Table Of Contents

Keychain Management Commands on Cisco IOS XRSoftware

accept-lifetime

accept-tolerance

cryptographic-algorithm

key (keychain)

key chain (key chain)

key-string (keychain)

send-lifetime

show key chain

Keychain Management Commands on Cisco IOS XRSoftware

---

This module describes the Cisco IOS XR software commands used to configure keychain management.

For detailed information about keychain management concepts, configuration tasks, and examples, see the Implementing Keychain Management on Cisco IOS XR Software configuration module.

accept-lifetime

To set the time period during which the authentication key on a keychain is received as valid, use the accept-lifetime command in key configuration mode. To revert to the default value, use the no form of this command

accept-lifetime start-time [duration duration value | infinite | end-time]

no accept-lifetime start-time [duration duration value | infinite | end-time]

Syntax Description

start-time	Start time, in hh:mm:ss day month year format, in which the key becomes valid. The range is from 0:0:0 to 23:59:59.
duration duration value	Determines the lifetime of the key in seconds. The range is from 1-2147483646.
infinite	Specifies that the key never expires after it becomes valid.
end-time	End time, in hh:mm:ss day month year format, after which the key expires. The range is from 0:0:0 to 23:59:59.

Defaults

No default behavior or values

Command Modes

Key configuration

Command History

Release	Modification
Release 3.3.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.
Release 3.4.0	No modification.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID	Operations
system	read, write

Examples

The following example shows how to use the accept-lifetime command:

RR/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# key chain isis-keys

RP/0/RP0/CPU0:router(config-isis-keys)# key 8

RP/0/RP0/CPU0:router(config-isis-keys-0x8)# accept-lifetime 1:00:00 June 29 2006 infinite

Related Commands

Command	Description
key (keychain)	Creates or modifies a keychain key.
key chain (key chain)	Creates or modifies a keychain.
key-string (keychain)	Specifies the text for the key string.
send-lifetime	Sends the valid key.
show key chain	Displays the keychain.

accept-tolerance

To specify the tolerance or acceptance limit, in seconds, for an accept key that is used by a peer, use the accept-tolerance command in keychain configuration mode. To disable this feature, use the no form of this command.

accept-tolerance [value | infinite]

no accept-tolerance [value | infinite]

Syntax Description

value	(Optional) Tolerance range, in seconds. The range is from 1 to 8640000.
infinite	(Optional) Specifies that the tolerance specification is infinite. The accept key never expires. The tolerance limit of infinite indicates that an accept key is always acceptable and validated when used by a peer.

Defaults

The default value is 0, which is no tolerance.

Command Modes

Keychain configuration

Command History

Release	Modification
Release 3.4.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

If you do not configure the accept-tolerance command, the tolerance value is set to zero.

Even though the key is outside the active lifetime, the key is deemed acceptable as long as it is within the tolerance limit (for example, either prior to the start of the lifetime, or after the end of the lifetime).

Task ID

Task ID	Operations
system	read, write

Examples

The following example shows how to use the accept-tolerance command:

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# key chain isis-keys

RP/0/RP0/CPU0:router(config-isis-keys)# accept-tolerance infinite

Related Commands

Command	Description
accept-lifetime	Accepts the valid key.
key chain (key chain)	Creates or modifies a keychain.
show key chain	Displays the keychain.

cryptographic-algorithm

To specify the choice of the cryptographic algorithm to be applied to the packets using the key string configured for the key ID, use the cryptographic-algorithm command in keychain-key configuration mode. To disable this feature, use the no form of this command.

cryptographic-algorithm [HMAC-MD5 | HMAC-SHA1-12 | HMAC-SHA1-20 | MD5 | SHA-1]

no cryptographic-algorithm [HMAC-MD5 | HMAC-SHA1-12 | HMAC-SHA1-20 | MD5 | SHA-1]

Syntax Description

HMAC-MD5	Configures HMAC-MD5 as a cryptographic algorithm with a digest size of 16 bytes.
HMAC-SHA1-12	Configures HMAC-SHA1-12 as a cryptographic algorithm with a digest size of 12 bytes.
HMAC-SHA1-20	Configures HMAC-SHA1-20 as a cryptographic algorithm with a digest size of 20 bytes.
MD5	Configures MD5 as a cryptographic algorithm with a digest size of 16 bytes.
SHA-1	Configures SHA-1-20 as a cryptographic algorithm with a digest size of 20 bytes.

Defaults

No default behavior or values

Command Modes

Keychain-key configuration

Command History

Release	Modification
Release 3.4.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

If you do not specify the cryptographic algorithm, MAC computation and API verification would be invalid.

Task ID

Task ID	Operations
system	read, write

Examples

The following example shows how to use the cryptographic-algorithm command:

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# key chain isis-keys

RP/0/RP0/CPU0:router(config-isis-keys)# key 8

RP/0/RP0/CPU0:router(config-isis-keys-0x8)# cryptographic-algorithm MD5

Related Commands

Command	Description
accept-lifetime	Accepts the valid key.
key chain (key chain)	Creates or modifies a keychain.
show key chain	Displays the keychain.

key (keychain)

To create or modify a keychain key, use the key command in keychain-key configuration mode. To disable this feature, use the no form of this command.

key key-id

no key key-id

Syntax Description

key-id

Key identifier. The range is from 0 to 2147483647.

Defaults

No default behavior or values

Command Modes

Keychain-key configuration

Command History

Release	Modification
Release 3.3.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.
Release 3.4.0	No modification.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID	Operations
system	read, write

Examples

The following example shows how to use the key command:

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# key chain isis-keys

RP/0/RP0/CPU0:router(config-isis-keys)# key 8

RP/0/RP0/CPU0:router(config-isis-keys-0x8)#

Related Commands

Command	Description
accept-lifetime	Accepts the valid key.
key chain (key chain)	Creates or modifies a keychain.
key-string (keychain)	Specifies the text for the key string.
send-lifetime	Sends the valid key.
show key chain	Displays the keychain.

key chain (key chain)

To create or modify a keychain, use the key chain command in global configuration mode. To disable this feature, use the no form of this command.

key chain key-chain-name

no key chain key-chain-name

Syntax Description

key-chain-name

Specifies the name of the keychain. The maximum number of characters is 48.

Defaults

No default behavior or values

Command Modes

Global configuration

Command History

Release	Modification
Release 3.3.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.
Release 3.4.0	No modification.
Release 3.4.1	The maximum number of characters allowed in the keychain name was changed from 32 to 48.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

You can configure a keychain for Border Gateway Protocol (BGP) as a neighbor, session-group, or neighbor-group. BGP can use the keychain to implement a hitless key rollover for authentication.

Task ID

Task ID	Operations
system	read, write

Examples

The following example shows that the name of the keychain isis-keys is for the key chain command:

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# key chain isis-keys

RP/0/RP0/CPU0:router(config-isis-keys)#

Related Commands

Command	Description
accept-lifetime	Accepts the valid key.
accept-tolerance	Configures a tolerance value to accept keys for the keychain.
key (keychain)	Creates or modifies a keychain key.
key-string (keychain)	Specifies the text for the key string.
send-lifetime	Sends the valid key.
show key chain	Displays the keychain.

key-string (keychain)

To specify the text string for the key, use the key-string command in keychain-key configuration mode. To disable this feature, use the no form of this command.

key-string [clear | password] key-string-text

no key-string [clear | password] key-string-text

Syntax Description

clear	Specifies the key string in clear text form.
password	Specifies the key in encrypted form.
key-string-text	Text string for the key and is encrypted by the parser process before it is saved to the configuration.

Defaults

The default value is clear.

Command Modes

Keychain-key configuration

Command History

Release	Modification
Release 3.3.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.
Release 3.4.0	No modification.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID	Operations
system	read, write

Examples

The following example shows how to use the key-string command:

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# key chain isis-keys

RP/0/RP0/CPU0:myhost(config-isis-keys)# key 8

RP/0/RP0/CPU0:myhost(config-isis-keys-0x8)# key-string password 8

Related Commands

Command	Description
accept-lifetime	Accepts the valid key.
key (keychain)	Creates or modifies a keychain key.
key chain (key chain)	Creates or modifies a keychain.
send-lifetime	Sends the valid key.
show key chain	Displays the keychain.

send-lifetime

To send the valid key and to authenticate information from the local host to the peer, use the send-lifetime command in keychain-key configuration mode. To disable this feature, use the no form of this command.

send-lifetime start-time [duration duration value | infinite | end-time]

no send-lifetime start-time [duration duration value | infinite | end-time]

Syntax Description

start-time	Start time, in hh:mm:ss day month year format, in which the key becomes valid. The range is from 0:0:0 to 23:59:59
duration duration value	Determines the lifetime of the key in seconds.
infinite	Specifies that the key never expires once it becomes valid.
end-time	Start time, in hh:mm:ss day month year format, after which the key expires. The range is from 0:0:0 to 23:59:59

Defaults

No default behavior or values

Command Modes

Keychain-key configuration

Command History

Release	Modification
Release 3.3.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.
Release 3.4.0	No modification.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID	Operations
system	read, write

Examples

The following example shows how to use the send-lifetime command:

RR/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# key chain isis-keys

RP/0/RP0/CPU0:router(config-isis-keys)# key 8

RP/0/RP0/CPU0:router(config-isis-keys-0x8)# send-lifetime 1:00:00 June 29 2006 infinite

Related Commands

Command	Description
accept-lifetime	Accepts the valid key.
key (keychain)	Creates or modifies a keychain key.
key chain (key chain)	Creates or modifies a keychain.
key-string (keychain)	Specifies the text for the key string.

show key chain

To display the keychain, use the show key chain command in EXEC mode.

show key chain key-chain-name

Syntax Description

key-chain-name

Names of the keys in the specified keychain. The maximum number of characters is 32.

Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release	Modification
Release 3.3.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.
Release 3.4.0	No modification.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID	Operations
system	read

Examples

When a secure key storage becomes available, it is desirable for keychain management to alternatively prompt you for a master password and display the key label after decryption. The following example displays only the encrypted key label for the show key chain command:

RP/0/RP0/CPU0:router# show key chain isis-keys

Key-chain: isis-keys/ -

accept-tolerance -- infinite

Key 8 -- text "8"

  cryptographic-algorithm -- MD5

  Send lifetime:   01:00:00, 29 Jun 2006 - Always valid  [Valid now]

  Accept lifetime: 01:00:00, 29 Jun 2006 - Always valid [Valid now]

Related Commands

Command	Description
accept-lifetime	Accepts the valid key.
accept-tolerance	Configures a tolerance value to accept keys for the keychain.
cryptographic-algorithm	Specifies the choice of the cryptographic algorithm.
key (keychain)	Creates or modifies a keychain key.
key chain (key chain)	Creates or modifies a keychain.
key-string (keychain)	Specifies the text for the key string.
send-lifetime	Sends the valid key.