Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 - Operating System (OS) Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Operating System (OS) Messages

RDS Messages

RDSFS Messages

REGEXP Messages

RSI_AGENT Messages

RSI_MASTER Messages

RSVDPMEM Messages

RT_CHECK_LIB Messages

RT_CHECK Messages

SHMWIN_SVR Messages

SHMWIN Messages

SPAIPC_NETIO Messages

Operating System (OS) Messages

This section contains all Operating System(OS) and OS infrastructure related System Error Messages. The following facility codes are represented in this module:

•RDS Messages

•RDSFS Messages

•REGEXP Messages

•RSI_AGENT Messages

•RSI_MASTER Messages

•RSVDPMEM Messages

•RT_CHECK_LIB Messages

•RT_CHECK Messages

•SHMWIN_SVR Messages

•SHMWIN Messages

•SPAIPC_NETIO Messages

RDS Messages
Error Message     
%OS-RDS-3-LOCK_FAILURE [chars] failed, errno=[dec]
Explanation Lock/Unlock operation failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-NRS_CREATE_CLASS [chars]: nrs_create_class for [chars] failed, errno=[dec]
Explanation nrs_create_class failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-NRS_REGISTER_BULK [chars]: nrs_register_bulk for CH=[hex] failed, rc=[dec] errno=[dec]
Explanation nrs_register_bulk failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-PENDING_MSG [chars]: couldnt create pending msg for CH=[hex], DH=[hex], errno=[dec]
Explanation couldnt create pending msg for the incoming write/publish.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-SNAP_DUMP [chars]: handle=[hex] memory ptr=0x[pointer]
Explanation rds hit an internal error.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-SYNC_CREATE TID=[dec]: gs_sync_create failed for tag [hex], err [dec]
Explanation Ticket create failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-SYNC_RELEASE_FAILED TID=[dec]: Ticket Release failed rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec]
Explanation Ticket request timed out.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-SYNC_REQUEST TID=[dec]: Ticket Request failed for ticket [hex], rp [pointer], err [dec]
Explanation Ticket request failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-SYNC_REQUEST_TIMED_OUT TID=[dec]: Tick Req Timed out rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec], RETRYING...
Explanation Ticket request timed out.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-SYNC_REQUEST_UNEXPECTED TID=[dec]: Tick Req unknown failure, rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec]
Explanation Ticket request failed with unknown error.
Recommended Action Contact support.
Error Message     
%OS-RDS-3-WRITE_TIMEDOUT rds_write DHDL=[hex]([chars]), req=[dec], resp=[dec], #wtrs=[dec]: [chars], errno=[dec], retries=[dec]
Explanation rds_write request timed out.
Recommended Action Contact support.
Error Message     
%OS-RDS-4-COND_TIMED_WAIT TID=[dec]: Unexpected error=[dec] from pthread_cond_timedwait cmd=[dec]
Explanation pthread_cond_timedwait failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-4-RING_LOOKUP Lookup of identifier=[hex] index=[hex] in RING=[pointer] failed
Explanation atomic tag ring lookup failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-BAD_RDSTYPE TID=[dec]: [dec]: Wrong replica type passed, expected=[dec]..
Explanation passed in replica_id is wrong.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-DUPLICATE_TICKET_NOTIF TID=[dec]: [dec]: Duplicate Tick Notif (Dropping it) rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] TickCurr=[dec] TickHi=[dec] state=[hex]
Explanation Got a ticket notification, for an already active ticket.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-GENERIC_FAILURE_MSG [chars][dec]
Explanation This is a generic error msg.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-GET_DH_ENTRY [dec]: No entry for Datahandle=[hex], rp=[pointer] vec=[pointer] errno=[dec]

Explanation Could find datahandle entry in the vector for replica
Recommended Action Contact support.
Error Message     
%OS-RDS-7-GET_REPLICA [dec]: [chars] for CH=[hex], errno=[dec], rds_type=[dec]
Explanation Couldnt get the replica entry
Recommended Action Contact support.
Error Message     
%OS-RDS-7-GROUP_SEND_RINFO [chars]: group_send_rinfo failed GID=[hex], errno=[dec], rc=[dec], #resp=[dec], pattern=[chars]

Explanation group_send_rinfo failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-GSM_FAIL GSM for [chars] Failed for Handle=[hex], to (g:[hex]/n:[hex]/p:[dec]), errno=[dec]
Explanation group_send_memberset failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-INVALID_ARGS [dec]: invalid args passed
Explanation a function was invoked with invalid arguments
Recommended Action Contact support.
Error Message     
%OS-RDS-7-INVALID_RHDR [dec]: invalid rhdr=[pointer] passed
Explanation a function was invoked with invalid rhdr msg
Recommended Action Contact support.
Error Message     
%OS-RDS-7-NO_PREQ_ENTRY [chars].[dec]: [chars] rp=[pointer] nptr=[pointer] from sender=g:[dec]/n:[dec]/p:[dec]
Explanation Couldnt find pending request entry in the pending list.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-NRS_DECODE [chars], Datahandle=[hex], errno=[dec]
Explanation An internal NRS function failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-NRS_SEARCH [chars]: nrs_search for [chars] failed, rc=[dec] errno=[dec]
Explanation nrs_search failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-QUERY_PEERS_TIMED_OUT TID=[dec] Couldnt cmd=[dec] for GID=[hex] CHDL=[hex]([hex]) #to_resp=[dec] req=[dec] got=[dec] state=[hex], expstate=[hex] preq_id=[dec] rds_type=[dec]
Explanation Ticket request timed out.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-READ_FAILED [chars] DH_ENTRY=[hex] for exp_len=[dec] got=[dec] rc=[dec] errno=[dec]
Explanation ens_read API failed.
Recommended Action Contact support.
Error Message     
%OS-RDS-7-WRONG_PLANE [dec]: Wrong plane [dec] for [chars] failed..
Explanation ens_bulk_register failed.
Recommended Action Contact support.

RDSFS Messages
Error Message     
%OS-RDSFS-4-BAD_REPLICA Bad Replica detected: Condition-[chars] Path-[chars] Error-[chars].
Explanation The current instance of RDSFS encountered an error so that it is no longer a replica.
Recommended Action Contact customer support.
Error Message     
%OS-RDSFS-7-DEBUG PID:TID=[dec]:[dec] [chars] [chars] Error-[chars]
Explanation RDSFS failure.
Recommended Action Contact customer support.
Error Message     
%OS-RDSFS-7-FAILURE [chars] [chars] Error-[chars]
Explanation RDSFS failure.
Recommended Action Contact customer support.
Error Message     
%OS-RDSFS-7-INIT_FAILED Failed to initialize [chars] because [chars].
Explanation RDSFS failed to initialize a module.
Recommended Action Contact customer support

REGEXP Messages
Error Message     
%OS-REGEXP-6-ENOMEM % Out of memory
Explanation *NONE*
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message     
%OS-REGEXP-6-INTERNAL % Internal error
Explanation *NONE*
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-REGEXP-6-INVALID % invalid regexp: [chars]
Explanation *NONE*
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-REGEXP-6-REGERROR % [chars]
Explanation *NONE*
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSI_AGENT Messages
Error Message     
%OS-RSI_AGENT-2-RESOURCE_DOWN Critical resource '[chars]' required to operate was unavailable: [chars]
Explanation A critical resource required to perform an operation was unavailable.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSI_AGENT-3-CONSISTENCY_CHECK '[chars]' had a value of '[chars]', which did not match the expected value '[chars]'.
Explanation A software bug when an internal data consistency check failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSI_AGENT-3-ERR_GENERAL '[chars]' failed: [chars]
Explanation Some requested operation failed. The text of the message displays the failed operation with error code.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSI_AGENT-3-ERR_INIT '[chars]' failed during initialization: [chars]
Explanation Initialization of a required module failed. The process was unable to continue.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSI_AGENT-3-INTF_MAPPING_CHANGE Unexpected interface name:handle mapping change from [chars]:[hex] to [chars]:[hex].
Explanation An interface handle was received which does not match the interface handle already in the database.
Recommended Action *SUPPORT
Error Message     
%OS-RSI_AGENT-3-NONRESPONSIVE_CLIENT Client '[chars]' has not processed an update [dec] seconds after being notified. Forcing reconnect. PID=[dec],
Explanation RSI is forcing the specified client to reconnect, as the client has not processed a notification after a substantial timeout period.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSI_MASTER Messages
Error Message     
%OS-RSI_MASTER-2-ERR_MEM_ALLOC Insufficient memory for '[chars]', [unsigned int] bytes, terminating
Explanation RSI Master terminated due to lack of memory for a critical operation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSI_MASTER-3-ERR_GENERAL '[chars]' failed: [chars]
Explanation Some requested operation failed. The text of the message displays the failed operation with error code.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSI_MASTER-3-ERR_GENERAL_NO_RC [chars]
Explanation Some requested operation failed. The text of the message displays the failed operation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RSVDPMEM Messages
Error Message     
%OS-RSVDPMEM-3-BAD_DATAFILE_VALUES Values from [chars] are invalid. data=[chars]. start=[dec], end=[dec].
Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSVDPMEM-3-BAD_RETURN_VALUES Did not set return values correctly. start=[dec], end=[dec], base_addr=[hex], mem_size=[dec], mem_physical_start=[hex], mem_physical_size=[dec].
Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSVDPMEM-3-INVALID_PARAMS Invalid parameters passed to function. [chars] is NULL
Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSVDPMEM-3-MEMUTIL_FIND_FAIL memutil_find_reserved_mem returned invalid memory reservation - mem_physical_start=[hex], mem_physical_size=[hex].
Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSVDPMEM-3-NO_MATCHING_STRING Failed to find any line in [chars] containing string: [chars]
Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSVDPMEM-3-OPEN_FAIL Open of [chars] failed. Error [chars]
Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RSVDPMEM-3-SSCANF_FAIL sscanf function failed to match required number of parameters. Matched [dec], error: [chars]. data=[chars].
Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

RT_CHECK_LIB Messages
Error Message     
%OS-RT_CHECK_LIB-3-CERR_REGISTER_DLL Could not register dll with error services: [chars]
Explanation The call register the dll using cerr_register_dll failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-DEBUG_SERVICES debug services function [chars] failed
Explanation A call to a debug services interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-EVENT_MANAGER event manager function [chars] failed: [chars]
Explanation A call to an event manager interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-GSP_CONN [chars]: error connecting with Group Services: [chars]
Explanation A call to group_join() failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-GSP_LOOKUP [chars]: error group lookup with Group Services: [chars]
Explanation A call to group_lookup() failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-GSP_NOTIFY [chars]: error group set notify with Group Services: [chars]
Explanation A call to group_set_notify() failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-GSP_SEND [chars]: error sending with Group Services: [chars]
Explanation A call to group_send() failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-MGD_TIMER mgd timer function [chars] failed
Explanation A call to a mgd timer interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK_LIB-3-PTHREAD Pthread operation [chars] [hex] failed: [chars]
Explanation A pthread operation failed
Recommended Action Contact support.

RT_CHECK Messages
Error Message     
%OS-RT_CHECK-3-BCDL_REQ BCDL [chars] request failure, error [dec]: [chars]
Explanation A call to a BCDL interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-CHAN_CONN [chars] msg chan connect failed: [chars], error [dec]: [chars]
Explanation A call to a LWM API failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-DEBUG_SERVICES debug services function [chars] failed
Explanation A call to a debug services interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-EDM_DATALIST_ADD_FAILED Failed to add an external data manager datalist for [chars]
Explanation A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-EDM_DATALIST_CREATE_FAILED Failed to create external data manager datalist for [chars]
Explanation A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-EDM_ENCODE_FAILED Failed to encode [chars] data in external data manager
Explanation A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-EDM_LIST_ADD_FAILED Failed to add to an external data manager list for [chars]
Explanation A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-EDM_LIST_CREATE_FAILED Failed to create external data manager list for [chars]
Explanation A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-EDM_REGISTER_FAILED Failed to register its external data manager: [chars]
Explanation The process failed when attempting to register its external data manager with SysDB.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-EVENT_MANAGER event manager function [chars] failed: [chars]
Explanation A call to an event manager interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-GROUP group services function [chars] failed, error [dec]: [chars]
Explanation A call to a group services interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-MEMORY Memory allocation error.
Explanation Malloc or calloc returned a null pointer. This indicates an out of memory condition. The rt_check process will exit or return.
Recommended Action Collect system log information.
Error Message     
%OS-RT_CHECK-3-MGD_TIMER mgd timer function [chars] failed
Explanation A call to a mgd timer interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-PTHREAD pthread function [chars] failed
Explanation A call to a pthread interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-PTHREAD_MUTEX Pthread operation [chars] [hex] failed: [chars]
Explanation The mutex lock/unlock failed
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-RSI_INIT Failed to initialize RSI client library: [chars]
Explanation Failed to initialize RSI global client library
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-RSI_TBL_ID Failed to get RSI tbl id from vrf name: [chars]
Explanation The RSI failed to translate a vrf name into a tbl id.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-RSI_VRF_NAME Failed to get RSI vrf name from tbl id: [chars]
Explanation The RSI failed to translate a tbl id to a vrf name.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-RT_CHECK-3-SYSDB [chars]
Explanation A call to a sysdb interface failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-TIMER_INIT timer init failed
Explanation A call to the rt_check timer init routine failed.
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-3-USAGE usage: [chars] [-m] [-u] [-M] [-U]
Explanation Incorrect command line arguments were given to the module
Recommended Action Contact support.
Error Message     
%OS-RT_CHECK-6-EDM_BAG_REGISTRATION_FAILED Failed to register its external data manager data blocks: [chars]
Explanation The process failed while attempting to register its external data manager data blocks with SysDB.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SHMWIN_SVR Messages
Error Message     
%OS-SHMWIN_SVR-3-EVM_ERROR [chars], Error: [chars]
Explanation Failed in some event management functions.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-GLOBAL_MUTEX_ERR [chars] ([dec], [chars])
Explanation Mutex lock/unlock failure has occurred for shmwins open/close operation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-LWM_ERROR [chars], Error: [chars]
Explanation Failed to execute some LWM library functions.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-MAIN_INIT Initialization in main failed, Error: [chars]
Explanation One of the functions called during initialization of the process failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-MMAP_FAIL Failed to mmap [chars]
Explanation mmap of the shared memory required to store servers tree nodes failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-MSG_ERROR Received a bad message, [chars]
Explanation The message received by the server had inconsistent values.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-NO_MEMORY Failed in allocating memory
Explanation Not enough memory available in the system.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-PLATFORM_FILE [chars], Error: [chars]
Explanation Problem opening/reading from the platform shmwin file.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-QSM_ERROR Failed to publish QSM namespace, [chars]
Explanation The server failed in advertising its namespace through QSM
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-SHM_ERROR [chars] [chars], Error: [chars]
Explanation There was a problem with the shared memory file allocation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-SHMWIN_SIZE [chars] area's size [dec] is smaller than [dec](shmwin header size)
Explanation Opened shmwin size is smaller the shmwin header size.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-SVR_ERR [chars]
Explanation An error has occurred in a server operation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-3-WINDOW_MUTEX_ERR [chars] window:[chars] ([dec], [chars])
Explanation Mutex lock/unlock failure has occurred for a shmwin open/close operation.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN_SVR-6-SHARED_MUTEX_REVIVED The shmwin control mutex was revived by shmwin_svr
Explanation A participant process crashed while holding the shared shmwin control mutex and the shmwin_svr revived the mutex.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SHMWIN Messages
Error Message     
%OS-SHMWIN-2-ERROR_ENCOUNTERED SHMWIN: Error encountered: [chars]
Explanation SHMWIN hit an error, which is described by the description printed
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-2-SHARED_PAGE_ERROR SHMWIN: Shared page related error encountered: [chars]: failed with [chars]
Explanation SHMWIN hit an error related to the shared page.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-ALLOC_ARENA_FAILED SHMWIN: Failed to allocate new arena from the server : [chars]
Explanation SHMWIN failed to allocate the arena's virtual range from the server.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-FREE_ARENA_FAILED SHMWIN: Failed to free VM at address [hex] back to the server : [chars]
Explanation SHMWIN failed to free the arena's virtual range back to the server.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-FSTAT_FAILED SHMWIN: fstat call for [chars] failed, error: [chars][[dec]]
Explanation SHMWIN encountered an error condition, a fstat call failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-FTRUNCATE_FAILED SHMWIN: [chars]: ftruncate for [chars] to size [dec] failed, error: [chars][[dec]]
Explanation SHMWIN encountered an error condition, the ftruncate failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-MMAP_FAILED SHMWIN: [chars]: mmap at pid [dec] address [hex] size [dec] failed, error: [chars][[dec]]
Explanation SHMWIN encountered an error condition, the mmap failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-MUNMAP_FAILED SHMWIN: [chars]: munmap at pid [dec] address [hex] size [dec] failed, error: [chars][[dec]]
Explanation SHMWIN encountered an error condition, the munmap failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-MUTEXOP_FAILED SHMWIN: [chars] failed, error: [chars][[dec]]
Explanation SHMWIN encountered an error condition, the a mutex operation failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-3-OPEN_FAILED SHMWIN: shm open for [chars] failed, error: [chars][[dec]]
Explanation SHMWIN encountered an error condition, the shm open failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SHMWIN-6-FILE_EXISTS SHMWIN: [chars]: shmwin found file [chars] of size [dec] existing when not expecting, trying to continue
Explanation SHMWIN encountered an error condition, the file was existing already.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SPAIPC_NETIO Messages
Error Message     
%OS-SPAIPC_NETIO-7-BASE_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])
Explanation qnetbase_builder_func() called with bad chain type.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SPAIPC_NETIO-7-BASE_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Base Control function erroneously called!
Explanation qnetbase_control_func() wrongly called.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SPAIPC_NETIO-7-CAPS_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])
Explanation qnetcaps_builder_func() called with wrong chain type.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SPAIPC_NETIO-7-DEBUG_INIT_FAILED [chars]:[dec] spaipc-base to register debug.
Explanation debug_register() failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SPAIPC_NETIO-7-ENCAPS_FUNC_ERR [chars]:[dec]:[chars]: Qnet encapsulation node erroneously called!
Explanation qnetcaps_encaps() has been called, which should never happen.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SPAIPC_NETIO-7-PAK_INPUT_FAIL [chars]:[dec]:[chars]: packet_input returned non-zero result code ([dec])
Explanation netio_dll_packet_input_NEW() to Qnet failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-SPAIPC_NETIO-7-UINT32_GET [chars]:[dec] failed to get destination slot. error [dec]
Explanation pak_netio_uint32_get() failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

	Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
	Operating System (OS) Messages
Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 Preface Overview Diagnostic Messages Fabric Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Replicator Messages Routing Messages Security Messages Simple Network Management Protocol (SNMP) Messages System Database Messages Index	Download this chapter Operating System (OS) Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents Operating System (OS) Messages RDS Messages RDSFS Messages REGEXP Messages RSI_AGENT Messages RSI_MASTER Messages RSVDPMEM Messages RT_CHECK_LIB Messages RT_CHECK Messages SHMWIN_SVR Messages SHMWIN Messages SPAIPC_NETIO Messages Operating System (OS) Messages This section contains all Operating System(OS) and OS infrastructure related System Error Messages. The following facility codes are represented in this module: •RDS Messages •RDSFS Messages •REGEXP Messages •RSI_AGENT Messages •RSI_MASTER Messages •RSVDPMEM Messages •RT_CHECK_LIB Messages •RT_CHECK Messages •SHMWIN_SVR Messages •SHMWIN Messages •SPAIPC_NETIO Messages RDS Messages Error Message %OS-RDS-3-LOCK_FAILURE [chars] failed, errno=[dec] Explanation Lock/Unlock operation failed. Recommended Action Contact support. Error Message %OS-RDS-3-NRS_CREATE_CLASS [chars]: nrs_create_class for [chars] failed, errno=[dec] Explanation nrs_create_class failed. Recommended Action Contact support. Error Message %OS-RDS-3-NRS_REGISTER_BULK [chars]: nrs_register_bulk for CH=[hex] failed, rc=[dec] errno=[dec] Explanation nrs_register_bulk failed. Recommended Action Contact support. Error Message %OS-RDS-3-PENDING_MSG [chars]: couldnt create pending msg for CH=[hex], DH=[hex], errno=[dec] Explanation couldnt create pending msg for the incoming write/publish. Recommended Action Contact support. Error Message %OS-RDS-3-SNAP_DUMP [chars]: handle=[hex] memory ptr=0x[pointer] Explanation rds hit an internal error. Recommended Action Contact support. Error Message %OS-RDS-3-SYNC_CREATE TID=[dec]: gs_sync_create failed for tag [hex], err [dec] Explanation Ticket create failed. Recommended Action Contact support. Error Message %OS-RDS-3-SYNC_RELEASE_FAILED TID=[dec]: Ticket Release failed rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec] Explanation Ticket request timed out. Recommended Action Contact support. Error Message %OS-RDS-3-SYNC_REQUEST TID=[dec]: Ticket Request failed for ticket [hex], rp [pointer], err [dec] Explanation Ticket request failed. Recommended Action Contact support. Error Message %OS-RDS-3-SYNC_REQUEST_TIMED_OUT TID=[dec]: Tick Req Timed out rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec], RETRYING... Explanation Ticket request timed out. Recommended Action Contact support. Error Message %OS-RDS-3-SYNC_REQUEST_UNEXPECTED TID=[dec]: Tick Req unknown failure, rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] waitcnt=[dec] rc=[dec] errno=[dec] Explanation Ticket request failed with unknown error. Recommended Action Contact support. Error Message %OS-RDS-3-WRITE_TIMEDOUT rds_write DHDL=[hex]([chars]), req=[dec], resp=[dec], #wtrs=[dec]: [chars], errno=[dec], retries=[dec] Explanation rds_write request timed out. Recommended Action Contact support. Error Message %OS-RDS-4-COND_TIMED_WAIT TID=[dec]: Unexpected error=[dec] from pthread_cond_timedwait cmd=[dec] Explanation pthread_cond_timedwait failed. Recommended Action Contact support. Error Message %OS-RDS-4-RING_LOOKUP Lookup of identifier=[hex] index=[hex] in RING=[pointer] failed Explanation atomic tag ring lookup failed. Recommended Action Contact support. Error Message %OS-RDS-7-BAD_RDSTYPE TID=[dec]: [dec]: Wrong replica type passed, expected=[dec].. Explanation passed in replica_id is wrong. Recommended Action Contact support. Error Message %OS-RDS-7-DUPLICATE_TICKET_NOTIF TID=[dec]: [dec]: Duplicate Tick Notif (Dropping it) rp=[pointer] tick=[hex] curr=[dec] hi=[dec] currturn=[hex] next=[hex] TickCurr=[dec] TickHi=[dec] state=[hex] Explanation Got a ticket notification, for an already active ticket. Recommended Action Contact support. Error Message %OS-RDS-7-GENERIC_FAILURE_MSG [chars][dec] Explanation This is a generic error msg. Recommended Action Contact support. Error Message %OS-RDS-7-GET_DH_ENTRY [dec]: No entry for Datahandle=[hex], rp=[pointer] vec=[pointer] errno=[dec] Explanation Could find datahandle entry in the vector for replica Recommended Action Contact support. Error Message %OS-RDS-7-GET_REPLICA [dec]: [chars] for CH=[hex], errno=[dec], rds_type=[dec] Explanation Couldnt get the replica entry Recommended Action Contact support. Error Message %OS-RDS-7-GROUP_SEND_RINFO [chars]: group_send_rinfo failed GID=[hex], errno=[dec], rc=[dec], #resp=[dec], pattern=[chars] Explanation group_send_rinfo failed. Recommended Action Contact support. Error Message %OS-RDS-7-GSM_FAIL GSM for [chars] Failed for Handle=[hex], to (g:[hex]/n:[hex]/p:[dec]), errno=[dec] Explanation group_send_memberset failed. Recommended Action Contact support. Error Message %OS-RDS-7-INVALID_ARGS [dec]: invalid args passed Explanation a function was invoked with invalid arguments Recommended Action Contact support. Error Message %OS-RDS-7-INVALID_RHDR [dec]: invalid rhdr=[pointer] passed Explanation a function was invoked with invalid rhdr msg Recommended Action Contact support. Error Message %OS-RDS-7-NO_PREQ_ENTRY [chars].[dec]: [chars] rp=[pointer] nptr=[pointer] from sender=g:[dec]/n:[dec]/p:[dec] Explanation Couldnt find pending request entry in the pending list. Recommended Action Contact support. Error Message %OS-RDS-7-NRS_DECODE [chars], Datahandle=[hex], errno=[dec] Explanation An internal NRS function failed. Recommended Action Contact support. Error Message %OS-RDS-7-NRS_SEARCH [chars]: nrs_search for [chars] failed, rc=[dec] errno=[dec] Explanation nrs_search failed. Recommended Action Contact support. Error Message %OS-RDS-7-QUERY_PEERS_TIMED_OUT TID=[dec] Couldnt cmd=[dec] for GID=[hex] CHDL=[hex]([hex]) #to_resp=[dec] req=[dec] got=[dec] state=[hex], expstate=[hex] preq_id=[dec] rds_type=[dec] Explanation Ticket request timed out. Recommended Action Contact support. Error Message %OS-RDS-7-READ_FAILED [chars] DH_ENTRY=[hex] for exp_len=[dec] got=[dec] rc=[dec] errno=[dec] Explanation ens_read API failed. Recommended Action Contact support. Error Message %OS-RDS-7-WRONG_PLANE [dec]: Wrong plane [dec] for [chars] failed.. Explanation ens_bulk_register failed. Recommended Action Contact support. RDSFS Messages Error Message %OS-RDSFS-4-BAD_REPLICA Bad Replica detected: Condition-[chars] Path-[chars] Error-[chars]. Explanation The current instance of RDSFS encountered an error so that it is no longer a replica. Recommended Action Contact customer support. Error Message %OS-RDSFS-7-DEBUG PID:TID=[dec]:[dec] [chars] [chars] Error-[chars] Explanation RDSFS failure. Recommended Action Contact customer support. Error Message %OS-RDSFS-7-FAILURE [chars] [chars] Error-[chars] Explanation RDSFS failure. Recommended Action Contact customer support. Error Message %OS-RDSFS-7-INIT_FAILED Failed to initialize [chars] because [chars]. Explanation RDSFS failed to initialize a module. Recommended Action Contact customer support REGEXP Messages Error Message %OS-REGEXP-6-ENOMEM % Out of memory Explanation NONE Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error Message %OS-REGEXP-6-INTERNAL % Internal error Explanation NONE Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-REGEXP-6-INVALID % invalid regexp: [chars] Explanation NONE Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-REGEXP-6-REGERROR % [chars] Explanation NONE Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. RSI_AGENT Messages Error Message %OS-RSI_AGENT-2-RESOURCE_DOWN Critical resource '[chars]' required to operate was unavailable: [chars] Explanation A critical resource required to perform an operation was unavailable. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSI_AGENT-3-CONSISTENCY_CHECK '[chars]' had a value of '[chars]', which did not match the expected value '[chars]'. Explanation A software bug when an internal data consistency check failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSI_AGENT-3-ERR_GENERAL '[chars]' failed: [chars] Explanation Some requested operation failed. The text of the message displays the failed operation with error code. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSI_AGENT-3-ERR_INIT '[chars]' failed during initialization: [chars] Explanation Initialization of a required module failed. The process was unable to continue. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSI_AGENT-3-INTF_MAPPING_CHANGE Unexpected interface name:handle mapping change from [chars]:[hex] to [chars]:[hex]. Explanation An interface handle was received which does not match the interface handle already in the database. Recommended Action *SUPPORT Error Message %OS-RSI_AGENT-3-NONRESPONSIVE_CLIENT Client '[chars]' has not processed an update [dec] seconds after being notified. Forcing reconnect. PID=[dec], Explanation RSI is forcing the specified client to reconnect, as the client has not processed a notification after a substantial timeout period. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. RSI_MASTER Messages Error Message %OS-RSI_MASTER-2-ERR_MEM_ALLOC Insufficient memory for '[chars]', [unsigned int] bytes, terminating Explanation RSI Master terminated due to lack of memory for a critical operation. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSI_MASTER-3-ERR_GENERAL '[chars]' failed: [chars] Explanation Some requested operation failed. The text of the message displays the failed operation with error code. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSI_MASTER-3-ERR_GENERAL_NO_RC [chars] Explanation Some requested operation failed. The text of the message displays the failed operation. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. RSVDPMEM Messages Error Message %OS-RSVDPMEM-3-BAD_DATAFILE_VALUES Values from [chars] are invalid. data=[chars]. start=[dec], end=[dec]. Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSVDPMEM-3-BAD_RETURN_VALUES Did not set return values correctly. start=[dec], end=[dec], base_addr=[hex], mem_size=[dec], mem_physical_start=[hex], mem_physical_size=[dec]. Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSVDPMEM-3-INVALID_PARAMS Invalid parameters passed to function. [chars] is NULL Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSVDPMEM-3-MEMUTIL_FIND_FAIL memutil_find_reserved_mem returned invalid memory reservation - mem_physical_start=[hex], mem_physical_size=[hex]. Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSVDPMEM-3-NO_MATCHING_STRING Failed to find any line in [chars] containing string: [chars] Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSVDPMEM-3-OPEN_FAIL Open of [chars] failed. Error [chars] Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RSVDPMEM-3-SSCANF_FAIL sscanf function failed to match required number of parameters. Matched [dec], error: [chars]. data=[chars]. Explanation Reserve Physmem encountered a severe error and is not able to recover from the error. Details are provided with the error message. Call support with this error message text. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. RT_CHECK_LIB Messages Error Message %OS-RT_CHECK_LIB-3-CERR_REGISTER_DLL Could not register dll with error services: [chars] Explanation The call register the dll using cerr_register_dll failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-DEBUG_SERVICES debug services function [chars] failed Explanation A call to a debug services interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-EVENT_MANAGER event manager function [chars] failed: [chars] Explanation A call to an event manager interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-GSP_CONN [chars]: error connecting with Group Services: [chars] Explanation A call to group_join() failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-GSP_LOOKUP [chars]: error group lookup with Group Services: [chars] Explanation A call to group_lookup() failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-GSP_NOTIFY [chars]: error group set notify with Group Services: [chars] Explanation A call to group_set_notify() failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-GSP_SEND [chars]: error sending with Group Services: [chars] Explanation A call to group_send() failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-MGD_TIMER mgd timer function [chars] failed Explanation A call to a mgd timer interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK_LIB-3-PTHREAD Pthread operation [chars] [hex] failed: [chars] Explanation A pthread operation failed Recommended Action Contact support. RT_CHECK Messages Error Message %OS-RT_CHECK-3-BCDL_REQ BCDL [chars] request failure, error [dec]: [chars] Explanation A call to a BCDL interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-CHAN_CONN [chars] msg chan connect failed: [chars], error [dec]: [chars] Explanation A call to a LWM API failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-DEBUG_SERVICES debug services function [chars] failed Explanation A call to a debug services interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-EDM_DATALIST_ADD_FAILED Failed to add an external data manager datalist for [chars] Explanation A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager datalist has failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-EDM_DATALIST_CREATE_FAILED Failed to create external data manager datalist for [chars] Explanation A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager datalist has failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-EDM_ENCODE_FAILED Failed to encode [chars] data in external data manager Explanation A process has requested information through SysDB, probably as the result of executing a show command. The data requested could not be encoded. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-EDM_LIST_ADD_FAILED Failed to add to an external data manager list for [chars] Explanation A process has requested information through SysDB, probably as the result of executing a show command. The attempt to add an item to an external data manager list has failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-EDM_LIST_CREATE_FAILED Failed to create external data manager list for [chars] Explanation A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-EDM_REGISTER_FAILED Failed to register its external data manager: [chars] Explanation The process failed when attempting to register its external data manager with SysDB. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-EVENT_MANAGER event manager function [chars] failed: [chars] Explanation A call to an event manager interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-GROUP group services function [chars] failed, error [dec]: [chars] Explanation A call to a group services interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-MEMORY Memory allocation error. Explanation Malloc or calloc returned a null pointer. This indicates an out of memory condition. The rt_check process will exit or return. Recommended Action Collect system log information. Error Message %OS-RT_CHECK-3-MGD_TIMER mgd timer function [chars] failed Explanation A call to a mgd timer interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-PTHREAD pthread function [chars] failed Explanation A call to a pthread interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-PTHREAD_MUTEX Pthread operation [chars] [hex] failed: [chars] Explanation The mutex lock/unlock failed Recommended Action Contact support. Error Message %OS-RT_CHECK-3-RSI_INIT Failed to initialize RSI client library: [chars] Explanation Failed to initialize RSI global client library Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-RSI_TBL_ID Failed to get RSI tbl id from vrf name: [chars] Explanation The RSI failed to translate a vrf name into a tbl id. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-RSI_VRF_NAME Failed to get RSI vrf name from tbl id: [chars] Explanation The RSI failed to translate a tbl id to a vrf name. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-RT_CHECK-3-SYSDB [chars] Explanation A call to a sysdb interface failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-TIMER_INIT timer init failed Explanation A call to the rt_check timer init routine failed. Recommended Action Contact support. Error Message %OS-RT_CHECK-3-USAGE usage: [chars] [-m] [-u] [-M] [-U] Explanation Incorrect command line arguments were given to the module Recommended Action Contact support. Error Message %OS-RT_CHECK-6-EDM_BAG_REGISTRATION_FAILED Failed to register its external data manager data blocks: [chars] Explanation The process failed while attempting to register its external data manager data blocks with SysDB. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. SHMWIN_SVR Messages Error Message %OS-SHMWIN_SVR-3-EVM_ERROR [chars], Error: [chars] Explanation Failed in some event management functions. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-GLOBAL_MUTEX_ERR [chars] ([dec], [chars]) Explanation Mutex lock/unlock failure has occurred for shmwins open/close operation. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-LWM_ERROR [chars], Error: [chars] Explanation Failed to execute some LWM library functions. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-MAIN_INIT Initialization in main failed, Error: [chars] Explanation One of the functions called during initialization of the process failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-MMAP_FAIL Failed to mmap [chars] Explanation mmap of the shared memory required to store servers tree nodes failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-MSG_ERROR Received a bad message, [chars] Explanation The message received by the server had inconsistent values. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-NO_MEMORY Failed in allocating memory Explanation Not enough memory available in the system. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-PLATFORM_FILE [chars], Error: [chars] Explanation Problem opening/reading from the platform shmwin file. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-QSM_ERROR Failed to publish QSM namespace, [chars] Explanation The server failed in advertising its namespace through QSM Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-SHM_ERROR [chars] [chars], Error: [chars] Explanation There was a problem with the shared memory file allocation. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-SHMWIN_SIZE [chars] area's size [dec] is smaller than [dec](shmwin header size) Explanation Opened shmwin size is smaller the shmwin header size. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-SVR_ERR [chars] Explanation An error has occurred in a server operation. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-3-WINDOW_MUTEX_ERR [chars] window:[chars] ([dec], [chars]) Explanation Mutex lock/unlock failure has occurred for a shmwin open/close operation. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN_SVR-6-SHARED_MUTEX_REVIVED The shmwin control mutex was revived by shmwin_svr Explanation A participant process crashed while holding the shared shmwin control mutex and the shmwin_svr revived the mutex. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. SHMWIN Messages Error Message %OS-SHMWIN-2-ERROR_ENCOUNTERED SHMWIN: Error encountered: [chars] Explanation SHMWIN hit an error, which is described by the description printed Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-2-SHARED_PAGE_ERROR SHMWIN: Shared page related error encountered: [chars]: failed with [chars] Explanation SHMWIN hit an error related to the shared page. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-ALLOC_ARENA_FAILED SHMWIN: Failed to allocate new arena from the server : [chars] Explanation SHMWIN failed to allocate the arena's virtual range from the server. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-FREE_ARENA_FAILED SHMWIN: Failed to free VM at address [hex] back to the server : [chars] Explanation SHMWIN failed to free the arena's virtual range back to the server. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-FSTAT_FAILED SHMWIN: fstat call for [chars] failed, error: [chars][[dec]] Explanation SHMWIN encountered an error condition, a fstat call failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-FTRUNCATE_FAILED SHMWIN: [chars]: ftruncate for [chars] to size [dec] failed, error: [chars][[dec]] Explanation SHMWIN encountered an error condition, the ftruncate failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-MMAP_FAILED SHMWIN: [chars]: mmap at pid [dec] address [hex] size [dec] failed, error: [chars][[dec]] Explanation SHMWIN encountered an error condition, the mmap failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-MUNMAP_FAILED SHMWIN: [chars]: munmap at pid [dec] address [hex] size [dec] failed, error: [chars][[dec]] Explanation SHMWIN encountered an error condition, the munmap failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-MUTEXOP_FAILED SHMWIN: [chars] failed, error: [chars][[dec]] Explanation SHMWIN encountered an error condition, the a mutex operation failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-3-OPEN_FAILED SHMWIN: shm open for [chars] failed, error: [chars][[dec]] Explanation SHMWIN encountered an error condition, the shm open failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SHMWIN-6-FILE_EXISTS SHMWIN: [chars]: shmwin found file [chars] of size [dec] existing when not expecting, trying to continue Explanation SHMWIN encountered an error condition, the file was existing already. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. SPAIPC_NETIO Messages Error Message %OS-SPAIPC_NETIO-7-BASE_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec]) Explanation qnetbase_builder_func() called with bad chain type. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SPAIPC_NETIO-7-BASE_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Base Control function erroneously called! Explanation qnetbase_control_func() wrongly called. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SPAIPC_NETIO-7-CAPS_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec]) Explanation qnetcaps_builder_func() called with wrong chain type. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SPAIPC_NETIO-7-DEBUG_INIT_FAILED [chars]:[dec] spaipc-base to register debug. Explanation debug_register() failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SPAIPC_NETIO-7-ENCAPS_FUNC_ERR [chars]:[dec]:[chars]: Qnet encapsulation node erroneously called! Explanation qnetcaps_encaps() has been called, which should never happen. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SPAIPC_NETIO-7-PAK_INPUT_FAIL [chars]:[dec]:[chars]: packet_input returned non-zero result code ([dec]) Explanation netio_dll_packet_input_NEW() to Qnet failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-SPAIPC_NETIO-7-UINT32_GET [chars]:[dec] failed to get destination slot. error [dec] Explanation pak_netio_uint32_get() failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks