active node
    Applicable methods: get_keys, set_data, delete_data

    Description: The configuration for a non-active node
    Parent objects: 
        PreconfiguredNodeTable
    Keys: 
        NodeID (mandatory)
            Type: NodeID
            Description: The identifier for this node
    Applicable methods: find_data, set_data, delete_data

Perl Data Object Documentation for ipsla_op_def_udp_echo_cfg, version 7. 2.

Objects

    Description: UDPEcho Operation type
    Parent objects: 
        OperationType
    Child objects: 
        ControlDisable - Disable control packets
        Create - Create operation with specified type
        DataSize - Protocol data size in payload of probe packets
        DestAddress - IPv4 address of the target device
        DestPort - Port number on target device
        EnhancedStatsTable - Table of statistics collection intervals
        Frequency - Frequency of the probing
        History - Configure the history parameters for this operation
        SourceAddress - IPv4 address of the source device
        SourcePort - Port number on source device
        Statistics - Statistics collection aggregated over an hour
        Tag - Add a tag for this operation
        Timeout - Probe/Control timeout interval
        Tos - Type of service setting in probe packet
        VRF - Configure IPSLA for a VPN Routing/Forwarding instance)
        VerifyData - Check each IPSLA response for corruption
    Applicable methods: find_data, set_data, delete_data

    Description: Protocol data size in payload of probe packets
    Parent objects: 
        UDPEcho
    Child objects: 
        Request - Payload size in request probe packet
    Applicable methods: find_data, set_data, delete_data

    Description: Payload size in request probe packet
    Parent objects: 
        DataSize
    Values: 
        RequestDataSize (mandatory)
            Type: Range. Value lies between 4 and 1500
            Description: Request data size in bytes
    Default value: 
        RequestDataSize => 16
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for tty_management_cfg, version 1. 1.

Objects

    Description: Management connection configuration
    Task IDs required: tty-access
    Parent objects: 
        TTYLine
    Child objects: 
        ACLIn - ACL to filter ingoing connections
        ACLOut - ACL to filter outgoing connections
        CLIWhiteSpaceCompletion - Command completion on whitespace
        DisconnectCharacter - The line disconnect character
        EscapeCharacter - Line template's escape character
        SessionLimit - The number of outgoing connections
        SessionTimeout - Interval for closing connection when there is no input traffic
        TransportInput - Protocols to use when connecting to the terminal server
        TransportOutput - Protocols to use for outgoing connections
        TransportPreferred - The preferred protocol to use
    Applicable methods: find_data, set_data, delete_data

    Description: ACL to filter ingoing connections
    Parent objects: 
        Connection
    Values: 
        ACLName (mandatory)
            Type: xsd:string
            Description: IP access list name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: ACL to filter outgoing connections
    Parent objects: 
        Connection
    Values: 
        ACLName (mandatory)
            Type: xsd:string
            Description: IP access list name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: The line disconnect character
    Parent objects: 
        Connection
    Values: 
        Character (mandatory)
            Type: CharNum
            Description: Disconnect character's decimal equivalent value or Character 
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Line template's escape character
    Parent objects: 
        Connection
    Values: 
        TTYEscape (mandatory)
            Type: TTYEscapeCharNum
            Description: Escape character or ASCII decimal equivalent value orspecial strings NONE,DEFAULT,BREAK
    Default value: 
        TTYEscape => 30
    Applicable methods: get_data, set_data, delete_data

    Description: Command completion on whitespace
    Parent objects: 
        Connection
    Values: 
        Enabled (mandatory)
            Type: xsd:boolean
            Description: True to enable
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: The number of outgoing connections
    Parent objects: 
        Connection
    Values: 
        Connections (mandatory)
            Type: Range. Value lies between 0 and 20
            Description: Number of outgoing connections
    Default value: 
        Connections => 6
    Applicable methods: get_data, set_data, delete_data

    Description: Interval for closing connection when there is no input traffic
    Parent objects: 
        Connection
    Values: 
        Timeout (mandatory)
            Type: Range. Value lies between 0 and 35791
            Description: Session timeout interval in minutes
        Direction (mandatory)
            Type: TTYSessionTimeoutDirection
            Description: Include output traffic as well as input traffic
    Default value: 
        Timeout => 10
        Direction => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Protocols to use when connecting to the terminal server
    Parent objects: 
        Connection
    Values: 
        Select
            Type: TTYTransportProtocolSelect
            Description: Choose transport protocols
        Protocol1
            Type: TTYTransportProtocol
            Description: Transport protocol1
        Protocol2
            Type: TTYTransportProtocol
            Description: Transport protocol2
        None
            Type: xsd:unsignedInt
            Description: Not used
    Default value: 
        Select => 1
        Protocol1 => null
        Protocol2 => null
        None => null
    Applicable methods: get_data, set_data, delete_data

    Description: Protocols to use for outgoing connections
    Parent objects: 
        Connection
    Values: 
        Select (mandatory)
            Type: TTYTransportProtocolSelect
            Description: Choose transport protocols
        Protocol1
            Type: TTYTransportProtocol
            Description: Transport protocol1
        Protocol2
            Type: TTYTransportProtocol
            Description: Transport protocol2
        None
            Type: xsd:unsignedInt
            Description: Not used
    Default value: 
        Select => 1
        Protocol1 => null
        Protocol2 => null
        None => null
    Applicable methods: get_data, set_data, delete_data

    Description: The preferred protocol to use
    Parent objects: 
        Connection
    Values: 
        Protocol (mandatory)
            Type: TTYTransportProtocol
            Description: Preferred transport protocol
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for parser_cfg, version 0. 0.

Objects

    Description: Parser configuration
    Parent objects: 
        Configuration
    Child objects: 
        Alias - Alias for command mapping
    Applicable methods: find_data, set_data, delete_data

Perl Data Object Documentation for mpls_oam_cfg, version 0. 0.

Objects

    Description: MPLS LSP verification configuration
    Task IDs required: mpls-te or mpls-ldp or mpls-static
    Parent objects: 
        Configuration
    Child objects: 
        DefaultRevision - Echo request default revision
        DisableVendorExtension - Disable vendor extension
        EnableOAM - Enable/Disable MPLS OAM globally.Without creating this object the MPLS OAM feature will not be enabled. Deleting this object will stop the MPLS OAM feature.
    Applicable methods: find_data, set_data, delete_data

    Description: Enable/Disable MPLS OAM globally.Without creating this object the MPLS OAM feature will not be enabled. Deleting this object will stop the MPLS OAM feature.
    Parent objects: 
        MPLS_OAM
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Always set to TRUE
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Disable vendor extension
    Parent objects: 
        MPLS_OAM
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Always set to TRUE
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Echo request default revision
    Parent objects: 
        MPLS_OAM
    Values: 
        Revision (mandatory)
            Type: MPLS_OAMRevisionType
            Description: Echo request default revision
    Default value: 
        Revision => Draft09Initial
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'Draft03Initial' - draft-ietf-mpls-lsp-ping-03 (initial)
        'Draft03Revision1' - draft-ietf-mpls-lsp-ping-03 (revision 1)
        'Draft03Revision2' - draft-ietf-mpls-lsp-ping-03 (revision 2)
        'Draft09Initial' - draft-ietf-mpls-lsp-ping-09 (initial)

    Description: Configure pm parameters
    Parent objects: 
        InterfaceConfiguration
    Child objects: 
        Hour24 - Configure pm parameters of 24 hour interval
        Minute15 - set opr min threshold
    Applicable methods: find_data, set_data, delete_data

    Description: Configure pm parameters of 24 hour interval
    Parent objects: 
        PerformanceManagement
    Child objects: 
        Hour24FEC - Configure fec g709 performance monitoring
        Hour24OTN - configure otn g709 performance monitoring
        Hour24Optics - Configure optics performance monitoring
    Applicable methods: find_data, set_data, delete_data

    Description: Configure fec g709 performance monitoring
    Parent objects: 
        Hour24
    Child objects: 
        Hour24FECReportTable - set fec TCA reporting status
        Hour24FECThresholdTable - Configure fec threshold
    Applicable methods: find_data, set_data, delete_data

    Description: set fec TCA reporting status
    Parent objects: 
        Hour24FEC
    Child objects: 
        Hour24FECReport - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Hour24FECReportTable
    Keys: 
        FECReport (mandatory)
            Type: FecReportType
            Description: Fec Report type
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enabled Fec Report
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure fec threshold
    Parent objects: 
        Hour24FEC
    Child objects: 
        Hour24FECThreshold - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Hour24FECThresholdTable
    Keys: 
        FECThreshold (mandatory)
            Type: FecThresholdType
            Description: Fec Threshold Type
    Values: 
        FecThresholdValue (mandatory)
            Type: xsd:unsignedInt
            Description: Fec threshold value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure optics performance monitoring
    Parent objects: 
        Hour24
    Child objects: 
        Hour24OpticsReportTable - set optics TCA reporting status
        Hour24OpticsThresholdTable - Configure threshold on optics parameters
    Applicable methods: find_data, set_data, delete_data

    Description: set optics TCA reporting status
    Parent objects: 
        Hour24Optics
    Child objects: 
        Hour24OpticsReport - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Hour24OpticsReportTable
    Keys: 
        OpticsReport (mandatory)
            Type: OpticsReportType
            Description: Optics Report Type
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enabled Optics Report
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure threshold on optics parameters
    Parent objects: 
        Hour24Optics
    Child objects: 
        Hour24OpticsThreshold - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Hour24OpticsThresholdTable
    Keys: 
        OpticsThreshold (mandatory)
            Type: OpticsThresholdType
            Description: Optics Threshold Type
    Values: 
        OpticsThresholdValue (mandatory)
            Type: xsd:unsignedInt
            Description: Optics Thresh Value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: configure otn g709 performance monitoring
    Parent objects: 
        Hour24
    Child objects: 
        Hour24OTNReportTable - set otn TCA reporting status
        Hour24OTNThresholdTable - Configure threshold on otn parameters
    Applicable methods: find_data, set_data, delete_data

    Description: set otn TCA reporting status
    Parent objects: 
        Hour24OTN
    Child objects: 
        Hour24OTNReport - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Hour24OTNReportTable
    Keys: 
        OTNReport (mandatory)
            Type: OtnReportType
            Description: Otn Report Type
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enabled Otn Report
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure threshold on otn parameters
    Parent objects: 
        Hour24OTN
    Child objects: 
        Hour24OTNThreshold - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Hour24OTNThresholdTable
    Keys: 
        OTNThreshold (mandatory)
            Type: OtnThresholdType
            Description: Otn Threshold Type
    Values: 
        OtnThresholdValue (mandatory)
            Type: xsd:unsignedInt
            Description: Otn Threshold Value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: set opr min threshold
    Parent objects: 
        PerformanceManagement
    Child objects: 
        Minute15FEC - Configure fec g709 performance monitoring
        Minute15OTN - configure otn g709 performance monitoring
        Minute15Optics - Configure optics performance monitoring
    Applicable methods: find_data, set_data, delete_data

    Description: Configure fec g709 performance monitoring
    Parent objects: 
        Minute15
    Child objects: 
        Minute15FECReportTable - set fec TCA reporting status
        Minute15FECThresholdTable - Configure fec threshold
    Applicable methods: find_data, set_data, delete_data

    Description: set fec TCA reporting status
    Parent objects: 
        Minute15FEC
    Child objects: 
        Minute15FECReport - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Minute15FECReportTable
    Keys: 
        FECReport (mandatory)
            Type: FecReportType
            Description: Fec Report Type
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enabled Fec Report
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure fec threshold
    Parent objects: 
        Minute15FEC
    Child objects: 
        Minute15FECThreshold - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Minute15FECThresholdTable
    Keys: 
        FECThreshold (mandatory)
            Type: FecThresholdType
            Description: Fec Threshold Type
    Values: 
        FecThresholdValue (mandatory)
            Type: xsd:unsignedInt
            Description: Fec Threshold Value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure optics performance monitoring
    Parent objects: 
        Minute15
    Child objects: 
        Minute15OpticsReportTable - set optics TCA reporting status
        Minute15OpticsThresholdTable - Configure threshold on optics parameters
    Applicable methods: find_data, set_data, delete_data

    Description: set optics TCA reporting status
    Parent objects: 
        Minute15Optics
    Child objects: 
        Minute15OpticsReport - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Minute15OpticsReportTable
    Keys: 
        OpticsReport (mandatory)
            Type: OpticsReportType
            Description: Optics Report Type
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enabled Optics Report
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure threshold on optics parameters
    Parent objects: 
        Minute15Optics
    Child objects: 
        Minute15OpticsThreshold - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Minute15OpticsThresholdTable
    Keys: 
        OpticsThreshold (mandatory)
            Type: OpticsThresholdType
            Description: Optics Threshold Type
    Values: 
        OpticsThresholdValue (mandatory)
            Type: xsd:unsignedInt
            Description: Optics Threshold Value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: configure otn g709 performance monitoring
    Parent objects: 
        Minute15
    Child objects: 
        Minute15OTNReportTable - set otn TCA reporting status
        Minute15OTNThresholdTable - Configure threshold on otn parameters
    Applicable methods: find_data, set_data, delete_data

    Description: set otn TCA reporting status
    Parent objects: 
        Minute15OTN
    Child objects: 
        Minute15OTNReport - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Minute15OTNReportTable
    Keys: 
        OTNReport (mandatory)
            Type: OtnReportType
            Description: Otn Report Type
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enabled Otn Report
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure threshold on otn parameters
    Parent objects: 
        Minute15OTN
    Child objects: 
        Min15OtnThresh - none
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: none
    Task IDs required: dwdm
    Parent objects: 
        Minute15OTNThresholdTable
    Keys: 
        OTNThreshold (mandatory)
            Type: OtnThresholdType
            Description: Otn Threshold Type
    Values: 
        OtnThresholdValue (mandatory)
            Type: xsd:unsignedInt
            Description: Otn Threshold Value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'REPORT_EC_BITS' - PM Fec ec bits report
        'REPORT_UC_WORDS' - PM Fec uc words report

    Definition: Enumeration. Valid values are: 
        'THRESH_EC_BITS' - PM Fec ec bits threshold
        'THRESH_UC_WORDS' - PM Fec uc words threshold

    Definition: Enumeration. Valid values are: 
        'THRESH_ES_SM_NE' - PM Otn es sm ne threshold
        'THRESH_SES_SM_NE' - PM Otn ses sm ne threshold
        'THRESH_UAS_SM_NE' - PM Otn uas sm ne threshold
        'THRESH_BBE_SM_NE' - PM Otn bbe sm ne threshold
        'THRESH_FC_SM_NE' - PM Otn fc sm ne threshold
        'THRESH_ESR_SM_NE' - PM Otn esr sm ne threshold
        'THRESH_SESR_SM_NE' - PM Otn sesr sm ne threshold
        'THRESH_BBER_SM_NE' - PM Otn bber sm ne threshold
        'THRESH_ES_PM_NE' - PM Otn es pm ne threshold
        'THRESH_SES_PM_NE' - PM Otn ses pm ne threshold
        'THRESH_UAS_PM_NE' - PM Otn uas pm ne threshold
        'THRESH_BBE_PM_NE' - PM Otn bbe pm ne threshold
        'THRESH_FC_PM_NE' - PM Otn fc pm ne threshold
        'THRESH_ESR_PM_NE' - PM Otn esr pm ne threshold
        'THRESH_SESR_PM_NE' - PM Otn sesr pm ne threshold
        'THRESH_BBER_PM_NE' - PM Otn bber pm ne threshold
        'THRESH_ES_SM_FE' - PM Otn es sm fe threshold
        'THRESH_SES_SM_FE' - PM Otn ses sm fe threshold
        'THRESH_UAS_SM_FE' - PM Otn uas sm fe threshold
        'THRESH_BBE_SM_FE' - PM Otn bbe sm fe threshold
        'THRESH_FC_SM_FE' - PM Otn fc sm fe threshold
        'THRESH_ESR_SM_FE' - PM Otn esr sm fe threshold
        'THRESH_SESR_SM_FE' - PM Otn sesr sm fe threshold
        'THRESH_BBER_SM_FE' - PM Otn bber sm fe threshold
        'THRESH_ES_PM_FE' - PM Otn es pm fe threshold
        'THRESH_SES_PM_FE' - PM Otn ses pm fe threshold
        'THRESH_UAS_PM_FE' - PM Otn uas pm fe threshold
        'THRESH_BBE_PM_FE' - PM Otn bbe pm fe threshold
        'THRESH_FC_PM_FE' - PM Otn fc pm fe threshold
        'THRESH_ESR_PM_FE' - PM Otn esr pm fe threshold
        'THRESH_SESR_PM_FE' - PM Otn sesr pm fe threshold
        'THRESH_BBER_PM_FE' - PM Otn bber pm fe threshold

    Definition: Enumeration. Valid values are: 
        'REPORT_ES_SM_NE' - PM Otn es sm ne report
        'REPORT_SES_SM_NE' - PM Otn ses sm ne report
        'REPORT_UAS_SM_NE' - PM Otn uas sm ne report
        'REPORT_BBE_SM_NE' - PM Otn bbe sm ne report
        'REPORT_FC_SM_NE' - PM Otn fc sm ne report
        'REPORT_ESR_SM_NE' - PM Otn esr sm ne report
        'REPORT_SESR_SM_NE' - PM Otn sesr sm ne report
        'REPORT_BBER_SM_NE' - PM Otn bber sm ne report
        'REPORT_ES_PM_NE' - PM Otn es pm ne report
        'REPORT_SES_PM_NE' - PM Otn ses pm ne report
        'REPORT_UAS_PM_NE' - PM Otn uas pm ne report
        'REPORT_BBE_PM_NE' - PM Otn bbe pm ne report
        'REPORT_FC_PM_NE' - PM Otn fc pm ne report
        'REPORT_ESR_PM_NE' - PM Otn esr pm ne report
        'REPORT_SESR_PM_NE' - PM Otn sesr pm ne report
        'REPORT_BBER_PM_NE' - PM Otn bber pm ne report
        'REPORT_ES_SM_FE' - PM Otn es sm fe report
        'REPORT_SES_SM_FE' - PM Otn ses sm fe report
        'REPORT_UAS_SM_FE' - PM Otn uas sm fe report
        'REPORT_BBE_SM_FE' - PM Otn bbe sm fe report
        'REPORT_FC_SM_FE' - PM Otn fc sm fe report
        'REPORT_ESR_SM_FE' - PM Otn esr sm fe report
        'REPORT_SESR_SM_FE' - PM Otn sesr sm fe report
        'REPORT_BBER_SM_FE' - PM Otn bber sm fe report
        'REPORT_ES_PM_FE' - PM Otn es pm fe report
        'REPORT_SES_PM_FE' - PM Otn ses pm fe report
        'REPORT_UAS_PM_FE' - PM Otn uas pm fe report
        'REPORT_BBE_PM_FE' - PM Otn bbe pm fe report
        'REPORT_FC_PM_FE' - PM Otn fc pm fe report
        'REPORT_ESR_PM_FE' - PM Otn esr pm fe report
        'REPORT_SESR_PM_FE' - PM Otn sesr pm fe report
        'REPORT_BBER_PM_FE' - PM Otn bber pm fe report

    Definition: Enumeration. Valid values are: 
        'THRESH_LBC_MIN' - PM Optics lbc min threshold
        'THRESH_LBC_MAX' - PM Optics lbc max threshold
        'THRESH_OPT_MIN' - PM Optics opt min threshold
        'THRESH_OPT_MAX' - PM Optics opt max threshold
        'THRESH_OPR_MIN' - PM Optics opr min threshold
        'THRESH_OPR_MAX' - PM Optics opr max threshold

    Definition: Enumeration. Valid values are: 
        'REPORT_LBC_MIN' - PM Optics lbc min report
        'REPORT_LBC_MAX' - PM Optics lbc max report
        'REPORT_OPT_MIN' - PM Optics opt min report
        'REPORT_OPT_MAX' - PM Optics opt max report
        'REPORT_OPR_MIN' - PM Optics opr min report
        'REPORT_OPR_MAX' - PM Optics opr max report

    Description: LCAC specific MPLS global configuration
    Parent objects: 
        MPLS_TE
    Child objects: 
        BFD - BFD configuration
        BandwidthHoldTimer - Bandwidth hold timer
        PeriodicFloodingTimer - Periodic flooding timer
        ReoptimizeDelayCleanupTimer - Reoptimization delay cleanup timer
        ReoptimizeDelayInstallTimer - Reoptimize delay install timer
    Applicable methods: find_data, set_data, delete_data

    Description: Bandwidth hold timer
    Parent objects: 
        LCAC
    Values: 
        Value (mandatory)
            Type: MPLS_LCACBandwidthHoldTimerRange
            Description: Bandwidth hold timer value (seconds)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Periodic flooding timer
    Parent objects: 
        LCAC
    Values: 
        Value (mandatory)
            Type: Range. Value lies between 30 and 3600
            Description: Periodic flooding value (seconds)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Reoptimize delay install timer
    Parent objects: 
        LCAC
    Values: 
        Value (mandatory)
            Type: Range. Value lies between 0 and 3600
            Description: Reoptimization Delay Install Value (seconds)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Reoptimization delay cleanup timer
    Parent objects: 
        LCAC
    Values: 
        Value (mandatory)
            Type: Range. Value lies between 0 and 300
            Description: Reoptimization Delay Cleanup Value (seconds)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: BFD configuration
    Parent objects: 
        LCAC
    Child objects: 
        DetectionMultiplier - Detection multiplier for BFD sessions created by TE
        Interval - Hello interval for BFD sessions created by TE
    Applicable methods: find_data, set_data, delete_data

    Description: Hello interval for BFD sessions created by TE
    Parent objects: 
        BFD
    Values: 
        Interval (mandatory)
            Type: Range. Value lies between 15 and 200
            Description: BFD hello interval in milliseconds
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Detection multiplier for BFD sessions created by TE
    Parent objects: 
        BFD
    Values: 
        Multiplier (mandatory)
            Type: Range. Value lies between 2 and 10
            Description: BFD multiplier
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Range. Value lies between 1 and 300

    Description: Ethernet Features Configuration
    Task IDs required: ethernet-services
    Parent objects: 
        Configuration
    Applicable methods: find_data, set_data, delete_data

Perl Data Object Documentation for ipv4_multicast_sap_oper, version 1. 0.

Objects

    Description: SAP operational data
    Task IDs required: multicast
    Parent objects: 
        Operational
    Child objects: 
        SessionInfoSummaryTable - SAP Session Summary Table
        SessionInfoTable - SAP Session Table
    Applicable methods: find_data

    Description: SAP Session Summary Table
    Parent objects: 
        SAP
    Child objects: 
        SessionInfoSummary - SAP Session Summary Entry
    Applicable filters: 
        SAPGroupFilter
        SAPSessionNameFilter
    Applicable methods: get_keys, get_entries

    Description: SAP Session Summary Entry
    Parent objects: 
        SessionInfoSummaryTable
    Keys: 
        SessionName
            Type: xsd:string
            Description:  Session Name
        SessionOwner
            Type: xsd:string
            Description:  Session Owner
    Value: sap_bag_summary
    Applicable methods: get_data

    Description: SAP Session Table
    Parent objects: 
        SAP
    Child objects: 
        SessionInfo - SAP Session Entry
    Applicable filters: 
        SAPGroupFilter
        SAPSessionNameFilter
    Applicable methods: get_keys, get_entries

    Description: SAP Session Entry
    Parent objects: 
        SessionInfoTable
    Keys: 
        SessionName
            Type: xsd:string
            Description:  Session Name
        SessionOwner
            Type: xsd:string
            Description:  Session Owner
    Value: sap_bag
    Applicable methods: get_data

Filters

    Description: Filter based on Announcement Group
    Parameters: 
        Group (mandatory)
            Type: IPV4Address
            Description: Group Address

    Description: Filter based on Session Name
    Parameters: 
        Name (mandatory)
            Type: xsd:string
            Description: Session Name

Perl Data Object Documentation for netflow_crs_cfg, version 3. 0.

Objects

    Description: NetFlow Configuration
    Task IDs required: netflow
    Parent objects: 
        Configuration
    Child objects: 
        FlowExporterMapTable - Configure a flow exporter map
        FlowMonitorMapTable - Flow monitor map configuration
        FlowSamplerMapTable - Flow sampler map configuration
    Applicable methods: find_data, set_data, delete_data

    Description: Configure a flow exporter map
    Parent objects: 
        NetFlow
    Child objects: 
        FlowExporterMap - Exporter map name
    Applicable methods: get_keys, set_data, delete_data

    Description: Exporter map name
    Parent objects: 
        FlowExporterMapTable
    Keys: 
        ExporterMapName (mandatory)
            Type: NFMapNameType
            Description: Exporter map name
    Child objects: 
        DSCP - Specify DSCP value for export packets
        Destination - Configure export destination (collector)
        Enable - Enable the flow exporter map
        SourceInterface - Configure source interface for collector
        UDP - Use UDP as transport protocol
        VersionTable - Specify export version parameters
    Applicable methods: find_data, set_data, delete_data

    Description: Enable the flow exporter map
    Parent objects: 
        FlowExporterMap
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: True to enable  the flow exporter map
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure export destination (collector)
    Parent objects: 
        FlowExporterMap
    Values: 
        IPAddress
            Type: IPV4Address
            Description: Destination IPv4 address
        VRFName
            Type: xsd:string
            Description: VRF name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify DSCP value for export packets
    Parent objects: 
        FlowExporterMap
    Values: 
        DSCP (mandatory)
            Type: Range. Value lies between 0 and 63
            Description: DSCP value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure source interface for collector
    Parent objects: 
        FlowExporterMap
    Values: 
        InterfaceName (mandatory)
            Type: Interface
            Description: Source interface name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Use UDP as transport protocol
    Parent objects: 
        FlowExporterMap
    Child objects: 
        DestinationPort - Configure Destination UDP port
    Applicable methods: find_data, set_data, delete_data

    Description: Configure Destination UDP port
    Parent objects: 
        UDP
    Values: 
        PortNumber (mandatory)
            Type: Range. Value lies between 1024 and 65535
            Description: Port number
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify export version parameters
    Parent objects: 
        FlowExporterMap
    Child objects: 
        Version - Configure export version options
    Applicable methods: get_keys, set_data, delete_data

    Description: Configure export version options
    Parent objects: 
        VersionTable
    Keys: 
        VersionNumber (mandatory)
            Type: NFExportVersionType
            Description: Export version number
    Child objects: 
        CommonTemplateTimeout - Specify custom timeout for the template
        DataTemplateTimeout - Data template configuration options
        Enable - Enable the export version
        Options - Specify options for exporting templates
        OptionsTemplateTimeout - Option template configuration options
    Applicable methods: find_data, set_data, delete_data

    Description: Enable the export version
    Parent objects: 
        Version
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: True to enable the export version
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify options for exporting templates
    Parent objects: 
        Version
    Child objects: 
        InterfaceTableExportTimeout - Specify timeout for exporting interface table
        SamplerTableExportTimeout - Specify timeout for exporting sampler table
    Applicable methods: find_data, set_data, delete_data

    Description: Specify timeout for exporting interface table
    Parent objects: 
        Options
    Values: 
        Timeout (mandatory)
            Type: NFExportTimeoutType
            Description: Timeout value in seconds
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify timeout for exporting sampler table
    Parent objects: 
        Options
    Values: 
        Timeout (mandatory)
            Type: NFExportTimeoutType
            Description: Timeout value in seconds
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify custom timeout for the template
    Parent objects: 
        Version
    Values: 
        Timeout (mandatory)
            Type: NFTemplateTimeoutType
            Description: Timeout value in seconds
    Default value: 
        Timeout => 1800
    Applicable methods: get_data, set_data, delete_data

    Description: Data template configuration options
    Parent objects: 
        Version
    Values: 
        Timeout (mandatory)
            Type: NFTemplateTimeoutType
            Description: Timeout value in seconds
    Default value: 
        Timeout => 1800
    Applicable methods: get_data, set_data, delete_data

    Description: Option template configuration options
    Parent objects: 
        Version
    Values: 
        Timeout (mandatory)
            Type: NFTemplateTimeoutType
            Description: Timeout value in seconds
    Default value: 
        Timeout => 1800
    Applicable methods: get_data, set_data, delete_data

    Description: Flow monitor map configuration
    Parent objects: 
        NetFlow
    Child objects: 
        FlowMonitorMap - Monitor map name
    Applicable methods: get_keys, set_data, delete_data

    Description: Monitor map name
    Parent objects: 
        FlowMonitorMapTable
    Keys: 
        MonitorMapName (mandatory)
            Type: NFMapNameType
            Description: Monitor map name
    Child objects: 
        CacheActiveAgingTimeout - Specify the active flow cache aging timeout
        CacheAgingMode - Specify the flow cache aging mode
        CacheEntries - Specify the number of entries in the flow cache
        CacheInactiveAgingTimeout - Specify the inactive flow cache aging timeout
        CacheUpdateAgingTimeout - Specify the update flow cache aging timeout
        Enable - Enable the flow monitor map
        ExporterTable - Configure exporters to be used by the monitor-map
        Record - Specify a flow record format
    Applicable methods: find_data, set_data, delete_data

    Description: Enable the flow monitor map
    Parent objects: 
        FlowMonitorMap
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: True to enable the flow monitor map
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure exporters to be used by the monitor-map
    Parent objects: 
        FlowMonitorMap
    Child objects: 
        Exporter - Configure exporter to be used by the monitor-map
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Configure exporter to be used by the monitor-map
    Parent objects: 
        ExporterTable
    Keys: 
        ExporterName (mandatory)
            Type: NFMapNameType
            Description: Exporter name
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: True to enable the exporter
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify the number of entries in the flow cache
    Parent objects: 
        FlowMonitorMap
    Values: 
        Entries (mandatory)
            Type: NFCacheEntryType
            Description: Number of flow cache entries
    Default value: 
        Entries => 65535
    Applicable methods: get_data, set_data, delete_data

    Description: Specify the active flow cache aging timeout
    Parent objects: 
        FlowMonitorMap
    Values: 
        Timeout (mandatory)
            Type: NFActiveCacheAgingTimeoutType
            Description: Timeout value in seconds
    Default value: 
        Timeout => 1800
    Applicable methods: get_data, set_data, delete_data

    Description: Specify the inactive flow cache aging timeout
    Parent objects: 
        FlowMonitorMap
    Values: 
        Timeout (mandatory)
            Type: NFInactiveCacheAgingTimeoutType
            Description: Timeout value in seconds
    Default value: 
        Timeout => 15
    Applicable methods: get_data, set_data, delete_data

    Description: Specify the update flow cache aging timeout
    Parent objects: 
        FlowMonitorMap
    Values: 
        Timeout (mandatory)
            Type: NFUpdateCacheAgingTimeoutType
            Description: Timeout value in seconds
    Default value: 
        Timeout => 1800
    Applicable methods: get_data, set_data, delete_data

    Description: Specify the flow cache aging mode
    Parent objects: 
        FlowMonitorMap
    Values: 
        Mode (mandatory)
            Type: NFCacheAgingModeType
            Description: Cache aging mode
    Default value: 
        Mode => Normal
    Applicable methods: get_data, set_data, delete_data

    Description: Specify a flow record format
    Parent objects: 
        FlowMonitorMap
    Values: 
        Record (mandatory)
            Type: NFMapNameType
            Description: Flow record format (Either 'ipv4-raw', 'mpls', or 'ipv6')
        Field
            Type: NFMapNameType
            Description: Field type 'ipv4-fields', 'ipv6-fields' or 'ipv4-ipv6-fields'
        Label
            Type: Range. Value lies between 1 and 6
            Description: Enter label value for MPLS record type
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Flow sampler map configuration
    Parent objects: 
        NetFlow
    Child objects: 
        FlowSamplerMap - Sampler map name
    Applicable methods: get_keys, set_data, delete_data

    Description: Sampler map name
    Parent objects: 
        FlowSamplerMapTable
    Keys: 
        SamplerMapName (mandatory)
            Type: NFMapNameType
            Description: Sampler map name
    Child objects: 
        Enable - Enable the sampler map
        SamplingModeTable - Configure packet sampling mode
    Applicable methods: find_data, set_data, delete_data

    Description: Enable the sampler map
    Parent objects: 
        FlowSamplerMap
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: True to enable the sampler map
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure packet sampling mode
    Parent objects: 
        FlowSamplerMap
    Child objects: 
        SamplingMode - Configure sampling mode
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Configure sampling mode
    Parent objects: 
        SamplingModeTable
    Keys: 
        Mode (mandatory)
            Type: NFSamplingModeType
            Description: Sampling mode
    Values: 
        SampleNumber (mandatory)
            Type: NFSampleNumberType
            Description: Number of packets to be sampled in the sampling interval
        Interval (mandatory)
            Type: NFSampleIntervalType
            Description: Sampling interval in units of packets
    Default value: 
        SampleNumber => 1
        Interval => 10000
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: xsd:boolean

    Definition: Enumeration. Valid values are: 
        'Random' - Random sampling

    Definition: Range. Value lies between 1 and 604800

    Definition: Range. Value lies between 0 and 604800

    Definition: BoundedString. Length less than or equal to 32

    Definition: Range. Value lies between 1 and 1

    Definition: Range. Value lies between 1 and 65535

    Definition: Range. Value lies between 4096 and 1000000

    Definition: Range. Value lies between 9 and 9

    Definition: Enumeration. Valid values are: 
        'Normal' - Normal, caches age
        'Permanent' - Permanent, caches never age

    Definition: Range. Value lies between 1 and 604800

    Definition: Range. Value lies between 0 and 604800

    Definition: Range. Value lies between 1 and 604800

    Description: Configure a multilink controller
    Task IDs required: sonet-sdh
    Parent objects: 
        InterfaceConfiguration
    Child objects: 
        BundleTable - Configure a multilink bundle interface
    Applicable methods: find_data, set_data, delete_data

    Description: Configure a multilink bundle interface
    Parent objects: 
        MgmtMultilink
    Child objects: 
        Bundle - Bundle Id
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Bundle Id
    Parent objects: 
        BundleTable
    Keys: 
        BundleId (mandatory)
            Type: Range. Value lies between 1 and 1023
            Description: Bundle Id
    Values: 
        BundleId (mandatory)
            Type: Range. Value lies between 1 and 1023
            Description: Bundle Id
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for ppp_mgr_cfg, version 3. 1.

Objects

    Description: Interface PPP configuration data
    Task IDs required: ppp
    Parent objects: 
        InterfaceConfiguration
    Child objects: 
        Authentication - PPP authentication parameters
        CHAP - Challenge Handshake Authentication Protocol (CHAP) configuration data
        FSM - PPP FSM configuration data
        MS-CHAP - Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) configuration data
        Multilink - Multilink configuration
        PAP - Password Authentication Protocol (PAP) configuration data
    Applicable methods: find_data, set_data, delete_data

Perl Data Object Documentation for policymgr_oper, version 0. 0.

Objects

    Description: QOS operational data
    Task IDs required: qos
    Parent objects: 
        Operational
    Child objects: 
        NodeTable - Node-specific QOS operational data
    Applicable methods: find_data

    Description: Node-specific QOS operational data
    Parent objects: 
        QOS
    Child objects: 
        Node - QOS operational data for a particular node
    Applicable methods: get_keys

    Description: QOS operational data for a particular node
    Parent objects: 
        NodeTable
    Keys: 
        NodeID (mandatory)
            Type: NodeID
            Description: The node
    Child objects: 
        Policymap - Empty class
    Applicable methods: find_data

    Description: Empty class
    Parent objects: 
        Node
    Child objects: 
        InterfaceTable - Container class for operational data of all interfaces
    Applicable methods: find_data

    Description: Container class for operational data of all interfaces
    Parent objects: 
        Policymap
    Child objects: 
        Interface - QOS policy-map operational data for a particular interface
    Applicable methods: get_keys

    Description: QOS policy-map operational data for a particular interface
    Parent objects: 
        InterfaceTable
    Keys: 
        Name (mandatory)
            Type: Interface
            Description: Name of the interface
    Child objects: 
        Input - QOS policy-map operational data in the input direction
        InputPostDecap - QOS policy-map operational data in the inbound post decryption direction (C12000 platform only)
        InputPreDecap - QOS policy-map operational data in the inbound pre decryption direction (C12000 platform only)
        Output - QOS policy-map operational data in the output direction
        OutputPostEncap - QOS policy-map operational data in the outbound post encryption direction (C12000 platform only)
        OutputPreEncap - QOS policy-map operational data in the outbound pre encryption direction (C12000 platform only)
    Applicable methods: find_data

    Description: QOS policy-map operational data in the input direction
    Parent objects: 
        Interface
    Child objects: 
        Statistics - A piece of QOS policy-map operational data for an interface
    Applicable methods: get_keys, get_entries

    Description: A piece of QOS policy-map operational data for an interface
    Parent objects: 
        Input
        Output
        InputPreDecap
        InputPostDecap
        OutputPreEncap
        OutputPostEncap
    Keys: 
        Index (mandatory)
            Type: xsd:unsignedInt
            Description: Index of the table element
    Value: policy_stats
    Applicable methods: get_data

    Description: QOS policy-map operational data in the output direction
    Parent objects: 
        Interface
    Child objects: 
        Statistics - A piece of QOS policy-map operational data for an interface
    Applicable methods: get_keys, get_entries

    Description: QOS policy-map operational data in the inbound pre decryption direction (C12000 platform only)
    Parent objects: 
        Interface
    Child objects: 
        Statistics - A piece of QOS policy-map operational data for an interface
    Applicable methods: get_keys, get_entries

    Description: QOS policy-map operational data in the inbound post decryption direction (C12000 platform only)
    Parent objects: 
        Interface
    Child objects: 
        Statistics - A piece of QOS policy-map operational data for an interface
    Applicable methods: get_keys, get_entries

    Description: QOS policy-map operational data in the outbound pre encryption direction (C12000 platform only)
    Parent objects: 
        Interface
    Child objects: 
        Statistics - A piece of QOS policy-map operational data for an interface
    Applicable methods: get_keys, get_entries

    Description: QOS policy-map operational data in the outbound post encryption direction (C12000 platform only)
    Parent objects: 
        Interface
    Child objects: 
        Statistics - A piece of QOS policy-map operational data for an interface
    Applicable methods: get_keys, get_entries

Perl Data Object Documentation for hfr_invmgr_common, version 0. 0.

Objects

    Description: Slot table contains all slots in the rack
    Parent objects: 
        Rack
        Rack
    Child objects: 
        Slot - Slot number
    Applicable methods: can not be determined as the namespace is not known

    Description: Slot number
    Parent objects: 
        SlotTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: Slot number
    Child objects: 
        BasicAttributes - Attributes
        CardTable - Card table contains all cards in the slot
    Applicable methods: can not be determined as the namespace is not known

    Description: Card table contains all cards in the slot
    Parent objects: 
        Slot
    Child objects: 
        Card - Card number
    Applicable methods: can not be determined as the namespace is not known

    Description: Card number
    Parent objects: 
        CardTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: card number
    Child objects: 
        BasicAttributes - Attributes
        HWComponentTable - HWComponent table contains all HW modules within the card 
        PortSlotTable - PortSlotTable contains all optics ports in a SPA/PLIM.
        SensorTable - ModuleSensorTable contains all sensors in a Module.
        SubSlotTable - SubSlotTable contains all subslots in a Slot
    Applicable methods: can not be determined as the namespace is not known

    Description: SubSlotTable contains all subslots in a Slot
    Parent objects: 
        Card
    Child objects: 
        SubSlot - SubSlot number
    Applicable methods: can not be determined as the namespace is not known

    Description: SubSlot number
    Parent objects: 
        SubSlotTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: subslot number
    Child objects: 
        BasicAttributes - Attributes
        Module - Module string
    Applicable methods: can not be determined as the namespace is not known

    Description: Module string
    Parent objects: 
        SubSlot
    Child objects: 
        BasicAttributes - Attributes
        PortSlotTable - PortSlotTable contains all optics ports in a SPA/PLIM.
        SensorTable - ModuleSensorTable contains all sensors in a Module.
    Applicable methods: can not be determined as the namespace is not known

    Description: PortSlotTable contains all optics ports in a SPA/PLIM.
    Parent objects: 
        Module
        Card
    Child objects: 
        PortSlot - PortSlot number in the SPA/PLIM
    Applicable methods: can not be determined as the namespace is not known

    Description: PortSlot number in the SPA/PLIM
    Parent objects: 
        PortSlotTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: portslot number
    Child objects: 
        BasicAttributes - Attributes
        Port - Port string
    Applicable methods: can not be determined as the namespace is not known

    Description: Port string
    Parent objects: 
        PortSlot
    Child objects: 
        BasicAttributes - Attributes
    Applicable methods: can not be determined as the namespace is not known

    Description: Attributes
    Parent objects: 
        Slot
        Card
        SubSlot
        Module
        PortSlot
        Port
        HWComponent
        Sensor
    Child objects: 
        BasicInfo - Inventory information
        FRUInfo - Field Replaceable Unit (FRU) inventory information
    Applicable methods: can not be determined as the namespace is not known

    Description: Inventory information
    Parent objects: 
        BasicAttributes
    Value: inv_phy_entity_basic_info
    Applicable methods: can not be determined as the namespace is not known

    Description: Field Replaceable Unit (FRU) inventory information
    Parent objects: 
        BasicAttributes
    Value: inv_card_fru_info
    Applicable methods: can not be determined as the namespace is not known

    Description: ModuleSensorTable contains all sensors in a Module.
    Parent objects: 
        Card
        HWComponent
        Module
    Child objects: 
        Sensor - Sensor number in the Module
    Applicable methods: can not be determined as the namespace is not known

    Description: Sensor number in the Module
    Parent objects: 
        SensorTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: sensor number
    Child objects: 
        BasicAttributes - Attributes
    Applicable methods: can not be determined as the namespace is not known

    Description: HWComponent table contains all HW modules within the card 
    Parent objects: 
        Card
    Child objects: 
        HWComponent - HWComponent number
    Applicable methods: can not be determined as the namespace is not known

    Description: HWComponent number
    Parent objects: 
        HWComponentTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: node number
    Child objects: 
        BasicAttributes - Attributes
        SensorTable - ModuleSensorTable contains all sensors in a Module.
    Applicable methods: can not be determined as the namespace is not known

Perl Data Object Documentation for mpls_lcac_interface_cfg, version 12. 3.

Objects

    Description: LCAC specific MPLS interface configuration
    Parent objects: 
        Interface
    Child objects: 
        AdminWeight - Set administrative weight for the interface
        AttributeFlags - Set user defined interface attribute flags
        AttributeNames - Set the interface attribute names
        BFD - Enable use of Bidirectional Forwarding Detection
        DownThresholds - Set thresholds for decreased resource availability in %
        Enable - Enable MPLS-TE on the link
        SRLGTable - Configure SRLG membership for the interface
        UpThresholds - Set thresholds for increased resource availability in %
    Applicable methods: find_data, set_data, delete_data

    Description: Set administrative weight for the interface
    Parent objects: 
        LCAC
    Values: 
        Value (mandatory)
            Type: xsd:unsignedInt
            Description: Administrative weight for the interface
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Set user defined interface attribute flags
    Parent objects: 
        LCAC
    Values: 
        Value (mandatory)
            Type: HexInteger
            Description: User defined interface attribute flags
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Set the interface attribute names
    Parent objects: 
        LCAC
    Values: 
        Values (mandatory)
            Type: xsd:string[32]
            Description: Array of Attribute Names
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Set thresholds for decreased resource availability in %
    Parent objects: 
        LCAC
    Values: 
        Values (mandatory)
            Type: MPLS_LCACFloodingThresholdPercentRange[14]
            Description: Array of down threshold percentage
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Set thresholds for increased resource availability in %
    Parent objects: 
        LCAC
    Values: 
        Values (mandatory)
            Type: MPLS_LCACFloodingThresholdPercentRange[14]
            Description: Array of up threshold percentage
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Enable MPLS-TE on the link
    Parent objects: 
        LCAC
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enable MPLS-TE on the link
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Enable use of Bidirectional Forwarding Detection
    Parent objects: 
        LCAC
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Enable BFD
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SRLG membership for the interface
    Parent objects: 
        LCAC
    Child objects: 
        SRLG - SRLG membership number
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: SRLG membership number
    Parent objects: 
        SRLGTable
    Keys: 
        SRLGNumber (mandatory)
            Type: Range. Value lies between 0 and -1
            Description: SRLG membership number
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Always set to true
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Range. Value lies between 0 and 100

    Description: MSDP operational data
    Task IDs required: multicast
    Parent objects: 
        Operational
    Child objects: 
        AllSACacheTable - All of MSDP SA Cache ignoring source flags
        Globals - MSDP Global Data
        PeerSummaryTable - MSDP Peers summary
        PeerTable - MSDP Peers
        RPFTable - MSDP Reverse Path Forwaring Info
        SACacheTable - MSDP SA Cache table - sources with Local & External flags Set
        StatPeerTable - Statistics for MSDP Peers
    Applicable methods: find_data

    Description: MSDP Global Data
    Parent objects: 
        MSDP
    Value: msdp_global_bag
    Applicable methods: get_data

    Description: All of MSDP SA Cache ignoring source flags
    Parent objects: 
        MSDP
    Child objects: 
        AllSACache - MSDP All SA Cache Entries ignoring source flags
    Applicable methods: get_keys, get_entries

    Description: MSDP All SA Cache Entries ignoring source flags
    Parent objects: 
        AllSACacheTable
    Keys: 
        SourceAddress
            Type: IPV4Address
            Description: Source Address
        GroupAddress
            Type: IPV4Address
            Description: Group Address
    Value: msdp_src_bag
    Applicable methods: get_data

    Description: MSDP SA Cache table - sources with Local & External flags Set
    Parent objects: 
        MSDP
    Child objects: 
        SACache - MSDP SA Cache Entry - Sources with Local & External flags set
    Applicable filters: 
        MSDPPeerFilter
        MSDP_SGFilter
        MSDP_RPFilter
        MSDP_ASNFilter
    Applicable methods: get_keys, get_entries

    Description: MSDP SA Cache Entry - Sources with Local & External flags set
    Parent objects: 
        SACacheTable
    Keys: 
        SourceAddress
            Type: IPV4Address
            Description: Source Address
        GroupAddress
            Type: IPV4Address
            Description: Group Address
        RPAddress
            Type: IPV4Address
            Description: RP Address
        ASNumber
            Type: Range. Value lies between 1 and 65535
            Description: AS Number
    Value: msdp_src_bag
    Applicable methods: get_data

    Description: MSDP Peers
    Parent objects: 
        MSDP
    Child objects: 
        Peer - MSDP Peer Info
    Applicable methods: get_keys, get_entries

    Description: MSDP Peer Info
    Parent objects: 
        PeerTable
    Keys: 
        PeerAddress (mandatory)
            Type: IPV4Address
            Description: Peer Address
    Value: msdp_peer_bag
    Applicable methods: get_data

    Description: MSDP Peers summary
    Parent objects: 
        MSDP
    Child objects: 
        PeerSummary - MSDP Peer Summary Info
    Applicable methods: get_keys, get_entries

    Description: MSDP Peer Summary Info
    Parent objects: 
        PeerSummaryTable
    Keys: 
        PeerAddress (mandatory)
            Type: IPV4Address
            Description: Peer Address
    Value: msdp_peer_summ_bag
    Applicable methods: get_data

    Description: MSDP Reverse Path Forwaring Info
    Parent objects: 
        MSDP
    Child objects: 
        RPF - MSDP Reverse Path Forwaring entries
    Applicable methods: get_keys, get_entries

    Description: MSDP Reverse Path Forwaring entries
    Parent objects: 
        RPFTable
    Keys: 
        RPAddress (mandatory)
            Type: IPV4Address
            Description: RP Address
    Value: msdp_rpf_bag
    Applicable methods: get_data

    Description: Statistics for MSDP Peers
    Parent objects: 
        MSDP
    Child objects: 
        StatPeer - MSDP Peer Statistics Info
    Applicable methods: get_keys, get_entries

    Description: MSDP Peer Statistics Info
    Parent objects: 
        StatPeerTable
    Keys: 
        PeerAddress (mandatory)
            Type: IPV4Address
            Description: Peer Address
    Value: msdp_stats_peer_bag
    Applicable methods: get_data

Filters

    Description: <Filter based on Source & Group Address>
    Parameters: 
        SourceAddress
            Type: IPV4Address
            Description: Source Address
        GroupAddress
            Type: IPV4Address
            Description: Group Address

    Description: <Filter based on RP Address>
    Parameters: 
        RPAddress (mandatory)
            Type: IPV4Address
            Description: RP Address

    Description: <Filter based on advertising Peer Address>
    Parameters: 
        PeerAddress (mandatory)
            Type: IPV4Address
            Description: Peer Address

    Description: <Filter based on AS Number>
    Parameters: 
        ASNumber (mandatory)
            Type: Range. Value lies between 1 and 65535
            Description: AS Number

    Description: ICMPEcho Operation type
    Parent objects: 
        OperationType
    Child objects: 
        Create - Create operation with specified type
        DataSize - Protocol data size in payload of probe packets
        DestAddress - IPv4 address of the target device
        EnhancedStatsTable - Table of statistics collection intervals
        Frequency - Frequency of the probing
        History - Configure the history parameters for this operation
        SourceAddress - IPv4 address of the source device
        Statistics - Statistics collection aggregated over an hour
        Tag - Add a tag for this operation
        Timeout - Probe/Control timeout interval
        Tos - Type of service setting in probe packet
        VRF - Configure IPSLA for a VPN Routing/Forwarding instance)
    Applicable methods: find_data, set_data, delete_data

    Description: Protocol data size in payload of probe packets
    Parent objects: 
        ICMPEcho
    Child objects: 
        Request - Payload size in request probe packet
    Applicable methods: find_data, set_data, delete_data

    Description: Payload size in request probe packet
    Parent objects: 
        DataSize
    Values: 
        RequestDataSize (mandatory)
            Type: Range. Value lies between 0 and 16384
            Description: Request data size in bytes
    Default value: 
        RequestDataSize => 36
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for crypto_ipsec_imp_oper, version 1. 5.

Objects

    Description: IPSec operational data
    Task IDs required: crypto
    Parent objects: 
        Operational
    Child objects: 
        CryptoProfileTable - IPSec Profile table
        FVRFTable - SAs by FVRF
        IVRFTable - SAs by IVRF
        InterfaceTable - IPSec Interface table
        NodeTable - SAs by Node ID (location)
        PeerTable - SAs by Peer
        ProfileTable - IPSec Manager Profile table
        SecurityAssociationBrief - IPSec summary
        SecurityAssociationCount - IPSec SA Count
        SecurityAssociationTable - IPSec SA
        TransformTable - IPSec Transform table
    Applicable methods: find_data

    Description: IPSec Manager Profile table
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        Profile - IPSec profile name - maximum 32 characters
    Applicable methods: get_keys, get_entries

    Description: IPSec profile name - maximum 32 characters
    Parent objects: 
        ProfileTable
    Keys: 
        Profile (mandatory)
            Type: CryptoNameString
            Description: IPSec profile name
    Value: show_sa_details__
    Applicable methods: get_data

    Description: IPSec SA
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        SecurityAssociation - An IPSec SA Entry
    Applicable methods: get_keys, get_entries

    Description: An IPSec SA Entry
    Parent objects: 
        SecurityAssociationTable
    Keys: 
        ID (mandatory)
            Type: xsd:unsignedInt
            Description: SA ID
    Value: show_sa_details__
    Applicable methods: get_data

    Description: IPSec SA Count
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        SACountNodeTable - IPSec SA Count Node
        SecurityAssociationCountAll - IPSec SA Count All
    Applicable methods: find_data

    Description: IPSec SA Count All
    Parent objects: 
        SecurityAssociationCount
    Value: show_sa_count__
    Applicable methods: get_data

    Description: IPSec SA Count Node
    Parent objects: 
        SecurityAssociationCount
    Child objects: 
        SACountNode - IPSec SA Count Node Entry
    Applicable methods: get_keys, get_entries

    Description: IPSec SA Count Node Entry
    Parent objects: 
        SACountNodeTable
    Keys: 
        Node (mandatory)
            Type: NodeID
            Description: Node
    Value: show_sa_count__
    Applicable methods: get_data

    Description: IPSec summary
    Parent objects: 
        IPSecStaticSessionInfo
    Value: show_sa_brief_details__
    Applicable methods: get_data

    Description: SAs by Peer
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        Peer - An IPSec Peer Entry
    Applicable methods: get_keys

    Description: An IPSec Peer Entry
    Parent objects: 
        PeerTable
    Keys: 
        Address (mandatory)
            Type: IPV4Address
            Description: Peer IPv4 address
    Child objects: 
        PeerFVRFTable - Table of SAs per Peer by FVRF
        PeerPortTable - Table of SAs per Peer by Port
        PeerSAList - SAs per Peer Entry
    Applicable methods: find_data

    Description: SAs per Peer Entry
    Parent objects: 
        Peer
    Value: show_sa_details__
    Applicable methods: get_data

    Description: Table of SAs per Peer by FVRF
    Parent objects: 
        Peer
    Child objects: 
        PeerFVRFEntry - SAs per Peer per FVRF
    Applicable methods: get_keys, get_entries

    Description: SAs per Peer per FVRF
    Parent objects: 
        PeerFVRFTable
    Keys: 
        FVRF (mandatory)
            Type: CryptoNameString
            Description: FVRF
    Value: show_sa_details__
    Applicable methods: get_data

    Description: Table of SAs per Peer by Port
    Parent objects: 
        Peer
    Child objects: 
        PeerPortEntry - SAs per Peer per Port
    Applicable methods: get_keys, get_entries

    Description: SAs per Peer per Port
    Parent objects: 
        PeerPortTable
    Keys: 
        ID (mandatory)
            Type: xsd:unsignedInt
            Description: Port
    Value: show_sa_details__
    Applicable methods: get_data

    Description: SAs by Node ID (location)
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        Node - An IPSec Node Entry
    Applicable methods: get_keys, get_entries

    Description: An IPSec Node Entry
    Parent objects: 
        NodeTable
    Keys: 
        Node (mandatory)
            Type: NodeID
            Description: Node
    Value: show_sa_details__
    Applicable methods: get_data

    Description: SAs by IVRF
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        IVRF - An IPSec IVRF Entry
    Applicable methods: get_keys, get_entries

    Description: An IPSec IVRF Entry
    Parent objects: 
        IVRFTable
    Keys: 
        IVRF (mandatory)
            Type: CryptoNameString
            Description: IVRF
    Value: show_sa_details__
    Applicable methods: get_data

    Description: SAs by FVRF
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        FVRF - An IPSec FVRF Entry
    Applicable methods: get_keys, get_entries

    Description: An IPSec FVRF Entry
    Parent objects: 
        FVRFTable
    Keys: 
        FVRF (mandatory)
            Type: CryptoNameString
            Description: FVRF
    Value: show_sa_details__
    Applicable methods: get_data

    Description: IPSec Interface table
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        Interface - IPSec interface name
    Applicable methods: get_keys, get_entries

    Description: IPSec interface name
    Parent objects: 
        InterfaceTable
    Keys: 
        Interface (mandatory)
            Type: Interface
            Description: IPSec interface name
    Value: show_ipsec_intf_details__
    Applicable methods: get_data

    Description: IPSec Profile table
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        CryptoProfile - IPSec crypto profile name
    Applicable methods: get_keys, get_entries

    Description: IPSec crypto profile name
    Parent objects: 
        CryptoProfileTable
    Keys: 
        Profile (mandatory)
            Type: CryptoNameString
            Description: IPSec profile name
    Value: show_ipsec_profiles__
    Applicable methods: get_data

    Description: IPSec Transform table
    Parent objects: 
        IPSecStaticSessionInfo
    Child objects: 
        TransformSet - IPSec Transform-Set name
    Applicable methods: get_keys, get_entries

    Description: IPSec Transform-Set name
    Parent objects: 
        TransformTable
    Keys: 
        TransformSet (mandatory)
            Type: CryptoNameString
            Description: IPSec Transform-Set name
    Value: show_ipsec_ts__
    Applicable methods: get_data

Perl Data Object Documentation for ipsla_mplslm_def_cfg, version 7. 2.

Objects

    Description: MPLS LSP Monitor definition table
    Parent objects: 
        MPLS_LSPMonitor
    Child objects: 
        Definition - MPLS LSP Monitor definition
    Applicable methods: get_keys, set_data, delete_data

    Description: MPLS LSP Monitor definition
    Parent objects: 
        DefinitionTable
    Keys: 
        MonitorID (mandatory)
            Type: Range. Value lies between 1 and 2048
            Description: Monitor identifier
    Child objects: 
        OperationType - Operation type specification
    Applicable methods: find_data, set_data, delete_data

    Description: Operation type specification
    Parent objects: 
        Definition
    Child objects: 
        MPLS_LSPPing - Perform MPLS LSP Ping operation
        MPLS_LSPTrace - Perform MPLS LSP Trace operation
    Applicable methods: find_data, set_data, delete_data

    Description: Perform MPLS LSP Ping operation
    Parent objects: 
        OperationType
    Child objects: 
        Accesslist - Apply access list to filter PE addresses
        Create - Create MPLSLM instance with specified type
        DataSize - Protocol data size in payload of probe packets
        EXPBits - EXP in MPLS LSP echo request header
        ForceExplicitNull - Forced option for the MPLS LSP operation
        LSPSelector - Attributes used for path selection during LSP load balancing
        OutputInterface - Echo request output interface
        OutputNexthop - Echo request output nexthop
        PathDiscover - Path discover configuration
        Reply - Echo reply options for the MPLS LSP operation
        Scan - Scanning parameters configuration
        Statistics - Statistics collection aggregated over an hour
        TTL - Time to live
        Tag - Add a tag for this MPLSLM instance
        Timeout - Probe/Control timeout interval
        VRF - Specify a VRF instance to be monitored
    Applicable methods: find_data, set_data, delete_data

    Description: Create MPLSLM instance with specified type
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        Create (mandatory)
            Type: xsd:boolean
            Description: Create MPLSLM instance with specified type
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify a VRF instance to be monitored
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        VRFName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: VRF instance name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Apply access list to filter PE addresses
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        ACLName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Access list name
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Scanning parameters configuration
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Child objects: 
        DeleteFactor - Number of times for automatic deletion
        Interval - Time interval for automatic discovery
    Applicable methods: find_data, set_data, delete_data

    Description: Time interval for automatic discovery
    Parent objects: 
        Scan
    Values: 
        IntervalValue (mandatory)
            Type: Range. Value lies between 1 and 70560
            Description: Scan interval in minutes
    Default value: 
        IntervalValue => 240
    Applicable methods: get_data, set_data, delete_data

    Description: Number of times for automatic deletion
    Parent objects: 
        Scan
    Values: 
        FactorValue (mandatory)
            Type: Range. Value lies between 0 and 2147483647
            Description: Scan delete factor value
    Default value: 
        FactorValue => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Protocol data size in payload of probe packets
    Parent objects: 
        MPLS_LSPPing
    Child objects: 
        Request - Payload size in request probe packet
    Applicable methods: find_data, set_data, delete_data

    Description: Payload size in request probe packet
    Parent objects: 
        DataSize
    Values: 
        RequestDataSize (mandatory)
            Type: Range. Value lies between 100 and 17986
            Description: Request data size in bytes
    Default value: 
        RequestDataSize => 100
    Applicable methods: get_data, set_data, delete_data

    Description: Add a tag for this MPLSLM instance
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        Tag (mandatory)
            Type: BoundedString. Length less than or equal to 100
            Description: Tag string
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Probe/Control timeout interval
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        TimeoutValue (mandatory)
            Type: Range. Value lies between 1 and 604800000
            Description: Probe/Control timeout in milliseconds
    Default value: 
        TimeoutValue => 5000
    Applicable methods: get_data, set_data, delete_data

    Description: Attributes used for path selection during LSP load balancing
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        Address (mandatory)
            Type: IPV4Address
            Description: Local host address to use in the echo request
    Default value: 
        Address => 2130706433
    Applicable methods: get_data, set_data, delete_data

    Description: Forced option for the MPLS LSP operation
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Add Explicit Null label to the stack
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Echo reply options for the MPLS LSP operation
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Child objects: 
        DSCPBits - DSCP bits in the reply IP header
        Mode - Configures reply mode parameters
    Applicable methods: find_data, set_data, delete_data

    Description: DSCP bits in the reply IP header
    Parent objects: 
        Reply
    Values: 
        DSCPBitsValue (mandatory)
            Type: IPSLA_LSPReplyDSCP
            Description: DSCP bits value
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configures reply mode parameters
    Parent objects: 
        Reply
    Values: 
        ModeValue (mandatory)
            Type: IPSLA_LSPMonitorReplyMode
            Description: Enables use of router alert in echo reply packets
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Time to live
    Parent objects: 
        MPLS_LSPPing
    Values: 
        TTLValue (mandatory)
            Type: Range. Value lies between 1 and 255
            Description: Time to live value
    Default value: 
        TTLValue => 255
    Applicable methods: get_data, set_data, delete_data

    Description: EXP in MPLS LSP echo request header
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        EXPBitValue (mandatory)
            Type: Range. Value lies between 0 and 7
            Description: EXP bits in MPLS LSP echo request header
    Default value: 
        EXPBitValue => 0
    Applicable methods: get_data, set_data, delete_data

    Description: Echo request output interface
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        Interface (mandatory)
            Type: Interface
            Description: Specify the interface
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Echo request output nexthop
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Values: 
        Nexthop (mandatory)
            Type: IPV4Address
            Description: Specify the nexthop
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Statistics collection aggregated over an hour
    Parent objects: 
        MPLS_LSPPing
        MPLS_LSPTrace
    Child objects: 
        Hours - Number of hours for which hourly statistics are kept
    Applicable methods: find_data, set_data, delete_data

    Description: Number of hours for which hourly statistics are kept
    Parent objects: 
        Statistics
    Values: 
        HoursCount (mandatory)
            Type: Range. Value lies between 0 and 2
            Description: Specify number of hours
    Default value: 
        HoursCount => 2
    Applicable methods: get_data, set_data, delete_data

    Description: Path discover configuration
    Parent objects: 
        MPLS_LSPPing
    Child objects: 
        Create - Create LPD instance
        Echo - Echo parameters configuration
        Path - Path parameters configuration
        ScanPeriod - Time period for finishing path discovery
        Session - Session parameters configuration
    Applicable methods: find_data, set_data, delete_data

    Description: Create LPD instance
    Parent objects: 
        PathDiscover
    Values: 
        Create (mandatory)
            Type: xsd:boolean
            Description: Create LPD instance
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Session parameters configuration
    Parent objects: 
        PathDiscover
    Child objects: 
        Limit - Number of concurrent active path discovery requests at one time
        Timeout - Timeout value for path discovery request
    Applicable methods: find_data, set_data, delete_data

    Description: Number of concurrent active path discovery requests at one time
    Parent objects: 
        Session
    Values: 
        SessionCount (mandatory)
            Type: Range. Value lies between 1 and 15
            Description: Number of requests
    Default value: 
        SessionCount => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Timeout value for path discovery request
    Parent objects: 
        Session
    Values: 
        TimeoutValue (mandatory)
            Type: Range. Value lies between 1 and 900
            Description: Timeout value in seconds
    Default value: 
        TimeoutValue => 120
    Applicable methods: get_data, set_data, delete_data

    Description: Time period for finishing path discovery
    Parent objects: 
        PathDiscover
    Values: 
        PeriodValue (mandatory)
            Type: Range. Value lies between 0 and 7200
            Description: Time period value in minutes
    Default value: 
        PeriodValue => 5
    Applicable methods: get_data, set_data, delete_data

    Description: Path parameters configuration
    Parent objects: 
        PathDiscover
    Child objects: 
        Retry - Number of attempts before declaring the path as down
        SecondaryFrequency - Frequency to be used if path failure condition is detected
    Applicable methods: find_data, set_data, delete_data

    Description: Number of attempts before declaring the path as down
    Parent objects: 
        Path
    Values: 
        RetryCount (mandatory)
            Type: Range. Value lies between 1 and 16
            Description: Retry count
    Default value: 
        RetryCount => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Frequency to be used if path failure condition is detected
    Parent objects: 
        Path
    Values: 
        Type (mandatory)
            Type: IPSLASecondaryFrequencyType
            Description: Condition type of path failure
        Frequency (mandatory)
            Type: Range. Value lies between 1 and 604800
            Description: Frequency value in seconds
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Echo parameters configuration
    Parent objects: 
        PathDiscover
    Child objects: 
        Interval - Send interval between echo requests during path discovery
        MaximumLSPSelector - Maximum IPv4 address used as destination in echo request
        Multipath - Downstream map multipath settings
        Retry - Number of timeout retry attempts during path discovery
        Timeout - Timeout value for echo requests during path discovery
    Applicable methods: find_data, set_data, delete_data

    Description: Send interval between echo requests during path discovery
    Parent objects: 
        Echo
    Values: 
        IntervalValue (mandatory)
            Type: Range. Value lies between 0 and 3600000
            Description: Interval time in milliseconds
    Default value: 
        IntervalValue => 0
    Applicable methods: get_data, set_data, delete_data

    Description: Timeout value for echo requests during path discovery
    Parent objects: 
        Echo
    Values: 
        TimeoutValue (mandatory)
            Type: Range. Value lies between 1 and 3600
            Description: Timeout value in seconds
    Default value: 
        TimeoutValue => 5
    Applicable methods: get_data, set_data, delete_data

    Description: Number of timeout retry attempts during path discovery
    Parent objects: 
        Echo
    Values: 
        RetryCount (mandatory)
            Type: Range. Value lies between 0 and 10
            Description: Retry count
    Default value: 
        RetryCount => 3
    Applicable methods: get_data, set_data, delete_data

    Description: Downstream map multipath settings
    Parent objects: 
        Echo
    Child objects: 
        BitmapSize - Multipath bit size
    Applicable methods: find_data, set_data, delete_data

    Description: Multipath bit size
    Parent objects: 
        Multipath
    Values: 
        BitmapSizeValue (mandatory)
            Type: Range. Value lies between 1 and 256
            Description: Bitmap size
    Default value: 
        BitmapSizeValue => 32
    Applicable methods: get_data, set_data, delete_data

    Description: Maximum IPv4 address used as destination in echo request
    Parent objects: 
        Echo
    Values: 
        Address (mandatory)
            Type: IPV4Address
            Description: Local host address to use as maximum value
    Default value: 
        Address => 2147483647
    Applicable methods: get_data, set_data, delete_data

    Description: Perform MPLS LSP Trace operation
    Parent objects: 
        OperationType
    Child objects: 
        Accesslist - Apply access list to filter PE addresses
        Create - Create MPLSLM instance with specified type
        EXPBits - EXP in MPLS LSP echo request header
        ForceExplicitNull - Forced option for the MPLS LSP operation
        LSPSelector - Attributes used for path selection during LSP load balancing
        OutputInterface - Echo request output interface
        OutputNexthop - Echo request output nexthop
        Reply - Echo reply options for the MPLS LSP operation
        Scan - Scanning parameters configuration
        Statistics - Statistics collection aggregated over an hour
        TTL - Time to live
        Tag - Add a tag for this MPLSLM instance
        Timeout - Probe/Control timeout interval
        VRF - Specify a VRF instance to be monitored
    Applicable methods: find_data, set_data, delete_data

    Description: Time to live
    Parent objects: 
        MPLS_LSPTrace
    Values: 
        TTLValue (mandatory)
            Type: Range. Value lies between 1 and 255
            Description: Time to live value
    Default value: 
        TTLValue => 30
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'IPV4_UDPRouterAlert' - Send replies via IPv4 UDP packets with Router Alert option

    Definition: Enumeration. Valid values are: 
        'ConnectionLoss' - Enable secondary frequency for connection loss
        'Timeout' - Enable secondary frequency for timeout
        'Both' - Enable secondary frequency for timeout and connection loss

    Description: LACP action commands
    Task IDs required: bundle
    Parent objects: 
        Action
    Child objects: 
        MemberTable - Table of LACP bundle member interfaces
    Applicable methods: set_data

    Description: Table of LACP bundle member interfaces
    Parent objects: 
        LACPBundleMembers
    Child objects: 
        Member - Member interface
    Applicable methods: set_data

    Description: Member interface
    Parent objects: 
        MemberTable
    Keys: 
        MemberInterface (mandatory)
            Type: Interface
            Description: Member interface
    Child objects: 
        ClearCounters - Clear LACP counters for a member interface
    Applicable methods: set_data

    Description: Clear LACP counters for a member interface
    Parent objects: 
        Member
    Values: 
        ClearCounters (mandatory)
            Type: xsd:boolean
            Description: Clear the LACP counters
    Default value: none.
    Applicable methods: set_data

Perl Data Object Documentation for isis_action, version 5. 1.

Objects

    Description: IS-IS action data
    Task IDs required: isis
    Parent objects: 
        Action
    Child objects: 
        InstanceTable - IS-IS instance action data
    Applicable methods: set_data

    Description: IS-IS instance action data
    Parent objects: 
        ISIS
    Child objects: 
        Instance - Action data for a single IS-IS instance
    Applicable methods: set_data

    Description: Action data for a single IS-IS instance
    Parent objects: 
        InstanceTable
    Keys: 
        InstanceID (mandatory)
            Type: ISISInstanceNameType
            Description: Instance identifier
    Child objects: 
        ClearAllInterfaceStatistics - Clear IS-IS statistics data
        ClearAllRoutes - Clear IS-IS route data
        ClearInterfaceStatisticsTable - Clear Interface statistics
        ClearProcess - Clear all information from an IS-IS instance (soft reset)
        ClearTopoRoutesTable - Clear IS-IS topology route data
    Applicable methods: set_data

    Description: Clear all information from an IS-IS instance (soft reset)
    Parent objects: 
        Instance
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Value ignored
    Default value: none.
    Applicable methods: set_data

    Description: Clear IS-IS statistics data
    Parent objects: 
        Instance
    Child objects: 
        Trigger - Clear all statistics data from all interfaces.
    Applicable methods: set_data

    Description: Clear all statistics data from all interfaces.
    Parent objects: 
        ClearAllInterfaceStatistics
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Value ignored
    Default value: none.
    Applicable methods: set_data

    Description: Clear Interface statistics
    Parent objects: 
        Instance
    Child objects: 
        ClearInterfaceStatistics - Clear statistics data for one IS-IS interface
    Applicable methods: set_data

    Description: Clear statistics data for one IS-IS interface
    Parent objects: 
        ClearInterfaceStatisticsTable
    Keys: 
        Interface (mandatory)
            Type: Interface
            Description: Interface name
    Child objects: 
        Trigger - Clear all statistics data from an interface.
    Applicable methods: set_data

    Description: Clear all statistics data from an interface.
    Parent objects: 
        ClearInterfaceStatistics
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Value ignored
    Default value: none.
    Applicable methods: set_data

    Description: Clear IS-IS route data
    Parent objects: 
        Instance
    Child objects: 
        Trigger - Clear all routes from all toplogies.
    Applicable methods: set_data

    Description: Clear all routes from all toplogies.
    Parent objects: 
        ClearAllRoutes
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Value ignored
    Default value: none.
    Applicable methods: set_data

    Description: Clear IS-IS topology route data
    Parent objects: 
        Instance
    Child objects: 
        ClearTopoRoutes - Clear routes relating to a single IS-IS topology
    Applicable methods: set_data

    Description: Clear routes relating to a single IS-IS topology
    Parent objects: 
        ClearTopoRoutesTable
    Keys: 
        AF
            Type: ISISAddressFamily
            Description: Address-family
        SubAF
            Type: ISISSubAddressFamily
            Description: Sub-address-family
        TopoName
            Type: ISISTopologyName
            Description: Topology Name
    Child objects: 
        IPV4Routes - IPv4 local route
        IPV6Routes - IPv6 local route
    Applicable methods: set_data

    Description: IPv4 local route
    Parent objects: 
        ClearTopoRoutes
    Child objects: 
        Trigger - Clear all routes from IPv4 toplogy.
    Applicable methods: set_data

    Description: Clear all routes from IPv4 toplogy.
    Parent objects: 
        IPV4Routes
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Value ignored
    Default value: none.
    Applicable methods: set_data

    Description: IPv6 local route
    Parent objects: 
        ClearTopoRoutes
    Child objects: 
        Trigger - Clear all routes from IPv6 toplogy.
    Applicable methods: set_data

    Description: Clear all routes from IPv6 toplogy.
    Parent objects: 
        IPV6Routes
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Value ignored
    Default value: none.
    Applicable methods: set_data

Perl Data Object Documentation for ip_ntp_oper, version 5. 0.

Objects

    Description: NTP operational data
    Task IDs required: ip-services
    Parent objects: 
        Operational
    Child objects: 
        NodeTable - Node-specific NTP operational data
    Applicable methods: find_data

    Description: Node-specific NTP operational data
    Parent objects: 
        NTP
    Child objects: 
        Node - NTP operational data for a particular node
    Applicable methods: get_keys

    Description: NTP operational data for a particular node
    Parent objects: 
        NodeTable
    Keys: 
        Node (mandatory)
            Type: NodeID
            Description: The node identifier
    Child objects: 
        Associations - NTP Associations information
        AssociationsDetail - NTP Associations Detail information
        Status - Status of NTP peer(s)
    Applicable methods: find_data

    Description: Status of NTP peer(s)
    Parent objects: 
        Node
    Value: ntp_edm_status_result
    Applicable methods: get_data

    Description: NTP Associations information
    Parent objects: 
        Node
    Value: ntp_edm_assoc_summary_result
    Applicable methods: get_data

    Description: NTP Associations Detail information
    Parent objects: 
        Node
    Value: ntp_edm_assoc_detail_result
    Applicable methods: get_data

Perl Data Object Documentation for l2vpn_oper, version 6. 0.

Objects

    Description: L2VPN operational data
    Task IDs required: l2vpn
    Parent objects: 
        Operational
    Child objects: 
        BridgeACTable - Bridge Domain Attachment Circuit Table
        BridgeAccessPWTable - Bridge Domain Access Pseudowire Table
        BridgeDomainTable - Bridge Domain Table
        BridgeHardwareTable - Bridge Domain Hardware Table
        BridgePWTable - Bridge Domain Pseudowire Table
        BridgeSummary - Bridge summary information
        L2VPNCollaborators - L2VPN collaborator information
        L2VPNResourceState - L2VPN resource state information
        MSTPPortTable - L2VPN MSTP Port Table
        MSTPVlanTable - L2VPN MSTP VLAN Table
        PseudowireClassTable - List of pseudowire classes
        XConnectSummary - XConnect summary information
        XConnectTable - XConnect Table
    Applicable methods: find_data

    Description: XConnect Table
    Parent objects: 
        L2VPN
    Child objects: 
        XConnect - XConnect information
    Applicable filters: 
        L2VPNInterfaceFilter
        L2VPNPseudowireFilter
        L2VPNXConnectTypeFilter
        L2VPNXConnectStateFilter
        L2VPNEncapsulationTypeFilter
        L2VPNPseudowireClassFilter
    Applicable methods: get_keys, get_entries

    Description: XConnect information
    Parent objects: 
        XConnectTable
    Keys: 
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: XConnect Group
        XConnectName
            Type: BoundedString. Length less than or equal to 32
            Description: XConnect Name
    Value: l2vpn_xc
    Applicable methods: get_data

    Description: XConnect summary information
    Parent objects: 
        L2VPN
    Value: l2vpn_xc_summary
    Applicable methods: get_data

    Description: L2VPN collaborator information
    Parent objects: 
        L2VPN
    Value: l2vpn_global_info
    Applicable methods: get_data

    Description: L2VPN resource state information
    Parent objects: 
        L2VPN
    Value: l2vpn_resource_state
    Applicable methods: get_data

    Description: List of pseudowire classes
    Parent objects: 
        L2VPN
    Child objects: 
        PseudowireClass - Pseudowire class information
    Applicable methods: get_keys, get_entries

    Description: Pseudowire class information
    Parent objects: 
        PseudowireClassTable
    Keys: 
        PseudowireClassName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Pseudowire Class Name
    Value: l2vpn_pw_class
    Applicable methods: get_data

    Description: Bridge Domain Table
    Parent objects: 
        L2VPN
    Child objects: 
        BridgeDomain - Bridge Domain information
    Applicable filters: 
        L2VPNInterfaceFilter
        L2VPNBridgeGroupFilter
        L2VPNBridgePseudowireFilter
    Applicable methods: get_keys, get_entries

    Description: Bridge Domain information
    Parent objects: 
        BridgeDomainTable
    Keys: 
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2vpn_bridge
    Applicable methods: get_data

    Description: Bridge Domain Attachment Circuit Table
    Parent objects: 
        L2VPN
    Child objects: 
        BridgeAC - Bridge Domain Attachment Circuit
    Applicable filters: 
        L2VPNBridgeFilter
    Applicable methods: get_keys, get_entries

    Description: Bridge Domain Attachment Circuit
    Parent objects: 
        BridgeACTable
    Keys: 
        Interface (mandatory)
            Type: Interface
            Description: Interface
    Value: l2vpn_bd_ac
    Applicable methods: get_data

    Description: Bridge Domain Pseudowire Table
    Parent objects: 
        L2VPN
    Child objects: 
        BridgePW - Bridge Domain Pseudowire information
    Applicable filters: 
        L2VPNBridgeFilter
        L2VPNBridgeVFIFilter
        L2VPNBridgePeerIdFilter
    Applicable methods: get_keys, get_entries

    Description: Bridge Domain Pseudowire information
    Parent objects: 
        BridgePWTable
    Keys: 
        Neighbor
            Type: IPAddress
            Description: Neighbor IP address
        PseudowireID
            Type: Range. Value lies between 1 and -1
            Description: Pseudowire ID
    Value: l2vpn_bd_pw
    Applicable methods: get_data

    Description: Bridge Domain Access Pseudowire Table
    Parent objects: 
        L2VPN
    Child objects: 
        BridgeAccessPW - Bridge Domain Access Pseudowire
    Applicable filters: 
        L2VPNBridgeFilter
        L2VPNBridgePeerIdFilter
    Applicable methods: get_keys, get_entries

    Description: Bridge Domain Access Pseudowire
    Parent objects: 
        BridgeAccessPWTable
    Keys: 
        Neighbor
            Type: IPAddress
            Description: Neighbor IP address
        PseudowireID
            Type: Range. Value lies between 1 and -1
            Description: Pseudowire  ID
    Value: l2vpn_bd_pw
    Applicable methods: get_data

    Description: Bridge summary information
    Parent objects: 
        L2VPN
    Value: l2vpn_bridge_summary
    Applicable methods: get_data

    Description: Bridge Domain Hardware Table
    Parent objects: 
        L2VPN
    Child objects: 
        BridgeHardware - Bridge Domain Hardware information
    Applicable filters: 
        L2VPNInterfaceFilter
        L2VPNBridgeGroupFilter
        L2VPNBridgePseudowireFilter
    Applicable methods: get_keys, get_entries

    Description: Bridge Domain Hardware information
    Parent objects: 
        BridgeHardwareTable
    Keys: 
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2vpn_bridge_hw
    Applicable methods: get_data

    Description: L2VPN MSTP Port Table
    Parent objects: 
        L2VPN
    Child objects: 
        MSTPPort - MSTP Port information
    Applicable filters: 
        L2VPN_MSTPMstiFilter
    Applicable methods: get_keys, get_entries

    Description: MSTP Port information
    Parent objects: 
        MSTPPortTable
    Keys: 
        Interface (mandatory)
            Type: Interface
            Description: Interface
    Value: l2vpn_mstp_port
    Applicable methods: get_data

    Description: L2VPN MSTP VLAN Table
    Parent objects: 
        L2VPN
    Child objects: 
        MSTPVlan - MSTP Port information
    Applicable filters: 
        L2VPN_MSTPMstiFilter
        L2VPN_MSTPInterfaceFilter
    Applicable methods: get_keys, get_entries

    Description: MSTP Port information
    Parent objects: 
        MSTPVlanTable
    Keys: 
        VlanID (mandatory)
            Type: Range. Value lies between 0 and 4097
            Description: vlan id
    Value: l2vpn_mstp_vlan
    Applicable methods: get_data

    Description: Show L2VPN forwarding
    Task IDs required: l2vpn
    Parent objects: 
        Operational
    Child objects: 
        NodeTable - Per node L2VPN forwarding Operational data
    Applicable methods: find_data

    Description: Per node L2VPN forwarding Operational data
    Parent objects: 
        L2VPNForwarding
    Child objects: 
        Node - The L2VPN forwarding Operational data for a particular node
    Applicable methods: get_keys

    Description: The L2VPN forwarding Operational data for a particular node
    Parent objects: 
        NodeTable
    Keys: 
        NodeID (mandatory)
            Type: NodeID
            Description: The identifier for the node
    Child objects: 
        L2FIBBridgeDomainDetailTable - Bridge Domain forwarding detail
        L2FIBBridgeDomainNameTable - Bridge Domain forwarding detail
        L2FIBBridgeDomainPortTable - Bridge Port forwarding detail
        L2FIBMACDetailTable - Bridge MAC detail information
        L2FIBMACHardwareEgressTable - Bridge Hardware Egress information
        L2FIBMACHardwareIngressTable - Bridge Hardware Ingress information
        L2FIBMACIFDetailTable - Bridge MAC Detail information
        L2FIBMACIFHardwareEgressTable - Bridge Hardware Egress information
        L2FIBMACIFHardwareIngressTable - Bridge Hardware Ingress information
        L2FIBSummary - L2FIB Summary information
        L2FIB_BDPortHWEgressTable - Bridge Port forwarding detail
        L2FIB_BDPortHWIngressTable - Bridge Port forwarding detail
        L2FIB_MSTP_DetailTable - MSTP Detail Table
        L2FIB_MSTP_SummaryTable - MSTP Summary Table
    Applicable methods: find_data

    Description: Bridge Domain forwarding detail
    Parent objects: 
        Node
    Child objects: 
        L2FIBBridgeDomainName - Specify Bridge Domain Name
    Applicable filters: 
        L2FIBBridgeDomainInterfaceFilter
        L2FIBBridgeDomainPseudowireFilter
    Applicable methods: get_keys, get_entries

    Description: Specify Bridge Domain Name
    Parent objects: 
        L2FIBBridgeDomainNameTable
    Keys: 
        BDGroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Name of the Bridge group
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_summary_info
    Applicable methods: get_data

    Description: Bridge Domain forwarding detail
    Parent objects: 
        Node
    Child objects: 
        L2FIBBridgeDomain - Specify Bridge Domain Name
    Applicable filters: 
        L2FIBBridgeDomainInterfaceFilter
        L2FIBBridgeDomainPseudowireFilter
    Applicable methods: get_keys, get_entries

    Description: Specify Bridge Domain Name
    Parent objects: 
        L2FIBBridgeDomainDetailTable
    Keys: 
        BDGroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Name of the Bridge group
        BdName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_info
    Applicable methods: get_data

    Description: Bridge Port forwarding detail
    Parent objects: 
        Node
    Child objects: 
        L2FIBBridgePort - Specify Bridge Domain Name and XC ID
    Applicable filters: 
        L2FIBBridgeDomainNameFilter
        L2FIBBridgeDomainInterfaceFilter
        L2FIBBridgeDomainPseudowireFilter
    Applicable methods: get_keys, get_entries

    Description: Specify Bridge Domain Name and XC ID
    Parent objects: 
        L2FIBBridgeDomainPortTable
    Keys: 
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        BDName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
        XCUintID
            Type: HexInteger
            Description: XC ID
    Value: l2fib_bridge_port_detail_info
    Applicable methods: get_data

    Description: Bridge Port forwarding detail
    Parent objects: 
        Node
    Child objects: 
        L2FIB_BDPortHWIngress - Specify Bridge Domain Name and XC ID
    Applicable filters: 
        L2FIBBridgeDomainNameFilter
        L2FIBBridgeDomainInterfaceFilter
        L2FIBBridgeDomainPseudowireFilter
    Applicable methods: get_keys, get_entries

    Description: Specify Bridge Domain Name and XC ID
    Parent objects: 
        L2FIB_BDPortHWIngressTable
    Keys: 
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Bdname
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
        XcUintID
            Type: HexInteger
            Description: XC ID
    Value: l2fib_bridge_port_detail_info
    Applicable methods: get_data

    Description: Bridge Port forwarding detail
    Parent objects: 
        Node
    Child objects: 
        L2FIB_BDPortHWEgress - Specify Bridge Domain Name and XC ID
    Applicable filters: 
        L2FIBBridgeDomainNameFilter
        L2FIBBridgeDomainInterfaceFilter
        L2FIBBridgeDomainPseudowireFilter
    Applicable methods: get_keys, get_entries

    Description: Specify Bridge Domain Name and XC ID
    Parent objects: 
        L2FIB_BDPortHWEgressTable
    Keys: 
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        BridgeName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
        XconnectUintID
            Type: HexInteger
            Description: XC ID
    Value: l2fib_bridge_port_detail_info
    Applicable methods: get_data

    Description: Bridge MAC detail information
    Parent objects: 
        Node
    Child objects: 
        L2FIBMACDetail - MAC Detail information
    Applicable filters: 
        L2FIBBridgeDomainNameFilter
        L2FIBMACFilter
    Applicable methods: get_keys, get_entries

    Description: MAC Detail information
    Parent objects: 
        L2FIBMACDetailTable
    Keys: 
        Address
            Type: MACAddress
            Description: Static MAC address
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_mac_info
    Applicable methods: get_data

    Description: Bridge Hardware Ingress information
    Parent objects: 
        Node
    Child objects: 
        L2FIBMACHardwareIngress - MAC Hardware Ingress information
    Applicable filters: 
        L2FIBBridgeDomainNameFilter
        L2FIBMACFilter
    Applicable methods: get_keys, get_entries

    Description: MAC Hardware Ingress information
    Parent objects: 
        L2FIBMACHardwareIngressTable
    Keys: 
        Address
            Type: MACAddress
            Description: Static MAC address
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_mac_info
    Applicable methods: get_data

    Description: Bridge Hardware Egress information
    Parent objects: 
        Node
    Child objects: 
        L2FIBMACHardwareEgress - MAC Hardware Egress information
    Applicable filters: 
        L2FIBBridgeDomainNameFilter
        L2FIBMACFilter
    Applicable methods: get_keys, get_entries

    Description: MAC Hardware Egress information
    Parent objects: 
        L2FIBMACHardwareEgressTable
    Keys: 
        Address
            Type: MACAddress
            Description: Static MAC address
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_mac_info
    Applicable methods: get_data

    Description: Bridge MAC Detail information
    Parent objects: 
        Node
    Child objects: 
        L2FIBMACIFDetail - MAC Detail information
    Applicable filters: 
        L2FIBBridgeDomainInterfaceFilter
    Applicable methods: get_keys, get_entries

    Description: MAC Detail information
    Parent objects: 
        L2FIBMACIFDetailTable
    Keys: 
        Address
            Type: MACAddress
            Description: Static MAC address
        XcUintID
            Type: HexInteger
            Description: XC ID
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_mac_info
    Applicable methods: get_data

    Description: Bridge Hardware Ingress information
    Parent objects: 
        Node
    Child objects: 
        L2FIBMACIFHardwareIngress - MAC Hardware Ingress information
    Applicable filters: 
        L2FIBBridgeDomainInterfaceFilter
    Applicable methods: get_keys, get_entries

    Description: MAC Hardware Ingress information
    Parent objects: 
        L2FIBMACIFHardwareIngressTable
    Keys: 
        Address
            Type: MACAddress
            Description: Static MAC address
        XcUintID
            Type: HexInteger
            Description: XC ID
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_mac_info
    Applicable methods: get_data

    Description: Bridge Hardware Egress information
    Parent objects: 
        Node
    Child objects: 
        L2FIBMACIFHardwareEgress - MAC Hardware Egress information
    Applicable filters: 
        L2FIBBridgeDomainInterfaceFilter
    Applicable methods: get_keys, get_entries

    Description: MAC Hardware Egress information
    Parent objects: 
        L2FIBMACIFHardwareEgressTable
    Keys: 
        Address
            Type: MACAddress
            Description: Static MAC address
        XcUintID
            Type: HexInteger
            Description: XC ID
        GroupName
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name
        Name
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Domain Name
    Value: l2fib_bridge_mac_info
    Applicable methods: get_data

    Description: L2FIB Summary information
    Parent objects: 
        Node
    Value: l2fib_summary_info
    Applicable methods: get_data

    Description: MSTP Summary Table
    Parent objects: 
        Node
    Child objects: 
        L2FIB_MSTP_Summary - MSTP Summary information
    Applicable filters: 
        L2FIB_MSTP_Filter
    Applicable methods: get_keys, get_entries

    Description: MSTP Summary information
    Parent objects: 
        L2FIB_MSTP_SummaryTable
    Keys: 
        ParentInterface
            Type: Interface
            Description: Parent interface context
        MSTI
            Type: xsd:unsignedInt
            Description: MSTI context
    Value: l2fib_main_port_mstp_summary_info
    Applicable methods: get_data

    Description: MSTP Detail Table
    Parent objects: 
        Node
    Child objects: 
        L2FIB_MSTP_Detail - MSTP Detail information
    Applicable filters: 
        L2FIB_MSTP_Filter
    Applicable methods: get_keys, get_entries

    Description: MSTP Detail information
    Parent objects: 
        L2FIB_MSTP_DetailTable
    Keys: 
        ParentInterface
            Type: Interface
            Description: Parent interface context
        MSTI
            Type: xsd:unsignedInt
            Description: MSTI context
    Value: l2fib_main_port_mstp_detail_info
    Applicable methods: get_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'LocallySwitched' - Locally switched
        'AttachmentCircuit2Pseudowire' - Attachment circuit to pseudowire

    Definition: Enumeration. Valid values are: 
        'Unresolved' - XConnect state is unresolved
        'Down' - XConnect state is down
        'Up' - XConnect state is up

    Definition: Enumeration. Valid values are: 
        'MPLS' - MPLS encapsulation
        'L2TPv3' - L2TPv3 encapsulation

    Description: Interface match
    Parameters: 
        Interface (mandatory)
            Type: Interface
            Description: Interface

    Description: Match locally switched or attachment circuit to pseudowire
    Parameters: 
        XConnectType (mandatory)
            Type: XConnectTypeType
            Description: XConnect

    Description: Neighbor and Pseudowire ID match
    Parameters: 
        Neighbor
            Type: IPAddress
            Description: Neighbor IP address
        PseudowireID
            Type: Range. Value lies between 1 and -1
            Description: Pseudowire ID

    Description: XConnect state match
    Parameters: 
        XConnectState (mandatory)
            Type: XConnectStateType
            Description: XConnect state

    Description: Encapsulation type match
    Parameters: 
        Encapsulation (mandatory)
            Type: EncapsulationType
            Description: Encapsulation

    Description: Pseudowire class match
    Parameters: 
        PseudowireClass (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Pseudowire class

    Description: Interface match
    Parameters: 
        Interface (mandatory)
            Type: Interface
            Description: Interface

    Description: Neighbor and Pseudowire ID match
    Parameters: 
        NeighborName
            Type: IPAddress
            Description: Neighbor IP address
        PseudowireId
            Type: Range. Value lies between 1 and -1
            Description: Pseudowire ID

    Description: Bridge Name match
    Parameters: 
        BD_Name (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Name of the  bridge domain

    Description: MAC Address match
    Parameters: 
        Address (mandatory)
            Type: MACAddress
            Description: Static MAC address

    Description: Bridge Name match
    Parameters: 
        Name (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Name of the bridge domain

    Description: Neighbor and Pseudowire ID match
    Parameters: 
        Neighbor
            Type: IPAddress
            Description: Neighbor IP address
        PseudowireID
            Type: Range. Value lies between 1 and -1
            Description: Pseudowire ID

    Description: Peer ID match
    Parameters: 
        Neighbor (mandatory)
            Type: IPAddress
            Description: Neighbor IP address

    Description: Virtual Forwarding Interface match
    Parameters: 
        Name (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Name of the Virtual Forwarding Interface

    Description: Bridge Group Name match
    Parameters: 
        GroupName (mandatory)
            Type: BoundedString. Length less than or equal to 32
            Description: Bridge Group Name

    Description: MSTI ID match
    Parameters: 
        Msti (mandatory)
            Type: Range. Value lies between 0 and 64
            Description: MSTI ID

    Description: Interface match
    Parameters: 
        Interface (mandatory)
            Type: Interface
            Description: Interface

    Description: L2FIB MSTP Filter
    Parameters: 
        ParentInterface
            Type: Interface
            Description: Parent interface
        MSTI
            Type: xsd:unsignedInt
            Description: MSTI

Perl Data Object Documentation for ipv4_dhcpd_cfg, version 2. 2.

Objects

    Description: Dhcp Ipv4 configuration
    Task IDs required: ip-services
    Parent objects: 
        Configuration
    Child objects: 
        DHCPIPV4 - Dhcp Ipv4 configuration
        InterfaceTable - Dhcp Ipv4 Interface Table
        ProfileTable - Dhcp Ipv4 Profile Table
        VrfTable - Vrf Table
    Applicable methods: find_data, set_data, delete_data

    Description: Dhcp Ipv4 configuration
    Parent objects: 
        IPV4DHCPD
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: dhcp ipv4 is enabled
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Dhcp Ipv4 Interface Table
    Parent objects: 
        IPV4DHCPD
    Child objects: 
        Interface - Dhcp Ipv4 Interface
    Applicable methods: get_keys, set_data, delete_data

    Description: Dhcp Ipv4 Interface
    Parent objects: 
        InterfaceTable
    Keys: 
        IntfName (mandatory)
            Type: Interface
            Description: Interface Name
    Child objects: 
        None - Disable Dhcp Ipv4
        Profile - Profile name and mode
    Applicable methods: find_data, set_data, delete_data

    Description: Profile name and mode
    Parent objects: 
        Interface
    Values: 
        ProfileName (mandatory)
            Type: xsd:string
            Description: Profile name
        Mode (mandatory)
            Type: IPV4DHCPDModeType
            Description: Dhcp mode
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Disable Dhcp Ipv4
    Parent objects: 
        Interface
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Dhcp Ipv4 disabled
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Vrf Table
    Parent objects: 
        IPV4DHCPD
    Child objects: 
        Vrf - VRF table
    Applicable methods: get_keys, set_data, delete_data

    Description: VRF table
    Parent objects: 
        VrfTable
    Keys: 
        VrfName (mandatory)
            Type: xsd:string
            Description: VRF Name
    Child objects: 
        Profile - Profile name and mode
    Applicable methods: find_data, set_data, delete_data

    Description: Profile name and mode
    Parent objects: 
        Vrf
    Values: 
        VRFProfileName (mandatory)
            Type: xsd:string
            Description: Profile name
        Mode (mandatory)
            Type: IPV4DHCPDModeType
            Description: Dhcp mode
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Dhcp Ipv4 Profile Table
    Parent objects: 
        IPV4DHCPD
    Child objects: 
        Profile - Dhcp Ipv4 Profile
    Applicable methods: get_keys, set_data, delete_data

    Description: Dhcp Ipv4 Profile
    Parent objects: 
        ProfileTable
    Keys: 
        ProfileName (mandatory)
            Type: xsd:string
            Description: Profile Name
    Child objects: 
        ProfileMode - Dhcp Ipv4 Profile mode
    Applicable methods: get_keys, set_data, delete_data

    Description: Dhcp Ipv4 Profile mode
    Parent objects: 
        Profile
    Keys: 
        Mode (mandatory)
            Type: IPV4DHCPDModeType
            Description: Dhcp Ipv4 Profile mode
    Child objects: 
        Mode - Dhcp Ipv4 Profile mode
        Proxy - Dhcp Proxy profile
        Relay - Dhcp Relay profile
        Snoop - Dhcp Snoop profile
    Applicable methods: find_data, set_data, delete_data

    Description: Dhcp Ipv4 Profile mode
    Parent objects: 
        ProfileMode
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: Dhcp Ipv4 profile
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for crypto_ipsec_common, version 0. 0.

Datatypes

    Definition: Enumeration. Valid values are: 
        'DFBitCopy' - Copy (default for global config)
        'DFBitClear' - Clear
        'DFBitSet' - Set

    Definition: Enumeration. Valid values are: 
        'WinSize64' - Window size of 64 (default)
        'WinSize128' - Window size of 128
        'WinSize256' - Window size of 256
        'WinSize512' - Window size of 512
        'WinSize1024' - Window size of 1024

    Definition: Enumeration. Valid values are: 
        'PFS1' - Diffie-Hellman Group 1
        'PFS2' - Diffie-Hellman Group 2
        'PFS5' - Diffie-Hellman Group 5

    Definition: Enumeration. Valid values are: 
        'Static' - IPSec Static Profile
        'Dynamic' - IPSec Dynamic Profile

    Definition: BoundedString. Length less than or equal to 32

    Definition: Range. Value lies between 600 and 86400

    Definition: Range. Value lies between 2560 and 4194303

    Definition: Range. Value lies between 120 and 86400

    Definition: Range. Value lies between 256 and -1

    Definition: Range. Value lies between 1 and 255

    Definition: Range. Value lies between 1 and 497777

    Definition: Range. Value lies between 2 and 16000

    Description: Global QOS configuration.
    Task IDs required: qos
    Parent objects: 
        Configuration
    Child objects: 
        FabricServicePolicy - Global fabric service policy.
    Applicable methods: find_data, set_data, delete_data

    Description: Global fabric service policy.
    Parent objects: 
        QOS
    Values: 
        Name (mandatory)
            Type: BoundedString. Length less than or equal to 63
            Description: Name of the fabric service policy
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Datatypes

    Definition: xsd:boolean

Perl Data Object Documentation for ip_tcp_sso_oper, version 2. 1.

Objects

    Description: TCP NSR operational data
    Task IDs required: transport
    Parent objects: 
        Operational
    Child objects: 
        NodeTable - Table of information about all nodes present on the system
    Applicable methods: find_data

    Description: Table of information about all nodes present on the system
    Parent objects: 
        TCP_NSR
    Child objects: 
        Node - Information about a single node
    Applicable methods: get_keys

    Description: Information about a single node
    Parent objects: 
        NodeTable
    Keys: 
        ID (mandatory)
            Type: NodeID
            Description: Describing a location
    Child objects: 
        Client - Information about TCP NSR Client
        Session - Information about TCP NSR Sessions
        SessionSet - Information about TCP NSR Session Sets
        Statistics - Statis Information about TCP NSR connections
    Applicable methods: find_data

    Description: Information about TCP NSR Client
    Parent objects: 
        Node
    Child objects: 
        BriefClientTable - Information about TCP NSR Client
        DetailClientTable - Table about TCP NSR Client details
    Applicable methods: find_data

    Description: Information about TCP NSR Client
    Parent objects: 
        Client
    Child objects: 
        BriefClient - Brief information about NSR Client
    Applicable methods: get_keys, get_entries

    Description: Brief information about NSR Client
    Parent objects: 
        BriefClientTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR client
    Value: tcp_nsr_ccb_brief_bag
    Applicable methods: get_data

    Description: Table about TCP NSR Client details
    Parent objects: 
        Client
    Child objects: 
        DetailClient - showing detailed information of NSR Clients
    Applicable methods: get_keys, get_entries

    Description: showing detailed information of NSR Clients
    Parent objects: 
        DetailClientTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR client
    Value: tcp_nsr_ccb_detailed_bag
    Applicable methods: get_data

    Description: Information about TCP NSR Session Sets
    Parent objects: 
        Node
    Child objects: 
        BriefSetTable - Information about TCP NSR Session Sets
        DetailSetTable - Table about TCP NSR Session Sets details
    Applicable methods: find_data

    Description: Information about TCP NSR Session Sets
    Parent objects: 
        SessionSet
    Child objects: 
        BriefSet - Brief information about NSR Session Sets
    Applicable methods: get_keys, get_entries

    Description: Brief information about NSR Session Sets
    Parent objects: 
        BriefSetTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR Session Set
    Value: tcp_nsr_sscb_brief_bag
    Applicable methods: get_data

    Description: Table about TCP NSR Session Sets details
    Parent objects: 
        SessionSet
    Child objects: 
        DetailSet - showing detailed information of NSR Session Sets
    Applicable methods: get_keys, get_entries

    Description: showing detailed information of NSR Session Sets
    Parent objects: 
        DetailSetTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR Sesison Set
    Value: tcp_nsr_sscb_detailed_bag
    Applicable methods: get_data

    Description: Information about TCP NSR Sessions
    Parent objects: 
        Node
    Child objects: 
        BriefSessionTable - Information about TCP NSR Sessions
        DetailSessionTable - Table about TCP NSR Sessions details
    Applicable methods: find_data

    Description: Information about TCP NSR Sessions
    Parent objects: 
        Session
    Child objects: 
        BriefSession - Brief information about NSR Sessions
    Applicable methods: get_keys, get_entries

    Description: Brief information about NSR Sessions
    Parent objects: 
        BriefSessionTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR Sesison
    Value: tcp_nsr_pcb_brief_bag
    Applicable methods: get_data

    Description: Table about TCP NSR Sessions details
    Parent objects: 
        Session
    Child objects: 
        DetailSession - showing detailed information of NSR Sessions
    Applicable methods: get_keys, get_entries

    Description: showing detailed information of NSR Sessions
    Parent objects: 
        DetailSessionTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR Sesison
    Value: tcp_nsr_pcb_detailed_bag
    Applicable methods: get_data

    Description: Statis Information about TCP NSR connections
    Parent objects: 
        Node
    Child objects: 
        StatisticClientTable - Table listing NSR connections for which statistic information is provided
        StatisticSessionTable - Table listing NSR connections for which statistic information is provided
        StatisticSetTable - Table listing NSR connections for which statistic information is provided
        Summary - Summary statistics across all NSR connections
    Applicable methods: find_data

    Description: Summary statistics across all NSR connections
    Parent objects: 
        Statistics
    Value: tcp_nsr_summary_stats_bag
    Applicable methods: get_data

    Description: Table listing NSR connections for which statistic information is provided
    Parent objects: 
        Statistics
    Child objects: 
        StatisticSession - showing statistic information of TCP connections
    Applicable methods: get_keys, get_entries

    Description: showing statistic information of TCP connections
    Parent objects: 
        StatisticSessionTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of TCP connection
    Value: tcp_nsr_pcb_stats_bag
    Applicable methods: get_data

    Description: Table listing NSR connections for which statistic information is provided
    Parent objects: 
        Statistics
    Child objects: 
        StatisticClient - showing statistic information of NSR Clients
    Applicable methods: get_keys, get_entries

    Description: showing statistic information of NSR Clients
    Parent objects: 
        StatisticClientTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR Client
    Value: tcp_nsr_ccb_stats_bag
    Applicable methods: get_data

    Description: Table listing NSR connections for which statistic information is provided
    Parent objects: 
        Statistics
    Child objects: 
        StatisticSet - showing statistic information of NSR Session Set
    Applicable methods: get_keys, get_entries

    Description: showing statistic information of NSR Session Set
    Parent objects: 
        StatisticSetTable
    Keys: 
        ID (mandatory)
            Type: HexInteger
            Description: ID of NSR Session Set
    Value: tcp_nsr_sscb_stats_bag
    Applicable methods: get_data

Perl Data Object Documentation for aaa_radius_oper, version 3. 0.

Objects

    Description: RADIUS operational data
    Parent objects: 
        AAA
    Child objects: 
        Global - RADIUS Client Information
        ServerTable - List of RADIUS servers configured
    Applicable methods: find_data

    Description: List of RADIUS servers configured
    Parent objects: 
        RADIUS
    Child objects: 
        Server - RADIUS Server
    Applicable methods: get_keys, get_entries

    Description: RADIUS Server
    Parent objects: 
        ServerTable
    Keys: 
        IPAddress
            Type: IPV4Address
            Description: IP address of RADIUS server
        AuthPortNumber
            Type: AAAPortRange
            Description: Authentication Port number (standard port 1645)
        AcctPortNumber
            Type: AAAPortRange
            Description: Accounting Port number (standard port 1646)
    Value: radius_serverbag
    Applicable methods: get_data

    Description: RADIUS Client Information
    Parent objects: 
        RADIUS
    Value: radius_clientbag
    Applicable methods: get_data

Perl Data Object Documentation for ipsla_app_common_oper, version 4. 2.

Objects

    Description: IPSLA operational data
    Task IDs required: monitor
    Parent objects: 
        Operational
    Child objects: 
        ApplicationInfo - IPSLA application information
        MPLSData - MPLS operational data
        OperationData - Operations data
        Responder - Data from responder probe handling
    Applicable methods: find_data

    Description: IPSLA application information
    Parent objects: 
        IPSLA
    Value: ipsla_application_bag
    Applicable methods: get_data

Perl Data Object Documentation for bgp_action, version 7. 0.

Objects

    Description: Container class for BGP action data
    Task IDs required: bgp
    Parent objects: 
        Action
    Child objects: 
        ClearMode - Switch BGP into the currently configured mode (standalone or distributed)
        DefaultVRF - Default VRF related BGP action
        VRFTable - VRF related BGP action
    Applicable methods: set_data

    Description: Default VRF related BGP action
    Parent objects: 
        BGP
    Child objects: 
        AFTable - Container class for the address families supported by BGP
        ClearDrops - Clear peer drops
        ClearPerformanceStats - Clear BGP performance stats information
    Applicable methods: set_data

    Description: Container class for the address families supported by BGP
    Parent objects: 
        DefaultVRF
        VRF
    Child objects: 
        AF - A particular address family
    Applicable methods: set_data

    Description: A particular address family
    Parent objects: 
        AFTable
    Keys: 
        OAF
            Type: BGPOfficialAddressFamilyType
            Description: Official address family
        SAF
            Type: BGPSubsequentAddressFamilyType
            Description: Subsequent address family
    Child objects: 
        ClearDampening - Clear dampening statistics
        ClearFlapStatistics - Clear flap statistics
        ClearNexthop - Clear nexthop
        ClearPeer - Clear neighbors
        ClearSelfOriginated - Clear redistributed, network and aggregate routes originated by the local system
    Applicable methods: set_data

    Description: Clear dampening statistics
    Parent objects: 
        AF
    Child objects: 
        All - Clear the dampening statistics for all neighbors
        NetworkTable - Clear dampening statistics for a network table
    Applicable methods: set_data

    Description: Clear the dampening statistics for all neighbors
    Parent objects: 
        ClearDampening
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear dampening statistics for a network table
    Parent objects: 
        ClearDampening
    Child objects: 
        Network - Clear dampening statistics for a network
    Applicable methods: set_data

    Description: Clear dampening statistics for a network
    Parent objects: 
        NetworkTable
    Keys: 
        Network (mandatory)
            Type: IPAddressPrefix
            Description: The network in prefix/length format
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear redistributed, network and aggregate routes originated by the local system
    Parent objects: 
        AF
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear flap statistics
    Parent objects: 
        AF
    Child objects: 
        AF - Clear flap stats for an address family
        NeighborFlapsTable - Clear the flap statistics for a neighbor table
        NetworkFlapTable - Clear network flap stats table
        RegexpTable - Clear AS paths flap stats regular expression table
        RoutePolicyTable - Clear route policy flap stats table
    Applicable methods: set_data

    Description: Clear flap stats for an address family
    Parent objects: 
        ClearFlapStatistics
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear network flap stats table
    Parent objects: 
        ClearFlapStatistics
    Child objects: 
        NetworkFlap - Clear flap stats for a network
    Applicable methods: set_data

    Description: Clear flap stats for a network
    Parent objects: 
        NetworkFlapTable
    Keys: 
        Network (mandatory)
            Type: IPAddressPrefix
            Description: The network in prefix/length format
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear route policy flap stats table
    Parent objects: 
        ClearFlapStatistics
    Child objects: 
        RoutePolicy - Table entry to clear flap stats info via route policy
    Applicable methods: set_data

    Description: Table entry to clear flap stats info via route policy
    Parent objects: 
        RoutePolicyTable
    Keys: 
        PolicyName (mandatory)
            Type: xsd:string
            Description: Route policy name
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear AS paths flap stats regular expression table
    Parent objects: 
        ClearFlapStatistics
    Child objects: 
        Regexp - Clear AS path flap stats via regular expression
    Applicable methods: set_data

    Description: Clear AS path flap stats via regular expression
    Parent objects: 
        RegexpTable
    Keys: 
        RegExp (mandatory)
            Type: xsd:string
            Description: An encoded regular expression to match the BGP AS paths
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear the flap statistics for a neighbor table
    Parent objects: 
        ClearFlapStatistics
    Child objects: 
        NeighborFlaps - Clear a neighbors flap statistics
    Applicable methods: set_data

    Description: Clear a neighbors flap statistics
    Parent objects: 
        NeighborFlapsTable
    Keys: 
        Neighbor (mandatory)
            Type: IPAddress
            Description: Neighbor address
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear neighbors
    Parent objects: 
        AF
    Child objects: 
        ASTable - Clear a group of neighbors with a given AS table
        All - Clear all neighbors.  CLI note: 'Graceful' is only available if 'PrefixFilter' is FALSE and 'Direction' is 'Hard' and afi/safi is 'all/all'.  'Graceful' and 'PrefixFilter' values of FALSE mean not to apply them.
        External - Clear all external neighbors
        NeighborTable - Clear a neighbor table
        OutOfMemoryShutdown - Clear all neighbors which were shut down due to low memory
    Applicable methods: set_data

    Description: Clear all neighbors.  CLI note: 'Graceful' is only available if 'PrefixFilter' is FALSE and 'Direction' is 'Hard' and afi/safi is 'all/all'.  'Graceful' and 'PrefixFilter' values of FALSE mean not to apply them.
    Parent objects: 
        ClearPeer
    Values: 
        Direction
            Type: BGPClearDirectionType
            Description: Clear direction
        PrefixFilter
            Type: xsd:boolean
            Description: TRUE to apply an outbound prefix filter
        Graceful
            Type: xsd:boolean
            Description: Clear gracefully
    Default value: none.
    Applicable methods: set_data

    Description: Clear a neighbor table
    Parent objects: 
        ClearPeer
    Child objects: 
        Neighbor - Clear a neighbor
    Applicable methods: set_data

    Description: Clear a neighbor
    Parent objects: 
        NeighborTable
    Keys: 
        Neighbor (mandatory)
            Type: IPAddress
            Description: Neighbor address
    Values: 
        Direction
            Type: BGPClearDirectionType
            Description: Clear direction
        PrefixFilter
            Type: xsd:boolean
            Description: TRUE to apply an outbound prefix filter
        Graceful
            Type: xsd:boolean
            Description: Clear gracefully
    Default value: none.
    Applicable methods: set_data

    Description: Clear a group of neighbors with a given AS table
    Parent objects: 
        ClearPeer
    Child objects: 
        AS - Clear a group of neighbors with a given AS
    Applicable methods: set_data

    Description: Clear a group of neighbors with a given AS
    Parent objects: 
        ASTable
    Keys: 
        AS_XX
            Type: BGP_ASRange
            Description: xx of AS number xx.yy
        AS_YY
            Type: BGP_ASRange
            Description: yy of AS number xx.yy
    Values: 
        Direction
            Type: BGPClearDirectionType
            Description: Clear direction
        PrefixFilter
            Type: xsd:boolean
            Description: TRUE to apply an outbound prefix filter
        Graceful
            Type: xsd:boolean
            Description: Clear gracefully
    Default value: none.
    Applicable methods: set_data

    Description: Clear all external neighbors
    Parent objects: 
        ClearPeer
    Values: 
        Direction
            Type: BGPClearDirectionType
            Description: Clear direction
        PrefixFilter
            Type: xsd:boolean
            Description: TRUE to apply an outbound prefix filter
        Graceful
            Type: xsd:boolean
            Description: Clear gracefully
    Default value: none.
    Applicable methods: set_data

    Description: Clear all neighbors which were shut down due to low memory
    Parent objects: 
        ClearPeer
    Values: 
        Direction
            Type: BGPClearDirectionType
            Description: Clear direction
        PrefixFilter
            Type: xsd:boolean
            Description: TRUE to apply an outbound prefix filter
        Graceful
            Type: xsd:boolean
            Description: Clear gracefully
    Default value: none.
    Applicable methods: set_data

    Description: Clear nexthop
    Parent objects: 
        AF
    Child objects: 
        PerformanceStatistics - Performance statistics information related to processing
        RegistrationNexthop - Registration with RIB and reregister
    Applicable methods: set_data

    Description: Performance statistics information related to processing
    Parent objects: 
        ClearNexthop
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Registration with RIB and reregister
    Parent objects: 
        ClearNexthop
    Child objects: 
        Nexthop - Nexthop to be re-reregistered
    Applicable methods: set_data

    Description: Nexthop to be re-reregistered
    Parent objects: 
        RegistrationNexthop
    Keys: 
        Nexthop (mandatory)
            Type: IPAddress
            Description: Nexthop address
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear BGP performance stats information
    Parent objects: 
        DefaultVRF
        VRF
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear peer drops
    Parent objects: 
        DefaultVRF
        VRF
    Child objects: 
        All - Clear peer drop info for all neighbors
        NeighborDropsTable - Clear neighbor peer drops table
    Applicable methods: set_data

    Description: Clear peer drop info for all neighbors
    Parent objects: 
        ClearDrops
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: Clear neighbor peer drops table
    Parent objects: 
        ClearDrops
    Child objects: 
        NeighborDrops - Clear the peer drop info for a neighbor
    Applicable methods: set_data

    Description: Clear the peer drop info for a neighbor
    Parent objects: 
        NeighborDropsTable
    Keys: 
        Neighbor (mandatory)
            Type: IPAddress
            Description: Neighbor address
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

    Description: VRF related BGP action
    Parent objects: 
        BGP
    Child objects: 
        VRF - Actions for a particular VRF
    Applicable methods: set_data

    Description: Actions for a particular VRF
    Parent objects: 
        VRFTable
    Keys: 
        VrfName (mandatory)
            Type: xsd:string
            Description: Name of the VRF
    Child objects: 
        AFTable - Container class for the address families supported by BGP
        ClearDrops - Clear peer drops
        ClearPerformanceStats - Clear BGP performance stats information
    Applicable methods: set_data

    Description: Switch BGP into the currently configured mode (standalone or distributed)
    Parent objects: 
        BGP
    Values: 
        True (mandatory)
            Type: xsd:boolean
            Description: Clear value
    Default value: none.
    Applicable methods: set_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'Hard' - Hard Reset
        'SoftInbound' - Soft inbound
        'SoftOutbound' - Soft outbound
        'Both' - Soft inbound and outbound

    Description: Statistics collection aggregated over an hour
    Parent objects: 
        ICMPPathEcho
    Child objects: 
        DistCount - Count of distribution intervals maintained
        DistInterval - Distribution interval length
        Hops - Maximum hops per path for which statistics are kept
        Hours - Number of hours for which hourly statistics are kept
        Paths - Maximum number of paths for which statistics are kept
    Applicable methods: find_data, set_data, delete_data

    Description: Count of distribution intervals maintained
    Parent objects: 
        Statistics
    Values: 
        DistIntervalCount (mandatory)
            Type: Range. Value lies between 1 and 20
            Description: Specify number of distribution intervals
    Default value: 
        DistIntervalCount => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Distribution interval length
    Parent objects: 
        Statistics
    Values: 
        DistInterval (mandatory)
            Type: Range. Value lies between 1 and 100
            Description: Specify distribution interval in milliseconds
    Default value: 
        DistInterval => 20
    Applicable methods: get_data, set_data, delete_data

    Description: Number of hours for which hourly statistics are kept
    Parent objects: 
        Statistics
    Values: 
        HoursCount (mandatory)
            Type: Range. Value lies between 0 and 25
            Description: Specify number of hours
    Default value: 
        HoursCount => 2
    Applicable methods: get_data, set_data, delete_data

    Description: Maximum hops per path for which statistics are kept
    Parent objects: 
        Statistics
    Values: 
        HopsCount (mandatory)
            Type: Range. Value lies between 1 and 30
            Description: Specify number of hops
    Default value: 
        HopsCount => 16
    Applicable methods: get_data, set_data, delete_data

    Description: Maximum number of paths for which statistics are kept
    Parent objects: 
        Statistics
    Values: 
        PathCount (mandatory)
            Type: Range. Value lies between 1 and 128
            Description: Specify number of paths
    Default value: 
        PathCount => 5
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for ipv4_pim_oper, version 6. 0.

Objects

    Description: PIM operational data
    Task IDs required: multicast
    Parent objects: 
        Operational
    Child objects: 
        BSR - PIM BSR Information
        BidirDFStateTable - Bidirectional PIM DF Election State Table
        BidirDFWinnerTable - Bidirectional PIM DF Election Winner Table
        GroupMapMatchRPFTable - Find the Matching Group-Mapping for the specified Group Address
        GroupMapMatchSrcTable - Find the Matching Group-Mapping with source information on specified Group Address
        GroupMapRPFTable - PIM Group Mapping Information
        GroupMapSrcTable - PIM Group Mapping with source information
        InterfaceTable - PIM Interfaces
        JPStatsTable - PIM Join Prune Statistics Table
        NSF - PIM NSF Information
        NeighborSummaryTable - PIM Neighbor Summary Table
        NeighborTable - PIM Neighbor Table
        RPFHashS - PIM RPF Hash Outcome for S
        RPFHashSG - PIM RPF Hash Outcome for S,G
        RPFNbrTable - PIM RPF Neighbor Table
        RPFTable - PIM RPF Information Table
        RPFTableSummary - PIM RPF Registration Summary
        RangeListTable - PIM Range List Information
        Summary - PIM Summary Information
        TopologyTable - PIM Topology Table
        TopologyTableCount - Route count information from PIM Topology Table
        TrafficCounters - PIM Message Traffic Counters
        TunnelPIMInfoTable - Tunnels Info that PIM has
    Applicable methods: find_data

    Description: Bidirectional PIM DF Election Winner Table
    Parent objects: 
        PIM
    Child objects: 
        BidirDFWinner - Bidirectional PIM DF Election Table Entry
    Applicable filters: 
        PIM_RPAddressFilter
        PIMInterfaceFilter
    Applicable methods: get_keys, get_entries

    Description: Bidirectional PIM DF Election Table Entry
    Parent objects: 
        BidirDFWinnerTable
    Keys: 
        RPAddress
            Type: IPAddress
            Description: RP Address
        Name
            Type: Interface
            Description: Interface Name
    Value: pim_bidir_df_bag
    Applicable methods: get_data

    Description: Bidirectional PIM DF Election State Table
    Parent objects: 
        PIM
    Child objects: 
        BidirDFState - Bidirectional PIM DF Election Table Entry
    Applicable filters: 
        PIM_RPAddressFilter
        PIMInterfaceFilter
    Applicable methods: get_keys, get_entries

    Description: Bidirectional PIM DF Election Table Entry
    Parent objects: 
        BidirDFStateTable
    Keys: 
        RPAddress
            Type: IPAddress
            Description: RP Address
        Name
            Type: Interface
            Description: Interface Name
    Value: pim_bidir_df_state_bag
    Applicable methods: get_data

    Description: PIM NSF Information
    Parent objects: 
        PIM
    Value: pim_nsf_bag
    Applicable methods: get_data

    Description: PIM Topology Table
    Parent objects: 
        PIM
    Child objects: 
        Topology - PIM Topology Information
    Applicable filters: 
        PIMSourceGroupAddressFilter
        PIMGroupAddressFilter
        PIMSourceAddressFilter
    Applicable methods: get_keys, get_entries

    Description: PIM Topology Information
    Parent objects: 
        TopologyTable
    Keys: 
        SourceAddress
            Type: IPAddress
            Description: Source Address
        GroupAddress
            Type: IPAddress
            Description: Group Address
        RPT
            Type: xsd:unsignedInt
            Description: RPT bit
    Value: pim_tt_route_bag
    Applicable methods: get_data

    Description: Route count information from PIM Topology Table
    Parent objects: 
        PIM
    Value: pim_tt_summ_bag
    Applicable methods: get_data

    Description: PIM Range List Information
    Parent objects: 
        PIM
    Child objects: 
        RangeList - PIM Range List Information
    Applicable filters: 
        PIM_RPAddressFilter
        PIMClientFilter
    Applicable methods: get_keys, get_entries

    Description: PIM Range List Information
    Parent objects: 
        RangeListTable
    Keys: 
        RPAddress
            Type: IPAddress
            Description: RP Address
        Client
            Type: PIMClientType
            Description: Client
    Value: pim_rl_bag
    Applicable methods: get_data

    Description: PIM Group Mapping Information
    Parent objects: 
        PIM
    Child objects: 
        GroupMapRPF - PIM Group Mapping Entry
    Applicable methods: get_keys, get_entries

    Description: PIM Group Mapping Entry
    Parent objects: 
        GroupMapRPFTable
    Keys: 
        Prefix
            Type: IPAddress
            Description: Prefix
        PrefixLength
            Type: xsd:unsignedInt
            Description: Prefix Length
        Client
            Type: PIMClientType
            Description: Client
        Protocol
            Type: PIMProtocolType
            Description: Protocol
        RPAddress
            Type: IPAddress
            Description: RP Address
        RPPriority
            Type: xsd:unsignedInt
            Description: RP Priority
    Value: pim_grp_map_inforpf_bag
    Applicable methods: get_data

    Description: Find the Matching Group-Mapping for the specified Group Address
    Parent objects: 
        PIM
    Child objects: 
        GroupMapMatchRPF - PIM Group Matching Mapping Entry
    Applicable methods: get_keys, get_entries

    Description: PIM Group Matching Mapping Entry
    Parent objects: 
        GroupMapMatchRPFTable
    Keys: 
        GroupAddress (mandatory)
            Type: IPAddress
            Description: Group Address
    Value: pim_grp_map_inforpf_bag
    Applicable methods: get_data

    Description: PIM Group Mapping with source information
    Parent objects: 
        PIM
    Child objects: 
        GroupMapSrc - PIM Group Mapping Entry with source information
    Applicable methods: get_keys, get_entries

    Description: PIM Group Mapping Entry with source information
    Parent objects: 
        GroupMapSrcTable
    Keys: 
        Prefix
            Type: IPV4Mask
            Description: Prefix
        PrefixLength
            Type: xsd:unsignedInt
            Description: Prefix Length
        Client
            Type: PIMClientType
            Description: Client
        Protocol
            Type: PIMProtocolType
            Description: Protocol
        RPAddress
            Type: IPAddress
            Description: RP Address
    Value: pim_grp_map_infosrc_bag
    Applicable methods: get_data

    Description: Find the Matching Group-Mapping with source information on specified Group Address
    Parent objects: 
        PIM
    Child objects: 
        GroupMapMatchSrc - PIM Group Matching Mapping Entry with source information
    Applicable methods: get_keys, get_entries

    Description: PIM Group Matching Mapping Entry with source information
    Parent objects: 
        GroupMapMatchSrcTable
    Keys: 
        GroupAddress (mandatory)
            Type: IPAddress
            Description: Group Address
    Value: pim_grp_map_infosrc_bag
    Applicable methods: get_data

    Description: PIM Interfaces
    Parent objects: 
        PIM
    Child objects: 
        Interface - PIM Interface
    Applicable filters: 
        PIMInterfaceStateOnFilter
        PIMInterfaceStateOffFilter
    Applicable methods: get_keys, get_entries

    Description: PIM Interface
    Parent objects: 
        InterfaceTable
    Keys: 
        Name (mandatory)
            Type: Interface
            Description: Interface Name
    Value: pim_idb_bag
    Applicable methods: get_data

    Description: PIM Neighbor Table
    Parent objects: 
        PIM
    Child objects: 
        Neighbor - PIM Neighbor Information
    Applicable filters: 
        PIMInterfaceFilter
    Applicable methods: get_keys, get_entries

    Description: PIM Neighbor Information
    Parent objects: 
        NeighborTable
    Keys: 
        InterfaceName
            Type: Interface
            Description: Interface Name
        Neighboraddress
            Type: IPAddress
            Description: Neighbor Address
    Value: pim_nbr_bag
    Applicable methods: get_data

    Description: PIM Neighbor Summary Table
    Parent objects: 
        PIM
    Child objects: 
        NeighborSummary - PIM Neighbor Summary Information
    Applicable methods: get_keys, get_entries

    Description: PIM Neighbor Summary Information
    Parent objects: 
        NeighborSummaryTable
    Keys: 
        InterfaceName (mandatory)
            Type: Interface
            Description: Interface Name
    Value: pim_nbr_summ_bag
    Applicable methods: get_data

    Description: Tunnels Info that PIM has
    Parent objects: 
        PIM
    Child objects: 
        TunnelPIMInfo - PIM Tunnel Information
    Applicable methods: get_keys, get_entries

    Description: PIM Tunnel Information
    Parent objects: 
        TunnelPIMInfoTable
    Keys: 
        TunnelName (mandatory)
            Type: xsd:string
            Description: Tunnel Name
    Value: pim_tunnel_info_bag
    Applicable methods: get_data

    Description: PIM RPF Information Table
    Parent objects: 
        PIM
    Child objects: 
        RPF - PIM RPF Information
    Applicable methods: get_keys, get_entries

    Description: PIM RPF Information
    Parent objects: 
        RPFTable
    Keys: 
        RegisteredAddress (mandatory)
            Type: IPAddress
            Description: Address for which RPF lookup
    Value: pim_rpf_info_bag
    Applicable methods: get_data

    Description: PIM RPF Registration Summary
    Parent objects: 
        PIM
    Value: pim_rpf_summary_bag
    Applicable methods: get_data

    Description: PIM RPF Hash Outcome for S
    Parent objects: 
        PIM
    Value: pim_rpf_hash_bag
    Applicable methods: get_data

    Description: PIM RPF Hash Outcome for S,G
    Parent objects: 
        PIM
    Value: pim_rpf_hash_bag
    Applicable methods: get_data

    Description: PIM RPF Neighbor Table
    Parent objects: 
        PIM
    Child objects: 
        RPFNeighbor - PIM RPF RIB Neighbor
    Applicable methods: get_keys, get_entries

    Description: PIM RPF RIB Neighbor
    Parent objects: 
        RPFNbrTable
    Keys: 
        InterfaceName
            Type: Interface
            Description: Interface Name
        RIBNbrAddress
            Type: IPAddress
            Description: RPF neighbor address to lookup
    Value: pim_rpf_nbr_bag
    Applicable methods: get_data

    Description: PIM Join Prune Statistics Table
    Parent objects: 
        PIM
    Child objects: 
        JPStats - PIM Join Prune Statistics
    Applicable methods: get_keys, get_entries

    Description: PIM Join Prune Statistics
    Parent objects: 
        JPStatsTable
    Keys: 
        Name (mandatory)
            Type: Interface
            Description: Interface Name
    Value: pim_jpstats_bag
    Applicable methods: get_data

    Description: PIM Message Traffic Counters
    Parent objects: 
        PIM
    Value: pim_traffic_bag
    Applicable methods: get_data

    Description: PIM Summary Information
    Parent objects: 
        PIM
    Value: pim_summary_bag
    Applicable methods: get_data

    Description: PIM BSR Information
    Parent objects: 
        PIM
    Child objects: 
        BSRElection - PIM BSR election state
        BSRRPCache - PIM BSR RP Cache
        CandidateRP - PIM Candidate-RP
    Applicable methods: find_data

    Description: PIM BSR election state
    Parent objects: 
        BSR
    Child objects: 
        BSRInfo - PIM BSR Information
    Applicable methods: get_keys, get_entries

    Description: PIM BSR Information
    Parent objects: 
        BSRElection
    Keys: 
        PIMScope (mandatory)
            Type: xsd:unsignedInt
            Description: Scope
    Value: pim_bsr_election_bag
    Applicable methods: get_data

    Description: PIM BSR RP Cache
    Parent objects: 
        BSR
    Child objects: 
        RPCacheTable - PIM BSR RP Cache
    Applicable methods: get_keys, get_entries

    Description: PIM BSR RP Cache
    Parent objects: 
        BSRRPCache
    Keys: 
        GrpPrefix (mandatory)
            Type: IPAddress
            Description: Group Prefix
    Value: pim_bsr_rp_cache_bag
    Applicable methods: get_data

    Description: PIM Candidate-RP
    Parent objects: 
        BSR
    Child objects: 
        CRPInfo - PIM BSR CRP Information
    Applicable methods: get_keys, get_entries

    Description: PIM BSR CRP Information
    Parent objects: 
        CandidateRP
    Keys: 
        CRPAddress (mandatory)
            Type: IPAddress
            Description: Candidate-RP Address
    Value: pim_bsr_candidate_rp_bag
    Applicable methods: get_data

Datatypes

    Definition: Enumeration. Valid values are: 
        'NonRoutable' - Non-Routable
        'SparseMode' - Sparse Mode
        'DenseMode' - Dense Mode
        'Bidir' - Bidirectional Mode
        'SSM' - Source Specific Multicast Mode

    Definition: Enumeration. Valid values are: 
        'NoClient' - No Client
        'Permanent' - Permanent
        'AutoRP' - AutoRP
        'BSR' - BSR
        'Configured' - Configured
        'Static' - Static

    Description: Filter based on RP Address
    Parameters: 
        RPAddress (mandatory)
            Type: IPAddress
            Description: RP Address

    Description: Filter based on the Interface
    Parameters: 
        Name (mandatory)
            Type: Interface
            Description: Interface name

    Description: Filter based on Source and Group Addresses
    Parameters: 
        SourceAddress
            Type: IPAddress
            Description: Source Address
        GroupAddress
            Type: IPAddress
            Description: Group Address

    Description: Filter based on Group Address
    Parameters: 
        GroupAddress (mandatory)
            Type: IPAddress
            Description: Group Address

    Description: Filter based on Source Address
    Parameters: 
        SourceAddress (mandatory)
            Type: IPAddress
            Description: Source Address

    Description: Filter based on the source of Info (the client number)
    Parameters: 
        Client (mandatory)
            Type: PIMClientType
            Description: Client

    Description: Filter in only interfaces that are PIM enabled
    Parameters:

    Description: Filter in only interfaces that are PIM disabled
    Parameters:

    Description: Configure IPv4 Pool
    Task IDs required: ip-services
    Parent objects: 
        Configuration
    Child objects: 
        Ipv4PoolUtilizationMarkTable - Configure utilization thresholds for all pools
        VrfTable - Specify VRF of pool
    Applicable methods: find_data, set_data, delete_data

    Description: Configure utilization thresholds for all pools
    Parent objects: 
        Ipv4Pool
    Child objects: 
        UtilizationMarkHigh - High utilization mark
        UtilizationMarkLow - Low utilization mark
    Applicable methods: find_data, set_data, delete_data

    Description: Low utilization mark
    Parent objects: 
        Ipv4PoolUtilizationMarkTable
    Values: 
        LowUtil (mandatory)
            Type: Range. Value lies between 1 and 100
            Description: Specify numerical value as percentage
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: High utilization mark
    Parent objects: 
        Ipv4PoolUtilizationMarkTable
    Values: 
        HighUtil (mandatory)
            Type: Range. Value lies between 1 and 100
            Description: Specify numerical value as percentage
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify VRF of pool
    Parent objects: 
        Ipv4Pool
    Child objects: 
        Vrf - none
    Applicable methods: get_keys, set_data, delete_data

    Description: none
    Parent objects: 
        VrfTable
    Keys: 
        VrfName
            Type: xsd:string
            Description: Specify VRF name
        PoolName
            Type: xsd:string
            Description: Specify pool name
    Child objects: 
        AddressRangeTable - Specify address range for allocation
        Enter - Create or enter pool configuration mode
        ExcludeTable - Exclude addresses from pool
        NetworkTable - Specify network for allocation
        VrfUtilizationMarkTable - Specify utilization mark
    Applicable methods: find_data, set_data, delete_data

    Description: Create or enter pool configuration mode
    Parent objects: 
        Vrf
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: none
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify address range for allocation
    Parent objects: 
        Vrf
    Child objects: 
        AddressRange - Specify address range
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Specify address range
    Parent objects: 
        AddressRangeTable
    Keys: 
        RangeStart
            Type: IPV4Address
            Description: Specify first address in range
        RangeEnd
            Type: IPV4Address
            Description: Specify last address in range
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: none
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Exclude addresses from pool
    Parent objects: 
        Vrf
    Child objects: 
        Exclude - Specify excluded address range
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: Specify excluded address range
    Parent objects: 
        ExcludeTable
    Keys: 
        RangeStart
            Type: IPV4Address
            Description: First address in range
        RangeEnd
            Type: IPV4Address
            Description: Last address in range
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: none
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify network for allocation
    Parent objects: 
        Vrf
    Child objects: 
        Network - IP prefix <network/length>
    Applicable methods: get_keys, get_entries, set_data, delete_data

    Description: IP prefix <network/length>
    Parent objects: 
        NetworkTable
    Keys: 
        Ipv4Address
            Type: IPV4Address
            Description: IPv4 prefix
        Ipv4Mask
            Type: IPV4Mask
            Description: Ipv4 mask
    Values: 
        Enable (mandatory)
            Type: xsd:boolean
            Description: none
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify utilization mark
    Parent objects: 
        Vrf
    Child objects: 
        VrfUtilizationMarkHigh - High utilization mark
        VrfUtilizationMarkLow - Low utilization mark
    Applicable methods: find_data, set_data, delete_data

    Description: Low utilization mark
    Parent objects: 
        VrfUtilizationMarkTable
    Values: 
        LowUtil (mandatory)
            Type: Range. Value lies between 1 and 100
            Description: Specify numerical value as percentage
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: High utilization mark
    Parent objects: 
        VrfUtilizationMarkTable
    Values: 
        HighUtil (mandatory)
            Type: Range. Value lies between 1 and 100
            Description: Specify numerical value as percentage
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

Perl Data Object Documentation for crypto_cepki_oper, version 2. 0.

Objects

    Description: Public Key Infrastructure Related Information
    Task IDs required: crypto
    Parent objects: 
        Operational
    Child objects: 
        TrustpointTable - CA Trustpoint Table Information
    Applicable methods: find_data

    Description: CA Trustpoint Table Information
    Parent objects: 
        CryptoCertificateAuthority
    Child objects: 
        Trustpoint - Certificate Information for a particular Trustpoint
    Applicable methods: get_keys

    Description: Certificate Information for a particular Trustpoint
    Parent objects: 
        TrustpointTable
    Keys: 
        Name (mandatory)
            Type: xsd:string
            Description: The Trustpoint to query
    Child objects: 
        CertificateAuthorityCertificate - Certificate Authority Certificate Attributes
        RouterCertificate - Router Certificate Attributes
        RouterEncryptionCertificate - Router Encryption Certificate Attributes
        RouterSignatureCertificate - Router Signature Certificate Attributes
    Applicable methods: find_data

    Description: Certificate Authority Certificate Attributes
    Parent objects: 
        Trustpoint
    Child objects: 
        CRLDistributionPointTable - Router Certificates CRLDistributionPoint Table
        CertificateExpiresOn - Valid before date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        CertificateValidFrom - Valid from date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        Issuer - Issuer Name of the Certificate
        Subject - Subject Name of the Certificate
    Applicable methods: find_data

    Description: Issuer Name of the Certificate
    Parent objects: 
        CertificateAuthorityCertificate
        RouterCertificate
        RouterSignatureCertificate
        RouterEncryptionCertificate
    Values: 
        Name (mandatory)
            Type: xsd:string
            Description: Issuer Name of the Certificate
    Default value: none.
    Applicable methods: get_data

    Description: Subject Name of the Certificate
    Parent objects: 
        CertificateAuthorityCertificate
        RouterCertificate
        RouterSignatureCertificate
        RouterEncryptionCertificate
    Values: 
        Name (mandatory)
            Type: xsd:string
            Description: Subject Name of the Certificate
    Default value: none.
    Applicable methods: get_data

    Description: Valid from date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
    Parent objects: 
        CertificateAuthorityCertificate
        RouterCertificate
        RouterSignatureCertificate
        RouterEncryptionCertificate
    Values: 
        Value (mandatory)
            Type: xsd:unsignedInt
            Description: Valid from date of the Certificate
    Default value: none.
    Applicable methods: get_data

    Description: Valid before date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
    Parent objects: 
        CertificateAuthorityCertificate
        RouterCertificate
        RouterSignatureCertificate
        RouterEncryptionCertificate
    Values: 
        Value (mandatory)
            Type: xsd:unsignedInt
            Description: Valid before date of the Certificate
    Default value: none.
    Applicable methods: get_data

    Description: Router Certificates CRLDistributionPoint Table
    Parent objects: 
        CertificateAuthorityCertificate
        RouterCertificate
        RouterSignatureCertificate
        RouterEncryptionCertificate
    Child objects: 
        CRLDistributionPoint - Certificate CRLDistributionPoint Instance
    Applicable methods: get_keys, get_entries

    Description: Certificate CRLDistributionPoint Instance
    Parent objects: 
        CRLDistributionPointTable
    Keys: 
        Index (mandatory)
            Type: xsd:unsignedInt
            Description: CDP Entry Index
    Values: 
        CDPContent (mandatory)
            Type: xsd:string
            Description: CRLDistributionPoint Content
    Default value: none.
    Applicable methods: get_data

    Description: Router Certificate Attributes
    Parent objects: 
        Trustpoint
    Child objects: 
        CRLDistributionPointTable - Router Certificates CRLDistributionPoint Table
        CertificateExpiresOn - Valid before date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        CertificateValidFrom - Valid from date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        Issuer - Issuer Name of the Certificate
        Subject - Subject Name of the Certificate
    Applicable methods: find_data

    Description: Router Signature Certificate Attributes
    Parent objects: 
        Trustpoint
    Child objects: 
        CRLDistributionPointTable - Router Certificates CRLDistributionPoint Table
        CertificateExpiresOn - Valid before date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        CertificateValidFrom - Valid from date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        Issuer - Issuer Name of the Certificate
        Subject - Subject Name of the Certificate
    Applicable methods: find_data

    Description: Router Encryption Certificate Attributes
    Parent objects: 
        Trustpoint
    Child objects: 
        CRLDistributionPointTable - Router Certificates CRLDistributionPoint Table
        CertificateExpiresOn - Valid before date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        CertificateValidFrom - Valid from date of the Certificate, in seconds since 00:00:00 UTC, January 1, 1970
        Issuer - Issuer Name of the Certificate
        Subject - Subject Name of the Certificate
    Applicable methods: find_data

Perl Data Object Documentation for service-sbc-infra_oper, version 1. 0.

Objects

    Description: SBC operational Data
    Parent objects: 
        Operational
    Child objects: 
        SbcProcess - Operational data for a particular SBC instance
    Applicable methods: get_keys

    Description: Operational data for a particular SBC instance
    Parent objects: 
        Sbc
    Keys: 
        InstanceName (mandatory)
            Type: xsd:string
            Description: SBC Instance
    Child objects: 
        SbcNotifications - Notification and Alarm data
    Applicable methods: find_data

    Description: Notification and Alarm data
    Parent objects: 
        SbcProcess
    Child objects: 
        iccInstanceAlarm - The overall alarm state of the SBC has changed
        iccOperStatusNotification - The operational status of the SBC has changed
        iccSigStackAlarm - Notifies that activation of a signaling stack has failed
        rpsRoutingActionAlarm - A routing action refers to a signaling stack that is not active
    Applicable methods: find_data

    Description: The overall alarm state of the SBC has changed
    Parent objects: 
        SbcNotifications
    Value: mw_icc_ca_instance
    Applicable methods: get_data

    Description: The operational status of the SBC has changed
    Parent objects: 
        SbcNotifications
    Value: mw_icc_ca_instance
    Applicable methods: get_data

    Description: Notifies that activation of a signaling stack has failed
    Parent objects: 
        SbcNotifications
    Value: mw_icc_sig_stack
    Applicable methods: get_data

    Description: A routing action refers to a signaling stack that is not active
    Parent objects: 
        SbcNotifications
    Value: mw_rps_rtg_action
    Applicable methods: get_data

Perl Data Object Documentation for ipsla_op_hist_oper, version 4. 2.

Objects

    Description: Historical data for an operation
    Parent objects: 
        Operation
    Child objects: 
        Path - Historical data with multiple hops along the path
        Target - Historical data for the destination node
    Applicable methods: find_data

    Description: Historical data for the destination node
    Parent objects: 
        History
    Child objects: 
        LifeTable - Tables of lives for an operation
    Applicable methods: find_data

    Description: Tables of lives for an operation
    Parent objects: 
        Target
    Child objects: 
        Life - Operational data for a particular life of the operation
    Applicable methods: get_keys

    Description: Operational data for a particular life of the operation
    Parent objects: 
        LifeTable
    Keys: 
        LifeIndex (mandatory)
            Type: IPSLALifeIndex
            Description: Life Index
    Child objects: 
        BucketTable - Table of history buckets (samples) for a particular operation
    Applicable methods: find_data

    Description: Table of history buckets (samples) for a particular operation
    Parent objects: 
        Life
    Child objects: 
        Bucket - History bucket for an operation
    Applicable methods: get_keys, get_entries

    Description: History bucket for an operation
    Parent objects: 
        BucketTable
    Keys: 
        BucketIndex (mandatory)
            Type: IPSLABucketIndex
            Description: Bucket Index
    Value: ipsla_history_bag
    Applicable methods: get_data

Datatypes

    Definition: xsd:unsignedInt

    Definition: xsd:unsignedInt

Perl Data Object Documentation for ipv4_dhcpd_oper, version 2. 2.

Objects

    Description: IPv4 DHCPD operational data
    Task IDs required: ip-services
    Parent objects: 
        Operational
    Child objects: 
        NodeTable - IPv4 DHCPD operational data for a particular location
    Applicable methods: find_data

    Description: IPv4 DHCPD operational data for a particular location
    Parent objects: 
        IPV4DHCPD
    Child objects: 
        Node - Location. For eg., 0/1/CPU0
    Applicable methods: get_keys

    Description: Location. For eg., 0/1/CPU0
    Parent objects: 
        NodeTable
    Keys: 
        nodeid (mandatory)
            Type: NodeID
            Description: The node id to filter on. For eg., 0/1/CPU0
    Child objects: 
        Proxy - DHCP proxy operational data
        Relay - IPv4 DHCPD Relay operational data
        Snoop - The DHCPD Snoop operational data
    Applicable methods: find_data

Perl Data Object Documentation for alpha_display_adminoper, version 1. 1.

Objects

    Description: Alpha Display Operational data space
    Task IDs required: root-system
    Parent objects: 
        AdminOperational
    Child objects: 
        NodeTable - Table of nodes
    Applicable methods: find_data

Perl Data Object Documentation for sonet_local_interface_cfg, version 3. 1.

Objects

    Description: SONET port controller configuration
    Task IDs required: sonet-sdh
    Parent objects: 
        InterfaceConfiguration
    Child objects: 
        AuPathTable - All SDH AU Path configurations for a SONET port
        ClockSource - Configure SONET port Transmit clock source
        Created - none
        Framing - Configure SONET port framing
        LineDelayClear - none
        LineDelayTrigger - none
        LineHoldOffDelay - none
        Loopback - Configure SONET port loopback mode
        PathTable - All SONET Path configurations for a SONET port
        ReportB1_BER - Configure B1 BER Threshold Crossing Alert (TCA) reporting
        ReportB2_BER - Configure B2 BER Threshold Crossing Alert (TCA) reporting
        ReportLAIS - Configure Line Alarm Indication Signal reporting
        ReportLRDI - Configure Line Remote Defect Indication reporting
        ReportSD_BER - Configure B2 BER in excess of SD threshold reporting
        ReportSF_BER - Configure B2 BER in excess of SF threshold reporting
        ReportSLOF - Configure Section Loss of Frame reporting
        ReportSLOS - Configure Section Loss of Signal reporting
        SendAISOnL2PortOnFault - Configure sending LAIS for L2Port when Pseudo-Wire fails
        SendAISOnShutdown - Configure sending LAIS when shutdown
        StsPathTable - All SONET Path configurations for a SONET port
        ThresholdB1_BER - Configure B1 BER Threshold Crossing Alert (TCA) threshold
        ThresholdB2_BER - Configure B2 BER Threshold Crossing Alert (TCA) threshold
        ThresholdSD_BER - Configure Signal Degrade BER threshold
        ThresholdSF_BER - Configure Signal Fail BER threshold
        TransmitJ0 - Specify STS identifier (J0/C1) byte
        TransmitS1S0 - Specify bits s1 and s0 of H1 byte
    Applicable methods: find_data, set_data, delete_data

    Description: All SONET Path configurations for a SONET port
    Parent objects: 
        SONET
    Child objects: 
        Path - SONET Path configuration
    Applicable methods: get_keys, set_data, delete_data

    Description: SONET Path configuration
    Parent objects: 
        PathTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: The SONET Path number - always 0 for non-channelized SONET ports
    Child objects: 
        Created - none
        DelayClear - none
        DelayTrigger - none
        HoldOffDelay - none
        ReportB3_BER - Configure B3 BER Threshold Crossing Alert (TCA) reporting
        ReportPAIS - Configure Path Alarm Indication Signal reporting
        ReportPLOP - Configure Path Loss of Pointer reporting
        ReportPRDI - Configure Path Remote Defect Indication reporting
        ReportPUNEQ - Configure Path Unequipped Defect Indication reporting
        Scrambling - Configure SPE scrambling
        SendAISOnShutdown - Configure sending PAIS when shutdown
        SendUNEQOnShutdown - Configure sending 'Unequipped' (UNEQ) when shutdown
        ThresholdB3_BER - Configure B3 BER Threshold Crossing Alert (TCA) reporting
        TransmitC2 - Configure STS SPE content (C2) byte
        TransmitJ1 - Configure SONET path trace (J1) buffer
    Applicable methods: find_data, set_data, delete_data

    Description: none
    Parent objects: 
        Path
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Only ever set to TRUE
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        Path
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Defects hold OFF delay (in msec)
    Default value: 
        Delay => 0
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        Path
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 0
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        Path
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 1000 and 180000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 10000
    Applicable methods: get_data, set_data, delete_data

    Description: Configure sending PAIS when shutdown
    Parent objects: 
        Path
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Send PAIS when shutdown
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure sending 'Unequipped' (UNEQ) when shutdown
    Parent objects: 
        Path
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Send UNEQ when shutdown
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SPE scrambling
    Parent objects: 
        Path
    Values: 
        Scrambling (mandatory)
            Type: SONETScramblingType
            Description: SONET SPE scrambling
    Default value: 
        Scrambling => Enabled
    Applicable methods: get_data, set_data, delete_data

    Description: Configure STS SPE content (C2) byte
    Parent objects: 
        Path
    Values: 
        C2 (mandatory)
            Type: Range. Value lies between 0 and 255
            Description: Transmit C2 byte value
    Default value: 
        C2 => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SONET path trace (J1) buffer
    Parent objects: 
        Path
    Values: 
        J1 (mandatory)
            Type: xsd:string
            Description: ASCII text (max 62 characters)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Loss of Pointer reporting
    Parent objects: 
        Path
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable PLOP reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Alarm Indication Signal reporting
    Parent objects: 
        Path
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PAIS reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Remote Defect Indication reporting
    Parent objects: 
        Path
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PRDI reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Unequipped Defect Indication reporting
    Parent objects: 
        Path
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PUNEQ reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B3 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        Path
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable B3 BER TCA reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B3 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        Path
    Values: 
        Threshold (mandatory)
            Type: Range. Value lies between 3 and 9
            Description: Bit error rate (10 to the minus n)
    Default value: 
        Threshold => 6
    Applicable methods: get_data, set_data, delete_data

    Description: All SONET Path configurations for a SONET port
    Parent objects: 
        SONET
    Child objects: 
        StsPath - SONET STS Path configuration
    Applicable methods: get_keys, set_data, delete_data

    Description: SONET STS Path configuration
    Parent objects: 
        StsPathTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: Valid range for path is 1-48
    Child objects: 
        DelayClear - none
        DelayTrigger - none
        ReportB3_BER - Configure B3 BER Threshold Crossing Alert (TCA) reporting
        ReportPAIS - Configure Path Alarm Indication Signal reporting
        ReportPLOP - Configure Path Loss of Pointer reporting
        ReportPRDI - Configure Path Remote Defect Indication reporting
        ReportPUNEQ - Configure Path Unequipped Defect Indication reporting
        Service - Configure service on sts Path
        ThresholdB3_BER - Configure B3 BER Threshold Crossing Alert (TCA) reporting
        TransmitC2 - Configure STS SPE content (C2) byte
        TransmitJ1 - Configure SONET path trace (J1) buffer
        Width - Configure width on sts Path
    Applicable methods: find_data, set_data, delete_data

    Description: Configure STS SPE content (C2) byte
    Parent objects: 
        StsPath
    Values: 
        C2 (mandatory)
            Type: Range. Value lies between 0 and 255
            Description: Transmit C2 byte value
    Default value: 
        C2 => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SONET path trace (J1) buffer
    Parent objects: 
        StsPath
    Values: 
        J1 (mandatory)
            Type: xsd:string
            Description: ASCII text (max 62 characters)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Loss of Pointer reporting
    Parent objects: 
        StsPath
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable PLOP reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Alarm Indication Signal reporting
    Parent objects: 
        StsPath
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PAIS reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Remote Defect Indication reporting
    Parent objects: 
        StsPath
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PRDI reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Unequipped Defect Indication reporting
    Parent objects: 
        StsPath
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PUNEQ reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B3 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        StsPath
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable B3 BER TCA reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B3 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        StsPath
    Values: 
        Threshold (mandatory)
            Type: Range. Value lies between 3 and 9
            Description: Bit error rate (10 to the minus n)
    Default value: 
        Threshold => 6
    Applicable methods: get_data, set_data, delete_data

    Description: Configure width on sts Path
    Parent objects: 
        StsPath
    Values: 
        Width (mandatory)
            Type: Range. Value lies between 1 and 768
            Description: Valid width(1,3,12,48..), natural sts boundaries(1,4,7,10,13..)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure service on sts Path
    Parent objects: 
        StsPath
    Values: 
        Service (mandatory)
            Type: STSServiceType
            Description: STS path service type
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        StsPath
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 0
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        StsPath
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 1000 and 180000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 10000
    Applicable methods: get_data, set_data, delete_data

    Description: All SDH AU Path configurations for a SONET port
    Parent objects: 
        SONET
    Child objects: 
        AuPath - SDH AU Path configuration
    Applicable methods: get_keys, set_data, delete_data

    Description: SDH AU Path configuration
    Parent objects: 
        AuPathTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: Valid range for path is 1-48
    Child objects: 
        DelayClear - none
        DelayTrigger - none
        ReportB3_BER - Configure B3 BER Threshold Crossing Alert (TCA) reporting
        ReportPAIS - Configure Path Alarm Indication Signal reporting
        ReportPLOP - Configure Path Loss of Pointer reporting
        ReportPRDI - Configure Path Remote Defect Indication reporting
        ReportPUNEQ - Configure Path Unequipped Defect Indication reporting
        Service - Configure service on au Path
        ThresholdB3_BER - Configure B3 BER Threshold Crossing Alert (TCA) reporting
        TransmitC2 - Configure STS SPE content (C2) byte
        TransmitJ1 - Configure SONET path trace (J1) buffer
        Tug3PathTable - All tug3 Path configurations for a SONET port
        Width - Configure width on sts Path
    Applicable methods: find_data, set_data, delete_data

    Description: All tug3 Path configurations for a SONET port
    Parent objects: 
        AuPath
    Child objects: 
        Tug3Path - SDH tug3 Path configuration
    Applicable methods: get_keys, set_data, delete_data

    Description: SDH tug3 Path configuration
    Parent objects: 
        Tug3PathTable
    Keys: 
        Number (mandatory)
            Type: xsd:unsignedInt
            Description: Valid range for path is 1-3
    Child objects: 
        Service - Configure service on tug3 Path
    Applicable methods: find_data, set_data, delete_data

    Description: Configure service on tug3 Path
    Parent objects: 
        Tug3Path
    Values: 
        Mode (mandatory)
            Type: TUG3ServiceType
            Description: TUG3 path service type
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure STS SPE content (C2) byte
    Parent objects: 
        AuPath
    Values: 
        C2 (mandatory)
            Type: Range. Value lies between 0 and 255
            Description: Transmit C2 byte value
    Default value: 
        C2 => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SONET path trace (J1) buffer
    Parent objects: 
        AuPath
    Values: 
        J1 (mandatory)
            Type: xsd:string
            Description: ASCII text (max 62 characters)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Loss of Pointer reporting
    Parent objects: 
        AuPath
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable PLOP reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Alarm Indication Signal reporting
    Parent objects: 
        AuPath
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PAIS reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Remote Defect Indication reporting
    Parent objects: 
        AuPath
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PRDI reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Path Unequipped Defect Indication reporting
    Parent objects: 
        AuPath
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable PUNEQ reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B3 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        AuPath
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable B3 BER TCA reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B3 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        AuPath
    Values: 
        Threshold (mandatory)
            Type: Range. Value lies between 3 and 9
            Description: Bit error rate (10 to the minus n)
    Default value: 
        Threshold => 6
    Applicable methods: get_data, set_data, delete_data

    Description: Configure width on sts Path
    Parent objects: 
        AuPath
    Values: 
        Width (mandatory)
            Type: Range. Value lies between 1 and 768
            Description: Valid width(1,3,12,48..), natural au boundaries(1,4,7,10,13..)
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure service on au Path
    Parent objects: 
        AuPath
    Values: 
        Service (mandatory)
            Type: AUServiceType
            Description: AU path service type
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        AuPath
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 0
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        AuPath
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 1000 and 180000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 10000
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        SONET
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Only ever set to TRUE
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        SONET
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Line defects hold OFF delay (in msec)
    Default value: 
        Delay => 0
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        SONET
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 0 and 60000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 0
    Applicable methods: get_data, set_data, delete_data

    Description: none
    Parent objects: 
        SONET
    Values: 
        Delay (mandatory)
            Type: Range. Value lies between 1000 and 180000
            Description: Value of Time in milliseconds
    Default value: 
        Delay => 10000
    Applicable methods: get_data, set_data, delete_data

    Description: Configure sending LAIS when shutdown
    Parent objects: 
        SONET
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Send LAIS when shutdown
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure sending LAIS for L2Port when Pseudo-Wire fails
    Parent objects: 
        SONET
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Send LAIS for L2Port when Pseudo-Wire fails
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SONET port Transmit clock source
    Parent objects: 
        SONET
    Values: 
        ClockSource (mandatory)
            Type: SONETClockSourceType
            Description: SONET Transmit Clock Source
    Default value: 
        ClockSource => Line
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SONET port framing
    Parent objects: 
        SONET
    Values: 
        Framing (mandatory)
            Type: SONETFramingType
            Description: SONET port framing
    Default value: 
        Framing => SONET
    Applicable methods: get_data, set_data, delete_data

    Description: Configure SONET port loopback mode
    Parent objects: 
        SONET
    Values: 
        Loopback (mandatory)
            Type: xsd:string
            Description: SONET port loopback mode:internal,line
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Specify STS identifier (J0/C1) byte
    Parent objects: 
        SONET
    Values: 
        J0 (mandatory)
            Type: Range. Value lies between 0 and 255
            Description: Transmit J0/C1 byte value
    Default value: 
        J0 => 1
    Applicable methods: get_data, set_data, delete_data

    Description: Specify bits s1 and s0 of H1 byte
    Parent objects: 
        SONET
    Values: 
        s1s0 (mandatory)
            Type: Range. Value lies between 0 and 3
            Description: Transmit s1 & s0 bits value
    Default value: 
        s1s0 => 0
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Section Loss of Signal reporting
    Parent objects: 
        SONET
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable SLOS reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Section Loss of Frame reporting
    Parent objects: 
        SONET
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable SLOF reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Line Alarm Indication Signal reporting
    Parent objects: 
        SONET
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable LAIS reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure Line Remote Defect Indication reporting
    Parent objects: 
        SONET
    Values: 
        Configured (mandatory)
            Type: xsd:boolean
            Description: Enable LRDI reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B1 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        SONET
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable B1 BER TCA reporting
    Default value: none.
    Applicable methods: get_data, set_data, delete_data

    Description: Configure B2 BER Threshold Crossing Alert (TCA) reporting
    Parent objects: 
        SONET
    Values: 
        Disabled (mandatory)
            Type: xsd:boolean
            Description: Disable B2 BER TCA reporting
    Default value: none.
    Applicable methods: get_data,