Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 - Media Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Media Messages

SYNCFS2 Messages

SYNCFS2LIB Messages

Media Messages

This section contains all MEDIA related System Error Messages, including disk, nvram, flash, and so forth. The following facility codes are represented in this module:

•SYNCFS2 Messages

•SYNCFS2LIB Messages

SYNCFS2 Messages
Error Message     
%MEDIA-SYNCFS2-3-FAILURE [chars] [chars]: [chars]
Explanation Syncfs failure
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-3-INIT_FAILED Failed to initialize module [chars] because [chars] and cannot continue.
Explanation Syncfs failed to initialize a module.
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-3-REGISTER_NTFN Failed to register with [chars] for notification
Explanation Syncfs failed to register with qsm/lrd for notification
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-3-STBY_SYMLINK Failed to create link to Standby card: [chars]
Explanation Syncfs failed to create required links to the standby card. Syncfs unable to mirror any files to the standby card.
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-3-STBY_SYMLINK_NOTYET Symbolic Links to Standby root is not published yet.
Explanation Syncfs noticed that required symbolic-links to the standby card, is not published yet. Syncfs will get notified when they are available.
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-7-CLIENT_ERR [chars]: [chars]
Explanation Failed function call.
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-7-LOST_SYNC Unable to replicate [chars] [chars] to standby card because [chars]
Explanation Syncfs failed to transfer the specified file to the standby card.
Recommended Action Ensure there is sufficient disk space on standby card's filesystems, and that all removeable media is correctly inserted. Once resolved, power cycle the standby card using 'hw-module slot X shut' and 'no hw-module slot X shut' to resume synchronization.
Error Message     
%MEDIA-SYNCFS2-7-LRD_AVAILABLE Standby has become AVAILABLE - START SYNC
Explanation The Standby card has been inserted and sync will be started
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%MEDIA-SYNCFS2-7-LRD_NOTAVAILABLE Standby has been rendered UNAVAILABLE - STOP SYNC
Explanation The Standby card has been either removed or put down by admin
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%MEDIA-SYNCFS2-7-LRD_PARTNER_AVAILABLE Standby has become AVAILABLE. LRD returned partner-node - START SYNC
Explanation The Standby card has been inserted and sync will be started
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%MEDIA-SYNCFS2-7-MUTEX_LOCK Failed to lock mutex [chars]
Explanation A required mutex lock failed.
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-7-MUTEX_TEST_LOCK Mutex [chars] was found unlocked
Explanation A mutex which should have been locked was tested and found unlocked
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-7-MUTEX_UNLOCK Failed to unlock a mutex [chars]
Explanation A required mutex unlock failed.
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2-7-REPLICATE_FAIL Replication of [chars] [chars] failed: [chars] -- Retry will be attempted.
Explanation Syncfs failed to replicate file/dir, it will retry it again.
Recommended Action Contact customer support

SYNCFS2LIB Messages
Error Message     
%MEDIA-SYNCFS2LIB-6-LOST_SYNC File [chars] lost synchronization to standby card
Explanation Syncfs failed to transfer a file to the standby card. If a card failover occurs, some data may be lost.
Recommended Action None
Error Message     
%MEDIA-SYNCFS2LIB-7-MUTEX_LOCK Failed to lock mutex for file [chars]
Explanation A required mutex lock failed.
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2LIB-7-MUTEX_TEST_LOCK Mutex for file [chars] was found unlocked
Explanation A mutex which should have been locked was tested and found unlocked
Recommended Action Contact customer support
Error Message     
%MEDIA-SYNCFS2LIB-7-MUTEX_UNLOCK Failed to unlock mutex for file [chars]
Explanation A required mutex unlock failed.

	Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
	Media Messages
Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 Preface Overview Diagnostic Messages Fabric Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Replicator Messages Routing Messages Security Messages Simple Network Management Protocol (SNMP) Messages System Database Messages Index	Download this chapter Media Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents Media Messages SYNCFS2 Messages SYNCFS2LIB Messages Media Messages This section contains all MEDIA related System Error Messages, including disk, nvram, flash, and so forth. The following facility codes are represented in this module: •SYNCFS2 Messages •SYNCFS2LIB Messages SYNCFS2 Messages Error Message %MEDIA-SYNCFS2-3-FAILURE [chars] [chars]: [chars] Explanation Syncfs failure Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-3-INIT_FAILED Failed to initialize module [chars] because [chars] and cannot continue. Explanation Syncfs failed to initialize a module. Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-3-REGISTER_NTFN Failed to register with [chars] for notification Explanation Syncfs failed to register with qsm/lrd for notification Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-3-STBY_SYMLINK Failed to create link to Standby card: [chars] Explanation Syncfs failed to create required links to the standby card. Syncfs unable to mirror any files to the standby card. Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-3-STBY_SYMLINK_NOTYET Symbolic Links to Standby root is not published yet. Explanation Syncfs noticed that required symbolic-links to the standby card, is not published yet. Syncfs will get notified when they are available. Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-7-CLIENT_ERR [chars]: [chars] Explanation Failed function call. Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-7-LOST_SYNC Unable to replicate [chars] [chars] to standby card because [chars] Explanation Syncfs failed to transfer the specified file to the standby card. Recommended Action Ensure there is sufficient disk space on standby card's filesystems, and that all removeable media is correctly inserted. Once resolved, power cycle the standby card using 'hw-module slot X shut' and 'no hw-module slot X shut' to resume synchronization. Error Message %MEDIA-SYNCFS2-7-LRD_AVAILABLE Standby has become AVAILABLE - START SYNC Explanation The Standby card has been inserted and sync will be started Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %MEDIA-SYNCFS2-7-LRD_NOTAVAILABLE Standby has been rendered UNAVAILABLE - STOP SYNC Explanation The Standby card has been either removed or put down by admin Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %MEDIA-SYNCFS2-7-LRD_PARTNER_AVAILABLE Standby has become AVAILABLE. LRD returned partner-node - START SYNC Explanation The Standby card has been inserted and sync will be started Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %MEDIA-SYNCFS2-7-MUTEX_LOCK Failed to lock mutex [chars] Explanation A required mutex lock failed. Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-7-MUTEX_TEST_LOCK Mutex [chars] was found unlocked Explanation A mutex which should have been locked was tested and found unlocked Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-7-MUTEX_UNLOCK Failed to unlock a mutex [chars] Explanation A required mutex unlock failed. Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2-7-REPLICATE_FAIL Replication of [chars] [chars] failed: [chars] -- Retry will be attempted. Explanation Syncfs failed to replicate file/dir, it will retry it again. Recommended Action Contact customer support SYNCFS2LIB Messages Error Message %MEDIA-SYNCFS2LIB-6-LOST_SYNC File [chars] lost synchronization to standby card Explanation Syncfs failed to transfer a file to the standby card. If a card failover occurs, some data may be lost. Recommended Action None Error Message %MEDIA-SYNCFS2LIB-7-MUTEX_LOCK Failed to lock mutex for file [chars] Explanation A required mutex lock failed. Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2LIB-7-MUTEX_TEST_LOCK Mutex for file [chars] was found unlocked Explanation A mutex which should have been locked was tested and found unlocked Recommended Action Contact customer support Error Message %MEDIA-SYNCFS2LIB-7-MUTEX_UNLOCK Failed to unlock mutex for file [chars] Explanation A required mutex unlock failed.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks