Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.4 - License Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

License Messages

LICCMD Messages

LICLIB Messages

LICMGR Messages

License Messages

This section contains all License related System Error Messages. The following facility codes are represented in this module:

•LICCMD Messages

•LICLIB Messages

•LICMGR Messages

LICCMD Messages
Error Message     
%LICENSE-LICCMD-4-LACK_OF_ARG Licensing command argments lack ([chars]) [[dec]]
Explanation The parameters that liccmd recive args from parser is lack.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICCMD-4-TRACE_INIT_FAILED Licensing command library could not initialize tracing ([chars]) [[dec]]
Explanation The license command library could not initialize internal tracing used for technical support.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LICLIB Messages
Error Message     
%LICENSE-LICLIB-3-DB_DIR_ERROR Error creating license management directory: [chars]
Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICLIB-4-TRACE_INIT_FAILED Licensing client library could not initialize tracing ([chars]) [[dec]]
Explanation The license client library could not initialize internal tracing used for technical support.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICLIB-6-DB_DIR_CREATE License management directory created
Explanation The license manager created a directory to store license information. Normally this will occur after the disk holding the license information has been formatted or replaced, or on first boot of a new system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

LICMGR Messages
Error Message     
%LICENSE-LICMGR-3-CHASSIS_CHECK License database and this chassis[chars] match
Explanation The message displays the result of comparing the license database to the current state of the chassis. If the chassis and license database do not match, additional license operations (add or remove) will not be possible. The current licenses will remain usable for 90 days after this alarm is raised if it is not cleared. This alarm may occur if the route processor card has been moved from one chassis to another.
Recommended Action If no licenses are needed the admin mode 'clear license' command can be used to reset the license database. If a backup of the license database is available it can be restored with the 'license restore' command.
Error Message     
%LICENSE-LICMGR-3-DB_DIR_ERROR Error creating license management directory: [chars]
Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-DB_SAVE_ERROR Error saving license database: [chars]
Explanation The license manager encountered an error condition while saving the license database. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-EVENT_FAIL License manager event processing error: [chars]
Explanation The license manager encountered an error condition while processing an event. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-EXIT_ERROR License manager encounted a fatal error condition and is exiting: [chars] ([hex])
Explanation The license manager encountered a fatal error condition, and cannot proceed. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-INIT License manager could not initialize: Error [chars] while [chars]
Explanation The license manager encountered a fatal error condition while initializing. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-SYSDB Unable to access the system database, error: [chars]
Explanation An error occurred when accessing the system database
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-3-SYSDBREG Registration with SysDB failed [[chars]], error: [chars]
Explanation An error occurred when registering with the system database
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-LICENSE_EXPIRED Evaluation license for feature [chars] has expired
Explanation The specified feature's evaluation license has expired. The feature will no longer be usable. The message appears even if the feature is not currently configured.
Recommended Action In order to continue using the feature, obtain a license and install it using the 'license add' command in admin mode.
Error Message     
%LICENSE-LICMGR-4-LICENSE_FILE_PROBLEM Problem adding licenses from license file [chars]: [chars]
Explanation The license manager encountered an error attempting to install the licenses in the given license file to the system. Check the error string to determine what has happened.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-LICENSE_POOL_REMOVED Removed license pool for nonexistant SDR [chars]
Explanation The license database contained a license pool definition for an SDR that does not exist. The licenses assigned to this pool were automatically moved back into the Owner pool.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-4-LICENSE_WILL_EXPIRE Evaluation license for feature [chars] will expire in [chars]
Explanation The specified feature's evaluation license will expire in the time indicated. After the license has expired the feature will become unusable. This message appears even if the feature is not currently configured.
Recommended Action In order to continue using the feature, obtain a license and install it using the 'license add' command in admin mode. If the license is not needed, the messages can be stopped by removing all licenses for that feature using the 'license remove' command in admin mode.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_FEATURE [unsigned int] features cleared
Explanation As a result of 'clear license' command execution, license features installed on this system were cleared.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_NO_FEATURE There are no features to be cleared
Explanation The 'clear license' command was executed, but there are no feature licenses installed to be cleared on this system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_NO_POOL There are no license pools to be cleared
Explanation The 'clear license' command was executed, but there are no pools to be cleared on this system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LICENSE_CLEAR_POOL [unsigned int] license pools cleared (Owner pool still exists).
Explanation As a result of 'clear license' command execution, license pools other than the Owner pool were cleared.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LOAD_LICENSE_FILE Loading license file [chars]
Explanation The license manager is about to open the named license file to add licenses to the system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-6-LOAD_LICENSE_FILE_OK All licenses from license file [chars] added successfully
Explanation The license manager has installed all the licenses in the named license file to the system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-7-CLIENT_DISCONNECT A license client was disconnected
Explanation Due to a loss of inter-process communications the license manager disconnected a client library instance.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%LICENSE-LICMGR-7-LICENSE_RECLAIMED A license was reclaimed by the license manager
Explanation Due to a loss of inter-process communications the license manager had to reclaim a license that was not properly released.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

	Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.4
	License Messages
Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.4 Preface Overview Access Control List (ACL) Messages Default Messages Diagnostic Messages Fabric Messages Forwarding Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages License Messages Media Messages Manageablity (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QoS) Messages Routing Messages Security Messages Service Messages Simple Network Management Protocol (SNMP) Messages System Database Messages Index	Download this chapter License Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for Platform Independent Messages (PDF - 10 MB) Feedback Table Of Contents License Messages LICCMD Messages LICLIB Messages LICMGR Messages License Messages This section contains all License related System Error Messages. The following facility codes are represented in this module: •LICCMD Messages •LICLIB Messages •LICMGR Messages LICCMD Messages Error Message %LICENSE-LICCMD-4-LACK_OF_ARG Licensing command argments lack ([chars]) [[dec]] Explanation The parameters that liccmd recive args from parser is lack. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICCMD-4-TRACE_INIT_FAILED Licensing command library could not initialize tracing ([chars]) [[dec]] Explanation The license command library could not initialize internal tracing used for technical support. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. LICLIB Messages Error Message %LICENSE-LICLIB-3-DB_DIR_ERROR Error creating license management directory: [chars] Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICLIB-4-TRACE_INIT_FAILED Licensing client library could not initialize tracing ([chars]) [[dec]] Explanation The license client library could not initialize internal tracing used for technical support. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICLIB-6-DB_DIR_CREATE License management directory created Explanation The license manager created a directory to store license information. Normally this will occur after the disk holding the license information has been formatted or replaced, or on first boot of a new system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. LICMGR Messages Error Message %LICENSE-LICMGR-3-CHASSIS_CHECK License database and this chassis[chars] match Explanation The message displays the result of comparing the license database to the current state of the chassis. If the chassis and license database do not match, additional license operations (add or remove) will not be possible. The current licenses will remain usable for 90 days after this alarm is raised if it is not cleared. This alarm may occur if the route processor card has been moved from one chassis to another. Recommended Action If no licenses are needed the admin mode 'clear license' command can be used to reset the license database. If a backup of the license database is available it can be restored with the 'license restore' command. Error Message %LICENSE-LICMGR-3-DB_DIR_ERROR Error creating license management directory: [chars] Explanation The license manager encountered an error condition while attempting to create a directory for storing license information. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-DB_SAVE_ERROR Error saving license database: [chars] Explanation The license manager encountered an error condition while saving the license database. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-EVENT_FAIL License manager event processing error: [chars] Explanation The license manager encountered an error condition while processing an event. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-EXIT_ERROR License manager encounted a fatal error condition and is exiting: [chars] ([hex]) Explanation The license manager encountered a fatal error condition, and cannot proceed. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-INIT License manager could not initialize: Error [chars] while [chars] Explanation The license manager encountered a fatal error condition while initializing. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-SYSDB Unable to access the system database, error: [chars] Explanation An error occurred when accessing the system database Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-3-SYSDBREG Registration with SysDB failed [[chars]], error: [chars] Explanation An error occurred when registering with the system database Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-LICENSE_EXPIRED Evaluation license for feature [chars] has expired Explanation The specified feature's evaluation license has expired. The feature will no longer be usable. The message appears even if the feature is not currently configured. Recommended Action In order to continue using the feature, obtain a license and install it using the 'license add' command in admin mode. Error Message %LICENSE-LICMGR-4-LICENSE_FILE_PROBLEM Problem adding licenses from license file [chars]: [chars] Explanation The license manager encountered an error attempting to install the licenses in the given license file to the system. Check the error string to determine what has happened. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-LICENSE_POOL_REMOVED Removed license pool for nonexistant SDR [chars] Explanation The license database contained a license pool definition for an SDR that does not exist. The licenses assigned to this pool were automatically moved back into the Owner pool. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-4-LICENSE_WILL_EXPIRE Evaluation license for feature [chars] will expire in [chars] Explanation The specified feature's evaluation license will expire in the time indicated. After the license has expired the feature will become unusable. This message appears even if the feature is not currently configured. Recommended Action In order to continue using the feature, obtain a license and install it using the 'license add' command in admin mode. If the license is not needed, the messages can be stopped by removing all licenses for that feature using the 'license remove' command in admin mode. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_FEATURE [unsigned int] features cleared Explanation As a result of 'clear license' command execution, license features installed on this system were cleared. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_NO_FEATURE There are no features to be cleared Explanation The 'clear license' command was executed, but there are no feature licenses installed to be cleared on this system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_NO_POOL There are no license pools to be cleared Explanation The 'clear license' command was executed, but there are no pools to be cleared on this system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LICENSE_CLEAR_POOL [unsigned int] license pools cleared (Owner pool still exists). Explanation As a result of 'clear license' command execution, license pools other than the Owner pool were cleared. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LOAD_LICENSE_FILE Loading license file [chars] Explanation The license manager is about to open the named license file to add licenses to the system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-6-LOAD_LICENSE_FILE_OK All licenses from license file [chars] added successfully Explanation The license manager has installed all the licenses in the named license file to the system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-7-CLIENT_DISCONNECT A license client was disconnected Explanation Due to a loss of inter-process communications the license manager disconnected a client library instance. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %LICENSE-LICMGR-7-LICENSE_RECLAIMED A license was reclaimed by the license manager Explanation Due to a loss of inter-process communications the license manager had to reclaim a license that was not properly released. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks