Cisco IOS XR System Error Message Reference Guide, Release 3.7 - Access Control List (ACL) Messages [Cisco IOS XR Software]

Table Of Contents

Access Control List (ACL) Messages

APPS_ES_ACLMGR Messages

ES_ACL Messages

IP_ACL_PARSE Messages

IPV4_ACL_DP Messages

IPV4_ACL_MGR Messages

IPV4_ACL Messages

IPV6_ACL_DAEMON Messages

IPV6_ACL_LTRACE Messages

IPV6_ACL Messages

PFILTER_NETIO_LTRACE Messages

Access Control List (ACL) Messages

This section contains all ACL related System Error Messages. The following facility codes are represented in this module:

•APPS_ES_ACLMGR Messages

•ES_ACL Messages

•IP_ACL_PARSE Messages

•IPV4_ACL_DP Messages

•IPV4_ACL_MGR Messages

•IPV4_ACL Messages

•IPV6_ACL_DAEMON Messages

•IPV6_ACL_LTRACE Messages

•IPV6_ACL Messages

•PFILTER_NETIO_LTRACE Messages

APPS_ES_ACLMGR Messages
Error Message     
%ACL-APPS_ES_ACLMGR-7-ERROR [chars]
Explanation This is simply a debug message. If any severe errors occur the process will exit and will be restarted by the sysmgr.
Recommended Action None

ES_ACL Messages
Error Message     
%ACL-ES_ACL-6-ESACCESSLOGV access-list [chars] ([dec]) [chars] [hex] Outer vlan [dec] dei [dec] cos [dec] inner vlan [dec] dei [dec] cos [dec] [chars] - [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. It has both outer and inner vlan. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None

IP_ACL_PARSE Messages
Error Message     
%ACL-IP_ACL_PARSE-7-ERR_MEM_ALLOC Unable to allocate memory for [chars]
Explanation Memory allocation failed, probably due to memory depletion. An entry could not be added to the cache, the associated command will be blocked by the parser.
Recommended Action None
Error Message     
%ACL-IP_ACL_PARSE-7-ERR_THREAD_MUTEX_LOCK Unable to lock cache mutex. Error: [chars]
Explanation A mutex is used to protect the ACL and Prefix List caches. An attempt to lock a mutex failed with the error reported.
Recommended Action Abort the configuration operation and restart the parser server.

IPV4_ACL_DP Messages
Error Message     
%ACL-IPV4_ACL_DP-4-DUP_NAME '[chars]' is already configured as [chars]
Explanation The name specified in the message has already been used as the feature also specified. If you are configuring an ACL then the name has already been used as a prefix list. And, if you are configuring a prefix-list then the name has already been used as an access list.
Recommended Action Reconfigure the feature with a different name.
Error Message     
%ACL-IPV4_ACL_DP-7-INIT ipv4_acl_dipatch initialization failed at [chars] with error [chars], exiting
Explanation ipv4_acl_dispatch initialization failed at the specified step. The error code is also displayed. If this condition occurs, the sysmgr will restart the ipv4_acl_dispatch process.
Recommended Action None

IPV4_ACL_MGR Messages
Error Message     
%ACL-IPV4_ACL_MGR-7-INIT IPv4 ACL Manager initialisation failed in function [chars]: [chars]
Explanation The ACL manager process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the ACL manager process.
Recommended Action None

IPV4_ACL Messages
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [dec] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGRP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGRP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows.
Recommended Action None
Error Message     
%ACL-IPV4_ACL-7-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]
Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV4_ACL-7-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]
Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_ACL_DAEMON Messages
Error Message     
%ACL-IPV6_ACL_DAEMON-7-INIT Failed to initialize [chars], because of [chars]
Explanation Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the IPv6 daemon if this condition happens.
Recommended Action None

IPV6_ACL_LTRACE Messages
Error Message     
%ACL-IPV6_ACL_LTRACE-3-INIT ltrace_init failed for '[chars]': [chars]
Explanation ltrace_initialization_failed
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV6_ACL Messages
Error Message     
%ACL-IPV6_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars]
Explanation The specified DLL could not be found.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars]
Explanation The specified DLL could not be found.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-1-IPACCESSDLSYM dlsym lookup for ipv6_acl_api_functions failed for dll: [chars]
Explanation dlsym failed for symbol ipv6_acl_api_functions for the specified dll.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-1-IPACCESSDLSYM dlsym lookup for ipv6_acl_api_functions failed for dll: [chars]
Explanation dlsym failed for symbol ipv6_acl_api_functions for the specified dll.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars]
Explanation there is not sufficient memory available to load the specified dll.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars]
Explanation there is not sufficient memory available to load the specified dll.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-3-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]
Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-3-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]
Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [dec] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGRP accesss-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was etected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGRP accesss-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was etected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.
Error Message     
%ACL-IPV6_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]
Explanation A packet matching the log criteria for the given access list was detected.
Recommended Action No action is required.

PFILTER_NETIO_LTRACE Messages
Error Message     
%ACL-PFILTER_NETIO_LTRACE-7-INIT ltrace_init failed for '[chars]': [chars]
Explanation Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the ipv4_aclmgr if this condition happens.
Recommended Action None

	Cisco IOS XR System Error Message Reference Guide, Release 3.7
	Access Control List (ACL) Messages
Cisco IOS XR System Error Message Reference Guide, Release 3.7 Preface Overview Access Control List (ACL) Messages Application Infrastructure Messages Diagnostic Messages Fabric Messages Forwarding Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Layer 3 Messages License Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QoS) Messages Routing Messages Security Messages Services Messages Simple Network Management Protocol (SNMP) Messages Index	Download this chapter Access Control List (ACL) Messages Download the complete book Full Book PDF: Cisco IOS XR System Error Messages, Release 3.7 (PDF - 24 MB) Table Of Contents Access Control List (ACL) Messages APPS_ES_ACLMGR Messages ES_ACL Messages IP_ACL_PARSE Messages IPV4_ACL_DP Messages IPV4_ACL_MGR Messages IPV4_ACL Messages IPV6_ACL_DAEMON Messages IPV6_ACL_LTRACE Messages IPV6_ACL Messages PFILTER_NETIO_LTRACE Messages Access Control List (ACL) Messages This section contains all ACL related System Error Messages. The following facility codes are represented in this module: •APPS_ES_ACLMGR Messages •ES_ACL Messages •IP_ACL_PARSE Messages •IPV4_ACL_DP Messages •IPV4_ACL_MGR Messages •IPV4_ACL Messages •IPV6_ACL_DAEMON Messages •IPV6_ACL_LTRACE Messages •IPV6_ACL Messages •PFILTER_NETIO_LTRACE Messages APPS_ES_ACLMGR Messages Error Message %ACL-APPS_ES_ACLMGR-7-ERROR [chars] Explanation This is simply a debug message. If any severe errors occur the process will exit and will be restarted by the sysmgr. Recommended Action None ES_ACL Messages Error Message %ACL-ES_ACL-6-ESACCESSLOGV access-list [chars] ([dec]) [chars] [hex] Outer vlan [dec] dei [dec] cos [dec] inner vlan [dec] dei [dec] cos [dec] [chars] - [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. It has both outer and inner vlan. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None IP_ACL_PARSE Messages Error Message %ACL-IP_ACL_PARSE-7-ERR_MEM_ALLOC Unable to allocate memory for [chars] Explanation Memory allocation failed, probably due to memory depletion. An entry could not be added to the cache, the associated command will be blocked by the parser. Recommended Action None Error Message %ACL-IP_ACL_PARSE-7-ERR_THREAD_MUTEX_LOCK Unable to lock cache mutex. Error: [chars] Explanation A mutex is used to protect the ACL and Prefix List caches. An attempt to lock a mutex failed with the error reported. Recommended Action Abort the configuration operation and restart the parser server. IPV4_ACL_DP Messages Error Message %ACL-IPV4_ACL_DP-4-DUP_NAME '[chars]' is already configured as [chars] Explanation The name specified in the message has already been used as the feature also specified. If you are configuring an ACL then the name has already been used as a prefix list. And, if you are configuring a prefix-list then the name has already been used as an access list. Recommended Action Reconfigure the feature with a different name. Error Message %ACL-IPV4_ACL_DP-7-INIT ipv4_acl_dipatch initialization failed at [chars] with error [chars], exiting Explanation ipv4_acl_dispatch initialization failed at the specified step. The error code is also displayed. If this condition occurs, the sysmgr will restart the ipv4_acl_dispatch process. Recommended Action None IPV4_ACL_MGR Messages Error Message %ACL-IPV4_ACL_MGR-7-INIT IPv4 ACL Manager initialisation failed in function [chars]: [chars] Explanation The ACL manager process encountered the specified error while initializing the specified facility. If this error occurs, the sysmgr process will restart the ACL manager process. Recommended Action None IPV4_ACL Messages Error Message %ACL-IPV4_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [dec] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGRP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGRP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option. Any access list entry that has had hits are logged via this message. These messages are issued either at 5 minute intervals, or whenever the log buffer overflows. Recommended Action None Error Message %ACL-IPV4_ACL-7-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars] Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV4_ACL-7-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars] Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. IPV6_ACL_DAEMON Messages Error Message %ACL-IPV6_ACL_DAEMON-7-INIT Failed to initialize [chars], because of [chars] Explanation Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the IPv6 daemon if this condition happens. Recommended Action None IPV6_ACL_LTRACE Messages Error Message %ACL-IPV6_ACL_LTRACE-3-INIT ltrace_init failed for '[chars]': [chars] Explanation ltrace_initialization_failed Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. IPV6_ACL Messages Error Message %ACL-IPV6_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars] Explanation The specified DLL could not be found. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars] Explanation The specified DLL could not be found. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-1-IPACCESSDLSYM dlsym lookup for ipv6_acl_api_functions failed for dll: [chars] Explanation dlsym failed for symbol ipv6_acl_api_functions for the specified dll. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-1-IPACCESSDLSYM dlsym lookup for ipv6_acl_api_functions failed for dll: [chars] Explanation dlsym failed for symbol ipv6_acl_api_functions for the specified dll. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars] Explanation there is not sufficient memory available to load the specified dll. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars] Explanation there is not sufficient memory available to load the specified dll. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-3-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars] Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-3-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars] Explanation The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [dec] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGRP accesss-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was etected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGRP accesss-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was etected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. Error Message %ACL-IPV6_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars] Explanation A packet matching the log criteria for the given access list was detected. Recommended Action No action is required. PFILTER_NETIO_LTRACE Messages Error Message %ACL-PFILTER_NETIO_LTRACE-7-INIT ltrace_init failed for '[chars]': [chars] Explanation Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the ipv4_aclmgr if this condition happens. Recommended Action None
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks