Table Of Contents
A - B - C - D - E - F - G - H - I - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y -
Index
HC Cisco IOS XR Interface and Hardware Component Configuration Guide
IC Cisco IOS XR IP Addresses and Services Configuration Guide
MCC Cisco IOS XR Multicast Configuration Guide
MNC Cisco IOS XR System Monitoring Configuration Guide
MPC Cisco IOS XR MPLS Configuration Guide
QC Cisco IOS XR Modular Quality of Service Configuration Guide
RC Cisco IOS XR Routing Configuration Guide
SBC Cisco IOS XR Session Border Controller Configuration Guide
SC Cisco IOS XR System Security Configuration Guide
SMC Cisco IOS XR System Management Configuration Guide
A
AAA (authentication, authorization, and accounting)
accounting method lists, configuring SC-201
accounting services, enabling SC-208
authentication SC-167
authentication method lists, configuring SC-196
authorization, enabling SC-207
authorization method lists, configuring SC-198
configuration SC-166
database SC-165
interim accounting records, procedure SC-205
login parameters, configuring SC-211
per VRF (VPN routing and forwarding) SC-187
RADIUS server groups, configuring SC-192
remote configuration SC-165
router to RADIUS server communication, configuring SC-181
services, configuration (examples) SC-212
TACACS+ server, configuring SC-189
TACACS+ server groups, configuring SC-194
task-based authorization
task groups SC-163
task IDs SC-169
task groups
configuration SC-175
user and group attributes SC-161
user groups
configuring SC-177
definition SC-163
inheritance SC-163
predefined SC-163
prerequisites SC-160
privilege level mapping SC-172
restrictions SC-161
users, configuring SC-179
XML schema SC-173
aaa accounting command SC-205
aaa accounting update command SC-205
accept-lifetime command SC-75
accept-tolerance command SC-70
access control IC-15
access-group command SMC-97
access groups IC-15
access lists
inbound or outbound interfaces, applying on IC-14
undefined IC-15
virtual terminal lines, setting on IC-14
access-lists
RSVP prefix filtering MPC-133
account command SBC-7, SBC-9, SBC-10, SBC-13, SBC-14, SBC-15
accounting records, interim
aaa accounting command SC-205
aaa accounting update command SC-205
procedure SC-205
ACK objects MPC-132
ACL-based prefix filtering
RSVP MPC-133
ACL match
implicit deny MPC-143
ACLs
extended access-lists MPC-133
action command
logging keyword MNC-124
trigger keyword MNC-124
activate command SBC-4, SBC-5, SBC-12
active targeted hellos
configuration prerequisites MPC-15
Add Drop Multiplexer
See ADM
address conflict resolution IC-155
address-family (BGP) MPC-233, MPC-237
address-family (BGP) command MPC-230
address family command RC-7, RC-138
address-family command (IS-IS) RC-152
address-family ipv4 command RC-118, SBC-21
for BFD HC-311
router pim MCC-28
Address Repository Manager IC-155
adjacencies
about implementing SBC-2
defined SBC-1
detail SBC-1
H.323
configuration examples SBC-18, SBC-19
configuring SBC-7
how they affect media routing SBC-6
overview SBC-3
properties common to SIP and H.323 SBC-3
related commands SBC-23
SIP
configuration examples SBC-21
configuring SBC-12
adjacencies, tuning RC-165
adjacency h323 command SBC-6, SBC-3, SBC-8, SBC-10, SBC-12
adjacency sip command SBC-5, SBC-8, SBC-5, SBC-12, SBC-13, SBC-15, SBC-16, SBC-17
O-UNI client device MPC-172
with O-UNI MPC-172
admin-config-pairing submode
location command SMC-142
See pairing command
admin-config-sdr submode
location command SMC-141, SMC-143, SMC-144, SMC-145, SMC-146, SMC-147, SMC-149, SMC-151, SMC-153, SMC-155
See sdr command
admin-config submode
sdr command SMC-142, SMC-146, SMC-156
See admin configure command
admin configure command SMC-142, SMC-145, SMC-149, SMC-150, SMC-152, SMC-154, SMC-156, SMC-158, SMC-161
administrative distance RC-279
administrative distance, static routes RC-351
advertisement-interval command RC-68
advertistement, label MPC-9
ageout command
ICMP Echo operation MNC-79
ICMP Path Echo operation MNC-86
ICMP Path Jitter operation MNC-94
UDP Echo operation MNC-72
UDP Jitter operation MNC-64
aggregatable global address IC-143
aggregatable global address format, figure IC-143
aggregate-address command MPC-237, RC-55
ais-shut command HC-11
alarms
bi-state alarms MNC-26
capacity threshold setting MNC-26
severity level and filtering MNC-25
ALDEMS (Alarm Management and Debugging Event System), description MNC-22
algorithms
See IKE, algorithms
allowas-in command MPC-237
antireplay window (IPSec)
checking crypto profile SC-108
crypto ipsec profile command SC-108
crypto ipsec security-association replay disable command SC-107
crypto ipsec security-association replay window-size command SC-107
expanding and disabling globally procedure SC-107
overview SC-90
apply command RC-309
aps group command HC-10
aps submode
channel command HC-10
interface loopback command HC-10
See aps group command
archiving messages MNC-134, MNC-155, MNC-159
Area Border Routers (ABRs) RC-191
area command MPC-57, MPC-77, RC-205
area command (BFD) HC-309
ARM (Address Repository Manager) IC-155
assigning IPv6 addresses to individual router interfaces, task IC-159
asynchronous operation, install command SMC-15
Asynchronous Transfer Mode MPC-50
Asynchronous Transfer Mode (ATM)
MPLS L2VPN MPC-188
atm address-registration command HC-223
atm ilmi-config disable command HC-225
atm ilmi-keepalive command
on ATM interfaces HC-223
ATM interface
ATM overview HC-182
attaching a vc-class HC-218, HC-219, HC-221
configuring an IP address and subnet mask HC-200
configuring a PVC HC-193
configuring a vc-class HC-214, HC-215, HC-229
configuring a vp-tunnel HC-196, HC-199
configuring OAM AIS/RDI HC-215
configuring OAM F5 loopback HC-215
configuring OAM management HC-215
configuring optional parameters HC-226
configuring traffic shaping HC-198, HC-216
creating an interface HC-192, HC-203, HC-204, HC-206, HC-210
creating a PVC HC-192, HC-200, HC-206, HC-211
creating a subinterface HC-192, HC-203, HC-204, HC-206, HC-210
creating a vp-tunnel HC-197
creating subinterfaces with PVCs HC-191
disable the passing of OAM packets HC-197
displaying vp-tunnel information HC-199, HC-201
enabling address registration and callback functions HC-223
F4 OAM
overview HC-184
ILMI
overview HC-184
optional parameters
configuring HC-188
prerequisites HC-182
VC class-mapping
overview HC-183
verifying connectivity HC-201
verifying ILMI configuration HC-224, HC-225
vp-tunnel
configuring HC-228
vp-tunnels
overview HC-184
attach command SBC-7, SBC-9, SBC-13, SBC-14, SBC-16
attach-controllers command SBC-12
attached bit on an IS-IS instance RC-143
authenticate command SMC-98
authentication
MD5 (OSPFv2) RC-193
route, key rollover (OSPFv2) RC-193
strategies RC-193
authentication, configuring (OSPFv2) RC-213
authentication command (OSPFv2) RC-214
authentication-key command SMC-98
authentication message-digest command RC-220
autodiscovery SBC-4
automatic route distinguisher
MPLS Layer 3 VPN MPC-215
autonomous system MPC-216
Autonomous System Boundary Routers (ASBRs) RC-192
autonomous systems RC-190
autoroute announce command MPC-63
auto-rp candidate-rp command MCC-24
auto-rp mapping-agent command MCC-24
auto-summary command RC-264
averaged threshold violation MNC-117
B
backbone area RC-191
backup-bw command MPC-65
backup disk
boot device SMC-60
backup-path command MPC-65
bandwidth MPC-47
configuring
control channel MPC-138
data channel MPC-138
bandwidth command MPC-58, MPC-68, MPC-70, MPC-73, MPC-82, MPC-95, MPC-139, QC-47
bandwidth constraint models
bandwidth pools MPC-47
overview MPC-47
RDM and MAM MPC-47
bandwidth-percent command RC-119
bandwidth remaining command QC-47, QC-70
basic IPv6 packet header fields IC-148
benefits, IP SLA MNC-54
bert pattern command HC-57, HC-60
bestpath algorithm RC-26
BFD
BFD configuration mode HC-312, HC-314
configuring fast-detection HC-309
counters
clearing HC-314
displaying HC-314
disabling echo mode HC-313, HC-314
echo mode
enabling between a local device and a peer HC-307
enabling fast-detection HC-311
enabling on a neighbor HC-305
enabling on an interface HC-308
enabling on a static route HC-310
examples HC-316
in BGP configuration mode HC-306
in OSPF configuration mode HC-308
on VLAN bundles HC-304
overview HC-303
packet formats HC-304
prerequisites HC-302
setting the BFD multiplier HC-306
setting the minimum interval HC-306, HC-308
setting the multiplier HC-309
specifying a VPN VRF instance HC-311
static routes
configuring HC-310
bfd fast-detect command HC-307, HC-309
bfd minimum-interval command HC-306, HC-308
bfd multiplier command HC-306, HC-309
BGP SBC-6
confederations MPC-217
distributing routes MPC-226
messages and MPLS labels MPC-225
routing information MPC-225
BGP (Border Gateway Protocol)
bestpath algorithm RC-26
configuration
grouping RC-8
inheriting RC-10
description RC-1
functional overview RC-3
inheritance, monitoring RC-14
multiprotocol RC-30
neighbors, maximum limits on RC-4
policy attach points
dampening RC-312
default originate RC-312
neighbor export RC-313
neighbor import RC-313
network RC-314
redistribute RC-314
show bgp RC-314
table policy RC-316
policy attach points, aggregation RC-311
router identifier
router identifier RC-3
routing policy
enforcing RC-18
update groups
description RC-21
example RC-100
bgp bestpath as-path ignore command RC-51
bgp bestpath compare-routerid command RC-52
bgp bestpath med always command RC-51
bgp bestpath med confed command RC-51
bgp bestpath med missing-as-worst command RC-51
bgp confederation identifier command RC-43
bgp confederation peers command RC-44
BGP cost community RC-21
bgp dampening command RC-61
bgp default local-preference command RC-47
bgp global address family submode RC-7
aggregate-address command RC-55
bgp dampening command RC-61
distance bgp command RC-66
network command RC-53
redistribute command MPC-237, MPC-239, RC-58
See address family command
table-policy command RC-65
bgp neighbor address family submode RC-7, RC-138
next-hop self command RC-79
route-policy (BGP) command RC-76
route-policy command RC-42
route-reflector-client command RC-74
See neighbor address family command
send-community-ebgp command RC-81
soft-reconfiguration inbound always command RC-87
weight command RC-50
bgp neighbor command RC-8
bgp neighbor group submode RC-9, RC-68
advertisement-interval command RC-68
description command RC-68
dmz-link-bandwidth command RC-68
ebgp-multihop command RC-68
local-as command RC-68
password accept command RC-69
password-disable command RC-69
receive-buffer-size command RC-69
See neighbor group command
See neighbor-group command
send-buffer-size command RC-69
timers command RC-69
ttl-security command RC-69
update-source command RC-69
bgp neighbor submode RC-7, RC-8, RC-138
See bgp neighbor command
shutdown command RC-91
use command RC-70
bgp redistribute-internal command RC-56
bgp router submode RC-7, RC-138
bgp bestpath as-path ignore command RC-51
bgp bestpath compare-routerid command RC-52
bgp bestpath med always command RC-51
bgp bestpath med confed command RC-51
bgp bestpath med missing-as-worst command RC-51
bgp confederation identifier command RC-43
bgp confederation peers command RC-44
bgp default local-preference command RC-47
bgp redistribute-internal command RC-56
default-metric command RC-48
See router bgp command
timers bgp command RC-45
bgp session group submode RC-9
BGP update groups example RC-100
bgp VRF address family submode RC-7
bgp VRF neighbor address family submode RC-8
bgp VRF neighbor submode RC-8
bgp VRF submode RC-7
billing
call detail record SBC-7
audit log format SBC-13
CDR format SBC-7
XML elements 1
XML hierarchy 1
XML record analysis 1
file access SBC-15
LDR format SBC-12
media requirements SBC-15
partial call format SBC-12
XML DTD SBC-14
event messages SBC-4
multiple server support SBC-4
out-of-band event messages SBC-6
resending SBC-5
unsupported messages SBC-6
events messages
batching SBC-5
integrated systems SBC-2
overview SBC-4
standalone systems SBC-1
billing, administering SBC-15
billing, fault tolerance SBC-18
cold failover SBC-18
warm failover SBC-18
billing, security SBC-19
boot device, determining SMC-60
boot service card SBC-3
border control model
configuring MPC-100
overview MPC-100
border gateway protocol SBC-6
broadcast client command SMC-94
broadcast command SMC-95
broadcastdelay command SMC-94
broadcast-for-v2 command RC-262
BSR (Bootstrap Router)
See multicast routing, BSR
bsr border command MCC-25
bsr candidate-bsr command MCC-25
bsr candidate-rp command MCC-25
buckets command MNC-67
bundle command HC-343
Bundle-Ether command HC-248
bundle id command HC-248
bundle-POS HC-251, HC-252, HC-258, HC-262
bundle-id command
C
cablelength command HC-35, HC-40, HC-43, HC-45, HC-51
CAC (call admission control)
IKE SA configuration SC-42
IKE session SC-29
overview SC-29
security association (SA) SC-29
cache entries command HC-379
cache permanent command HC-380
cache-sa-state command MCC-34
cache timeout command HC-380
cac-policy-set command SBC-9
cac-table command SBC-9
call
incoming SBC-4
logging SBC-4
caller-video-qos-profile command SBC-10, SBC-11
caller-voice-qos-profile command SBC-10
capability command MPC-83
cards
CSC, removing and replacing SMC-212
CSFC, removing and replacing SMC-217
MSC removal SMC-193
PLIM removal SMC-193
PRP
hardware requirements SMC-218
software requirements SMC-218
standby, adding SMC-217
SFC, removing and replacing SMC-212
card type
changing to E3 mode HC-37
changing to T3 mode HC-37
CAs (certification authorities)
authenticating SC-10
declaring SC-8
domain names, configuring (example) SC-6
host names SC-6
manual enrollment, how to cut-and-paste SC-12
RSA (Rivest, Shamir, and Adelman) key pairs
generating SC-7
supported standards SC-2
trusted point, configuring SC-8
See also certificates; CRLs; IPSec; RAs
CDP
functional overview SMC-224
modifying default settings SMC-227, SMC-231
monitoring SMC-229
cdp (global) command SMC-226
cdp (interface) command SMC-226
cdp advertise v1 command SMC-227
cdp holdtime command SMC-227
cdp timer command SMC-228
CDR.See billing
CEF (Cisco Express Forwarding). See Cisco Express Forwarding
cef accounting command IC-56
cef purge delay command IC-66
certificates SC-3
requests SC-11
See also CAs; CRLs; RSA keys
channel command HC-10
channel-group command HC-47, HC-342
CHAP (Challenge Handshake Authentication Protocol), and PPP HC-110, HC-160
CHAP authentication HC-321, HC-322, HC-323, HC-324, HC-327, HC-328, HC-337
circuit-type command RC-152
Cisco Dynamic Packet Transport (DPT) HC-131
Cisco Express Forwarding IC-51
benefits IC-53
BGP policy accounting BGP policy accounting. See Cisco Express Forwarding
bgp policy accounting command IC-64
cef accounting command IC-56
cef purge delay command IC-66
description IC-51
features IC-52
Forwarding Information Base IC-53
interface command IC-63
nonrecursive forwarding IC-53
reverse path forwarding IC-55
route policy command IC-61
route processor management ethernet forwarding IC-55
router bgp address family command IC-62
router bgp command IC-62
router bgp table policy command IC-62
verify unicast source reachable-via command IC-68
Cisco inetd. See host services and applications
Cisco IOS XR Software Selector tool SMC-19
class-based packet marking, configuring QC-24
Class D IP addresses MCC-5
classification
defined QC-9
methods QC-9
QoS group QC-14
See class-based packet marking
See IP precedence
set cos command QC-14
set qos-group command QC-14
summary QC-2
class-int command
on ATM interfaces HC-218
on ATM subinterfaces HC-219
class-map command HC-142, QC-17
class map submode
match access-group command QC-17
match discard-class command QC-18
match dscp command QC-18
match mpls experimental topmost command HC-142
match precedence command HC-142, QC-18
match protocol command QC-18
match qos-group command QC-18
class-vc command
on ATM PVCs HC-221
clear bfd counters packet command HC-315
clear bgp flap-statistics command RC-62
clear bgp flap-statistics reexp command RC-62
clear bgp flap-statistics route-policy command RC-63
clear bgp soft in command RC-92
clear bgp soft out command RC-93
clear eigrp neighbors command RC-129
clear eigrp topology command RC-129
clear flow exporter command HC-383
clear flow monitor command HC-383
clear logging correlator delete all-in-buffer command MNC-34
clear logging correlator delete command MNC-33
clear logging delete command MNC-33
clear logging events delete first command MNC-42
clear logging events delete group command MNC-42
clear logging events delete last command MNC-42
clear logging events delete location command MNC-42
clear logging events delete message command MNC-42
clear logging events delete timestamp-lo-limit command MNC-42
clear logging events reset all-in-buffer command MNC-43
clear ospf command RC-249
clear ospfv3 command RC-249
clear pim bsr command MCC-26
clock and scheduler card See CSC
clock set command SC-217
clock source command HC-6, HC-12, HC-35, HC-36, HC-40, HC-42, HC-45, HC-47, HC-51, HC-137, HC-341
codec SBC-4
code point marking SBC-5
command MCC-28, SBC-5, SBC-6, SBC-8, SBC-9, SBC-10, SBC-12, SBC-14, SBC-15
command summary
FPD commands (table) HC-389
commit command HC-135
committing packages SMC-39
config-isakmp command mode, enabling SC-32
config-register command SMC-191
configuration examples
building MPLS-TE topology and tunnels MPC-116
fast reroute and SONET APS MPC-116
LDP
advertisement MPC-38
discovery MPC-37
discovery for targeted hellos MPC-38
forwarding MPC-39
IGP synchronization MPC-40
inbound label filtering MPC-39
link MPC-37
local label allocation control MPC-39
neighbors MPC-38
non-stop forwarding with graceful restart MPC-39
session protection MPC-40
with graceful restart MPC-37
MPLS L2VPN MPC-206
O-UNI
connection establishment MPC-183
connection tear-down MPC-184
neighbor and data link MPC-182
RSVP
ACL-based prefix filtering MPC-167
bandwidth (MAM) MPC-165
bandwidth (Prestandard) MPC-165
bandwidth (RDM) MPC-165
DSCP MPC-167
graceful restart MPC-166
configuration requirements SBC-3
configuration tasks
configuring an MPLS traffic engineering interarea tunnel MPC-109
configure
MPLS L2VPN MPC-195
configure command HC-134
configuring
OSPFv3
graceful restart RC-236
configuring a CSC-CE Link MPC-267
configuring a CSC-PE Link MPC-263
configuring a static router to a peer MPC-269
configuring ICMP rate limiting, task IC-167
configuring IPv4 and IPv6 protocol stacks, task IC-164
configuring L2VPN quality of service
port mode
MPLS L2VPN MPC-203
VLAN mode
MPLS L2VPN MPC-204
configuring router IDs MPC-75
configuring static point-to-point xconnects
MPLS L2VPN MPC-195
configuring VRFs for CSC-PE routers MPC-263
conform-action command QC-56
congestion avoidance
defined QC-63
summary QC-3
congestion management
summary QC-3
connect-source command MCC-31
consecutive threshold violation MNC-117
consolidated switch fabric cards See CSFC
control-address h248 ipv4 command SBC-11
controller e1 command HC-59
controller fabric plane command SMC-197, SMC-206
controller h248 command SBC-11
controller mgmtmultilink command
Multilink controller HC-342
controllers command SMC-192
controller sonet command
FRR and SONET APS HC-13
SONET APS HC-11
SONET controller HC-5, HC-137, HC-341
controller t1 command HC-47, HC-59, HC-341
controller t3 command HC-39, HC-42, HC-45, HC-51, HC-57
control messages
with LDP MPC-3
control packets HC-132
control plane failure MPC-6
control protocol, IP SLA MNC-56
copy ftp command SMC-21
copy rcp command SMC-21
copy tftp command SMC-20
CoS (Class of Service), defining classes QC-14
cost community, BGP RC-21
CPU controller bits SMC-219
crc command
on POS interfaces HC-113
on serial interfaces HC-162, HC-168
cryptographic-algorithm command SC-77
crypto ipsec df-bit command SC-105
crypto ipsec pmtu command SC-130
crypto ipsec pre-fragmentation command SC-115
crypto ipsec profile command SC-108
crypto ipsec security-association idle-time command SC-112
crypto ipsec security-association replay disable command SC-107
crypto ipsec security-association replay window-size command SC-107
crypto ipsec transform-set command SC-99
crypto keyrings
configuration SC-46
guidelines and restrictions SC-46
crypto nat-transparency command SC-110
CSC (Carrier Supporting Carrier)
configuration examples MPC-269
configuration options for backbone and customer carriers MPC-227
configuring a CSC-PE link MPC-263
configuring a static route to a peer MPC-269
customer carrier network options MPC-227
topology MPC-262
CSC card, removing and replacing SMC-212
CSFC card, removing and replacing SMC-217
csnp-interval command RC-156
customer edge router
MPLS Layer 3 VPN MPC-211
customer router
MPLS Layer 3 VPN MPC-211
D
dampening, route RC-32
data border element. See DBE
datasize request command
ICMP Echo operation MNC-82
ICMP Path Echo operation MNC-89
ICMP Path Jitter operation MNC-97
UDP Echo operation MNC-75
UDP Jitter operation MNC-67
DBE
relationship with other network elements SBC-2
dead interval command RC-210
dead-server detection
RADIUS SC-185
radius-server dead-criteria time command SC-186
radius-server dead-criteria tries command SC-186
radius-server deadtime command SC-185
deadtime command SC-193
debug chdlc slarp packet command
on POS interfaces HC-109
default address family RC-18
default-cost command RC-207
default-information originate command RC-171
default-metric command RC-48, RC-118
default-peer command MCC-31
default settings
flow control
Management Ethernet HC-287
mac-address (Management Ethernet) HC-287
speed (Management Ethernet) HC-287
Default Software Profile SMC-135
default traffic class
summary QC-10
tail drop QC-11
delay trigger command
FRR and SONET APS HC-14
on the SONET controller HC-6
deployment models
distributed SBC-1
unified SBC-1
DES (Data Encryption Standard)
definition SC-21
IKE policy parameter SC-23
description command RC-68
destination address command MPC-175
ICMP Echo operation MNC-79
ICMP Path Echo operation MNC-86
ICMP Path Jitter operation MNC-93
UDP Echo operation MNC-71
UDP Jitter operation MNC-63
destination command HC-375, MPC-61, MPC-65, MPC-95, MPC-97, MPC-101
destination port command
UDP Echo operation MNC-72
UDP Jitter operation MNC-63
DF (Don't Fragment) bit override
crypto ipsec df-bit command SC-105
overview SC-89
procedure SC-105
differentiated service model, classification QC-15
differentiated services
QOS MCC-13
differentiated services code point marking SBC-5
Differentiated Services Traffic-Engineering MPC-46
bandwidth constraints MPC-46
overview MPC-46
Diff-Serv
Russian Doll Model (RDM) and Maximum Allocation Model (MAM) MPC-46
diffServ TE bandwidth, configuring MPC-139
direction command MPC-95, MPC-101
discovery command MPC-12
discovery targeted-hello command MPC-17
discovery transport-address command MPC-21
disk0 SMC-8
distance bgp command RC-66
distance command RC-118, RC-172
distribution count command MNC-67
distribution interval command MNC-67
dmz-link-bandwidth command RC-68
domain command IC-104
domain name command IC-104
domain names
certification authority interoperability, configuring SC-6
domain name-server command IC-104
domain services. See host services and applications
dot1q native vlan command HC-98
dot1q vlan command HC-96, HC-100
DPD (Dead Peer Detection)
message configuration SC-52
periodic message SC-29
DR (Designated Router)
See multicast routing, DR
Draft-ietf-idr-bgp4-24.txt, BGP RC-103
Draft-ietf-idr-bgp4-mib-15.txt, BGP RC-103
draft-ietf-idr-cease-subcode-05.txt RC-103
Draft-ietf-isis-igp-p2p-over-lan-05.txt, Point-to-point operation over LAN RC-182
Draft-ietf-isis-ipv6-05.txt, Routing IPv6 with IS-IS RC-182
Draft-ietf-isis-restart-04.txt, Restart Signalling for IS-IS RC-182
Draft-ietf-isis-traffic-05.txt, IS-IS Extensions for Traffic Engineering RC-182
Draft-ietf-isis-wg-multi-topology-06.txt, M-ISIS
Multi Topology (MT) Routing in IS-IS RC-182
drives, formatting SMC-192
DSC
DSCP SBC-5
dscp command HC-375
ds-te mode ietf command MPC-71, MPC-73
ds-te model mam command MPC-73
DS-TE modes
Prestandard and IETF MPC-138
DTMF, interworking
overview SBC-5
dtmf-relay command SBC-7
dual tone multifrequency SBC-5
duplex command HC-292
duplex full command HC-81
duplex half command HC-81
E
E1 controller
default configuration values HC-35, HC-36
setting the clock source HC-36
setting the frame type HC-36
using the clock source command HC-36
using the controller e1 command HC-59
using the framing command HC-36, HC-53
using the national bits command HC-36, HC-53, HC-55
E3 controller
configuration prerequisites HC-34
configuring HC-41
configuring clear channel serial HC-42
configuring clocking HC-35
configuring the frame type HC-35
configuring the national reserved bits HC-35
E3 configuration mode HC-42
setting the cable length HC-35
setting the card type HC-37
using the cablelength command HC-35
using the clock source command HC-35
using the framing command HC-35
using the hw-module subslot cardtype command HC-37, HC-38
using the mode command HC-42
using the national bits command HC-35, HC-43
using the show controllers command HC-43
E3 mode
changing to T3 mode HC-37
eBGP MPC-210
ebgp-multihop command MPC-237, RC-68
echo disable command HC-313, HC-314
EIGRP (Enhanced Interior Gateway Routing Protocol)
features RC-107
hello interval and hold time RC-114
overview RC-107
restrictions RC-126
routing policy options RC-115
split horizon RC-113
stub routing RC-114
enabling the forwarding of IPv6 traffic globally on a router, task IC-159
encap command (Frame Relay) HC-354, HC-358
encapsulation command
on ATM vc-classes HC-215
on POS interfaces HC-113, HC-117, HC-344
on serial interfaces HC-162, HC-168
encapsulation frame relay command HC-354
encoding command MPC-83
encrypted nonces
See RSA encrypted nonces
encryption algorithm
See IKE, algorithms
end command HC-135
end-policy command RC-40
end-time, key chain SC-68
end-to-end configuration example
detail SBC-1
overview SBC-6
end-to-end recovery MPC-52
entry command SBC-10
error messages
levels MNC-136
logging keywords
(table) MNC-136
Ethernet interface
configuring an attachment circuit HC-84
configuring flow control HC-70
configuring MAC accounting HC-70, HC-83
configuring the IP address and subnet mask HC-77
configuring the MAC address HC-70, HC-78
configuring the MTU HC-70, HC-78
default settings
flow control HC-70
MAC accounting HC-70
MAC address HC-70
mtu HC-70
displaying Ethernet interfaces HC-79
displaying MAC accounting statistics HC-84
enabling flow-control HC-78
enabling Layer 2 transport mode HC-85
Gigabit Ethernet standards HC-72
IEEE 802.3ab 1000BASE-T Gigabit Ethernet HC-72
IEEE 802.3ae 10 Gbps Ethernet HC-72
IEEE 802.3 Physical Ethernet Infrastructure HC-72
IEEE 802.3z 1000 Mbps Gigabit Ethernet HC-72
Layer 2 VPN
configuring Layer 2 protocol tunneling and data units HC-85
overview HC-71
preparing a port for Layer 2 VPN HC-84
VLAN support HC-94
using the flow-control command HC-70, HC-78
using the interface command HC-77
using the ipv4 address command HC-77
using the l2protocol command HC-85
using the l2transport command HC-85
using the mac-accounting command HC-70
using the mac address command HC-70, HC-78
using the mtu command HC-70, HC-78
using the negotiation auto command HC-78
using the no shutdown command HC-78
VLANs
802.1Q frames tagging HC-93
assigning a VLAN AC HC-96
configuring a Layer 2 VPN attachment circuit HC-99
configuring an attachment circuit HC-100
configuring Layer 2 VPN HC-101
configuring native VLAN HC-98
configuring subinterfaces HC-95
configuring the native VLAN HC-98
displaying VLAN interfaces HC-97
displaying VLAN trunks HC-97
MTU inheritance HC-93
native VLAN description HC-93
overview HC-92
removing a subinterface HC-102
subinterface overview HC-93
using the dot1q native vlan command HC-98
using the dot1q vlan command HC-96
using the interface command HC-98
using the l2protocol command HC-101
using the show vlan interfaces command HC-97
using the show VLAN trunks command HC-97
Ethernet interfaces
using the mac accounting command HC-83
ethernet over MPLS, on the Cisco CRS-1 MPC-189
ethernet port mode MPC-189
event logging SBC-4
exceed-action command QC-51, QC-56
clear bgp flap statistics command RC-62
clear bgp flap statistics reexp command RC-62
clear bgp flap statistics route-policy command RC-63
clear bgp soft in command RC-92
clear bgp soft out command RC-93
clear eigrp neighbors command RC-129
clear eigrp topology command RC-129
clear ospf command RC-249
clear ospfv3 command RC-249
show bgp af-group command RC-15, RC-16
show bgp cidr-only command RC-95, RC-96
show bgp community command RC-95, RC-96, RC-97
show bgp count-only command RC-96
show bgp flap-statistics command RC-61
show bgp flap statistics reexp command RC-61
show bgp flap statistics route-policy command RC-62
show bgp inheritance command RC-14
show bgp neighbor command RC-14
show bgp neighbor-group command RC-17, RC-96
show bgp neighbors command RC-95
show bgp paths command RC-95
show bgp reexp command RC-95
show bgp summary command RC-96
show eigrp accounting command RC-129
show eigrp interfaces command RC-129
show eigrp neighbors command RC-127
show eigrp topology command RC-130
show eigrp traffic command RC-130
show isis command RC-148
show isis database command RC-157
show isis database-log command RC-157
show isis interface command RC-168
show isis lsp-log command RC-157
show isis mpls command RC-164
show isis mpls traffic-eng adjacency-log command RC-164
show isis mpls traffic-eng advertisements command RC-164
show isis neighbors command RC-168
show isis spf-log command RC-170
show isis topology command RC-153
show protocols eigrp command RC-130
show running-config command RC-159
exit command HC-142, HC-143, MPC-175
explicit-null command MPC-24
exporter command HC-380
exporter map HC-370
export route-policy command MPC-233
extended access-lists MPC-133
extended networks, using IP secondary addresses IC-162
extensions
MPLS TE MPC-45
F
f4oam disable command
on ATM interfaces HC-197
fail-over
MPLS L2VPN MPC-194
failover HC-248
failure recovery, graceful restart MPC-7
Fast Ethernet interface
configuring duplex operation HC-70, HC-81
configuring interface speed HC-81
configuring MAC accounting HC-70
configuring the IP address and subnet mask HC-80
configuring the MTU HC-71, HC-81
default settings
autonegotiation HC-71
duplex operation HC-70
interface speed HC-71
MAC accounting HC-70
mtu HC-71
enabling and disabling autonegotiation HC-71
enabling autonegotiation HC-81
negotiation auto command HC-71
removing the shutdown configuration HC-81
using the duplex command HC-81
using the interface command HC-80
using the ipv4 address command HC-80
using the mac-accounting command HC-70
using the mtu command HC-71, HC-81
using the negotiation auto command HC-81
using the no shutdown command HC-81
using the speed command HC-71, HC-81
fast-register disable command SBC-13, SBC-15
fast reroute
See FRR
fast-reroute command MPC-65
fault manager environment command MNC-11, MNC-12
fault manager policy command MNC-13, MNC-16
fault tolerance SBC-5
FCC serial number
displaying with CLI SMC-176
fdl HC-36
fdl ansi HC-36
fdl ansi command HC-36, HC-47, HC-49
FIB (Forwarding Information Base). See Cisco Express Forwarding
field programmable device (FPD) images SMC-36
field programmable devices
field-programmable gate array
file storage
flash disk0 SMC-8
File Transfer Protocol (FTP) SMC-20
file transfer services. See host services and applications
filtering routes by a prefix list IC-10
firewall traversal
overview SBC-5
firewall upgrades SBC-5
first-cac-table command SBC-9
flash disk
disk0 SMC-8
flooding MPC-48
thresholds MPC-48
triggers MPC-48
flow command HC-382
flow-control command HC-70, HC-78
flow exporter-map command HC-374
flow exporter map configuration submode HC-371
flow exporter map version configuration submode HC-372
flow monitor-map command HC-374, HC-379
flow monitor map configuration submode HC-372
format command SMC-192
formatting drives SMC-192
forwarding adjacency RC-145
forwarding-adjacency command MPC-114
Forwarding Information Base. See Cisco Express Forwarding
FPD images SMC-36
displaying default information HC-390
displaying minimum and current versions HC-390
overview for SPAs HC-388
troubleshooting upgradesHC-396to HC-397
upgrading HC-390
verifying successful upgrade HC-391
FPGA
description HC-387
devices, methods of upgrading HC-388
Frame Relay
configuration examples HC-360
configuring PVC encapsulation HC-358
configuring support type HC-354
configuring the support type HC-357
default settings HC-354
LMI
disabling HC-355, HC-358, HC-359
enabling HC-355
overview HC-355
polling HC-356
modifying the default configuration HC-356, HC-357
on POS interfaces HC-107
on PVCs HC-354
on serial interfaces HC-161
overview HC-354
prerequisites HC-353
frame relay
MPLS L2VPN MPC-188
frame-relay intf-type command HC-354, HC-357
frame-relay intf-type dce command HC-355
frame-relay intf-type dte command HC-355
frame-relay lmi command HC-355
frame-relay lmi disable command HC-359
frame-relay lmi-t391dte command HC-356
frame-relay lmi-type command HC-355, HC-358
framing command HC-6, HC-35, HC-36, HC-40, HC-43, HC-45, HC-47, HC-49, HC-51, HC-53
frequency (IP SLA) command
ICMP Echo operation MNC-79
ICMP Path Echo operation MNC-86
ICMP Path Jitter operation MNC-93
UDP Echo operation MNC-72
UDP Jitter operation MNC-64
FRR
with MPLS TE MPC-49
FTP SMC-20
ftp client anonymous-password command IC-108
ftp client passive command IC-108
ftp client-source interface command IC-109
G
Generalized Multiprotocol Label Switching
See GMPLS
get-next-request SMC-239
get-request SMC-239
get-response SMC-239
signaling-peer SBC-5, SBC-6, SBC-8, SBC-9, SBC-10, SBC-12, SBC-14, SBC-15
glossary
detail SBC-1
GMPLS
benefits MPC-50
configuring MPC-75
overview MPC-50
prerequisites MPC-52
protection and restoration MPC-51
See Generalized Multiprotocol Label Switching
support MPC-51
traffic engineering protocols MPC-50
graceful restart RC-236
failure recovery MPC-7
mechanism MPC-7
phases MPC-7
RSVP MPC-131
session parameters MPC-6
graceful-restart command MPC-26
graceful-restart forwarding-state-holdtime command MPC-26
graceful-restart helper command RC-200
graceful-restart interval command RC-199
graceful-restart lifetime command RC-200
graceful-restart reconnect-timeout command MPC-26
H
H.323 adjacencies
common properties with SIP SBC-3
configuration examples SBC-18, SBC-19
configuring SBC-7
overview SBC-4
related commands SBC-23
hardware
displaying status SMC-167
hash algorithm
See IKE, algorithms
HDLC
on POS interfaces HC-109
hello acknowledgment
See ACK
hello interval
changing MPC-167
hello-interval (IS-IS) command RC-166
hello interval (OSPF) command RC-210
hello-multiplier command RC-166
hello-padding command RC-166
hello-password command RC-162, RC-167
hierarchical optical network
GMPLS MPC-50
high availability
RSVP MPC-130
high availability overview SC-94
highest ip address resolution IC-171
hitless key rollover
accept-tolerance command SC-70
procedure SC-70
holdtime command MPC-21, RC-118
host names
certification authority interoperability, configuring (examples) SC-6
host services and applications
Cisco inetd IC-99
description IC-97
domain services IC-98
domain command IC-104
domain name command IC-104
domain name-server command IC-104
file transfer services IC-99
File Transfer Protocol (FTP) IC-100
ftp client anonymous-password command IC-108
ftp client passive command IC-108
ftp client source-interface command IC-109
rcp client source-interface command IC-107
rcp client username command IC-107
remote copy protocol (RCP) IC-100
tftp client source-interface command IC-110
tftp server command IC-105
Trivial File Transfer Services (TFTP) IC-100
network connectivity IC-99
ping command IC-102
traceroute command IC-103
ping IC-98
prerequisites IC-98
telnet IC-101
telnet server enable command IC-111
TFTP server IC-100
traceroute IC-98
HSRP (Hot Standby Router Protocol)
description IC-117
hw-module location command SMC-189, SMC-192, SMC-213, SMC-214, SMC-215
hw-module node reload command HC-135
hw-module port command HC-134, HC-135
hw-module qos multicast enable command MCC-36
hw-module qos multicast priority queue command MCC-36
hw-module subslot cardtype command
for T3 and E3 controllers HC-37, HC-38
hw-module subslot reload command HC-391
I
ICMP Path Jitter operation parameters, list of MNC-92
ICMP rate limiting, description IC-167
identifying CSC topology MPC-262
IEEE 802.3ad standard HC-246
IETF DS-TE mode MPC-46
if-pre submode
ipv4 address command HC-281
if submode
bundle id command HC-251, HC-252, HC-258, HC-262
bundle-id command HC-252, HC-256
controller sonet command HC-11
duplex command HC-292
interface command HC-10
ip address command HC-250, HC-254, HC-256, HC-261
ipv4 address command HC-10, HC-11, HC-137, HC-236, HC-289, HC-344, RC-241
keepalive command HC-11
mtu command HC-289
no shutdown command HC-11, HC-137, HC-251, HC-256, HC-258, HC-262, HC-289
pos crc command HC-11
See interface command
See interface preconfigure command
show srp ips interface srp command HC-140
speed command HC-294
srp interface srp request manual-switch command HC-140
srp ips request forced-switch command HC-140, HC-145, HC-146
srp ips timer command HC-140
srp ips wtr-timer command HC-139
srp topology-timer command HC-137
tunnel destination command HC-272
tunnel source command HC-272
ignore-lsp-errors command RC-156
IGP
prefixes MPC-3
routing protocols MPC-2
IGP synchronization, LDP MPC-10
IKE (Internet Key Exchange) security protocol
algorithms
encryption SC-32
hash SC-32
options SC-24
authentication
DH (Diffie-Hellman)
group identifier, specifying SC-32
IKE policy parameter SC-23
enabling and disabling SC-30
extended authentication SC-28
group identifier, specifying SC-32
ISAKMP identity, configuring SC-26
keys
See keys, preshared; keys, preshared using AAA server; RSA keys
mode configuration SC-28
negotiations SC-23
policies
configuring (example) SC-59
identifying SC-32
multiple SC-25
purpose SC-22
viewing SC-33
policies, configuring SC-31
requirements
RSA encrypted nonces method SC-25
RSA signatures method SC-25
supported standards SC-20
See also IPSec; RSA encrypted nonces; SAs
ILMI
on ATM interfaces HC-222
immediate threshold violation MNC-117
implicit deny MPC-143
import route-policy command MPC-233
import route-target command MPC-233
in-channel signaling SBC-5
inheritance
configurations (BGP) RC-10
monitoring RC-14
install activate command SMC-34
install command, synchronous and asynchronous operation SMC-15
install rollback committed command SMC-45, SMC-48, SMC-49
Intelligent Protection Switching (IPS) HC-138
interarea tunnels RC-145
configuring MPC-109
Inter-AS configurations
BGP MPC-217
interprovider VPN MPC-217
supported MPC-217
interface all command MCC-20
interface Bundle-Ether command HC-250, HC-254
interface Bundle-POS command HC-248
interface command IC-63, HC-77, HC-98, MPC-13, MPC-16, MPC-77, MPC-139, MPC-175, MCC-25, RC-118, RC-263, SBC-20, SBC-21
ATM interface configuration mode HC-192, HC-197, HC-203, HC-204, HC-206, HC-210, HC-217, HC-219, HC-220, HC-224
ATM subinterface configuration mode HC-200
Fast Ethernet HC-288
for Ethernet interfaces HC-83, HC-100
for Fast Ethernet interfaces HC-80
for VLAN subinterfaces HC-96
forVLAN subinterfaces HC-100
Link Bundling HC-251, HC-258, HC-261
loopback HC-236
Management Ethernet HC-291, HC-293, HC-295
null HC-238
on ATM interfaces HC-223
on POS interfaces HC-114, HC-124, HC-344, HC-346
POS interfaces configuration mode HC-117
PPP HC-323, HC-326, HC-328, HC-329, HC-332, HC-335, HC-337, HC-338
serial interface configuration mode HC-165, HC-168, HC-176
SONET APS HC-10
SRP HC-137, HC-139, HC-144, HC-145, HC-146
tunnel IPSEC HC-272
interface ID application MPC-173
interface loopback command HC-10
interface POS command HC-262
interface preconfigure command SMC-194, SMC-195
POS HC-281
interfaces
IP addresses
primary IC-157
secondary IC-162
Link Bundling HC-243
configuring HC-249
link failover HC-249
prerequisites HC-244
QoS HC-247
tunnel HC-268
interface sbc command SBC-4, SBC-6, SBC-4, SBC-10
interface service-gre command SC-94
interface service-ipsec command SC-94
interface submode
bgp policy accounting command IC-64
See interface command
service-policy command HC-144, QC-23
interface tunnel-te command MPC-61, MPC-63, MPC-68, MPC-71, MPC-97, MPC-98, MPC-101, MPC-114
Interior Gateway Protocols
See IGP
interior routers RC-192
Internal Forwarding Information Base
interprovider VPN
MPLS VPN MPC-217
invert command
on serial interfaces HC-168
IP
access control IC-15
access groups IC-15
access lists
inbound or outbound interfaces, applying on IC-14
undefined IC-15
virtual terminal lines, setting on IC-14
addresses
classes IC-157, IC-162, IC-165
interfaces, assigning to IC-157, IC-162, IC-165
multiple IC-162
multiple, assigning IC-162
primary IC-157
secondary IC-162
primary address IC-157
secondary addresses IC-162
ip address command
bundle-POS HC-250, HC-254, HC-256, HC-261
IPARM conflict resolution
highest ip IC-169
longest prefix IC-169
static policy resolution IC-169
IPCC connectivity using O-UNI devices MPC-172
IPCC control channel
configuring MPC-75
ipcc routed command MPC-87, MPC-88, MPC-174
IP Control Channels
See IPCC
IP DSCP (differentiated services code point) value
when to use QC-16
IP precedence
default QC-15
edge router function QC-15
Low Latency Queueing (LLQ) QC-14
overview QC-14
packet classification QC-15
QoS features supported QC-16
reset recommendation QC-16
ToS field QC-14
values (table) QC-15
when to use QC-16
WRED QC-14
ip precedence command SBC-4
IP precedence marking SBC-5
IP router, O-UNI client device MPC-172
IPS
forced switch HC-138
IPSec (IPSec Network Security Protocol)
CAs
implementing with SC-5
implementing without SC-5
IPSec (IP Security)
checkpointing, description SC-89
crypto access lists SC-87
cautions, creating SC-120
creating SC-97
purpose SC-87
crypto profiles SC-86
applying to transport SC-122
applying to tunnel-ipsec interfaces SC-120
static or dynamic, configuring SC-100
dynamic crypto profiles SC-87
group policy definition
mode configuration SC-33
lifetimes
global, setting SC-95
prerequisites, implementing SC-84
transform sets
defining SC-99
description SC-88
IPSec, implementing SC-5
IPSec-protected GRE virtual interface, procedure SC-127
IPSec VPN SPA
antireplay window SC-90
DF bit override overview SC-89
DPD message SC-29
how to display hardware SC-93
load balancing and high availability SC-94
NAT transparency SC-90
overview SC-92
prefragmentation SC-91
restrictions SC-85
SA idle timers SC-90
IP Service Level Agreements
See IP SLA MNC-51
IP services
MPLS Layer 3 VPN MPC-212
IP SLA
benefits MNC-54
control protocol MNC-56
improvements, list of MNC-53
introduction MNC-51
operation, types of MNC-56
performance measurement MNC-54
reaction, how to MNC-58
responder
about MNC-56
enabling MNC-59
response time MNC-57
schedule MNC-58
technology MNC-52
threshold monitoring MNC-58
vrf MNC-58
ipsla operation command
ICMP Echo operation MNC-78
ICMP Path Echo operation MNC-85
ICMP Path Jitter operation MNC-93
UDP Echo operation MNC-71
UDP Jitter operation MNC-63
ipsla reaction operation command MNC-58
ipsla reaction trigger command MNC-124
ipsla responder command
description MNC-59
example MNC-60
ipsla schedule operation command
ICMP Echo operation MNC-79
ICMP Path Echo operation MNC-86
ICMP Path Jitter operation MNC-94
UDP Echo operation MNC-72
UDP Jitter operation MNC-64
IP Time to Live
See TTL
ip tos command SBC-4
ipv4 access-list command MCC-22, MCC-24, MCC-26, MCC-34
