Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 - Internet Protocol (IP) Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Internet Protocol (IP) Messages

RLOGIND Messages

RSHD Messages

SMIAP Messages

SOCKET Messages

STANDBY Messages

Internet Protocol (IP) Messages

This section contains all Internet Protocol related System Error Messages. The following facility codes are represented in this module:

•RLOGIND Messages

•RSHD Messages

•SMIAP Messages

•SOCKET Messages

•SOCKET Messages

RLOGIND Messages
Error Message     
%IP-RLOGIND-3-ERR_CREATE_EVENTMGR Couldn't create evmgr in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%IP-RLOGIND-3-ERR_DEBUG_INIT Failed to init debug in function [chars]()
Explanation Internal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%IP-RLOGIND-3-ERR_FATAL Rlogind: fatal error [chars]
Explanation Fatal error.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%IP-RLOGIND-3-ERR_MALLOC Cannot allocate memory in function [chars]()
Explanation Internal error. System is out of memory - malloc failed.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%IP-RLOGIND-3-ERR_OPEN Failed to open a device file for a session ([dec])
Explanation An unexpected error occurred when RloginD tried to open a VTY character special file.
Recommended Action No action is required.
Error Message     
%IP-RLOGIND-3-ERR_SPAWN Can't spawn login
Explanation Internal error in spawning login child process.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%IP-RLOGIND-3-ERR_SYSDB Unexpected SysDB error encountered: [hex], '[chars]'
Explanation The Telnet Server has encountered an error using the SysDB Library.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-RLOGIND-3-ERR_TTY_DETAILS Failed to retrieve the details of a TTY Device ([hex], '[chars]')
Explanation An unexpected error occurred when RloginD tried to retrieve the details of a VTY from a utility library
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-RLOGIND-3-ERR_USAGE usage : rlogind [-alnd]
Explanation Usage error.
Recommended Action 'No action is required.'
Error Message     
%IP-RLOGIND-3-ERR_VTY_CONNECT Failed to obtain a VTY for a session: '[chars]'
Explanation An error occurred when RloginD requested a VTY for a session. This might occur if the requested rlogin session cannot be satisfied by any of the unused VTYs in the configured vty pool(s), e.g. if all VTYs are in use, if transport-input is not allowed for rlogin, or if the configured ACL does not match.
Recommended Action Check that the configured VTY pool(s) can satisfy this rlogin request based on which VTYs are currently in use. This can be checked with 'show users', and looking at the VTY pool configuration. If the configuration appears to be consistent then try to rlogin with debug rlogin detail on; this might indicate where the problem lies.
Error Message     
%IP-RLOGIND-4-ERR_SOCKET Socket operation failed: [chars]
Explanation Internal warnings related to socket operations.
Recommended Action 'No action is required.'
Error Message     
%IP-RLOGIND-6-INFO_GENERAL Rlogind: [chars]
Explanation The rlogind encountered some problem in genric nature or plain information.
Recommended Action 'No action is required.'

RSHD Messages
Error Message     
%IP-RSHD-2-ILLEGAL_PORT Illegal port: [chars]
Explanation The connection between rsh client and server must from/to a privileged port (512-1023)
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-RSHD-3-ERR_AUTH Kerberos rsh denied to [chars].[chars]@[chars]
Explanation Kerberos authentication failed.
Recommended Action No action is required.
Error Message     
%IP-RSHD-3-ERR_CREATE_EVENTMGR Failed to create event manager: [chars]
Explanation Attempt to create an event manager fails for some reason
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-RSHD-3-ERR_MALLOC Failed to allocate [dec] bytes of memory: [chars]
Explanation The server has failed to acquire the required amount of memory
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message     
%IP-RSHD-3-ERR_REGISTER_DEBUG Failed to register for debugging events: [chars]
Explanation Attempt to register with the event magager for debugging events fails
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-RSHD-3-ERR_SOCKET Socket operation failed: [chars]: [chars]
Explanation Internal warnings related to socket operations
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-RSHD-3-ERR_USAGE [chars]
Explanation Usage error.
Recommended Action No action is required.

SMIAP Messages
Error Message     
%IP-SMIAP-2-INIT_FAILED Cannot initialize [chars]: ([chars])
Explanation IPV4 SMIAP initialization failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-SMIAP-4-ADDR_CFLCT IP address [chars] configured on management interface [chars] same as virtual IP address [chars]
Explanation IP address on the management interface specified is conflicting with the virtual IP address.
Recommended Action Either change the virtual IP address to some other IP address on the management interface's network or change the conflicting IP address on the specified management interface.
Error Message     
%IP-SMIAP-4-IM_ATTR_FIND_IF_FAILED Interface '[chars]' is supposed to be a management interface, but, can't find information about it
Explanation Management interface information needs to be known in SMIAP so that it can make the virtual IP address functional.
Recommended Action If the message is for a management interface which doesn't exist anymore, e.g., due to a failover, this error can be simply ignored. If it is for an interface which is active, contact technical support.
Error Message     
%IP-SMIAP-4-INVALID_NETWORK IP address [chars]/[dec] on the management interface [chars] does not belong to same network as virtual IP address [chars]/[dec]
Explanation IP address on the management interface on the active/standby RP should be in the same network as the virtual IP address.
Recommended Action Change the IP address on the management interface or the virtual IP address so that they are in the same network and are not the same.
Error Message     
%IP-SMIAP-4-SYSMGR_FAILURE Failed to signal sysmgr about - [chars], error [chars]
Explanation SMIAP failed to signal sysmgr about its process state.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-SMIAP-4-VIRTUAL_IP_CFLCT Virtual IP address [chars] same as [chars] configured on management interface [chars]
Explanation IP address on the management interface specified is conflicting with the virtual IP address.
Recommended Action Either change the virtual IP address to some other IP address on the management interface's network or change the conflicting IP address on the specified management interface.

SOCKET Messages
Error Message     
%IP-SOCKET-4-DOUBLE_CLOSE Close was called on the socket 0x[pointer] ([chars], owned by proc [dec]) more than once
Explanation The socket library expect close to be called only once by os.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-SOCKET-7-DEBUG_INIT_EVENT Failed to initialize debug event: [chars]
Explanation The socket library (used by transports) failed to initialize a debug event.
Recommended Action The transport process will try to recover from this by retrying/ restarting. If the messages are not seen again, the problem was transitory and has been recovered. There is no need to take any action. If the messages come continuously, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-SOCKET-7-DEBUG_REGISTER Failed to register with debug library: [chars]
Explanation Failed to register with the debug library to have the library automatically handle changes to any of the SOCKET debug flags.
Recommended Action The transport process will try to recover from this by retrying/ restarting. If the messages are not seen again, the problem was transitory and has been recovered. There is no need to take any action. If the messages come continuously, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-SOCKET-7-ERR_EVM_CREATE Failed to create event manager: [chars]
Explanation The socket library failed to create event manager.
Recommended Action If the error message indicates low memory, do the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. For any other errors, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-SOCKET-7-NOFDREF NOFDREF flag on socket 0x[pointer] ([chars], owned by proc [dec]) is already set where we expect it is not set
Explanation The socket library expect the NOFDREF flag to be not set and find it is already set.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

STANDBY Messages
Error Message     
%IP-STANDBY-3-ERR_EDM_NOTIFY [chars]: Failed to generate [chars]: [chars]
Explanation HSRP has failed to notify the system that the specified event has occurred.
Recommended Action Restart the HSRP process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-3-ERR_IM Failed to get [chars] type from Interface Manager: [chars]
Explanation HSRP has failed to retrieve required information about the interface from the Interface Manager.
Recommended Action Check to see if there are any other errors on the system which may indicate a general service-related problem and restart those services. If the problem is isolated then restart HSRP. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-3-ERR_INDEX Failed to obtain snmp index for [chars]: [chars]
Explanation The HSRP process failed to obtain the snmp index for this interface. There may be a problem with the connection to certain IOSXR services.
Recommended Action Retry the configuration on this interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-3-ERR_JOIN Failed to [chars] interface [chars] on Multicast group: [chars]
Explanation The HSRP process failed to start/stop receiving HSRP packets on an interface correctly. This is an internal error.
Recommended Action Retry the configuration on the interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-3-ERR_MAC Failed to add unicast MAC address on interface [chars]: [chars]
Explanation HSRP has failed to assign a MAC address to the interface.
Recommended Action Retry the configuration on the interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-3-ERR_REGISTER Registration for [chars] failed: [chars]
Explanation Registration for an IOSXR service failed during HSRP's operation. This may indicate a connection failure with the IOSXR service as indicated in the error message.
Recommended Action Restart the HSRP process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-4-WARN_DEBUG Outputting debug information failed: [chars]
Explanation The HSRP process failed to output a debug message. This may not impact functionality but it does impair the debuggabilty of the VRRP process. And may indicate that there is a failure with the IOSXR debug infrastructure.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-4-WARN_INIT HSRP Initialization failed: [chars]: [chars]
Explanation The HSRP process failed to initialize correctly. In this situation HSRP restarts, but HSRP may not recover if there is a persistant error in the IOSXR system and HSRP is later unable to reestablish its connections and initialize successfully.
Recommended Action If HSRP does not restart and automatically recover, do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%IP-STANDBY-6-INFO_HOLDTIME Holdtime ([dec]) is less than or equal to twice the hellotime ([dec])
Explanation The holdtime has been set to a value which is less than (or equal to) twice the hello time. This is not recommended as any lost packet may result in an unnecessary state change.
Recommended Action Change the holdtime to be greater than twice the hellotime.
Error Message     
%IP-STANDBY-6-INFO_REDIRECTS_DISABLED ICMP redirects may still be enabled on this interface
Explanation Disabling HSRP filtered ICMP redirects when ICMP redirects are enabled may cause hosts to use real IP addresses as their default routes, and first hop redundancy may be lost.
Recommended Action Ensure that ICMP redirects are disabled on this interface.
Error Message     
%IP-STANDBY-6-INFO_REDIRECTS_SECONDARY ICMP redirects may be ignored by hosts if HSRP secondary addresses are used
Explanation If a host uses HSRP secondary addresses, HSRP filtered ICMP redirects may be ignored by the host (depending on the host implementation).
Recommended Action Try to avoid using HSRP secondary addresses when HSRP filtered ICMP redirects are enabled.
Error Message     
%IP-STANDBY-6-INFO_STATECHANGE SB[dec]: [chars]: state [chars]011 - [chars]
Explanation The HSRP router has changed state for the specified group and interface.
Recommended Action No action is required.

	Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4
	Internet Protocol (IP) Messages
Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.4 Preface Overview Diagnostic Messages Fabric Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 Messages Layer 2 Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Replicator Messages Routing Messages Security Messages Simple Network Management Protocol (SNMP) Messages System Database Messages Index	Download this chapter Internet Protocol (IP) Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents Internet Protocol (IP) Messages RLOGIND Messages RSHD Messages SMIAP Messages SOCKET Messages STANDBY Messages Internet Protocol (IP) Messages This section contains all Internet Protocol related System Error Messages. The following facility codes are represented in this module: •RLOGIND Messages •RSHD Messages •SMIAP Messages •SOCKET Messages •SOCKET Messages RLOGIND Messages Error Message %IP-RLOGIND-3-ERR_CREATE_EVENTMGR Couldn't create evmgr in function [chars]() Explanation Internal error. Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %IP-RLOGIND-3-ERR_DEBUG_INIT Failed to init debug in function [chars]() Explanation Internal error. Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %IP-RLOGIND-3-ERR_FATAL Rlogind: fatal error [chars] Explanation Fatal error. Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %IP-RLOGIND-3-ERR_MALLOC Cannot allocate memory in function [chars]() Explanation Internal error. System is out of memory - malloc failed. Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %IP-RLOGIND-3-ERR_OPEN Failed to open a device file for a session ([dec]) Explanation An unexpected error occurred when RloginD tried to open a VTY character special file. Recommended Action No action is required. Error Message %IP-RLOGIND-3-ERR_SPAWN Can't spawn login Explanation Internal error in spawning login child process. Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %IP-RLOGIND-3-ERR_SYSDB Unexpected SysDB error encountered: [hex], '[chars]' Explanation The Telnet Server has encountered an error using the SysDB Library. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-RLOGIND-3-ERR_TTY_DETAILS Failed to retrieve the details of a TTY Device ([hex], '[chars]') Explanation An unexpected error occurred when RloginD tried to retrieve the details of a VTY from a utility library Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-RLOGIND-3-ERR_USAGE usage : rlogind [-alnd] Explanation Usage error. Recommended Action 'No action is required.' Error Message %IP-RLOGIND-3-ERR_VTY_CONNECT Failed to obtain a VTY for a session: '[chars]' Explanation An error occurred when RloginD requested a VTY for a session. This might occur if the requested rlogin session cannot be satisfied by any of the unused VTYs in the configured vty pool(s), e.g. if all VTYs are in use, if transport-input is not allowed for rlogin, or if the configured ACL does not match. Recommended Action Check that the configured VTY pool(s) can satisfy this rlogin request based on which VTYs are currently in use. This can be checked with 'show users', and looking at the VTY pool configuration. If the configuration appears to be consistent then try to rlogin with debug rlogin detail on; this might indicate where the problem lies. Error Message %IP-RLOGIND-4-ERR_SOCKET Socket operation failed: [chars] Explanation Internal warnings related to socket operations. Recommended Action 'No action is required.' Error Message %IP-RLOGIND-6-INFO_GENERAL Rlogind: [chars] Explanation The rlogind encountered some problem in genric nature or plain information. Recommended Action 'No action is required.' RSHD Messages Error Message %IP-RSHD-2-ILLEGAL_PORT Illegal port: [chars] Explanation The connection between rsh client and server must from/to a privileged port (512-1023) Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-RSHD-3-ERR_AUTH Kerberos rsh denied to [chars].[chars]@[chars] Explanation Kerberos authentication failed. Recommended Action No action is required. Error Message %IP-RSHD-3-ERR_CREATE_EVENTMGR Failed to create event manager: [chars] Explanation Attempt to create an event manager fails for some reason Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-RSHD-3-ERR_MALLOC Failed to allocate [dec] bytes of memory: [chars] Explanation The server has failed to acquire the required amount of memory Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error Message %IP-RSHD-3-ERR_REGISTER_DEBUG Failed to register for debugging events: [chars] Explanation Attempt to register with the event magager for debugging events fails Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-RSHD-3-ERR_SOCKET Socket operation failed: [chars]: [chars] Explanation Internal warnings related to socket operations Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-RSHD-3-ERR_USAGE [chars] Explanation Usage error. Recommended Action No action is required. SMIAP Messages Error Message %IP-SMIAP-2-INIT_FAILED Cannot initialize [chars]: ([chars]) Explanation IPV4 SMIAP initialization failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-SMIAP-4-ADDR_CFLCT IP address [chars] configured on management interface [chars] same as virtual IP address [chars] Explanation IP address on the management interface specified is conflicting with the virtual IP address. Recommended Action Either change the virtual IP address to some other IP address on the management interface's network or change the conflicting IP address on the specified management interface. Error Message %IP-SMIAP-4-IM_ATTR_FIND_IF_FAILED Interface '[chars]' is supposed to be a management interface, but, can't find information about it Explanation Management interface information needs to be known in SMIAP so that it can make the virtual IP address functional. Recommended Action If the message is for a management interface which doesn't exist anymore, e.g., due to a failover, this error can be simply ignored. If it is for an interface which is active, contact technical support. Error Message %IP-SMIAP-4-INVALID_NETWORK IP address [chars]/[dec] on the management interface [chars] does not belong to same network as virtual IP address [chars]/[dec] Explanation IP address on the management interface on the active/standby RP should be in the same network as the virtual IP address. Recommended Action Change the IP address on the management interface or the virtual IP address so that they are in the same network and are not the same. Error Message %IP-SMIAP-4-SYSMGR_FAILURE Failed to signal sysmgr about - [chars], error [chars] Explanation SMIAP failed to signal sysmgr about its process state. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-SMIAP-4-VIRTUAL_IP_CFLCT Virtual IP address [chars] same as [chars] configured on management interface [chars] Explanation IP address on the management interface specified is conflicting with the virtual IP address. Recommended Action Either change the virtual IP address to some other IP address on the management interface's network or change the conflicting IP address on the specified management interface. SOCKET Messages Error Message %IP-SOCKET-4-DOUBLE_CLOSE Close was called on the socket 0x[pointer] ([chars], owned by proc [dec]) more than once Explanation The socket library expect close to be called only once by os. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-SOCKET-7-DEBUG_INIT_EVENT Failed to initialize debug event: [chars] Explanation The socket library (used by transports) failed to initialize a debug event. Recommended Action The transport process will try to recover from this by retrying/ restarting. If the messages are not seen again, the problem was transitory and has been recovered. There is no need to take any action. If the messages come continuously, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-SOCKET-7-DEBUG_REGISTER Failed to register with debug library: [chars] Explanation Failed to register with the debug library to have the library automatically handle changes to any of the SOCKET debug flags. Recommended Action The transport process will try to recover from this by retrying/ restarting. If the messages are not seen again, the problem was transitory and has been recovered. There is no need to take any action. If the messages come continuously, take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-SOCKET-7-ERR_EVM_CREATE Failed to create event manager: [chars] Explanation The socket library failed to create event manager. Recommended Action If the error message indicates low memory, do the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. For any other errors, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-SOCKET-7-NOFDREF NOFDREF flag on socket 0x[pointer] ([chars], owned by proc [dec]) is already set where we expect it is not set Explanation The socket library expect the NOFDREF flag to be not set and find it is already set. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. STANDBY Messages Error Message %IP-STANDBY-3-ERR_EDM_NOTIFY [chars]: Failed to generate [chars]: [chars] Explanation HSRP has failed to notify the system that the specified event has occurred. Recommended Action Restart the HSRP process. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-3-ERR_IM Failed to get [chars] type from Interface Manager: [chars] Explanation HSRP has failed to retrieve required information about the interface from the Interface Manager. Recommended Action Check to see if there are any other errors on the system which may indicate a general service-related problem and restart those services. If the problem is isolated then restart HSRP. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-3-ERR_INDEX Failed to obtain snmp index for [chars]: [chars] Explanation The HSRP process failed to obtain the snmp index for this interface. There may be a problem with the connection to certain IOSXR services. Recommended Action Retry the configuration on this interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-3-ERR_JOIN Failed to [chars] interface [chars] on Multicast group: [chars] Explanation The HSRP process failed to start/stop receiving HSRP packets on an interface correctly. This is an internal error. Recommended Action Retry the configuration on the interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-3-ERR_MAC Failed to add unicast MAC address on interface [chars]: [chars] Explanation HSRP has failed to assign a MAC address to the interface. Recommended Action Retry the configuration on the interface. If this still fails then do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-3-ERR_REGISTER Registration for [chars] failed: [chars] Explanation Registration for an IOSXR service failed during HSRP's operation. This may indicate a connection failure with the IOSXR service as indicated in the error message. Recommended Action Restart the HSRP process. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-4-WARN_DEBUG Outputting debug information failed: [chars] Explanation The HSRP process failed to output a debug message. This may not impact functionality but it does impair the debuggabilty of the VRRP process. And may indicate that there is a failure with the IOSXR debug infrastructure. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-4-WARN_INIT HSRP Initialization failed: [chars]: [chars] Explanation The HSRP process failed to initialize correctly. In this situation HSRP restarts, but HSRP may not recover if there is a persistant error in the IOSXR system and HSRP is later unable to reestablish its connections and initialize successfully. Recommended Action If HSRP does not restart and automatically recover, do the following. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %IP-STANDBY-6-INFO_HOLDTIME Holdtime ([dec]) is less than or equal to twice the hellotime ([dec]) Explanation The holdtime has been set to a value which is less than (or equal to) twice the hello time. This is not recommended as any lost packet may result in an unnecessary state change. Recommended Action Change the holdtime to be greater than twice the hellotime. Error Message %IP-STANDBY-6-INFO_REDIRECTS_DISABLED ICMP redirects may still be enabled on this interface Explanation Disabling HSRP filtered ICMP redirects when ICMP redirects are enabled may cause hosts to use real IP addresses as their default routes, and first hop redundancy may be lost. Recommended Action Ensure that ICMP redirects are disabled on this interface. Error Message %IP-STANDBY-6-INFO_REDIRECTS_SECONDARY ICMP redirects may be ignored by hosts if HSRP secondary addresses are used Explanation If a host uses HSRP secondary addresses, HSRP filtered ICMP redirects may be ignored by the host (depending on the host implementation). Recommended Action Try to avoid using HSRP secondary addresses when HSRP filtered ICMP redirects are enabled. Error Message %IP-STANDBY-6-INFO_STATECHANGE SB[dec]: [chars]: state [chars]011 - [chars] Explanation The HSRP router has changed state for the specified group and interface. Recommended Action No action is required.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks