Cisco IOS XR System Error Reference Guide for XR12000 Series Platform Specific Messages, Release 3.4 - Forwarding Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Forwarding Messages

FIB_IPV4 Messages

FIB_IPV6 Messages

FWD_EDGE_ADJ Messages

FWD_HAL Messages

FWD_L2HAL Messages

Forwarding Messages

This section contains all Forwarding Information Base (FIB) related and Cisco Express Forwarding (CEF) related System Error Messages. The following facility codes are presented in this module:

•FIB_IPV4 Messages

•FIB_IPV6 Messages

•FWD_EDGE_ADJ Messages

•FWD_HAL Messages

•FWD_L2HAL Messages

FIB_IPV4 Messages
Error Message     
%FORWARDING-FIB_IPV4-3-GEN_ERR FIB IPV4 internal error: [chars]
Explanation An internal software error occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FIB_IPV4-5-RECURSIVE_LOOP FIB IPv4 Recursive loop: [chars]
Explanation Recursive loop was detected. The route update will be dropped
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FIB_IPV6 Messages
Error Message     
%FORWARDING-FIB_IPV6-3-GEN_ERR FIB IPV6 internal error: [chars]
Explanation An internal software error occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FIB_IPV6-5-RECURSIVE_LOOP FIB IPv6 Recursive loop: [chars]
Explanation Recursive loop was detected. The route update will be dropped
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FWD_EDGE_ADJ Messages
Error Message     
%FORWARDING-FWD_EDGE_ADJ-2-EDGE_ADJ_ERR GSR edge adj dll layer internal error [chars] : [chars]
Explanation A runtime error occurred in GSR adj's egine layer. The reason for the failure is displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FWD_HAL Messages
Error Message     
%FORWARDING-FWD_HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars]
Explanation A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-ADJ_ERR GSR adj internal error: [chars]
Explanation A runtime error occurred in GSR adj module.The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars]
Explanation A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-FASTCONV_CLI_ERR FastConvergence CLI: [chars], error: [chars]
Explanation A runtime error occurred while apply the Fast convergence CLI. The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-HW_OCE_NULL [chars] - GSR HAL internal error: hal object ([chars]) getting a NULL hw_oce
Explanation A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-INIT [chars], error: [dec] [chars]
Explanation A runtime error occurred while initalizing GSR Hardware Abstraction Layer (HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-INVALID_PARENT_OBJ GSR FIB internal error: [chars] failed to get parent [chars] obj - [chars]
Explanation A runtime error occurred in GSR FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-LDI_ERR GSR loadinfo internal error: [chars]
Explanation A runtime error occurred in GSR loadinfo module.The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-PFX_ERR GSR prefix internal error: [chars]
Explanation A runtime error occurred in GSR prefix module.The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-SHMWIN_ERR [chars], error: [dec] [chars]
Explanation A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-STATS_INTF_REGISTER Failed to register interface [hex] with Stats module, error: [dec] [chars]
Explanation A runtime error occurred while trying to register the specified interface with Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-STATS_INTF_UNREGISTER Failed to unregister interface [hex] from Stats module, error: [dec] [chars]
Explanation A runtime error occurred while trying to unregister the specified interface from Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-STATS_VALIDATION Stats validation error: [chars] ([dec]): [chars]
Explanation A validation error occurred while doing an LSP/TE statistics operation. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources
Explanation The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-2-USED_BY_BGP_STATUS_CHANGE Used by BGP status changed from [chars] to [chars] on obj 0x[pointer]
Explanation Used by BGP status on the loadinfo changed. This is not generally expected and config needs to be examined to understand the cause. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-3-PM_ERR Platform Manager returned an error looking up interface [hex]: [chars]
Explanation A runtime error occured, whereby Platform Manager returned an unexpected error while looking up an interface. If the error is 'Resource temporarily unavailable' then the error is not fatal. Any other error is unexpected, and more serious.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-3-PP_NFN_LIB_GET_INFO Error encountered by HAL ppinfo notification library while receiving ppinfo notification batch. Error: [chars]
Explanation An error was encountered while processing a notification of a change to the packet path info for one or more adjacencies. Forwarding for the affected adjacencies may now be inconsistent.
Recommended Action Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-3-PP_NFN_MSG_HDLR Error handling a [chars] message from a HAL ppinfo notification client. Error: [chars] ([chars])
Explanation An error was encountered while processing a message of the given type from client for HAL notifications of changes to the packet path info for adjacencies for a given interface type. Forwarding for the affected adjacencies may now be inconsistent.
Recommended Action Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_HAL-6-FASTCONVERGENCE_CLI_INFO WARNING: This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0
Explanation This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0
Recommended Action Please reload the node using the command hw-module reload location r/s/CPU0

FWD_L2HAL Messages
Error Message     
%FORWARDING-FWD_L2HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars]
Explanation A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_L2HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars]
Explanation A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_L2HAL-2-HW_OCE_NULL [chars] - GSR L2 HAL internal error: hal object ([chars]) getting a NULL hw_oce
Explanation A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_L2HAL-2-INIT [chars], error: [dec] [chars]
Explanation A runtime error occurred while initalizing GSR Layer 2 VPN Hardware Abstraction Layer (L2 HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_L2HAL-2-INVALID_PARENT_OBJ GSR L2 FIB internal error: [chars] failed to get parent [chars] obj - [chars]
Explanation A runtime error occurred in GSR L2 FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_L2HAL-2-SHMWIN_ERR [chars], error: [dec] [chars]
Explanation A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%FORWARDING-FWD_L2HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources
Explanation The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

	Cisco IOS XR System Error Reference Guide for XR12000 Series Platform Specific Messages, Release 3.4
	Forwarding Messages
Cisco IOS XR System Error Reference Guide for XR12000 Series Platform Specific Messages, Release 3.4 Preface Overview Access Control List (ACL) Messages Diagnostic Messages Forwarding Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QoS) Messages Routing Messages Index	Download this chapter Forwarding Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for XR12000 Series Platform Specific Messages (PDF - 3 MB) Feedback Table Of Contents Forwarding Messages FIB_IPV4 Messages FIB_IPV6 Messages FWD_EDGE_ADJ Messages FWD_HAL Messages FWD_L2HAL Messages Forwarding Messages This section contains all Forwarding Information Base (FIB) related and Cisco Express Forwarding (CEF) related System Error Messages. The following facility codes are presented in this module: •FIB_IPV4 Messages •FIB_IPV6 Messages •FWD_EDGE_ADJ Messages •FWD_HAL Messages •FWD_L2HAL Messages FIB_IPV4 Messages Error Message %FORWARDING-FIB_IPV4-3-GEN_ERR FIB IPV4 internal error: [chars] Explanation An internal software error occurred Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FIB_IPV4-5-RECURSIVE_LOOP FIB IPv4 Recursive loop: [chars] Explanation Recursive loop was detected. The route update will be dropped Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. FIB_IPV6 Messages Error Message %FORWARDING-FIB_IPV6-3-GEN_ERR FIB IPV6 internal error: [chars] Explanation An internal software error occurred Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FIB_IPV6-5-RECURSIVE_LOOP FIB IPv6 Recursive loop: [chars] Explanation Recursive loop was detected. The route update will be dropped Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. FWD_EDGE_ADJ Messages Error Message %FORWARDING-FWD_EDGE_ADJ-2-EDGE_ADJ_ERR GSR edge adj dll layer internal error [chars] : [chars] Explanation A runtime error occurred in GSR adj's egine layer. The reason for the failure is displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. FWD_HAL Messages Error Message %FORWARDING-FWD_HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars] Explanation A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-ADJ_ERR GSR adj internal error: [chars] Explanation A runtime error occurred in GSR adj module.The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars] Explanation A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-FASTCONV_CLI_ERR FastConvergence CLI: [chars], error: [chars] Explanation A runtime error occurred while apply the Fast convergence CLI. The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-HW_OCE_NULL [chars] - GSR HAL internal error: hal object ([chars]) getting a NULL hw_oce Explanation A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-INIT [chars], error: [dec] [chars] Explanation A runtime error occurred while initalizing GSR Hardware Abstraction Layer (HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-INVALID_PARENT_OBJ GSR FIB internal error: [chars] failed to get parent [chars] obj - [chars] Explanation A runtime error occurred in GSR FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-LDI_ERR GSR loadinfo internal error: [chars] Explanation A runtime error occurred in GSR loadinfo module.The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-PFX_ERR GSR prefix internal error: [chars] Explanation A runtime error occurred in GSR prefix module.The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-SHMWIN_ERR [chars], error: [dec] [chars] Explanation A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-STATS_INTF_REGISTER Failed to register interface [hex] with Stats module, error: [dec] [chars] Explanation A runtime error occurred while trying to register the specified interface with Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-STATS_INTF_UNREGISTER Failed to unregister interface [hex] from Stats module, error: [dec] [chars] Explanation A runtime error occurred while trying to unregister the specified interface from Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-STATS_VALIDATION Stats validation error: [chars] ([dec]): [chars] Explanation A validation error occurred while doing an LSP/TE statistics operation. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources Explanation The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-2-USED_BY_BGP_STATUS_CHANGE Used by BGP status changed from [chars] to [chars] on obj 0x[pointer] Explanation Used by BGP status on the loadinfo changed. This is not generally expected and config needs to be examined to understand the cause. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-3-PM_ERR Platform Manager returned an error looking up interface [hex]: [chars] Explanation A runtime error occured, whereby Platform Manager returned an unexpected error while looking up an interface. If the error is 'Resource temporarily unavailable' then the error is not fatal. Any other error is unexpected, and more serious. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-3-PP_NFN_LIB_GET_INFO Error encountered by HAL ppinfo notification library while receiving ppinfo notification batch. Error: [chars] Explanation An error was encountered while processing a notification of a change to the packet path info for one or more adjacencies. Forwarding for the affected adjacencies may now be inconsistent. Recommended Action Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-3-PP_NFN_MSG_HDLR Error handling a [chars] message from a HAL ppinfo notification client. Error: [chars] ([chars]) Explanation An error was encountered while processing a message of the given type from client for HAL notifications of changes to the packet path info for adjacencies for a given interface type. Forwarding for the affected adjacencies may now be inconsistent. Recommended Action Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_HAL-6-FASTCONVERGENCE_CLI_INFO WARNING: This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0 Explanation This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0 Recommended Action Please reload the node using the command hw-module reload location r/s/CPU0 FWD_L2HAL Messages Error Message %FORWARDING-FWD_L2HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars] Explanation A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_L2HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars] Explanation A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_L2HAL-2-HW_OCE_NULL [chars] - GSR L2 HAL internal error: hal object ([chars]) getting a NULL hw_oce Explanation A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_L2HAL-2-INIT [chars], error: [dec] [chars] Explanation A runtime error occurred while initalizing GSR Layer 2 VPN Hardware Abstraction Layer (L2 HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_L2HAL-2-INVALID_PARENT_OBJ GSR L2 FIB internal error: [chars] failed to get parent [chars] obj - [chars] Explanation A runtime error occurred in GSR L2 FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_L2HAL-2-SHMWIN_ERR [chars], error: [dec] [chars] Explanation A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %FORWARDING-FWD_L2HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources Explanation The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks