-
Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.4
-
Preface
-
Overview
-
Access Control List (ACL) Messages
-
Default Messages
-
Diagnostic Messages
-
Fabric Messages
-
Forwarding Messages
-
High Availability (HA) Messages
-
Installation Messages
-
Internet Protocol (IP) Messages
-
Layer 1 Messages
-
Layer 2 Messages
-
License Messages
-
Media Messages
-
Manageablity (MGBL) Messages
-
Operating System (OS) Messages
-
Packet Infrastructure Messages
-
Platform Messages
-
Quality of Service (QoS) Messages
-
Routing Messages
-
Security Messages
-
Service Messages
-
Simple Network Management Protocol (SNMP) Messages
-
System Database Messages
-
Index
-
Feedback
Table Of Contents
Security Messages
This section contains all Security related System Error Messages, sucyh as AAA, IPSec and related protocols, and so forth. The following facility codes are represented in this module:
aaa_task Messages
Error Message%SECURITY-aaa_task-3-DEBUG_ERROR [chars]: [chars]
Explanation Error message from AAA task debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-aaa_task-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]
Explanation Error message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-aaa_task-3-INVALID_AAA_TASK_DEBUG_FLAG AAA task debug flag [dec] does not exist
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-aaa_task-7-GENERIC_ERROR [chars]: [chars]
Explanation Internal debugging message.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
AAA Messages
Error Message%SECURITY-AAA-3-DEBUG_ERROR [chars]: [chars]
Explanation Encountered an error in debug module.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-DEBUG_ERROR [chars]: [chars]
Explanation Error encountered in debug module.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-DES_INIT_FAIL [chars]: DES initialization failed
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-DLL_INIT_ERROR [chars]: [chars]
Explanation Error encountered while initializing AAA client library DLL.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-DLLMAIN_ERROR Error encountered while initializing DLL for [chars]: [chars]
Explanation Error message from DLL initialization module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERR_SERVER_GROUP [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-ERROR_NO_MEM Not enough memory available while [chars]
Explanation Failed to allocate necessary memory.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-INVALID_DEBUG_FLAG The AAA debug flag [dec] does not exist
Explanation The debug flag specified is not supported.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-3-LIB_UTIL_ERROR_NO_MEM Not enough memory available while [chars]
Explanation Failed to allocate memory.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-4-WHITESPACE_TRUNCATED_IN_SERVER_KEY WARNING: The server key contained trailing whitespace and was truncated
Explanation Whitespace is not allowed at the end of a server key.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-7-ERR_ECM Failed to open event connection for a [chars]: [chars]
Explanation The initial connection failed, but a retry has been successfully rescheduled.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-AAA-7-ERR_SYSDB [chars] path [chars]: [chars]
Explanation 'Failed to execute a SysDB operation'
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
ACE_GRP Messages
Error Message%SECURITY-ACE_GRP-3-ERROR [chars]: [chars]
Explanation An error occurred in ace_grp dll
Recommended Action *SH_TECH*
ACE_LC Messages
Error Message%SECURITY-ACE_LC-0-ACE_SYSLOG_EMERG [[dec]][chars]
Explanation ACE SPA SYSLOG message
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_LC-1-ACE_SYSLOG_ALERT [[dec]][chars]
Explanation ACE SPA SYSLOG message
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_LC-2-ACE_SYSLOG_CRIT [[dec]][chars]
Explanation ACE SPA SYSLOG message
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_LC-2-ACE_SYSLOG_ERR [[dec]][chars]
Explanation ACE SPA SYSLOG message
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_LC-3-ERR [chars]: [chars]
Explanation ACE Driver Fatal Error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_LC-4-ACE_SYSLOG_WARNING [[dec]][chars]
Explanation ACE SPA SYSLOG message
Recommended Action 'If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_LC-4-WARNING [chars]: [chars]
Explanation ACE driver warning message.
Recommended Action 'If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_LC-5-ACE_SYSLOG_NOTICE [[dec]][chars]
Explanation ACE SPA SYSLOG message
Recommended Action 'No action is required.'
Error Message%SECURITY-ACE_LC-6-ACE_SYSLOG_INFO [[dec]][chars]
Explanation ACE SPA SYSLOG message
Recommended Action 'No action is required.'
Error Message%SECURITY-ACE_LC-6-INFO [chars]: [chars]
Explanation ACE driver Informational message
Recommended Action 'No action is required.'
ACE_TSB_LC Messages
Error Message%SECURITY-ACE_TSB_LC-3-ERR [chars]
Explanation ACE TSB Fatal Error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_TSB_LC-6-INFO [chars]: [chars]
Explanation ACE TSB Informational message
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_TSB_LC-6-WARNING [chars]: [chars]
Explanation ACE TSB warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-ACE_TSB_LC-7-DEBUG [chars]: [chars]
Explanation ACE TSB Debug Information
Recommended Action 'No action is required.'
CEPKI Messages
Error Message%SECURITY-CEPKI-6-ERR [chars]
Explanation CEPKI general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CEPKI-6-ERR_2 [chars] [chars]
Explanation CEPKI general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CEPKI-6-INFO [chars]
Explanation CEPKI general info message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-CEPKI-6-WARNING [chars]
Explanation CEPKI general warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
COND_DEB_RP Messages
Error Message%SECURITY-COND_DEB_RP-3-INSUFMEM Failed to allocate memory
Explanation The requested operation could not be accomplished because of a low memory condition.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message%SECURITY-COND_DEB_RP-3-NOCONDDBG Crypto conditional debug does not work.
Explanation The request to use condition for a crypto debug message could not be accomplish.
Recommended Action If displaying of crypto debug messages is needed, please use regular crypto debug mechanism instead of conditional crypto debug mechanism.
Error Message%SECURITY-COND_DEB_RP-3-NOIPCONDDBG Crypto conditional debug using IP address does not work.
Explanation The request to use using IP address as condition for a crypto debug message could not be accomplish.
Recommended Action If displaying of crypto debug messages is needed, please use regular crypto debug mechanism instead of conditional crypto debug mechanism.
Error Message%SECURITY-COND_DEB_RP-6-ILLIPVAL Illegal IP-address/IP-mask was configured.
Explanation Illegal IP-address and/or IP-mask were configuring as condition to crypto debug message.
Recommended Action Fix the values of IP-address and/or IP-mask in the 'ìdeugb condition crypto IPv4...' Öî command.
IKE Messages
Error Message%SECURITY-IKE-3-ACCT_MSG_TX_FAILURE Failed to send an Accounting record of type: [chars], error: [chars]
Explanation An error occured while attempting to send an accounting record to the external AAA server
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IKE-3-ADD_KEY_FAIL IKE detects failure adding key, name [chars], ip address [unsigned int]
Explanation IKE found failure when adding key
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-AUTH_FAIL IKE detects failure during authentication [dec], [unsigned int]
Explanation IKE found failure during authentication
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-BAD_CERT_USE IKE detects bad certificate was used, [chars], [chars]
Explanation IKE found bad certificate was used
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-BAD_DOI_NOTIFY IKE detects bad DOI notify, DOI is [dec], address is [unsigned int]
Explanation IKE found bad DOI notify
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-BADMAGIC Bad [chars] magic number ([hex]).
Explanation 'An internal software error.'
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-CRYPT_FAILURE IKE detects en/de-crypto services failure, [unsigned int], [chars]
Explanation IKE found failure returned from en/de-crypto services
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_2_PARAM [chars], [chars]
Explanation IKE general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERR_NO_MEMORY Out of memory
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-ERROR [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-GROUP_CONFIG_UPLOAD_LOCAL_AAA_FAILED Failed to upload the IKE groups from the running config to the local AAA server. rc=[dec], errpr=[chars]
Explanation An error occured while the IKE process was uploading its localy configured groups to the localy running AAA server. This means that the system is in inconsistent state. the IKE groups that are seen in the running config are not configured in the local AAA DB that can be seen using 'show aaa ikegroups'.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IKE-3-IKEINIT [chars]
Explanation An IKE initialization error
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-INVAL_CERT IKE detects invalid certificate [chars], [chars]
Explanation IKE found invalid certificate
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-IP_AP_NOTIFY_INUSE_ADDRESS_FAILED Failed to notify about a used IP address to the Address Pool component. pool=[chars], vrf=[chars], IP=[chars], err=[chars]
Explanation An error occured while attempting to notify IP local Address Pool about used addresses
Recommended Action 'Try to disable ipsec-chkpt and restart IKE process'
Error Message%SECURITY-IKE-3-IP_POOL_FREE_FAILURE Failed to free a local pool IP address : poolname=[chars], ip=[chars]
Explanation An error occured while attempting to free an IP address back to the local pool
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IKE-3-ISAKMP_PACKET_TOO_LONG ISAKMP packet is too long. size:[dec] Bytes, max allowed:[dec] Bytes.
Explanation Trying to send an ISAKMP packet that is above the maximum UDP packet size allowed.
Recommended Action Try to reduce the number of ISAKMP policies offered.
Error Message%SECURITY-IKE-3-MQ_FAIL [chars]:Failed on [chars]:[chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IKE-3-NO_ID_CERT_ADDR_MATCH IKE detects no ID certificate address match [unsigned int], [dec], [unsigned int]
Explanation IKE found no ID certificate address match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-NO_ID_CERT_DN_MATCH IKE detects no ID certificate DN match [chars], [dec], [chars]
Explanation IKE found no ID certificate DN match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-NO_ID_CERT_FQDN_MATCH IKE detects no ID certificate FQDN match [chars], [dec], [chars]
Explanation IKE found no ID certificate FQDN match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-NO_ID_CERT_USER_FQDN_MATCH IKE detects no ID certificate user FQDN match [chars], [dec], [chars]
Explanation IKE found no ID certificate user FQDN match
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-QUERY_KEY IKE detects failure when querying key
Explanation IKE found failure when querying key
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-SA_NOT_AUTH IKE detects the sa is not authenticated [chars]
Explanation IKE found the sa has not been authenticated
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-SA_NOT_OFFERED IKE detects SA not being offered [unsigned int], [chars]
Explanation IKE found SA not offered
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-3-SESSION_NOT_FOUND Session Node not found, system may be inconsistent.
Explanation An error occured while attempting to find an expected Session Node in the DB
Recommended Action 'try to disable ipsec-chkpt and restart IPSec process'
Error Message%SECURITY-IKE-4-BAD_MESSAGE IKE message from [chars] failed its sanity check or is malformed
Explanation A quick sanity check is done on all received ISAKMP messages to verify that all component payload types are valid, and that the sum of their individual lengths equals the total length of the received message. This message failed the sanity check. Persistantly bad messages could be a denial of service attack or bad decryption.
Recommended Action 'Contact the remote peer's administrator.'
Error Message%SECURITY-IKE-4-NO_SA IKE message from [chars] has no SA and is not an initialization offer
Explanation IKE maintains state for a communication in the form of security associations. No security association exists for this packet and it is not an initial offer from the peer to establish one. This situation could denote a denial of service attack.
Recommended Action 'Contact the remote peer and/or his administrator'
Error Message%SECURITY-IKE-4-WARNING [chars]
Explanation Internal Warning.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-4-WARNING2 [chars], [chars]
Explanation Internal Warning.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IKE-6-BAD_DOI_SA DOI value [dec] from SA offer from [chars] is invalid
Explanation The DOI field of an SA offer defines how to parse the fields SAs with an unknown DOI cannot be parsed
Recommended Action 'If this situation persists contact the remote peer's administrator'
Error Message%SECURITY-IKE-6-MODE_FAILURE Processing of [chars] mode failed with peer at [chars]
Explanation Negotiation with the remote peer failed.
Recommended Action 'If this situation persists contact the remote peer'
Error Message%SECURITY-IKE-6-NOT_ENCRYPTED IKE packet from [chars] was not encrypted and it should've been.
Explanation A portion of the IKE exchange takes place in the clear and a portion is encrypted. This message should have been encrypted but was not.
Recommended Action 'Contact remote peer'
Error Message%SECURITY-IKE-6-UNK_EXCHANGE IKE peer at [chars] sent a message with unknown exchange [dec]
Explanation IKE preforms actions on messages based on defined exchanges. The message received had an unknown exchange.
Recommended Action 'Contact the remote peer's administrator'
IMP Messages
Error Message%SECURITY-IMP-3-CONFIG_ERR [chars]
Explanation Crypto Configuration (SAs/ACLs) failed *SUPPORT*
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IMP-3-FATAL_ERR [chars]
Explanation An internal software fatal error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IMP-3-MQ_FAIL [chars]:Failed on [chars]:[chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-IMP-4-MSG_WARN [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
IPP Messages
Error Message%SECURITY-IPP-3-ERR_GENERAL [chars] [chars]
Explanation Error description, error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IPP-3-ERR_MALLOC Cannot allocate memory in function [chars]()
Explanation Internal error. System is out of memory - malloc failed.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-IPP-6-INFO_GENERAL [chars]
Explanation The IPSec IPP encountered some problem in genric nature or plain information.
Recommended Action 'No action is required.'
KEYCHAIN Messages
Error Message%SECURITY-KEYCHAIN-3-FATAL_ERR [chars]
Explanation An internal software fatal error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-KEYCHAIN-4-MSG_WARN Receive invalid message type [dec]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
login Messages
Error Message%SECURITY-login-2-AUTHEN_FAILED Failed authentication attempt by user '[chars]' from '[chars]'
Explanation Error message from debug module
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-DEBUG_ERROR Failed to [chars] debug module: [chars]
Explanation Failed to initialize or shutdown the debug module.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-DLLMAIN_ERROR Error encountered while initializing the DLL, path [chars]: [chars]
Explanation Error message from debug initialization module.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-INVALID_LOGIN_DEBUG_FLAG The login debug flag [dec] does not exist
Explanation The debug flag specified is not supported.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-login-3-NO_MEMORY Not enough memory was available while [chars]
Explanation Failed to allocate necessary memory.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
PKI Messages
Error Message%SECURITY-PKI-6-ERR_1_PARAM [chars]
Explanation CEPKI general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-ERR_2_PARAM [chars] [chars]
Explanation CEPKI general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-PKI-6-LOG_INFO [chars]
Explanation CEPKI general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
RADIUSD Messages
Error Message%SECURITY-RADIUSD-3-ACCT_NOTIFY_FAIL Failed to notify the completion of accounting to sender - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ADD_SYS_IP_ADDR_ATTR_ERR Adding NAS IP address failed, omitted: [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ADD_VSA_FAIL Failed to add VSA av-pair [dec] with [chars] - [chars]
Explanation Failure encountered while adding a VSA.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_AVPAIR Bad AAA avpair [dec] with length [dec] detected
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_MSG_TYPE Unsupported message type [dec] encountered while [chars]
Explanation Found an unsupported AAA message type in avlist.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_FORMAT_BIT Format bit is not set for VSA [chars]
Explanation Format bit is not set for VSA %s according to table bitmap.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_LENGTH Inconsistent [chars] VSA length [dec] was encountered
Explanation VSA format error found in radiusd while translating.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_TYPE Bad [chars] VSA type [dec] with vendor_id [dec] encountered, possibily out of range
Explanation VSA format error found in radiusd while translating.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAD_VSA_VENDOR Vendor specified for VSA [chars] is not recognized
Explanation Vendor specified for the VSA is not recognized according to table bitmap. An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAG_ENCODE_ERR Failed to encode [chars] bag: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-BAGS_UNREG_ERR Failed to unregister bag [chars]: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-CONFIG_ERR Encountered configuration error while [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-DEBUG_ERROR [chars]: [chars]
Explanation Error encountered in debug module.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EDM_INIT_ERR Failed to register EDM - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_CREATE_SERVER_ENTRY Failed to create a server entry: [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_CREATESG Unable to apply server group '[chars]' configuration: [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SET_SERVER_ENTRY Error while setting or unsetting a parameter in server entry: [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_SYSDBBIND Failed to bind to SysDB at [chars]: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ERR_TTY_IFH_PRESENT Both ttyname ([chars]) and ifh ([hex]) are present in the message
Explanation In the AV pair message recieved from the radiusd clients should have either ttyname or interface handle, not both.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Failed to attach handler for async events: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-IP_ADDR_TOO_LONG_ERR IP address [chars] is too long ([dec])
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-LOCKING Failed to obtain or release [chars] lock (error: [chars])
Explanation radiusd has either failed to obtain or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MEMORY Failed to malloc [unsigned int] bytes
Explanation radiusd has failed to allocate the required amount of memory.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MSG_ERROR [chars]: [chars]
Explanation Error encountered while handling messages received by tacacsd.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-MSG_SIZE_ERR [chars]: size [dec] - [chars]
Explanation An internal error occurred
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-NOT_VSA The specified attribute [dec] is a non-VSA radius attribute
Explanation Encountered a non VSA attribute.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-PARAMETER [chars]
Explanation RADIUS was passed an invalid parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RIB_BIND_ERR Binding to RIB failed: [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-RIB_LOCAL_ADDRESS_ERR NAS IP not found; address omitted: [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SERVER_MUTEX_INIT_FAILED Failed to initialize mutex in radiusd
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SETPRIO_FAILED Changing priority failed [dec]
Explanation Attempt to change priority failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-SHUTDOWN_ERROR [chars]: [chars]
Explanation TACACS+ process failed to shutdown properly.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-STARTUP_ERROR [chars]: [chars]
Explanation TACACS+ process failed to startup properly.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR1 daemon VSA [dec] does not match type string in [chars].
Explanation VSA format error in daemon user config.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR2 Parsing error on daemon VSA '[chars]' (no protocol or type field)
Explanation VSA format error in daemon user configuration.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR3 Parsing error on daemon VSA '[chars]' (no value field or invalid length)
Explanation VSA format error in daemon user configuration.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR4 Parsing error on daemon VSA '[chars]', order number [dec] (not 0-254) is not supported
Explanation VSA format error in daemon user configuration.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_FORMAT_ERR5 Parsing error on daemon VSA '[chars]' (invalid type field)
Explanation VSA format error in daemon user configuration.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_NOTFOUND VSA [dec] ([chars]) not found in daemon-to-nas tables after string comparing
Explanation VSA not found in the deamon to NAS mapping table.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-VSA_TABLE_ERROR Table [chars] entry [dec] has inconsistent ignore flag and standard attribute type
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-3-ZERO_TIMER_REPEATEDLY_EXPIRING_ERROR [chars]: [dec] [dec]
Explanation The deadtimer expiry event repeatedly occured with a deadtime value of zero. This could lead to cpu hogging by radiusd process.
Recommended Action Restarting radiusd process should get around the problem.
Error Message%SECURITY-RADIUSD-4-CERR_REGISTER [chars]: [chars]
Explanation radiusd failed to register error codes.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-IFHANDLE_NULL WARNING: Cannot obtain handle for the interface [chars]: [chars]
Explanation Error encountered while obtaining handle for the interface specified as the source interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-IP_ADDRESS_NOT_FOUND WARNING: No IP address configured for [chars], using default address instead: [chars]
Explanation There is no IP address configured for the specified interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-NO_IP_ADDRESS WARNING: No IP address has been configured for [chars]
Explanation There is no IP address configured for the specified interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-NOSUCH_INTF WARNING: Specified source interface [chars] is not present: [chars]
Explanation The interface specified as source interface is not present.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-RADIUS_NOSERV Warning: Server [chars]/[dec]/[dec] is not defined
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-4-SRCINTF_NOTUP WARNING: Specified source interface [chars] is not UP
Explanation The interface specified as source interface is not UP.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-BAD_ATTR_LENGTH Encountered bad attribute length [dec] (attr [dec]) while [chars], ignored
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-BAD_ATTR_TYPE Encountered bad attribute type [dec] while [chars], ignored
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_ACCT_ID Cannot convert accounting task id to accounting session id: [chars]
Explanation Accounting task id is probably larger than 2^24 - 1
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_BAD_REPLY_ATTR reply attr size=[dec] not equal to sum of parts=[dec]
Explanation The length of the reply attribute does not equal its parts.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_BAD_SESSID_ATTR Using incorrect AAA attribute for RAD_ACCT_SESSID_ATTR [chars]
Explanation Check consistancy between radius_table and nas_to_daemon_av_table
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_LEAFTIMER Cannot allocate leaf timer - [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SOCKET_BIND_FAIL Error in binding socket: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-ERR_SOCKETFAIL Error in opening socket: [chars]
Explanation None at this time
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-EVENT_CONN_DESTROY_FAILED Event connection destroy failed while [chars]: [chars]
Explanation An internal software error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-EVENT_CONN_INIT_FAILED Failed to initialize event connection for [chars] (error: [chars])
Explanation An internal software error occured
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-GOT_CISCO_VSA Encountered a Cisco VSA while processing non Cisco VSAs
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INTRFC_STATE_QUERY_FAILED Cannot query state of interface [chars] (source interface not applied): [chars]
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INVALID_AUTHOR_TYPE Invalid authorization type [dec] encountered while [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-INVALID_VSA Found invalid VSA attr [dec] while [chars], ignored
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-LEN_TOO_LONG Length of attribute [chars] exceeds limit [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-SNPRINTF_FAIL snprintf failed while [chars]: [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-6-UNSUPPORTED_VENDOR Found unsupported vendor id [dec] while [chars], ignored
Explanation An internal software error has occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-RADIUSD-7-GENERIC_ERROR [chars]: [chars]
Explanation Generic error message used for internal debugging.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
SAM Messages
Error Message%SECURITY-SAM-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_INVALID_DEVICE Invalid device name '[chars]'
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have SAM index entry
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_NO_MEMORY Out of memory
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_REG_MSGNO Could not register SAM_MSGNO message handler for message id [dec]: [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_SYSDB_SET Failed to set item [chars] in SysDB: [hex], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-ERR_WR_FILE Failed writing file : [chars], [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-WARN_NVRAM NVRAM is not available, nvram process might have been down.
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-3-WARN_SPM SPM is not available, [chars].
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-CAUGHT_SIGNAL server terminating..
Explanation SAM server caught a signal, and terminated
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-NO_BK_LOG SAM log backup file is not present, will try to recover the backup log from SysDB
Explanation For some reason, the backup file of SAM log has disappeared.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-SYSDB_INTEGRITY Cannot guarantee the integrity of SAM SysDB name space, SAM internal tables had been discarded, and will try to recover from backup files.
Explanation Found digest mistmatch for SAM's SysDB name space, the SAM portion of SysDB had been deleted. If SAM backup files exists, this should not impact SAM's functionality; otherwise, CA root certificate and CRL will be lost
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-WARN_CA_CERT_EXPIRED SAM detects the CA certificate had expired, but accepted by user
Explanation SAM found the expired CA certificate in table had been accepted by user.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-4-WARN_CSS_CERT_EXPIRED SAM detects the PIE certificate had expired, but accepted by user
Explanation SAM found the expired CSS certificate in table had been accepted by user.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-ERR_1_PARAM [chars]
Explanation SAM general error message with one prameter.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-ERR_2_PARAM [chars], [chars]
Explanation SAM general error message with two prameters.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_CHANGE_NOT_PERSISTENT SAM found no ENA device with sufficient space to backup the modified SAM table, the change will not be persistent until a successful ENA installation on a flash device.
Explanation SAM found there is nowhere to backup the modified SAM table.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_DIGEST_FILE_MISSING Secure digest file is not found, cannot guarantee the integrity of memory installed files.
Explanation SAM found digest file in NVRAM is missing, discard the memory packages.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_DIGEST_FILE_REINIT Secure digest file not present, SAM will re-init the secure digest file
Explanation SAM found digest file missing from NVRAM, re-init the file.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_INIT_LOG_BACKUP_FILE SAM failed to initialize log backup file
Explanation SAM failed to initalize log backup file in NVRAM, log entry not backed up
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARN_MEM_DIGEST SAM will remove backup files for memory digest tables and users MUST re-install the memory packages.
Explanation SAM found MEM digest compare not successful, discard the memory packages.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARNING [chars]
Explanation SAM general warning message.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SAM-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
sIMP Messages
Error Message%SECURITY-sIMP-3-FATAL_ERR [chars]
Explanation An internal software fatal error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-sIMP-4-ITI_WARN [chars] [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-sIMP-4-MSG_WARN [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
SPM Messages
Error Message%SECURITY-SPM-3-ERR_CHAN_CONNECT Message chan connect ([chars]) failed
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_ENTRY_FIND Unable to find a delete entry for : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_INVALID_EVENT SPM server received invalid event : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_MALLOC Cannot allocate memory in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_MSG_GEN [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_OPEN_SECURE Error in opening secure file : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PTHREAD_CREATE pthread create error : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PTHREAD_INIT pthread attr init error : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PTHREAD_SET pthread set detach state error : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_PULSE_CODE Unknown pulse code ([dec]) received
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_REG_HANDLER Could not register async handlers : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_REG_MSG Could not register SPM_MSGNO message handler for message id - [dec] : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_REPLY_FAIL Could not reply to client message : [chars]
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SPM-3-ERR_TOKEN_MISMATCH Delete file [chars] token mismatch
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
SSHD Messages
Error Message%SECURITY-SSHD-3-ERR_DETAILS [chars] [chars] [chars]
Explanation Error description, client address, error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_ERRNO [chars] [chars]
Explanation Error description, error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_GENERAL [chars]
Explanation SSH encounterd some error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_MALLOC Cannot allocate memory in function [chars]()
Explanation Internal error. System is out of memory - malloc failed.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_BIND Cannot bind to sysdb in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_DATALIST Cannot get datalist in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_DELETE sysdb_item_delete failed for tuple [chars] in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_PACK Cannot pack tuple in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-3-ERR_SYSDB_SET sysdb_item_set failed for tuple [chars] in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message%SECURITY-SSHD-6-INFO_GENERAL [chars]
Explanation The sshd encountered some problem in genric nature or plain information.
Recommended Action 'No action is required.'
TACACSD Messages
Error Message%SECURITY-TACACSD-3-BAG_ENCODE_ERR Failed to encode bag information for '[chars]' - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-BAGS_UNREG_ERR Failed to unregister bags - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-DEBUG_ERROR [chars]: [chars]
Explanation Error encountered in debug module.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-EDM_INIT_ERR Failed to register EDM - [chars]
Explanation Failed to start the EDM.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_ATTACH_SOCK Unable to attach an event handler for socket [dec] - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CONFIG_GLOBAL Error while setting or unsetting TACACS+ [chars] configuration - [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CONFIG_SERVER Error while setting or unsetting [chars] in a server entry - [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CREATE_SERVER_ENTRY Cannot create a TACACS+ server entry - [chars]
Explanation Error occured while creating TACACS+ server entry.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CREATE_SGSERVER Unable to add the server '[chars]' to group '[chars]' - [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_CREATESG Unable to create the server group '[chars]' - [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_DELETE_SGSERVER Unable to delete the server '[chars]' from group '[chars]' - [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_DELETESG Unable to delete the server group '[chars]' - [chars]
Explanation A configuration error has occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-ERR_SYSDBBIND Failed to bind to SysDB for path [chars] after [dec] retries
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-MEMORY Failed to allocate [unsigned int] bytes while [chars]
Explanation tacacsd has failed to allocate the required amount of memory
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-MSG_ERROR [chars]: [chars]
Explanation Error encountered while handling messages received by tacacsd.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-MSG_SIZE_ERR [chars]: size [dec] - [chars]
Explanation A message with illegal size was received or to be sent.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-PARAMETER [chars]
Explanation An invalid argument was passed to either the tacacsd or one of its funtions.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-PROBE_THREAD_CREATE_FAILED Unable to create thread to probe status of TACACS+ server [chars]/[dec]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-SETPRIO_FAILED Failed to change server priority - [chars]
Explanation Attempt to change priority failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-SHUTDOWN_ERROR [chars]: [chars]
Explanation TACACS+ process failed to shutdown properly.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-3-STARTUP_ERROR [chars]: [chars]
Explanation TACACS+ process failed to startup properly.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-CERR_REGISTER [chars]: [chars]
Explanation tacacsd failed to register error codes.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-IFHANDLE_NULL WARNING: Cannot obtain handle for the interface [chars]: [chars]
Explanation Error encountered while obtaining handle for the interface specified as the source interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-NO_IP_ADDRESS WARNING: No IP address has been configured for [chars]
Explanation There is no IP address configured for the specified interface.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-NOSUCH_INTF WARNING: Specified source interface [chars] is not present: [chars]
Explanation The interface specified as source interface is not present.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-SRCINTF_NOTUP WARNING: Specified source interface [chars] is not UP
Explanation The interface specified as source interface is not UP.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-4-TACACS_NOSERV Warning: Server [chars] is not configured
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-NO_CMD No valid command provided for [chars]
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-NULL_REQ Encountered a NULL request pointer while [chars]
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-SERVER_DOWN TACACS+ server [chars]/[dec] is DOWN - [chars]
Explanation TACACS+ server is unreachable or down.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-6-TIMEOUT_IGNORED A time out event has been ignored for context key [chars] (session [hex])
Explanation An internal software error occured.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message%SECURITY-TACACSD-7-GENERIC_ERROR [chars]: [chars]
Explanation Error message for internal debugging purposes.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