ipv4 address command HC-77, HC-80, HC-96, HC-248, HC-250, HC-254, MPC-75, MPC-80, MPC-95, MPC-97, MPC-101, MPC-235, MCC-31, MCC-32, SBC-20, SBC-4, SBC-10
10 Gigabit Ethernet RC-241
Fast Ethernet HC-289
loopback HC-236
on ATM subinterfaces HC-192, HC-200
on serial interfaces HC-165
POS preconfigure HC-281
IPv4-compatible IPv6 address IC-145
IPv4-compatible IPv6 address format, figure IC-145
IPv4 multicast routing MCC-3
IPv4 packet header format, figure IC-147
IPv4 TNA address support MPC-172
ipv4 unnumbered command MPC-80, MPC-95, MPC-97, MPC-101
ipv4 unnumbered loopback command MPC-61
ipv4 unreachables command HC-238
IPv6
ICMP packet header IC-155
IS-IS support
multitopology RC-141
single-topology RC-140
packet header IC-147
path MTU discovery IC-150
RFC 2460 IC-141
RIB support RC-279
routing RC-139
ipv6-address argument
defined in RFC 2373 IC-159
IPv6 address formats IC-142
IPv6 address type
multicast IC-145
unicast IC-143
IPv6 extension header format, figure IC-149
IPv6 extension header types, figure IC-150
IPv6 for Cisco IOS
description IC-141
IPv6 multicast address
used instead of broadcast addresses IC-146
IPv6 multicast address format, figure IC-146
IPv6 multicast groups
configuration information IC-159
IPv6 multicast routing MCC-3
IPv6 neighbor discovery - neighbor redirect message, figure IC-154
IPv6 neighbor discovery - neighbor solicitation message, figure IC-151
IPv6 neighbor discovery - router advertisement method, figure IC-153
IPv6 neighbor redirect message IC-154
IPv6 packet header format, figure IC-148
ipv6-prefix argument
defined in RFC 2373 IC-159
IPv6 solicited-node multicast address format, figure IC-146
ISAKMP SC-21
See also IKE SC-19
ISAKMP profile
considerations SC-26
locally sourced and destined traffic procedure SC-49
overview SC-26
service interfaces procedure SC-54
IS-IS (Intermediate System-to-Intermediate System)
adjacencies, tuning RC-165
attached bit on an instance RC-143
authentication, configuring RC-160
Cisco IOS and Cisco IOS XR software differences, configuration
grouped RC-138
configuration
grouped configuration RC-138
Level 1 or Level 2 routing RC-146
multitopology RC-153
restrictions RC-136
single topology RC-149
customizing routes RC-170
default routes RC-143
description RC-135
enabling RC-146
enabling multicast-intact RC-175
functional overview RC-137
grouped configuration RC-138
IPv6 routing RC-139
Level 1 or Level 2 routing, configuration RC-146
LSP flooding
controlling RC-154
lifetime maximum RC-140
limiting RC-139
MPLS LDP IS-IS synchronization RC-173
MPLS TE
configuring RC-162
description RC-142
multi-instance IS-IS RC-142
multitopology, configuring RC-153
nonstop forwarding RC-141
configuring RC-158
overload bit
configuring RC-140
on router RC-142
policy attach points
redistribute RC-330
priority for prefixes added to RIB RC-178
restrictions, configuring RC-136
set SPF interval RC-168
single topology
configuring RC-149
single-topology
IPv6 support RC-140
tagging IS-IS interface routes RC-176
IS-IS address family submode RC-138
ispf command RC-169
ISP requirements
MPLS L2VPN MPC-188
is-type command RC-148
K
keepalive command HC-11
on POS interfaces HC-113, HC-124, HC-344
on serial interfaces HC-162, HC-176
keepalive timer
description HC-111
monitoring SLARP packets HC-109
monitoring the POS link state HC-110, HC-111
using the debug chdlc slarp packet command HC-109
key (key chain) command SC-72
key chain
configuration (example) SC-79
configuring SC-69
end-time SC-68
key identifier, configuring SC-71
lifetime SC-68
outbound traffic, configuring SC-76
overview SC-68
start-time SC-68
text, configuring SC-73
valid key, determining SC-74
key chain command SC-69
key identifier, configuring SC-71
keyring command SC-49
keyring configuration mode, enabling SC-39
keys
mask preshared SC-27
preshared
configuring (example) SC-40
IKE policy parameter SC-23
preshared using AAA server SC-27
key string, configuring SC-73
key-string command SC-74
key validation, determining SC-74
L
l2protocol command HC-85, HC-101
l2transport command HC-85, MPC-203
L2VPN
See Layer 2 VPN HC-71
l2vpn command MPC-196
label accept for command MPC-29
label advertise command MPC-19
label advertisement
configuration prerequisites MPC-19
label advertisement control, LDP MPC-9
label allocate for command MPC-30
label-allocation-mode command MPC-237
label bindings
configuring MPC-4
exchanging MPC-4
Label Distribution Protocol
See LDP
Label Switched Paths
See LSPs
Layer 2 VPN
configuring an attachment circuit HC-84
configuring Layer 2 protocol tunneling and data units HC-85
enabling Layer 2 transport mode HC-85
overview HC-71
using the l2transport command HC-85
LCC serial number
displaying with CLI SMC-176
LCP (Link Control Protocol) HC-110, HC-159
configuration examples MPC-36
control communication failure MPC-7
control messages MPC-3
control plane MPC-3
failure MPC-6
Control Protocol (example) MPC-3
control state recovery MPC-7
discovery
active targeted hellos, configuration MPC-15
parameters, configuring MPC-11
passive targeted hellos, configuration MPC-17
discovery over a link
configuring MPC-13
prerequisites MPC-13
dynamic path setup MPC-2
forwarding, configuring MPC-23
graceful restart MPC-5
failure recovery MPC-7
setting up LDP NSF MPC-25
hello discovery mechanism MPC-3
hop-by-hop MPC-2
IGP prefixes MPC-3
IGP synchronization MPC-10
implementation MPC-11
keepalive mechanism MPC-3
label advertisement MPC-9
configuring MPC-19
prerequisites MPC-19
label advertisement control MPC-9
local and remote label binding MPC-3
local label advertisement control MPC-9
local label allocation control MPC-9
LSPs, setting up MPC-4
neighbors
support for MPC-3
NSF services MPC-5
peer control plane MPC-7
persistent forwarding MPC-7
prerequisites
general MPC-2
session protection MPC-10
LDP backoff command MPC-21
LDP configuration submode
ldp command MPC-12
LDP forwarding MPC-4
setting up MPC-4
LDP forwarding, configuring MPC-23
LDP label advertisement MPC-9
life command
ICMP Echo operation MNC-79
ICMP Path Echo operation MNC-86
ICMP Path Jitter operation MNC-94
UDP Echo operation MNC-72
UDP Jitter operation MNC-64
lifetime, key chain SC-68
line aux command SMC-114, SMC-118
line card
removal SMC-193
line command SMC-114
line console command SMC-114, SMC-118
line default command SMC-114, SMC-118
line template command SMC-114, SMC-119
line template configuration submode SMC-114
description SMC-114
See line aux command
See line command
See line console command
See line default command
See line template command
Link Aggregation Control Protocol HC-246
link bundling
configuring VLAN bundles HC-93
link failover HC-249
link-local address IC-144
link-local address format, figure IC-145
link-state advertisement (LSA)
OSPFv2 RC-195
lmi-n391dte command HC-356
lmi-n392dce command HC-356
lmi-n392dte command HC-356
lmi-n393dce command HC-356
lmi-n393dte command HC-356
lmi-t392dce command HC-356
lmp data-link adjacency command MPC-90, MPC-92, MPC-175
LMP data-link adjacency submode
exit command MPC-177
LMP message exchange
disabling MPC-88
enabling MPC-86
lmp neighbor command MPC-86, MPC-88, MPC-90, MPC-174
lmp static command MPC-88
load balancing overview SC-94
local and remote TE links MPC-79
local-as command RC-68
local-id host command SBC-8
local label advertisement control, LDP MPC-9
local label allocation control, LDP MPC-9
local label binding MPC-3
Local Management Interface (LMI) HC-161
Local Packet Transport Services
local reservable bandwidth
configuring MPC-82
local switching capability descriptors
configuring MPC-83
location command SMC-141, SMC-142, SMC-143, SMC-144, SMC-145, SMC-146, SMC-147, SMC-149, SMC-151, SMC-153, SMC-155
log adjacency changes command RC-166, RC-205
logging
call SBC-4
logging buffered command MNC-138
logging command MNC-142
logging console command MNC-139
logging correlation MNC-23, MNC-24
correlation rules, configuring MNC-44, MNC-45
logging correlation rules MNC-24
configuring MNC-27
logging correlator apply-rule command MNC-29
logging correlator buffer MNC-23
buffer settings, modifying MNC-32
logging correlator buffer-size command MNC-33
logging correlator rule command MNC-28
logging events buffer MNC-23, MNC-24
buffer settings, modifying MNC-30
logging events buffer-size command MNC-31
logging events level command MNC-32
logging events threshold command MNC-31
logging facility command MNC-142
logging history command MNC-144
logging history size command MNC-144
logging hostname prefix command MNC-142
logging monitor command MNC-140
logging on command MNC-138
logging process MNC-23
logging source-interface command MNC-143
logging suppress duplicates command MNC-149
logging trap command MNC-142
log-neighbor-changes command RC-128
log-neighbor-warnings command RC-128
Longest Prefix Resolution IC-170
looding-igp ospf command MPC-83
loopback
naming convention HC-233
loopback command HC-6
Loose hop reoptimization MPC-55
Low Latency Queueing (LLQ)
See queueing
LPTS
components
flow managers IC-137
port abitrator IC-137
LSP
configuring MPC-99
hierarchy MPC-99
MPLS-TE MPC-45
lsp-check-interval command RC-155
LSP flooding
controlling RC-154
lifetime maximum RC-140
limiting RC-139
mesh group configuration RC-140
on specific interfaces RC-140
lsp-gen-interval command RC-155
lsp-interval command RC-156
lsp-mtu command RC-155
lsp-password command RC-161
lsp-refresh-interval command RC-155
LSPs
description MPC-2
lsr-path command MNC-90
M
MAC (message authentication code) SC-77
authentication option SC-68
cryptographic algorithm procedure SC-77
mac accounting command HC-83
mac-accounting command HC-70
mac address command HC-70, HC-78
MAM bandwidth constraint model
characteristics MPC-47
management ethernet interface, configuring HC-286
marking command SBC-3
master command SMC-103
match access-group command QC-17
match cos command QC-17
match discard-class command QC-18
match dscp command QC-18
match identifier command MPC-97
match identity command SC-49
match mpls experimental topmost command HC-142
match precedence command HC-142, QC-18
match protocol command QC-18
match qos-group command QC-18
match-type command SBC-10
match-value command SBC-10
match vlan command QC-18
Maximum Allocation Model (MAM) bandwidth constraint model MPC-47
maximum paths command RC-122
maximum-paths command RC-172
maximum-prefix command RC-123
max-lsp-lifetime command RC-155
MBI SMC-186
MD5 (Message Digest 5) algorithm SC-21
IKE policy parameter SC-23
mdl string command HC-40, HC-46
mdl transmit command HC-35, HC-40, HC-45
MDRR (Modified Deficit Round Robin), defined QC-40
media-address ipv4 command SBC-5, SBC-12
media address pools
about SBC-2
configuring SBC-2
example SBC-5
restrictions SBC-1
media-bypass-bypass command SBC-9
media-bypass command SBC-7, SBC-9
media streams SBC-4
mesh-group command MCC-31, RC-156
mesh restoration, GMPLS MPC-52
message-digest-key command RC-214
message logging
facility types
(table) MNC-133
syslog serverMNC-133to ??
message statistics RC-280
messaging SBC-4
metric-style wide command RC-164, RC-177, RC-179
metro-zero-accept command RC-265
control plane MPC-125
control plane services MPC-125
data plane services, about MPC-125
LDP MPC-125
TE MPC-125
MIB, description SMC-237
minimum boot image SMC-186
mode command HC-42
Modular Quality of Service CLI (MQC)
configuring with SRP HC-141
module
node ID component SMC-178, SMC-181
monitor map HC-369
MPLS
package features SMC-55
MPLS forwarding
forms MPC-125
MPLS Forwarding Infrastructure
See MFI
MPLS L2VPN
concepts MPC-188
configuration examples MPC-206
configuring MPC-195
configuring L2VPN quality of service in port mode MPC-203
configuring L2VPN quality of service in VLAN mode MPC-204
emulates LAN MPC-188
high availability MPC-194
ISP requirements MPC-188
overview MPC-188
prerequisites MPC-188
Quality of service (QoS) MPC-192
MPLS Layer 3 VPN
automatic route distinguisher MPC-215
autonomous system MPC-216
components MPC-211
concepts MPC-210
customer edge router MPC-211
customer router MPC-211
defined MPC-210
distributed routing information MPC-214
FIB MPC-210
how it works MPC-213
implementing MPC-210
IP services MPC-212
major components MPC-215
MPLS forwarding MPC-215
PE router MPC-211
prerequisites MPC-209
provider router MPC-211
restrictions MPC-210
scalability MPC-212
security MPC-212
topology MPC-211
VPN routing information MPC-214
mpls ldp command MPC-11, MPC-13, MPC-17, MPC-21, MPC-24
MPLS LDP IGP synchronization RC-144
MPLS LDP IS-IS synchronization RC-173
mpls ldp sync command MPC-33, MPC-34, RC-174
mpls optical-uni command MPC-174, MPC-178
MPLS-TE
backbone MPC-44
benefits MPC-45
concepts MPC-45
engineering a backbone MPC-45
extensions MPC-45
fast reroute MPC-49
flooding MPC-48
flooding thresholds MPC-48
flooding triggers MPC-48
GMPLS MPC-50
implementation MPC-56
link management module MPC-45
overview MPC-44
path calculation module MPC-45
prerequisites MPC-44
topology
building MPC-57
prerequisites MPC-57
tunnels
creating MPC-60
with label switching forwarding MPC-45
with RSVP MPC-45
MPLS TE (Multiprotocol Label Switching traffic engineering) configuring
IS-IS RC-162
OSPFv2 RC-232
MPLS TE forwarding adjacency RC-145
MPLS TE interarea tunnels RC-145
MPLS-TE topology MPC-57
mpls traffic-eng area command MPC-77, RC-234
mpls traffic-eng command MPC-57, MPC-65, MPC-71, MPC-73, MPC-86, RC-163
MPLS traffic engineering
See MPLS-TE
mpls traffic-engineering multicast-intact command RC-176
mpls traffic-eng path-protection switchover command MPC-104
mpls traffic-eng router-id command MPC-57, RC-163, RC-233
MPLS VPN
benefits MPC-211
major components MPC-215
MPLS VPN Inter-AS
ASBRs MPC-216
MQC (Modular QoS command-line interface), summary QC-4
MSB service card SBC-3
MSC card removal SMC-193
MS-CHAP (Microsoft version of CHAP)
and PPP HC-110
MS-CHAP authentication HC-321, HC-322, HC-323, HC-324, HC-329, HC-338
MSDP (Multicast Source Discovery Protocol)
See multicast routing, MSDP
MTU (maximum transmission unit), default path
crypto ipsec pmtu command SC-130
procedure SC-130
mtu command HC-70, HC-71, HC-78, HC-81, HC-289
on POS interfaces HC-113, HC-117
on serial interfaces HC-162
multi-area adjacency
configuring RC-247
interface attributes and limitations RC-202
overview RC-202
multi-area-interface command RC-247
multicast
See multicast routing
multicast-intact RC-143
OSPFv2 RC-201
multicast NSF (multicast nonstop forwarding)
See multicast routing, multicast NSF
multicast routing
Auto-RP
configuring MCC-23
description MCC-11
RP-mapping agent MCC-11
BSR
DR
dr-priority command MCC-9
failure MCC-9
multiaccess segment MCC-9
purpose MCC-9
IGMP
description MCC-5
host group addresses MCC-5
router IGMP submode, description MCC-15
interfaces
configuration inheritance MCC-17
enabling and disabling MCC-18
MLD
description MCC-5
router MLD submode, description MCC-16
versions MCC-5
MSDP
default, SA messages MCC-34
default peering MCC-31
logical RP MCC-31
PIM-SM domains, interconnecting MCC-31
router MSDP submode, description MCC-16
source information, controlling MCC-34
multicast NSF
configuring MCC-28
converge and reconnect MCC-28
prerequisites MCC-28
timeout values MCC-28
PIM
leaf routers MCC-8
restrictions, configuration MCC-19
router PIM submode, description MCC-15
shared tree to source tree process MCC-8
show pim neighbor command MCC-10
PIM-SM
configuring MCC-19
description MCC-7
RP MCC-7
PIM-SSM
configuring MCC-19
datagrams, delivery MCC-7
description MCC-7
IGMPv3 support MCC-8
QOS
overview MCC-13
RP, description MCC-10
RPF MCC-12
RPT MCC-8
shared tree MCC-8
shortest path tree MCC-8
source tree MCC-8
static RP, configuring MCC-21
multicast-routing command MCC-20, MCC-28
multicast-routing submode
description MCC-14
See multicast-routing command
multicast topology RC-144
multi-instance IS-IS RC-142
multilink command HC-346
multilink fragment-size command HC-344
multiprotocol BGP RC-30
Multiprotocol Label Switching control processor (MPLSCP) HC-110, HC-160
multiservice blade SBC-17
multitopology
configuring RC-153
example RC-180
multi-VRF
overview SBC-6
N
naming conventions
loopback HC-233
null interface HC-233
preconfigure HC-280
overview SBC-5
nat-enable command SBC-5
national bits command HC-35, HC-36, HC-43, HC-53, HC-55
NAT transparency (IPSec)
crypto nat-transparency command SC-110
overview SC-90
procedure SC-109
NBMA networks RC-193
negotiation auto command HC-71, HC-78, HC-81
neighbor address family command RC-7, RC-138
neighbor command MPC-21, MPC-92, MPC-196, MPC-197, MPC-237, RC-7, RC-138, RC-262
neighbor command (BFD) HC-306
neighbor command (OSPFv2, OSPFv3) RC-211
neighbor discovery IC-151
neighbor-group command RC-68
neighbors
adjacency (OSPFv2) RC-194
maximum limits (BGP) RC-4
neighbor solicitation message IC-151
net command RC-147
NetFlow
configuring HC-373
exporter map HC-370
flow exporter map configuration submode HC-371
flow exporter map version configuration submode HC-372
flow monitor map configuration submode HC-372
monitor map HC-369
prerequisites HC-368
restrictions HC-368
sampler map HC-370
sampler map configuration submode HC-372
Network Address Translation (NAT) IC-141
network address translator SBC-5
network command MPC-237, RC-53, RC-210
network connectivity
ping IC-99
ping command IC-102
traceroute IC-99
traceroute command IC-103
Network Control Protocols (NCPs) HC-110, HC-160
network stack IPv4 and IPv6
address repository manager functionality IC-155
architecture IC-141
next-hop-self command RC-79
node
administrative shutdown SMC-192
power cycle SMC-189
reload SMC-189
shutdown SMC-189
no hw-module node command SMC-198, SMC-206
no interface command HC-102
no logging events link-status command MNC-150
nonces
See RSA encrypted nonces
nonrecursive accounting. See Cisco Express Forwarding
Nonstop Forwarding
See NSF
Nonstop forwarding HC-248
nonstop forwarding, configuring (OSPFv2) RC-230
no shutdown command HC-11
(warning) HC-280
bundle-POS HC-251, HC-256, HC-258, HC-262
Fast Ethernet HC-289
for Ethernet interfaces HC-78
for Fast Ethernet interfaces HC-81
SRP HC-137
not-so-stubby area RC-191
NSF
enabling graceful restart MPC-140
high-availability MPC-130
with RSVP MPC-130
nsf command MCC-28, RC-158, RC-264
nsf interface-expires command RC-159
nsf interface-timer command RC-159
nsf interval command RC-232
nsf lifetime command MCC-28, MCC-30, RC-159
nssa command RC-207
NTP
configuring an authoritative NTP server SMC-102
configuring broadcast-based NTP associations SMC-93, SMC-107
configuring NTP access groups SMC-95
configuring NTP authentication SMC-97, SMC-108
configuring poll-based associations SMC-91, SMC-107
configuring the source IP address SMC-101, SMC-109
disabling NTP services on an interface SMC-99
functional overview SMC-90
updating the hardware clock SMC-104, SMC-109
null0 submode
ipv4 unreachables command HC-238
See ipv4 unreachables command
null interface
configuring HC-234
displaying HC-235
naming convention HC-233
numbered and unnumbered links
configuring MPC-79
numbered optical TE tunnels
configuring MPC-94
O
Oakley key exchange protocol SC-21
See also IKE
oam ais-rdi command
on ATM interfaces HC-215
OAM management
on ATM interfaces HC-215
oam-pvc manage command
on ATM interfaces HC-215
oam retry command
on ATM interfaces HC-215
OIR
line cards, MSCs and PLIMs SMC-193
switch fabric cards, 16-slot FCC SMC-195
switch fabric cards, 8-slot FCC SMC-204
old-register-checksum command MCC-22
online insertion and removal
See OIR
operation, IP SLA types MNC-56
optical switches MPC-50
GMPLS MPC-50
optical transport network
See OTN
Optical User Network Interface
See O-UNI
options command HC-375
originator-id command MCC-31
OSPF
configuring MPC-77
over IPCC MPC-77
ospf area configuration submode
dead-interval command RC-210
default-cost command RC-207
hello interval command RC-210
interface command RC-205
network command RC-210
nssa command RC-207
range command RC-223
stub command RC-207
ospf area submode
authentication message-digest command RC-220
virtual-link command RC-220
ospf interface configuration submode
log adjacency changes RC-205
neighbor command RC-211
OSPFv2 (Open Shortest Path First Version 2)
authentication, configuring RC-213
CiscoIOS XR OSPFv3 and OSPFv2 differences RC-189
CLI (command-line interface) inheritance RC-189
configuration
MPLS TE RC-232
neighbors, nonbroadcast networks RC-208
configuration and operation, verifying RC-248
default route RC-194
description RC-185
Designate Router (DR) RC-194
enabling RC-203
functional overview RC-187
instance and router ID RC-192
LSA
controlling the frequency RC-216
on an OSPF ABR RC-222
types RC-195
MD5 authentication RC-193
MPLS TE, configuring RC-232
neighbors, adjacency RC-194
neighbors, nonbroadcast networks, configuring RC-208
nonstop forwarding
configuring RC-230
description RC-198
policy attach points
default originate RC-326
route authentication methods
key rollover RC-193
MD5 RC-193
plain text RC-193
strategies RC-193
route redistribution
configuring RC-224
description RC-197
Shortest Path First (SPF) throttling
configuring RC-227
description RC-197
stub and not-so-stubby area types, configuring RC-206
supported OSPF network types
NBMA networks RC-193
point to point networks RC-193
virtual link
creating RC-218
transit area RC-196
OSPFv2 (Open Shortest Path First version 2)
enabling multicast-intact RC-239
OSPFv3 (Open Shortest Path First Version 3) RC-227
CiscoIOS XR OSPFv3 and OSPFv2 differences RC-189
CLI inheritance RC-189
configuration
neighbors, nonbroadcast networks RC-208
SPF throttling RC-227
configuration and operation, verifying RC-248
default route RC-194
description RC-185
enabling RC-203
functional overview RC-187
graceful restart RC-236
instance and router ID RC-192
load balancing RC-202
LSA
controlling frequency RC-216
on an OSPF ABR RC-222
types RC-195
neighbors
nonbroadcast networks, configuring RC-208
policy attach points
default originate RC-328
routes, redistribute RC-224
SPF (Shortest Path First) throttling configuring RC-227
stub and not-so-stubby area types, configuring RC-206
virtual link, description RC-196
ospfv3 area configuration submode
dead-interval command RC-210
default-cost command RC-207
hello interval command RC-210
interface command RC-205
network command RC-210
nssa command RC-207
range command RC-223
stub command RC-207
OSPFv3 Graceful Restart feature RC-199
adjacency RC-200
displaying information RC-239
ospfv3 interface configuration submode
log adjacency changes RC-205
neighbor command RC-211
OTN transport services MPC-172
O-UNI
active side configuration MPC-183
configuration
active side MPC-183
bandwidth MPC-140
data-link MPC-183
neighbor MPC-183
passive side MPC-183
router MPC-183
verifying MPC-179
configuring connections MPC-174
connection identifiers MPC-172
connections
establishing MPC-173
tearing down MPC-177
connections,tearing down
example MPC-183
database requirement MPC-172
data-link configuration MPC-183
neighbor and data link configuration MPC-182
neighbor configuration MPC-183
N node MPC-172
passive side configuration MPC-183
prerequisites
general MPC-171
setting up a connection MPC-174
router configuration MPC-183
RSVP messages used MPC-172
standards MPC-171
with RSVP MPC-172
O-UNI client devices
ADMs MPC-172
IP routers MPC-172
outbound traffic (key chain), configuring SC-76
output-delay command RC-264
overhead command HC-6
overload bit
configuration RC-140
on router RC-142
P
P2MDRR (packet-by-packet MDRR), defined QC-40
p2p command MPC-196
package
activation
impact on running configuration SMC-14
addition, introduction SMC-8
committing a package set SMC-10
deactivation SMC-40
impact on running configuration SMC-14
rollback SMC-10
set
committing SMC-39
package installation envelope SBC-3
packet count command
ICMP Path Jitter operation MNC-93
UDP Jitter operation MNC-63
packet interval command
ICMP Path Jitter operation MNC-93
UDP Jitter operation MNC-64
pairing command SMC-142
pairing-config submode
pairing command SMC-142
PAP (Password Authentication Protocol), and PPP HC-110
PAP authentication HC-321, HC-322, HC-323, HC-324, HC-325, HC-326, HC-334, HC-335
partitioning network, QoS packet marking QC-14
passive command MPC-97, SBC-21
passive-interface command RC-267
passive targeted hellos, configuring MPC-17
password accept command RC-69
password command MPC-237
password-disable command RC-69
path calculation module, MPLS-TE MPC-45
path command
FRR and SONET APS HC-14
on the SONET controller HC-7
path-option command MPC-61, MPC-65, MPC-95, MPC-101
path protection, GMPLS
forced reversion procedure MPC-103
LSP
overview MPC-100
procedure MPC-100
path scrambling command HC-11
PCMU SBC-4
peer submode
remote-as command MCC-33
Performance Management (PM)
benefits MNC-165
functional overview MNC-164
PM entity instance monitoring
enabling MNC-188
overview MNC-170
PM statistics collection, overview MNC-166
PM statistics collection templates
creating MNC-166, MNC-184, MNC-193
description MNC-166
enabling MNC-167, MNC-186, MNC-193
TFTP server, configuring MNC-183
PM Statistics Collector, description MNC-165
PM Statistics Server, description MNC-164
PM threshold monitoring, overview MNC-173
PM threshold monitoring templates
creating MNC-173, MNC-188, MNC-190
enabling MNC-182, MNC-191, MNC-194
performance measurement, IP SLA MNC-54
performance-mgmt apply monitor command MNC-189
performance-mgmt apply statistics command MNC-187
performance-mgmt apply thresholds command MNC-192
performance-mgmt resources tftp-server MNC-183
performance-mgmt statistics command MNC-185
performance-mgmt thresholds command MNC-190
PE router
MPLS Layer 3 VPN MPC-211
persistent interface index
configuring MPC-85
per VRF (VPN routing and forwarding) AAA
procedure SC-187
server-private command SC-188
supported VSAs SC-187
vrf command SC-188
PFS (perfect forward secrecy)
overview SC-89
set pfs command SC-89
physical terminals
aux line template
description SMC-114
console line template
description SMC-114
default line template
description SMC-114
line template configuration submode, description SMC-114
line template guidelines SMC-115
PIE files
names SMC-5
version numbers SMC-5
PIE service package SBC-3
PIM RC-143
PIM-SSM (Protocol Independent Multicast in Source Specific Multicast)
See multicast routing, PIM-SSM
ping. See host services and applications
ping command IC-102, HC-273, MPC-24, MPC-63
on ATM interfaces HC-201
PLIM
removal SMC-193
replacement
different media type SMC-195
same media type, different port count SMC-194
same media type and port count SMC-194
point-to-point networks RC-193
Point-to-Point protocol
See PPP HC-107
poison-reverse command RC-265
policers and shapers, defined QC-39
policies
detail SBC-1
overview SBC-4
policy, modifying
attached RC-337
nonattached RC-337
policy failure statistics
about SBC-1
commands
automatically tracked SBC-4
per entry SBC-3
per table SBC-3
time-based SBC-2
restrictions SBC-1
policy map class submode
bandwidth command QC-47
bandwidth remaining command QC-47, QC-70
police command QC-56
set cos command QC-26
set discard-class command QC-26
set dscp command QC-25
set precedence command QC-25
set qos-group command QC-26
set srp-priority command QC-26
shape average command QC-53, QC-70
policy-map command HC-142, QC-20
policy map police submode
conform-action command QC-56
exceed-action command QC-51, QC-56
policy map submode
police command HC-143
policy-map command HC-142, QC-20
priority command HC-143
set cos command HC-143
POS (Packet-over-SONET)
See POS HC-107
pos crc command HC-11
on POS interfaces HC-117
POS interface
and Frame Relay Encapsulation HC-107
bringing up HC-114
configuring optional parameters HC-116
configuring PPP authentication HC-110
configuring the CRC value HC-113, HC-117
configuring the encapsulation type HC-113
configuring the keepalive timer HC-113, HC-123, HC-124, HC-344
configuring the MTU HC-113, HC-117
creating subinterfaces with PVCs HC-119
default settings
CRC HC-113
encapsulation HC-113
keepalive HC-113
mtu HC-113
HDLC encapsulation
description HC-107
overview HC-109
interface configuration mode HC-114, HC-117, HC-344, HC-346
PPP encapsulation
description HC-107
overview HC-110
POS interfaces
configuring interface encapsulation HC-117, HC-344
power cycle SMC-189
PPP
authentication
CHAP HC-321, HC-322, HC-323, HC-324, HC-327, HC-328
disabling CHAP HC-337
disabling MS-CHAP HC-338
modfying the default configuration HC-330, HC-332
MS-CHAP HC-321, HC-322, HC-323, HC-324, HC-329
overview HC-320
PAP HC-321, HC-322, HC-323, HC-324, HC-325, HC-326
POS configuration example HC-347
prerequisites HC-320
serial configuration example HC-347
CHAP (Challenge Handshake Authentication Protocol) HC-160
displaying PPP interfaces HC-334
MS-CHAP (Microsoft version of CHAP) HC-160
on POS interfaces HC-107, HC-110
on serial interfaces HC-159
PAP (Password Authentication Protocol) HC-160
prerequisites HC-320
ppp authentication command HC-110, HC-160, HC-320, HC-323
ppp chap password command HC-328
ppp chap refuse command HC-337
ppp max-bad-auth command HC-332
ppp max-configure command HC-332
ppp max-failure command HC-332
ppp max-terminate command HC-332
ppp ms-chap password command HC-329
ppp ms-chap refuse command HC-338
ppp multilink minimum-active links command HC-346
ppp pap refuse command HC-333, HC-335
ppp pap sent-username command HC-325, HC-326, HC-333
ppp timeout authentication command HC-333
ppp timeout retry command HC-333
preconfiguration
advantages HC-279
directory HC-277
naming conventions HC-280
restriction to physical interface HC-277
prefix filtering MPC-133
prefix list
filtering with IC-10
route filtering IC-10
prefragmentation
crypto ipsec pre-fragmentation command SC-115
dependencies SC-91
overview SC-91
procedure
service-gre interfaces SC-116
service-ipsec interfaces SC-115
prerequisites
GMPLS MPC-52
LDP MPC-2
LDP discovery
for active targeted hellos MPC-15
for passive targeted hellos MPC-17
LDP discovery for active targeted hellos MPC-15
LDP discovery for passive targeted hellos MPC-17
LDP discovery over a link MPC-13
LDP forwarding MPC-24
LDP neighbors MPC-21
LDP NSF graceful restart MPC-25
LDP NSF using graceful restart MPC-25
MPLS Layer 3 VPN MPC-209
MPLS-TE MPC-44
topology MPC-57
tunnels MPC-60
O-UNI connections MPC-174
prerequisites, configuration SBC-3
prerequisites for configuration
detail SBC-17
overview SBC-3
preshared keys
See keys, preshared; keys, preshared using AAA server
Prestandard DS-TE mode MPC-46
priority command HC-143, MPC-95, MPC-101
profile command HC-272
protection and restoration, GMPLS
requirements MPC-52
shared mesh MPC-52
span protection MPC-52
protocol-based CLI MPC-46
protocols
border gateway SBC-6
real-time control SBC-5
real-time transport SBC-5
provider router
MPLS Layer 3 VPN MPC-211
PRP
hardware requirements SMC-218
redundancy slot pairs SMC-218
software requirements SMC-218
pseudowire (PW)
MPLS L2VPN MPC-189
ptotection and restoration, GMPLS
end-to-end recovery MPC-52
pulse code modulation u-law SBC-4
PVC
on ATM interfaces HC-193
on ATM subinterfaces HC-191, HC-220
on a vp-tunnel HC-199
on POS subinterfaces HC-119, HC-121
pvc command
on ATM subinterfaces HC-192, HC-200, HC-206, HC-211, HC-220
Q
QOS
overview MCC-13
QoS
MPLS L2VPN MPC-192
QoS (marking)
overview SBC-5
QoS (Quality of Service)
benefits QC-2
characteristics QC-1
congestion mechanisms, policers and shapers QC-39
features
class-based packet marking QC-14
traffic policing QC-4
traffic shaping QC-4
techniques
classification QC-9
congestion avoidance QC-3
congestion management QC-3, QC-39
packet classification QC-2
qos voice command SBC-3
queueing
Low Latency Queuing (LLQ) QC-40
quantum size QC-40
scheduling mechanism QC-40
strict priority QC-40
R
rack number
node ID component SMC-178, SMC-181
RADIUS
configuring
dead-server detection SC-185
UDP ports SC-182
operation SC-174
RADIUS-based call logging SBC-4
radius-server dead-criteria time command SC-186
radius-server dead-criteria tries command SC-186
radius-server deadtime command SC-185
random command HC-377
range command RC-223
RAs (registration authorities)
See CAs
RAW
transport, configuring IC-177
rcp SMC-20
rcp client-source interface command IC-107
rcp client- username command IC-107
rd auto command MPC-233
RDM bandwidth constraint model MPC-47
react command
connection-loss keyword MNC-109
jitter-average keyword MNC-110
packet-loss keyword MNC-112
rtt keyword MNC-113
timeout keyword MNC-114
verify-error keyword MNC-116
reaction, IP SLA how to MNC-58
real-time control protocol SBC-5
real-time transport protocol SBC-5
receive-buffer-size command RC-69
receive version command RC-263
record-based call logging SBC-4
record ipv4 command HC-379
recurring command
ICMP Echo operation MNC-79
ICMP Path Echo operation MNC-86
ICMP Path Jitter operation MNC-94
UDP Echo operation MNC-72
UDP Jitter operation MNC-64
redistribute command MPC-237, MPC-239, RC-58, RC-122, RC-226
redistribute connected command MPC-237
redistribute isis command MPC-237, RC-171
redistribute maximum-prefix command RC-122
redistribute ospfv3 command MPC-237
redistribute static command MPC-237
redundancy
automatic failover SMC-187
commands SMC-187
manual switchover SMC-188
primary RP SMC-186
PRP slot pairs SMC-218
standby RP SMC-186
redundancy (high availability)
overview SBC-5
redundancy switchover command SMC-187, SMC-188
refresh interval and number of refresh messages
changing MPC-166
registration rewrite-register command SBC-13, SBC-14
registration target address command SBC-15
registration target address host command SBC-13
registration target port command SBC-13, SBC-16
reload command SMC-187, SMC-190
reloading software SMC-189
reload spa
after FPD upgrade HC-389
remote-address ipv4 command SBC-5, SBC-6, SBC-8, SBC-12, SBC-9, SBC-10, SBC-12, SBC-13, SBC-14, SBC-15
remote-as command MPC-237, MCC-31, MCC-33
remote-as command (BFD) HC-306
Remote Copy Protocol (rcp) SMC-20
remote interface-id unnum command MPC-90, MPC-92
remote label binding MPC-3
remote node-id command MPC-87, MPC-88, MPC-90, MPC-174
remote node-id ipv4 command MPC-90
remote switching-capability command MPC-90, MPC-92
remote te-link-id unnum command MPC-92
responder, IP SLA
about MNC-56
enabling MNC-59
ipsla responder command MNC-59
type udp ipv4 address command MNC-61
response time, IP SLA MNC-57
restart time
changing MPC-167
retransmit-interval command RC-156
retransmit-throttle-interval command RC-156
reverse path forwarding. See Cisco Express Forwarding
reverse-route command
crypto profiles SC-100
RRI (reverse-route injection) SC-118
RFC 1142, OSI IS-IS Intra-domain Routing Protocol RC-183
RFC 1195
Use of OSI IS-IS IC-166
RFC 1195, Use of OSI IS-IS for Routing in TCP/IP and Dual Environments RC-183
RFC 1587, Not So Stubby Area (NSSA) RC-256
RFC 1771 RC-347
RFC 1793, OSPF over demand circuit RC-256
RFC 1997, BGP Communities Attribute RC-104
RFC 2328, OSPF Version 2 RC-188, RC-256
RFC 2362, Protocol-Independent Multicast-Sparse Mode (PIM-SM) MCC-7
RFC 2385, Protection of BGP Sessions via the TCP MD5 Signature Option RC-104
RFC 2408, ISAKMP SC-21
RFC 2409, The Internet Key Exchange SC-21
RFC 2439, BGP Route Flap Damping RC-104
RFC 2453, RIP Version 2 RC-258, RC-275
RFC 2545, Use of BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing RC-104
RFC 2740, OSPFv3 RC-256
RFC 2740 OSPFv3 RC-188
RFC 2763, Dynamic Hostname Exchange Mechanism for IS-IS RC-183
RFC 2796, BGP Route Reflection - An Alternative to Full Mesh IBGP RC-104
RFC 2858, Multiprotocol Extensions for BGP-4 RC-104
RFC 2918, Route Refresh Capability for BGP-4 RC-104
RFC 2966, Domain-wide Prefix Distribution with Two-Level IS-IS RC-183
RFC 2973, IS-IS Mesh Groups RC-183
RFC 3065, Autonomous System Confederations for BGP RC-104
RFC 3277, IS-IS Transient Blackhole Avoidance RC-183
RFC 3373, Three-Way Handshake for IS-IS Point-to-Point Adjacencies RC-183
RFC 3392, Capabilities Advertisement with BGP-4 RC-104
RFC 3411, An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks SMC-256
RFC 3412, Message Processing and Dispatching for the Simple Network Management Protocol (SNMP) SMC-256
RFC 3413, Simple Network Management Protocol (SNMP) Applications SMC-256
RFC 3414, User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3) SMC-256
RFC 3415, View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP) SMC-256
RFC 3416, Version 2 of the Protocol Operations for the Simple Network Management Protocol (SNMP) SMC-256
RFC 3417, Transport Mappings for the Simple Network Management Protocol (SNMP) SMC-256
RFC 3418, Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) SMC-256
RFC 3567, IS-IS Cryptopgraphic Authentication RC-183
RFC 3623, OSPFv3 RC-256
RFC 4360 RC-347
RFC 4364, BGP/MPLS IP Virtual Private Networks (VPNs) RC-104
RFC 791, Internet Protocol QC-15
RIB (Routing Information Base)
administrative distance RC-279
data structures in BGP and other protocols RC-278
deploying RC-280
description RC-277
examples RC-284
functional overview RC-278
IPv4 and IPv6 support RC-279
monitoring RC-280
prerequisites RC-278
RIB statistics RC-280
rings (outer and inner) HC-132
RIP (Routing Information Protocol)
administrative distance RC-260
bandwidth RC-266
benefits RC-259
CIDR RC-258
control or prevent routing updates RC-266
filter network updates RC-266
hop count RC-258
metrics RC-258
redistribution RC-260
route policy creation RC-268
route timers RC-259
routing loops RC-266
routing policy options RC-261
split horizon, enabling IP RC-259
VLSMs (variable-length subnet masks) RC-258
WAN link RC-266
RIP v2 supported features RC-258
rollback
packages
displaying rollback points SMC-46
introduction SMC-10
last committed set SMC-48
rolling back to points SMC-48
ROM Monitor mode SMC-2
route dampening RC-32
route-policy (BGP) command RC-42, RC-76
route policy command IC-61
route-policy command MPC-237, RC-40, RC-75, RC-120, RC-124, RC-268, RC-269
route-policy configuration submode
set eigrp-metric command RC-124
set rip-metric command RC-269
route-policy pass-all command RC-19
route policy submode RC-40
end-policy command RC-40
See route-policy command
route processor management ethernet forwarding. See Cisco Express Forwarding
router advertisement message IC-153
router bgp address family command IC-62
router bgp address family submode
See router bgp address family command
table policy command IC-62
router bgp command IC-62, HC-306, MPC-230, MPC-233, MPC-237, RC-7, RC-138
router bgp neighbor group address family configuration mode
address family command RC-9
router bgp table policy command IC-62
route redistribution (OSPFv2, OSPFv3) RC-197
route-reflector-client command RC-74
route reflectors RC-33
router eigrp address family configuration submode RC-126
default-metric command RC-118
distance command RC-118
log-neighbor-changes command RC-128
log-neighbor-warnings command RC-128
maximum paths command RC-122
maximum-prefix command RC-123
redistribute command RC-122
redistribute maximum-prefix command RC-122
timers nsf route-hold command RC-122
router eigrp command RC-118
router eigrp configuration mode
route-policy command RC-120
router eigrp configuration submode
address-family ipv4 command RC-118
interface command RC-118
router eigrp interface configuration submode
bandwidth-percent command RC-119
holdtime command RC-118
summary-address command RC-121
router-id command MPC-12, MPC-13, MPC-15, MPC-17, MPC-57, MPC-75, MPC-77, MPC-174, RC-204
router igmp submode
nsf lifetime command MCC-30
router isis address family submode
Guest