Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 - System Database Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

System Database Messages

SMC Messages

SMS Messages

SYSDB Messages

System Database Messages

This section contains all system database related System Error Messages. The following facility codes are represented in this module:

•SMC Messages

•SMS Messages

•SYSDB Messages

SMC Messages
Error Message     
%SYSDB-SMC-7-DEPRECATED_PATH SysDB path '[chars]' is deprecated
Explanation An operation has been attempted on a part of the SysDB namespace that should no longer be used.
Recommended Action *RECUR*
Error Message     
%SYSDB-SMC-7-INTERNAL [chars]: rc [hex] ([chars])
Explanation The server has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMC-7-INTERNAL_STATE [chars]
Explanation The server has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMC-7-INVALID_PATH SysDB path '[chars]' is invalid
Explanation An operation has been attempted on a part of the SysDB namespace that should not be used.
Recommended Action *RECUR*
Error Message     
%SYSDB-SMC-7-MISSING_NODE_NFN Missing node down notification from node [chars]
Explanation No node down notification was received from the underlying infrastructure for a recent node reload.
Recommended Action *SUPPORT*
Error Message     
%SYSDB-SMC-7-MULTI_NODE_TRANS Multi-node access from transaction will be non-atomic (transaction node [dec]:[dec], accessing node [dec]:[dec], by [chars])
Explanation An application tried to use a transaction to access multiple nodes; this is not supported currently.
Recommended Action *SUPPORT*
Error Message     
%SYSDB-SMC-7-PARSE_FAILED [chars] ('[chars]' from '[chars]')
Explanation A pathname was used for a SysDB operation from which the destination node could not be parsed.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMC-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]
Explanation There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS.
Recommended Action Upgrade all nodes to have the same version of SysDB installed.
Error Message     
%SYSDB-SMC-7-TIMEOUT Message #[unsigned int], destined for [chars], timed out having received [unsigned int] of [unsigned int] expected responses: returning [chars] to client [chars]. Check for deadlocked SysDB processes or transport issues within the system
Explanation A request timed out before SysDB MC received the expected number of replies
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMC-7-TRANS Attempted multi-node access from transaction was prevented (attempted to access multi-cast group [dec])
Explanation A client attempted to use an unsupported distributed transaction.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMC-7-UNEXPECTED_MSG_TYPE An unexpected message type was received: [hex]
Explanation We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.
Recommended Action *SUPPORT*
Error Message     
%SYSDB-SMC-7-UNEXPECTED_MULTIPLE_RESPONSES Received unexpected multiple responses for message of type [hex]
Explanation The SysDB Medusa process received multiple responses for a message type for which only a single response was expected.
Recommended Action *SUPPORT*
Error Message     
%SYSDB-SMC-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]
Explanation The server has come across an unexpected value for the specified parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMC-7-WRONG_PLANE An attempt was made to access SysDB path '[chars]'. This resolves to the [chars] plane and cannot be accessed on this card type.
Explanation An application has tried to access a plane of SysDB data that does not exist on this node.
Recommended Action *RECUR*

SMS Messages
Error Message     
%SYSDB-SMS-7-INTERNAL [chars]: rc [hex] ([chars])
Explanation The SysDB server has either failed a function that expected to succeed, or has got into an inconsistent state.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMS-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars])
Explanation The SysDB server has either failed to acquire or release a lock.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMS-7-MISSING_NODE_NFN Missing node down notification from node [chars]
Explanation No node down notification was received from the underlying infrastructure for a recent node reload.
Recommended Action *SUPPORT*
Error Message     
%SYSDB-SMS-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec]
Explanation There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB server.
Recommended Action Upgrade all nodes to have the same version of SysDB installed.
Error Message     
%SYSDB-SMS-7-RESTARTING This process is restarting, as an essential piece of infrastructure ([chars]) is failing. [chars] ([chars]).
Explanation The SysDB server is unable to function due to a problem with a piece of infrastructure. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMS-7-SEND_RESPONSE Sending [chars] via group_sendv_memberset failed [msg_size [unsigned int]]: [hex] ([chars])
Explanation The SysDB server failed to send a message to the SysDB Medusa Client
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SMS-7-UNEXPECTED_MSG_TYPE An unexpected message type was received: [hex]
Explanation We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system.
Recommended Action *SUPPORT*
Error Message     
%SYSDB-SMS-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex]
Explanation The SysDB server came across an unexpected value for the specified parameter.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SYSDB Messages
Error Message     
%SYSDB-SYSDB-3-SC_BIND [Sysdbcon] Could not bind to SysDB: [chars]
Explanation Sysdbcon was unable to bind to the root of SysDB. It is possible that there is a problem with SysDB.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_DATATYPERET [Sysdbcon] SysDB returned unrecognised datatype ([unsigned int])
Explanation The datatype returned by SysDB does not match any of those expected by Sysdbcon. This is probably because the type is missing in Sysdbcon.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_EXTFMTSTR [Sysdbcon] Unable to extract format string from packed tuple
Explanation The packed tuple returned from SysDB is in some way corrupt. The format string it contains could not be read.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_FILEREAD [Sysdbcon] Unable to read from command file
Explanation An error occurred during a read operation from the instruction file.
Recommended Action Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_INTERR [Sysdbcon] An internal error has occurred
Explanation The code has performed an action which should not be possible.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_NOFILE [Sysdbcon] The specified command file ([chars]) could not be opened
Explanation The instruction file specified when Sysdbcon was started cannot be found. The most probable reason is that an incorrect name was supplied.
Recommended Action Check that the file name supplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_PKDREAD [Sysdbcon] Unable to read in data for packed tuple
Explanation An error occurred while preparing to read instructions from the command line.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_PKDTUPLECRE [Sysdbcon] Unable to create packed tuple
Explanation An error occurred creating a packed tuple.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_PKDTUPLEFILE [Sysdbcon] No data for packed tuple in file
Explanation An error occurred during a read operation from the instruction file.
Recommended Action Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_READERINIT [Sysdbcon] Unable to initialize the command line reader
Explanation An error occurred while preparing to read instructions from the command line.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-3-SC_UNPACKTUP [Sysdbcon] Unable to unpack packed tuple
Explanation The packed tuple returned from SysDB is in some way corrupt. The data it contains could not be read.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_ABORTBULK [Sysdbcon] While aborting a bulk operation the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_ABORTTRANS [Sysdbcon] While aborting a transaction the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_BAD_INTEGER [Sysdbcon] Warning: bad integer format or integer value is out of range.
Explanation The user entered integer in unrecognized format or out of range of current integer data type.
Recommended Action Correct input value and run command again.
Error Message     
%SYSDB-SYSDB-4-SC_BADFORMAT [Sysdbcon] Badly formatted command
Explanation An unescaped ''' character was found part way through a token in a command string.
Recommended Action Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_BIND_NOTFOUND [Sysdbcon] Warning: now bound to a non-existent node.
Explanation The user bound to a node which does not exist. This is a warning only - this action is perfectly legal.
Recommended Action Check that this is the directory you intended to bind to.
Error Message     
%SYSDB-SYSDB-4-SC_BULK_NUM_OPS [Sysdbcon] While getting the number of operations in the bulk the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_CFGMGR_ADD_DELETES [Sysdbcon] While adding deletes to the bulk buffer the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_CFGMGR_ADDDIFFS [Sysdbcon] While adding diffs to the bulk the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_CFGMGR_DELETE [Sysdbcon] While performing a bulk regular expression delete the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_CFGMGR_MERGE [Sysdbcon] While merging files the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_COMMITTRANS [Sysdbcon] While committing a transaction the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_COPY [Sysdbcon] While copying item [chars] to [chars] the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. This could be because the item to copy does not exist. The details are in the error string.
Recommended Action Check that the item to copy exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_CREATE [Sysdbcon] While creating item [chars] the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. This could be because the item to create already exists. The details are in the error string.
Recommended Action Check that the item to create does not exist. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_DATAFIND [Sysdbcon] While executing the find data request the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_DATALIST [Sysdbcon] While executing the datalist request the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_DATATYPE [Sysdbcon] Unrecognised datatype ([chars])
Explanation A datatype other than one of those supported was supplied.
Recommended Action Use help for a list of supported datatypes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_DELETE [Sysdbcon] While deleting item [chars] the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. This could be because the item does not exist. The details are in the error string.
Recommended Action Check that the item to delete exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_EDM_NOT [Sysdbcon] While generating EDM notifications the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_ENDBULK [Sysdbcon] While ending a bulk operation the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_ERRORSLIST [Sysdbcon] While executing the errors list request the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_EVENT [Sysdbcon] Unrecognised notification event ([chars])
Explanation A notification event other than one of those supported was supplied.
Recommended Action Use help for a list of supported events. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_EVENTFIND [Sysdbcon] While executing the event find request the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_EXCESS [Sysdbcon] Excess tokens in command string
Explanation There were more tokens entered as part of the command string than are required for the command.
Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_FILERESTORE [Sysdbcon] While restoring items from a file the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_FILESAVE [Sysdbcon] While saving items to a file the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_FIND [Sysdbcon] While executing the find request the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_GET [Sysdbcon] While fetching item [chars] the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. This could be because the item to fetch does not exist. The details are in the error string.
Recommended Action Check that the requested item exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_GET_ITEMS [Sysdbcon] While fetching items from path [chars] the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. This could be because the items to fetch do not exist. The details are in the error string.
Recommended Action Check that the requested items exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_ITERATE [Sysdbcon] While executing the iterate request the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%SYSDB-SYSDB-4-SC_LIST [Sysdbcon] While executing the list request the following error occurred:
[chars]
Explanation An error occurred invoking a SysDB function. The details are in the error string.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

	Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
	System Database Messages
Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 Preface Overview Diagnostic Messages Fabric Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Replicator Messages Routing Messages Security Messages Simple Network Management Protocol (SNMP) Messages System Database Messages Index	Download this chapter System Database Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents System Database Messages SMC Messages SMS Messages SYSDB Messages System Database Messages This section contains all system database related System Error Messages. The following facility codes are represented in this module: •SMC Messages •SMS Messages •SYSDB Messages SMC Messages Error Message %SYSDB-SMC-7-DEPRECATED_PATH SysDB path '[chars]' is deprecated Explanation An operation has been attempted on a part of the SysDB namespace that should no longer be used. Recommended Action RECUR Error Message %SYSDB-SMC-7-INTERNAL [chars]: rc [hex] ([chars]) Explanation The server has either failed a function that expected to succeed, or has got into an inconsistent state. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMC-7-INTERNAL_STATE [chars] Explanation The server has got into an inconsistent state. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMC-7-INVALID_PATH SysDB path '[chars]' is invalid Explanation An operation has been attempted on a part of the SysDB namespace that should not be used. Recommended Action RECUR Error Message %SYSDB-SMC-7-MISSING_NODE_NFN Missing node down notification from node [chars] Explanation No node down notification was received from the underlying infrastructure for a recent node reload. Recommended Action SUPPORT Error Message %SYSDB-SMC-7-MULTI_NODE_TRANS Multi-node access from transaction will be non-atomic (transaction node [dec]:[dec], accessing node [dec]:[dec], by [chars]) Explanation An application tried to use a transaction to access multiple nodes; this is not supported currently. Recommended Action SUPPORT Error Message %SYSDB-SMC-7-PARSE_FAILED [chars] ('[chars]' from '[chars]') Explanation A pathname was used for a SysDB operation from which the destination node could not be parsed. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMC-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec] Explanation There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB MS. Recommended Action Upgrade all nodes to have the same version of SysDB installed. Error Message %SYSDB-SMC-7-TIMEOUT Message #[unsigned int], destined for [chars], timed out having received [unsigned int] of [unsigned int] expected responses: returning [chars] to client [chars]. Check for deadlocked SysDB processes or transport issues within the system Explanation A request timed out before SysDB MC received the expected number of replies Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMC-7-TRANS Attempted multi-node access from transaction was prevented (attempted to access multi-cast group [dec]) Explanation A client attempted to use an unsupported distributed transaction. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMC-7-UNEXPECTED_MSG_TYPE An unexpected message type was received: [hex] Explanation We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system. Recommended Action SUPPORT Error Message %SYSDB-SMC-7-UNEXPECTED_MULTIPLE_RESPONSES Received unexpected multiple responses for message of type [hex] Explanation The SysDB Medusa process received multiple responses for a message type for which only a single response was expected. Recommended Action SUPPORT Error Message %SYSDB-SMC-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex] Explanation The server has come across an unexpected value for the specified parameter. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMC-7-WRONG_PLANE An attempt was made to access SysDB path '[chars]'. This resolves to the [chars] plane and cannot be accessed on this card type. Explanation An application has tried to access a plane of SysDB data that does not exist on this node. Recommended Action RECUR SMS Messages Error Message %SYSDB-SMS-7-INTERNAL [chars]: rc [hex] ([chars]) Explanation The SysDB server has either failed a function that expected to succeed, or has got into an inconsistent state. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMS-7-LOCKING Failed to [chars] [chars]. Error [dec] ([chars]) Explanation The SysDB server has either failed to acquire or release a lock. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMS-7-MISSING_NODE_NFN Missing node down notification from node [chars] Explanation No node down notification was received from the underlying infrastructure for a recent node reload. Recommended Action SUPPORT Error Message %SYSDB-SMS-7-PROTOCOL A incompatible version of a message was received from process id [dec], node [dec] Explanation There was a mismatch between the messaging protocol version used by the SysDB MC and the SysDB server. Recommended Action Upgrade all nodes to have the same version of SysDB installed. Error Message %SYSDB-SMS-7-RESTARTING This process is restarting, as an essential piece of infrastructure ([chars]) is failing. [chars] ([chars]). Explanation The SysDB server is unable to function due to a problem with a piece of infrastructure. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMS-7-SEND_RESPONSE Sending [chars] via group_sendv_memberset failed [msg_size [unsigned int]]: [hex] ([chars]) Explanation The SysDB server failed to send a message to the SysDB Medusa Client Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SMS-7-UNEXPECTED_MSG_TYPE An unexpected message type was received: [hex] Explanation We are receiving messages of a type that we did not expect. This should not cause failures of any kind, but probably does indicate an error in another part of the system. Recommended Action SUPPORT Error Message %SYSDB-SMS-7-UNEXPECTED_VALUE Encountered unexpected [chars]: [hex] Explanation The SysDB server came across an unexpected value for the specified parameter. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. SYSDB Messages Error Message %SYSDB-SYSDB-3-SC_BIND [Sysdbcon] Could not bind to SysDB: [chars] Explanation Sysdbcon was unable to bind to the root of SysDB. It is possible that there is a problem with SysDB. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_DATATYPERET [Sysdbcon] SysDB returned unrecognised datatype ([unsigned int]) Explanation The datatype returned by SysDB does not match any of those expected by Sysdbcon. This is probably because the type is missing in Sysdbcon. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_EXTFMTSTR [Sysdbcon] Unable to extract format string from packed tuple Explanation The packed tuple returned from SysDB is in some way corrupt. The format string it contains could not be read. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_FILEREAD [Sysdbcon] Unable to read from command file Explanation An error occurred during a read operation from the instruction file. Recommended Action Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_INTERR [Sysdbcon] An internal error has occurred Explanation The code has performed an action which should not be possible. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_NOFILE [Sysdbcon] The specified command file ([chars]) could not be opened Explanation The instruction file specified when Sysdbcon was started cannot be found. The most probable reason is that an incorrect name was supplied. Recommended Action Check that the file name supplied was correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_PKDREAD [Sysdbcon] Unable to read in data for packed tuple Explanation An error occurred while preparing to read instructions from the command line. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_PKDTUPLECRE [Sysdbcon] Unable to create packed tuple Explanation An error occurred creating a packed tuple. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_PKDTUPLEFILE [Sysdbcon] No data for packed tuple in file Explanation An error occurred during a read operation from the instruction file. Recommended Action Check that the file format is correct. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_READERINIT [Sysdbcon] Unable to initialize the command line reader Explanation An error occurred while preparing to read instructions from the command line. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-3-SC_UNPACKTUP [Sysdbcon] Unable to unpack packed tuple Explanation The packed tuple returned from SysDB is in some way corrupt. The data it contains could not be read. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_ABORTBULK [Sysdbcon] While aborting a bulk operation the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_ABORTTRANS [Sysdbcon] While aborting a transaction the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_BAD_INTEGER [Sysdbcon] Warning: bad integer format or integer value is out of range. Explanation The user entered integer in unrecognized format or out of range of current integer data type. Recommended Action Correct input value and run command again. Error Message %SYSDB-SYSDB-4-SC_BADFORMAT [Sysdbcon] Badly formatted command Explanation An unescaped ''' character was found part way through a token in a command string. Recommended Action Re-enter the command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_BIND_NOTFOUND [Sysdbcon] Warning: now bound to a non-existent node. Explanation The user bound to a node which does not exist. This is a warning only - this action is perfectly legal. Recommended Action Check that this is the directory you intended to bind to. Error Message %SYSDB-SYSDB-4-SC_BULK_NUM_OPS [Sysdbcon] While getting the number of operations in the bulk the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. This could be because the operation does not exist. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_CFGMGR_ADD_DELETES [Sysdbcon] While adding deletes to the bulk buffer the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_CFGMGR_ADDDIFFS [Sysdbcon] While adding diffs to the bulk the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_CFGMGR_DELETE [Sysdbcon] While performing a bulk regular expression delete the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_CFGMGR_MERGE [Sysdbcon] While merging files the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_COMMITTRANS [Sysdbcon] While committing a transaction the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_COPY [Sysdbcon] While copying item [chars] to [chars] the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. This could be because the item to copy does not exist. The details are in the error string. Recommended Action Check that the item to copy exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_CREATE [Sysdbcon] While creating item [chars] the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. This could be because the item to create already exists. The details are in the error string. Recommended Action Check that the item to create does not exist. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_DATAFIND [Sysdbcon] While executing the find data request the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_DATALIST [Sysdbcon] While executing the datalist request the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_DATATYPE [Sysdbcon] Unrecognised datatype ([chars]) Explanation A datatype other than one of those supported was supplied. Recommended Action Use help for a list of supported datatypes. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_DELETE [Sysdbcon] While deleting item [chars] the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. This could be because the item does not exist. The details are in the error string. Recommended Action Check that the item to delete exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_EDM_NOT [Sysdbcon] While generating EDM notifications the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_ENDBULK [Sysdbcon] While ending a bulk operation the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_ERRORSLIST [Sysdbcon] While executing the errors list request the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_EVENT [Sysdbcon] Unrecognised notification event ([chars]) Explanation A notification event other than one of those supported was supplied. Recommended Action Use help for a list of supported events. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_EVENTFIND [Sysdbcon] While executing the event find request the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_EXCESS [Sysdbcon] Excess tokens in command string Explanation There were more tokens entered as part of the command string than are required for the command. Recommended Action Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_FILERESTORE [Sysdbcon] While restoring items from a file the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_FILESAVE [Sysdbcon] While saving items to a file the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_FIND [Sysdbcon] While executing the find request the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_GET [Sysdbcon] While fetching item [chars] the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. This could be because the item to fetch does not exist. The details are in the error string. Recommended Action Check that the requested item exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_GET_ITEMS [Sysdbcon] While fetching items from path [chars] the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. This could be because the items to fetch do not exist. The details are in the error string. Recommended Action Check that the requested items exists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_ITERATE [Sysdbcon] While executing the iterate request the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %SYSDB-SYSDB-4-SC_LIST [Sysdbcon] While executing the list request the following error occurred: [chars] Explanation An error occurred invoking a SysDB function. The details are in the error string. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks